target/linux/lantiq/dts/ARV7519PW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ARV7519PW - Astoria Networks";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  12         };
  13
  14         aliases {
  15                 led-boot = &power;
  16                 led-failsafe = &power2;
  17                 led-running = &power;
  18
  19                 led-dsl = &dsl;
  20                 led-internet = &online;
  21                 led-wifi = &wifi;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x4000000>;
  26         };
  27
  28         sram@1F000000 {
  29                 vmmc@107000 {
  30                         status = "okay";
  31                 };
  32         };
  33
  34         fpi@10000000 {
  35                 localbus@0 {
  36                         nor-boot@0 {
  37                                 compatible = "lantiq,nor";
  38                                 bank-width = <2>;
  39                                 reg = <0 0x0 0x2000000>;
  40                                 #address-cells = <1>;
  41                                 #size-cells = <1>;
  42
  43                                 partitions {
  44                                         compatible = "fixed-partitions";
  45                                         #address-cells = <1>;
  46                                         #size-cells = <1>;
  47
  48                                         partition@0 {
  49                                                 label = "uboot";
  50                                                 reg = <0x00000 0x40000>;
  51                                                 read-only;
  52                                         };
  53
  54                                         partition@40000 {
  55                                                 label = "uboot_env";
  56                                                 reg = <0x40000 0x20000>;
  57                                         };
  58
  59                                         partition@60000 {
  60                                                 label = "firmware";
  61                                                 reg = <0x60000 0xf80000>;
  62                                         };
  63
  64                                         boardconfig: partition@fe0000 {
  65                                                 label = "board_config";
  66                                                 reg = <0xfe0000 0x20000>;
  67                                                 read-only;
  68                                         };
  69                                 };
  70                         };
  71                 };
  72
  73                 gpio: pinmux@E100B10 {
  74                         pinctrl-names = "default";
  75                         pinctrl-0 = <&state_default>;
  76
  77                         state_default: pinmux {
  78                                 ebu {
  79                                         lantiq,groups = "ebu cs1";
  80                                         lantiq,function = "ebu";
  81                                 };
  82                                 pci_in {
  83                                         lantiq,groups = "req1";
  84                                         lantiq,function = "pci";
  85                                         lantiq,open-drain = <1>;
  86                                         lantiq,pull = <2>;
  87                                         lantiq,output = <0>;
  88                                 };
  89                                 pci_out {
  90                                         lantiq,groups = "gnt1";
  91                                         lantiq,function = "pci";
  92                                         lantiq,pull = <0>;
  93                                         lantiq,output = <1>;
  94                                 };
  95                                 pci_rst {
  96                                         lantiq,pins = "io21";
  97                                         lantiq,pull = <2>;
  98                                         lantiq,output = <1>;
  99                                 };
 100                                 switch_rst {
 101                                         lantiq,pins = "io19";
 102                                         lantiq,pull = <2>;
 103                                         lantiq,output = <1>;
 104                                 };
 105                         };
 106                 };
 107
 108                 etop@E180000 {
 109                         phy-mode = "mii";
 110                         mtd-mac-address = <&boardconfig 0x16>;
 111                 };
 112
 113                 /* warning: passive port
 114                 only works with active devices */
 115                 ifxhcd@E101000 {
 116                         status = "okay";
 117                 };
 118         };
 119
 120         gpio-keys-polled {
 121                 compatible = "gpio-keys-polled";
 122                 #address-cells = <1>;
 123                 #size-cells = <0>;
 124                 poll-interval = <100>;
 125
 126                 rfkill {
 127                         label = "rfkill";
 128                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 129                         linux,code = <KEY_RFKILL>;
 130                 };
 131                 reset {
 132                         label = "reset";
 133                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 134                         linux,code = <KEY_RESTART>;
 135                 };
 136         };
 137
 138         gpio-leds {
 139                 compatible = "gpio-leds";
 140                 power: power {
 141                         label = "power";
 142                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 143                         default-state = "keep";
 144                 };
 145                 power2: power2 {
 146                         label = "power2";
 147                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 148                 };
 149                 online: online {
 150                         label = "online";
 151                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 152                 };
 153                 online2 {
 154                         label = "online2";
 155                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
 156                 };
 157                 wifi: wifi {
 158                         label = "wifi";
 159                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 160                 };
 161                 wifi2 {
 162                         label = "wifi2";
 163                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 164                 };
 165                 wifi3 {
 166                         label = "wifi3";
 167                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 168                 };
 169                 voice {
 170                         label = "voice";
 171                         gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
 172                 };
 173                 wps {
 174                         label = "wps";
 175                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 176                 };
 177                 wps2 {
 178                         label = "wps2";
 179                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 180                 };
 181                 wps3 {
 182                         label = "wps3";
 183                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
 184                 };
 185                 dsl: dsl {
 186                         label = "dsl";
 187                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 188                 };
 189                 lan {
 190                         label = "lan";
 191                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 192                 };
 193                 tv {
 194                         label = "tv";
 195                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 196                 };
 197                 upgrade {
 198                         label = "upgrade";
 199                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 200                 };
 201         };
 202
 203         /* is there another way to "reserve" the GPIO? */
 204         gpio_export {
 205                 compatible = "gpio-export";
 206                 #size-cells = <0>;
 207
 208                 switch {
 209                         gpio-export,name = "switch";
 210                         gpio-export,output = <1>;
 211                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 212                 };
 213         };
 214 };
 215
 216 &pci0 {
 217         status = "okay";
 218         lantiq,external-clock;
 219         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 220         req-mask = <0xf>;
 221
 222         wifi@0,0 {
 223                 compatible = "pci0,0";
 224                 reg = <0x7000 0 0 0 0>;
 225                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 226                 ralink,mtd-eeprom-swap;
 227         };
 228 };