target/linux/ipq806x/patches-4.9/0037-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch

   1 From ff1ecc5bfc11377e82894d05aa45a92657ef8a06 Mon Sep 17 00:00:00 2001
   2 From: Matthew McClintock <mmcclint@codeaurora.org>
   3 Date: Mon, 21 Mar 2016 15:55:21 -0500
   4 Subject: [PATCH 37/37] dts: ipq4019: Add support for IPQ4019 DK04 board
   5
   6 This is pretty similiar to a DK01 but has a bit more IO. Some notable
   7 differences are listed below however they are not in the device tree yet
   8 as we continue adding more support
   9
  10 - second serial port
  11 - PCIe
  12 - NAND
  13 - SD/EMMC
  14
  15 Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
  16 ---
  17  arch/arm/boot/dts/Makefile                      |    1 +
  18  arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi   |   12 +-
  19  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts |   21 +++
  20  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi   |  163 +++++++++++++++++++++++
  21  4 files changed, 189 insertions(+), 8 deletions(-)
  22  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
  23  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
  24
  25 --- a/arch/arm/boot/dts/Makefile
  26 +++ b/arch/arm/boot/dts/Makefile
  27 @@ -617,6 +617,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
  28         qcom-apq8084-ifc6540.dtb \
  29         qcom-apq8084-mtp.dtb \
  30         qcom-ipq4019-ap.dk01.1-c1.dtb \
  31 +       qcom-ipq4019-ap.dk04.1-c1.dtb \
  32         qcom-ipq8064-ap148.dtb \
  33         qcom-msm8660-surf.dtb \
  34         qcom-msm8960-cdp.dtb \
  35 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
  36 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
  37 @@ -109,11 +109,7 @@
  38                         status = "ok";
  39                 };
  40
  41 -                usb3_ss_phy: ssphy@0 {
  42 -                        status = "ok";
  43 -                };
  44 -
  45 -                dummy_ss_phy: ssphy@1 {
  46 +                usb3_ss_phy: ssphy@9a000 {
  47                          status = "ok";
  48                  };
  49
  50 @@ -121,15 +117,15 @@
  51                          status = "ok";
  52                  };
  53
  54 -                usb2_hs_phy: hsphy@a8000 {
  55 +                usb3@0 {
  56                          status = "ok";
  57                  };
  58
  59 -                usb3: usb3@8a00000 {
  60 +                usb2_hs_phy: hsphy@a8000 {
  61                          status = "ok";
  62                  };
  63
  64 -                usb2: usb2@6000000 {
  65 +                usb2@0{
  66                          status = "ok";
  67                  };
  68         };
  69 --- /dev/null
  70 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
  71 @@ -0,0 +1,21 @@
  72 +/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
  73 + *
  74 + * Permission to use, copy, modify, and/or distribute this software for any
  75 + * purpose with or without fee is hereby granted, provided that the above
  76 + * copyright notice and this permission notice appear in all copies.
  77 + *
  78 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  79 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  80 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  81 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  82 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  83 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  84 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  85 + *
  86 + */
  87 +
  88 +#include "qcom-ipq4019-ap.dk04.1.dtsi"
  89 +
  90 +/ {
  91 +       model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
  92 +};
  93 --- /dev/null
  94 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
  95 @@ -0,0 +1,163 @@
  96 +/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
  97 + *
  98 + * Permission to use, copy, modify, and/or distribute this software for any
  99 + * purpose with or without fee is hereby granted, provided that the above
 100 + * copyright notice and this permission notice appear in all copies.
 101 + *
 102 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 103 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 104 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 105 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 106 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 107 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 108 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 109 + *
 110 + */
 111 +
 112 +#include "qcom-ipq4019.dtsi"
 113 +
 114 +/ {
 115 +       model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
 116 +       compatible = "qcom,ipq4019";
 117 +
 118 +       clocks {
 119 +                xo: xo {
 120 +                        compatible = "fixed-clock";
 121 +                        clock-frequency = <48000000>;
 122 +                        #clock-cells = <0>;
 123 +                };
 124 +       };
 125 +
 126 +       soc {
 127 +               timer {
 128 +                       compatible = "arm,armv7-timer";
 129 +                       interrupts = <1 2 0xf08>,
 130 +                                    <1 3 0xf08>,
 131 +                                    <1 4 0xf08>,
 132 +                                    <1 1 0xf08>;
 133 +                       clock-frequency = <48000000>;
 134 +               };
 135 +
 136 +               pinctrl@0x01000000 {
 137 +                       serial_0_pins: serial_pinmux {
 138 +                               mux {
 139 +                                       pins = "gpio16", "gpio17";
 140 +                                       function = "blsp_uart0";
 141 +                                       bias-disable;
 142 +                               };
 143 +                       };
 144 +
 145 +                        serial_1_pins: serial1_pinmux {
 146 +                                mux {
 147 +                                        pins = "gpio8", "gpio9";
 148 +                                        function = "blsp_uart1";
 149 +                                        bias-disable;
 150 +                                };
 151 +                        };
 152 +
 153 +                       spi_0_pins: spi_0_pinmux {
 154 +                               pinmux {
 155 +                                       function = "blsp_spi0";
 156 +                                       pins = "gpio13", "gpio14", "gpio15";
 157 +                               };
 158 +                               pinmux_cs {
 159 +                                       function = "gpio";
 160 +                                       pins = "gpio12";
 161 +                               };
 162 +                               pinconf {
 163 +                                       pins = "gpio13", "gpio14", "gpio15";
 164 +                                       drive-strength = <12>;
 165 +                                       bias-disable;
 166 +                               };
 167 +                               pinconf_cs {
 168 +                                       pins = "gpio12";
 169 +                                       drive-strength = <2>;
 170 +                                       bias-disable;
 171 +                                       output-high;
 172 +                               };
 173 +                       };
 174 +
 175 +                       i2c_0_pins: i2c_0_pinmux {
 176 +                               pinmux {
 177 +                                       function = "blsp_i2c0";
 178 +                                       pins = "gpio10", "gpio11";
 179 +                               };
 180 +                               pinconf {
 181 +                                       pins = "gpio10", "gpio11";
 182 +                                       drive-strength = <16>;
 183 +                                       bias-disable;
 184 +                               };
 185 +                       };
 186 +               };
 187 +
 188 +               blsp_dma: dma@7884000 {
 189 +                       status = "ok";
 190 +               };
 191 +
 192 +               spi_0: spi@78b5000 {
 193 +                       pinctrl-0 = <&spi_0_pins>;
 194 +                       pinctrl-names = "default";
 195 +                       status = "ok";
 196 +                       cs-gpios = <&tlmm 12 0>;
 197 +
 198 +                       mx25l25635e@0 {
 199 +                               #address-cells = <1>;
 200 +                               #size-cells = <1>;
 201 +                               reg = <0>;
 202 +                               compatible = "mx25l25635e";
 203 +                               spi-max-frequency = <24000000>;
 204 +                       };
 205 +               };
 206 +
 207 +                i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
 208 +                        pinctrl-0 = <&i2c_0_pins>;
 209 +                        pinctrl-names = "default";
 210 +
 211 +                       status = "ok";
 212 +                };
 213 +
 214 +               serial@78af000 {
 215 +                       pinctrl-0 = <&serial_0_pins>;
 216 +                       pinctrl-names = "default";
 217 +                       status = "ok";
 218 +               };
 219 +
 220 +                serial@78b0000 {
 221 +                        pinctrl-0 = <&serial_1_pins>;
 222 +                        pinctrl-names = "default";
 223 +                        status = "ok";
 224 +                };
 225 +
 226 +                usb3_ss_phy: ssphy@9a000 {
 227 +                        status = "ok";
 228 +                };
 229 +
 230 +                usb3_hs_phy: hsphy@a6000 {
 231 +                        status = "ok";
 232 +                };
 233 +
 234 +                usb3: usb3@0 {
 235 +                        status = "ok";
 236 +                };
 237 +
 238 +                usb2_hs_phy: hsphy@a8000 {
 239 +                        status = "ok";
 240 +                };
 241 +
 242 +                usb2: usb2@6000000 {
 243 +                        status = "ok";
 244 +                };
 245 +
 246 +               cryptobam: dma@8e04000 {
 247 +                       status = "ok";
 248 +               };
 249 +
 250 +               crypto@8e3a000 {
 251 +                       status = "ok";
 252 +               };
 253 +
 254 +               watchdog@b017000 {
 255 +                       status = "ok";
 256 +               };
 257 +       };
 258 +};