ixp4xx: Update to 4.9 kernel, refresh patches. Remove kmod-spi-gpio-old usage.
[oweals/openwrt.git] / target / linux / lantiq / dts / ARV7525PW.dts
1 /dts-v1/;
2
3 #include "danube.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8         model = "ARV7525PW - Speedport W303V Typ A";
9
10         chosen {
11                 bootargs = "console=ttyLTQ0,115200";
12         };
13
14         aliases {
15                 led-boot = &power_green;
16                 led-failsafe = &power_red;
17                 led-running = &power_green;
18
19                 led-dsl = &power_green;
20                 led-internet = &online;
21                 led-wifi = &wifi;
22         };
23
24         memory@0 {
25                 reg = <0x0 0x2000000>;
26         };
27
28         sram@1F000000 {
29                 vmmc@107000 {
30                         status = "okay";
31                         gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
32                 };
33         };
34
35         fpi@10000000 {
36                 localbus@0 {
37                         nor-boot@0 {
38                                 compatible = "lantiq,nor";
39                                 bank-width = <2>;
40                                 reg = <0 0x0 0x2000000>;
41                                 #address-cells = <1>;
42                                 #size-cells = <1>;
43
44                                 partitions {
45                                         compatible = "fixed-partitions";
46                                         #address-cells = <1>;
47                                         #size-cells = <1>;
48
49                                         partition@0 {
50                                                 label = "uboot";
51                                                 reg = <0x00000 0x10000>;
52                                                 read-only;
53                                         };
54
55                                         partition@10000 {
56                                                 label = "uboot_env";
57                                                 reg = <0x10000 0x10000>;
58                                                 read-only;
59                                         };
60
61                                         partition@20000 {
62                                                 label = "firmware";
63                                                 reg = <0x20000 0x3d0000>;
64                                         };
65
66                                         boardconfig: partition@400000 {
67                                                 label = "board_config";
68                                                 reg = <0x3f0000 0x10000>;
69                                                 read-only;
70                                         };
71                                 };
72                         };
73                 };
74
75                 gpio: pinmux@E100B10 {
76                         pinctrl-names = "default";
77                         pinctrl-0 = <&state_default>;
78
79                         state_default: pinmux {
80                                 exin {
81                                         lantiq,groups = "exin1";
82                                         lantiq,function = "exin";
83                                 };
84                                 pci {
85                                         lantiq,groups = "gnt1", "req1";
86                                         lantiq,function = "pci";
87                                 };
88                         };
89                 };
90
91                 etop@E180000 {
92                         phy-mode = "mii";
93                         mtd-mac-address = <&boardconfig 0x16>;
94                 };
95         };
96
97         gpio-keys-polled {
98                 compatible = "gpio-keys-polled";
99                 #address-cells = <1>;
100                 #size-cells = <0>;
101                 poll-interval = <100>;
102
103                 wps {
104                         label = "wps";
105                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
106                         linux,code = <KEY_WPS_BUTTON>;
107                 };
108                 reset {
109                         label = "reset";
110                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
111                         linux,code = <KEY_RESTART>;
112                 };
113         };
114
115         gpio-leds {
116                 compatible = "gpio-leds";
117                 power_green: power {
118                         label = "arv7525pw:green:power";
119                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
120                         default-state = "keep";
121                 };
122                 power_red: power1 {
123                         label = "arv7525pw:red:power";
124                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
125                 };
126                 online: online {
127                         label = "arv7525pw:green:online";
128                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
129                 };
130                 voice {
131                         label = "arv7525pw:green:telefonie";
132                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
133                 };
134                 voice2 {
135                         label = "arv7525pw:red:telefonie";
136                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
137                 };
138                 wifi: wifi {
139                         label = "arv7525pw:green:wlan";
140                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
141                 };
142         };
143 };
144
145 &pci0 {
146         status = "okay";
147         interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
148
149         wifi@0,0 {
150                 compatible = "pci0,0";
151                 reg = <0x7000 0 0 0 0>;
152                 ralink,mtd-eeprom = <&boardconfig 0x410>;
153         };
154 };