target/linux/lantiq/dts/ARV7519RW22.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 / {
   6         model = "ARV7519RW22 - Orange Livebox 2.1";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_green;
  15                 led-running = &power_green;
  16
  17                 led-internet = &internet_green;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x8000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 localbus@0 {
  26                         nor-boot@0 {
  27                                 compatible = "lantiq,nor";
  28                                 bank-width = <2>;
  29                                 reg = <0 0x0 0x2000000>;
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32
  33                                 partitions {
  34                                         compatible = "fixed-partitions";
  35                                         #address-cells = <1>;
  36                                         #size-cells = <1>;
  37
  38                                         partition@0 {
  39                                                 label = "uboot";
  40                                                 reg = <0x0 0x60000>;
  41                                                 read-only;
  42                                         };
  43
  44                                         partition@60000 {
  45                                                 label = "uboot-env";
  46                                                 reg = <0x60000 0x20000>;
  47                                                 read-only;
  48                                         };
  49
  50                                         partition@80000 {
  51                                                 label = "firmware";
  52                                                 reg = <0x80000 0x1f00000>;
  53                                         };
  54
  55                                         boardconfig: partition@1f80000 {
  56                                                 label = "boardconfig";
  57                                                 reg = <0x1f80000 0x80000>;
  58                                                 read-only;
  59                                         };
  60                                 };
  61                         };
  62                 };
  63
  64                 gpio: pinmux@E100B10 {
  65                         pinctrl-names = "default";
  66                         pinctrl-0 = <&state_default>;
  67
  68                         state_default: pinmux {
  69                                 mdio {
  70                                         lantiq,groups = "mdio";
  71                                         lantiq,function = "mdio";
  72                                 };
  73                                 pcie-rst {
  74                                         lantiq,pins = "io21";
  75                                         lantiq,pull = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                         };
  79                 };
  80
  81                 ifxhcd@E101000 {
  82                         status = "okay";
  83                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86                 ifxhcd@E106000 {
  87                         status = "okay";
  88                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
  89                 };
  90
  91                 pcie@d900000 {
  92                         status = "disabled";
  93                 };
  94         };
  95
  96         gphy-xrx200 {
  97                 compatible = "lantiq,phy-xrx200";
  98                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
  99                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
 100                 phys = [ 00 01 ];
 101         };
 102
 103         gpio-keys-polled {
 104                 compatible = "gpio-keys-polled";
 105                 #address-cells = <1>;
 106                 #size-cells = <0>;
 107                 poll-interval = <100>;
 108
 109                 reset {
 110                         label = "reset";
 111                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 112                         linux,code = <KEY_RESTART>;
 113                 };
 114                 rfkill {
 115                         label = "rfkill";
 116                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 117                         linux,code = <KEY_RFKILL>;
 118                 };
 119                 wps {
 120                         label = "wps";
 121                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
 122                         linux,code = <KEY_WPS_BUTTON>;
 123                 };
 124         };
 125
 126         gpio-leds {
 127                 compatible = "gpio-leds";
 128
 129                 lan_green {
 130                         label = "arv7519rw22:green:lan";
 131                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 132                 };
 133                 internet_red {
 134                         label = "arv7519rw22:red:internet";
 135                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 136                 };
 137                 power_green: power_green {
 138                         label = "arv7519rw22:green:power";
 139                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 140                         default-state = "keep";
 141                 };
 142                 alarm_blue {
 143                         label = "arv7519rw22:blue:alarm";
 144                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 145                 };
 146                 internet_orange {
 147                         label = "arv7519rw22:orange:internet";
 148                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 149                 };
 150                 internet_green: internet_green {
 151                         label = "arv7519rw22:green:internet";
 152                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 153                 };
 154                 voice_green {
 155                         label = "arv7519rw22:green:voice";
 156                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 157                 };
 158         };
 159 };
 160
 161 &eth0 {
 162         lan: interface@0 {
 163                 compatible = "lantiq,xrx200-pdi";
 164                 #address-cells = <1>;
 165                 #size-cells = <0>;
 166                 reg = <0>;
 167                 mtd-mac-address = <&boardconfig 0x16>;
 168                 lantiq,switch;
 169
 170                 ethernet@0 {
 171                         compatible = "lantiq,xrx200-pdi-port";
 172                         reg = <0>;
 173                         phy-mode = "rgmii";
 174                         phy-handle = <&phy0>;
 175                 };
 176                 ethernet@1 {
 177                         compatible = "lantiq,xrx200-pdi-port";
 178                         reg = <4>;
 179                         phy-mode = "mii";
 180                         phy-handle = <&phy13>;
 181                 };
 182                 ethernet@2 {
 183                         compatible = "lantiq,xrx200-pdi-port";
 184                         reg = <5>;
 185                         phy-mode = "mii";
 186                         phy-handle = <&phy14>;
 187                 };
 188                 ethernet@3 {
 189                         compatible = "lantiq,xrx200-pdi-port";
 190                         reg = <2>;
 191                         phy-mode = "mii";
 192                         phy-handle = <&phy11>;
 193                 };
 194                 ethernet@4 {
 195                         compatible = "lantiq,xrx200-pdi-port";
 196                         reg = <3>;
 197                         phy-mode = "mii";
 198                         phy-handle = <&phy12>;
 199                 };
 200         };
 201
 202         mdio@0 {
 203                 #address-cells = <1>;
 204                 #size-cells = <0>;
 205                 compatible = "lantiq,xrx200-mdio";
 206                 phy0: ethernet-phy@0 {
 207                         reg = <0x0>;
 208                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 209                 };
 210                 phy11: ethernet-phy@11 {
 211                         reg = <0x11>;
 212                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 213                 };
 214                 phy12: ethernet-phy@12 {
 215                         reg = <0x12>;
 216                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 217                 };
 218                 phy13: ethernet-phy@13 {
 219                         reg = <0x13>;
 220                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 221                 };
 222                 phy14: ethernet-phy@14 {
 223                         reg = <0x14>;
 224                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 225                 };
 226         };
 227 };