target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-r7800.dts

   1 #include "qcom-ipq8065.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4S R7800";
   7         compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0x1e000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22
  23                 rsvd@5fe00000 {
  24                         reg = <0x5fe00000 0x200000>;
  25                         reusable;
  26                 };
  27         };
  28
  29         aliases {
  30                 serial0 = &gsbi4_serial;
  31                 mdio-gpio0 = &mdio0;
  32
  33                 led-boot = &power_white;
  34                 led-failsafe = &power_amber;
  35                 led-running = &power_white;
  36                 led-upgrade = &power_amber;
  37         };
  38
  39         chosen {
  40                 linux,stdout-path = "serial0:115200n8";
  41         };
  42
  43         soc {
  44                 pinmux@800000 {
  45                         button_pins: button_pins {
  46                                 mux {
  47                                         pins = "gpio6", "gpio54", "gpio65";
  48                                         function = "gpio";
  49                                         drive-strength = <2>;
  50                                         bias-pull-up;
  51                                 };
  52                         };
  53
  54                         i2c4_pins: i2c4_pinmux {
  55                                 mux {
  56                                         pins = "gpio12", "gpio13";
  57                                         function = "gsbi4";
  58                                         drive-strength = <12>;
  59                                         bias-disable;
  60                                 };
  61                         };
  62
  63                         led_pins: led_pins {
  64                                 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
  65                                         "gpio24","gpio26", "gpio53", "gpio64";
  66                                 function = "gpio";
  67                                 drive-strength = <2>;
  68                                 bias-pull-down;
  69                         };
  70
  71                         nand_pins: nand_pins {
  72                                 mux {
  73                                         pins = "gpio34", "gpio35", "gpio36",
  74                                                "gpio37", "gpio38", "gpio39",
  75                                                "gpio40", "gpio41", "gpio42",
  76                                                "gpio43", "gpio44", "gpio45",
  77                                                "gpio46", "gpio47";
  78                                         function = "nand";
  79                                         drive-strength = <10>;
  80                                         bias-disable;
  81                                 };
  82                                 pullups {
  83                                         pins = "gpio39";
  84                                         bias-pull-up;
  85                                 };
  86                                 hold {
  87                                         pins = "gpio40", "gpio41", "gpio42",
  88                                                "gpio43", "gpio44", "gpio45",
  89                                                "gpio46", "gpio47";
  90                                         bias-bus-hold;
  91                                 };
  92                         };
  93
  94                         mdio0_pins: mdio0_pins {
  95                                 mux {
  96                                         pins = "gpio0", "gpio1";
  97                                         function = "gpio";
  98                                         drive-strength = <8>;
  99                                         bias-disable;
 100                                 };
 101
 102                                 clk {
 103                                         pins = "gpio1";
 104                                         input-disable;
 105                                 };
 106                         };
 107
 108                         rgmii2_pins: rgmii2_pins {
 109                                 mux {
 110                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 111                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 112                                         function = "rgmii2";
 113                                         drive-strength = <8>;
 114                                         bias-disable;
 115                                 };
 116
 117                                 tx {
 118                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
 119                                         input-disable;
 120                                 };
 121                         };
 122
 123                         spi_pins: spi_pins {
 124                                 mux {
 125                                         pins = "gpio18", "gpio19", "gpio21";
 126                                         function = "gsbi5";
 127                                         bias-pull-down;
 128                                 };
 129
 130                                 data {
 131                                         pins = "gpio18", "gpio19";
 132                                         drive-strength = <10>;
 133                                 };
 134
 135                                 cs {
 136                                         pins = "gpio20";
 137                                         drive-strength = <10>;
 138                                         bias-pull-up;
 139                                 };
 140
 141                                 clk {
 142                                         pins = "gpio21";
 143                                         drive-strength = <12>;
 144                                 };
 145                         };
 146
 147                         spi6_pins: spi6_pins {
 148                                 mux {
 149                                         pins = "gpio55", "gpio56", "gpio58";
 150                                         function = "gsbi6";
 151                                         bias-pull-down;
 152                                 };
 153
 154                                 mosi {
 155                                         pins = "gpio55";
 156                                         drive-strength = <12>;
 157                                 };
 158
 159                                 miso {
 160                                         pins = "gpio56";
 161                                         drive-strength = <14>;
 162                                 };
 163
 164                                 cs {
 165                                         pins = "gpio57";
 166                                         drive-strength = <12>;
 167                                         bias-pull-up;
 168                                 };
 169
 170                                 clk {
 171                                         pins = "gpio58";
 172                                         drive-strength = <12>;
 173                                 };
 174
 175                                 reset {
 176                                         pins = "gpio33";
 177                                         drive-strength = <10>;
 178                                         bias-pull-down;
 179                                         output-high;
 180                                 };
 181                         };
 182
 183                         usb0_pwr_en_pins: usb0_pwr_en_pins {
 184                                 mux {
 185                                         pins = "gpio15";
 186                                         function = "gpio";
 187                                         drive-strength = <12>;
 188                                         bias-pull-down;
 189                                         output-high;
 190                                 };
 191                         };
 192
 193                         usb1_pwr_en_pins: usb1_pwr_en_pins {
 194                                 mux {
 195                                         pins = "gpio16", "gpio68";
 196                                         function = "gpio";
 197                                         drive-strength = <12>;
 198                                         bias-pull-down;
 199                                         output-high;
 200                                 };
 201                         };
 202                 };
 203
 204                 gsbi@16300000 {
 205                         qcom,mode = <GSBI_PROT_I2C_UART>;
 206                         status = "ok";
 207                         serial@16340000 {
 208                                 status = "ok";
 209                         };
 210                         /*
 211                          * The i2c device on gsbi4 should not be enabled.
 212                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 213                          * RPM usage. Turning this on in kernel manifests as
 214                          * i2c failure for the RPM.
 215                          */
 216                 };
 217
 218                 sata-phy@1b400000 {
 219                         status = "ok";
 220                 };
 221
 222                 sata@29000000 {
 223                         ports-implemented = <0x1>;
 224                         status = "ok";
 225                 };
 226
 227                 phy@100f8800 {          /* USB3 port 1 HS phy */
 228                         status = "ok";
 229                 };
 230
 231                 phy@100f8830 {          /* USB3 port 1 SS phy */
 232                         status = "ok";
 233                 };
 234
 235                 phy@110f8800 {          /* USB3 port 0 HS phy */
 236                         status = "ok";
 237                 };
 238
 239                 phy@110f8830 {          /* USB3 port 0 SS phy */
 240                         status = "ok";
 241                 };
 242
 243                 usb30@0 {
 244                         status = "ok";
 245
 246                         pinctrl-0 = <&usb0_pwr_en_pins>;
 247                         pinctrl-names = "default";
 248                 };
 249
 250                 usb30@1 {
 251                         status = "ok";
 252
 253                         pinctrl-0 = <&usb1_pwr_en_pins>;
 254                         pinctrl-names = "default";
 255                 };
 256
 257                 pcie0: pci@1b500000 {
 258                         status = "ok";
 259                 };
 260
 261                 pcie1: pci@1b700000 {
 262                         status = "ok";
 263                         force_gen1 = <1>;
 264                 };
 265
 266                 nand@1ac00000 {
 267                         status = "ok";
 268
 269                         pinctrl-0 = <&nand_pins>;
 270                         pinctrl-names = "default";
 271
 272                         cs0 {
 273                                 reg = <0>;
 274                                 compatible = "qcom,nandcs";
 275
 276                                 nand-ecc-strength = <4>;
 277                                 nand-bus-width = <8>;
 278                                 nand-ecc-step-size = <512>;
 279
 280                                 partitions {
 281                                         compatible = "fixed-partitions";
 282                                         #address-cells = <1>;
 283                                         #size-cells = <1>;
 284
 285                                         qcadata@0 {
 286                                                 label = "qcadata";
 287                                                 reg = <0x0000000 0x0c80000>;
 288                                                 read-only;
 289                                         };
 290
 291                                         APPSBL@c80000 {
 292                                                 label = "APPSBL";
 293                                                 reg = <0x0c80000 0x0500000>;
 294                                                 read-only;
 295                                         };
 296
 297                                         APPSBLENV@1180000 {
 298                                                 label = "APPSBLENV";
 299                                                 reg = <0x1180000 0x0080000>;
 300                                                 read-only;
 301                                         };
 302
 303                                         art: art@1200000 {
 304                                                 label = "art";
 305                                                 reg = <0x1200000 0x0140000>;
 306                                                 read-only;
 307                                         };
 308
 309                                         artbak: art@1340000 {
 310                                                 label = "artbak";
 311                                                 reg = <0x1340000 0x0140000>;
 312                                                 read-only;
 313                                         };
 314
 315                                         kernel@1480000 {
 316                                                 label = "kernel";
 317                                                 reg = <0x1480000 0x0400000>;
 318                                         };
 319
 320                                         ubi@1880000 {
 321                                                 label = "ubi";
 322                                                 reg = <0x1880000 0x1C00000>;
 323                                         };
 324
 325                                         netgear@3480000 {
 326                                                 label = "netgear";
 327                                                 reg = <0x3480000 0x4480000>;
 328                                                 read-only;
 329                                         };
 330
 331                                         reserve@7900000 {
 332                                                 label = "reserve";
 333                                                 reg = <0x7900000 0x0700000>;
 334                                                 read-only;
 335                                         };
 336
 337                                         firmware@1480000 {
 338                                                 label = "firmware";
 339                                                 reg = <0x1480000 0x2000000>;
 340                                         };
 341                                 };
 342                         };
 343                 };
 344
 345                 mdio0: mdio {
 346                         compatible = "virtual,mdio-gpio";
 347                         #address-cells = <1>;
 348                         #size-cells = <0>;
 349                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 350                         pinctrl-0 = <&mdio0_pins>;
 351                         pinctrl-names = "default";
 352
 353
 354                         phy0: ethernet-phy@0 {
 355                                 device_type = "ethernet-phy";
 356                                 reg = <0>;
 357                                 qca,ar8327-initvals = <
 358                                         0x00004 0x7600000   /* PAD0_MODE */
 359                                         0x00008 0x1000000   /* PAD5_MODE */
 360                                         0x0000c 0x80        /* PAD6_MODE */
 361                                         0x000e4 0xaa545     /* MAC_POWER_SEL */
 362                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 363                                         0x0007c 0x4e        /* PORT0_STATUS */
 364                                         0x00094 0x4e        /* PORT6_STATUS */
 365                                         0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
 366                                         0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
 367                                         0x00978 0x19008643  /* QM_PORT1_CTRL0 */
 368                                         0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
 369                                         0x00980 0x19008643  /* QM_PORT2_CTRL0 */
 370                                         0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
 371                                         0x00988 0x19008643  /* QM_PORT3_CTRL0 */
 372                                         0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
 373                                         0x00990 0x19008643  /* QM_PORT4_CTRL0 */
 374                                         0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
 375                                         0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
 376                                         0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
 377                                         0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
 378                                         0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
 379                                         >;
 380                                 qca,ar8327-vlans = <
 381                                         0x1     0x5e        /* VLAN1 Ports 1/2/3/4/6 */
 382                                         0x2     0x21        /* VLAN2 Ports 0/5 */
 383                                 >;
 384                         };
 385
 386                         phy4: ethernet-phy@4 {
 387                                 device_type = "ethernet-phy";
 388                                 reg = <4>;
 389                                 qca,ar8327-initvals = <
 390                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 391                                         0x0000c 0x80        /* PAD6_MODE */
 392                                         >;
 393                         };
 394                 };
 395
 396                 gmac1: ethernet@37200000 {
 397                         status = "ok";
 398                         phy-mode = "rgmii";
 399                         qcom,id = <1>;
 400                         qcom,phy_mdio_addr = <4>;
 401                         qcom,poll_required = <0>;
 402                         qcom,rgmii_delay = <1>;
 403                         qcom,phy_mii_type = <0>;
 404                         qcom,emulation = <0>;
 405                         qcom,irq = <255>;
 406                         mdiobus = <&mdio0>;
 407
 408                         pinctrl-0 = <&rgmii2_pins>;
 409                         pinctrl-names = "default";
 410
 411                         mtd-mac-address = <&art 6>;
 412
 413                         fixed-link {
 414                                 speed = <1000>;
 415                                 full-duplex;
 416                         };
 417                 };
 418
 419                 gmac2: ethernet@37400000 {
 420                         status = "ok";
 421                         phy-mode = "sgmii";
 422                         qcom,id = <2>;
 423                         qcom,phy_mdio_addr = <0>;       /* none */
 424                         qcom,poll_required = <0>;       /* no polling */
 425                         qcom,rgmii_delay = <0>;
 426                         qcom,phy_mii_type = <1>;
 427                         qcom,emulation = <0>;
 428                         qcom,irq = <258>;
 429                         mdiobus = <&mdio0>;
 430
 431                         mtd-mac-address = <&art 0>;
 432
 433                         fixed-link {
 434                                 speed = <1000>;
 435                                 full-duplex;
 436                         };
 437                 };
 438         };
 439
 440         gpio-keys {
 441                 compatible = "gpio-keys";
 442                 pinctrl-0 = <&button_pins>;
 443                 pinctrl-names = "default";
 444
 445                 wifi {
 446                         label = "wifi";
 447                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 448                         linux,code = <KEY_RFKILL>;
 449                         debounce-interval = <60>;
 450                         wakeup-source;
 451                 };
 452
 453                 reset {
 454                         label = "reset";
 455                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 456                         linux,code = <KEY_RESTART>;
 457                         debounce-interval = <60>;
 458                         wakeup-source;
 459                 };
 460
 461                 wps {
 462                         label = "wps";
 463                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 464                         linux,code = <KEY_WPS_BUTTON>;
 465                         debounce-interval = <60>;
 466                         wakeup-source;
 467                 };
 468         };
 469
 470         gpio-leds {
 471                 compatible = "gpio-leds";
 472                 pinctrl-0 = <&led_pins>;
 473                 pinctrl-names = "default";
 474
 475                 power_white: power_white {
 476                         label = "r7800:white:power";
 477                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 478                         default-state = "keep";
 479                 };
 480
 481                 power_amber: power_amber {
 482                         label = "r7800:amber:power";
 483                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 484                 };
 485
 486                 wan_white {
 487                         label = "r7800:white:wan";
 488                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 489                 };
 490
 491                 wan_amber {
 492                         label = "r7800:amber:wan";
 493                         gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 494                 };
 495
 496                 usb1 {
 497                         label = "r7800:white:usb1";
 498                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 499                 };
 500
 501                 usb2 {
 502                         label = "r7800:white:usb2";
 503                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 504                 };
 505
 506                 esata {
 507                         label = "r7800:white:esata";
 508                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 509                 };
 510
 511                 wifi {
 512                         label = "r7800:white:wifi";
 513                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 514                 };
 515
 516                 wps {
 517                         label = "r7800:white:wps";
 518                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 519                 };
 520         };
 521 };
 522
 523 &adm_dma {
 524         status = "ok";
 525 };