target/linux/lantiq/dts/EASY80920.dtsi

   1 #include "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6         };
   7
   8         aliases {
   9                 led-boot = &power;
  10                 led-failsafe = &power;
  11                 led-running = &power;
  12
  13                 led-usb = &usb1;
  14                 led-usb2 = &usb2;
  15         };
  16
  17         memory@0 {
  18                 reg = <0x0 0x4000000>;
  19         };
  20
  21         fpi@10000000 {
  22                 gpio: pinmux@E100B10 {
  23                         pinctrl-names = "default";
  24                         pinctrl-0 = <&state_default>;
  25
  26                         state_default: pinmux {
  27                                 exin3 {
  28                                         lantiq,groups = "exin3";
  29                                         lantiq,function = "exin";
  30                                 };
  31                                 stp {
  32                                         lantiq,groups = "stp";
  33                                         lantiq,function = "stp";
  34                                 };
  35                                 nand {
  36                                         lantiq,groups = "nand cle", "nand ale",
  37                                                         "nand rd", "nand rdy";
  38                                         lantiq,function = "ebu";
  39                                 };
  40                                 mdio {
  41                                         lantiq,groups = "mdio";
  42                                         lantiq,function = "mdio";
  43                                 };
  44                                 pci {
  45                                         lantiq,groups = "gnt1", "req1";
  46                                         lantiq,function = "pci";
  47                                 };
  48                                 conf_out {
  49                                         lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
  50                                                         "io4", "io5", "io6", /* stp */
  51                                                         "io21",
  52                                                         "io33";
  53                                         lantiq,open-drain;
  54                                         lantiq,pull = <0>;
  55                                         lantiq,output = <1>;
  56                                 };
  57                                 pcie-rst {
  58                                         lantiq,pins = "io38";
  59                                         lantiq,pull = <0>;
  60                                         lantiq,output = <1>;
  61                                 };
  62                                 conf_in {
  63                                         lantiq,pins = "io39", /* exin3 */
  64                                                         "io48"; /* nand rdy */
  65                                         lantiq,pull = <2>;
  66                                 };
  67                         };
  68                         pins_spi_default: pins_spi_default {
  69                                 spi_in {
  70                                         lantiq,groups = "spi_di";
  71                                         lantiq,function = "spi";
  72                                 };
  73                                 spi_out {
  74                                         lantiq,groups = "spi_do", "spi_clk",
  75                                                 "spi_cs4";
  76                                         lantiq,function = "spi";
  77                                         lantiq,output = <1>;
  78                                 };
  79                         };
  80                 };
  81
  82                 stp: stp@E100BB0 {
  83                         compatible = "lantiq,gpio-stp-xway";
  84                         reg = <0xE100BB0 0x40>;
  85                         #gpio-cells = <2>;
  86                         gpio-controller;
  87
  88                         lantiq,shadow = <0xffff>;
  89                         lantiq,groups = <0x7>;
  90                         lantiq,dsl = <0x3>;
  91                         lantiq,phy1 = <0x7>;
  92                         lantiq,phy2 = <0x7>;
  93                         /* lantiq,rising; */
  94                 };
  95
  96                 ifxhcd@E101000 {
  97                         status = "okay";
  98                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  99                         lantiq,portmask = <0x3>;
 100                 };
 101         };
 102
 103         gphy-xrx200 {
 104                 compatible = "lantiq,phy-xrx200";
 105                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";
 106                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";
 107                 phys = [ 00 01 ];
 108         };
 109
 110         gpio-keys-polled {
 111                 compatible = "gpio-keys-polled";
 112                 #address-cells = <1>;
 113                 #size-cells = <0>;
 114                 poll-interval = <100>;
 115 /*              reset {
 116                         label = "reset";
 117                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 118                         linux,code = <KEY_RESTART>;
 119                 };*/
 120                 paging {
 121                         label = "paging";
 122                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 123                         linux,code = <BTN_0>;
 124                 };
 125         };
 126
 127         gpio-leds {
 128                 compatible = "gpio-leds";
 129
 130                 power: power {
 131                         label = "easy80920:green:power";
 132                         gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
 133                         default-state = "keep";
 134                 };
 135                 warning {
 136                         label = "easy80920:green:warning";
 137                         gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
 138                 };
 139                 fxs1 {
 140                         label = "easy80920:green:fxs1";
 141                         gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
 142                 };
 143                 fxs2 {
 144                         label = "easy80920:green:fxs2";
 145                         gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
 146                 };
 147                 fxo {
 148                         label = "easy80920:green:fxo";
 149                         gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
 150                 };
 151                 usb1: usb1 {
 152                         label = "easy80920:green:usb1";
 153                         gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
 154                 };
 155                 usb2: usb2 {
 156                         label = "easy80920:green:usb2";
 157                         gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
 158                 };
 159                 sd {
 160                         label = "easy80920:green:sd";
 161                         gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
 162                 };
 163                 wps {
 164                         label = "easy80920:green:wps";
 165                         gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
 166                 };
 167         };
 168 };
 169
 170 &spi {
 171         pinctrl-names = "default";
 172         pinctrl-0 = <&pins_spi_default>;
 173
 174         status = "ok";
 175
 176         m25p80@4 {
 177                 #address-cells = <1>;
 178                 #size-cells = <1>;
 179                 compatible = "jedec,spi-nor";
 180                 reg = <4 0>;
 181                 spi-max-frequency = <1000000>;
 182
 183                 partitions {
 184                         compatible = "fixed-partitions";
 185                         #address-cells = <1>;
 186                         #size-cells = <1>;
 187
 188                         partition@0 {
 189                                 reg = <0x0 0x20000>;
 190                                 label = "SPI (RO) U-Boot Image";
 191                                 read-only;
 192                         };
 193
 194                         partition@20000 {
 195                                 reg = <0x20000 0x10000>;
 196                                 label = "ENV_MAC";
 197                                 read-only;
 198                         };
 199
 200                         partition@30000 {
 201                                 reg = <0x30000 0x10000>;
 202                                 label = "DPF";
 203                                 read-only;
 204                         };
 205
 206                         partition@40000 {
 207                                 reg = <0x40000 0x10000>;
 208                                 label = "NVRAM";
 209                                 read-only;
 210                         };
 211
 212                         partition@500000 {
 213                                 reg = <0x50000 0x003a0000>;
 214                                 label = "kernel";
 215                         };
 216                 };
 217         };
 218 };
 219
 220 &eth0 {
 221         lan: interface@0 {
 222                 compatible = "lantiq,xrx200-pdi";
 223                 #address-cells = <1>;
 224                 #size-cells = <0>;
 225                 reg = <0>;
 226                 lantiq,switch;
 227
 228                 ethernet@4 {
 229                         compatible = "lantiq,xrx200-pdi-port";
 230                         reg = <4>;
 231                         phynmode0 = "gmii";
 232                         phy-handle = <&phy13>;
 233                 };
 234                 ethernet@2 {
 235                         compatible = "lantiq,xrx200-pdi-port";
 236                         reg = <2>;
 237                         phy-mode = "gmii";
 238                         phy-handle = <&phy11>;
 239                 };
 240                 ethernet@1 {
 241                         compatible = "lantiq,xrx200-pdi-port";
 242                         reg = <1>;
 243                         phy-mode = "rgmii";
 244                         phy-handle = <&phy1>;
 245                 };
 246                 ethernet@0 {
 247                         compatible = "lantiq,xrx200-pdi-port";
 248                         reg = <0>;
 249                         phy-mode = "rgmii";
 250                         phy-handle = <&phy0>;
 251                 };
 252         };
 253
 254         wan: interface@1 {
 255                 compatible = "lantiq,xrx200-pdi";
 256                 #address-cells = <1>;
 257                 #size-cells = <0>;
 258                 reg = <1>;
 259                 lantiq,wan;
 260
 261                 ethernet@5 {
 262                         compatible = "lantiq,xrx200-pdi-port";
 263                         reg = <5>;
 264                         phy-mode = "rgmii";
 265                         phy-handle = <&phy5>;
 266                 };
 267         };
 268
 269         mdio@0 {
 270                 #address-cells = <1>;
 271                 #size-cells = <0>;
 272                 compatible = "lantiq,xrx200-mdio";
 273                 phy0: ethernet-phy@0 {
 274                         reg = <0x0>;
 275                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 276                 };
 277                 phy1: ethernet-phy@1 {
 278                         reg = <0x1>;
 279                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 280                 };
 281                 phy5: ethernet-phy@5 {
 282                         reg = <0x5>;
 283                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 284                 };
 285                 phy11: ethernet-phy@11 {
 286                         reg = <0x11>;
 287                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 288                 };
 289                 phy13: ethernet-phy@13 {
 290                         reg = <0x13>;
 291                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 292                 };
 293         };
 294 };