5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
15 compatible = "lantiq,fpi", "simple-bus";
16 ranges = <0x0 0x10000000 0xEEFFFFF>;
17 reg = <0x10000000 0xEF00000>;
22 compatible = "lantiq,localbus", "simple-bus";
27 compatible = "lantiq,spi-xway-broken";
28 reg = <0xE100800 0x100>;
29 interrupt-parent = <&icu0>;
30 interrupts = <22 23 24>;
37 compatible = "jedec,spi-nor";
39 spi-max-frequency = <1000000>;
43 label = "SPI (RO) U-Boot Image";
48 reg = <0x20000 0x10000>;
54 reg = <0x30000 0x10000>;
60 reg = <0x40000 0x10000>;
66 reg = <0x50000 0x003a0000>;
72 gpio: pinmux@E100B10 {
73 compatible = "lantiq,pinctrl-xr9";
74 pinctrl-names = "default";
75 pinctrl-0 = <&state_default>;
77 interrupt-parent = <&icu0>;
78 interrupts = <166 135 66 40 41 42 38>;
82 reg = <0xE100B10 0xA0>;
84 state_default: pinmux {
86 lantiq,groups = "exin3";
87 lantiq,function = "exin";
90 lantiq,groups = "stp";
91 lantiq,function = "stp";
94 lantiq,groups = "spi", "spi_cs4";
95 lantiq,function = "spi";
98 lantiq,groups = "nand cle", "nand ale",
99 "nand rd", "nand rdy";
100 lantiq,function = "ebu";
103 lantiq,groups = "mdio";
104 lantiq,function = "mdio";
107 lantiq,groups = "gnt1", "req1";
108 lantiq,function = "pci";
111 lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
112 "io4", "io5", "io6", /* stp */
120 lantiq,pins = "io38";
125 lantiq,pins = "io39", /* exin3 */
126 "io48"; /* nand rdy */
133 #address-cells = <1>;
135 compatible = "lantiq,xrx200-net";
136 reg = < 0xE108000 0x3000 /* switch */
137 0xE10B100 0x70 /* mdio */
138 0xE10B1D8 0x30 /* mii */
139 0xE10B308 0x30 /* pmac */
141 interrupt-parent = <&icu0>;
142 interrupts = <73 72>;
145 compatible = "lantiq,xrx200-pdi";
146 #address-cells = <1>;
149 mac-address = [ 00 11 22 33 44 55 ];
152 compatible = "lantiq,xrx200-pdi-port";
155 phy-handle = <&phy0>;
158 compatible = "lantiq,xrx200-pdi-port";
161 phy-handle = <&phy1>;
164 compatible = "lantiq,xrx200-pdi-port";
167 phy-handle = <&phy11>;
172 compatible = "lantiq,xrx200-pdi";
173 #address-cells = <1>;
176 mac-address = [ 00 11 22 33 44 56 ];
179 compatible = "lantiq,xrx200-pdi-port";
182 phy-handle = <&phy5>;
187 compatible = "lantiq,xrx200-pdi";
188 #address-cells = <1>;
191 mac-address = [ 00 11 22 33 44 57 ];
193 compatible = "lantiq,xrx200-pdi-port";
196 phy-handle = <&phy13>;
201 #address-cells = <1>;
203 compatible = "lantiq,xrx200-mdio";
204 phy0: ethernet-phy@0 {
206 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
208 phy1: ethernet-phy@1 {
210 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
212 phy5: ethernet-phy@5 {
214 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
216 phy11: ethernet-phy@11 {
218 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
220 phy13: ethernet-phy@13 {
222 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
228 compatible = "lantiq,gpio-stp-xway";
229 reg = <0xE100BB0 0x40>;
233 lantiq,shadow = <0xffff>;
234 lantiq,groups = <0x7>;
243 gpios = <&gpio 33 0>;
244 lantiq,portmask = <0x3>;
248 #address-cells = <3>;
250 #interrupt-cells = <1>;
251 compatible = "lantiq,pci-xway1";
252 bus-range = <0x0 0x0>;
253 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
254 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
255 reg = <0x7000000 0x8000 /* config space */
256 0xE105400 0x400>; /* pci bridge */
257 lantiq,bus-clock = <33333333>;
258 /*lantiq,external-clock;*/
259 lantiq,delay-hi = <0>; /* 0ns delay */
260 lantiq,delay-lo = <0>; /* 0.0ns delay */
261 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
263 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
265 gpios-reset = <&gpio 21 0>;
266 req-mask = <0x1>; /* GNT1 */
271 compatible = "lantiq,phy-xrx200";
272 firmware = "lantiq/vr9_phy11g_a2x.bin";
277 compatible = "gpio-keys-polled";
278 #address-cells = <1>;
280 poll-interval = <100>;
284 linux,code = <0x198>;
288 gpios = <&gpio 11 1>;
289 linux,code = <0x100>;
294 compatible = "gpio-leds";
299 default-state = "on";