target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch

   1 --- a/arch/arm/boot/dts/Makefile
   2 +++ b/arch/arm/boot/dts/Makefile
   3 @@ -239,6 +239,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
   4         kirkwood-nsa310.dtb \
   5         kirkwood-nsa310a.dtb \
   6         kirkwood-nsa310b.dtb \
   7 +       kirkwood-nsa310s.dtb \
   8         kirkwood-nsa320.dtb \
   9         kirkwood-nsa325.dtb \
  10         kirkwood-openblocks_a6.dtb \
  11 --- /dev/null
  12 +++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
  13 @@ -0,0 +1,254 @@
  14 +/dts-v1/;
  15 +
  16 +#include "kirkwood-nsa3x0-common.dtsi"
  17 +
  18 +/ {
  19 +       model = "ZyXEL NSA310S";
  20 +       compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
  21 +
  22 +       memory {
  23 +               device_type = "memory";
  24 +               reg = <0x00000000 0x10000000>;
  25 +       };
  26 +
  27 +       chosen {
  28 +               bootargs = "console=ttyS0,115200n8 earlyprintk";
  29 +               stdout-path = &uart0;
  30 +       };
  31 +
  32 +       ocp@f1000000 {
  33 +               pinctrl: pin-controller@10000 {
  34 +                       pinctrl-names = "default";
  35 +
  36 +                       pmx_sata0: pmx-sata0 {
  37 +                               marvell,pins;
  38 +                               marvell,function = "sata0";
  39 +                       };
  40 +
  41 +                       pmx_sata1: pmx-sata1 {
  42 +                               marvell,pins;
  43 +                               marvell,function = "sata1";
  44 +                       };
  45 +
  46 +                       pmx_usb_power: pmx-usb-power {
  47 +                               marvell,pins = "mpp21";
  48 +                               marvell,function = "gpio";
  49 +                       };
  50 +
  51 +                       pmx_pwr_off: pmx-pwr-off {
  52 +                               marvell,pins = "mpp27";
  53 +                               marvell,function = "gpio";
  54 +                       };
  55 +
  56 +                       pmx_btn_reset: pmx-btn-reset {
  57 +                               marvell,pins = "mpp24";
  58 +                               marvell,function = "gpio";
  59 +                       };
  60 +
  61 +                       pmx_btn_copy: pmx-btn-copy {
  62 +                               marvell,pins = "mpp25";
  63 +                               marvell,function = "gpio";
  64 +                       };
  65 +
  66 +                       pmx_btn_power: pmx-btn-power {
  67 +                               marvell,pins = "mpp26";
  68 +                               marvell,function = "gpio";
  69 +                       };
  70 +
  71 +                       pmx_led_hdd2_green: pmx-led-hdd2-green {
  72 +                               marvell,pins = "mpp34";
  73 +                               marvell,function = "gpio";
  74 +                       };
  75 +
  76 +                       pmx_led_hdd2_red: pmx-led-hdd2-red {
  77 +                               marvell,pins = "mpp12";
  78 +                               marvell,function = "gpio";
  79 +                       };
  80 +
  81 +                       pmx_led_usb_green: pmx-led-usb-green {
  82 +                               marvell,pins = "mpp15";
  83 +                               marvell,function = "gpio";
  84 +                       };
  85 +
  86 +                       pmx_led_copy_green: pmx-led-copy-green {
  87 +                               marvell,pins = "mpp22";
  88 +                               marvell,function = "gpio";
  89 +                       };
  90 +
  91 +                       pmx_led_copy_red: pmx-led-copy-red {
  92 +                               marvell,pins = "mpp23";
  93 +                               marvell,function = "gpio";
  94 +                       };
  95 +
  96 +                       pmx_led_sys_green: pmx-led-sys-green {
  97 +                               marvell,pins = "mpp28";
  98 +                               marvell,function = "gpio";
  99 +                       };
 100 +
 101 +                       pmx_led_sys_orange: pmx-led-sys-orange {
 102 +                               marvell,pins = "mpp29";
 103 +                               marvell,function = "gpio";
 104 +                       };
 105 +
 106 +                       pmx_led_hdd1_green: pmx-led-hdd1-green {
 107 +                               marvell,pins = "mpp16";
 108 +                               marvell,function = "gpio";
 109 +                       };
 110 +
 111 +                       pmx_led_hdd1_red: pmx-led-hdd1-red {
 112 +                               marvell,pins = "mpp13";
 113 +                               marvell,function = "gpio";
 114 +                       };
 115 +
 116 +                       pmx_pwr_sata1: pmx-pwr-sata1 {
 117 +                               marvell,pins = "mpp33";
 118 +                               marvell,function = "gpio";
 119 +                       };
 120 +
 121 +               };
 122 +
 123 +               i2c@11000 {
 124 +                       status = "okay";
 125 +
 126 +                       ht1382: rtc@68 {
 127 +                               compatible = "htk,ht1382";
 128 +                               reg = <0x68>;
 129 +                       };
 130 +               };
 131 +       };
 132 +
 133 +       regulators {
 134 +               compatible = "simple-bus";
 135 +               #address-cells = <1>;
 136 +               #size-cells = <0>;
 137 +               pinctrl-0 = <&pmx_pwr_sata1>;
 138 +               pinctrl-names = "default";
 139 +
 140 +               usb0_power: regulator@1 {
 141 +                       enable-active-high;
 142 +               };
 143 +
 144 +               sata1_power: regulator@2 {
 145 +                       compatible = "regulator-fixed";
 146 +                       reg = <2>;
 147 +                       regulator-name = "SATA1 Power";
 148 +                       regulator-min-microvolt = <5000000>;
 149 +                       regulator-max-microvolt = <5000000>;
 150 +                       regulator-always-on;
 151 +                       regulator-boot-on;
 152 +                       enable-active-high;
 153 +                       gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 154 +               };
 155 +       };
 156 +
 157 +       gpio_keys {
 158 +               power {
 159 +                       gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
 160 +               };
 161 +               copy {
 162 +                       gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 163 +               };
 164 +               reset {
 165 +                       gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 166 +               };
 167 +       };
 168 +
 169 +       gpio-leds {
 170 +               compatible = "gpio-leds";
 171 +
 172 +               green-sys {
 173 +                       label = "nsa310s:green:sys";
 174 +                       gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 175 +               };
 176 +               orange-sys {
 177 +                       label = "nsa310s:orange:sys";
 178 +                       gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 179 +               };
 180 +               green-hdd1 {
 181 +                       label = "nsa310s:green:hdd1";
 182 +                       gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 183 +               };
 184 +               red-hdd1 {
 185 +                       label = "nsa310s:red:hdd1";
 186 +                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 187 +               };
 188 +               green-hdd2 {
 189 +                       label = "nsa310s:green:hdd2";
 190 +                       gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 191 +               };
 192 +               red-hdd2 {
 193 +                       label = "nsa310s:red:hdd2";
 194 +                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 195 +               };
 196 +               green-usb {
 197 +                       label = "nsa310s:green:usb";
 198 +                       gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 199 +               };
 200 +               green-copy {
 201 +                       label = "nsa310s:green:copy";
 202 +                       gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 203 +               };
 204 +               red-copy {
 205 +                       label = "nsa310s:red:copy";
 206 +                       gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
 207 +               };
 208 +       };
 209 +
 210 +       gpio_poweroff {
 211 +               gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 212 +       };
 213 +};
 214 +
 215 +&nand {
 216 +       status = "okay";
 217 +       chip-delay = <35>;
 218 +
 219 +       partition@0 {
 220 +               label = "uboot";
 221 +               reg = <0x0000000 0xe0000>;
 222 +               read-only;
 223 +       };
 224 +
 225 +       partition@e0000 {
 226 +               label = "uboot_env";
 227 +               reg = <0xe0000 0x100000>;
 228 +       };
 229 +
 230 +       partition@100000 {
 231 +               label = "second stage u-boot";
 232 +               reg = <0x100000 0x200000>;
 233 +       };
 234 +
 235 +       partition@200000 {
 236 +               label = "ubi";
 237 +               reg = <0x200000 0x7e00000>;
 238 +       };
 239 +};
 240 +
 241 +&sata {
 242 +       status = "okay";
 243 +       nr-ports = <2>;
 244 +};
 245 +
 246 +&mdio {
 247 +       status = "okay";
 248 +       ethphy0: ethernet-phy@1 {
 249 +               compatible = "marvell,88e1318s";
 250 +               reg = <1>;
 251 +               marvell,reg-init = <0x1 0x16 0x0 0x3>,
 252 +                                                       <0x1 0x10 0x0 0x1017>,
 253 +                                                       <0x1 0x11 0x0 0x4408>,
 254 +                                                       <0x1 0x16 0x0 0x0>,
 255 +                                                       <0x1 0x4 0x0 0x1e1>,
 256 +                                                       <0x1 0x9 0x0 0x300>,
 257 +                                                       <0x1 0x10 0x0 0x3860>,
 258 +                                                       <0x1 0x0 0x0 0x9140>;
 259 +       };
 260 +};
 261 +
 262 +&eth0 {
 263 +       status = "okay";
 264 +       ethernet0-port@0 {
 265 +               phy-handle = <&ethphy0>;
 266 +       };
 267 +};