target/linux/kirkwood/patches-4.14/108-on100.patch

   1 --- /dev/null
   2 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
   3 @@ -0,0 +1,160 @@
   4 +/dts-v1/;
   5 +
   6 +#include "kirkwood.dtsi"
   7 +#include "kirkwood-6282.dtsi"
   8 +
   9 +/ {
  10 +       model = "Cisco Systems ON100";
  11 +       compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
  12 +
  13 +       memory {
  14 +               device_type = "memory";
  15 +               reg = <0x00000000 0x20000000>;
  16 +       };
  17 +
  18 +       aliases {
  19 +               serial0 = &uart0;
  20 +       };
  21 +
  22 +       chosen {
  23 +               bootargs = "console=ttyS0,115200n8 earlyprintk";
  24 +               stdout-path = "serial0:115200n8";
  25 +       };
  26 +
  27 +       gpio_keys {
  28 +               compatible = "gpio-keys";
  29 +               #address-cells = <1>;
  30 +               #size-cells = <0>;
  31 +               pinctrl-0 = <&pmx_btn_reset>;
  32 +               pinctrl-names = "default";
  33 +
  34 +               button@1 {
  35 +                       label = "Reset Button";
  36 +                       linux,code = <KEY_RESTART>;
  37 +                       gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  38 +               };
  39 +       };
  40 +
  41 +       gpio-leds {
  42 +               compatible = "gpio-leds";
  43 +               pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
  44 +               pinctrl-names = "default";
  45 +
  46 +               health-g {
  47 +                       label = "on100:green:health";
  48 +                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  49 +               };
  50 +
  51 +               health-r {
  52 +                       label = "on100:red:health";
  53 +                       gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
  54 +               };
  55 +
  56 +               health2-g {
  57 +                       label = "on100:green:health2";
  58 +                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  59 +               };
  60 +
  61 +               health2-r {
  62 +                       label = "on100:red:health2";
  63 +                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  64 +               };
  65 +       };
  66 +};
  67 +
  68 +&eth0 {
  69 +       status = "okay";
  70 +
  71 +       ethernet0-port@0 {
  72 +               phy-handle = <&ethphy0>;
  73 +               phy-connection-type = "rgmii-id";
  74 +       };
  75 +};
  76 +
  77 +&eth1 {
  78 +       status = "okay";
  79 +
  80 +       ethernet1-port@0 {
  81 +               phy-handle = <&ethphy1>;
  82 +               phy-connection-type = "rgmii-id";
  83 +       };
  84 +};
  85 +
  86 +&mdio {
  87 +       status = "okay";
  88 +
  89 +       ethphy0: ethernet-phy@0 {
  90 +               /* Marvell 88E1121R */
  91 +               compatible = "ethernet-phy-id0141.0cb0",
  92 +                            "ethernet-phy-ieee802.3-c22";
  93 +               reg = <0>;
  94 +       };
  95 +
  96 +       ethphy1: ethernet-phy@1 {
  97 +               /* Marvell 88E1121R */
  98 +               compatible = "ethernet-phy-id0141.0cb0",
  99 +                            "ethernet-phy-ieee802.3-c22";
 100 +               reg = <1>;
 101 +       };
 102 +};
 103 +
 104 +&nand {
 105 +       status = "okay";
 106 +
 107 +       partition@0 {
 108 +               label = "u-boot";
 109 +               reg = <0x00000000 0x000a0000>;
 110 +               read-only;
 111 +       };
 112 +
 113 +       partition@a0000 {
 114 +               label = "u-boot environment";
 115 +               reg = <0x000a0000 0x00020000>;
 116 +               read-only;
 117 +       };
 118 +
 119 +       partition@c0000 {
 120 +               label = "kernel";
 121 +               reg = <0x000c0000 0x00540000>;
 122 +       };
 123 +
 124 +       partition@600000 {
 125 +               label = "ubi";
 126 +               reg = <0x00600000 0x1fa00000>;
 127 +       };
 128 +};
 129 +
 130 +&pinctrl {
 131 +       pmx_led_health_r: pmx-led-health-r {
 132 +               marvell,pins = "mpp45";
 133 +               marvell,function = "gpio";
 134 +       };
 135 +
 136 +       pmx_led_health_g: pmx-led-health-g {
 137 +               marvell,pins = "mpp44";
 138 +               marvell,function = "gpio";
 139 +       };
 140 +
 141 +       pmx_led_health2_r: pmx-led-health2-r {
 142 +               marvell,pins = "mpp47";
 143 +               marvell,function = "gpio";
 144 +       };
 145 +
 146 +       pmx_led_health2_g: pmx-led-health2-g {
 147 +               marvell,pins = "mpp46";
 148 +               marvell,function = "gpio";
 149 +       };
 150 +
 151 +       pmx_btn_reset: pmx-led-reset {
 152 +               marvell,pins = "mpp31";
 153 +               marvell,function = "gpio";
 154 +       };
 155 +};
 156 +
 157 +&sdio {
 158 +       status = "okay";
 159 +};
 160 +
 161 +&uart0 {
 162 +       status = "okay";
 163 +};
 164 --- a/arch/arm/boot/dts/Makefile
 165 +++ b/arch/arm/boot/dts/Makefile
 166 @@ -271,6 +271,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 167         kirkwood-nsa310b.dtb \
 168         kirkwood-nsa320.dtb \
 169         kirkwood-nsa325.dtb \
 170 +       kirkwood-on100.dtb \
 171         kirkwood-openblocks_a6.dtb \
 172         kirkwood-openblocks_a7.dtb \
 173         kirkwood-openrd-base.dtb \