target/linux/ipq806x/patches-3.18/802-ARM-qcom-add-TPLink-C2600-device-tree.patch

   1 --- a/arch/arm/boot/dts/Makefile
   2 +++ b/arch/arm/boot/dts/Makefile
   3 @@ -506,6 +506,7 @@
   4         qcom-apq8084-ifc6540.dtb \
   5         qcom-apq8084-mtp.dtb \
   6         qcom-ipq8064-ap148.dtb \
   7 +       qcom-ipq8064-c2600.dtb \
   8         qcom-ipq8064-db149.dtb \
   9         qcom-ipq8064-r7500.dtb \
  10         qcom-ipq8064-d7800.dtb \
  11 --- /dev/null
  12 +++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
  13 @@ -0,0 +1,412 @@
  14 +#include "qcom-ipq8064-v1.0.dtsi"
  15 +#include <dt-bindings/input/input.h>
  16 +
  17 +/ {
  18 +       model = "TP-Link Archer C2600";
  19 +       compatible = "tplink,c2600", "qcom,ipq8064";
  20 +
  21 +       memory@0 {
  22 +               reg = <0x42000000 0x1e000000>;
  23 +               device_type = "memory";
  24 +       };
  25 +
  26 +       reserved-memory {
  27 +               #address-cells = <1>;
  28 +               #size-cells = <1>;
  29 +               ranges;
  30 +               rsvd@41200000 {
  31 +                       reg = <0x41200000 0x300000>;
  32 +                       no-map;
  33 +               };
  34 +       };
  35 +
  36 +       aliases {
  37 +               serial0 = &uart4;
  38 +               mdio-gpio0 = &mdio0;
  39 +       };
  40 +
  41 +       chosen {
  42 +               linux,stdout-path = "serial0:115200n8";
  43 +       };
  44 +
  45 +       soc {
  46 +               pinmux@800000 {
  47 +                       i2c4_pins: i2c4_pinmux {
  48 +                               pins = "gpio12", "gpio13";
  49 +                               function = "gsbi4";
  50 +                               bias-disable;
  51 +                       };
  52 +
  53 +                       spi_pins: spi_pins {
  54 +                               mux {
  55 +                                       pins = "gpio18", "gpio19", "gpio21";
  56 +                                       function = "gsbi5";
  57 +                                       drive-strength = <10>;
  58 +                                       bias-none;
  59 +                               };
  60 +                       };
  61 +
  62 +                       nand_pins: nand_pins {
  63 +                               mux {
  64 +                                       pins = "gpio34", "gpio35", "gpio36",
  65 +                                              "gpio37", "gpio38", "gpio39",
  66 +                                              "gpio40", "gpio41", "gpio42",
  67 +                                              "gpio43", "gpio44", "gpio45",
  68 +                                              "gpio46", "gpio47";
  69 +                                       function = "nand";
  70 +                                       drive-strength = <10>;
  71 +                                       bias-disable;
  72 +                               };
  73 +
  74 +                               pullups {
  75 +                                       pins = "gpio39";
  76 +                                       bias-pull-up;
  77 +                               };
  78 +
  79 +                               hold {
  80 +                                       pins = "gpio40", "gpio41", "gpio42",
  81 +                                              "gpio43", "gpio44", "gpio45",
  82 +                                              "gpio46", "gpio47";
  83 +                                       bias-bus-hold;
  84 +                               };
  85 +                       };
  86 +
  87 +                       mdio0_pins: mdio0_pins {
  88 +                               mux {
  89 +                                       pins = "gpio0", "gpio1";
  90 +                                       function = "gpio";
  91 +                                       drive-strength = <8>;
  92 +                                       bias-disable;
  93 +                               };
  94 +                       };
  95 +
  96 +                       rgmii2_pins: rgmii2_pins {
  97 +                               mux {
  98 +                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
  99 +                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 100 +                                       function = "rgmii2";
 101 +                                       drive-strength = <8>;
 102 +                                       bias-disable;
 103 +                               };
 104 +                       };
 105 +               };
 106 +
 107 +               gsbi@16300000 {
 108 +                       qcom,mode = <GSBI_PROT_I2C_UART>;
 109 +                       status = "ok";
 110 +                       serial@16340000 {
 111 +                               status = "ok";
 112 +                       };
 113 +                       /*
 114 +                        * The i2c device on gsbi4 should not be enabled.
 115 +                        * On ipq806x designs gsbi4 i2c is meant for exclusive
 116 +                        * RPM usage. Turning this on in kernel manifests as
 117 +                        * i2c failure for the RPM.
 118 +                        */
 119 +               };
 120 +
 121 +               gsbi5: gsbi@1a200000 {
 122 +                       qcom,mode = <GSBI_PROT_SPI>;
 123 +                       status = "ok";
 124 +
 125 +                       spi4: spi@1a280000 {
 126 +                               status = "ok";
 127 +                               spi-max-frequency = <50000000>;
 128 +
 129 +                               pinctrl-0 = <&spi_pins>;
 130 +                               pinctrl-names = "default";
 131 +
 132 +                               cs-gpios = <&qcom_pinmux 20 0>;
 133 +
 134 +                               flash: m25p80@0 {
 135 +                                       compatible = "s25fl256s1";
 136 +                                       #address-cells = <1>;
 137 +                                       #size-cells = <1>;
 138 +                                       spi-max-frequency = <50000000>;
 139 +                                       reg = <0>;
 140 +
 141 +                                       SBL1@0 {
 142 +                                               label = "SBL1";
 143 +                                               reg = <0x0 0x20000>;
 144 +                                               read-only;
 145 +                                       };
 146 +                                       MIBIB@20000 {
 147 +                                               label = "MIBIB";
 148 +                                               reg = <0x20000 0x20000>;
 149 +                                               read-only;
 150 +                                       };
 151 +                                       SBL2@40000 {
 152 +                                               label = "SBL2";
 153 +                                               reg = <0x40000 0x20000>;
 154 +                                               read-only;
 155 +                                       };
 156 +                                       SBL3@60000 {
 157 +                                               label = "SBL3";
 158 +                                               reg = <0x60000 0x30000>;
 159 +                                               read-only;
 160 +                                       };
 161 +                                       DDRCONFIG@90000 {
 162 +                                               label = "DDRCONFIG";
 163 +                                               reg = <0x90000 0x10000>;
 164 +                                               read-only;
 165 +                                       };
 166 +                                       SSD@a0000 {
 167 +                                               label = "SSD";
 168 +                                               reg = <0xa0000 0x10000>;
 169 +                                               read-only;
 170 +                                       };
 171 +                                       TZ@b0000 {
 172 +                                               label = "TZ";
 173 +                                               reg = <0xb0000 0x30000>;
 174 +                                               read-only;
 175 +                                       };
 176 +                                       RPM@e0000 {
 177 +                                               label = "RPM";
 178 +                                               reg = <0xe0000 0x20000>;
 179 +                                               read-only;
 180 +                                       };
 181 +                                       fs-uboot@100000 {
 182 +                                               label = "fs-uboot";
 183 +                                               reg = <0x100000 0x70000>;
 184 +                                               read-only;
 185 +                                       };
 186 +                                       uboot-env@170000 {
 187 +                                               label = "uboot-env";
 188 +                                               reg = <0x170000 0x40000>;
 189 +                                               read-only;
 190 +                                       };
 191 +                                       radio@1b0000 {
 192 +                                               label = "radio";
 193 +                                               reg = <0x1b0000 0x40000>;
 194 +                                               read-only;
 195 +                                       };
 196 +                                       os-image@1f0000 {
 197 +                                               label = "os-image";
 198 +                                               reg = <0x1f0000 0x200000>;
 199 +                                       };
 200 +                                       rootfs@3f0000 {
 201 +                                               label = "rootfs";
 202 +                                               reg = <0x3f0000 0x1b00000>;
 203 +                                       };
 204 +                                       defaultmac: default-mac@1ef0000 {
 205 +                                               label = "default-mac";
 206 +                                               reg = <0x1ef0000 0x00200>;
 207 +                                               read-only;
 208 +                                       };
 209 +                                       pin@1ef0200 {
 210 +                                               label = "pin";
 211 +                                               reg = <0x1ef0200 0x00200>;
 212 +                                               read-only;
 213 +                                       };
 214 +                                       product-info@1ef0400 {
 215 +                                               label = "product-info";
 216 +                                               reg = <0x1ef0400 0x0fc00>;
 217 +                                               read-only;
 218 +                                       };
 219 +                                       partition-table@1f00000 {
 220 +                                               label = "partition-table";
 221 +                                               reg = <0x1f00000 0x10000>;
 222 +                                               read-only;
 223 +                                       };
 224 +                                       soft-version@1f10000 {
 225 +                                               label = "soft-version";
 226 +                                               reg = <0x1f10000 0x10000>;
 227 +                                               read-only;
 228 +                                       };
 229 +                                       support-list@1f20000 {
 230 +                                               label = "support-list";
 231 +                                               reg = <0x1f20000 0x10000>;
 232 +                                               read-only;
 233 +                                       };
 234 +                                       profile@1f30000 {
 235 +                                               label = "profile";
 236 +                                               reg = <0x1f30000 0x10000>;
 237 +                                               read-only;
 238 +                                       };
 239 +                                       default-config@1f40000 {
 240 +                                               label = "default-config";
 241 +                                               reg = <0x1f40000 0x10000>;
 242 +                                               read-only;
 243 +                                       };
 244 +                                       user-config@1f50000 {
 245 +                                               label = "user-config";
 246 +                                               reg = <0x1f50000 0x40000>;
 247 +                                               read-only;
 248 +                                       };
 249 +                                       qos-db@1f90000 {
 250 +                                               label = "qos-db";
 251 +                                               reg = <0x1f90000 0x40000>;
 252 +                                               read-only;
 253 +                                       };
 254 +                                       usb-config@1fd0000 {
 255 +                                               label = "usb-config";
 256 +                                               reg = <0x1fd0000 0x10000>;
 257 +                                               read-only;
 258 +                                       };
 259 +                                       log@1fe0000 {
 260 +                                               label = "log";
 261 +                                               reg = <0x1fe0000 0x20000>;
 262 +                                               read-only;
 263 +                                       };
 264 +                               };
 265 +                       };
 266 +               };
 267 +
 268 +               phy@100f8800 {          /* USB3 port 1 HS phy */
 269 +                       status = "ok";
 270 +               };
 271 +
 272 +               phy@100f8830 {          /* USB3 port 1 SS phy */
 273 +                       status = "ok";
 274 +               };
 275 +
 276 +               phy@110f8800 {          /* USB3 port 0 HS phy */
 277 +                       status = "ok";
 278 +               };
 279 +
 280 +               phy@110f8830 {          /* USB3 port 0 SS phy */
 281 +                       status = "ok";
 282 +               };
 283 +
 284 +               usb30@0 {
 285 +                       status = "ok";
 286 +               };
 287 +
 288 +               usb30@1 {
 289 +                       status = "ok";
 290 +               };
 291 +
 292 +               pcie0: pci@1b500000 {
 293 +                       status = "ok";
 294 +                       phy-tx0-term-offset = <7>;
 295 +               };
 296 +
 297 +               pcie1: pci@1b700000 {
 298 +                       status = "ok";
 299 +                       phy-tx0-term-offset = <7>;
 300 +               };
 301 +
 302 +               mdio0: mdio {
 303 +                       compatible = "virtual,mdio-gpio";
 304 +                       #address-cells = <1>;
 305 +                       #size-cells = <0>;
 306 +                       gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 307 +                       pinctrl-0 = <&mdio0_pins>;
 308 +                       pinctrl-names = "default";
 309 +
 310 +                       phy0: ethernet-phy@0 {
 311 +                               device_type = "ethernet-phy";
 312 +                               reg = <0>;
 313 +                               qca,ar8327-initvals = <
 314 +                                       0x00004 0x7600000   /* PAD0_MODE */
 315 +                                       0x00008 0x1000000   /* PAD5_MODE */
 316 +                                       0x0000c 0x80        /* PAD6_MODE */
 317 +                                       0x000e4 0xaa545     /* MAC_POWER_SEL */
 318 +                                       0x000e0 0xc74164de  /* SGMII_CTRL */
 319 +                                       0x0007c 0x4e        /* PORT0_STATUS */
 320 +                                       0x00094 0x4e        /* PORT6_STATUS */
 321 +                                       >;
 322 +                       };
 323 +
 324 +                       phy4: ethernet-phy@4 {
 325 +                               device_type = "ethernet-phy";
 326 +                               reg = <4>;
 327 +                       };
 328 +               };
 329 +
 330 +               gmac1: ethernet@37200000 {
 331 +                       status = "ok";
 332 +                       phy-mode = "rgmii";
 333 +                       qcom,id = <1>;
 334 +
 335 +                       pinctrl-0 = <&rgmii2_pins>;
 336 +                       pinctrl-names = "default";
 337 +
 338 +                       mtd-mac-address = <&defaultmac 0x8>;
 339 +                       mtd-mac-address-increment = <1>;
 340 +
 341 +                       fixed-link {
 342 +                               speed = <1000>;
 343 +                               full-duplex;
 344 +                       };
 345 +               };
 346 +
 347 +               gmac2: ethernet@37400000 {
 348 +                       status = "ok";
 349 +                       phy-mode = "sgmii";
 350 +                       qcom,id = <2>;
 351 +
 352 +                       mtd-mac-address = <&defaultmac 0x8>;
 353 +
 354 +                       fixed-link {
 355 +                               speed = <1000>;
 356 +                               full-duplex;
 357 +                       };
 358 +               };
 359 +       };
 360 +
 361 +       gpio-keys {
 362 +               compatible = "gpio-keys";
 363 +
 364 +               wifi {
 365 +                       label = "wifi";
 366 +                       gpios = <&qcom_pinmux 49 1>;
 367 +                       linux,code = <KEY_WLAN>;
 368 +               };
 369 +
 370 +               reset {
 371 +                       label = "reset";
 372 +                       gpios = <&qcom_pinmux 64 1>;
 373 +                       linux,code = <KEY_RESTART>;
 374 +               };
 375 +
 376 +               wps {
 377 +                       label = "wps";
 378 +                       gpios = <&qcom_pinmux 65 1>;
 379 +                       linux,code = <KEY_WPS_BUTTON>;
 380 +               };
 381 +                ledgeneral {
 382 +                       label = "ledgeneral";
 383 +                       gpios = <&qcom_pinmux 16 1>;
 384 +                       linux,code = <KEY_DOLLAR>;
 385 +               };
 386 +       };
 387 +
 388 +       gpio-leds {
 389 +               compatible = "gpio-leds";
 390 +
 391 +               lan {
 392 +                       label = "lan:blue";
 393 +                       gpios = <&qcom_pinmux 6 0>;
 394 +               };
 395 +                usb4 {
 396 +                       label = "usb_4:blue";
 397 +                       gpios = <&qcom_pinmux 7 0>;
 398 +               };
 399 +                usb2 {
 400 +                       label = "usb_2:blue";
 401 +                       gpios = <&qcom_pinmux 8 0>;
 402 +               };
 403 +                wps {
 404 +                       label = "wps:blue";
 405 +                       gpios = <&qcom_pinmux 9 0>;
 406 +               };
 407 +                wan_blue {
 408 +                       label = "wan:blue";
 409 +                       gpios = <&qcom_pinmux 33 1>;
 410 +               };
 411 +                status {
 412 +                       label = "status:blue";
 413 +                       gpios = <&qcom_pinmux 53 0>;
 414 +                       default-state = "on";
 415 +               };
 416 +                ledgnr {
 417 +                       label = "ledgnr:blue";
 418 +                       gpios = <&qcom_pinmux 66 0>;
 419 +               };
 420 +        };
 421 +};
 422 +
 423 +&adm_dma {
 424 +       status = "ok";
 425 +};