6 model = "BTHOMEHUBV3A - BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 led-boot = &power_orange;
14 led-failsafe = &power_red;
15 led-running = &power_blue;
17 led-internet = &broadband_blue;
18 led-wifi = &wireless_blue;
21 memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
22 reg = <0x0 0x4000000>;
38 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
39 1 0 0x4000000 0x4000010>; /* addsel1 */
40 compatible = "lantiq,localbus", "simple-bus";
42 nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
43 compatible = "gen_nand", "lantiq,nand-xway";
46 reg = <1 0x0 0x2000000 >;
49 req-mask = <0x1>; /* PCI request lines to mask during NAND access */
52 compatible = "fixed-partitions";
58 reg = <0x00000 0x8000>;
63 reg = <0x8000 0x05c000>;
68 reg = <0x64000 0x004000>;
70 ath9k_cal: partition@68000 {
72 reg = <0x68000 0x004000>;
76 reg = <0x6c000 0x200000>;
80 reg = <0x26c000 0x1d94000>;
86 compatible = "ath9k,eeprom";
87 ath,eep-flash = <&ath9k_cal 0x0000>;
93 gpio: pinmux@E100B10 {
94 compatible = "lantiq,pinctrl-xr9";
95 pinctrl-names = "default";
96 pinctrl-0 = <&state_default>;
100 reg = <0xE100B10 0xA0>;
102 state_default: pinmux {
104 lantiq,groups = "nand cle", "nand ale";
105 lantiq,function = "ebu";
107 lantiq,open-drain = <0>;
111 lantiq,groups = "nand cs1";
112 lantiq,function = "ebu";
113 lantiq,open-drain = <0>;
118 lantiq,groups = "req1";
119 lantiq,function = "pci";
121 lantiq,open-drain = <1>;
125 lantiq,groups = "gnt1";
126 lantiq,function = "pci";
128 lantiq,open-drain = <0>;
133 lantiq,pins = "io21";
135 lantiq,open-drain = <0>;
146 gpios = <&gpio 33 0>;
151 gpio-reset = <&gpio 21 0>;
157 compatible = "gpio-keys-polled";
158 #address-cells = <1>;
160 poll-interval = <100>;
163 gpios = <&gpio 54 1>;
164 linux,code = <0x198>;
168 gpios = <&gpio 52 1>;
169 linux,code = <0x198>;
173 gpios = <&gpio 53 1>;
174 linux,code = <0x211>;
179 compatible = "gpio-leds";
182 label = "bthomehubv3a:red:wireless";
186 label = "bthomehubv3a:orange:wireless";
189 wireless_blue: wireless-blue {
190 label = "bthomehubv3a:blue:wireless";
195 label = "bthomehubv3a:red:broadband";
196 gpios = <&gpio 11 1>;
199 label = "bthomehubv3a:orange:broadband";
202 broadband_blue: broadband-blue {
203 label = "bthomehubv3a:blue:broadband";
204 gpios = <&gpio 12 1>;
207 power_red: power-red {
208 label = "bthomehubv3a:red:power";
209 gpios = <&gpio 14 1>;
211 power_orange: power-orange {
212 label = "bthomehubv3a:orange:power";
214 default-state = "keep";
216 power_blue: power-blue {
217 label = "bthomehubv3a:blue:power";