1 include $(TOPDIR)/rules.mk
2 include $(INCLUDE_DIR)/image.mk
4 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
5 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
6 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
10 KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
11 KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
12 KERNEL_PREFIX := $$(IMAGE_PREFIX)
13 KERNEL_LOADADDR := 0x80208000
14 DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
15 SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
16 IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
17 IMAGE/sysupgrade.bin/squashfs :=
20 define Device/FitImage
21 KERNEL_SUFFIX := -fit-uImage.itb
22 KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
26 define Device/FitImageLzma
27 KERNEL_SUFFIX := -fit-uImage.itb
28 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
32 define Device/FitzImage
33 KERNEL_SUFFIX := -fit-zImage.itb
34 KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
40 IMAGES := nand-factory.ubi nand-sysupgrade.bin
41 IMAGE/nand-factory.ubi := append-ubi
42 IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
45 define Device/DniImage
46 $(call Device/FitzImage)
49 IMAGES := factory.img sysupgrade.bin
50 IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
51 IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
52 append-rootfs | pad-rootfs | append-metadata | check-size
55 define Build/append-rootfshdr
56 mkimage -A $(LINUX_KARCH) \
57 -O linux -T filesystem \
58 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
59 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
60 dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
63 define Build/mkmylofw_32m
64 $(eval device_id=$(word 1,$(1)))
65 $(eval revision=$(word 2,$(1)))
68 size="$$(stat -c%s $@)" \
69 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
70 pad="(pad - (size % pad)) % pad" \
71 newsize='size + pad'; \
72 $(STAGING_DIR_HOST)/bin/mkmylofw \
73 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
74 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
79 define Build/qsdk-ipq-factory-nand-askey
80 $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
81 askey_kernel $(IMAGE_KERNEL) \
82 askey_fs $(IMAGE_ROOTFS) \
84 PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
89 -$(STAGING_DIR_HOST)/bin/mksenaofw \
90 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
91 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
97 define Build/wrgg-image
100 -d "$(WRGG_DEVNAME)" \
101 -s "$(WRGG_SIGNATURE)" \
106 define Device/8dev_habanero-dvk
107 $(call Device/FitImageLzma)
108 DEVICE_VENDOR := 8devices
109 DEVICE_MODEL := Habanero DVK
112 DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
113 IMAGES := sysupgrade.bin
114 IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
116 TARGET_DEVICES += 8dev_habanero-dvk
118 define Device/8dev_jalapeno-common
119 $(call Device/FitImage)
120 $(call Device/UbiFit)
126 define Device/8dev_jalapeno
127 $(call Device/8dev_jalapeno-common)
128 DEVICE_VENDOR := 8devices
129 DEVICE_MODEL := Jalapeno
131 TARGET_DEVICES += 8dev_jalapeno
133 define Device/alfa-network_ap120c-ac
134 $(call Device/FitImage)
135 $(call Device/UbiFit)
136 DEVICE_VENDOR := ALFA Network
137 DEVICE_MODEL := AP120C-AC
139 DEVICE_PACKAGES := kmod-usb-acm \
140 kmod-tpm-i2c-atmel uboot-envtools
144 IMAGES := nand-factory.bin nand-sysupgrade.bin
145 IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
147 TARGET_DEVICES += alfa-network_ap120c-ac
149 define Device/aruba_glenmorangie
150 $(call Device/FitImageLzma)
151 DEVICE_VENDOR := Aruba
153 DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
154 IMAGES := sysupgrade.bin
157 define Device/aruba_ap-303
158 $(call Device/aruba_glenmorangie)
159 DEVICE_MODEL := AP-303
161 TARGET_DEVICES += aruba_ap-303
163 define Device/aruba_ap-303h
164 $(call Device/aruba_glenmorangie)
165 DEVICE_MODEL := AP-303H
167 TARGET_DEVICES += aruba_ap-303h
169 define Device/aruba_ap-365
170 $(call Device/aruba_glenmorangie)
171 DEVICE_MODEL := AP-365
172 DEVICE_PACKAGES += kmod-hwmon-ad7418
174 TARGET_DEVICES += aruba_ap-365
176 define Device/asus_map-ac2200
177 $(call Device/FitImageLzma)
178 DEVICE_VENDOR := ASUS
179 DEVICE_MODEL := Lyra (MAP-AC2200)
181 IMAGES := sysupgrade.bin
182 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
184 TARGET_DEVICES += asus_map-ac2200
186 define Device/asus_rt-ac58u
187 $(call Device/FitImageLzma)
188 DEVICE_VENDOR := ASUS
189 DEVICE_MODEL := RT-AC58U
194 IMAGE_SIZE := 20439364
195 FILESYSTEMS := squashfs
196 # Someone - in their infinite wisdom - decided to put the firmware
197 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
198 # Since u-boot works with strings we either need another fixup step
199 # to add a version... or we are very careful not to add '\0' into that
200 # string and call it a day.... Yeah, we do the latter!
201 UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
202 IMAGES := sysupgrade.bin
203 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
204 kmod-usb-ledtrig-usbport
206 TARGET_DEVICES += asus_rt-ac58u
208 define Device/avm_fritzbox-4040
209 $(call Device/FitImageLzma)
211 DEVICE_MODEL := FRITZ!Box 4040
213 BOARD_NAME := fritz4040
215 UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
216 UBOOT_PARTITION_SIZE := 524288
217 IMAGES = eva.bin sysupgrade.bin
218 IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
219 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
220 DEVICE_PACKAGES := fritz-tffs fritz-caldata
222 TARGET_DEVICES += avm_fritzbox-4040
224 define Device/avm_fritzbox-7530
225 $(call Device/FitImageLzma)
227 DEVICE_MODEL := FRITZ!Box 7530
229 DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
230 IMAGES := sysupgrade.bin
232 TARGET_DEVICES += avm_fritzbox-7530
234 define Device/avm_fritzrepeater-1200
235 $(call Device/FitImageLzma)
237 DEVICE_MODEL := FRITZ!Repeater 1200
239 DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
240 IMAGES := sysupgrade.bin
242 TARGET_DEVICES += avm_fritzrepeater-1200
244 define Device/avm_fritzrepeater-3000
245 $(call Device/FitImageLzma)
247 DEVICE_MODEL := FRITZ!Repeater 3000
249 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
250 IMAGES := sysupgrade.bin
252 TARGET_DEVICES += avm_fritzrepeater-3000
254 define Device/cellc_rtl30vw
255 KERNEL_SUFFIX := -fit-uImage.itb
256 KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
257 KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
260 IMAGES := nand-factory.bin nand-sysupgrade.bin
261 IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
262 IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
263 DEVICE_VENDOR := Cell C
264 DEVICE_MODEL := RTL30VW
266 DEVICE_DTS_CONFIG := config@5
272 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
274 TARGET_DEVICES += cellc_rtl30vw
276 define Device/cilab_meshpoint-one
277 $(call Device/8dev_jalapeno-common)
278 DEVICE_VENDOR := Crisis Innovation Lab
279 DEVICE_MODEL := MeshPoint.One
280 DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
282 TARGET_DEVICES += cilab_meshpoint-one
284 define Device/compex_wpj419
285 $(call Device/FitImage)
286 $(call Device/UbiFit)
287 DEVICE_VENDOR := Compex
288 DEVICE_MODEL := WPJ419
290 DEVICE_DTS_CONFIG := config@12
294 FILESYSTEMS := squashfs
296 TARGET_DEVICES += compex_wpj419
298 define Device/compex_wpj428
299 $(call Device/FitImage)
300 DEVICE_VENDOR := Compex
301 DEVICE_MODEL := WPJ428
303 DEVICE_DTS_CONFIG := config@4
307 IMAGES = sysupgrade.bin cpximg-6a04.bin
308 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
309 IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
310 DEVICE_PACKAGES := kmod-gpio-beeper
312 TARGET_DEVICES += compex_wpj428
314 define Device/dlink_dap-2610
315 $(call Device/FitImageLzma)
316 DEVICE_VENDOR := D-Link
317 DEVICE_MODEL := DAP-2610
319 DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
321 WRGG_DEVNAME := /dev/mtdblock/8
322 WRGG_SIGNATURE := wapac30_dkbs_dap2610
324 IMAGES := sysupgrade.bin factory.bin
325 # Bootloader expects a special 160 byte header which is added by
327 # Factory image size must be larger than 6MB, and size in wrgg header must
328 # match actual factory image size to be flashable from D-Link http server.
329 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
330 # cannot be part of the wrgg image. This is solved in the factory image by
331 # having the rootfs at the end of the image (without pad-rootfs). And in
332 # the sysupgrade image only the kernel is included in the wrgg checksum,
333 # but this is not flashable from the D-link http server.
334 # append-rootfs must start on an erase block boundary.
335 IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
336 IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
337 DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
339 TARGET_DEVICES += dlink_dap-2610
341 define Device/engenius_eap1300
342 $(call Device/FitImage)
343 DEVICE_VENDOR := EnGenius
344 DEVICE_MODEL := EAP1300
345 DEVICE_DTS_CONFIG := config@4
346 BOARD_NAME := eap1300
350 IMAGES := sysupgrade.bin
351 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
353 TARGET_DEVICES += engenius_eap1300
355 define Device/engenius_eap2200
356 $(call Device/FitImage)
357 $(call Device/UbiFit)
358 DEVICE_VENDOR := EnGenius
359 DEVICE_MODEL := EAP2200
363 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
365 TARGET_DEVICES += engenius_eap2200
367 define Device/engenius_emd1
368 $(call Device/FitImage)
369 DEVICE_VENDOR := EnGenius
371 DEVICE_DTS_CONFIG := config@4
374 IMAGES := sysupgrade.bin factory.bin
375 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
376 IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
378 TARGET_DEVICES += engenius_emd1
380 define Device/engenius_emr3500
381 $(call Device/FitImage)
382 DEVICE_VENDOR := EnGenius
383 DEVICE_MODEL := EMR3500
384 DEVICE_DTS_CONFIG := config@4
388 IMAGES := sysupgrade.bin factory.bin
389 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
390 IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
392 TARGET_DEVICES += engenius_emr3500
394 define Device/engenius_ens620ext
395 $(call Device/FitImage)
396 DEVICE_VENDOR := EnGenius
397 DEVICE_MODEL := ENS620EXT
399 DEVICE_DTS_CONFIG := config@4
402 BOARD_NAME := ENS620EXT
405 PRODUCT_ID_NEW := 0xA4
412 FILESYSTEMS := squashfs
413 IMAGES := sysupgrade.bin factory_30.bin factory_35.bin
414 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
415 IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
416 IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
418 TARGET_DEVICES += engenius_ens620ext
420 define Device/ezviz_cs-w3-wd1200g-eup
421 $(call Device/FitImage)
422 DEVICE_VENDOR := EZVIZ
423 DEVICE_MODEL := CS-W3-WD1200G
424 DEVICE_VARIANT := EUP
425 DEVICE_DTS_CONFIG := config@4
428 IMAGES := sysupgrade.bin
429 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
431 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
432 ipq-wifi-ezviz_cs-w3-wd1200g-eup
434 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
436 define Device/glinet_gl-b1300
437 $(call Device/FitImage)
438 DEVICE_VENDOR := GL.iNet
439 DEVICE_MODEL := GL-B1300
440 BOARD_NAME := gl-b1300
444 IMAGES := sysupgrade.bin
445 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
447 TARGET_DEVICES += glinet_gl-b1300
449 define Device/linksys_ea6350v3
450 # The Linksys EA6350v3 has a uboot bootloader that does not
451 # support either booting lzma kernel images nor booting UBI
452 # partitions. This uboot, however, supports raw kernel images and
455 # As for the time of writing this, the device will boot the kernel
456 # from a fixed address with a fixed length of 3MiB. Also, the
457 # device has a hard-coded kernel command line that requieres the
458 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
459 # Oh... and the kernel partition overlaps with the rootfs
460 # partition (the same for alt_kernel and alt_rootfs).
462 # If you are planing re-partitioning the device, you may want to
463 # keep those details in mind:
464 # 1. The kernel adresses you should honor are 0x00000000 and
465 # 0x02800000 respectively.
466 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
467 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
468 # 4. The kernel command line from uboot is harcoded to boot with
469 # rootfs either in mtd11 or mtd13.
470 $(call Device/FitzImage)
471 DEVICE_VENDOR := Linksys
472 DEVICE_MODEL := EA6350
480 IMAGES := factory.bin sysupgrade.bin
481 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
482 DEVICE_PACKAGES := uboot-envtools
484 TARGET_DEVICES += linksys_ea6350v3
486 define Device/linksys_ea8300
487 $(call Device/FitzImage)
488 DEVICE_VENDOR := Linksys
489 DEVICE_MODEL := EA8300
495 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
496 IMAGES := sysupgrade.bin factory.bin
497 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
498 DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
500 TARGET_DEVICES += linksys_ea8300
502 define Device/meraki_mr33
503 $(call Device/FitImage)
504 DEVICE_VENDOR := Cisco Meraki
509 IMAGES = sysupgrade.bin
510 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
512 TARGET_DEVICES += meraki_mr33
514 define Device/mobipromo_cm520-79f
515 $(call Device/FitzImage)
516 $(call Device/UbiFit)
517 DEVICE_VENDOR := MobiPromo
518 DEVICE_MODEL := CM520-79F
522 DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
524 TARGET_DEVICES += mobipromo_cm520-79f
526 define Device/netgear_ex61x0v2
527 $(call Device/DniImage)
528 DEVICE_DTS_CONFIG := config@4
529 NETGEAR_BOARD_ID := EX6150v2series
530 NETGEAR_HW_ID := 29765285+16+0+128+2x2
535 define Device/netgear_ex6100v2
536 $(call Device/netgear_ex61x0v2)
537 DEVICE_VENDOR := Netgear
538 DEVICE_MODEL := EX6100
541 TARGET_DEVICES += netgear_ex6100v2
543 define Device/netgear_ex6150v2
544 $(call Device/netgear_ex61x0v2)
545 DEVICE_VENDOR := Netgear
546 DEVICE_MODEL := EX6150
549 TARGET_DEVICES += netgear_ex6150v2
551 define Device/openmesh_a42
552 $(call Device/FitImageLzma)
553 DEVICE_VENDOR := OpenMesh
556 DEVICE_DTS_CONFIG := config@om.a42
558 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
560 IMAGES = factory.bin sysupgrade.bin
561 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
562 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
563 DEVICE_PACKAGES := uboot-envtools
565 TARGET_DEVICES += openmesh_a42
567 define Device/openmesh_a62
568 $(call Device/FitImageLzma)
569 DEVICE_VENDOR := OpenMesh
572 DEVICE_DTS_CONFIG := config@om.a62
574 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
576 IMAGES = factory.bin sysupgrade.bin
577 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
578 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
579 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
582 TARGET_DEVICES += openmesh_a62
584 define Device/qcom_ap-dk01.1-c1
585 DEVICE_VENDOR := Qualcomm Atheros
586 DEVICE_MODEL := AP-DK01.1
588 BOARD_NAME := ap-dk01.1-c1
590 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
594 $(call Device/FitImage)
595 IMAGES := sysupgrade.bin
596 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
598 TARGET_DEVICES += qcom_ap-dk01.1-c1
600 define Device/qcom_ap-dk04.1-c1
601 $(call Device/FitImage)
602 $(call Device/UbiFit)
603 DEVICE_VENDOR := Qualcomm Atheros
604 DEVICE_MODEL := AP-DK04.1
607 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
612 BOARD_NAME := ap-dk04.1-c1
614 TARGET_DEVICES += qcom_ap-dk04.1-c1
616 define Device/qxwlan_e2600ac-c1
617 $(call Device/FitImage)
618 DEVICE_VENDOR := Qxwlan
619 DEVICE_MODEL := E2600AC
621 BOARD_NAME := e2600ac-c1
625 IMAGES := sysupgrade.bin
626 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
627 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
629 TARGET_DEVICES += qxwlan_e2600ac-c1
631 define Device/qxwlan_e2600ac-c2
632 $(call Device/FitImage)
633 $(call Device/UbiFit)
634 DEVICE_VENDOR := Qxwlan
635 DEVICE_MODEL := E2600AC
641 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
643 TARGET_DEVICES += qxwlan_e2600ac-c2
645 define Device/unielec_u4019-32m
646 $(call Device/FitImage)
647 DEVICE_VENDOR := Unielec
648 DEVICE_MODEL := U4019
649 DEVICE_VARIANT := 32M
650 BOARD_NAME := u4019-32m
654 IMAGES := sysupgrade.bin
655 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
657 TARGET_DEVICES += unielec_u4019-32m
659 define Device/zyxel_nbg6617
660 $(call Device/FitImageLzma)
661 DEVICE_VENDOR := ZyXEL
662 DEVICE_MODEL := NBG6617
665 ROOTFS_SIZE := 24960k
667 RAS_ROOTFS_SIZE := 19840k
668 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
669 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
670 IMAGES := sysupgrade.bin factory.bin
671 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
672 # at least as large as the one of the initial firmware image (not the current
673 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
674 # this minimum-size. However, the larger image can be flashed both ways.
675 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
676 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
677 DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
679 TARGET_DEVICES += zyxel_nbg6617
681 define Device/zyxel_wre6606
682 $(call Device/FitImage)
683 DEVICE_VENDOR := ZyXEL
684 DEVICE_MODEL := WRE6606
685 DEVICE_DTS_CONFIG := config@4
688 IMAGES := sysupgrade.bin
689 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
690 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
692 TARGET_DEVICES += zyxel_wre6606
694 $(eval $(call BuildImage))