target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4 R7500v2";
   7         compatible = "netgear,r7500v2", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0x1e000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22
  23                 rsvd@5fe00000 {
  24                         reg = <0x5fe00000 0x200000>;
  25                         reusable;
  26                 };
  27         };
  28
  29         aliases {
  30                 serial0 = &uart4;
  31                 mdio-gpio0 = &mdio0;
  32         };
  33
  34         chosen {
  35                 bootargs = "rootfstype=squashfs noinitrd";
  36                 linux,stdout-path = "serial0:115200n8";
  37         };
  38
  39         soc {
  40                 pinmux@800000 {
  41                         i2c4_pins: i2c4_pinmux {
  42                                 pins = "gpio12", "gpio13";
  43                                 function = "gsbi4";
  44                                 bias-disable;
  45                         };
  46
  47                         nand_pins: nand_pins {
  48                                 mux {
  49                                         pins = "gpio34", "gpio35", "gpio36",
  50                                                "gpio37", "gpio38", "gpio39",
  51                                                "gpio40", "gpio41", "gpio42",
  52                                                "gpio43", "gpio44", "gpio45",
  53                                                "gpio46", "gpio47";
  54                                         function = "nand";
  55                                         drive-strength = <10>;
  56                                         bias-disable;
  57                                 };
  58                                 pullups {
  59                                         pins = "gpio39";
  60                                         bias-pull-up;
  61                                 };
  62                                 hold {
  63                                         pins = "gpio40", "gpio41", "gpio42",
  64                                                "gpio43", "gpio44", "gpio45",
  65                                                "gpio46", "gpio47";
  66                                         bias-bus-hold;
  67                                 };
  68                         };
  69
  70                         mdio0_pins: mdio0_pins {
  71                                 mux {
  72                                         pins = "gpio0", "gpio1";
  73                                         function = "gpio";
  74                                         drive-strength = <8>;
  75                                         bias-disable;
  76                                 };
  77                         };
  78
  79                         rgmii2_pins: rgmii2_pins {
  80                                 mux {
  81                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
  82                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
  83                                         function = "rgmii2";
  84                                         drive-strength = <8>;
  85                                         bias-disable;
  86                                 };
  87                         };
  88                 };
  89
  90                 gsbi@16300000 {
  91                         qcom,mode = <GSBI_PROT_I2C_UART>;
  92                         status = "ok";
  93                         serial@16340000 {
  94                                 status = "ok";
  95                         };
  96                         /*
  97                          * The i2c device on gsbi4 should not be enabled.
  98                          * On ipq806x designs gsbi4 i2c is meant for exclusive
  99                          * RPM usage. Turning this on in kernel manifests as
 100                          * i2c failure for the RPM.
 101                          */
 102                 };
 103
 104                 sata-phy@1b400000 {
 105                         status = "ok";
 106                 };
 107
 108                 sata@29000000 {
 109                         status = "ok";
 110                 };
 111
 112                 phy@100f8800 {          /* USB3 port 1 HS phy */
 113                         status = "ok";
 114                 };
 115
 116                 phy@100f8830 {          /* USB3 port 1 SS phy */
 117                         status = "ok";
 118                 };
 119
 120                 phy@110f8800 {          /* USB3 port 0 HS phy */
 121                         status = "ok";
 122                 };
 123
 124                 phy@110f8830 {          /* USB3 port 0 SS phy */
 125                         status = "ok";
 126                 };
 127
 128                 usb30@0 {
 129                         status = "ok";
 130                 };
 131
 132                 usb30@1 {
 133                         status = "ok";
 134                 };
 135
 136                 pcie0: pci@1b500000 {
 137                         status = "ok";
 138                         reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 139                         pinctrl-0 = <&pcie0_pins>;
 140                         pinctrl-names = "default";
 141                 };
 142
 143                 pcie1: pci@1b700000 {
 144                         status = "ok";
 145                         reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 146                         pinctrl-0 = <&pcie1_pins>;
 147                         pinctrl-names = "default";
 148                 };
 149
 150                 nand@1ac00000 {
 151                         status = "ok";
 152
 153                         pinctrl-0 = <&nand_pins>;
 154                         pinctrl-names = "default";
 155
 156                         nand-ecc-strength = <4>;
 157                         nand-bus-width = <8>;
 158
 159                         #address-cells = <1>;
 160                         #size-cells = <1>;
 161
 162                         qcadata@0 {
 163                                 label = "qcadata";
 164                                 reg = <0x0000000 0x0c80000>;
 165                                 read-only;
 166                         };
 167
 168                         APPSBL@c80000 {
 169                                 label = "APPSBL";
 170                                 reg = <0x0c80000 0x0500000>;
 171                                 read-only;
 172                         };
 173
 174                         APPSBLENV@1180000 {
 175                                 label = "APPSBLENV";
 176                                 reg = <0x1180000 0x0080000>;
 177                                 read-only;
 178                         };
 179
 180                         art: art@1200000 {
 181                                 label = "art";
 182                                 reg = <0x1200000 0x0140000>;
 183                                 read-only;
 184                         };
 185
 186                         artbak: art@1340000 {
 187                                 label = "artbak";
 188                                 reg = <0x1340000 0x0140000>;
 189                                 read-only;
 190                         };
 191
 192                         kernel@1480000 {
 193                                 label = "kernel";
 194                                 reg = <0x1480000 0x0200000>;
 195                         };
 196
 197                         ubi@1680000 {
 198                                 label = "ubi";
 199                                 reg = <0x1680000 0x1E00000>;
 200                         };
 201
 202                         netgear@3480000 {
 203                                 label = "netgear";
 204                                 reg = <0x3480000 0x4480000>;
 205                                 read-only;
 206                         };
 207
 208                         reserve@7900000 {
 209                                 label = "reserve";
 210                                 reg = <0x7900000 0x0700000>;
 211                                 read-only;
 212                         };
 213
 214                         firmware@1480000 {
 215                                 label = "firmware";
 216                                 reg = <0x1480000 0x2000000>;
 217                         };
 218
 219                 };
 220
 221                 mdio0: mdio {
 222                         compatible = "virtual,mdio-gpio";
 223                         #address-cells = <1>;
 224                         #size-cells = <0>;
 225                         gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 226                         pinctrl-0 = <&mdio0_pins>;
 227                         pinctrl-names = "default";
 228
 229                         phy0: ethernet-phy@0 {
 230                                 device_type = "ethernet-phy";
 231                                 reg = <0>;
 232                                 qca,ar8327-initvals = <
 233                                         0x00004 0x7600000   /* PAD0_MODE */
 234                                         0x00008 0x1000000   /* PAD5_MODE */
 235                                         0x0000c 0x80        /* PAD6_MODE */
 236                                         0x000e4 0xaa545     /* MAC_POWER_SEL */
 237                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 238                                         0x0007c 0x4e        /* PORT0_STATUS */
 239                                         0x00094 0x4e        /* PORT6_STATUS */
 240                                         >;
 241                         };
 242
 243                         phy4: ethernet-phy@4 {
 244                                 device_type = "ethernet-phy";
 245                                 reg = <4>;
 246                         };
 247                 };
 248
 249                 gmac1: ethernet@37200000 {
 250                         status = "ok";
 251                         phy-mode = "rgmii";
 252                         qcom,id = <1>;
 253
 254                         pinctrl-0 = <&rgmii2_pins>;
 255                         pinctrl-names = "default";
 256
 257                         mtd-mac-address = <&art 6>;
 258
 259                         fixed-link {
 260                                 speed = <1000>;
 261                                 full-duplex;
 262                         };
 263                 };
 264
 265                 gmac2: ethernet@37400000 {
 266                         status = "ok";
 267                         phy-mode = "sgmii";
 268                         qcom,id = <2>;
 269
 270                         mtd-mac-address = <&art 0>;
 271
 272                         fixed-link {
 273                                 speed = <1000>;
 274                                 full-duplex;
 275                         };
 276                 };
 277         };
 278
 279         gpio-keys {
 280                 compatible = "gpio-keys";
 281
 282                 wifi {
 283                         label = "wifi";
 284                         gpios = <&qcom_pinmux 6 1>;
 285                         linux,code = <KEY_WLAN>;
 286                 };
 287
 288                 reset {
 289                         label = "reset";
 290                         gpios = <&qcom_pinmux 54 1>;
 291                         linux,code = <KEY_RESTART>;
 292                 };
 293
 294                 wps {
 295                         label = "wps";
 296                         gpios = <&qcom_pinmux 65 1>;
 297                         linux,code = <KEY_WPS_BUTTON>;
 298                 };
 299         };
 300
 301         gpio-leds {
 302                 compatible = "gpio-leds";
 303
 304                 usb1 {
 305                         label = "r7500v2:amber:usb1";
 306                         gpios = <&qcom_pinmux 7 0>;
 307                 };
 308
 309                 usb3 {
 310                         label = "r7500v2:amber:usb3";
 311                         gpios = <&qcom_pinmux 8 0>;
 312                 };
 313
 314                 status {
 315                         label = "r7500v2:amber:status";
 316                         gpios = <&qcom_pinmux 9 0>;
 317                 };
 318
 319                 internet {
 320                         label = "r7500v2:white:internet";
 321                         gpios = <&qcom_pinmux 22 0>;
 322                 };
 323
 324                 wan {
 325                         label = "r7500v2:white:wan";
 326                         gpios = <&qcom_pinmux 23 0>;
 327                 };
 328
 329                 wps {
 330                         label = "r7500v2:white:wps";
 331                         gpios = <&qcom_pinmux 24 0>;
 332                 };
 333
 334                 esata {
 335                         label = "r7500v2:white:esata";
 336                         gpios = <&qcom_pinmux 26 0>;
 337                 };
 338
 339                 power {
 340                         label = "r7500v2:white:power";
 341                         gpios = <&qcom_pinmux 53 0>;
 342                         default-state = "on";
 343                 };
 344
 345                 rfkill {
 346                         label = "r7500v2:white:rfkill";
 347                         gpios = <&qcom_pinmux 64 0>;
 348                 };
 349
 350         };
 351 };
 352
 353 &adm_dma {
 354         status = "ok";
 355 };