target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4 R7500";
   7         compatible = "netgear,r7500", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0xe000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &uart4;
  26                 mdio-gpio0 = &mdio0;
  27
  28                 led-boot = &power;
  29                 led-failsafe = &power;
  30                 led-running = &power;
  31                 led-upgrade = &power;
  32         };
  33
  34         chosen {
  35                 bootargs = "rootfstype=squashfs noinitrd";
  36                 linux,stdout-path = "serial0:115200n8";
  37         };
  38
  39         soc {
  40                 pinmux@800000 {
  41                         button_pins: button_pins {
  42                                 mux {
  43                                         pins = "gpio6", "gpio54", "gpio65";
  44                                         function = "gpio";
  45                                         drive-strength = <2>;
  46                                         bias-pull-up;
  47                                 };
  48                         };
  49
  50                         i2c4_pins: i2c4_pinmux {
  51                                 mux {
  52                                         pins = "gpio12", "gpio13";
  53                                         function = "gsbi4";
  54                                         drive-strength = <12>;
  55                                         bias-disable;
  56                                 };
  57                         };
  58
  59                         led_pins: led_pins {
  60                                 mux {
  61                                         pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
  62                                                 "gpio24","gpio26", "gpio53", "gpio64", "gpio67";
  63                                         function = "gpio";
  64                                         drive-strength = <2>;
  65                                         bias-pull-up;
  66                                 };
  67                         };
  68
  69                         mdio0_pins: mdio0_pins {
  70                                 mux {
  71                                         pins = "gpio0", "gpio1";
  72                                         function = "gpio";
  73                                         drive-strength = <8>;
  74                                         bias-disable;
  75                                 };
  76                         };
  77
  78                         nand_pins: nand_pins {
  79                                 mux {
  80                                         pins = "gpio34", "gpio35", "gpio36",
  81                                                "gpio37", "gpio38", "gpio39",
  82                                                "gpio40", "gpio41", "gpio42",
  83                                                "gpio43", "gpio44", "gpio45",
  84                                                "gpio46", "gpio47";
  85                                         function = "nand";
  86                                         drive-strength = <10>;
  87                                         bias-disable;
  88                                 };
  89                                 pullups {
  90                                         pins = "gpio39";
  91                                         bias-pull-up;
  92                                 };
  93                                 hold {
  94                                         pins = "gpio40", "gpio41", "gpio42",
  95                                                "gpio43", "gpio44", "gpio45",
  96                                                "gpio46", "gpio47";
  97                                         bias-bus-hold;
  98                                 };
  99                         };
 100
 101                         rgmii2_pins: rgmii2_pins {
 102                                 mux {
 103                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 104                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 105                                         function = "rgmii2";
 106                                         drive-strength = <8>;
 107                                         bias-disable;
 108                                 };
 109                         };
 110                 };
 111
 112                 gsbi@16300000 {
 113                         qcom,mode = <GSBI_PROT_I2C_UART>;
 114                         status = "ok";
 115                         serial@16340000 {
 116                                 status = "ok";
 117                         };
 118                         /*
 119                          * The i2c device on gsbi4 should not be enabled.
 120                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 121                          * RPM usage. Turning this on in kernel manifests as
 122                          * i2c failure for the RPM.
 123                          */
 124                 };
 125
 126                 sata-phy@1b400000 {
 127                         status = "ok";
 128                 };
 129
 130                 sata@29000000 {
 131                         status = "ok";
 132                 };
 133
 134                 phy@100f8800 {          /* USB3 port 1 HS phy */
 135                         status = "ok";
 136                 };
 137
 138                 phy@100f8830 {          /* USB3 port 1 SS phy */
 139                         status = "ok";
 140                 };
 141
 142                 phy@110f8800 {          /* USB3 port 0 HS phy */
 143                         status = "ok";
 144                 };
 145
 146                 phy@110f8830 {          /* USB3 port 0 SS phy */
 147                         status = "ok";
 148                 };
 149
 150                 usb30@0 {
 151                         status = "ok";
 152                 };
 153
 154                 usb30@1 {
 155                         status = "ok";
 156                 };
 157
 158                 pcie0: pci@1b500000 {
 159                         status = "ok";
 160                 };
 161
 162                 pcie1: pci@1b700000 {
 163                         status = "ok";
 164                 };
 165
 166                 nand@1ac00000 {
 167                         status = "ok";
 168
 169                         pinctrl-0 = <&nand_pins>;
 170                         pinctrl-names = "default";
 171
 172                         nand-ecc-strength = <4>;
 173                         nand-bus-width = <8>;
 174
 175                         #address-cells = <1>;
 176                         #size-cells = <1>;
 177
 178                         qcadata@0 {
 179                                 label = "qcadata";
 180                                 reg = <0x0000000 0x0c80000>;
 181                                 read-only;
 182                         };
 183
 184                         APPSBL@c80000 {
 185                                 label = "APPSBL";
 186                                 reg = <0x0c80000 0x0500000>;
 187                                 read-only;
 188                         };
 189
 190                         APPSBLENV@1180000 {
 191                                 label = "APPSBLENV";
 192                                 reg = <0x1180000 0x0080000>;
 193                                 read-only;
 194                         };
 195
 196                         art: art@1200000 {
 197                                 label = "art";
 198                                 reg = <0x1200000 0x0140000>;
 199                                 read-only;
 200                         };
 201
 202                         kernel@1340000 {
 203                                 label = "kernel";
 204                                 reg = <0x1340000 0x0200000>;
 205                         };
 206
 207                         ubi@1540000 {
 208                                 label = "ubi";
 209                                 reg = <0x1540000 0x1800000>;
 210                         };
 211
 212                         netgear@2d40000 {
 213                                 label = "netgear";
 214                                 reg = <0x2d40000 0x0c00000>;
 215                                 read-only;
 216                         };
 217
 218                         reserve@3940000 {
 219                                 label = "reserve";
 220                                 reg = <0x3940000 0x46c0000>;
 221                                 read-only;
 222                         };
 223
 224                         firmware@1340000 {
 225                                 label = "firmware";
 226                                 reg = <0x1340000 0x1a00000>;
 227                         };
 228
 229                 };
 230
 231                 mdio0: mdio {
 232                         compatible = "virtual,mdio-gpio";
 233                         #address-cells = <1>;
 234                         #size-cells = <0>;
 235                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 236                         pinctrl-0 = <&mdio0_pins>;
 237                         pinctrl-names = "default";
 238
 239                         phy0: ethernet-phy@0 {
 240                                 device_type = "ethernet-phy";
 241                                 reg = <0>;
 242                                 qca,ar8327-initvals = <
 243                                         0x00004 0x7600000   /* PAD0_MODE */
 244                                         0x00008 0x1000000   /* PAD5_MODE */
 245                                         0x0000c 0x80        /* PAD6_MODE */
 246                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 247                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 248                                         0x0007c 0x4e        /* PORT0_STATUS */
 249                                         0x00094 0x4e        /* PORT6_STATUS */
 250                                         >;
 251                         };
 252
 253                         phy4: ethernet-phy@4 {
 254                                 device_type = "ethernet-phy";
 255                                 reg = <4>;
 256                         };
 257                 };
 258
 259                 gmac1: ethernet@37200000 {
 260                         status = "ok";
 261                         phy-mode = "rgmii";
 262                         qcom,id = <1>;
 263
 264                         pinctrl-0 = <&rgmii2_pins>;
 265                         pinctrl-names = "default";
 266
 267                         mtd-mac-address = <&art 6>;
 268
 269                         fixed-link {
 270                                 speed = <1000>;
 271                                 full-duplex;
 272                         };
 273                 };
 274
 275                 gmac2: ethernet@37400000 {
 276                         status = "ok";
 277                         phy-mode = "sgmii";
 278                         qcom,id = <2>;
 279
 280                         mtd-mac-address = <&art 0>;
 281
 282                         fixed-link {
 283                                 speed = <1000>;
 284                                 full-duplex;
 285                         };
 286                 };
 287
 288                 rpm@108000 {
 289                         pinctrl-0 = <&i2c4_pins>;
 290                         pinctrl-names = "default";
 291                 };
 292         };
 293
 294         gpio-keys {
 295                 compatible = "gpio-keys";
 296                 pinctrl-0 = <&button_pins>;
 297                 pinctrl-names = "default";
 298
 299                 wifi {
 300                         label = "wifi";
 301                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 302                         linux,code = <KEY_RFKILL>;
 303                 };
 304
 305                 reset {
 306                         label = "reset";
 307                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 308                         linux,code = <KEY_RESTART>;
 309                 };
 310
 311                 wps {
 312                         label = "wps";
 313                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 314                         linux,code = <KEY_WPS_BUTTON>;
 315                 };
 316         };
 317
 318         gpio-leds {
 319                 compatible = "gpio-leds";
 320                 pinctrl-0 = <&led_pins>;
 321                 pinctrl-names = "default";
 322
 323                 usb1 {
 324                         label = "r7500:amber:usb1";
 325                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 326                 };
 327
 328                 usb3 {
 329                         label = "r7500:amber:usb3";
 330                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 331                 };
 332
 333                 status {
 334                         label = "r7500:amber:status";
 335                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 336                 };
 337
 338                 internet {
 339                         label = "r7500:white:internet";
 340                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 341                 };
 342
 343                 wan {
 344                         label = "r7500:white:wan";
 345                         gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 346                 };
 347
 348                 wps {
 349                         label = "r7500:white:wps";
 350                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 351                 };
 352
 353                 esata {
 354                         label = "r7500:white:esata";
 355                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 356                 };
 357
 358                 power: power {
 359                         label = "r7500:white:power";
 360                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 361                         default-state = "keep";
 362                 };
 363
 364                 rfkill {
 365                         label = "r7500:white:rfkill";
 366                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 367                 };
 368
 369                 wifi5g {
 370                         label = "r7500:white:wifi5g";
 371                         gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
 372                 };
 373         };
 374 };
 375
 376 &adm_dma {
 377         status = "ok";
 378 };