target/linux/lantiq/dts/ARV7519RW22.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ARV7519RW22 - Orange Livebox 2.1";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_green;
  17                 led-running = &power_green;
  18
  19                 led-dsl = &internet_green;
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x8000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nor-boot@0 {
  29                                 compatible = "lantiq,nor";
  30                                 bank-width = <2>;
  31                                 reg = <0 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partitions {
  36                                         compatible = "fixed-partitions";
  37                                         #address-cells = <1>;
  38                                         #size-cells = <1>;
  39
  40                                         partition@0 {
  41                                                 label = "uboot";
  42                                                 reg = <0x0 0x60000>;
  43                                                 read-only;
  44                                         };
  45
  46                                         partition@60000 {
  47                                                 label = "uboot-env";
  48                                                 reg = <0x60000 0x20000>;
  49                                                 read-only;
  50                                         };
  51
  52                                         partition@80000 {
  53                                                 label = "firmware";
  54                                                 reg = <0x80000 0x1f00000>;
  55                                         };
  56
  57                                         boardconfig: partition@1f80000 {
  58                                                 label = "boardconfig";
  59                                                 reg = <0x1f80000 0x80000>;
  60                                                 read-only;
  61                                         };
  62                                 };
  63                         };
  64                 };
  65
  66                 gpio: pinmux@E100B10 {
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&state_default>;
  69
  70                         state_default: pinmux {
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 pcie-rst {
  76                                         lantiq,pins = "io21";
  77                                         lantiq,pull = <0>;
  78                                         lantiq,output = <1>;
  79                                 };
  80                         };
  81                 };
  82
  83                 ifxhcd@E101000 {
  84                         status = "okay";
  85                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
  86                 };
  87
  88                 ifxhcd@E106000 {
  89                         status = "okay";
  90                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
  91                 };
  92
  93                 pcie@d900000 {
  94                         status = "okay";
  95                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
  96                 };
  97         };
  98
  99         gphy-xrx200 {
 100                 compatible = "lantiq,phy-xrx200";
 101                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
 102                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
 103                 phys = [ 00 01 ];
 104         };
 105
 106         gpio-keys-polled {
 107                 compatible = "gpio-keys-polled";
 108                 #address-cells = <1>;
 109                 #size-cells = <0>;
 110                 poll-interval = <100>;
 111
 112                 reset {
 113                         label = "reset";
 114                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 115                         linux,code = <KEY_RESTART>;
 116                 };
 117                 rfkill {
 118                         label = "rfkill";
 119                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 120                         linux,code = <KEY_RFKILL>;
 121                 };
 122                 wps {
 123                         label = "wps";
 124                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
 125                         linux,code = <KEY_WPS_BUTTON>;
 126                 };
 127         };
 128
 129         gpio-leds {
 130                 compatible = "gpio-leds";
 131
 132                 lan_green {
 133                         label = "arv7519rw22:green:lan";
 134                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 135                 };
 136                 internet_red {
 137                         label = "arv7519rw22:red:internet";
 138                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 139                 };
 140                 power_green: power_green {
 141                         label = "arv7519rw22:green:power";
 142                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 143                         default-state = "keep";
 144                 };
 145                 alarm_blue {
 146                         label = "arv7519rw22:blue:alarm";
 147                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 148                 };
 149                 internet_orange {
 150                         label = "arv7519rw22:orange:internet";
 151                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 152                 };
 153                 internet_green: internet_green {
 154                         label = "arv7519rw22:green:internet";
 155                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 156                 };
 157                 voice_green {
 158                         label = "arv7519rw22:green:voice";
 159                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 160                 };
 161         };
 162 };
 163
 164 &eth0 {
 165         lan: interface@0 {
 166                 compatible = "lantiq,xrx200-pdi";
 167                 #address-cells = <1>;
 168                 #size-cells = <0>;
 169                 reg = <0>;
 170                 mtd-mac-address = <&boardconfig 0x16>;
 171                 lantiq,switch;
 172
 173                 ethernet@0 {
 174                         compatible = "lantiq,xrx200-pdi-port";
 175                         reg = <0>;
 176                         phy-mode = "rgmii";
 177                         phy-handle = <&phy0>;
 178                 };
 179                 ethernet@1 {
 180                         compatible = "lantiq,xrx200-pdi-port";
 181                         reg = <4>;
 182                         phy-mode = "mii";
 183                         phy-handle = <&phy13>;
 184                 };
 185                 ethernet@2 {
 186                         compatible = "lantiq,xrx200-pdi-port";
 187                         reg = <5>;
 188                         phy-mode = "mii";
 189                         phy-handle = <&phy14>;
 190                 };
 191                 ethernet@3 {
 192                         compatible = "lantiq,xrx200-pdi-port";
 193                         reg = <2>;
 194                         phy-mode = "mii";
 195                         phy-handle = <&phy11>;
 196                 };
 197                 ethernet@4 {
 198                         compatible = "lantiq,xrx200-pdi-port";
 199                         reg = <3>;
 200                         phy-mode = "mii";
 201                         phy-handle = <&phy12>;
 202                 };
 203         };
 204
 205         mdio@0 {
 206                 #address-cells = <1>;
 207                 #size-cells = <0>;
 208                 compatible = "lantiq,xrx200-mdio";
 209                 phy0: ethernet-phy@0 {
 210                         reg = <0x0>;
 211                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 212                 };
 213                 phy11: ethernet-phy@11 {
 214                         reg = <0x11>;
 215                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 216                 };
 217                 phy12: ethernet-phy@12 {
 218                         reg = <0x12>;
 219                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 220                 };
 221                 phy13: ethernet-phy@13 {
 222                         reg = <0x13>;
 223                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 224                 };
 225                 phy14: ethernet-phy@14 {
 226                         reg = <0x14>;
 227                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 228                 };
 229         };
 230 };