target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch

   1 --- a/arch/arm/configs/ixp4xx_defconfig
   2 +++ b/arch/arm/configs/ixp4xx_defconfig
   3 @@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
   4  CONFIG_MACH_DSMG600=y
   5  CONFIG_MACH_FSG=y
   6  CONFIG_MACH_GTWX5715=y
   7 +CONFIG_MACH_MI424WR=y
   8  CONFIG_IXP4XX_QMGR=y
   9  CONFIG_IXP4XX_NPE=y
  10  # CONFIG_ARM_THUMB is not set
  11 --- a/arch/arm/mach-ixp4xx/Kconfig
  12 +++ b/arch/arm/mach-ixp4xx/Kconfig
  13 @@ -258,6 +258,13 @@ config MACH_MIC256
  14           Say 'Y' here if you want your kernel to support the MIC256
  15           board from OMICRON electronics GmbH.
  16
  17 +config MACH_MI424WR
  18 +       bool "Actiontec MI424WR"
  19 +       depends on ARCH_IXP4XX
  20 +       select PCI
  21 +       help
  22 +               Add support for the Actiontec MI424-WR.
  23 +
  24  comment "IXP4xx Options"
  25
  26  config IXP4XX_INDIRECT_PCI
  27 --- a/arch/arm/mach-ixp4xx/Makefile
  28 +++ b/arch/arm/mach-ixp4xx/Makefile
  29 @@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEXWP18)     += ixd
  30  obj-pci-$(CONFIG_MACH_WRT300NV2)               += wrt300nv2-pci.o
  31  obj-pci-$(CONFIG_MACH_AP1000)          += ixdp425-pci.o
  32  obj-pci-$(CONFIG_MACH_TW5334)          += tw5334-pci.o
  33 +obj-pci-$(CONFIG_MACH_MI424WR)         += mi424wr-pci.o
  34
  35  obj-y  += common.o
  36
  37 @@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEXWP18) += compex4
  38  obj-$(CONFIG_MACH_WRT300NV2)   += wrt300nv2-setup.o
  39  obj-$(CONFIG_MACH_AP1000)      += ap1000-setup.o
  40  obj-$(CONFIG_MACH_TW5334)      += tw5334-setup.o
  41 +obj-$(CONFIG_MACH_MI424WR)     += mi424wr-setup.o
  42
  43  obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
  44  obj-$(CONFIG_IXP4XX_QMGR)      += ixp4xx_qmgr.o
  45 --- /dev/null
  46 +++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
  47 @@ -0,0 +1,70 @@
  48 +/*
  49 + * arch/arm/mach-ixp4xx/mi424wr-pci.c
  50 + *
  51 + * Actiontec MI424WR board-level PCI initialization
  52 + *
  53 + * Copyright (C) 2008 Jose Vasconcellos
  54 + *
  55 + * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
  56 + *
  57 + * This program is free software; you can redistribute it and/or modify
  58 + * it under the terms of the GNU General Public License version 2 as
  59 + * published by the Free Software Foundation.
  60 + *
  61 + */
  62 +
  63 +#include <linux/kernel.h>
  64 +#include <linux/pci.h>
  65 +#include <linux/init.h>
  66 +#include <linux/irq.h>
  67 +
  68 +#include <asm/mach-types.h>
  69 +#include <asm/mach/pci.h>
  70 +
  71 +/* PCI controller GPIO to IRQ pin mappings
  72 + * This information was obtained from Actiontec's GPL release.
  73 + *
  74 + *             INTA            INTB
  75 + * SLOT 13     8               6
  76 + * SLOT 14     7               8
  77 + * SLOT 15     6               7
  78 + */
  79 +
  80 +void __init mi424wr_pci_preinit(void)
  81 +{
  82 +       irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
  83 +       irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
  84 +       irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
  85 +
  86 +       ixp4xx_pci_preinit();
  87 +}
  88 +
  89 +static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  90 +{
  91 +       if (slot == 13)
  92 +               return IRQ_IXP4XX_GPIO8;
  93 +       if (slot == 14)
  94 +               return IRQ_IXP4XX_GPIO7;
  95 +       if (slot == 15)
  96 +               return IRQ_IXP4XX_GPIO6;
  97 +
  98 +       return -1;
  99 +}
 100 +
 101 +struct hw_pci mi424wr_pci __initdata = {
 102 +       .nr_controllers = 1,
 103 +       .preinit        = mi424wr_pci_preinit,
 104 +       .ops            = &ixp4xx_ops,
 105 +       .setup          = ixp4xx_setup,
 106 +       .map_irq        = mi424wr_map_irq,
 107 +};
 108 +
 109 +int __init mi424wr_pci_init(void)
 110 +{
 111 +       if (machine_is_mi424wr())
 112 +               pci_common_init(&mi424wr_pci);
 113 +       return 0;
 114 +}
 115 +
 116 +subsys_initcall(mi424wr_pci_init);
 117 +
 118 --- /dev/null
 119 +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
 120 @@ -0,0 +1,384 @@
 121 +/*
 122 + * arch/arm/mach-ixp4xx/mi424wr-setup.c
 123 + *
 124 + * Actiontec MI424-WR board setup
 125 + * Copyright (c) 2008 Jose Vasconcellos
 126 + *
 127 + * Based on Gemtek GTWX5715 by
 128 + * Copyright (C) 2004 George T. Joseph
 129 + * Derived from Coyote
 130 + *
 131 + * This program is free software; you can redistribute it and/or
 132 + * modify it under the terms of the GNU General Public License
 133 + * as published by the Free Software Foundation; either version 2
 134 + * of the License, or (at your option) any later version.
 135 + *
 136 + * This program is distributed in the hope that it will be useful,
 137 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
 138 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 139 + * GNU General Public License for more details.
 140 + *
 141 + * You should have received a copy of the GNU General Public License
 142 + * along with this program; if not, write to the Free Software
 143 + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 144 + *
 145 + */
 146 +
 147 +#include <linux/init.h>
 148 +#include <linux/device.h>
 149 +#include <linux/serial.h>
 150 +#include <linux/serial_8250.h>
 151 +#include <linux/types.h>
 152 +#include <linux/memory.h>
 153 +#include <linux/leds.h>
 154 +#include <linux/spi/spi.h>
 155 +#include <linux/spi/spi_gpio.h>
 156 +#include <linux/dma-mapping.h>
 157 +
 158 +#include <asm/setup.h>
 159 +#include <asm/system_info.h>
 160 +#include <asm/irq.h>
 161 +#include <asm/io.h>
 162 +#include <asm/mach-types.h>
 163 +#include <asm/mach/arch.h>
 164 +#include <asm/mach/flash.h>
 165 +
 166 +/*
 167 + * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
 168 + * and operate as an SPI type interface.  The details of the interface
 169 + * are available on Kendin/Micrel's web site.
 170 + */
 171 +
 172 +#define MI424WR_KSSPI_SELECT           9
 173 +#define MI424WR_KSSPI_TXD              4
 174 +#define MI424WR_KSSPI_CLOCK            2
 175 +#define MI424WR_KSSPI_RXD              3
 176 +
 177 +/*
 178 + * The "reset" button is wired to GPIO 10.
 179 + * The GPIO is brought "low" when the button is pushed.
 180 + */
 181 +
 182 +#define MI424WR_BUTTON_GPIO    10
 183 +#define MI424WR_BUTTON_IRQ     IRQ_IXP4XX_GPIO10
 184 +
 185 +#define MI424WR_MOCA_WAN_LED   11
 186 +
 187 +/* Latch on CS1 - taken from Actiontec's 2.4 source code
 188 + *
 189 + * default latch value
 190 + * 0  - power alarm led (red)           0 (off)
 191 + * 1  - power led (green)               0 (off)
 192 + * 2  - wireless led    (green)         1 (off)
 193 + * 3  - no internet led (red)           0 (off)
 194 + * 4  - internet ok led (green)         0 (off)
 195 + * 5  - moca LAN                        0 (off)
 196 + * 6  - WAN alarm led (red)            0 (off)
 197 + * 7  - PCI reset                       1 (not reset)
 198 + * 8  - IP phone 1 led (green)          1 (off)
 199 + * 9  - IP phone 2 led (green)          1 (off)
 200 + * 10 - VOIP ready led (green)          1 (off)
 201 + * 11 - PSTN relay 1 control            0 (PSTN)
 202 + * 12 - PSTN relay 1 control            0 (PSTN)
 203 + * 13 - N/A
 204 + * 14 - N/A
 205 + * 15 - N/A
 206 + */
 207 +
 208 +#define MI424WR_LATCH_MASK              0x04
 209 +#define MI424WR_LATCH_DEFAULT           0x1f86
 210 +
 211 +#define MI424WR_LATCH_ALARM_LED         0x00
 212 +#define MI424WR_LATCH_POWER_LED         0x01
 213 +#define MI424WR_LATCH_WIRELESS_LED      0x02
 214 +#define MI424WR_LATCH_INET_DOWN_LED     0x03
 215 +#define MI424WR_LATCH_INET_OK_LED       0x04
 216 +#define MI424WR_LATCH_MOCA_LAN_LED      0x05
 217 +#define MI424WR_LATCH_WAN_ALARM_LED     0x06
 218 +#define MI424WR_LATCH_PCI_RESET         0x07
 219 +#define MI424WR_LATCH_PHONE1_LED        0x08
 220 +#define MI424WR_LATCH_PHONE2_LED        0x09
 221 +#define MI424WR_LATCH_VOIP_LED          0x10
 222 +#define MI424WR_LATCH_PSTN_RELAY1       0x11
 223 +#define MI424WR_LATCH_PSTN_RELAY2       0x12
 224 +
 225 +/* initialize CS1 to default timings, Intel style, 16-bit bus */
 226 +#define MI424WR_CS1_CONFIG     0x80000002
 227 +
 228 +/* Define both UARTs but they are not easily accessible.
 229 + */
 230 +
 231 +static struct resource mi424wr_uart_resources[] = {
 232 +       {
 233 +               .start  = IXP4XX_UART1_BASE_PHYS,
 234 +               .end    = IXP4XX_UART1_BASE_PHYS + 0x0fff,
 235 +               .flags  = IORESOURCE_MEM,
 236 +       },
 237 +       {
 238 +               .start  = IXP4XX_UART2_BASE_PHYS,
 239 +               .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
 240 +               .flags  = IORESOURCE_MEM,
 241 +       }
 242 +};
 243 +
 244 +
 245 +static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
 246 +       {
 247 +               .mapbase        = IXP4XX_UART1_BASE_PHYS,
 248 +               .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 249 +               .irq            = IRQ_IXP4XX_UART1,
 250 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 251 +               .iotype         = UPIO_MEM,
 252 +               .regshift       = 2,
 253 +               .uartclk        = IXP4XX_UART_XTAL,
 254 +       },
 255 +       {
 256 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 257 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 258 +               .irq            = IRQ_IXP4XX_UART2,
 259 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 260 +               .iotype         = UPIO_MEM,
 261 +               .regshift       = 2,
 262 +               .uartclk        = IXP4XX_UART_XTAL,
 263 +       },
 264 +       { },
 265 +};
 266 +
 267 +static struct platform_device mi424wr_uart_device = {
 268 +       .name           = "serial8250",
 269 +       .id             = PLAT8250_DEV_PLATFORM,
 270 +       .dev.platform_data      = mi424wr_uart_platform_data,
 271 +       .num_resources  = ARRAY_SIZE(mi424wr_uart_resources),
 272 +       .resource       = mi424wr_uart_resources,
 273 +};
 274 +
 275 +static struct flash_platform_data mi424wr_flash_data = {
 276 +       .map_name       = "cfi_probe",
 277 +       .width          = 2,
 278 +};
 279 +
 280 +static struct resource mi424wr_flash_resource = {
 281 +       .flags          = IORESOURCE_MEM,
 282 +};
 283 +
 284 +static struct platform_device mi424wr_flash = {
 285 +       .name           = "IXP4XX-Flash",
 286 +       .id             = 0,
 287 +       .dev.platform_data = &mi424wr_flash_data,
 288 +       .num_resources  = 1,
 289 +       .resource       = &mi424wr_flash_resource,
 290 +};
 291 +
 292 +static struct spi_gpio_platform_data mi424wr_spi_platform_data = {
 293 +        .sck            = MI424WR_KSSPI_CLOCK,
 294 +        .mosi           = MI424WR_KSSPI_TXD,
 295 +        .miso           = MI424WR_KSSPI_RXD,
 296 +        .num_chipselect = 1,
 297 +};
 298 +
 299 +static struct platform_device mi424wr_spi_device = {
 300 +        .name   = "spi-gpio",
 301 +        .id     = 1,
 302 +        .dev.platform_data  = &mi424wr_spi_platform_data,
 303 +};
 304 +
 305 +static struct spi_board_info mi424wr_spi_devices[] __initdata = {
 306 +       {
 307 +               .modalias               = "spi-ks8995",
 308 +               .max_speed_hz           = 500000,
 309 +               .mode                   = SPI_MODE_0,
 310 +               .bus_num                = 1,
 311 +               .chip_select            = 0,
 312 +               .controller_data        = (void *)MI424WR_KSSPI_SELECT,
 313 +       }
 314 +};
 315 +
 316 +static struct gpio_led mi424wr_gpio_led[] = {
 317 +       {
 318 +               .name           = "moca-wan",   /* green led */
 319 +               .gpio           = MI424WR_MOCA_WAN_LED,
 320 +               .active_low     = 0,
 321 +       }
 322 +};
 323 +
 324 +static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
 325 +       .num_leds       = 1,
 326 +       .leds           = mi424wr_gpio_led,
 327 +};
 328 +
 329 +static struct platform_device mi424wr_gpio_leds = {
 330 +       .name           = "leds-gpio",
 331 +       .id             = -1,
 332 +       .dev.platform_data = &mi424wr_gpio_leds_data,
 333 +};
 334 +
 335 +static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
 336 +static uint16_t __iomem *iobase;
 337 +
 338 +static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
 339 +{
 340 +
 341 +       if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
 342 +               latch_value &= ~(0x1 << bit);
 343 +       else
 344 +               latch_value |= (0x1 << bit);
 345 +
 346 +       __raw_writew(latch_value, iobase);
 347 +
 348 +}
 349 +
 350 +static struct latch_led mi424wr_latch_led[] = {
 351 +       {
 352 +               .name   = "power-alarm",
 353 +               .bit    = MI424WR_LATCH_ALARM_LED,
 354 +       },
 355 +       {
 356 +               .name   = "power-ok",
 357 +               .bit    = MI424WR_LATCH_POWER_LED,
 358 +       },
 359 +       {
 360 +               .name   = "wireless",   /* green led */
 361 +               .bit    = MI424WR_LATCH_WIRELESS_LED,
 362 +       },
 363 +       {
 364 +               .name   = "inet-down",  /* red led */
 365 +               .bit    = MI424WR_LATCH_INET_DOWN_LED,
 366 +       },
 367 +       {
 368 +               .name   = "inet-up",    /* green led */
 369 +               .bit    = MI424WR_LATCH_INET_OK_LED,
 370 +       },
 371 +       {
 372 +               .name   = "moca-lan",   /* green led */
 373 +               .bit    = MI424WR_LATCH_MOCA_LAN_LED,
 374 +       },
 375 +       {
 376 +               .name   = "wan-alarm",  /* red led */
 377 +               .bit    = MI424WR_LATCH_WAN_ALARM_LED,
 378 +       }
 379 +};
 380 +
 381 +static struct latch_led_platform_data mi424wr_latch_leds_data = {
 382 +       .num_leds       = ARRAY_SIZE(mi424wr_latch_led),
 383 +       .mem            = 0x51000000,
 384 +       .leds           = mi424wr_latch_led,
 385 +       .set_led        = mi424wr_latch_set_led,
 386 +};
 387 +
 388 +static struct platform_device mi424wr_latch_leds = {
 389 +       .name           = "leds-latch",
 390 +       .id             = -1,
 391 +       .dev.platform_data = &mi424wr_latch_leds_data,
 392 +};
 393 +
 394 +static struct eth_plat_info mi424wr_wan_data = {
 395 +       .phy            = 17,   /* KS8721 */
 396 +       .rxq            = 3,
 397 +       .txreadyq       = 20,
 398 +};
 399 +
 400 +static struct eth_plat_info mi424wr_lan_data = {
 401 +       .phy            = IXP4XX_ETH_PHY_MAX_ADDR,
 402 +       .phy_mask       = 0x1e, /* ports 1-4 of the KS8995 switch */
 403 +       .rxq            = 4,
 404 +       .txreadyq       = 21,
 405 +};
 406 +
 407 +static struct platform_device mi424wr_npe_devices[] = {
 408 +       {
 409 +               .name                   = "ixp4xx_eth",
 410 +               .id                     = IXP4XX_ETH_NPEC,
 411 +               .dev.platform_data      = &mi424wr_lan_data,
 412 +               .dev.coherent_dma_mask  = DMA_BIT_MASK(32),
 413 +       }, {
 414 +               .name                   = "ixp4xx_eth",
 415 +               .id                     = IXP4XX_ETH_NPEB,
 416 +               .dev.platform_data      = &mi424wr_wan_data,
 417 +               .dev.coherent_dma_mask  = DMA_BIT_MASK(32),
 418 +       }
 419 +};
 420 +
 421 +static struct eth_plat_info mi424wr_wanD_data = {
 422 +       .phy            = 5,
 423 +       .rxq            = 4,
 424 +       .txreadyq       = 21,
 425 +};
 426 +
 427 +static struct eth_plat_info mi424wr_lanD_data = {
 428 +       .phy            = IXP4XX_ETH_PHY_MAX_ADDR,
 429 +       .phy_mask       = 0x1e, /* ports 1-4 of the KS8995 switch */
 430 +       .rxq            = 3,
 431 +       .txreadyq       = 20,
 432 +};
 433 +
 434 +static struct platform_device mi424wr_npeD_devices[] = {
 435 +       {
 436 +               .name                   = "ixp4xx_eth",
 437 +               .id                     = IXP4XX_ETH_NPEB,
 438 +               .dev.platform_data      = &mi424wr_lanD_data,
 439 +               .dev.coherent_dma_mask  = DMA_BIT_MASK(32),
 440 +       }, {
 441 +               .name                   = "ixp4xx_eth",
 442 +               .id                     = IXP4XX_ETH_NPEC,
 443 +               .dev.platform_data      = &mi424wr_wanD_data,
 444 +               .dev.coherent_dma_mask  = DMA_BIT_MASK(32),
 445 +       }
 446 +};
 447 +
 448 +static struct platform_device *mi424wr_devices[] __initdata = {
 449 +       &mi424wr_uart_device,
 450 +       &mi424wr_flash,
 451 +       &mi424wr_spi_device,
 452 +       &mi424wr_gpio_leds,
 453 +       &mi424wr_latch_leds,
 454 +};
 455 +
 456 +static void __init mi424wr_init(void)
 457 +{
 458 +       ixp4xx_sys_init();
 459 +
 460 +       mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 461 +       mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
 462 +
 463 +       *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 464 +       *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
 465 +
 466 +       /* configure button as input
 467 +        */
 468 +       gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
 469 +
 470 +       /* Initialize LEDs and enables PCI bus.
 471 +        */
 472 +       iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
 473 +       __raw_writew(latch_value, iobase);
 474 +
 475 +       spi_register_board_info(mi424wr_spi_devices, ARRAY_SIZE(mi424wr_spi_devices));
 476 +       platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
 477 +
 478 +       /* Need to figure out how to detect revD.
 479 +        * Look for a revision argument sent by redboot.
 480 +        */
 481 +#define revD 4
 482 +       if (system_rev == revD) {
 483 +               platform_device_register(&mi424wr_npeD_devices[0]);
 484 +               platform_device_register(&mi424wr_npeD_devices[1]);
 485 +       } else {
 486 +               platform_device_register(&mi424wr_npe_devices[0]);
 487 +               platform_device_register(&mi424wr_npe_devices[1]);
 488 +       }
 489 +}
 490 +
 491 +
 492 +MACHINE_START(MI424WR, "Actiontec MI424WR")
 493 +       /* Maintainer: Jose Vasconcellos */
 494 +       .map_io         = ixp4xx_map_io,
 495 +       .init_irq       = ixp4xx_init_irq,
 496 +       .init_time      = ixp4xx_timer_init,
 497 +       .atag_offset    = 0x0100,
 498 +       .init_machine   = mi424wr_init,
 499 +#if defined(CONFIG_PCI)
 500 +       .dma_zone_size  = SZ_64M,
 501 +#endif
 502 +       .restart        = ixp4xx_restart,
 503 +MACHINE_END
 504 +