1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
3 * Permission to use, copy, modify, and/or distribute this software for any
4 * purpose with or without fee is hereby granted, provided that the above
5 * copyright notice and this permission notice appear in all copies.
7 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
8 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
9 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
10 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
11 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
12 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
13 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include "qcom-ipq4019-ap.dk01.1.dtsi"
18 #include "qcom-ipq4019-bus.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
23 model = "AVM FRITZ!Box 4040";
24 compatible = "avm,fritzbox-4040", "qcom,ipq4019";
27 #address-cells = <0x1>;
32 reg = <0x87000000 0x500000>;
37 reg = <0x87500000 0x600000>;
42 reg = <0x87b00000 0x500000>;
47 This also works. Maybe it could be smaller still.
50 #address-cells = <0x1>;
55 reg = <0x87e00000 0x200000>;
62 qca8075: ess-switch@c000000 {
70 line-name = "enable USB3 power";
71 gpios = <0x7 GPIO_ACTIVE_HIGH>;
78 compatible = "gpio-keys";
82 gpios = <&tlmm 0x3a GPIO_ACTIVE_LOW>;
83 linux,code = <KEY_RFKILL>;
88 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_WPS_BUTTON>;
95 led-failsafe = &flash;
101 compatible = "gpio-leds";
104 label = "fritz4040:green:wlan";
105 gpios = <&qca8075 0x1 GPIO_ACTIVE_HIGH>;
109 label = "fritz4040:red:info";
110 gpios = <&qca8075 0x3 GPIO_ACTIVE_HIGH>;
115 label = "fritz4040:green:wan";
116 gpios = <&qca8075 0x5 GPIO_ACTIVE_HIGH>;
120 label = "fritz4040:green:power";
121 gpios = <&qca8075 0xb GPIO_ACTIVE_HIGH>;
125 label = "fritz4040:green:lan";
126 gpios = <&qca8075 0xd GPIO_ACTIVE_HIGH>;
130 label = "fritz4040:amber:info";
131 gpios = <&qca8075 0xf GPIO_ACTIVE_HIGH>;
136 &spi_0 { /* BLSP1 QUP1 */
138 compatible = "mx25l25635f", "jedec,spi-nor";
139 #address-cells = <1>;
142 spi-max-frequency = <24000000>;
147 compatible = "fixed-partitions";
148 #address-cells = <1>;
153 reg = <0x00000000 0x00040000>;
158 reg = <0x00040000 0x00020000>;
163 reg = <0x00060000 0x00060000>;
168 reg = <0x000c0000 0x00010000>;
173 reg = <0x000d0000 0x00010000>;
177 label = "APPSBLENV"; /* uboot env - empty */
178 reg = <0x000e0000 0x00010000>;
182 label = "urlader"; /* APPSBL */
183 reg = <0x000f0000 0x0002dc000>;
187 /* make a backup of this partition! */
188 label = "urlader_config";
189 reg = <0x0011dc00 0x00002400>;
194 reg = <0x00120000 0x00080000>;
199 reg = <0x001a0000 0x00080000>;
204 reg = <0x00220000 0x00080000>;
209 reg = <0x002A0000 0x01C60000>;
211 partition12@1f00000 {
213 reg = <0x01F00000 0x00100000>;