6 model = "ARV7519RW22 - Astoria Networks ARV7519RW22-A-LT";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 reg = <0x0 0x8000000>;
19 compatible = "lantiq,nor";
21 reg = <0 0x0 0x2000000>;
33 reg = <0x60000 0x20000>;
39 reg = <0x80000 0x1f00000>;
42 boardconfig: partition@1f80000 {
43 label = "boardconfig";
44 reg = <0x1f80000 0x80000>;
50 gpio: pinmux@E100B10 {
51 pinctrl-names = "default";
52 pinctrl-0 = <&state_default>;
54 state_default: pinmux {
56 lantiq,groups = "mdio";
57 lantiq,function = "mdio";
70 compatible = "lantiq,xrx200-net";
71 reg = < 0xE108000 0x3000 /* switch */
72 0xE10B100 0x70 /* mdio */
73 0xE10B1D8 0x30 /* mii */
74 0xE10B308 0x30 /* pmac */
76 interrupt-parent = <&icu0>;
80 compatible = "lantiq,xrx200-pdi";
84 mtd-mac-address = <&boardconfig 0x16>;
88 compatible = "lantiq,xrx200-pdi-port";
94 compatible = "lantiq,xrx200-pdi-port";
97 phy-handle = <&phy13>;
100 compatible = "lantiq,xrx200-pdi-port";
103 phy-handle = <&phy14>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy11>;
112 compatible = "lantiq,xrx200-pdi-port";
115 phy-handle = <&phy12>;
120 #address-cells = <1>;
122 compatible = "lantiq,xrx200-mdio";
123 phy0: ethernet-phy@0 {
125 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
127 phy11: ethernet-phy@11 {
129 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
131 phy12: ethernet-phy@12 {
133 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
135 phy13: ethernet-phy@13 {
137 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
139 phy14: ethernet-phy@14 {
141 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
148 gpios = <&gpio 32 0>;
153 gpios = <&gpio 32 0>;
158 compatible = "lantiq,pcie-xway";
163 compatible = "lantiq,pci-xway";
168 compatible = "lantiq,phy-xrx200";
169 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
170 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
175 compatible = "gpio-keys-polled";
176 #address-cells = <1>;
178 poll-interval = <100>;
182 gpios = <&gpio 20 1>;
183 linux,code = <0x211>;
187 gpios = <&gpio 22 1>;
188 linux,code = <0x198>;
192 gpios = <&gpio 45 1>;
198 compatible = "gpio-leds";
205 label = "internet_red";
206 gpios = <&gpio 10 1>;
210 gpios = <&gpio 14 1>;
211 default-state = "on";
215 gpios = <&gpio 15 1>;
218 label = "internet_orange";
219 gpios = <&gpio 19 1>;
222 label = "internet_green";
223 gpios = <&gpio 28 1>;
227 gpios = <&gpio 29 1>;