target/linux/lantiq/dts/ASL56026.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ASL56026 - BT OpenReach VDSL Modem";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18
  19                 led-dsl = &dsl;
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x2000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nor-boot@0 {
  29                                 compatible = "lantiq,nor";
  30                                 bank-width = <2>;
  31                                 reg = <0 0x0 0x0800000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partitions {
  36                                         compatible = "fixed-partitions";
  37                                         #address-cells = <1>;
  38                                         #size-cells = <1>;
  39
  40                                         partition@0 {
  41                                                 label = "uboot";
  42                                                 reg = <0x0 0x30000>;
  43                                         };
  44
  45                                         partition@30000 {
  46                                                 label = "uboot_env";
  47                                                 reg = <0x30000 0x10000>;
  48                                         };
  49
  50                                         partition@40000 {
  51                                                 label = "firmware";
  52                                                 reg = <0x40000 0x750000>;
  53                                         };
  54
  55                                         partition@790000 {
  56                                                 label = "ddrconfig";
  57                                                 reg = <0x790000 0x70000>;
  58                                                 read-only;
  59                                         };
  60                                 };
  61                         };
  62                 };
  63
  64                 gpio: pinmux@E100B10 {
  65                         pinctrl-names = "default";
  66                         pinctrl-0 = <&state_default>;
  67
  68                         state_default: pinmux {
  69                                 mdio {
  70                                         lantiq,groups = "mdio";
  71                                         lantiq,function = "mdio";
  72                                 };
  73                         };
  74                 };
  75         };
  76
  77         gphy-xrx200 {
  78                 compatible = "lantiq,phy-xrx200";
  79                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
  80                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
  81                 phys = [ 00 01 ];
  82         };
  83
  84         gpio-keys-polled {
  85                 compatible = "gpio-keys-polled";
  86                 #address-cells = <1>;
  87                 #size-cells = <0>;
  88                 poll-interval = <100>;
  89
  90                 reset {
  91                         label = "reset";
  92                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_RESTART>;
  94                 };
  95         };
  96
  97         gpio-leds {
  98                 compatible = "gpio-leds";
  99
 100                 dsl: dsl {
 101                         label = "asl56026:green:dsl";
 102                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 103                 };
 104
 105                 /* power-* is a bicolour led */
 106                 power_green: power_green {
 107                         label = "asl56026:green:power";
 108                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 109                         default-state = "keep";
 110                 };
 111
 112                 power_red: power_red {
 113                         label = "asl56026:red:power";
 114                         gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
 115                 };
 116         };
 117
 118         gpio_export {
 119                 compatible = "gpio-export";
 120                 #size-cells = <0>;
 121
 122                 power_led_blink {
 123                         gpio-export,name = "power_led_blink";
 124                         gpio-export,output = <0>;
 125                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 126                 };
 127         };
 128 };
 129
 130 &eth0 {
 131         lan: interface@0 {
 132                 compatible = "lantiq,xrx200-pdi";
 133                 #address-cells = <1>;
 134                 #size-cells = <0>;
 135                 reg = <0>;
 136                 lantiq,switch;
 137
 138                 ethernet@2 {
 139                         compatible = "lantiq,xrx200-pdi-port";
 140                         reg = <2>;
 141                         phy-mode = "mii";
 142                         phy-handle = <&phy11>;
 143                 };
 144
 145                 ethernet@3 {
 146                         compatible = "lantiq,xrx200-pdi-port";
 147                         reg = <3>;
 148                         phy-mode = "mii";
 149                         phy-handle = <&phy14>;
 150                 };
 151
 152         };
 153
 154         mdio@0 {
 155                 #address-cells = <1>;
 156                 #size-cells = <0>;
 157                 compatible = "lantiq,xrx200-mdio";
 158
 159                 phy11: ethernet-phy@11 {
 160                         reg = <0x11>;
 161                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 162                 };
 163
 164                 phy14: ethernet-phy@14 {
 165                         reg = <0x14>;
 166                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 167                 };
 168
 169         };
 170 };