6 model = "BTHOMEHUBV3A - BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 led-boot = &power_orange;
14 led-failsafe = &power_red;
15 led-running = &power_blue;
17 led-internet = &broadband_blue;
18 led-wifi = &wireless_blue;
21 memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
22 reg = <0x0 0x4000000>;
28 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
34 nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
35 compatible = "gen_nand", "lantiq,nand-xway";
38 reg = <1 0x0 0x2000000 >;
41 req-mask = <0x1>; /* PCI request lines to mask during NAND access */
44 compatible = "fixed-partitions";
50 reg = <0x00000 0x8000>;
55 reg = <0x8000 0x05c000>;
60 reg = <0x64000 0x004000>;
62 ath9k_cal: partition@68000 {
64 reg = <0x68000 0x004000>;
68 reg = <0x6c000 0x200000>;
72 reg = <0x26c000 0x1d94000>;
78 compatible = "ath9k,eeprom";
79 ath,eep-flash = <&ath9k_cal 0x0000>;
85 gpio: pinmux@E100B10 {
86 pinctrl-names = "default";
87 pinctrl-0 = <&state_default>;
89 state_default: pinmux {
91 lantiq,groups = "nand cle", "nand ale";
92 lantiq,function = "ebu";
94 lantiq,open-drain = <0>;
98 lantiq,groups = "nand cs1";
99 lantiq,function = "ebu";
100 lantiq,open-drain = <0>;
105 lantiq,groups = "req1";
106 lantiq,function = "pci";
108 lantiq,open-drain = <1>;
112 lantiq,groups = "gnt1";
113 lantiq,function = "pci";
115 lantiq,open-drain = <0>;
120 lantiq,pins = "io21";
122 lantiq,open-drain = <0>;
133 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
138 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
143 compatible = "gpio-keys-polled";
144 #address-cells = <1>;
146 poll-interval = <100>;
149 gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
150 linux,code = <KEY_RESTART>;
154 gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
155 linux,code = <KEY_RESTART>;
159 gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
160 linux,code = <KEY_WPS_BUTTON>;
165 compatible = "gpio-leds";
168 label = "bthomehubv3a:red:wireless";
169 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
172 label = "bthomehubv3a:orange:wireless";
173 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
175 wireless_blue: wireless-blue {
176 label = "bthomehubv3a:blue:wireless";
177 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
181 label = "bthomehubv3a:red:broadband";
182 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
185 label = "bthomehubv3a:orange:broadband";
186 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
188 broadband_blue: broadband-blue {
189 label = "bthomehubv3a:blue:broadband";
190 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
193 power_red: power-red {
194 label = "bthomehubv3a:red:power";
195 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
197 power_orange: power-orange {
198 label = "bthomehubv3a:orange:power";
199 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
200 default-state = "keep";
202 power_blue: power-blue {
203 label = "bthomehubv3a:blue:power";
204 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;