3 #include "kirkwood.dtsi"
4 #include "kirkwood-6282.dtsi"
7 model = "Cisco Systems ON100";
8 compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
11 device_type = "memory";
12 reg = <0x00000000 0x20000000>;
16 led-boot = &led_health_green;
17 led-failsafe = &led_health_red;
18 led-running = &led_health_green;
19 led-upgrade = &led_health_red;
24 bootargs = "console=ttyS0,115200n8 earlyprintk";
25 stdout-path = "serial0:115200n8";
29 compatible = "gpio-keys";
32 pinctrl-0 = <&pmx_btn_reset>;
33 pinctrl-names = "default";
36 label = "Reset Button";
37 linux,code = <KEY_RESTART>;
38 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
43 compatible = "gpio-leds";
44 pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
45 pinctrl-names = "default";
47 led_health_green: health_green {
48 label = "on100:green:health";
49 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
53 led_health_red: health_red {
54 label = "on100:red:health";
55 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
59 label = "on100:green:health2";
60 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
64 label = "on100:red:health2";
65 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
74 phy-handle = <ðphy0>;
75 phy-connection-type = "rgmii-id";
83 phy-handle = <ðphy1>;
84 phy-connection-type = "rgmii-id";
91 ethphy0: ethernet-phy@0 {
92 /* Marvell 88E1121R */
93 compatible = "ethernet-phy-id0141.0cb0",
94 "ethernet-phy-ieee802.3-c22";
98 ethphy1: ethernet-phy@1 {
99 /* Marvell 88E1121R */
100 compatible = "ethernet-phy-id0141.0cb0",
101 "ethernet-phy-ieee802.3-c22";
111 reg = <0x00000000 0x000a0000>;
116 label = "u-boot environment";
117 reg = <0x000a0000 0x00020000>;
123 reg = <0x000c0000 0x00540000>;
128 reg = <0x00600000 0x1fa00000>;
133 pmx_led_health_r: pmx-led-health-r {
134 marvell,pins = "mpp45";
135 marvell,function = "gpio";
138 pmx_led_health_g: pmx-led-health-g {
139 marvell,pins = "mpp44";
140 marvell,function = "gpio";
143 pmx_led_health2_r: pmx-led-health2-r {
144 marvell,pins = "mpp47";
145 marvell,function = "gpio";
148 pmx_led_health2_g: pmx-led-health2-g {
149 marvell,pins = "mpp46";
150 marvell,function = "gpio";
153 pmx_btn_reset: pmx-led-reset {
154 marvell,pins = "mpp31";
155 marvell,function = "gpio";