1 --- a/arch/arm/boot/dts/Makefile
2 +++ b/arch/arm/boot/dts/Makefile
3 @@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
6 kirkwood-ds411slim.dtb \
7 + kirkwood-ea3500.dtb \
9 kirkwood-goflexnet.dtb \
10 kirkwood-guruplug-server-plus.dtb \
12 +++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
15 + * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
17 + * (c) 2013 Jonas Gorski <jogo@openwrt.org>
18 + * (c) 2013 Deutsche Telekom Innovation Laboratories
19 + * (c) 2014 Luka Perkov <luka@openwrt.org>
20 + * (c) 2014 Dan Walters <dan@walters.io>
22 + * This file is licensed under the terms of the GNU General Public
23 + * License version 2. This program is licensed "as is" without any
24 + * warranty of any kind, whether express or implied.
29 +#include "kirkwood.dtsi"
30 +#include "kirkwood-6282.dtsi"
33 + model = "Linksys EA3500";
34 + compatible = "linksys,ea3500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
37 + device_type = "memory";
38 + reg = <0x00000000 0x4000000>;
42 + bootargs = "console=ttyS0,115200n8 earlyprintk";
60 + pinctrl: pin-controller@10000 {
61 + pmx_led_green_power: pmx-led-green-power {
62 + marvell,pins = "mpp7";
63 + marvell,function = "gpo";
65 + pmx_btn_wps: pmx-btn-wps {
66 + marvell,pins = "mpp47";
67 + marvell,function = "gpio";
69 + pmx_btn_reset: pmx-btn-reset {
70 + marvell,pins = "mpp48";
71 + marvell,function = "gpio";
76 + status = "disabled";
86 + compatible = "gpio-keys";
87 + #address-cells = <1>;
89 + pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
90 + pinctrl-names = "default";
93 + label = "WPS Button";
94 + linux,code = <KEY_WPS_BUTTON>;
95 + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
99 + label = "Reset Button";
100 + linux,code = <KEY_RESTART>;
101 + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
106 + compatible = "gpio-leds";
107 + pinctrl-0 = < &pmx_led_green_power >;
108 + pinctrl-names = "default";
111 + label = "ea3500:green:power";
112 + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
117 + compatible = "marvell,88e6171";
130 + pinctrl-0 = <&pmx_nand>;
131 + pinctrl-names = "default";
135 + reg = <0x0000000 0x80000>;
140 + label = "u-boot environment";
141 + reg = <0x80000 0x20000>;
146 + reg = <0x200000 0x200000>;
151 + reg = <0x400000 0x1200000>;