6 model = "BTHOMEHUBV5A - BT Home Hub 5A";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 failsafe = &power_red;
14 running = &power_blue;
16 internet = &broadband_blue;
17 wifi = &wireless_blue;
22 reg = <0x0 0x8000000>;
26 compatible = "lantiq,cputemp";
32 compatible = "gen_nand", "lantiq,nand-xway";
35 reg = <0x1 0x0 0x2000000>;
40 compatible = "fixed-partitions";
51 reg = <0x40000 0x40000>;
53 caldata: partition@80000 {
55 reg = <0x80000 0x20000>;
60 reg = <0xa0000 0x200000>;
64 reg = <0x2a0000 0x7d60000>;
70 gpio: pinmux@E100B10 {
71 pinctrl-names = "default";
72 pinctrl-0 = <&state_default>;
74 interrupt-parent = <&icu0>;
75 interrupts = <166 135 66 40 41 42 38>;
77 state_default: pinmux {
79 lantiq,groups = "mdio";
80 lantiq,function = "mdio";
96 lantiq,open-drain = <0>;
100 lantiq,groups = "nand cle", "nand ale";
101 lantiq,function = "ebu";
103 lantiq,open-drain = <0>;
107 lantiq,groups = "nand cs1";
108 lantiq,function = "ebu";
109 lantiq,open-drain = <0>;
117 gpios = <&gpio 33 0>;
122 lantiq,bus-clock = <33333333>;
123 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
124 interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
125 gpio-reset = <&gpio 21 0>;
130 compatible = "lantiq,phy-xrx200";
131 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
132 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
137 compatible = "ath9k,eeprom";
138 ath,eep-flash = <&caldata 0x1000>;
139 ath,mac-offset = <0x110c>;
140 ath,mac-increment = <2>;
141 ath,pci-slot = <0xe>; /* 14 */
145 compatible = "gpio-keys-polled";
146 #address-cells = <1>;
148 poll-interval = <100>;
153 linux,code = <0x198>;
158 gpios = <&gpio 25 1>;
159 linux,code = <0x211>;
164 gpios = <&gpio 39 1>;
170 compatible = "gpio-leds";
172 /* broadband-* is a single RGB led */
174 label = "bthomehubv5a:red:broadband";
178 label = "bthomehubv5a:green:broadband";
181 broadband_blue: broadband-blue {
182 label = "bthomehubv5a:blue:broadband";
186 /* wireless-* is a single RGB led */
188 label = "bthomehubv5a:red:wireless";
192 label = "bthomehubv5a:green:wireless";
193 gpios = <&gpio 10 1>;
195 wireless_blue: wireless-blue {
196 label = "bthomehubv5a:blue:wireless";
197 gpios = <&gpio 11 1>;
200 /* power-* is a single RGB led */
201 power_red: power-red {
202 label = "bthomehubv5a:red:power";
203 gpios = <&gpio 12 1>;
205 power_green: power-green {
206 label = "bthomehubv5a:green:power";
207 gpios = <&gpio 14 1>;
208 default-state = "keep";
210 power_blue: power-blue {
211 label = "bthomehubv5a:blue:power";
212 gpios = <&gpio 15 1>;
217 gpios = <&gpio 19 0>;
224 compatible = "lantiq,xrx200-pdi";
225 #address-cells = <1>;
228 mtd-mac-address = <&caldata 0x110c>;
232 compatible = "lantiq,xrx200-pdi-port";
235 phy-handle = <&phy0>;
238 compatible = "lantiq,xrx200-pdi-port";
241 phy-handle = <&phy1>;
244 compatible = "lantiq,xrx200-pdi-port";
247 phy-handle = <&phy11>;
250 compatible = "lantiq,xrx200-pdi-port";
253 phy-handle = <&phy13>;
258 compatible = "lantiq,xrx200-pdi";
259 #address-cells = <1>;
262 mtd-mac-address = <&caldata 0x110c>;
263 mtd-mac-address-increment = <4>;
267 compatible = "lantiq,xrx200-pdi-port";
270 phy-handle = <&phy5>;
275 #address-cells = <1>;
277 compatible = "lantiq,xrx200-mdio";
279 phy0: ethernet-phy@0 {
281 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
283 phy1: ethernet-phy@1 {
285 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
287 phy5: ethernet-phy@5 {
289 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
291 phy11: ethernet-phy@11 {
293 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
295 phy13: ethernet-phy@13 {
297 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";