target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019-ap.dk01.1.dtsi"
  18 #include "qcom-ipq4019-bus.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21
  22 / {
  23         model = "AVM FRITZ!Box 4040";
  24         compatible = "avm,fritzbox-4040", "qcom,ipq4019";
  25
  26         reserved-memory {
  27                 #address-cells = <0x1>;
  28                 #size-cells = <0x1>;
  29                 ranges;
  30
  31                 rsvd1@87000000 {
  32                         reg = <0x87000000 0x500000>;
  33                         no-map;
  34                 };
  35
  36                 wifi_dump@87500000 {
  37                         reg = <0x87500000 0x600000>;
  38                         no-map;
  39                 };
  40
  41                 rsvd2@87B00000 {
  42                         reg = <0x87b00000 0x500000>;
  43                         no-map;
  44                 };
  45         };
  46 /*
  47         This also works. Maybe it could be smaller still.
  48
  49         reserved-memory {
  50                 #address-cells = <0x1>;
  51                 #size-cells = <0x1>;
  52                 ranges;
  53
  54                 rsvd1@87E00000 {
  55                         reg = <0x87e00000 0x200000>;
  56                         no-map;
  57                 };
  58         };
  59 */
  60
  61         soc {
  62                 qca8075: ess-switch@c000000 {
  63                         status = "okay";
  64
  65                         #gpio-cells = <2>;
  66                         gpio-controller;
  67
  68                         enable-usb-power {
  69                                 gpio-hog;
  70                                 line-name = "enable USB3 power";
  71                                 gpios = <0x7 GPIO_ACTIVE_HIGH>;
  72                                 output-high;
  73                         };
  74                 };
  75         };
  76
  77         gpio-keys {
  78                 compatible = "gpio-keys";
  79
  80                 wlan {
  81                         label = "wlan";
  82                         gpios = <&tlmm 0x3a GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_RFKILL>;
  84                 };
  85
  86                 wps {
  87                         label = "wps";
  88                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_WPS_BUTTON>;
  90                 };
  91         };
  92
  93         aliases {
  94                 led-boot = &power;
  95                 led-failsafe = &flash;
  96                 led-running = &power;
  97                 led-upgrade = &flash;
  98         };
  99
 100         gpio-leds {
 101                 compatible = "gpio-leds";
 102
 103                 wlan {
 104                         label = "fritz4040:green:wlan";
 105                         gpios = <&qca8075 0x1 GPIO_ACTIVE_HIGH>;
 106                 };
 107
 108                 panic: info_red {
 109                         label = "fritz4040:red:info";
 110                         gpios = <&qca8075 0x3 GPIO_ACTIVE_HIGH>;
 111                         panic-indicator;
 112                 };
 113
 114                 wan {
 115                         label = "fritz4040:green:wan";
 116                         gpios = <&qca8075 0x5 GPIO_ACTIVE_HIGH>;
 117                 };
 118
 119                 power: power {
 120                         label = "fritz4040:green:power";
 121                         gpios = <&qca8075 0xb GPIO_ACTIVE_HIGH>;
 122                 };
 123
 124                 lan {
 125                         label = "fritz4040:green:lan";
 126                         gpios = <&qca8075 0xd GPIO_ACTIVE_HIGH>;
 127                 };
 128
 129                 flash: info_amber {
 130                         label = "fritz4040:amber:info";
 131                         gpios = <&qca8075 0xf GPIO_ACTIVE_HIGH>;
 132                 };
 133         };
 134 };
 135
 136 &spi_0 { /* BLSP1 QUP1 */
 137         mx25l25635f@0 {
 138                 compatible = "mx25l25635f", "jedec,spi-nor";
 139                 #address-cells = <1>;
 140                 #size-cells = <0>;
 141                 reg = <0>;
 142                 spi-max-frequency = <24000000>;
 143                 status = "ok";
 144                 m25p,fast-read;
 145
 146                 partitions {
 147                         compatible = "fixed-partitions";
 148                         #address-cells = <1>;
 149                         #size-cells = <1>;
 150
 151                         partition0@0 {
 152                                 label = "SBL1";
 153                                 reg = <0x00000000 0x00040000>;
 154                                 read-only;
 155                         };
 156                         partition1@40000 {
 157                                 label = "MIBIB";
 158                                 reg = <0x00040000 0x00020000>;
 159                                 read-only;
 160                         };
 161                         partition2@60000 {
 162                                 label = "QSEE";
 163                                 reg = <0x00060000 0x00060000>;
 164                                 read-only;
 165                         };
 166                         partition3@c0000 {
 167                                 label = "CDT";
 168                                 reg = <0x000c0000 0x00010000>;
 169                                 read-only;
 170                         };
 171                         partition4@d0000 {
 172                                 label = "DDRPARAMS";
 173                                 reg = <0x000d0000 0x00010000>;
 174                                 read-only;
 175                         };
 176                         partition5@e0000 {
 177                                 label = "APPSBLENV"; /* uboot env - empty */
 178                                 reg = <0x000e0000 0x00010000>;
 179                                 read-only;
 180                         };
 181                         partition6@f0000 {
 182                                 label = "urlader"; /* APPSBL */
 183                                 reg = <0x000f0000 0x0002dc000>;
 184                                 read-only;
 185                         };
 186                         partition7@11dc00 {
 187                                 /* make a backup of this partition! */
 188                                 label = "urlader_config";
 189                                 reg = <0x0011dc00 0x00002400>;
 190                                 read-only;
 191                         };
 192                         partition8@120000 {
 193                                 label = "tffs1";
 194                                 reg = <0x00120000 0x00080000>;
 195                                 read-only;
 196                         };
 197                         partition9@1a0000 {
 198                                 label = "tffs2";
 199                                 reg = <0x001a0000 0x00080000>;
 200                                 read-only;
 201                         };
 202                         partition10@220000 {
 203                                 label = "uboot";
 204                                 reg = <0x00220000 0x00080000>;
 205                                 read-only;
 206                         };
 207                         partition11@2A0000 {
 208                                 label = "firmware";
 209                                 reg = <0x002A0000 0x01C60000>;
 210                         };
 211                         partition12@1f00000 {
 212                                 label = "jffs2";
 213                                 reg = <0x01F00000 0x00100000>;
 214                         };
 215                 };
 216         };
 217 };
 218
 219 &cpu0_opp_table {
 220         /delete-node/ opp@666000000;
 221
 222         opp@710000000 {
 223                 opp-hz = /bits/ 64 <710000000>;
 224                 clock-latency-ns = <256000>;
 225         };
 226 };