target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019-ap.dk01.1.dtsi"
  18 #include "qcom-ipq4019-bus.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/soc/qcom,tcsr.h>
  22
  23 / {
  24         model = "AVM FRITZ!Box 4040";
  25         compatible = "avm,fritzbox-4040", "qcom,ipq4019";
  26
  27         reserved-memory {
  28                 #address-cells = <0x1>;
  29                 #size-cells = <0x1>;
  30                 ranges;
  31
  32                 rsvd1@87000000 {
  33                         reg = <0x87000000 0x500000>;
  34                         no-map;
  35                 };
  36
  37                 wifi_dump@87500000 {
  38                         reg = <0x87500000 0x600000>;
  39                         no-map;
  40                 };
  41
  42                 rsvd2@87B00000 {
  43                         reg = <0x87b00000 0x500000>;
  44                         no-map;
  45                 };
  46         };
  47 /*
  48         This also works. Maybe it could be smaller still.
  49
  50         reserved-memory {
  51                 #address-cells = <0x1>;
  52                 #size-cells = <0x1>;
  53                 ranges;
  54
  55                 rsvd1@87E00000 {
  56                         reg = <0x87e00000 0x200000>;
  57                         no-map;
  58                 };
  59         };
  60 */
  61
  62         soc {
  63                 tcsr@194b000 {
  64                         /* select hostmode */
  65                         compatible = "qcom,tcsr";
  66                         reg = <0x194b000 0x100>;
  67                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  68                         status = "ok";
  69                 };
  70
  71                 ess_tcsr@1953000 {
  72                         compatible = "qcom,tcsr";
  73                         reg = <0x1953000 0x1000>;
  74                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  75                 };
  76
  77
  78                 tcsr@1949000 {
  79                         compatible = "qcom,tcsr";
  80                         reg = <0x1949000 0x100>;
  81                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  82                 };
  83
  84                 tcsr@1957000 {
  85                         compatible = "qcom,tcsr";
  86                         reg = <0x1957000 0x100>;
  87                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  88                 };
  89
  90                 counter@4a1000 {
  91                         compatible = "qcom,qca-gcnt";
  92                         reg = <0x4a1000 0x4>;
  93                 };
  94
  95                 mdio@90000 {
  96                         status = "okay";
  97                 };
  98
  99                 qca8075: ess-switch@c000000 {
 100                         status = "okay";
 101
 102                         #gpio-cells = <2>;
 103                         gpio-controller;
 104
 105                         enable-usb-power {
 106                                 gpio-hog;
 107                                 line-name = "enable USB3 power";
 108                                 gpios = <0x7 GPIO_ACTIVE_HIGH>;
 109                                 output-high;
 110                         };
 111                 };
 112
 113                 ess-psgmii@98000 {
 114                         status = "okay";
 115                 };
 116
 117                 edma@c080000 {
 118                         status = "okay";
 119                 };
 120
 121                 wifi@a000000 {
 122                         status = "okay";
 123                 };
 124
 125                 wifi@a800000 {
 126                         status = "okay";
 127                 };
 128         };
 129
 130         gpio-keys {
 131                 compatible = "gpio-keys";
 132
 133                 wlan {
 134                         label = "wlan";
 135                         gpios = <&tlmm 0x3a GPIO_ACTIVE_LOW>;
 136                         linux,code = <KEY_RFKILL>;
 137                 };
 138
 139                 wps {
 140                         label = "wps";
 141                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_WPS_BUTTON>;
 143                 };
 144         };
 145
 146         aliases {
 147                 led-boot = &power;
 148                 led-failsafe = &flash;
 149                 led-running = &power;
 150                 led-upgrade = &flash;
 151         };
 152
 153         gpio-leds {
 154                 compatible = "gpio-leds";
 155
 156                 wlan {
 157                         label = "fritz4040:green:wlan";
 158                         gpios = <&qca8075 0x1 GPIO_ACTIVE_HIGH>;
 159                 };
 160
 161                 panic: info_red {
 162                         label = "fritz4040:red:info";
 163                         gpios = <&qca8075 0x3 GPIO_ACTIVE_HIGH>;
 164                         panic-indicator;
 165                 };
 166
 167                 wan {
 168                         label = "fritz4040:green:wan";
 169                         gpios = <&qca8075 0x5 GPIO_ACTIVE_HIGH>;
 170                 };
 171
 172                 power: power {
 173                         label = "fritz4040:green:power";
 174                         gpios = <&qca8075 0xb GPIO_ACTIVE_HIGH>;
 175                 };
 176
 177                 lan {
 178                         label = "fritz4040:green:lan";
 179                         gpios = <&qca8075 0xd GPIO_ACTIVE_HIGH>;
 180                 };
 181
 182                 flash: info_amber {
 183                         label = "fritz4040:amber:info";
 184                         gpios = <&qca8075 0xf GPIO_ACTIVE_HIGH>;
 185                 };
 186         };
 187 };
 188
 189 &spi_0 { /* BLSP1 QUP1 */
 190         status = "ok";
 191
 192         mx25l25635e@0 {
 193                 status = "disabled";
 194         };
 195
 196         mx25l25635f@0 {
 197                 compatible = "mx25l25635f", "jedec,spi-nor";
 198                 #address-cells = <1>;
 199                 #size-cells = <0>;
 200                 reg = <0>;
 201                 spi-max-frequency = <24000000>;
 202                 status = "ok";
 203                 m25p,fast-read;
 204
 205                 partitions {
 206                         compatible = "fixed-partitions";
 207                         #address-cells = <1>;
 208                         #size-cells = <1>;
 209
 210                         partition0@0 {
 211                                 label = "SBL1";
 212                                 reg = <0x00000000 0x00040000>;
 213                                 read-only;
 214                         };
 215                         partition1@40000 {
 216                                 label = "MIBIB";
 217                                 reg = <0x00040000 0x00020000>;
 218                                 read-only;
 219                         };
 220                         partition2@60000 {
 221                                 label = "QSEE";
 222                                 reg = <0x00060000 0x00060000>;
 223                                 read-only;
 224                         };
 225                         partition3@c0000 {
 226                                 label = "CDT";
 227                                 reg = <0x000c0000 0x00010000>;
 228                                 read-only;
 229                         };
 230                         partition4@d0000 {
 231                                 label = "DDRPARAMS";
 232                                 reg = <0x000d0000 0x00010000>;
 233                                 read-only;
 234                         };
 235                         partition5@e0000 {
 236                                 label = "APPSBLENV"; /* uboot env - empty */
 237                                 reg = <0x000e0000 0x00010000>;
 238                                 read-only;
 239                         };
 240                         partition6@f0000 {
 241                                 label = "urlader"; /* APPSBL */
 242                                 reg = <0x000f0000 0x0002dc000>;
 243                                 read-only;
 244                         };
 245                         partition7@11dc00 {
 246                                 /* make a backup of this partition! */
 247                                 label = "urlader_config";
 248                                 reg = <0x0011dc00 0x00002400>;
 249                                 read-only;
 250                         };
 251                         partition8@120000 {
 252                                 label = "tffs1";
 253                                 reg = <0x00120000 0x00080000>;
 254                                 read-only;
 255                         };
 256                         partition9@1a0000 {
 257                                 label = "tffs2";
 258                                 reg = <0x001a0000 0x00080000>;
 259                                 read-only;
 260                         };
 261                         partition10@220000 {
 262                                 label = "uboot";
 263                                 reg = <0x00220000 0x00080000>;
 264                                 read-only;
 265                         };
 266                         partition11@2A0000 {
 267                                 label = "firmware";
 268                                 reg = <0x002A0000 0x01C60000>;
 269                         };
 270                         partition12@1f00000 {
 271                                 label = "jffs2";
 272                                 reg = <0x01F00000 0x00100000>;
 273                         };
 274                 };
 275         };
 276 };
 277
 278 &cpu0_opp_table {
 279         /delete-node/ opp@666000000;
 280
 281         opp@710000000 {
 282                 opp-hz = /bits/ 64 <710000000>;
 283                 clock-latency-ns = <256000>;
 284         };
 285 };