target/linux/lantiq/dts/EASY80920.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         aliases {
  11                 led-boot = &power;
  12                 led-failsafe = &power;
  13                 led-running = &power;
  14
  15                 led-usb = &usb1;
  16                 led-usb2 = &usb2;
  17         };
  18
  19         memory@0 {
  20                 reg = <0x0 0x4000000>;
  21         };
  22
  23         fpi@10000000 {
  24                 gpio: pinmux@E100B10 {
  25                         pinctrl-names = "default";
  26                         pinctrl-0 = <&state_default>;
  27
  28                         state_default: pinmux {
  29                                 exin3 {
  30                                         lantiq,groups = "exin3";
  31                                         lantiq,function = "exin";
  32                                 };
  33                                 stp {
  34                                         lantiq,groups = "stp";
  35                                         lantiq,function = "stp";
  36                                 };
  37                                 nand {
  38                                         lantiq,groups = "nand cle", "nand ale",
  39                                                         "nand rd", "nand rdy";
  40                                         lantiq,function = "ebu";
  41                                 };
  42                                 mdio {
  43                                         lantiq,groups = "mdio";
  44                                         lantiq,function = "mdio";
  45                                 };
  46                                 pci {
  47                                         lantiq,groups = "gnt1", "req1";
  48                                         lantiq,function = "pci";
  49                                 };
  50                                 conf_out {
  51                                         lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
  52                                                         "io4", "io5", "io6", /* stp */
  53                                                         "io21",
  54                                                         "io33";
  55                                         lantiq,open-drain;
  56                                         lantiq,pull = <0>;
  57                                         lantiq,output = <1>;
  58                                 };
  59                                 pcie-rst {
  60                                         lantiq,pins = "io38";
  61                                         lantiq,pull = <0>;
  62                                         lantiq,output = <1>;
  63                                 };
  64                                 conf_in {
  65                                         lantiq,pins = "io39", /* exin3 */
  66                                                         "io48"; /* nand rdy */
  67                                         lantiq,pull = <2>;
  68                                 };
  69                         };
  70                         pins_spi_default: pins_spi_default {
  71                                 spi_in {
  72                                         lantiq,groups = "spi_di";
  73                                         lantiq,function = "spi";
  74                                 };
  75                                 spi_out {
  76                                         lantiq,groups = "spi_do", "spi_clk",
  77                                                 "spi_cs4";
  78                                         lantiq,function = "spi";
  79                                         lantiq,output = <1>;
  80                                 };
  81                         };
  82                 };
  83
  84                 stp: stp@E100BB0 {
  85                         compatible = "lantiq,gpio-stp-xway";
  86                         reg = <0xE100BB0 0x40>;
  87                         #gpio-cells = <2>;
  88                         gpio-controller;
  89
  90                         lantiq,shadow = <0xffff>;
  91                         lantiq,groups = <0x7>;
  92                         lantiq,dsl = <0x3>;
  93                         lantiq,phy1 = <0x7>;
  94                         lantiq,phy2 = <0x7>;
  95                         /* lantiq,rising; */
  96                 };
  97
  98                 ifxhcd@E101000 {
  99                         status = "okay";
 100                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 101                         lantiq,portmask = <0x3>;
 102                 };
 103         };
 104
 105         gphy-xrx200 {
 106                 compatible = "lantiq,phy-xrx200";
 107                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";
 108                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";
 109                 phys = [ 00 01 ];
 110         };
 111
 112         gpio-keys-polled {
 113                 compatible = "gpio-keys-polled";
 114                 #address-cells = <1>;
 115                 #size-cells = <0>;
 116                 poll-interval = <100>;
 117 /*              reset {
 118                         label = "reset";
 119                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 120                         linux,code = <KEY_RESTART>;
 121                 };*/
 122                 paging {
 123                         label = "paging";
 124                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 125                         linux,code = <KEY_PHONE>;
 126                 };
 127         };
 128
 129         gpio-leds {
 130                 compatible = "gpio-leds";
 131
 132                 power: power {
 133                         label = "easy80920:green:power";
 134                         gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
 135                         default-state = "keep";
 136                 };
 137                 warning {
 138                         label = "easy80920:green:warning";
 139                         gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
 140                 };
 141                 fxs1 {
 142                         label = "easy80920:green:fxs1";
 143                         gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
 144                 };
 145                 fxs2 {
 146                         label = "easy80920:green:fxs2";
 147                         gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
 148                 };
 149                 fxo {
 150                         label = "easy80920:green:fxo";
 151                         gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
 152                 };
 153                 usb1: usb1 {
 154                         label = "easy80920:green:usb1";
 155                         gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
 156                 };
 157                 usb2: usb2 {
 158                         label = "easy80920:green:usb2";
 159                         gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
 160                 };
 161                 sd {
 162                         label = "easy80920:green:sd";
 163                         gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
 164                 };
 165                 wps {
 166                         label = "easy80920:green:wps";
 167                         gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
 168                 };
 169         };
 170 };
 171
 172 &spi {
 173         pinctrl-names = "default";
 174         pinctrl-0 = <&pins_spi_default>;
 175
 176         status = "ok";
 177
 178         m25p80@4 {
 179                 #address-cells = <1>;
 180                 #size-cells = <1>;
 181                 compatible = "jedec,spi-nor";
 182                 reg = <4 0>;
 183                 spi-max-frequency = <1000000>;
 184
 185                 partitions {
 186                         compatible = "fixed-partitions";
 187                         #address-cells = <1>;
 188                         #size-cells = <1>;
 189
 190                         partition@0 {
 191                                 reg = <0x0 0x20000>;
 192                                 label = "SPI (RO) U-Boot Image";
 193                                 read-only;
 194                         };
 195
 196                         partition@20000 {
 197                                 reg = <0x20000 0x10000>;
 198                                 label = "ENV_MAC";
 199                                 read-only;
 200                         };
 201
 202                         partition@30000 {
 203                                 reg = <0x30000 0x10000>;
 204                                 label = "DPF";
 205                                 read-only;
 206                         };
 207
 208                         partition@40000 {
 209                                 reg = <0x40000 0x10000>;
 210                                 label = "NVRAM";
 211                                 read-only;
 212                         };
 213
 214                         partition@500000 {
 215                                 reg = <0x50000 0x003a0000>;
 216                                 label = "kernel";
 217                         };
 218                 };
 219         };
 220 };
 221
 222 &eth0 {
 223         lan: interface@0 {
 224                 compatible = "lantiq,xrx200-pdi";
 225                 #address-cells = <1>;
 226                 #size-cells = <0>;
 227                 reg = <0>;
 228                 lantiq,switch;
 229
 230                 ethernet@4 {
 231                         compatible = "lantiq,xrx200-pdi-port";
 232                         reg = <4>;
 233                         phynmode0 = "gmii";
 234                         phy-handle = <&phy13>;
 235                 };
 236                 ethernet@2 {
 237                         compatible = "lantiq,xrx200-pdi-port";
 238                         reg = <2>;
 239                         phy-mode = "gmii";
 240                         phy-handle = <&phy11>;
 241                 };
 242                 ethernet@1 {
 243                         compatible = "lantiq,xrx200-pdi-port";
 244                         reg = <1>;
 245                         phy-mode = "rgmii";
 246                         phy-handle = <&phy1>;
 247                 };
 248                 ethernet@0 {
 249                         compatible = "lantiq,xrx200-pdi-port";
 250                         reg = <0>;
 251                         phy-mode = "rgmii";
 252                         phy-handle = <&phy0>;
 253                 };
 254         };
 255
 256         wan: interface@1 {
 257                 compatible = "lantiq,xrx200-pdi";
 258                 #address-cells = <1>;
 259                 #size-cells = <0>;
 260                 reg = <1>;
 261                 lantiq,wan;
 262
 263                 ethernet@5 {
 264                         compatible = "lantiq,xrx200-pdi-port";
 265                         reg = <5>;
 266                         phy-mode = "rgmii";
 267                         phy-handle = <&phy5>;
 268                 };
 269         };
 270
 271         mdio@0 {
 272                 #address-cells = <1>;
 273                 #size-cells = <0>;
 274                 compatible = "lantiq,xrx200-mdio";
 275                 phy0: ethernet-phy@0 {
 276                         reg = <0x0>;
 277                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 278                 };
 279                 phy1: ethernet-phy@1 {
 280                         reg = <0x1>;
 281                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 282                 };
 283                 phy5: ethernet-phy@5 {
 284                         reg = <0x5>;
 285                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 286                 };
 287                 phy11: ethernet-phy@11 {
 288                         reg = <0x11>;
 289                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 290                 };
 291                 phy13: ethernet-phy@13 {
 292                         reg = <0x13>;
 293                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 294                 };
 295         };
 296 };