6 model = "ARV7519RW22 - Astoria Networks ARV7519RW22-A-LT";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 reg = <0x0 0x8000000>;
19 compatible = "lantiq,nor";
21 reg = <0 0x0 0x2000000>;
33 reg = <0x60000 0x20000>;
39 reg = <0x80000 0x1e00000>;
44 reg = <0x1e80000 0x100000>;
47 boardconfig: partition@1f80000 {
48 label = "boardconfig";
49 reg = <0x1f80000 0x80000>;
55 gpio: pinmux@E100B10 {
56 pinctrl-names = "default";
57 pinctrl-0 = <&state_default>;
59 state_default: pinmux {
61 lantiq,groups = "mdio";
62 lantiq,function = "mdio";
75 compatible = "lantiq,xrx200-net";
76 reg = < 0xE108000 0x3000 /* switch */
77 0xE10B100 0x70 /* mdio */
78 0xE10B1D8 0x30 /* mii */
79 0xE10B308 0x30 /* pmac */
81 interrupt-parent = <&icu0>;
85 compatible = "lantiq,xrx200-pdi";
89 mtd-mac-address = <&boardconfig 0x16>;
93 compatible = "lantiq,xrx200-pdi-port";
99 compatible = "lantiq,xrx200-pdi-port";
102 phy-handle = <&phy13>;
105 compatible = "lantiq,xrx200-pdi-port";
108 phy-handle = <&phy14>;
111 compatible = "lantiq,xrx200-pdi-port";
114 phy-handle = <&phy11>;
117 compatible = "lantiq,xrx200-pdi-port";
120 phy-handle = <&phy12>;
125 #address-cells = <1>;
127 compatible = "lantiq,xrx200-mdio";
128 phy0: ethernet-phy@0 {
130 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
132 phy11: ethernet-phy@11 {
134 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
136 phy12: ethernet-phy@12 {
138 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
140 phy13: ethernet-phy@13 {
142 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
144 phy14: ethernet-phy@14 {
146 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
153 gpios = <&gpio 32 0>;
158 gpios = <&gpio 32 0>;
163 compatible = "lantiq,pcie-xway";
168 compatible = "lantiq,pci-xway";
173 compatible = "lantiq,phy-xrx200";
174 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
175 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
180 compatible = "gpio-keys-polled";
181 #address-cells = <1>;
183 poll-interval = <100>;
187 gpios = <&gpio 20 1>;
188 linux,code = <0x211>;
192 gpios = <&gpio 22 1>;
193 linux,code = <0x198>;
197 gpios = <&gpio 45 1>;
203 compatible = "gpio-leds";
210 label = "internet_red";
211 gpios = <&gpio 10 1>;
215 gpios = <&gpio 14 1>;
216 default-state = "on";
220 gpios = <&gpio 15 1>;
223 label = "internet_orange";
224 gpios = <&gpio 19 1>;
227 label = "internet_green";
228 gpios = <&gpio 28 1>;
232 gpios = <&gpio 29 1>;