target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
   3  * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  *
  17  */
  18
  19 #include "qcom-ipq4019.dtsi"
  20 #include <dt-bindings/gpio/gpio.h>
  21 #include <dt-bindings/input/input.h>
  22 #include <dt-bindings/soc/qcom,tcsr.h>
  23
  24 / {
  25         model = "Compex WPJ428";
  26         compatible = "compex,wpj428";
  27
  28         soc {
  29                 rng@22000 {
  30                         status = "okay";
  31                 };
  32
  33                 mdio@90000 {
  34                         status = "okay";
  35                 };
  36
  37                 ess-psgmii@98000 {
  38                         status = "okay";
  39                 };
  40
  41                 tcsr@194b000 {
  42                         /* select hostmode */
  43                         compatible = "qcom,tcsr";
  44                         reg = <0x194b000 0x100>;
  45                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  46                         status = "okay";
  47                 };
  48
  49                 tcsr@1949000 {
  50                         compatible = "qcom,tcsr";
  51                         reg = <0x1949000 0x100>;
  52                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  53                 };
  54
  55                 ess_tcsr@1953000 {
  56                         compatible = "qcom,tcsr";
  57                         reg = <0x1953000 0x1000>;
  58                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  59                 };
  60
  61                 tcsr@1957000 {
  62                         compatible = "qcom,tcsr";
  63                         reg = <0x1957000 0x100>;
  64                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  65                 };
  66
  67                 usb2: usb2@60f8800 {
  68                         status = "okay";
  69                 };
  70
  71                 usb3: usb3@8af8800 {
  72                         status = "okay";
  73                 };
  74
  75                 crypto@8e3a000 {
  76                         status = "okay";
  77                 };
  78
  79                 watchdog@b017000 {
  80                         status = "okay";
  81                 };
  82
  83                 ess-switch@c000000 {
  84                         switch_lan_bmp = <0x10>;
  85                         switch_wan_bmp = <0x20>;
  86
  87                         status = "okay";
  88                 };
  89
  90                 edma@c080000 {
  91                         status = "okay";
  92                 };
  93         };
  94
  95         gpio-keys {
  96                 compatible = "gpio-keys";
  97
  98                 reset {
  99                         label = "reset";
 100                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 101                         linux,code = <KEY_RESTART>;
 102                 };
 103         };
 104
 105         aliases {
 106                 led-boot = &status;
 107                 led-failsafe = &status;
 108                 led-upgrade = &status;
 109         };
 110
 111         gpio-leds {
 112                 compatible = "gpio-leds";
 113
 114                 status: rss4 {
 115                         label = "wpj428:green:rss4";
 116                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 117                 };
 118
 119                 rss3 {
 120                         label = "wpj428:green:rss3";
 121                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 122                 };
 123         };
 124
 125         beeper: beeper {
 126                 compatible = "gpio-beeper";
 127                 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 128         };
 129 };
 130
 131 &tlmm {
 132         serial_pins: serial_pinmux {
 133                 mux {
 134                         pins = "gpio60", "gpio61";
 135                         function = "blsp_uart0";
 136                         bias-disable;
 137                 };
 138         };
 139
 140         spi_0_pins: spi_0_pinmux {
 141                 pin {
 142                         function = "blsp_spi0";
 143                         pins = "gpio55", "gpio56", "gpio57";
 144                         drive-strength = <12>;
 145                         bias-disable;
 146                 };
 147                 pin_cs {
 148                         function = "gpio";
 149                         pins = "gpio54";
 150                         drive-strength = <2>;
 151                         bias-disable;
 152                         output-high;
 153                 };
 154         };
 155 };
 156
 157 &blsp_dma {
 158         status = "okay";
 159 };
 160
 161 &blsp1_spi1 {
 162         pinctrl-0 = <&spi_0_pins>;
 163         pinctrl-names = "default";
 164         status = "okay";
 165         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 166
 167         m25p80@0 {
 168                 compatible = "jedec,spi-nor";
 169                 reg = <0>;
 170                 spi-max-frequency = <24000000>;
 171
 172                 partitions {
 173                         compatible = "fixed-partitions";
 174                         #address-cells = <1>;
 175                         #size-cells = <1>;
 176
 177                         partition0@0 {
 178                                 label = "0:SBL1";
 179                                 reg = <0x00000000 0x00040000>;
 180                                 read-only;
 181                         };
 182                         partition1@40000 {
 183                                 label = "0:MIBIB";
 184                                 reg = <0x00040000 0x00020000>;
 185                                 read-only;
 186                         };
 187                         partition2@60000 {
 188                                 label = "0:QSEE";
 189                                 reg = <0x00060000 0x00060000>;
 190                                 read-only;
 191                         };
 192                         partition3@c0000 {
 193                                 label = "0:CDT";
 194                                 reg = <0x000c0000 0x00010000>;
 195                                 read-only;
 196                         };
 197                         partition4@d0000 {
 198                                 label = "0:DDRPARAMS";
 199                                 reg = <0x000d0000 0x00010000>;
 200                                 read-only;
 201                         };
 202                         partition5@e0000 {
 203                                 label = "0:APPSBLENV"; /* uboot env*/
 204                                 reg = <0x000e0000 0x00010000>;
 205                                 read-only;
 206                         };
 207                         partition5@f0000 {
 208                                 label = "0:APPSBL"; /* uboot */
 209                                 reg = <0x000f0000 0x00080000>;
 210                                 read-only;
 211                         };
 212                         partition5@170000 {
 213                                 label = "0:ART";
 214                                 reg = <0x00170000 0x00010000>;
 215                                 read-only;
 216                         };
 217                         partition6@180000 {
 218                                 compatible = "denx,fit";
 219                                 label = "firmware";
 220                                 reg = <0x00180000 0x01e80000>;
 221                         };
 222                 };
 223         };
 224 };
 225
 226 &blsp1_uart1 {
 227         pinctrl-0 = <&serial_pins>;
 228         pinctrl-names = "default";
 229         status = "okay";
 230 };
 231
 232 &cryptobam {
 233         status = "okay";
 234 };
 235
 236 &gmac0 {
 237         qcom,phy_mdio_addr = <4>;
 238         qcom,poll_required = <1>;
 239         qcom,forced_speed = <1000>;
 240         qcom,forced_duplex = <1>;
 241         vlan_tag = <2 0x20>;
 242 };
 243
 244 &gmac1 {
 245         qcom,phy_mdio_addr = <3>;
 246         qcom,poll_required = <1>;
 247         qcom,forced_speed = <1000>;
 248         qcom,forced_duplex = <1>;
 249         vlan_tag = <1 0x10>;
 250 };
 251
 252 &usb3_ss_phy {
 253         status = "okay";
 254 };
 255
 256 &usb3_hs_phy {
 257         status = "okay";
 258 };
 259
 260 &usb2_hs_phy {
 261         status = "okay";
 262 };
 263
 264 &wifi0 {
 265         status = "okay";
 266 };
 267
 268 &wifi1 {
 269         status = "okay";
 270 };