target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/input/linux-event-codes.h>
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8
   9 / {
  10         model = "ZyXEL NBG6617";
  11         compatible = "zyxel,nbg6617", "qcom,ipq4019";
  12
  13         chosen {
  14                 /*
  15                  * the vendor u-boot adds root and mtdparts cmdline parameters
  16                  * which we don't want... but we have to overwrite them or else
  17                  * the kernel will take them at face value.
  18                  */
  19                 bootargs-append = " mtdparts= root=31:13";
  20         };
  21
  22         aliases {
  23                 led-boot = &power;
  24                 led-failsafe = &power;
  25                 led-running = &power;
  26                 led-upgrade = &power;
  27         };
  28
  29         soc {
  30                 mdio@90000 {
  31                         status = "okay";
  32                 };
  33
  34                 ess-psgmii@98000 {
  35                         status = "okay";
  36                 };
  37
  38                 tcsr@1949000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x1949000 0x100>;
  41                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  42                 };
  43
  44                 tcsr@194b000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x194b000 0x100>;
  47                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  48                 };
  49
  50                 ess_tcsr@1953000 {
  51                         compatible = "qcom,tcsr";
  52                         reg = <0x1953000 0x1000>;
  53                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  54                 };
  55
  56                 tcsr@1957000 {
  57                         compatible = "qcom,tcsr";
  58                         reg = <0x1957000 0x100>;
  59                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  60                 };
  61
  62                 usb2@60f8800 {
  63                         status = "okay";
  64                 };
  65
  66                 usb3@8af8800 {
  67                         status = "okay";
  68                 };
  69
  70                 crypto@8e3a000 {
  71                         status = "okay";
  72                 };
  73
  74                 watchdog@b017000 {
  75                         status = "okay";
  76                 };
  77
  78                 ess-switch@c000000 {
  79                         status = "okay";
  80                 };
  81
  82                 edma@c080000 {
  83                         status = "okay";
  84                 };
  85         };
  86
  87         keys {
  88                 compatible = "gpio-keys";
  89
  90                 wlan {
  91                         label = "wlan";
  92                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  93                         linux,code = <KEY_RFKILL>;
  94                         linux,input-type = <EV_SW>;
  95                 };
  96
  97                 wps {
  98                         label = "wps";
  99                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_WPS_BUTTON>;
 101                 };
 102
 103                 reset {
 104                         label = "reset";
 105                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 106                         linux,code = <KEY_RESTART>;
 107                 };
 108         };
 109
 110         leds {
 111                 compatible = "gpio-leds";
 112                 pinctrl-0 = <&led_pins>;
 113                 pinctrl-names = "default";
 114
 115                 power: power {
 116                         label = "nbg6617:green:power";
 117                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 118                 };
 119
 120                 usb {
 121                         label = "nbg6617:green:usb";
 122                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 123                 };
 124
 125                 wlan2G {
 126                         label = "nbg6617:green:wlan2G";
 127                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 128                 };
 129
 130                 wlan5G {
 131                         label = "nbg6617:green:wlan5G";
 132                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 133                 };
 134
 135                 wps {
 136                         label = "nbg6617:green:wps";
 137                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 138                 };
 139         };
 140 };
 141
 142 &tlmm {
 143         serial_pins: serial_pinmux {
 144                 mux {
 145                         pins = "gpio60", "gpio61";
 146                         function = "blsp_uart0";
 147                         bias-disable;
 148                 };
 149         };
 150         spi_0_pins: spi_0_pinmux {
 151                 mux {
 152                         function = "blsp_spi0";
 153                         pins = "gpio55", "gpio56", "gpio57";
 154                         drive-strength = <12>;
 155                         bias-disable;
 156                 };
 157
 158                 mux_cs {
 159                         function = "gpio";
 160                         pins = "gpio54";
 161                         drive-strength = <2>;
 162                         bias-disable;
 163                         output-low;
 164                 };
 165         };
 166         led_pins: led_pinmux {
 167                 mux {
 168                         pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
 169                         drive-strength = <0x8>;
 170                         bias-disable;
 171                         output-low;
 172                 };
 173         };
 174 };
 175
 176 &blsp1_spi1 { /* BLSP1 QUP1 */
 177         pinctrl-0 = <&spi_0_pins>;
 178         pinctrl-names = "default";
 179         status = "okay";
 180         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 181
 182         mx25l25635f@0 {
 183                 compatible = "mx25l25635f", "jedec,spi-nor";
 184                 reg = <0>;
 185                 spi-max-frequency = <24000000>;
 186                 status = "okay";
 187                 m25p,fast-read;
 188
 189                 partitions {
 190                         compatible = "fixed-partitions";
 191                         #address-cells = <1>;
 192                         #size-cells = <1>;
 193
 194                         partition0@0 {
 195                                 label = "SBL1";
 196                                 reg = <0x00000000 0x00040000>;
 197                                 read-only;
 198                         };
 199                         partition1@40000 {
 200                                 label = "MIBIB";
 201                                 reg = <0x00040000 0x00020000>;
 202                                 read-only;
 203                         };
 204                         partition2@60000 {
 205                                 label = "QSEE";
 206                                 reg = <0x00060000 0x00060000>;
 207                                 read-only;
 208                         };
 209                         partition3@c0000 {
 210                                 label = "CDT";
 211                                 reg = <0x000c0000 0x00010000>;
 212                                 read-only;
 213                         };
 214                         partition4@d0000 {
 215                                 label = "DDRPARAMS";
 216                                 reg = <0x000d0000 0x00010000>;
 217                                 read-only;
 218                         };
 219                         partition5@e0000 {
 220                                 label = "APPSBL"; /* u-boot */
 221                                 reg = <0x000e0000 0x00080000>;
 222                                 /* U-Boot Standalone App "zloader" is located at 0x64000 */
 223                                 read-only;
 224                         };
 225                         partition6@160000 {
 226                                 label = "APPSBLENV"; /* u-boot env */
 227                                 reg = <0x00160000 0x00010000>;
 228                         };
 229                         partition7@170000 {
 230                                 /* make a backup of this partition! */
 231                                 label = "ART";
 232                                 reg = <0x00170000 0x00010000>;
 233                                 read-only;
 234                         };
 235                         partition8@180000 {
 236                                 label = "kernel";
 237                                 reg = <0x00180000 0x00400000>;
 238                         };
 239                         partition9@580000 {
 240                                 label = "dualflag";
 241                                 reg = <0x00580000 0x00010000>;
 242                                 read-only;
 243                         };
 244                         partition10@590000 {
 245                                 label = "header";
 246                                 reg = <0x00590000 0x00010000>;
 247                         };
 248                         partition11@5a0000 {
 249                                 label = "romd";
 250                                 reg = <0x005a0000 0x00100000>;
 251                                 read-only;
 252                         };
 253                         partition12@6a0000 {
 254                                 label = "not_root_data";
 255                                 /*
 256                                  * for some strange reason, someone at ZyXEL
 257                                  * had the "great" idea to put the rootfs_data
 258                                  * in front of rootfs... Don't do that!
 259                                  * As a result this one, full MebiByte remains
 260                                  * unused.
 261                                  */
 262                                 reg = <0x006a0000 0x00100000>;
 263                         };
 264                         partition13@7a0000 {
 265                                 label = "rootfs";
 266                                 reg = <0x007a0000 0x01860000>;
 267                         };
 268                 };
 269         };
 270 };
 271
 272 &blsp1_uart1 {
 273         pinctrl-0 = <&serial_pins>;
 274         pinctrl-names = "default";
 275         status = "okay";
 276 };
 277
 278 &cryptobam {
 279         status = "okay";
 280 };
 281
 282 &blsp_dma {
 283         status = "okay";
 284 };
 285
 286 &wifi0 {
 287         status = "okay";
 288         qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
 289 };
 290
 291 &wifi1 {
 292         status = "okay";
 293         qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
 294 };
 295
 296 &usb3_ss_phy {
 297         status = "okay";
 298 };
 299
 300 &usb3_hs_phy {
 301         status = "okay";
 302 };
 303
 304 &usb2_hs_phy {
 305         status = "okay";
 306 };