3 #include "skeleton.dtsi"
4 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
5 #include <dt-bindings/mfd/qcom-rpm.h>
6 #include <dt-bindings/clock/qcom,rpmcc.h>
7 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
8 #include <dt-bindings/soc/qcom,gsbi.h>
9 #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/gpio/gpio.h>
14 model = "Qualcomm IPQ8064";
15 compatible = "qcom,ipq8064";
16 interrupt-parent = <&intc>;
23 compatible = "qcom,krait";
24 enable-method = "qcom,kpss-acc-v1";
27 next-level-cache = <&L2>;
30 clocks = <&kraitcc 0>, <&kraitcc 4>;
31 clock-names = "cpu", "l2";
32 clock-latency = <100000>;
33 cpu-supply = <&smb208_s2a>;
34 voltage-tolerance = <5>;
35 cooling-min-state = <0>;
36 cooling-max-state = <10>;
38 cpu-idle-states = <&CPU_SPC>;
42 compatible = "qcom,krait";
43 enable-method = "qcom,kpss-acc-v1";
46 next-level-cache = <&L2>;
49 clocks = <&kraitcc 1>, <&kraitcc 4>;
50 clock-names = "cpu", "l2";
51 clock-latency = <100000>;
52 cpu-supply = <&smb208_s2b>;
53 cooling-min-state = <0>;
54 cooling-max-state = <10>;
56 cpu-idle-states = <&CPU_SPC>;
66 qcom,l2-rates = <384000000 1000000000 1200000000>;
71 compatible = "qcom,idle-state-spc",
74 entry-latency-us = <400>;
75 exit-latency-us = <900>;
76 min-residency-us = <3000>;
83 polling-delay-passive = <0>;
85 thermal-sensors = <&tsens 0>;
89 temperature = <125000>;
91 type = "critical_high";
95 temperature = <105000>;
97 type = "configurable_hi";
101 temperature = <95000>;
103 type = "configurable_lo";
109 type = "critical_low";
115 polling-delay-passive = <0>;
117 thermal-sensors = <&tsens 1>;
121 temperature = <125000>;
123 type = "critical_high";
127 temperature = <105000>;
129 type = "configurable_hi";
133 temperature = <95000>;
135 type = "configurable_lo";
141 type = "critical_low";
147 polling-delay-passive = <0>;
149 thermal-sensors = <&tsens 2>;
153 temperature = <125000>;
155 type = "critical_high";
159 temperature = <105000>;
161 type = "configurable_hi";
165 temperature = <95000>;
167 type = "configurable_lo";
173 type = "critical_low";
179 polling-delay-passive = <0>;
181 thermal-sensors = <&tsens 3>;
185 temperature = <125000>;
187 type = "critical_high";
191 temperature = <105000>;
193 type = "configurable_hi";
197 temperature = <95000>;
199 type = "configurable_lo";
205 type = "critical_low";
211 polling-delay-passive = <0>;
213 thermal-sensors = <&tsens 4>;
217 temperature = <125000>;
219 type = "critical_high";
223 temperature = <105000>;
225 type = "configurable_hi";
229 temperature = <95000>;
231 type = "configurable_lo";
237 type = "critical_low";
243 polling-delay-passive = <0>;
245 thermal-sensors = <&tsens 5>;
249 temperature = <125000>;
251 type = "critical_high";
255 temperature = <105000>;
257 type = "configurable_hi";
261 temperature = <95000>;
263 type = "configurable_lo";
269 type = "critical_low";
275 polling-delay-passive = <0>;
277 thermal-sensors = <&tsens 6>;
281 temperature = <125000>;
283 type = "critical_high";
287 temperature = <105000>;
289 type = "configurable_hi";
293 temperature = <95000>;
295 type = "configurable_lo";
301 type = "critical_low";
307 polling-delay-passive = <0>;
309 thermal-sensors = <&tsens 7>;
313 temperature = <125000>;
315 type = "critical_high";
319 temperature = <105000>;
321 type = "configurable_hi";
325 temperature = <95000>;
327 type = "configurable_lo";
333 type = "critical_low";
339 polling-delay-passive = <0>;
341 thermal-sensors = <&tsens 8>;
345 temperature = <125000>;
347 type = "critical_high";
351 temperature = <105000>;
353 type = "configurable_hi";
357 temperature = <95000>;
359 type = "configurable_lo";
365 type = "critical_low";
371 polling-delay-passive = <0>;
373 thermal-sensors = <&tsens 9>;
377 temperature = <125000>;
379 type = "critical_high";
383 temperature = <105000>;
385 type = "configurable_hi";
389 temperature = <95000>;
391 type = "configurable_lo";
397 type = "critical_low";
403 polling-delay-passive = <0>;
405 thermal-sensors = <&tsens 10>;
409 temperature = <125000>;
411 type = "critical_high";
415 temperature = <105000>;
417 type = "configurable_hi";
421 temperature = <95000>;
423 type = "configurable_lo";
429 type = "critical_low";
436 compatible = "qcom,krait-pmu";
437 interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
438 IRQ_TYPE_LEVEL_HIGH)>;
442 #address-cells = <1>;
447 reg = <0x40000000 0x1000000>;
451 smem: smem@41000000 {
452 reg = <0x41000000 0x200000>;
459 compatible = "fixed-clock";
461 clock-frequency = <25000000>;
465 compatible = "fixed-clock";
467 clock-frequency = <25000000>;
470 sleep_clk: sleep_clk {
471 compatible = "fixed-clock";
472 clock-frequency = <32768>;
479 compatible = "qcom,scm-ipq806x";
483 kraitcc: clock-controller {
484 compatible = "qcom,krait-cc-v1";
490 qcom,speed0-pvs0-bin-v0 =
491 < 1400000000 1250000 >,
492 < 1200000000 1200000 >,
493 < 1000000000 1150000 >,
494 < 800000000 1100000 >,
495 < 600000000 1050000 >,
496 < 384000000 1000000 >;
498 qcom,speed0-pvs1-bin-v0 =
499 < 1400000000 1175000 >,
500 < 1200000000 1125000 >,
501 < 1000000000 1075000 >,
502 < 800000000 1025000 >,
503 < 600000000 975000 >,
504 < 384000000 925000 >;
506 qcom,speed0-pvs2-bin-v0 =
507 < 1400000000 1125000 >,
508 < 1200000000 1075000 >,
509 < 1000000000 1025000 >,
510 < 800000000 995000 >,
511 < 600000000 925000 >,
512 < 384000000 875000 >;
514 qcom,speed0-pvs3-bin-v0 =
515 < 1400000000 1050000 >,
516 < 1200000000 1000000 >,
517 < 1000000000 950000 >,
518 < 800000000 900000 >,
519 < 600000000 850000 >,
520 < 384000000 800000 >;
524 #address-cells = <1>;
527 compatible = "simple-bus";
530 compatible = "qcom,lpass-cpu";
532 clocks = <&lcc AHBIX_CLK>,
535 clock-names = "ahbix-clk",
538 interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
539 interrupt-names = "lpass-irq-lpaif";
540 reg = <0x28100000 0x10000>;
541 reg-names = "lpass-lpaif";
544 qfprom: qfprom@700000 {
545 compatible = "qcom,qfprom", "syscon";
546 reg = <0x700000 0x1000>;
547 #address-cells = <1>;
550 tsens_calib: calib@400 {
553 tsens_backup: backup@410 {
559 compatible = "qcom,rpm-ipq8064";
560 reg = <0x108000 0x1000>;
561 qcom,ipc = <&l2cc 0x8 2>;
563 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
564 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
565 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
566 interrupt-names = "ack",
570 clocks = <&gcc RPM_MSG_RAM_H_CLK>;
573 #address-cells = <1>;
576 rpmcc: clock-controller {
577 compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
582 compatible = "qcom,rpm-smb208-regulators";
585 regulator-min-microvolt = <1050000>;
586 regulator-max-microvolt = <1150000>;
588 qcom,switch-mode-frequency = <1200000>;
593 regulator-min-microvolt = <1050000>;
594 regulator-max-microvolt = <1150000>;
596 qcom,switch-mode-frequency = <1200000>;
600 regulator-min-microvolt = < 800000>;
601 regulator-max-microvolt = <1250000>;
603 qcom,switch-mode-frequency = <1200000>;
607 regulator-min-microvolt = < 800000>;
608 regulator-max-microvolt = <1250000>;
610 qcom,switch-mode-frequency = <1200000>;
616 compatible = "qcom,prng";
617 reg = <0x1a500000 0x200>;
618 clocks = <&gcc PRNG_CLK>;
619 clock-names = "core";
622 qcom_pinmux: pinmux@800000 {
623 compatible = "qcom,ipq8064-pinctrl";
624 reg = <0x800000 0x4000>;
628 interrupt-controller;
629 #interrupt-cells = <2>;
630 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
632 pcie0_pins: pcie0_pinmux {
635 function = "pcie1_rst";
636 drive-strength = <2>;
641 pcie1_pins: pcie1_pinmux {
644 function = "pcie2_rst";
645 drive-strength = <2>;
650 pcie2_pins: pcie2_pinmux {
653 function = "pcie3_rst";
654 drive-strength = <2>;
662 pins = "gpio18", "gpio19", "gpio21";
664 drive-strength = <10>;
669 leds_pins: leds_pins {
671 pins = "gpio7", "gpio8", "gpio9",
674 drive-strength = <2>;
680 buttons_pins: buttons_pins {
683 drive-strength = <2>;
689 intc: interrupt-controller@2000000 {
690 compatible = "qcom,msm-qgic2";
691 interrupt-controller;
692 #interrupt-cells = <3>;
693 reg = <0x02000000 0x1000>,
698 compatible = "qcom,kpss-timer", "qcom,msm-timer";
699 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
700 IRQ_TYPE_EDGE_RISING)>,
701 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
702 IRQ_TYPE_EDGE_RISING)>,
703 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
704 IRQ_TYPE_EDGE_RISING)>,
705 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
706 IRQ_TYPE_EDGE_RISING)>,
707 <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
708 IRQ_TYPE_EDGE_RISING)>;
709 reg = <0x0200a000 0x100>;
710 clock-frequency = <25000000>,
712 clocks = <&sleep_clk>;
713 clock-names = "sleep";
714 cpu-offset = <0x80000>;
717 acc0: clock-controller@2088000 {
718 compatible = "qcom,kpss-acc-v1";
719 reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
720 clock-output-names = "acpu0_aux";
723 acc1: clock-controller@2098000 {
724 compatible = "qcom,kpss-acc-v1";
725 reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
726 clock-output-names = "acpu1_aux";
729 l2cc: clock-controller@2011000 {
730 compatible = "qcom,kpss-gcc", "syscon";
731 reg = <0x2011000 0x1000>;
732 clock-output-names = "acpu_l2_aux";
735 saw0: regulator@2089000 {
736 compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
737 reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
741 saw1: regulator@2099000 {
742 compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
743 reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
747 saw_l2: regulator@02012000 {
748 compatible = "qcom,saw2", "syscon";
749 reg = <0x02012000 0x1000>;
753 sic_non_secure: sic-non-secure@12100000 {
754 compatible = "syscon";
755 reg = <0x12100000 0x10000>;
758 gsbi2: gsbi@12480000 {
759 compatible = "qcom,gsbi-v1.0.0";
761 reg = <0x12480000 0x100>;
762 clocks = <&gcc GSBI2_H_CLK>;
763 clock-names = "iface";
764 #address-cells = <1>;
769 syscon-tcsr = <&tcsr>;
771 uart2: serial@12490000 {
772 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
773 reg = <0x12490000 0x1000>,
775 interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
776 clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
777 clock-names = "core", "iface";
782 compatible = "qcom,i2c-qup-v1.1.1";
783 reg = <0x124a0000 0x1000>;
784 interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
786 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
787 clock-names = "core", "iface";
790 #address-cells = <1>;
796 gsbi4: gsbi@16300000 {
797 compatible = "qcom,gsbi-v1.0.0";
799 reg = <0x16300000 0x100>;
800 clocks = <&gcc GSBI4_H_CLK>;
801 clock-names = "iface";
802 #address-cells = <1>;
807 syscon-tcsr = <&tcsr>;
809 gsbi4_serial: serial@16340000 {
810 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
811 reg = <0x16340000 0x1000>,
813 interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
814 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
815 clock-names = "core", "iface";
820 compatible = "qcom,i2c-qup-v1.1.1";
821 reg = <0x16380000 0x1000>;
822 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
824 clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
825 clock-names = "core", "iface";
828 #address-cells = <1>;
833 gsbi5: gsbi@1a200000 {
834 compatible = "qcom,gsbi-v1.0.0";
836 reg = <0x1a200000 0x100>;
837 clocks = <&gcc GSBI5_H_CLK>;
838 clock-names = "iface";
839 #address-cells = <1>;
844 syscon-tcsr = <&tcsr>;
846 uart5: serial@1a240000 {
847 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
848 reg = <0x1a240000 0x1000>,
850 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
851 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
852 clock-names = "core", "iface";
857 compatible = "qcom,i2c-qup-v1.1.1";
858 reg = <0x1a280000 0x1000>;
859 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
861 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
862 clock-names = "core", "iface";
865 #address-cells = <1>;
870 compatible = "qcom,spi-qup-v1.1.1";
871 reg = <0x1a280000 0x1000>;
872 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
874 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
875 clock-names = "core", "iface";
878 #address-cells = <1>;
883 gsbi7: gsbi@16600000 {
885 compatible = "qcom,gsbi-v1.0.0";
887 reg = <0x16600000 0x100>;
888 clocks = <&gcc GSBI7_H_CLK>;
889 clock-names = "iface";
890 #address-cells = <1>;
893 syscon-tcsr = <&tcsr>;
895 gsbi7_serial: serial@16640000 {
896 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
897 reg = <0x16640000 0x1000>,
899 interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
900 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
901 clock-names = "core", "iface";
906 sata_phy: sata-phy@1b400000 {
907 compatible = "qcom,ipq806x-sata-phy";
908 reg = <0x1b400000 0x200>;
910 clocks = <&gcc SATA_PHY_CFG_CLK>;
918 compatible = "qcom,ipq806x-ahci", "generic-ahci";
919 reg = <0x29000000 0x180>;
921 ports-implemented = <0x1>;
923 interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
925 clocks = <&gcc SFAB_SATA_S_H_CLK>,
928 <&gcc SATA_RXOOB_CLK>,
929 <&gcc SATA_PMALIVE_CLK>;
930 clock-names = "slave_face", "iface", "core",
933 assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
934 assigned-clock-rates = <100000000>, <100000000>;
937 phy-names = "sata-phy";
942 compatible = "qcom,ssbi";
943 reg = <0x00500000 0x1000>;
944 qcom,controller-type = "pmic-arbiter";
947 gcc: clock-controller@900000 {
948 compatible = "qcom,gcc-ipq8064";
949 reg = <0x00900000 0x4000>;
952 #power-domain-cells = <1>;
955 tsens: thermal-sensor@900000 {
956 compatible = "qcom,ipq8064-tsens";
957 reg = <0x900000 0x3680>;
958 nvmem-cells = <&tsens_calib>, <&tsens_backup>;
959 nvmem-cell-names = "calib", "calib_backup";
960 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
961 #thermal-sensor-cells = <1>;
964 tcsr: syscon@1a400000 {
965 compatible = "qcom,tcsr-ipq8064", "syscon";
966 reg = <0x1a400000 0x100>;
969 lcc: clock-controller@28000000 {
970 compatible = "qcom,lcc-ipq8064";
971 reg = <0x28000000 0x1000>;
976 sfpb_mutex_block: syscon@1200600 {
977 compatible = "syscon";
978 reg = <0x01200600 0x100>;
982 compatible = "qcom,dwc3-hs-usb-phy";
984 clocks = <&gcc USB30_0_UTMI_CLK>;
990 compatible = "qcom,dwc3-ss-usb-phy";
992 clocks = <&gcc USB30_0_MASTER_CLK>;
997 usb3_0: usb3@110f8800 {
998 compatible = "qcom,dwc3", "syscon";
999 #address-cells = <1>;
1001 reg = <0x110f8800 0x8000>;
1002 clocks = <&gcc USB30_0_MASTER_CLK>;
1003 clock-names = "core";
1007 resets = <&gcc USB30_0_MASTER_RESET>;
1008 reset-names = "master";
1010 status = "disabled";
1012 dwc3_0: dwc3@11000000 {
1013 compatible = "snps,dwc3";
1014 reg = <0x11000000 0xcd00>;
1015 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
1016 phys = <&hs_phy_0>, <&ss_phy_0>;
1017 phy-names = "usb2-phy", "usb3-phy";
1019 snps,dis_u3_susphy_quirk;
1023 hs_phy_1: hs_phy_1 {
1024 compatible = "qcom,dwc3-hs-usb-phy";
1026 clocks = <&gcc USB30_1_UTMI_CLK>;
1027 clock-names = "ref";
1031 ss_phy_1: ss_phy_1 {
1032 compatible = "qcom,dwc3-ss-usb-phy";
1034 clocks = <&gcc USB30_1_MASTER_CLK>;
1035 clock-names = "ref";
1039 usb3_1: usb3@100f8800 {
1040 compatible = "qcom,dwc3", "syscon";
1041 #address-cells = <1>;
1043 reg = <0x100f8800 0x8000>;
1044 clocks = <&gcc USB30_1_MASTER_CLK>;
1045 clock-names = "core";
1049 resets = <&gcc USB30_1_MASTER_RESET>;
1050 reset-names = "master";
1052 status = "disabled";
1054 dwc3_1: dwc3@10000000 {
1055 compatible = "snps,dwc3";
1056 reg = <0x10000000 0xcd00>;
1057 interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
1058 phys = <&hs_phy_1>, <&ss_phy_1>;
1059 phy-names = "usb2-phy", "usb3-phy";
1061 snps,dis_u3_susphy_quirk;
1065 pcie0: pci@1b500000 {
1066 compatible = "qcom,pcie-ipq8064";
1067 reg = <0x1b500000 0x1000
1070 0x0ff00000 0x100000>;
1071 reg-names = "dbi", "elbi", "parf", "config";
1072 device_type = "pci";
1073 linux,pci-domain = <0>;
1074 bus-range = <0x00 0xff>;
1076 #address-cells = <3>;
1079 ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
1080 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
1082 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1083 interrupt-names = "msi";
1084 #interrupt-cells = <1>;
1085 interrupt-map-mask = <0 0 0 0x7>;
1086 interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1087 <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1088 <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1089 <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1091 clocks = <&gcc PCIE_A_CLK>,
1093 <&gcc PCIE_PHY_CLK>,
1094 <&gcc PCIE_AUX_CLK>,
1095 <&gcc PCIE_ALT_REF_CLK>;
1096 clock-names = "core", "iface", "phy", "aux", "ref";
1098 assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
1099 assigned-clock-rates = <100000000>;
1101 resets = <&gcc PCIE_ACLK_RESET>,
1102 <&gcc PCIE_HCLK_RESET>,
1103 <&gcc PCIE_POR_RESET>,
1104 <&gcc PCIE_PCI_RESET>,
1105 <&gcc PCIE_PHY_RESET>,
1106 <&gcc PCIE_EXT_RESET>;
1107 reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
1109 pinctrl-0 = <&pcie0_pins>;
1110 pinctrl-names = "default";
1112 perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
1114 phy-tx0-term-offset = <7>;
1116 status = "disabled";
1119 pcie1: pci@1b700000 {
1120 compatible = "qcom,pcie-ipq8064";
1121 reg = <0x1b700000 0x1000
1124 0x31f00000 0x100000>;
1125 reg-names = "dbi", "elbi", "parf", "config";
1126 device_type = "pci";
1127 linux,pci-domain = <1>;
1128 bus-range = <0x00 0xff>;
1130 #address-cells = <3>;
1133 ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
1134 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
1136 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
1137 interrupt-names = "msi";
1138 #interrupt-cells = <1>;
1139 interrupt-map-mask = <0 0 0 0x7>;
1140 interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1141 <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1142 <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1143 <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1145 clocks = <&gcc PCIE_1_A_CLK>,
1146 <&gcc PCIE_1_H_CLK>,
1147 <&gcc PCIE_1_PHY_CLK>,
1148 <&gcc PCIE_1_AUX_CLK>,
1149 <&gcc PCIE_1_ALT_REF_CLK>;
1150 clock-names = "core", "iface", "phy", "aux", "ref";
1152 assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
1153 assigned-clock-rates = <100000000>;
1155 resets = <&gcc PCIE_1_ACLK_RESET>,
1156 <&gcc PCIE_1_HCLK_RESET>,
1157 <&gcc PCIE_1_POR_RESET>,
1158 <&gcc PCIE_1_PCI_RESET>,
1159 <&gcc PCIE_1_PHY_RESET>,
1160 <&gcc PCIE_1_EXT_RESET>;
1161 reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
1163 pinctrl-0 = <&pcie1_pins>;
1164 pinctrl-names = "default";
1166 perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
1168 phy-tx0-term-offset = <7>;
1170 status = "disabled";
1173 pcie2: pci@1b900000 {
1174 compatible = "qcom,pcie-ipq8064";
1175 reg = <0x1b900000 0x1000
1178 0x35f00000 0x100000>;
1179 reg-names = "dbi", "elbi", "parf", "config";
1180 device_type = "pci";
1181 linux,pci-domain = <2>;
1182 bus-range = <0x00 0xff>;
1184 #address-cells = <3>;
1187 ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
1188 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
1190 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
1191 interrupt-names = "msi";
1192 #interrupt-cells = <1>;
1193 interrupt-map-mask = <0 0 0 0x7>;
1194 interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1195 <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1196 <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1197 <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1199 clocks = <&gcc PCIE_2_A_CLK>,
1200 <&gcc PCIE_2_H_CLK>,
1201 <&gcc PCIE_2_PHY_CLK>,
1202 <&gcc PCIE_2_AUX_CLK>,
1203 <&gcc PCIE_2_ALT_REF_CLK>;
1204 clock-names = "core", "iface", "phy", "aux", "ref";
1206 assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
1207 assigned-clock-rates = <100000000>;
1209 resets = <&gcc PCIE_2_ACLK_RESET>,
1210 <&gcc PCIE_2_HCLK_RESET>,
1211 <&gcc PCIE_2_POR_RESET>,
1212 <&gcc PCIE_2_PCI_RESET>,
1213 <&gcc PCIE_2_PHY_RESET>,
1214 <&gcc PCIE_2_EXT_RESET>;
1215 reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
1217 pinctrl-0 = <&pcie2_pins>;
1218 pinctrl-names = "default";
1220 perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
1222 phy-tx0-term-offset = <7>;
1224 status = "disabled";
1227 adm_dma: dma@18300000 {
1228 compatible = "qcom,adm";
1229 reg = <0x18300000 0x100000>;
1230 interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
1233 clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
1234 clock-names = "core", "iface";
1236 resets = <&gcc ADM0_RESET>,
1237 <&gcc ADM0_PBUS_RESET>,
1238 <&gcc ADM0_C0_RESET>,
1239 <&gcc ADM0_C1_RESET>,
1240 <&gcc ADM0_C2_RESET>;
1241 reset-names = "clk", "pbus", "c0", "c1", "c2";
1244 status = "disabled";
1248 compatible = "qcom,ipq806x-nand";
1249 reg = <0x1ac00000 0x800>;
1251 clocks = <&gcc EBI2_CLK>,
1252 <&gcc EBI2_AON_CLK>;
1253 clock-names = "core", "aon";
1255 dmas = <&adm_dma 3>;
1257 qcom,cmd-crci = <15>;
1258 qcom,data-crci = <3>;
1260 status = "disabled";
1262 #address-cells = <1>;
1266 nss_common: syscon@03000000 {
1267 compatible = "syscon";
1268 reg = <0x03000000 0x0000FFFF>;
1271 qsgmii_csr: syscon@1bb00000 {
1272 compatible = "syscon";
1273 reg = <0x1bb00000 0x000001FF>;
1276 stmmac_axi_setup: stmmac-axi-config {
1277 snps,wr_osr_lmt = <7>;
1278 snps,rd_osr_lmt = <7>;
1279 snps,blen = <16 0 0 0 0 0 0>;
1282 gmac0: ethernet@37000000 {
1283 device_type = "network";
1284 compatible = "qcom,ipq806x-gmac";
1285 reg = <0x37000000 0x200000>;
1286 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
1287 interrupt-names = "macirq";
1289 snps,axi-config = <&stmmac_axi_setup>;
1293 qcom,nss-common = <&nss_common>;
1294 qcom,qsgmii-csr = <&qsgmii_csr>;
1296 clocks = <&gcc GMAC_CORE1_CLK>;
1297 clock-names = "stmmaceth";
1299 resets = <&gcc GMAC_CORE1_RESET>;
1300 reset-names = "stmmaceth";
1302 status = "disabled";
1305 gmac1: ethernet@37200000 {
1306 device_type = "network";
1307 compatible = "qcom,ipq806x-gmac";
1308 reg = <0x37200000 0x200000>;
1309 interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
1310 interrupt-names = "macirq";
1312 snps,axi-config = <&stmmac_axi_setup>;
1316 qcom,nss-common = <&nss_common>;
1317 qcom,qsgmii-csr = <&qsgmii_csr>;
1319 clocks = <&gcc GMAC_CORE2_CLK>;
1320 clock-names = "stmmaceth";
1322 resets = <&gcc GMAC_CORE2_RESET>;
1323 reset-names = "stmmaceth";
1325 status = "disabled";
1328 gmac2: ethernet@37400000 {
1329 device_type = "network";
1330 compatible = "qcom,ipq806x-gmac";
1331 reg = <0x37400000 0x200000>;
1332 interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
1333 interrupt-names = "macirq";
1335 snps,axi-config = <&stmmac_axi_setup>;
1339 qcom,nss-common = <&nss_common>;
1340 qcom,qsgmii-csr = <&qsgmii_csr>;
1342 clocks = <&gcc GMAC_CORE3_CLK>;
1343 clock-names = "stmmaceth";
1345 resets = <&gcc GMAC_CORE3_RESET>;
1346 reset-names = "stmmaceth";
1348 status = "disabled";
1351 gmac3: ethernet@37600000 {
1352 device_type = "network";
1353 compatible = "qcom,ipq806x-gmac";
1354 reg = <0x37600000 0x200000>;
1355 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
1356 interrupt-names = "macirq";
1358 snps,axi-config = <&stmmac_axi_setup>;
1362 qcom,nss-common = <&nss_common>;
1363 qcom,qsgmii-csr = <&qsgmii_csr>;
1365 clocks = <&gcc GMAC_CORE4_CLK>;
1366 clock-names = "stmmaceth";
1368 resets = <&gcc GMAC_CORE4_RESET>;
1369 reset-names = "stmmaceth";
1371 status = "disabled";
1374 /* Temporary fixed regulator */
1375 vsdcc_fixed: vsdcc-regulator {
1376 compatible = "regulator-fixed";
1377 regulator-name = "SDCC Power";
1378 regulator-min-microvolt = <3300000>;
1379 regulator-max-microvolt = <3300000>;
1380 regulator-always-on;
1383 sdcc1bam:dma@12402000 {
1384 compatible = "qcom,bam-v1.3.0";
1385 reg = <0x12402000 0x8000>;
1386 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1387 clocks = <&gcc SDC1_H_CLK>;
1388 clock-names = "bam_clk";
1393 sdcc3bam:dma@12182000 {
1394 compatible = "qcom,bam-v1.3.0";
1395 reg = <0x12182000 0x8000>;
1396 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1397 clocks = <&gcc SDC3_H_CLK>;
1398 clock-names = "bam_clk";
1404 compatible = "arm,amba-bus";
1405 #address-cells = <1>;
1408 sdcc1: sdcc@12400000 {
1409 status = "disabled";
1410 compatible = "arm,pl18x", "arm,primecell";
1411 arm,primecell-periphid = <0x00051180>;
1412 reg = <0x12400000 0x2000>;
1413 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
1414 interrupt-names = "cmd_irq";
1415 clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
1416 clock-names = "mclk", "apb_pclk";
1418 max-frequency = <96000000>;
1422 vmmc-supply = <&vsdcc_fixed>;
1423 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
1424 dma-names = "tx", "rx";
1427 sdcc3: sdcc@12180000 {
1428 compatible = "arm,pl18x", "arm,primecell";
1429 arm,primecell-periphid = <0x00051180>;
1430 status = "disabled";
1431 reg = <0x12180000 0x2000>;
1432 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1433 interrupt-names = "cmd_irq";
1434 clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
1435 clock-names = "mclk", "apb_pclk";
1439 max-frequency = <192000000>;
1443 vqmmc-supply = <&vsdcc_fixed>;
1444 dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
1445 dma-names = "tx", "rx";
1450 sfpb_mutex: sfpb-mutex {
1451 compatible = "qcom,sfpb-mutex";
1452 syscon = <&sfpb_mutex_block 4 4>;
1454 #hwlock-cells = <1>;
1458 compatible = "qcom,smem";
1459 memory-region = <&smem>;
1460 hwlocks = <&sfpb_mutex 3>;