2 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
6 +#include "kirkwood.dtsi"
7 +#include "kirkwood-6282.dtsi"
10 + model = "Cisco Systems ON100";
11 + compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
14 + device_type = "memory";
15 + reg = <0x00000000 0x20000000>;
23 + bootargs = "console=ttyS0,115200n8 earlyprintk";
24 + stdout-path = "serial0:115200n8";
28 + compatible = "gpio-keys";
29 + #address-cells = <1>;
31 + pinctrl-0 = <&pmx_btn_reset>;
32 + pinctrl-names = "default";
35 + label = "Reset Button";
36 + linux,code = <KEY_RESTART>;
37 + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
42 + compatible = "gpio-leds";
43 + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
44 + pinctrl-names = "default";
47 + label = "on100:green:health";
48 + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
52 + label = "on100:red:health";
53 + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
57 + label = "on100:green:health2";
58 + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
62 + label = "on100:red:health2";
63 + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
72 + phy-handle = <ðphy0>;
73 + phy-connection-type = "rgmii-id";
81 + phy-handle = <ðphy1>;
82 + phy-connection-type = "rgmii-id";
89 + ethphy0: ethernet-phy@0 {
90 + /* Marvell 88E1121R */
91 + compatible = "ethernet-phy-id0141.0cb0",
92 + "ethernet-phy-ieee802.3-c22";
96 + ethphy1: ethernet-phy@1 {
97 + /* Marvell 88E1121R */
98 + compatible = "ethernet-phy-id0141.0cb0",
99 + "ethernet-phy-ieee802.3-c22";
109 + reg = <0x00000000 0x000a0000>;
114 + label = "u-boot environment";
115 + reg = <0x000a0000 0x00020000>;
121 + reg = <0x000c0000 0x00540000>;
126 + reg = <0x00600000 0x1fa00000>;
131 + pmx_led_health_r: pmx-led-health-r {
132 + marvell,pins = "mpp45";
133 + marvell,function = "gpio";
136 + pmx_led_health_g: pmx-led-health-g {
137 + marvell,pins = "mpp44";
138 + marvell,function = "gpio";
141 + pmx_led_health2_r: pmx-led-health2-r {
142 + marvell,pins = "mpp47";
143 + marvell,function = "gpio";
146 + pmx_led_health2_g: pmx-led-health2-g {
147 + marvell,pins = "mpp46";
148 + marvell,function = "gpio";
151 + pmx_btn_reset: pmx-led-reset {
152 + marvell,pins = "mpp31";
153 + marvell,function = "gpio";
164 --- a/arch/arm/boot/dts/Makefile
165 +++ b/arch/arm/boot/dts/Makefile
166 @@ -242,6 +242,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
167 kirkwood-nsa310s.dtb \
168 kirkwood-nsa320.dtb \
169 kirkwood-nsa325.dtb \
170 + kirkwood-on100.dtb \
171 kirkwood-openblocks_a6.dtb \
172 kirkwood-openblocks_a7.dtb \
173 kirkwood-openrd-base.dtb \