target/linux/lantiq/dts/ARV7519PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7519PW - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power;
  13                         failsafe = &power2;
  14                         running = &power;
  15
  16                         dsl = &dsl;
  17                         internet = &online;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         sram@1F000000 {
  27                 vmmc@107000 {
  28                         status = "okay";
  29                 };
  30         };
  31
  32         fpi@10000000 {
  33                 localbus@0 {
  34                         nor-boot@0 {
  35                                 compatible = "lantiq,nor";
  36                                 bank-width = <2>;
  37                                 reg = <0 0x0 0x2000000>;
  38                                 #address-cells = <1>;
  39                                 #size-cells = <1>;
  40
  41                                 partitions {
  42                                         compatible = "fixed-partitions";
  43                                         #address-cells = <1>;
  44                                         #size-cells = <1>;
  45
  46                                         partition@0 {
  47                                                 label = "uboot";
  48                                                 reg = <0x00000 0x40000>;
  49                                                 read-only;
  50                                         };
  51
  52                                         partition@40000 {
  53                                                 label = "uboot_env";
  54                                                 reg = <0x40000 0x20000>;
  55                                         };
  56
  57                                         partition@60000 {
  58                                                 label = "firmware";
  59                                                 reg = <0x60000 0xf80000>;
  60                                         };
  61
  62                                         partition@fe0000 {
  63                                                 label = "board_config";
  64                                                 reg = <0xfe0000 0x20000>;
  65                                                 read-only;
  66                                         };
  67                                 };
  68                         };
  69
  70                         mac_addr {
  71                                 compatible = "lantiq,eth-mac";
  72                                 reg = <0 0xfe0016 0x6>;
  73                         };
  74                 };
  75
  76                 gpio: pinmux@E100B10 {
  77                         pinctrl-names = "default";
  78                         pinctrl-0 = <&state_default>;
  79
  80                         state_default: pinmux {
  81                                 ebu {
  82                                         lantiq,groups = "ebu cs1";
  83                                         lantiq,function = "ebu";
  84                                 };
  85                                 pci_in {
  86                                         lantiq,groups = "req1";
  87                                         lantiq,function = "pci";
  88                                         lantiq,open-drain = <1>;
  89                                         lantiq,pull = <2>;
  90                                         lantiq,output = <0>;
  91                                 };
  92                                 pci_out {
  93                                         lantiq,groups = "gnt1";
  94                                         lantiq,function = "pci";
  95                                         lantiq,pull = <0>;
  96                                         lantiq,output = <1>;
  97                                 };
  98                                 pci_rst {
  99                                         lantiq,pins = "io21";
 100                                         lantiq,pull = <2>;
 101                                         lantiq,output = <1>;
 102                                 };
 103                                 switch_rst {
 104                                         lantiq,pins = "io19";
 105                                         lantiq,pull = <2>;
 106                                         lantiq,output = <1>;
 107                                 };
 108                         };
 109                 };
 110
 111                 etop@E180000 {
 112                         phy-mode = "mii";
 113                 };
 114
 115                 /* warning: passive port
 116                 only works with active devices */
 117                 ifxhcd@E101000 {
 118                         status = "okay";
 119                 };
 120
 121                 pci@E105400 {
 122                         status = "okay";
 123                         lantiq,external-clock;
 124                         gpio-reset = <&gpio 21 0>;
 125                         req-mask = <0xf>;
 126                 };
 127         };
 128
 129         ralink_eep {
 130                 compatible = "ralink,eeprom";
 131                 ralink,eeprom = "RT2860.eeprom";
 132         };
 133
 134         gpio-keys-polled {
 135                 compatible = "gpio-keys-polled";
 136                 #address-cells = <1>;
 137                 #size-cells = <0>;
 138                 poll-interval = <100>;
 139
 140                 rfkill {
 141                         label = "rfkill";
 142                         gpios = <&gpio 11 1>;
 143                         linux,code = <0xf7>;
 144                 };
 145                 reset {
 146                         label = "reset";
 147                         gpios = <&gpio 28 1>;
 148                         linux,code = <0x198>;
 149                 };
 150         };
 151
 152         gpio-leds {
 153                 compatible = "gpio-leds";
 154                 power: power {
 155                         label = "power";
 156                         gpios = <&gpio 2 1>;
 157                         default-state = "keep";
 158                 };
 159                 power2: power2 {
 160                         label = "power2";
 161                         gpios = <&gpio 14 1>;
 162                 };
 163                 online: online {
 164                         label = "online";
 165                         gpios = <&gpio 3 1>;
 166                 };
 167                 online2 {
 168                         label = "online2";
 169                         gpios = <&gpio 30 1>;
 170                 };
 171                 wifi: wifi {
 172                         label = "wifi";
 173                         gpios = <&gpio 12 1>;
 174                 };
 175                 wifi2 {
 176                         label = "wifi2";
 177                         gpios = <&gpio 10 1>;
 178                 };
 179                 wifi3 {
 180                         label = "wifi3";
 181                         gpios = <&gpio 6 1>;
 182                 };
 183                 voice {
 184                         label = "voice";
 185                         gpios = <&gpio 31 1>;
 186                 };
 187                 wps {
 188                         label = "wps";
 189                         gpios = <&gpio 15 1>;
 190                 };
 191                 wps2 {
 192                         label = "wps2";
 193                         gpios = <&gpio 7 1>;
 194                 };
 195                 wps3 {
 196                         label = "wps3";
 197                         gpios = <&gpio 23 1>;
 198                 };
 199                 dsl: dsl {
 200                         label = "dsl";
 201                         gpios = <&gpio 4 1>;
 202                 };
 203                 lan {
 204                         label = "lan";
 205                         gpios = <&gpio 1 1>;
 206                 };
 207                 tv {
 208                         label = "tv";
 209                         gpios = <&gpio 20 1>;
 210                 };
 211                 upgrade {
 212                         label = "upgrade";
 213                         gpios = <&gpio 29 1>;
 214                 };
 215         };
 216
 217         /* is there another way to "reserve" the GPIO? */
 218         gpio_export {
 219                 compatible = "gpio-export";
 220                 #size-cells = <0>;
 221
 222                 switch {
 223                         gpio-export,name = "switch";
 224                         gpio-export,output = <1>;
 225                         gpios = <&gpio 19 0>;
 226                 };
 227         };
 228 };