target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "AVM FRITZ!Box 4040";
  10         compatible = "avm,fritzbox-4040";
  11
  12         aliases {
  13                 led-boot = &power;
  14                 led-failsafe = &flash;
  15                 led-running = &power;
  16                 led-upgrade = &flash;
  17         };
  18
  19         soc {
  20                 rng@22000 {
  21                         status = "okay";
  22                 };
  23
  24                 mdio@90000 {
  25                         status = "okay";
  26                 };
  27
  28                 ess-psgmii@98000 {
  29                         status = "okay";
  30                 };
  31
  32                 tcsr@1949000 {
  33                         compatible = "qcom,tcsr";
  34                         reg = <0x1949000 0x100>;
  35                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  36                 };
  37
  38                 tcsr@194b000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x194b000 0x100>;
  41                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  42                 };
  43
  44                 ess_tcsr@1953000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x1953000 0x1000>;
  47                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  48                 };
  49
  50                 tcsr@1957000 {
  51                         compatible = "qcom,tcsr";
  52                         reg = <0x1957000 0x100>;
  53                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  54                 };
  55
  56                 usb2@60f8800 {
  57                         status = "okay";
  58                 };
  59
  60                 usb3@8af8800 {
  61                         status = "okay";
  62                 };
  63
  64                 crypto@8e3a000 {
  65                         status = "okay";
  66                 };
  67
  68                 watchdog@b017000 {
  69                         status = "okay";
  70                 };
  71
  72                 qca8075: ess-switch@c000000 {
  73                         status = "okay";
  74
  75                         #gpio-cells = <2>;
  76                         gpio-controller;
  77
  78                         enable-usb-power {
  79                                 gpio-hog;
  80                                 line-name = "enable USB3 power";
  81                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  82                                 output-high;
  83                         };
  84                 };
  85
  86                 edma@c080000 {
  87                         status = "okay";
  88                 };
  89         };
  90
  91         keys {
  92                 compatible = "gpio-keys";
  93
  94                 wlan {
  95                         label = "wlan";
  96                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_RFKILL>;
  98                 };
  99
 100                 wps {
 101                         label = "wps";
 102                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_WPS_BUTTON>;
 104                 };
 105         };
 106
 107         switch-leds {
 108                 compatible = "gpio-leds";
 109
 110                 wlan {
 111                         label = "fritz4040:green:wlan";
 112                         gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 panic: info_red {
 116                         label = "fritz4040:red:info";
 117                         gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
 118                         panic-indicator;
 119                 };
 120
 121                 wan {
 122                         label = "fritz4040:green:wan";
 123                         gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
 124                 };
 125
 126                 power: power {
 127                         label = "fritz4040:green:power";
 128                         gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
 129                 };
 130
 131                 lan {
 132                         label = "fritz4040:green:lan";
 133                         gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
 134                 };
 135
 136                 flash: info_amber {
 137                         label = "fritz4040:amber:info";
 138                         gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
 139                 };
 140         };
 141 };
 142
 143 &tlmm {
 144         serial_pins: serial_pinmux {
 145                 mux {
 146                         pins = "gpio60", "gpio61";
 147                         function = "blsp_uart0";
 148                         bias-disable;
 149                 };
 150         };
 151
 152         spi_0_pins: spi_0_pinmux {
 153                 mux {
 154                         function = "blsp_spi0";
 155                         pins = "gpio55", "gpio56", "gpio57";
 156                         drive-strength = <12>;
 157                         bias-disable;
 158                 };
 159
 160                 mux_cs {
 161                         function = "gpio";
 162                         pins = "gpio54";
 163                         drive-strength = <2>;
 164                         bias-disable;
 165                         output-high;
 166                 };
 167         };
 168 };
 169
 170 &cryptobam {
 171         status = "okay";
 172 };
 173
 174 &blsp_dma {
 175         status = "okay";
 176 };
 177
 178 &blsp1_spi1 { /* BLSP1 QUP1 */
 179         pinctrl-0 = <&spi_0_pins>;
 180         pinctrl-names = "default";
 181         status = "okay";
 182         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 183
 184         flash@0 {
 185                 compatible = "jedec,spi-nor";
 186                 reg = <0>;
 187                 spi-max-frequency = <24000000>;
 188                 status = "okay";
 189                 m25p,fast-read;
 190
 191                 partitions {
 192                         compatible = "fixed-partitions";
 193                         #address-cells = <1>;
 194                         #size-cells = <1>;
 195
 196                         partition0@0 {
 197                                 label = "SBL1";
 198                                 reg = <0x00000000 0x00040000>;
 199                                 read-only;
 200                         };
 201                         partition1@40000 {
 202                                 label = "MIBIB";
 203                                 reg = <0x00040000 0x00020000>;
 204                                 read-only;
 205                         };
 206                         partition2@60000 {
 207                                 label = "QSEE";
 208                                 reg = <0x00060000 0x00060000>;
 209                                 read-only;
 210                         };
 211                         partition3@c0000 {
 212                                 label = "CDT";
 213                                 reg = <0x000c0000 0x00010000>;
 214                                 read-only;
 215                         };
 216                         partition4@d0000 {
 217                                 label = "DDRPARAMS";
 218                                 reg = <0x000d0000 0x00010000>;
 219                                 read-only;
 220                         };
 221                         partition5@e0000 {
 222                                 label = "APPSBLENV"; /* uboot env - empty */
 223                                 reg = <0x000e0000 0x00010000>;
 224                                 read-only;
 225                         };
 226                         partition6@f0000 {
 227                                 label = "urlader"; /* APPSBL */
 228                                 reg = <0x000f0000 0x0002dc000>;
 229                                 read-only;
 230                         };
 231                         partition7@11dc00 {
 232                                 /* make a backup of this partition! */
 233                                 label = "urlader_config";
 234                                 reg = <0x0011dc00 0x00002400>;
 235                                 read-only;
 236                         };
 237                         partition8@120000 {
 238                                 label = "tffs1";
 239                                 reg = <0x00120000 0x00080000>;
 240                                 read-only;
 241                         };
 242                         partition9@1a0000 {
 243                                 label = "tffs2";
 244                                 reg = <0x001a0000 0x00080000>;
 245                                 read-only;
 246                         };
 247                         partition10@220000 {
 248                                 label = "uboot";
 249                                 reg = <0x00220000 0x00080000>;
 250                                 read-only;
 251                         };
 252                         partition11@2A0000 {
 253                                 compatible = "denx,fit";
 254                                 label = "firmware";
 255                                 reg = <0x002a0000 0x01c60000>;
 256                         };
 257                         partition12@1f00000 {
 258                                 label = "jffs2";
 259                                 reg = <0x01f00000 0x00100000>;
 260                         };
 261                 };
 262         };
 263 };
 264
 265 &blsp1_uart1 {
 266         pinctrl-0 = <&serial_pins>;
 267         pinctrl-names = "default";
 268         status = "okay";
 269 };
 270
 271 &usb3_ss_phy {
 272         status = "okay";
 273 };
 274
 275 &usb3_hs_phy {
 276         status = "okay";
 277 };
 278
 279 &usb2_hs_phy {
 280         status = "okay";
 281 };
 282
 283 &wifi0 {
 284         status = "okay";
 285         qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
 286 };
 287
 288 &wifi1 {
 289         status = "okay";
 290         qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
 291 };