6 model = "ARV7519PW - Astoria Networks";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
14 led-failsafe = &power2;
18 led-internet = &online;
23 reg = <0x0 0x4000000>;
35 compatible = "lantiq,nor";
37 reg = <0 0x0 0x2000000>;
42 compatible = "fixed-partitions";
48 reg = <0x00000 0x40000>;
54 reg = <0x40000 0x20000>;
59 reg = <0x60000 0xf80000>;
62 boardconfig: partition@fe0000 {
63 label = "board_config";
64 reg = <0xfe0000 0x20000>;
71 gpio: pinmux@E100B10 {
72 pinctrl-names = "default";
73 pinctrl-0 = <&state_default>;
75 state_default: pinmux {
77 lantiq,groups = "ebu cs1";
78 lantiq,function = "ebu";
81 lantiq,groups = "req1";
82 lantiq,function = "pci";
83 lantiq,open-drain = <1>;
88 lantiq,groups = "gnt1";
89 lantiq,function = "pci";
108 mtd-mac-address = <&boardconfig 0x16>;
111 /* warning: passive port
112 only works with active devices */
119 compatible = "gpio-keys-polled";
120 #address-cells = <1>;
122 poll-interval = <100>;
126 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
127 linux,code = <KEY_RFKILL>;
131 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
132 linux,code = <KEY_RESTART>;
137 compatible = "gpio-leds";
140 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
141 default-state = "keep";
145 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
149 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
153 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
157 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
161 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
165 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
169 gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
173 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
177 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
181 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
185 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
189 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
193 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
197 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
201 /* is there another way to "reserve" the GPIO? */
203 compatible = "gpio-export";
207 gpio-export,name = "switch";
208 gpio-export,output = <1>;
209 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
216 lantiq,external-clock;
217 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
221 compatible = "pci0,0";
222 reg = <0x7000 0 0 0 0>;
223 ralink,mtd-eeprom = <&boardconfig 0x410>;
224 ralink,mtd-eeprom-swap;