target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 / {
   6         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_red;
  15                 led-running = &power_blue;
  16
  17                 led-internet = &broadband_blue;
  18                 led-wifi = &wireless_blue;
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x8000000>;
  23         };
  24
  25         fpi@10000000 {
  26                 localbus@0 {
  27                         nand-parts@0 {
  28                                 compatible = "gen_nand", "lantiq,nand-xway";
  29                                 lantiq,cs = <1>;
  30                                 bank-width = <2>;
  31                                 reg = <0x1 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partitions {
  36                                         compatible = "fixed-partitions";
  37                                         #address-cells = <1>;
  38                                         #size-cells = <1>;
  39
  40                                         partition@0 {
  41                                                 label = "u-boot";
  42                                                 reg = <0x0 0x40000>;
  43                                                 read-only;
  44                                         };
  45                                         partition@40000 {
  46                                                 label = "uboot-env";
  47                                                 reg = <0x40000 0x40000>;
  48                                         };
  49                                         caldata: partition@80000 {
  50                                                 label = "caldata";
  51                                                 reg = <0x80000 0x20000>;
  52                                                 read-only;
  53                                         };
  54                                         partition@a0000 {
  55                                                 label = "kernel";
  56                                                 reg = <0xa0000 0x200000>;
  57                                         };
  58                                         partition@2a0000 {
  59                                                 label = "ubi";
  60                                                 reg = <0x2a0000 0x7d60000>;
  61                                         };
  62                                 };
  63                         };
  64                 };
  65
  66                 gpio: pinmux@E100B10 {
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&state_default>;
  69
  70                         state_default: pinmux {
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 pci_rst {
  76                                         lantiq,pins = "io21";
  77                                         lantiq,output = <1>;
  78                                         lantiq,open-drain;
  79                                 };
  80                                 pcie_rst {
  81                                         lantiq,pins = "io38";
  82                                         lantiq,pull = <0>;
  83                                         lantiq,output = <1>;
  84                                         lantiq,open-drain;
  85                                 };
  86                                 usb_vbus {
  87                                         lantiq,pins = "io33";
  88                                         lantiq,pull = <0>;
  89                                         lantiq,open-drain = <0>;
  90                                         lantiq,output = <1>;
  91                                 };
  92                                 nand_out {
  93                                         lantiq,groups = "nand cle", "nand ale";
  94                                         lantiq,function = "ebu";
  95                                         lantiq,output = <1>;
  96                                         lantiq,open-drain = <0>;
  97                                         lantiq,pull = <0>;
  98                                 };
  99                                 nand_cs1 {
 100                                         lantiq,groups = "nand cs1";
 101                                         lantiq,function = "ebu";
 102                                         lantiq,open-drain = <0>;
 103                                         lantiq,pull = <0>;
 104                                 };
 105                         };
 106                 };
 107
 108                 ifxhcd@E101000 {
 109                         status = "okay";
 110                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 111                 };
 112
 113                 pci@E105400 {
 114                         status = "okay";
 115                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 116                 };
 117         };
 118
 119         gphy-xrx200 {
 120                 compatible = "lantiq,phy-xrx200";
 121                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 122                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 123                 phys = [ 00 01 ];
 124         };
 125
 126         ath9k_eep {
 127                 compatible = "ath9k,eeprom";
 128                 ath,eep-flash = <&caldata 0x1000>;
 129                 ath,mac-offset = <0x110c>;
 130                 ath,mac-increment = <2>;
 131                 ath,pci-slot = <0xe>; /* 14 */
 132         };
 133
 134         gpio-keys-polled {
 135                 compatible = "gpio-keys-polled";
 136                 #address-cells = <1>;
 137                 #size-cells = <0>;
 138                 poll-interval = <100>;
 139
 140                 reset {
 141                         label = "reset";
 142                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 143                         linux,code = <KEY_RESTART>;
 144                 };
 145
 146                 wps {
 147                         label = "wps";
 148                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
 149                         linux,code = <KEY_WPS_BUTTON>;
 150                 };
 151
 152                 restart {
 153                         label = "restart";
 154                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 155                         linux,code = <KEY_POWER>;
 156                 };
 157         };
 158
 159         gpio-leds {
 160                 compatible = "gpio-leds";
 161
 162                 /* broadband-* is a single RGB led */
 163                 broadband-red {
 164                         label = "bthomehubv5a:red:broadband";
 165                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 166                 };
 167                 broadband-green {
 168                         label = "bthomehubv5a:green:broadband";
 169                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 170                 };
 171                 broadband_blue: broadband-blue {
 172                         label = "bthomehubv5a:blue:broadband";
 173                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 174                 };
 175
 176                 /* wireless-* is a single RGB led */
 177                 wireless-red {
 178                         label = "bthomehubv5a:red:wireless";
 179                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 180                 };
 181                 wireless-green {
 182                         label = "bthomehubv5a:green:wireless";
 183                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 184                 };
 185                 wireless_blue: wireless-blue {
 186                         label = "bthomehubv5a:blue:wireless";
 187                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 188                 };
 189
 190                 /* power-* is a single RGB led */
 191                 power_red: power-red {
 192                         label = "bthomehubv5a:red:power";
 193                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 194                 };
 195                 power_green: power-green {
 196                         label = "bthomehubv5a:green:power";
 197                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 198                         default-state = "keep";
 199                 };
 200                 power_blue: power-blue {
 201                         label = "bthomehubv5a:blue:power";
 202                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 203                 };
 204
 205                 dimmed {
 206                         label = "dimmed";
 207                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 208                 };
 209         };
 210 };
 211
 212 &eth0 {
 213         lan: interface@0 {
 214                 compatible = "lantiq,xrx200-pdi";
 215                 #address-cells = <1>;
 216                 #size-cells = <0>;
 217                 reg = <0>;
 218                 mtd-mac-address = <&caldata 0x110c>;
 219                 lantiq,switch;
 220
 221                 ethernet@0 {
 222                         compatible = "lantiq,xrx200-pdi-port";
 223                         reg = <0>;
 224                         phy-mode = "rgmii";
 225                         phy-handle = <&phy0>;
 226                 };
 227                 ethernet@1 {
 228                         compatible = "lantiq,xrx200-pdi-port";
 229                         reg = <1>;
 230                         phy-mode = "rgmii";
 231                         phy-handle = <&phy1>;
 232                 };
 233                 ethernet@2 {
 234                         compatible = "lantiq,xrx200-pdi-port";
 235                         reg = <2>;
 236                         phy-mode = "gmii";
 237                         phy-handle = <&phy11>;
 238                 };
 239                 ethernet@4 {
 240                         compatible = "lantiq,xrx200-pdi-port";
 241                         reg = <4>;
 242                         phy-mode = "gmii";
 243                         phy-handle = <&phy13>;
 244                 };
 245         };
 246
 247         wan: interface@1 {
 248                 compatible = "lantiq,xrx200-pdi";
 249                 #address-cells = <1>;
 250                 #size-cells = <0>;
 251                 reg = <1>;
 252                 mtd-mac-address = <&caldata 0x110c>;
 253                 mtd-mac-address-increment = <4>;
 254                 lantiq,wan;
 255
 256                 ethernet@5 {
 257                         compatible = "lantiq,xrx200-pdi-port";
 258                         reg = <5>;
 259                         phy-mode = "rgmii";
 260                         phy-handle = <&phy5>;
 261                 };
 262         };
 263
 264         mdio@0 {
 265                 #address-cells = <1>;
 266                 #size-cells = <0>;
 267                 compatible = "lantiq,xrx200-mdio";
 268
 269                 phy0: ethernet-phy@0 {
 270                         reg = <0x0>;
 271                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 272                 };
 273                 phy1: ethernet-phy@1 {
 274                         reg = <0x1>;
 275                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 276                 };
 277                 phy5: ethernet-phy@5 {
 278                         reg = <0x5>;
 279                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 280                 };
 281                 phy11: ethernet-phy@11 {
 282                         reg = <0x11>;
 283                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 284                 };
 285                 phy13: ethernet-phy@13 {
 286                         reg = <0x13>;
 287                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 288                 };
 289         };
 290 };