3 /include/ "danube.dtsi"
6 model = "BTHOMEHUBV2B - BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
13 reg = <0x0 0x4000000>;
29 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
30 1 0 0x4000000 0x4000010>; /* addsel1 */
31 compatible = "lantiq,localbus", "simple-bus";
33 nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
34 compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
37 reg = <0 0x0 0x80000>;
43 reg = <0x00000 0x40000>; /* 256KB */
48 reg = <0x40000 0x10000>; /* 64KB */
53 reg = <0x50000 0x10000>;
58 reg = <0x60000 0x10000>;
62 label = "rg_conf_factory";
63 reg = <0x70000 0x10000>;
67 nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
68 compatible = "gen_nand", "lantiq,nand-xway";
71 reg = <1 0x0 0x2000000 >;
74 req-mask = <0x1>; /* PCI request lines to mask during NAND access */
76 ath9k_cal: partition@0 {
77 label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
78 reg = <0x00000 0x4000>;
84 reg = <0x4000 0x200000>;
89 reg = <0x204000 0x1DFC000>;
96 compatible = "ath9k,eeprom";
97 ath,eep-flash = <&ath9k_cal 0x0000>;
98 ath,mac-increment = <1>;
104 gpio: pinmux@E100B10 {
105 compatible = "lantiq,pinctrl-xway";
106 pinctrl-names = "default";
107 pinctrl-0 = <&state_default>;
111 reg = <0xE100B10 0xA0>;
113 state_default: pinmux {
115 lantiq,groups = "stp";
116 lantiq,function = "stp";
118 lantiq,open-drain = <0>;
122 lantiq,groups = "nand cle", "nand ale";
123 lantiq,function = "ebu";
125 lantiq,open-drain = <0>;
129 lantiq,groups = "nand cs1";
130 lantiq,function = "ebu";
131 lantiq,open-drain = <0>;
135 lantiq,groups = "exin1";
136 lantiq,function = "exin";
139 lantiq,groups = "req1";
140 lantiq,function = "pci";
142 lantiq,open-drain = <1>;
146 lantiq,groups = "gnt1";
147 lantiq,function = "pci";
149 lantiq,open-drain = <0>;
154 lantiq,pins = "io21";
156 lantiq,open-drain = <0>;
160 lantiq,pins = "io2", "io15", "io22";
162 lantiq,open-drain = <1>;
169 compatible = "lantiq,etop-xway";
170 reg = <0xE180000 0x40000>;
171 interrupt-parent = <&icu0>;
172 interrupts = <73 78>;
174 mac-address = [ 00 11 22 33 44 55 ];
184 compatible = "lantiq,gpio-stp-xway";
186 reg = <0xE100BB0 0x40>;
188 lantiq,shadow = <0xfff>;
189 lantiq,groups = <0x3>;
194 lantiq,bus-clock = <33333333>;
195 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
196 interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
197 gpio-reset = <&gpio 21 0>;
198 req-mask = <0x1>; /* GNT1 */
204 compatible = "gpio-keys-polled";
205 #address-cells = <1>;
207 poll-interval = <100>;
212 linux,code = <0x198>;
215 label = "findhandset";
216 gpios = <&gpio 15 1>;
217 linux,code = <0x101>;
221 gpios = <&gpio 22 1>;
222 linux,code = <0x211>;
227 compatible = "gpio-leds";
230 label = "soc:orange:upgrading";
235 label = "soc:orange:phone";
239 label = "soc:blue:phone";
244 label = "soc:orange:wireless";
248 label = "soc:blue:wireless";
253 label = "soc:red:broadband";
254 gpios = <&stp0 10 0>;
257 label = "soc:orange:broadband";
258 gpios = <&stp0 11 0>;
261 label = "soc:blue:broadband";
262 gpios = <&stp0 12 0>;
266 label = "soc:red:power";
267 gpios = <&stp0 13 0>;
270 label = "soc:orange:power";
271 gpios = <&stp0 14 0>;
274 label = "soc:blue:power";
275 gpios = <&stp0 15 0>;