target/linux/kirkwood/patches-5.4/102-dockstar.patch

   1 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts
   2 +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
   3 @@ -8,6 +8,13 @@
   4         model = "Seagate FreeAgent Dockstar";
   5         compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   6
   7 +       aliases {
   8 +               led-boot = &led_health;
   9 +               led-failsafe = &led_fault;
  10 +               led-running = &led_health;
  11 +               led-upgrade = &led_fault;
  12 +       };
  13 +
  14         memory {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x8000000>;
  17 @@ -42,12 +49,12 @@
  18                 pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
  19                 pinctrl-names = "default";
  20
  21 -               health {
  22 +               led_health: health {
  23                         label = "status:green:health";
  24                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  25 -                       default-state = "keep";
  26 +                       default-state = "on";
  27                 };
  28 -               fault {
  29 +               led_fault: fault {
  30                         label = "status:orange:fault";
  31                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  32                 };
  33 @@ -78,18 +85,22 @@
  34
  35         partition@0 {
  36                 label = "u-boot";
  37 -               reg = <0x0000000 0x100000>;
  38 -               read-only;
  39 +               reg = <0x0000000 0xe0000>;
  40 +       };
  41 +
  42 +       partition@e0000 {
  43 +               label = "u-boot environment";
  44 +               reg = <0xe0000 0x100000>;
  45         };
  46
  47         partition@100000 {
  48 -               label = "uImage";
  49 -               reg = <0x0100000 0x400000>;
  50 +               label = "second stage u-boot";
  51 +               reg = <0x100000 0x200000>;
  52         };
  53
  54 -       partition@500000 {
  55 -               label = "data";
  56 -               reg = <0x0500000 0xfb00000>;
  57 +       partition@200000 {
  58 +               label = "ubi";
  59 +               reg = <0x200000 0xfe00000>;
  60         };
  61  };
  62