target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch

   1 From ec3e465ecf3f7dd26f2e22170e4c5f4b9979df5d Mon Sep 17 00:00:00 2001
   2 From: Matthew McClintock <mmcclint@codeaurora.org>
   3 Date: Mon, 21 Mar 2016 15:55:21 -0500
   4 Subject: [PATCH 26/69] dts: ipq4019: Add support for IPQ4019 DK04 board
   5
   6 This is pretty similiar to a DK01 but has a bit more IO. Some notable
   7 differences are listed below however they are not in the device tree yet
   8 as we continue adding more support
   9
  10 - second serial port
  11 - PCIe
  12 - NAND
  13 - SD/EMMC
  14
  15 Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
  16 ---
  17  arch/arm/boot/dts/Makefile                      |   1 +
  18  arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi   |  12 +-
  19  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts |  21 +++
  20  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi   | 163 ++++++++++++++++++++++++
  21  4 files changed, 189 insertions(+), 8 deletions(-)
  22  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
  23  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
  24
  25 --- a/arch/arm/boot/dts/Makefile
  26 +++ b/arch/arm/boot/dts/Makefile
  27 @@ -617,6 +617,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
  28         qcom-apq8084-ifc6540.dtb \
  29         qcom-apq8084-mtp.dtb \
  30         qcom-ipq4019-ap.dk01.1-c1.dtb \
  31 +       qcom-ipq4019-ap.dk04.1-c1.dtb \
  32         qcom-ipq8064-ap148.dtb \
  33         qcom-msm8660-surf.dtb \
  34         qcom-msm8960-cdp.dtb \
  35 --- /dev/null
  36 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
  37 @@ -0,0 +1,21 @@
  38 +/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
  39 + *
  40 + * Permission to use, copy, modify, and/or distribute this software for any
  41 + * purpose with or without fee is hereby granted, provided that the above
  42 + * copyright notice and this permission notice appear in all copies.
  43 + *
  44 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  45 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  46 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  47 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  48 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  49 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  50 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  51 + *
  52 + */
  53 +
  54 +#include "qcom-ipq4019-ap.dk04.1.dtsi"
  55 +
  56 +/ {
  57 +       model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
  58 +};
  59 --- /dev/null
  60 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
  61 @@ -0,0 +1,163 @@
  62 +/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
  63 + *
  64 + * Permission to use, copy, modify, and/or distribute this software for any
  65 + * purpose with or without fee is hereby granted, provided that the above
  66 + * copyright notice and this permission notice appear in all copies.
  67 + *
  68 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  69 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  70 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  71 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  72 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  73 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  74 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  75 + *
  76 + */
  77 +
  78 +#include "qcom-ipq4019.dtsi"
  79 +
  80 +/ {
  81 +       model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
  82 +       compatible = "qcom,ipq4019";
  83 +
  84 +       clocks {
  85 +                xo: xo {
  86 +                        compatible = "fixed-clock";
  87 +                        clock-frequency = <48000000>;
  88 +                        #clock-cells = <0>;
  89 +                };
  90 +       };
  91 +
  92 +       soc {
  93 +               timer {
  94 +                       compatible = "arm,armv7-timer";
  95 +                       interrupts = <1 2 0xf08>,
  96 +                                    <1 3 0xf08>,
  97 +                                    <1 4 0xf08>,
  98 +                                    <1 1 0xf08>;
  99 +                       clock-frequency = <48000000>;
 100 +               };
 101 +
 102 +               pinctrl@0x01000000 {
 103 +                       serial_0_pins: serial_pinmux {
 104 +                               mux {
 105 +                                       pins = "gpio16", "gpio17";
 106 +                                       function = "blsp_uart0";
 107 +                                       bias-disable;
 108 +                               };
 109 +                       };
 110 +
 111 +                       serial_1_pins: serial1_pinmux {
 112 +                               mux {
 113 +                                       pins = "gpio8", "gpio9";
 114 +                                       function = "blsp_uart1";
 115 +                                       bias-disable;
 116 +                               };
 117 +                       };
 118 +
 119 +                       spi_0_pins: spi_0_pinmux {
 120 +                               pinmux {
 121 +                                       function = "blsp_spi0";
 122 +                                       pins = "gpio13", "gpio14", "gpio15";
 123 +                               };
 124 +                               pinmux_cs {
 125 +                                       function = "gpio";
 126 +                                       pins = "gpio12";
 127 +                               };
 128 +                               pinconf {
 129 +                                       pins = "gpio13", "gpio14", "gpio15";
 130 +                                       drive-strength = <12>;
 131 +                                       bias-disable;
 132 +                               };
 133 +                               pinconf_cs {
 134 +                                       pins = "gpio12";
 135 +                                       drive-strength = <2>;
 136 +                                       bias-disable;
 137 +                                       output-high;
 138 +                               };
 139 +                       };
 140 +
 141 +                       i2c_0_pins: i2c_0_pinmux {
 142 +                               pinmux {
 143 +                                       function = "blsp_i2c0";
 144 +                                       pins = "gpio10", "gpio11";
 145 +                               };
 146 +                               pinconf {
 147 +                                       pins = "gpio10", "gpio11";
 148 +                                       drive-strength = <16>;
 149 +                                       bias-disable;
 150 +                               };
 151 +                       };
 152 +               };
 153 +
 154 +               blsp_dma: dma@7884000 {
 155 +                       status = "ok";
 156 +               };
 157 +
 158 +               spi_0: spi@78b5000 {
 159 +                       pinctrl-0 = <&spi_0_pins>;
 160 +                       pinctrl-names = "default";
 161 +                       status = "ok";
 162 +                       cs-gpios = <&tlmm 12 0>;
 163 +
 164 +                       mx25l25635e@0 {
 165 +                               #address-cells = <1>;
 166 +                               #size-cells = <1>;
 167 +                               reg = <0>;
 168 +                               compatible = "mx25l25635e";
 169 +                               spi-max-frequency = <24000000>;
 170 +                       };
 171 +               };
 172 +
 173 +               i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
 174 +                       pinctrl-0 = <&i2c_0_pins>;
 175 +                       pinctrl-names = "default";
 176 +
 177 +                       status = "ok";
 178 +               };
 179 +
 180 +               serial@78af000 {
 181 +                       pinctrl-0 = <&serial_0_pins>;
 182 +                       pinctrl-names = "default";
 183 +                       status = "ok";
 184 +               };
 185 +
 186 +               serial@78b0000 {
 187 +                       pinctrl-0 = <&serial_1_pins>;
 188 +                       pinctrl-names = "default";
 189 +                       status = "ok";
 190 +               };
 191 +
 192 +               usb3_ss_phy: ssphy@9a000 {
 193 +                       status = "ok";
 194 +               };
 195 +
 196 +               usb3_hs_phy: hsphy@a6000 {
 197 +                       status = "ok";
 198 +               };
 199 +
 200 +               usb3: usb3@8af8800 {
 201 +                       status = "ok";
 202 +               };
 203 +
 204 +               usb2_hs_phy: hsphy@a8000 {
 205 +                       status = "ok";
 206 +               };
 207 +
 208 +               usb2: usb2@60f8800 {
 209 +                       status = "ok";
 210 +               };
 211 +
 212 +               cryptobam: dma@8e04000 {
 213 +                       status = "ok";
 214 +               };
 215 +
 216 +               crypto@8e3a000 {
 217 +                       status = "ok";
 218 +               };
 219 +
 220 +               watchdog@b017000 {
 221 +                       status = "ok";
 222 +               };
 223 +       };
 224 +};