[librecmc/librecmc.git] / target / linux / generic-2.6 / patches-2.6.24 / 700-powerpc_git.patch

diff -x .git -x .gitignore -Nur linux-2.6.24/Documentation/kernel-parameters.txt powerpc.git/Documentation/kernel-parameters.txt
--- linux-2.6.24/Documentation/kernel-parameters.txt    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/Documentation/kernel-parameters.txt     2008-01-28 20:25:33.000000000 +0100
@@ -686,6 +686,7 @@
                        See Documentation/isdn/README.HiSax.
 
        hugepages=      [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
+       hugepagesz=     [HW,IA-64,PPC] The size of the HugeTLB pages.
 
        i8042.direct    [HW] Put keyboard port into non-translated mode
        i8042.dumbkbd   [HW] Pretend that controller can only read data from
diff -x .git -x .gitignore -Nur linux-2.6.24/Documentation/powerpc/00-INDEX powerpc.git/Documentation/powerpc/00-INDEX
--- linux-2.6.24/Documentation/powerpc/00-INDEX 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/Documentation/powerpc/00-INDEX  2008-01-28 20:25:33.000000000 +0100
@@ -28,3 +28,6 @@
        - info on sound support under Linux/PPC
 zImage_layout.txt
        - info on the kernel images for Linux/PPC
+qe_firmware.txt
+       - describes the layout of firmware binaries for the Freescale QUICC
+         Engine and the code that parses and uploads the microcode therein.
diff -x .git -x .gitignore -Nur linux-2.6.24/Documentation/powerpc/booting-without-of.txt powerpc.git/Documentation/powerpc/booting-without-of.txt
--- linux-2.6.24/Documentation/powerpc/booting-without-of.txt   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/Documentation/powerpc/booting-without-of.txt    2008-01-28 20:25:33.000000000 +0100
@@ -52,7 +52,11 @@
       i) Freescale QUICC Engine module (QE)
       j) CFI or JEDEC memory-mapped NOR flash
       k) Global Utilities Block
-      l) Xilinx IP cores
+      l) Freescale Communications Processor Module
+      m) Chipselect/Local Bus
+      n) 4xx/Axon EMAC ethernet nodes
+      o) Xilinx IP cores
+      p) Freescale Synchronous Serial Interface
 
   VII - Specifying interrupt information for devices
     1) interrupts property
@@ -671,10 +675,10 @@
 
 In general, the format of an address for a device is defined by the
 parent bus type, based on the #address-cells and #size-cells
-property. In the absence of such a property, the parent's parent
-values are used, etc... The kernel requires the root node to have
-those properties defining addresses format for devices directly mapped
-on the processor bus.
+properties.  Note that the parent's parent definitions of #address-cells
+and #size-cells are not inhereted so every node with children must specify
+them.  The kernel requires the root node to have those properties defining
+addresses format for devices directly mapped on the processor bus.
 
 Those 2 properties define 'cells' for representing an address and a
 size. A "cell" is a 32-bit number. For example, if both contain 2
@@ -711,13 +715,14 @@
 like address space bits, you'll have to add a bus translator to the
 prom_parse.c file of the recent kernels for your bus type.
 
-The "reg" property only defines addresses and sizes (if #size-cells
-is non-0) within a given bus. In order to translate addresses upward
+The "reg" property only defines addresses and sizes (if #size-cells is
+non-0) within a given bus. In order to translate addresses upward
 (that is into parent bus addresses, and possibly into CPU physical
 addresses), all busses must contain a "ranges" property. If the
 "ranges" property is missing at a given level, it's assumed that
-translation isn't possible. The format of the "ranges" property for a
-bus is a list of:
+translation isn't possible, i.e., the registers are not visible on the
+parent bus.  The format of the "ranges" property for a bus is a list
+of:
 
        bus address, parent bus address, size
 
@@ -735,6 +740,10 @@
 1/1 format, unless the processor supports physical addresses greater
 than 32-bits, in which case a 2/1 format is recommended.
 
+Alternatively, the "ranges" property may be empty, indicating that the
+registers are visible on the parent bus using an identity mapping
+translation.  In other words, the parent bus address space is the same
+as the child bus address space.
 
 2) Note about "compatible" properties
 -------------------------------------
@@ -1218,16 +1227,14 @@
 
   Required properties:
     - reg : Offset and length of the register set for the device
-    - device_type : Should be "mdio"
     - compatible : Should define the compatible device type for the
-      mdio.  Currently, this is most likely to be "gianfar"
+      mdio.  Currently, this is most likely to be "fsl,gianfar-mdio"
 
   Example:
 
        mdio@24520 {
                reg = <24520 20>;
-               device_type = "mdio"; 
-               compatible = "gianfar";
+               compatible = "fsl,gianfar-mdio";
 
                ethernet-phy@0 {
                        ......
@@ -1254,6 +1261,10 @@
       services interrupts for this device.
     - phy-handle : The phandle for the PHY connected to this ethernet
       controller.
+    - fixed-link : <a b c d e> where a is emulated phy id - choose any,
+      but unique to the all specified fixed-links, b is duplex - 0 half,
+      1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
+      pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
 
   Recommended properties:
 
@@ -1408,7 +1419,6 @@
 
    Example multi port host USB controller device node :
        usb@22000 {
-               device_type = "usb";
                compatible = "fsl-usb2-mph";
                reg = <22000 1000>;
                #address-cells = <1>;
@@ -1422,7 +1432,6 @@
 
    Example dual role USB controller device node :
        usb@23000 {
-               device_type = "usb";
                compatible = "fsl-usb2-dr";
                reg = <23000 1000>;
                #address-cells = <1>;
@@ -1586,7 +1595,6 @@
    iii) USB (Universal Serial Bus Controller)
 
    Required properties:
-   - device_type : should be "usb".
    - compatible : could be "qe_udc" or "fhci-hcd".
    - mode : the could be "host" or "slave".
    - reg : Offset and length of the register set for the device
@@ -1600,7 +1608,6 @@
 
    Example(slave):
        usb@6c0 {
-               device_type = "usb";
                compatible = "qe_udc";
                reg = <6c0 40>;
                interrupts = <8b 0>;
@@ -1613,7 +1620,7 @@
 
    Required properties:
    - device_type : should be "network", "hldc", "uart", "transparent"
-    "bisync" or "atm".
+     "bisync", "atm", or "serial".
    - compatible : could be "ucc_geth" or "fsl_atm" and so on.
    - model : should be "UCC".
    - device-id : the ucc number(1-8), corresponding to UCCx in UM.
@@ -1626,6 +1633,26 @@
    - interrupt-parent : the phandle for the interrupt controller that
      services interrupts for this device.
    - pio-handle : The phandle for the Parallel I/O port configuration.
+   - port-number : for UART drivers, the port number to use, between 0 and 3.
+     This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
+     The port number is added to the minor number of the device.  Unlike the
+     CPM UART driver, the port-number is required for the QE UART driver.
+   - soft-uart : for UART drivers, if specified this means the QE UART device
+     driver should use "Soft-UART" mode, which is needed on some SOCs that have
+     broken UART hardware.  Soft-UART is provided via a microcode upload.
+   - rx-clock-name: the UCC receive clock source
+     "none": clock source is disabled
+     "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+     "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+   - tx-clock-name: the UCC transmit clock source
+     "none": clock source is disabled
+     "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+     "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+   The following two properties are deprecated.  rx-clock has been replaced
+   with rx-clock-name, and tx-clock has been replaced with tx-clock-name.
+   Drivers that currently use the deprecated properties should continue to
+   do so, in order to support older device trees, but they should be updated
+   to check for the new properties first.
    - rx-clock : represents the UCC receive clock source.
      0x00 : clock source is disabled;
      0x1~0x10 : clock source is BRG1~BRG16 respectively;
@@ -1772,6 +1799,32 @@
                };
        };
 
+   viii) Uploaded QE firmware
+
+        If a new firwmare has been uploaded to the QE (usually by the
+        boot loader), then a 'firmware' child node should be added to the QE
+        node.  This node provides information on the uploaded firmware that
+        device drivers may need.
+
+        Required properties:
+        - id: The string name of the firmware.  This is taken from the 'id'
+              member of the qe_firmware structure of the uploaded firmware.
+              Device drivers can search this string to determine if the
+              firmware they want is already present.
+        - extended-modes: The Extended Modes bitfield, taken from the
+                          firmware binary.  It is a 64-bit number represented
+                          as an array of two 32-bit numbers.
+        - virtual-traps: The virtual traps, taken from the firmware binary.
+                         It is an array of 8 32-bit numbers.
+
+        Example:
+
+               firmware {
+                       id = "Soft-UART";
+                       extended-modes = <0 0>;
+                       virtual-traps = <0 0 0 0 0 0 0 0>;
+               }
+
    j) CFI or JEDEC memory-mapped NOR flash
 
     Flash chips (Memory Technology Devices) are often used for solid state
@@ -2075,8 +2128,7 @@
 
    Example:
        localbus@f0010100 {
-               compatible = "fsl,mpc8272ads-localbus",
-                            "fsl,mpc8272-localbus",
+               compatible = "fsl,mpc8272-localbus",
                             "fsl,pq2-localbus";
                #address-cells = <2>;
                #size-cells = <1>;
@@ -2254,7 +2306,7 @@
                           available.
                           For Axon: 0x0000012a
 
-   l) Xilinx IP cores
+   o) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -2276,7 +2328,7 @@
    properties of the device node.  In general, device nodes for IP-cores
    will take the following form:
 
-       (name)@(base-address) {
+       (name): (generic-name)@(base-address) {
                compatible = "xlnx,(ip-core-name)-(HW_VER)"
                             [, (list of compatible devices), ...];
                reg = <(baseaddr) (size)>;
@@ -2286,6 +2338,9 @@
                xlnx,(parameter2) = <(int-value)>;
        };
 
+       (generic-name):   an open firmware-style name that describes the
+                       generic class of device.  Preferably, this is one word, such
+                       as 'serial' or 'ethernet'.
        (ip-core-name): the name of the ip block (given after the BEGIN
                        directive in system.mhs).  Should be in lowercase
                        and all underscores '_' converted to dashes '-'.
@@ -2294,9 +2349,9 @@
                        dropped from the parameter name, the name is converted
                        to lowercase and all underscore '_' characters are
                        converted to dashes '-'.
-       (baseaddr):     the C_BASEADDR parameter.
+       (baseaddr):     the baseaddr parameter value (often named C_BASEADDR).
        (HW_VER):       from the HW_VER parameter.
-       (size):         equals C_HIGHADDR - C_BASEADDR + 1
+       (size):         the address range size (often C_HIGHADDR - C_BASEADDR + 1).
 
    Typically, the compatible list will include the exact IP core version
    followed by an older IP core version which implements the same
@@ -2326,11 +2381,11 @@
 
    becomes the following device tree node:
 
-       opb-uartlite-0@ec100000 {
+       opb_uartlite_0: serial@ec100000 {
                device_type = "serial";
                compatible = "xlnx,opb-uartlite-1.00.b";
                reg = <ec100000 10000>;
-               interrupt-parent = <&opb-intc>;
+               interrupt-parent = <&opb_intc_0>;
                interrupts = <1 0>; // got this from the opb_intc parameters
                current-speed = <d#115200>;     // standard serial device prop
                clock-frequency = <d#50000000>; // standard serial device prop
@@ -2339,16 +2394,19 @@
                xlnx,use-parity = <0>;
        };
 
-   Some IP cores actually implement 2 or more logical devices.  In this case,
-   the device should still describe the whole IP core with a single node
-   and add a child node for each logical device.  The ranges property can
-   be used to translate from parent IP-core to the registers of each device.
-   (Note: this makes the assumption that both logical devices have the same
-   bus binding.  If this is not true, then separate nodes should be used for
-   each logical device).  The 'cell-index' property can be used to enumerate
-   logical devices within an IP core.  For example, the following is the
-   system.mhs entry for the dual ps2 controller found on the ml403 reference
-   design.
+   Some IP cores actually implement 2 or more logical devices.  In
+   this case, the device should still describe the whole IP core with
+   a single node and add a child node for each logical device.  The
+   ranges property can be used to translate from parent IP-core to the
+   registers of each device.  In addition, the parent node should be
+   compatible with the bus type 'xlnx,compound', and should contain
+   #address-cells and #size-cells, as with any other bus.  (Note: this
+   makes the assumption that both logical devices have the same bus
+   binding.  If this is not true, then separate nodes should be used
+   for each logical device).  The 'cell-index' property can be used to
+   enumerate logical devices within an IP core.  For example, the
+   following is the system.mhs entry for the dual ps2 controller found
+   on the ml403 reference design.
 
        BEGIN opb_ps2_dual_ref
                PARAMETER INSTANCE = opb_ps2_dual_ref_0
@@ -2370,21 +2428,24 @@
 
    It would result in the following device tree nodes:
 
-       opb_ps2_dual_ref_0@a9000000 {
+       opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "xlnx,compound";
                ranges = <0 a9000000 2000>;
                // If this device had extra parameters, then they would
                // go here.
                ps2@0 {
                        compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
                        reg = <0 40>;
-                       interrupt-parent = <&opb-intc>;
+                       interrupt-parent = <&opb_intc_0>;
                        interrupts = <3 0>;
                        cell-index = <0>;
                };
                ps2@1000 {
                        compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
                        reg = <1000 40>;
-                       interrupt-parent = <&opb-intc>;
+                       interrupt-parent = <&opb_intc_0>;
                        interrupts = <3 0>;
                        cell-index = <0>;
                };
@@ -2447,17 +2508,18 @@
 
    Gives this device tree (some properties removed for clarity):
 
-       plb-v34-0 {
+       plb@0 {
                #address-cells = <1>;
                #size-cells = <1>;
+               compatible = "xlnx,plb-v34-1.02.a";
                device_type = "ibm,plb";
                ranges; // 1:1 translation
 
-               plb-bram-if-cntrl-0@ffff0000 {
+               plb_bram_if_cntrl_0: bram@ffff0000 {
                        reg = <ffff0000 10000>;
                }
 
-               opb-v20-0 {
+               opb@20000000 {
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges = <20000000 20000000 20000000
@@ -2465,11 +2527,11 @@
                                  80000000 80000000 40000000
                                  c0000000 c0000000 20000000>;
 
-                       opb-uart16550-0@a0000000 {
+                       opb_uart16550_0: serial@a0000000 {
                                reg = <a00000000 2000>;
                        };
 
-                       opb-intc-0@d1000fc0 {
+                       opb_intc_0: interrupt-controller@d1000fc0 {
                                reg = <d1000fc0 20>;
                        };
                };
@@ -2514,6 +2576,46 @@
       Requred properties:
        - current-speed : Baud rate of uartlite
 
+    p) Freescale Synchronous Serial Interface
+
+       The SSI is a serial device that communicates with audio codecs.  It can
+       be programmed in AC97, I2S, left-justified, or right-justified modes.
+
+       Required properties:
+       - compatible      : compatible list, containing "fsl,ssi"
+       - cell-index      : the SSI, <0> = SSI1, <1> = SSI2, and so on
+       - reg             : offset and length of the register set for the device
+       - interrupts      : <a b> where a is the interrupt number and b is a
+                            field that represents an encoding of the sense and
+                           level information for the interrupt.  This should be
+                           encoded based on the information in section 2)
+                           depending on the type of interrupt controller you
+                           have.
+       - interrupt-parent : the phandle for the interrupt controller that
+                            services interrupts for this device.
+       - fsl,mode        : the operating mode for the SSI interface
+                           "i2s-slave" - I2S mode, SSI is clock slave
+                           "i2s-master" - I2S mode, SSI is clock master
+                           "lj-slave" - left-justified mode, SSI is clock slave
+                           "lj-master" - l.j. mode, SSI is clock master
+                           "rj-slave" - right-justified mode, SSI is clock slave
+                           "rj-master" - r.j., SSI is clock master
+                           "ac97-slave" - AC97 mode, SSI is clock slave
+                           "ac97-master" - AC97 mode, SSI is clock master
+
+       Optional properties:
+       - codec-handle    : phandle to a 'codec' node that defines an audio
+                           codec connected to this SSI.  This node is typically
+                           a child of an I2C or other control node.
+
+       Child 'codec' node required properties:
+       - compatible      : compatible list, contains the name of the codec
+
+       Child 'codec' node optional properties:
+       - clock-frequency  : The frequency of the input clock, which typically
+                            comes from an on-board dedicated oscillator.
+
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
diff -x .git -x .gitignore -Nur linux-2.6.24/Documentation/powerpc/qe_firmware.txt powerpc.git/Documentation/powerpc/qe_firmware.txt
--- linux-2.6.24/Documentation/powerpc/qe_firmware.txt  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/Documentation/powerpc/qe_firmware.txt   2008-01-28 20:25:33.000000000 +0100
@@ -0,0 +1,295 @@
+          Freescale QUICC Engine Firmware Uploading
+          -----------------------------------------
+
+(c) 2007 Timur Tabi <timur at freescale.com>,
+    Freescale Semiconductor
+
+Table of Contents
+=================
+
+  I - Software License for Firmware
+
+  II - Microcode Availability
+
+  III - Description and Terminology
+
+  IV - Microcode Programming Details
+
+  V - Firmware Structure Layout
+
+  VI - Sample Code for Creating Firmware Files
+
+Revision Information
+====================
+
+November 30, 2007: Rev 1.0 - Initial version
+
+I - Software License for Firmware
+=================================
+
+Each firmware file comes with its own software license.  For information on
+the particular license, please see the license text that is distributed with
+the firmware.
+
+II - Microcode Availability
+===========================
+
+Firmware files are distributed through various channels.  Some are available on
+http://opensource.freescale.com.  For other firmware files, please contact
+your Freescale representative or your operating system vendor.
+
+III - Description and Terminology
+================================
+
+In this document, the term 'microcode' refers to the sequence of 32-bit
+integers that compose the actual QE microcode.
+
+The term 'firmware' refers to a binary blob that contains the microcode as
+well as other data that
+
+       1) describes the microcode's purpose
+       2) describes how and where to upload the microcode
+       3) specifies the values of various registers
+       4) includes additional data for use by specific device drivers
+
+Firmware files are binary files that contain only a firmware.
+
+IV - Microcode Programming Details
+===================================
+
+The QE architecture allows for only one microcode present in I-RAM for each
+RISC processor.  To replace any current microcode, a full QE reset (which
+disables the microcode) must be performed first.
+
+QE microcode is uploaded using the following procedure:
+
+1) The microcode is placed into I-RAM at a specific location, using the
+   IRAM.IADD and IRAM.IDATA registers.
+
+2) The CERCR.CIR bit is set to 0 or 1, depending on whether the firmware
+   needs split I-RAM.  Split I-RAM is only meaningful for SOCs that have
+   QEs with multiple RISC processors, such as the 8360.  Splitting the I-RAM
+   allows each processor to run a different microcode, effectively creating an
+   asymmetric multiprocessing (AMP) system.
+
+3) The TIBCR trap registers are loaded with the addresses of the trap handlers
+   in the microcode.
+
+4) The RSP.ECCR register is programmed with the value provided.
+
+5) If necessary, device drivers that need the virtual traps and extended mode
+   data will use them.
+
+Virtual Microcode Traps
+
+These virtual traps are conditional branches in the microcode.  These are
+"soft" provisional introduced in the ROMcode in order to enable higher
+flexibility and save h/w traps If new features are activated or an issue is
+being fixed in the RAM package utilizing they should be activated.  This data
+structure signals the microcode which of these virtual traps is active.
+
+This structure contains 6 words that the application should copy to some
+specific been defined.  This table describes the structure.
+
+       ---------------------------------------------------------------
+       | Offset in |                  | Destination Offset | Size of |
+       |   array   |     Protocol     |   within PRAM      | Operand |
+       --------------------------------------------------------------|
+       |     0     | Ethernet         |      0xF8          | 4 bytes |
+       |           | interworking     |                    |         |
+       ---------------------------------------------------------------
+       |     4     | ATM              |      0xF8          | 4 bytes |
+       |           | interworking     |                    |         |
+       ---------------------------------------------------------------
+       |     8     | PPP              |      0xF8          | 4 bytes |
+       |           | interworking     |                    |         |
+       ---------------------------------------------------------------
+       |     12    | Ethernet RX      |      0x22          | 1 byte  |
+       |           | Distributor Page |                    |         |
+       ---------------------------------------------------------------
+       |     16    | ATM Globtal      |      0x28          | 1 byte  |
+       |           | Params Table     |                    |         |
+       ---------------------------------------------------------------
+       |     20    | Insert Frame     |      0xF8          | 4 bytes |
+       ---------------------------------------------------------------
+
+
+Extended Modes
+
+This is a double word bit array (64 bits) that defines special functionality
+which has an impact on the softwarew drivers.  Each bit has its own impact
+and has special instructions for the s/w associated with it.  This structure is
+described in this table:
+
+       -----------------------------------------------------------------------
+       | Bit #  |     Name     |   Description                               |
+       -----------------------------------------------------------------------
+       |   0    | General      | Indicates that prior to each host command   |
+       |        | push command | given by the application, the software must |
+       |        |              | assert a special host command (push command)|
+       |        |              | CECDR = 0x00800000.                         |
+       |        |              | CECR = 0x01c1000f.                          |
+       -----------------------------------------------------------------------
+       |   1    | UCC ATM      | Indicates that after issuing ATM RX INIT    |
+       |        | RX INIT      | command, the host must issue another special|
+       |        | push command | command (push command) and immediately      |
+       |        |              | following that re-issue the ATM RX INIT     |
+       |        |              | command. (This makes the sequence of        |
+       |        |              | initializing the ATM receiver a sequence of |
+       |        |              | three host commands)                        |
+       |        |              | CECDR = 0x00800000.                         |
+       |        |              | CECR = 0x01c1000f.                          |
+       -----------------------------------------------------------------------
+       |   2    | Add/remove   | Indicates that following the specific host  |
+       |        | command      | command: "Add/Remove entry in Hash Lookup   |
+       |        | validation   | Table" used in Interworking setup, the user |
+       |        |              | must issue another command.                 |
+       |        |              | CECDR = 0xce000003.                         |
+       |        |              | CECR = 0x01c10f58.                          |
+       -----------------------------------------------------------------------
+       |   3    | General push | Indicates that the s/w has to initialize    |
+       |        | command      | some pointers in the Ethernet thread pages  |
+       |        |              | which are used when Header Compression is   |
+       |        |              | activated.  The full details of these       |
+       |        |              | pointers is located in the software drivers.|
+       -----------------------------------------------------------------------
+       |   4    | General push | Indicates that after issuing Ethernet TX    |
+       |        | command      | INIT command, user must issue this command  |
+       |        |              | for each SNUM of Ethernet TX thread.        |
+       |        |              | CECDR = 0x00800003.                         |
+       |        |              | CECR = 0x7'b{0}, 8'b{Enet TX thread SNUM},  |
+       |        |              |        1'b{1}, 12'b{0}, 4'b{1}              |
+       -----------------------------------------------------------------------
+       | 5 - 31 |     N/A      | Reserved, set to zero.                      |
+       -----------------------------------------------------------------------
+
+V - Firmware Structure Layout
+==============================
+
+QE microcode from Freescale is typically provided as a header file.  This
+header file contains macros that define the microcode binary itself as well as
+some other data used in uploading that microcode.  The format of these files
+do not lend themselves to simple inclusion into other code.  Hence,
+the need for a more portable format.  This section defines that format.
+
+Instead of distributing a header file, the microcode and related data are
+embedded into a binary blob.  This blob is passed to the qe_upload_firmware()
+function, which parses the blob and performs everything necessary to upload
+the microcode.
+
+All integers are big-endian.  See the comments for function
+qe_upload_firmware() for up-to-date implementation information.
+
+This structure supports versioning, where the version of the structure is
+embedded into the structure itself.  To ensure forward and backwards
+compatibility, all versions of the structure must use the same 'qe_header'
+structure at the beginning.
+
+'header' (type: struct qe_header):
+       The 'length' field is the size, in bytes, of the entire structure,
+       including all the microcode embedded in it, as well as the CRC (if
+       present).
+
+       The 'magic' field is an array of three bytes that contains the letters
+       'Q', 'E', and 'F'.  This is an identifier that indicates that this
+       structure is a QE Firmware structure.
+
+       The 'version' field is a single byte that indicates the version of this
+       structure.  If the layout of the structure should ever need to be
+       changed to add support for additional types of microcode, then the
+       version number should also be changed.
+
+The 'id' field is a null-terminated string(suitable for printing) that
+identifies the firmware.
+
+The 'count' field indicates the number of 'microcode' structures.  There
+must be one and only one 'microcode' structure for each RISC processor.
+Therefore, this field also represents the number of RISC processors for this
+SOC.
+
+The 'soc' structure contains the SOC numbers and revisions used to match
+the microcode to the SOC itself.  Normally, the microcode loader should
+check the data in this structure with the SOC number and revisions, and
+only upload the microcode if there's a match.  However, this check is not
+made on all platforms.
+
+Although it is not recommended, you can specify '0' in the soc.model
+field to skip matching SOCs altogether.
+
+The 'model' field is a 16-bit number that matches the actual SOC. The
+'major' and 'minor' fields are the major and minor revision numbrs,
+respectively, of the SOC.
+
+For example, to match the 8323, revision 1.0:
+     soc.model = 8323
+     soc.major = 1
+     soc.minor = 0
+
+'padding' is neccessary for structure alignment.  This field ensures that the
+'extended_modes' field is aligned on a 64-bit boundary.
+
+'extended_modes' is a bitfield that defines special functionality which has an
+impact on the device drivers.  Each bit has its own impact and has special
+instructions for the driver associated with it.  This field is stored in
+the QE library and available to any driver that calles qe_get_firmware_info().
+
+'vtraps' is an array of 8 words that contain virtual trap values for each
+virtual traps.  As with 'extended_modes', this field is stored in the QE
+library and available to any driver that calles qe_get_firmware_info().
+
+'microcode' (type: struct qe_microcode):
+       For each RISC processor there is one 'microcode' structure.  The first
+       'microcode' structure is for the first RISC, and so on.
+
+       The 'id' field is a null-terminated string suitable for printing that
+       identifies this particular microcode.
+
+       'traps' is an array of 16 words that contain hardware trap values
+       for each of the 16 traps.  If trap[i] is 0, then this particular
+       trap is to be ignored (i.e. not written to TIBCR[i]).  The entire value
+       is written as-is to the TIBCR[i] register, so be sure to set the EN
+       and T_IBP bits if necessary.
+
+       'eccr' is the value to program into the ECCR register.
+
+       'iram_offset' is the offset into IRAM to start writing the
+       microcode.
+
+       'count' is the number of 32-bit words in the microcode.
+
+       'code_offset' is the offset, in bytes, from the beginning of this
+       structure where the microcode itself can be found.  The first
+       microcode binary should be located immediately after the 'microcode'
+       array.
+
+       'major', 'minor', and 'revision' are the major, minor, and revision
+       version numbers, respectively, of the microcode.  If all values are 0,
+       then these fields are ignored.
+
+       'reserved' is necessary for structure alignment.  Since 'microcode'
+       is an array, the 64-bit 'extended_modes' field needs to be aligned
+       on a 64-bit boundary, and this can only happen if the size of
+       'microcode' is a multiple of 8 bytes.  To ensure that, we add
+       'reserved'.
+
+After the last microcode is a 32-bit CRC.  It can be calculated using
+this algorithm:
+
+u32 crc32(const u8 *p, unsigned int len)
+{
+       unsigned int i;
+       u32 crc = 0;
+
+       while (len--) {
+          crc ^= *p++;
+          for (i = 0; i < 8; i++)
+                  crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+       }
+       return crc;
+}
+
+VI - Sample Code for Creating Firmware Files
+============================================
+
+A Python program that creates firmware binaries from the header files normally
+distributed by Freescale can be found on http://opensource.freescale.com.
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/Kconfig powerpc.git/arch/powerpc/Kconfig
--- linux-2.6.24/arch/powerpc/Kconfig   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/Kconfig    2008-01-28 21:37:04.000000000 +0100
@@ -140,6 +140,9 @@
          Used to allow a board to specify it wants a uImage built by default
        default n
 
+config REDBOOT
+       bool
+
 config PPC64_SWSUSP
        bool
        depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))
@@ -160,11 +163,13 @@
 
 config PPC_OF_PLATFORM_PCI
        bool
+       depends on PCI
        depends on PPC64 # not supported on 32 bits yet
        default n
 
 source "init/Kconfig"
 
+source "arch/powerpc/sysdev/Kconfig"
 source "arch/powerpc/platforms/Kconfig"
 
 menu "Kernel options"
@@ -417,7 +422,7 @@
 
 config ISA_DMA_API
        bool
-       default y
+       default !PPC_ISERIES || PCI
 
 menu "Bus options"
 
@@ -467,7 +472,7 @@
 config PCI
        bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
                || PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-               || PPC_PS3
+               || PPC_PS3 || 44x
        default y if !40x && !CPM2 && !8xx && !PPC_83xx \
                && !PPC_85xx && !PPC_86xx
        default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/Kconfig.debug powerpc.git/arch/powerpc/Kconfig.debug
--- linux-2.6.24/arch/powerpc/Kconfig.debug     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/Kconfig.debug      2008-01-28 20:25:49.000000000 +0100
@@ -151,6 +151,13 @@
 
 config PPC_EARLY_DEBUG
        bool "Early debugging (dangerous)"
+       help
+         Say Y to enable some early debugging facilities that may be available
+         for your processor/board combination. Those facilities are hacks
+         intended to debug problems early during boot, this should not be
+         enabled in a production kernel.
+         Note that enabling this will also cause the kernel default log level
+         to be pushed to max automatically very early during boot
 
 choice
        prompt "Early debugging console"
@@ -218,7 +225,16 @@
        depends on 44x
        help
          Select this to enable early debugging for IBM 44x chips via the
-         inbuilt serial port.
+         inbuilt serial port.  If you enable this, ensure you set
+          PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
+
+config PPC_EARLY_DEBUG_40x
+       bool "Early serial debugging for IBM/AMCC 40x CPUs"
+       depends on 40x
+       help
+         Select this to enable early debugging for IBM 40x chips via the
+         inbuilt serial port. This works on chips with a 16550 compatible
+         UART. Xilinx chips with uartlite cannot use this option.
 
 config PPC_EARLY_DEBUG_CPM
        bool "Early serial debugging for Freescale CPM-based serial ports"
@@ -235,12 +251,20 @@
        hex "Low 32 bits of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x40000200"
+       help
+         You probably want 0x40000200 for ebony boards and
+          0x40000300 for taishan
 
 config PPC_EARLY_DEBUG_44x_PHYSHIGH
        hex "EPRN of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x1"
 
+config PPC_EARLY_DEBUG_40x_PHYSADDR
+       hex "Early debug UART physical address"
+       depends on PPC_EARLY_DEBUG_40x
+       default "0xef600300"
+
 config PPC_EARLY_DEBUG_CPM_ADDR
        hex "CPM UART early debug transmit descriptor address"
        depends on PPC_EARLY_DEBUG_CPM
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/Makefile powerpc.git/arch/powerpc/Makefile
--- linux-2.6.24/arch/powerpc/Makefile  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/Makefile   2008-01-28 20:25:49.000000000 +0100
@@ -167,6 +167,9 @@
 $(BOOT_TARGETS): vmlinux
        $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
+bootwrapper_install:
+       $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+
 define archhelp
   @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
   @echo '  install         - Install kernel using'
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/4xx.c powerpc.git/arch/powerpc/boot/4xx.c
--- linux-2.6.24/arch/powerpc/boot/4xx.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/4xx.c 2008-01-28 20:25:49.000000000 +0100
@@ -22,16 +22,14 @@
 #include "dcr.h"
 
 /* Read the 4xx SDRAM controller to get size of system memory. */
-void ibm4xx_fixup_memsize(void)
+void ibm4xx_sdram_fixup_memsize(void)
 {
        int i;
        unsigned long memsize, bank_config;
 
        memsize = 0;
        for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) {
-               mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]);
-               bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
-
+               bank_config = SDRAM0_READ(sdram_bxcr[i]);
                if (bank_config & SDRAM_CONFIG_BANK_ENABLE)
                        memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
        }
@@ -39,6 +37,69 @@
        dt_fixup_memory(0, memsize);
 }
 
+/* Read the 440SPe MQ controller to get size of system memory. */
+#define DCRN_MQ0_B0BAS         0x40
+#define DCRN_MQ0_B1BAS         0x41
+#define DCRN_MQ0_B2BAS         0x42
+#define DCRN_MQ0_B3BAS         0x43
+
+static u64 ibm440spe_decode_bas(u32 bas)
+{
+       u64 base = ((u64)(bas & 0xFFE00000u)) << 2;
+
+       /* open coded because I'm paranoid about invalid values */
+       switch ((bas >> 4) & 0xFFF) {
+       case 0:
+               return 0;
+       case 0xffc:
+               return base + 0x000800000ull;
+       case 0xff8:
+               return base + 0x001000000ull;
+       case 0xff0:
+               return base + 0x002000000ull;
+       case 0xfe0:
+               return base + 0x004000000ull;
+       case 0xfc0:
+               return base + 0x008000000ull;
+       case 0xf80:
+               return base + 0x010000000ull;
+       case 0xf00:
+               return base + 0x020000000ull;
+       case 0xe00:
+               return base + 0x040000000ull;
+       case 0xc00:
+               return base + 0x080000000ull;
+       case 0x800:
+               return base + 0x100000000ull;
+       }
+       printf("Memory BAS value 0x%08x unsupported !\n", bas);
+       return 0;
+}
+
+void ibm440spe_fixup_memsize(void)
+{
+       u64 banktop, memsize = 0;
+
+       /* Ultimately, we should directly construct the memory node
+        * so we are able to handle holes in the memory address space
+        */
+       banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS));
+       if (banktop > memsize)
+               memsize = banktop;
+       banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS));
+       if (banktop > memsize)
+               memsize = banktop;
+       banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS));
+       if (banktop > memsize)
+               memsize = banktop;
+       banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS));
+       if (banktop > memsize)
+               memsize = banktop;
+
+       dt_fixup_memory(0, memsize);
+}
+
+
 /* 4xx DDR1/2 Denali memory controller support */
 /* DDR0 registers */
 #define DDR0_02                        2
@@ -77,19 +138,13 @@
 
 #define DDR_GET_VAL(val, mask, shift)  (((val) >> (shift)) & (mask))
 
-static inline u32 mfdcr_sdram0(u32 reg)
-{
-        mtdcr(DCRN_SDRAM0_CFGADDR, reg);
-        return mfdcr(DCRN_SDRAM0_CFGDATA);
-}
-
 void ibm4xx_denali_fixup_memsize(void)
 {
        u32 val, max_cs, max_col, max_row;
        u32 cs, col, row, bank, dpath;
        unsigned long memsize;
 
-       val = mfdcr_sdram0(DDR0_02);
+       val = SDRAM0_READ(DDR0_02);
        if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
                fatal("DDR controller is not initialized\n");
 
@@ -99,12 +154,12 @@
        max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
 
        /* get CS value */
-       val = mfdcr_sdram0(DDR0_10);
+       val = SDRAM0_READ(DDR0_10);
 
        val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
        cs = 0;
        while (val) {
-               if (val && 0x1)
+               if (val & 0x1)
                        cs++;
                val = val >> 1;
        }
@@ -115,15 +170,15 @@
                fatal("DDR wrong CS configuration\n");
 
        /* get data path bytes */
-       val = mfdcr_sdram0(DDR0_14);
+       val = SDRAM0_READ(DDR0_14);
 
        if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
                dpath = 8; /* 64 bits */
        else
                dpath = 4; /* 32 bits */
 
-       /* get adress pins (rows) */
-       val = mfdcr_sdram0(DDR0_42);
+       /* get address pins (rows) */
+       val = SDRAM0_READ(DDR0_42);
 
        row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
        if (row > max_row)
@@ -131,7 +186,7 @@
        row = max_row - row;
 
        /* get collomn size and banks */
-       val = mfdcr_sdram0(DDR0_43);
+       val = SDRAM0_READ(DDR0_43);
 
        col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
        if (col > max_col)
@@ -179,13 +234,17 @@
 #define EMAC_RESET 0x20000000
 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1)
 {
-       /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */
+       /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't
+        * do this for us
+        */
        if (emac0)
                *emac0 = EMAC_RESET;
        if (emac1)
                *emac1 = EMAC_RESET;
 
        mtdcr(DCRN_MAL0_CFG, MAL_RESET);
+       while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET)
+               ; /* loop until reset takes effect */
 }
 
 /* Read 4xx EBC bus bridge registers to get mappings of the peripheral
@@ -217,84 +276,335 @@
        setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32));
 }
 
-#define SPRN_CCR1 0x378
-void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
+/* Calculate 440GP clocks */
+void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
 {
-       u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
-       u32 reg;
-       u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
-
-       mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
-       reg = mfdcr(DCRN_CPR0_DATA);
-       tmp = (reg & 0x000F0000) >> 16;
-       fwdva = tmp ? tmp : 16;
-       tmp = (reg & 0x00000700) >> 8;
-       fwdvb = tmp ? tmp : 8;
-       tmp = (reg & 0x1F000000) >> 24;
-       fbdv = tmp ? tmp : 32;
-       lfbdv = (reg & 0x0000007F);
-
-       mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
-       reg = mfdcr(DCRN_CPR0_DATA);
-       tmp = (reg & 0x03000000) >> 24;
-       opbdv0 = tmp ? tmp : 4;
-
-       mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
-       reg = mfdcr(DCRN_CPR0_DATA);
-       tmp = (reg & 0x07000000) >> 24;
-       perdv0 = tmp ? tmp : 8;
-
-       mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
-       reg = mfdcr(DCRN_CPR0_DATA);
-       tmp = (reg & 0x07000000) >> 24;
-       prbdv0 = tmp ? tmp : 8;
-
-       mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
-       reg = mfdcr(DCRN_CPR0_DATA);
-       tmp = (reg & 0x03000000) >> 24;
-       spcid0 = tmp ? tmp : 4;
-
-       /* Calculate M */
-       mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
-       reg = mfdcr(DCRN_CPR0_DATA);
-       tmp = (reg & 0x03000000) >> 24;
-       if (tmp == 0) { /* PLL output */
-               tmp = (reg & 0x20000000) >> 29;
-               if (!tmp) /* PLLOUTA */
-                       m = fbdv * lfbdv * fwdva;
+       u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
+       u32 cr0 = mfdcr(DCRN_CPC0_CR0);
+       u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
+       u32 opdv = CPC0_SYS0_OPDV(sys0);
+       u32 epdv = CPC0_SYS0_EPDV(sys0);
+
+       if (sys0 & CPC0_SYS0_BYPASS) {
+               /* Bypass system PLL */
+               cpu = plb = sys_clk;
+       } else {
+               if (sys0 & CPC0_SYS0_EXTSL)
+                       /* PerClk */
+                       m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
                else
-                       m = fbdv * lfbdv * fwdvb;
+                       /* CPU clock */
+                       m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
+               cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0);
+               plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0);
        }
-       else if (tmp == 1) /* CPU output */
-               m = fbdv * fwdva;
+
+       opb = plb / opdv;
+       ebc = opb / epdv;
+
+       /* FIXME: Check if this is for all 440GP, or just Ebony */
+       if ((mfpvr() & 0xf0000fff) == 0x40000440)
+               /* Rev. B 440GP, use external system clock */
+               tb = sys_clk;
        else
-               m = perdv0 * opbdv0 * fwdvb;
+               /* Rev. C 440GP, errata force us to use internal clock */
+               tb = cpu;
 
-       vco = (m * sysclk) + (m >> 1);
-       cpu = vco / fwdva;
-       plb = vco / fwdvb / prbdv0;
-       opb = plb / opbdv0;
-       ebc = plb / perdv0;
+       if (cr0 & CPC0_CR0_U0EC)
+               /* External UART clock */
+               uart0 = ser_clk;
+       else
+               /* Internal UART clock */
+               uart0 = plb / CPC0_CR0_UDIV(cr0);
 
-       /* FIXME */
-       uart0 = ser_clk;
+       if (cr0 & CPC0_CR0_U1EC)
+               /* External UART clock */
+               uart1 = ser_clk;
+       else
+               /* Internal UART clock */
+               uart1 = plb / CPC0_CR0_UDIV(cr0);
+
+       printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
+              (sys_clk + 500000) / 1000000, sys_clk);
+
+       dt_fixup_cpu_clocks(cpu, tb, 0);
+
+       dt_fixup_clock("/plb", plb);
+       dt_fixup_clock("/plb/opb", opb);
+       dt_fixup_clock("/plb/opb/ebc", ebc);
+       dt_fixup_clock("/plb/opb/serial@40000200", uart0);
+       dt_fixup_clock("/plb/opb/serial@40000300", uart1);
+}
+
+#define SPRN_CCR1 0x378
+
+static inline u32 __fix_zero(u32 v, u32 def)
+{
+       return v ? v : def;
+}
+
+static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk,
+                                               unsigned int tmr_clk,
+                                               int per_clk_from_opb)
+{
+       /* PLL config */
+       u32 pllc  = CPR0_READ(DCRN_CPR0_PLLC);
+       u32 plld  = CPR0_READ(DCRN_CPR0_PLLD);
+
+       /* Dividers */
+       u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
+       u32 fwdva  = __fix_zero((plld >> 16) & 0xf, 16);
+       u32 fwdvb  = __fix_zero((plld >> 8) & 7, 8);
+       u32 lfbdv  = __fix_zero(plld & 0x3f, 64);
+       u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8);
+       u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8);
+       u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4);
+       u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4);
+
+       /* Input clocks for primary dividers */
+       u32 clk_a, clk_b;
+
+       /* Resulting clocks */
+       u32 cpu, plb, opb, ebc, vco;
+
+       /* Timebase */
+       u32 ccr1, tb = tmr_clk;
+
+       if (pllc & 0x40000000) {
+               u32 m;
+
+               /* Feedback path */
+               switch ((pllc >> 24) & 7) {
+               case 0:
+                       /* PLLOUTx */
+                       m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
+                       break;
+               case 1:
+                       /* CPU */
+                       m = fwdva * pradv0;
+                       break;
+               case 5:
+                       /* PERClk */
+                       m = fwdvb * prbdv0 * opbdv0 * perdv0;
+                       break;
+               default:
+                       printf("WARNING ! Invalid PLL feedback source !\n");
+                       goto bypass;
+               }
+               m *= fbdv;
+               vco = sys_clk * m;
+               clk_a = vco / fwdva;
+               clk_b = vco / fwdvb;
+       } else {
+bypass:
+               /* Bypass system PLL */
+               vco = 0;
+               clk_a = clk_b = sys_clk;
+       }
+
+       cpu = clk_a / pradv0;
+       plb = clk_b / prbdv0;
+       opb = plb / opbdv0;
+       ebc = (per_clk_from_opb ? opb : plb) / perdv0;
 
        /* Figure out timebase.  Either CPU or default TmrClk */
-       asm volatile (
-                       "mfspr  %0,%1\n"
-                       :
-                       "=&r"(reg) : "i"(SPRN_CCR1));
-       if (reg & 0x0080)
-               tb = 25000000; /* TmrClk is 25MHz */
-       else
+       ccr1 = mfspr(SPRN_CCR1);
+
+       /* If passed a 0 tmr_clk, force CPU clock */
+       if (tb == 0) {
+               ccr1 &= ~0x80u;
+               mtspr(SPRN_CCR1, ccr1);
+       }
+       if ((ccr1 & 0x0080) == 0)
                tb = cpu;
 
        dt_fixup_cpu_clocks(cpu, tb, 0);
        dt_fixup_clock("/plb", plb);
        dt_fixup_clock("/plb/opb", opb);
        dt_fixup_clock("/plb/opb/ebc", ebc);
+
+       return plb;
+}
+
+static void eplike_fixup_uart_clk(int index, const char *path,
+                                 unsigned int ser_clk,
+                                 unsigned int plb_clk)
+{
+       unsigned int sdr;
+       unsigned int clock;
+
+       switch (index) {
+       case 0:
+               sdr = SDR0_READ(DCRN_SDR0_UART0);
+               break;
+       case 1:
+               sdr = SDR0_READ(DCRN_SDR0_UART1);
+               break;
+       case 2:
+               sdr = SDR0_READ(DCRN_SDR0_UART2);
+               break;
+       case 3:
+               sdr = SDR0_READ(DCRN_SDR0_UART3);
+               break;
+       default:
+               return;
+       }
+
+       if (sdr & 0x00800000u)
+               clock = ser_clk;
+       else
+               clock = plb_clk / __fix_zero(sdr & 0xff, 256);
+
+       dt_fixup_clock(path, clock);
+}
+
+void ibm440ep_fixup_clocks(unsigned int sys_clk,
+                          unsigned int ser_clk,
+                          unsigned int tmr_clk)
+{
+       unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
+
+       /* serial clocks beed fixup based on int/ext */
+       eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
+       eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
+       eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
+       eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk);
+}
+
+void ibm440gx_fixup_clocks(unsigned int sys_clk,
+                          unsigned int ser_clk,
+                          unsigned int tmr_clk)
+{
+       unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
+
+       /* serial clocks beed fixup based on int/ext */
+       eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
+       eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
+}
+
+void ibm440spe_fixup_clocks(unsigned int sys_clk,
+                           unsigned int ser_clk,
+                           unsigned int tmr_clk)
+{
+       unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
+
+       /* serial clocks beed fixup based on int/ext */
+       eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
+       eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
+       eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
+}
+
+void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
+{
+       u32 pllmr = mfdcr(DCRN_CPC0_PLLMR);
+       u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0);
+       u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1);
+       u32 psr = mfdcr(DCRN_405_CPC0_PSR);
+       u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
+       u32 fwdv, fwdvb, fbdv, cbdv, opdv, epdv, ppdv, udiv;
+
+       fwdv = (8 - ((pllmr & 0xe0000000) >> 29));
+       fbdv = (pllmr & 0x1e000000) >> 25;
+       if (fbdv == 0)
+               fbdv = 16;
+       cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
+       opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
+       ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
+       epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
+       udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
+
+       /* check for 405GPr */
+       if ((mfpvr() & 0xfffffff0) == (0x50910951 & 0xfffffff0)) {
+               fwdvb = 8 - (pllmr & 0x00000007);
+               if (!(psr & 0x00001000)) /* PCI async mode enable == 0 */
+                       if (psr & 0x00000020) /* New mode enable */
+                               m = fwdvb * 2 * ppdv;
+                       else
+                               m = fwdvb * cbdv * ppdv;
+               else if (psr & 0x00000020) /* New mode enable */
+                       if (psr & 0x00000800) /* PerClk synch mode */
+                               m = fwdvb * 2 * epdv;
+                       else
+                               m = fbdv * fwdv;
+               else if (epdv == fbdv)
+                       m = fbdv * cbdv * epdv;
+               else
+                       m = fbdv * fwdvb * cbdv;
+
+               cpu = sys_clk * m / fwdv;
+               plb = sys_clk * m / (fwdvb * cbdv);
+       } else {
+               m = fwdv * fbdv * cbdv;
+               cpu = sys_clk * m / fwdv;
+               plb = cpu / cbdv;
+       }
+       opb = plb / opdv;
+       ebc = plb / epdv;
+
+       if (cpc0_cr0 & 0x80)
+               /* uart0 uses the external clock */
+               uart0 = ser_clk;
+       else
+               uart0 = cpu / udiv;
+
+       if (cpc0_cr0 & 0x40)
+               /* uart1 uses the external clock */
+               uart1 = ser_clk;
+       else
+               uart1 = cpu / udiv;
+
+       /* setup the timebase clock to tick at the cpu frequency */
+       cpc0_cr1 = cpc0_cr1 & ~0x00800000;
+       mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1);
+       tb = cpu;
+
+       dt_fixup_cpu_clocks(cpu, tb, 0);
+       dt_fixup_clock("/plb", plb);
+       dt_fixup_clock("/plb/opb", opb);
+       dt_fixup_clock("/plb/ebc", ebc);
+       dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
+       dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
+}
+
+
+void ibm405ep_fixup_clocks(unsigned int sys_clk)
+{
+       u32 pllmr0 = mfdcr(DCRN_CPC0_PLLMR0);
+       u32 pllmr1 = mfdcr(DCRN_CPC0_PLLMR1);
+       u32 cpc0_ucr = mfdcr(DCRN_CPC0_UCR);
+       u32 cpu, plb, opb, ebc, uart0, uart1;
+       u32 fwdva, fwdvb, fbdv, cbdv, opdv, epdv;
+       u32 pllmr0_ccdv, tb, m;
+
+       fwdva = 8 - ((pllmr1 & 0x00070000) >> 16);
+       fwdvb = 8 - ((pllmr1 & 0x00007000) >> 12);
+       fbdv = (pllmr1 & 0x00f00000) >> 20;
+       if (fbdv == 0)
+               fbdv = 16;
+
+       cbdv = ((pllmr0 & 0x00030000) >> 16) + 1; /* CPU:PLB */
+       epdv = ((pllmr0 & 0x00000300) >> 8) + 2;  /* PLB:EBC */
+       opdv = ((pllmr0 & 0x00003000) >> 12) + 1; /* PLB:OPB */
+
+       m = fbdv * fwdvb;
+
+       pllmr0_ccdv = ((pllmr0 & 0x00300000) >> 20) + 1;
+       if (pllmr1 & 0x80000000)
+               cpu = sys_clk * m / (fwdva * pllmr0_ccdv);
+       else
+               cpu = sys_clk / pllmr0_ccdv;
+
+       plb = cpu / cbdv;
+       opb = plb / opdv;
+       ebc = plb / epdv;
+       tb = cpu;
+       uart0 = cpu / (cpc0_ucr & 0x0000007f);
+       uart1 = cpu / ((cpc0_ucr & 0x00007f00) >> 8);
+
+       dt_fixup_cpu_clocks(cpu, tb, 0);
+       dt_fixup_clock("/plb", plb);
+       dt_fixup_clock("/plb/opb", opb);
+       dt_fixup_clock("/plb/ebc", ebc);
        dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
-       dt_fixup_clock("/plb/opb/serial@ef600400", uart0);
-       dt_fixup_clock("/plb/opb/serial@ef600500", uart0);
-       dt_fixup_clock("/plb/opb/serial@ef600600", uart0);
+       dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/4xx.h powerpc.git/arch/powerpc/boot/4xx.h
--- linux-2.6.24/arch/powerpc/boot/4xx.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/4xx.h 2008-01-28 20:25:49.000000000 +0100
@@ -11,12 +11,22 @@
 #ifndef _POWERPC_BOOT_4XX_H_
 #define _POWERPC_BOOT_4XX_H_
 
-void ibm4xx_fixup_memsize(void);
+void ibm4xx_sdram_fixup_memsize(void);
+void ibm440spe_fixup_memsize(void);
 void ibm4xx_denali_fixup_memsize(void);
 void ibm44x_dbcr_reset(void);
 void ibm40x_dbcr_reset(void);
 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1);
 void ibm4xx_fixup_ebc_ranges(const char *ebc);
-void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk);
+
+void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
+void ibm405ep_fixup_clocks(unsigned int sys_clk);
+void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
+void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
+                          unsigned int tmr_clk);
+void ibm440gx_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
+                          unsigned int tmr_clk);
+void ibm440spe_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
+                           unsigned int tmr_clk);
 
 #endif /* _POWERPC_BOOT_4XX_H_ */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/Makefile powerpc.git/arch/powerpc/boot/Makefile
--- linux-2.6.24/arch/powerpc/boot/Makefile     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/Makefile      2008-01-28 20:25:49.000000000 +0100
@@ -33,12 +33,15 @@
 BOOTCFLAGS     += -fno-stack-protector
 endif
 
-BOOTCFLAGS     += -I$(obj) -I$(srctree)/$(obj)
+BOOTCFLAGS     += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
 
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=440
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 
+
 zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
@@ -46,17 +49,21 @@
 $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
        $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
-src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
+src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+src-wlib := string.S crt0.S stdio.c main.c \
+               $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
                ns16550.c serial.c simple_alloc.c div64.S util.S \
                gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
                4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
                cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
                fsl-soc.c mpc8xx.c pq2.c
-src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \
+src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
                cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
                ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
                cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
-               fixed-head.S ep88xc.c cuboot-hpc2.c
+               fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \
+               cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
+               cuboot-warp.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -101,24 +108,61 @@
       cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 
 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
+       $(Q)mkdir -p $(dir $@)
        $(call if_changed_dep,bootcc)
 $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
+       $(Q)mkdir -p $(dir $@)
        $(call if_changed_dep,bootas)
 
 $(obj)/wrapper.a: $(obj-wlib) FORCE
        $(call if_changed,bootar)
 
-hostprogs-y    := addnote addRamDisk hack-coff mktree
+hostprogs-y    := addnote addRamDisk hack-coff mktree dtc
 
 targets                += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y                := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
                   $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
 
 wrapper                :=$(srctree)/$(src)/wrapper
-wrapperbits    := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
+wrapperbits    := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
                        $(wrapper) FORCE
 
 #############
+# Bits for building dtc
+# DTC_GENPARSER      := 1    # Uncomment to rebuild flex/bison output
+
+dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
+dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
+dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
+
+# prerequisites on generated files needs to be explicit
+$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
+$(obj)/dtc-src/dtc-lexer.lex.o:  $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
+
+HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
+
+targets += dtc-src/dtc-parser.tab.c
+targets += dtc-src/dtc-lexer.lex.c
+
+ifdef DTC_GENPARSER
+BISON = bison
+FLEX = flex
+
+quiet_cmd_bison = BISON   $@
+      cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
+quiet_cmd_flex = FLEX    $@
+      cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
+
+$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
+     $(call if_changed,bison)
+
+$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
+
+$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
+     $(call if_changed,flex)
+endif
+
+#############
 # Bits for building various flavours of zImage
 
 ifneq ($(CROSS32_COMPILE),)
@@ -150,15 +194,26 @@
 ifneq ($(CONFIG_DEVICE_TREE),"")
 image-$(CONFIG_PPC_8xx)                        += cuImage.8xx
 image-$(CONFIG_PPC_EP88XC)             += zImage.ep88xc
+image-$(CONFIG_EP405)                  += zImage.ep405
 image-$(CONFIG_8260)                   += cuImage.pq2
+image-$(CONFIG_EP8248E)                        += zImage.ep8248e
 image-$(CONFIG_PPC_MPC52xx)            += cuImage.52xx
+image-$(CONFIG_STORCENTER)             += cuImage.824x
 image-$(CONFIG_PPC_83xx)               += cuImage.83xx
 image-$(CONFIG_PPC_85xx)               += cuImage.85xx
 image-$(CONFIG_MPC7448HPC2)            += cuImage.hpc2
 image-$(CONFIG_EBONY)                  += treeImage.ebony cuImage.ebony
 image-$(CONFIG_BAMBOO)                 += treeImage.bamboo cuImage.bamboo
 image-$(CONFIG_SEQUOIA)                        += cuImage.sequoia
+image-$(CONFIG_RAINIER)                        += cuImage.rainier
 image-$(CONFIG_WALNUT)                 += treeImage.walnut
+image-$(CONFIG_TAISHAN)                        += cuImage.taishan
+image-$(CONFIG_KATMAI)                 += cuImage.katmai
+image-$(CONFIG_WARP)                   += cuImage.warp
+endif
+
+ifneq ($(CONFIG_REDBOOT),"")
+image-$(CONFIG_PPC_8xx)                        += zImage.redboot-8xx
 endif
 
 # For 32-bit powermacs, build the COFF and miboot images
@@ -243,3 +298,51 @@
 clean-kernel += $(addsuffix .gz,$(clean-kernel))
 # If not absolute clean-files are relative to $(obj).
 clean-files += $(addprefix $(objtree)/, $(clean-kernel))
+
+WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
+WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
+WRAPPER_BINDIR := /usr/sbin
+INSTALL := install
+
+extra-installed                := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
+hostprogs-installed    := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
+wrapper-installed      := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
+dts-installed          := $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts))
+
+all-installed          := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
+
+quiet_cmd_mkdir           = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
+      cmd_mkdir           = mkdir -p $@
+
+quiet_cmd_install        = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
+      cmd_install        = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
+
+quiet_cmd_install_dts    = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
+      cmd_install_dts    = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
+
+quiet_cmd_install_exe    = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
+      cmd_install_exe    = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
+
+quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
+      cmd_install_wrapper = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
+                               sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
+                                         -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
+
+
+$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
+       $(call cmd,mkdir)
+
+$(extra-installed)     : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
+       $(call cmd,install)
+
+$(hostprogs-installed)  : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
+       $(call cmd,install_exe)
+
+$(dts-installed)       : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
+       $(call cmd,install_dts)
+
+$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
+       $(call cmd,install_wrapper)
+
+$(obj)/bootwrapper_install: $(all-installed)
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/bamboo.c powerpc.git/arch/powerpc/boot/bamboo.c
--- linux-2.6.24/arch/powerpc/boot/bamboo.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/bamboo.c      2008-01-28 20:25:49.000000000 +0100
@@ -30,8 +30,8 @@
 {
        unsigned long sysclk = 33333333;
 
-       ibm440ep_fixup_clocks(sysclk, 11059200);
-       ibm4xx_fixup_memsize();
+       ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
+       ibm4xx_sdram_fixup_memsize();
        ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
        dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
 }
@@ -42,6 +42,6 @@
        platform_ops.exit = ibm44x_dbcr_reset;
        bamboo_mac0 = mac0;
        bamboo_mac1 = mac1;
-       ft_init(_dtb_start, 0, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-52xx.c powerpc.git/arch/powerpc/boot/cuboot-52xx.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-52xx.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-52xx.c 2008-01-28 20:25:49.000000000 +0100
@@ -53,7 +53,7 @@
                    unsigned long r6, unsigned long r7)
 {
        CUBOOT_INIT();
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
        platform_ops.fixups = platform_fixups;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-824x.c powerpc.git/arch/powerpc/boot/cuboot-824x.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-824x.c        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-824x.c 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,53 @@
+/*
+ * Old U-boot compatibility for 824x
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+
+#define TARGET_824x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+
+static void platform_fixups(void)
+{
+       void *soc;
+
+       dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+       dt_fixup_mac_addresses(bd.bi_enetaddr);
+       dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
+
+       soc = find_node_by_devtype(NULL, "soc");
+       if (soc) {
+               void *serial = NULL;
+
+               setprop(soc, "bus-frequency", &bd.bi_busfreq,
+                       sizeof(bd.bi_busfreq));
+
+               while ((serial = find_node_by_devtype(serial, "serial"))) {
+                       if (get_parent(serial) != soc)
+                               continue;
+
+                       setprop(serial, "clock-frequency", &bd.bi_busfreq,
+                               sizeof(bd.bi_busfreq));
+               }
+       }
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+       CUBOOT_INIT();
+       fdt_init(_dtb_start);
+       serial_console_init();
+       platform_ops.fixups = platform_fixups;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-83xx.c powerpc.git/arch/powerpc/boot/cuboot-83xx.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-83xx.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-83xx.c 2008-01-28 20:25:49.000000000 +0100
@@ -24,7 +24,8 @@
        void *soc;
 
        dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
-       dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+       dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+       dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
        dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
 
        /* Unfortunately, the specific model number is encoded in the
@@ -52,7 +53,7 @@
                    unsigned long r6, unsigned long r7)
 {
        CUBOOT_INIT();
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
        platform_ops.fixups = platform_fixups;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-85xx.c powerpc.git/arch/powerpc/boot/cuboot-85xx.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-85xx.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-85xx.c 2008-01-28 20:25:49.000000000 +0100
@@ -24,8 +24,9 @@
        void *soc;
 
        dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
-       dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr,
-                              bd.bi_enet2addr);
+       dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+       dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+       dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
        dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq);
 
        /* Unfortunately, the specific model number is encoded in the
@@ -53,7 +54,7 @@
                    unsigned long r6, unsigned long r7)
 {
        CUBOOT_INIT();
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
        platform_ops.fixups = platform_fixups;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-8xx.c powerpc.git/arch/powerpc/boot/cuboot-8xx.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-8xx.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-8xx.c  2008-01-28 20:25:49.000000000 +0100
@@ -41,7 +41,7 @@
                    unsigned long r6, unsigned long r7)
 {
        CUBOOT_INIT();
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
        platform_ops.fixups = platform_fixups;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-hpc2.c powerpc.git/arch/powerpc/boot/cuboot-hpc2.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-hpc2.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-hpc2.c 2008-01-28 20:25:49.000000000 +0100
@@ -42,7 +42,7 @@
                unsigned long r6, unsigned long r7)
 {
        CUBOOT_INIT();
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
        platform_ops.fixups = platform_fixups;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-katmai.c powerpc.git/arch/powerpc/boot/cuboot-katmai.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-katmai.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-katmai.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,56 @@
+/*
+ * Old U-boot compatibility for Katmai
+ *
+ * Author: Hugh Blemings <hugh@au.ibm.com>
+ *
+ * Copyright 2007 Hugh Blemings, IBM Corporation.
+ *   Based on cuboot-ebony.c which is:
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *   Based on cuboot-83xx.c, which is:
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+BSS_STACK(4096);
+
+static void katmai_fixups(void)
+{
+       unsigned long sysclk = 33333000;
+
+       /* 440SP Clock logic is all but identical to 440GX
+        * so we just use that code for now at least
+        */
+       ibm440spe_fixup_clocks(sysclk, 6 * 1843200, 0);
+
+       ibm440spe_fixup_memsize();
+
+       dt_fixup_mac_address(0, bd.bi_enetaddr);
+
+       ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                  unsigned long r6, unsigned long r7)
+{
+       CUBOOT_INIT();
+
+       platform_ops.fixups = katmai_fixups;
+       fdt_init(_dtb_start);
+       serial_console_init();
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-pq2.c powerpc.git/arch/powerpc/boot/cuboot-pq2.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-pq2.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-pq2.c  2008-01-28 20:25:49.000000000 +0100
@@ -255,7 +255,7 @@
                    unsigned long r6, unsigned long r7)
 {
        CUBOOT_INIT();
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
        platform_ops.fixups = pq2_platform_fixups;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-rainier.c powerpc.git/arch/powerpc/boot/cuboot-rainier.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-rainier.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-rainier.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,56 @@
+/*
+ * Old U-boot compatibility for Rainier
+ *
+ * Valentine Barshak <vbarshak@ru.mvista.com>
+ * Copyright 2007 MontaVista Software, Inc
+ *
+ * Based on Ebony code by David Gibson <david@gibson.dropbear.id.au>
+ * Copyright IBM Corporation, 2007
+ *
+ * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright IBM Corporation, 2007
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the License
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+
+static void rainier_fixups(void)
+{
+       unsigned long sysclk = 33333333;
+
+       ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+       ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+       ibm4xx_denali_fixup_memsize();
+       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+       CUBOOT_INIT();
+       platform_ops.fixups = rainier_fixups;
+       platform_ops.exit = ibm44x_dbcr_reset;
+       fdt_init(_dtb_start);
+       serial_console_init();
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-sequoia.c powerpc.git/arch/powerpc/boot/cuboot-sequoia.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-sequoia.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-sequoia.c      2008-01-28 20:25:49.000000000 +0100
@@ -39,7 +39,7 @@
 {
        unsigned long sysclk = 33333333;
 
-       ibm440ep_fixup_clocks(sysclk, 11059200);
+       ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
        ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
        ibm4xx_denali_fixup_memsize();
        dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
@@ -51,6 +51,6 @@
        CUBOOT_INIT();
        platform_ops.fixups = sequoia_fixups;
        platform_ops.exit = ibm44x_dbcr_reset;
-       ft_init(_dtb_start, 0, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-taishan.c powerpc.git/arch/powerpc/boot/cuboot-taishan.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-taishan.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-taishan.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,54 @@
+/*
+ * Old U-boot compatibility for Taishan
+ *
+ * Author: Hugh Blemings <hugh@au.ibm.com>
+ *
+ * Copyright 2007 Hugh Blemings, IBM Corporation.
+ *   Based on cuboot-ebony.c which is:
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *   Based on cuboot-83xx.c, which is:
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+BSS_STACK(4096);
+
+static void taishan_fixups(void)
+{
+       /* FIXME: sysclk should be derived by reading the FPGA
+          registers */
+       unsigned long sysclk = 33000000;
+
+       ibm440gx_fixup_clocks(sysclk, 6 * 1843200, 25000000);
+
+       ibm4xx_sdram_fixup_memsize();
+
+       dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+
+       ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                  unsigned long r6, unsigned long r7)
+{
+       CUBOOT_INIT();
+
+       platform_ops.fixups = taishan_fixups;
+       fdt_init(_dtb_start);
+       serial_console_init();
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/cuboot-warp.c powerpc.git/arch/powerpc/boot/cuboot-warp.c
--- linux-2.6.24/arch/powerpc/boot/cuboot-warp.c        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/cuboot-warp.c 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void warp_fixups(void)
+{
+       unsigned long sysclk = 66000000;
+
+       ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+       ibm4xx_sdram_fixup_memsize();
+       ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+       dt_fixup_mac_addresses(&bd.bi_enetaddr);
+}
+
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                  unsigned long r6, unsigned long r7)
+{
+       CUBOOT_INIT();
+
+       platform_ops.fixups = warp_fixups;
+       platform_ops.exit = ibm44x_dbcr_reset;
+       fdt_init(_dtb_start);
+       serial_console_init();
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dcr.h powerpc.git/arch/powerpc/boot/dcr.h
--- linux-2.6.24/arch/powerpc/boot/dcr.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dcr.h 2008-01-28 20:25:49.000000000 +0100
@@ -14,12 +14,20 @@
 #define DCRN_SDRAM0_CFGADDR                            0x010
 #define DCRN_SDRAM0_CFGDATA                            0x011
 
+#define SDRAM0_READ(offset) ({\
+       mtdcr(DCRN_SDRAM0_CFGADDR, offset); \
+       mfdcr(DCRN_SDRAM0_CFGDATA); })
+#define SDRAM0_WRITE(offset, data) ({\
+       mtdcr(DCRN_SDRAM0_CFGADDR, offset); \
+       mtdcr(DCRN_SDRAM0_CFGDATA, data); })
+
 #define        SDRAM0_B0CR                             0x40
 #define        SDRAM0_B1CR                             0x44
 #define        SDRAM0_B2CR                             0x48
 #define        SDRAM0_B3CR                             0x4c
 
-static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR };
+static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
+                                           SDRAM0_B2CR, SDRAM0_B3CR };
 
 #define                        SDRAM_CONFIG_BANK_ENABLE        0x00000001
 #define                        SDRAM_CONFIG_SIZE_MASK          0x000e0000
@@ -138,5 +146,54 @@
 #define DCRN_CPC0_PLLMR 0xb0
 #define DCRN_405_CPC0_CR0 0xb1
 #define DCRN_405_CPC0_CR1 0xb2
+#define DCRN_405_CPC0_PSR 0xb4
+
+/* 405EP Clocking/Power Management/Chip Control regs */
+#define DCRN_CPC0_PLLMR0  0xf0
+#define DCRN_CPC0_PLLMR1  0xf4
+#define DCRN_CPC0_UCR     0xf5
+
+/* 440GX Clock control etc */
+
+
+#define DCRN_CPR0_CLKUPD                               0x020
+#define DCRN_CPR0_PLLC                                 0x040
+#define DCRN_CPR0_PLLD                                 0x060
+#define DCRN_CPR0_PRIMAD                               0x080
+#define DCRN_CPR0_PRIMBD                               0x0a0
+#define DCRN_CPR0_OPBD                                 0x0c0
+#define DCRN_CPR0_PERD                                 0x0e0
+#define DCRN_CPR0_MALD                                 0x100
+
+#define DCRN_SDR0_CONFIG_ADDR  0xe
+#define DCRN_SDR0_CONFIG_DATA  0xf
+
+/* SDR read/write helper macros */
+#define SDR0_READ(offset) ({\
+       mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \
+       mfdcr(DCRN_SDR0_CONFIG_DATA); })
+#define SDR0_WRITE(offset, data) ({\
+       mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \
+       mtdcr(DCRN_SDR0_CONFIG_DATA, data); })
+
+#define DCRN_SDR0_UART0                0x0120
+#define DCRN_SDR0_UART1                0x0121
+#define DCRN_SDR0_UART2                0x0122
+#define DCRN_SDR0_UART3                0x0123
+
+
+/* CPRs read/write helper macros - based off include/asm-ppc/ibm44x.h */
+
+#define DCRN_CPR0_CFGADDR                              0xc
+#define DCRN_CPR0_CFGDATA                              0xd
+
+#define CPR0_READ(offset) ({\
+       mtdcr(DCRN_CPR0_CFGADDR, offset); \
+       mfdcr(DCRN_CPR0_CFGDATA); })
+#define CPR0_WRITE(offset, data) ({\
+       mtdcr(DCRN_CPR0_CFGADDR, offset); \
+       mtdcr(DCRN_CPR0_CFGDATA, data); })
+
+
 
 #endif /* _PPC_BOOT_DCR_H_ */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/devtree.c powerpc.git/arch/powerpc/boot/devtree.c
--- linux-2.6.24/arch/powerpc/boot/devtree.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/devtree.c     2008-01-28 20:25:49.000000000 +0100
@@ -88,6 +88,20 @@
        }
 }
 
+void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr)
+{
+       void *devp = find_node_by_alias(alias);
+
+       if (devp) {
+               printf("%s: local-mac-address <-"
+                      " %02x:%02x:%02x:%02x:%02x:%02x\n\r", alias,
+                      addr[0], addr[1], addr[2],
+                      addr[3], addr[4], addr[5]);
+
+               setprop(devp, "local-mac-address", addr, 6);
+       }
+}
+
 void dt_fixup_mac_address(u32 index, const u8 *addr)
 {
        void *devp = find_node_by_prop_value(NULL, "linux,network-index",
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/Makefile.dtc powerpc.git/arch/powerpc/boot/dtc-src/Makefile.dtc
--- linux-2.6.24/arch/powerpc/boot/dtc-src/Makefile.dtc 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/Makefile.dtc  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,25 @@
+# Makefile.dtc
+#
+# This is not a complete Makefile of itself.  Instead, it is designed to
+# be easily embeddable into other systems of Makefiles.
+#
+DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
+       checks.c
+DTC_EXTRA = dtc.h srcpos.h
+DTC_LEXFILES = dtc-lexer.l
+DTC_BISONFILES = dtc-parser.y
+
+DTC_LEX_SRCS = $(DTC_LEXFILES:%.l=%.lex.c)
+DTC_BISON_SRCS = $(DTC_BISONFILES:%.y=%.tab.c)
+DTC_BISON_INCLUDES = $(DTC_BISONFILES:%.y=%.tab.h)
+
+DTC_GEN_SRCS = $(DTC_LEX_SRCS) $(DTC_BISON_SRCS)
+DTC_GEN_ALL = $(DTC_GEN_SRCS) $(DTC_BISON_INCLUDES)
+DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
+
+DTC_CLEANFILES = $(DTC_GEN_ALL)
+
+# We assume the containing Makefile system can do auto-dependencies for most
+# things, but we supply the dependencies on generated header files explicitly
+
+$(addprefix $(DTC_objdir)/,$(DTC_GEN_SRCS:%.c=%.o)): $(addprefix $(DTC_objdir)/,$(DTC_BISON_INCLUDES))
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/checks.c powerpc.git/arch/powerpc/boot/dtc-src/checks.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/checks.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/checks.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,750 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2007.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+
+#ifdef TRACE_CHECKS
+#define TRACE(c, ...) \
+       do { \
+               fprintf(stderr, "=== %s: ", (c)->name); \
+               fprintf(stderr, __VA_ARGS__); \
+               fprintf(stderr, "\n"); \
+       } while (0)
+#else
+#define TRACE(c, fmt, ...)     do { } while (0)
+#endif
+
+enum checklevel {
+       IGNORE = 0,
+       WARN = 1,
+       ERROR = 2,
+};
+
+enum checkstatus {
+       UNCHECKED = 0,
+       PREREQ,
+       PASSED,
+       FAILED,
+};
+
+struct check;
+
+typedef void (*tree_check_fn)(struct check *c, struct node *dt);
+typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node);
+typedef void (*prop_check_fn)(struct check *c, struct node *dt,
+                             struct node *node, struct property *prop);
+
+struct check {
+       const char *name;
+       tree_check_fn tree_fn;
+       node_check_fn node_fn;
+       prop_check_fn prop_fn;
+       void *data;
+       enum checklevel level;
+       enum checkstatus status;
+       int inprogress;
+       int num_prereqs;
+       struct check **prereq;
+};
+
+#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \
+       static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \
+       static struct check nm = { \
+               .name = #nm, \
+               .tree_fn = (tfn), \
+               .node_fn = (nfn), \
+               .prop_fn = (pfn), \
+               .data = (d), \
+               .level = (lvl), \
+               .status = UNCHECKED, \
+               .num_prereqs = ARRAY_SIZE(nm##_prereqs), \
+               .prereq = nm##_prereqs, \
+       };
+
+#define TREE_CHECK(nm, d, lvl, ...) \
+       CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__)
+#define NODE_CHECK(nm, d, lvl, ...) \
+       CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__)
+#define PROP_CHECK(nm, d, lvl, ...) \
+       CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__)
+#define BATCH_CHECK(nm, lvl, ...) \
+       CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__)
+
+#ifdef __GNUC__
+static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
+#endif
+static inline void check_msg(struct check *c, const char *fmt, ...)
+{
+       va_list ap;
+       va_start(ap, fmt);
+
+       if ((c->level < WARN) || (c->level <= quiet))
+               return; /* Suppress message */
+
+       fprintf(stderr, "%s (%s): ",
+               (c->level == ERROR) ? "ERROR" : "Warning", c->name);
+       vfprintf(stderr, fmt, ap);
+       fprintf(stderr, "\n");
+}
+
+#define FAIL(c, ...) \
+       do { \
+               TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \
+               (c)->status = FAILED; \
+               check_msg((c), __VA_ARGS__); \
+       } while (0)
+
+static void check_nodes_props(struct check *c, struct node *dt, struct node *node)
+{
+       struct node *child;
+       struct property *prop;
+
+       TRACE(c, "%s", node->fullpath);
+       if (c->node_fn)
+               c->node_fn(c, dt, node);
+
+       if (c->prop_fn)
+               for_each_property(node, prop) {
+                       TRACE(c, "%s\t'%s'", node->fullpath, prop->name);
+                       c->prop_fn(c, dt, node, prop);
+               }
+
+       for_each_child(node, child)
+               check_nodes_props(c, dt, child);
+}
+
+static int run_check(struct check *c, struct node *dt)
+{
+       int error = 0;
+       int i;
+
+       assert(!c->inprogress);
+
+       if (c->status != UNCHECKED)
+               goto out;
+
+       c->inprogress = 1;
+
+       for (i = 0; i < c->num_prereqs; i++) {
+               struct check *prq = c->prereq[i];
+               error |= run_check(prq, dt);
+               if (prq->status != PASSED) {
+                       c->status = PREREQ;
+                       check_msg(c, "Failed prerequisite '%s'",
+                                 c->prereq[i]->name);
+               }
+       }
+
+       if (c->status != UNCHECKED)
+               goto out;
+
+       if (c->node_fn || c->prop_fn)
+               check_nodes_props(c, dt, dt);
+
+       if (c->tree_fn)
+               c->tree_fn(c, dt);
+       if (c->status == UNCHECKED)
+               c->status = PASSED;
+
+       TRACE(c, "\tCompleted, status %d", c->status);
+
+out:
+       c->inprogress = 0;
+       if ((c->status != PASSED) && (c->level == ERROR))
+               error = 1;
+       return error;
+}
+
+/*
+ * Utility check functions
+ */
+
+static void check_is_string(struct check *c, struct node *root,
+                           struct node *node)
+{
+       struct property *prop;
+       char *propname = c->data;
+
+       prop = get_property(node, propname);
+       if (!prop)
+               return; /* Not present, assumed ok */
+
+       if (!data_is_one_string(prop->val))
+               FAIL(c, "\"%s\" property in %s is not a string",
+                    propname, node->fullpath);
+}
+#define CHECK_IS_STRING(nm, propname, lvl) \
+       CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl))
+
+static void check_is_cell(struct check *c, struct node *root,
+                         struct node *node)
+{
+       struct property *prop;
+       char *propname = c->data;
+
+       prop = get_property(node, propname);
+       if (!prop)
+               return; /* Not present, assumed ok */
+
+       if (prop->val.len != sizeof(cell_t))
+               FAIL(c, "\"%s\" property in %s is not a single cell",
+                    propname, node->fullpath);
+}
+#define CHECK_IS_CELL(nm, propname, lvl) \
+       CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl))
+
+/*
+ * Structural check functions
+ */
+
+static void check_duplicate_node_names(struct check *c, struct node *dt,
+                                      struct node *node)
+{
+       struct node *child, *child2;
+
+       for_each_child(node, child)
+               for (child2 = child->next_sibling;
+                    child2;
+                    child2 = child2->next_sibling)
+                       if (streq(child->name, child2->name))
+                               FAIL(c, "Duplicate node name %s",
+                                    child->fullpath);
+}
+NODE_CHECK(duplicate_node_names, NULL, ERROR);
+
+static void check_duplicate_property_names(struct check *c, struct node *dt,
+                                          struct node *node)
+{
+       struct property *prop, *prop2;
+
+       for_each_property(node, prop)
+               for (prop2 = prop->next; prop2; prop2 = prop2->next)
+                       if (streq(prop->name, prop2->name))
+                               FAIL(c, "Duplicate property name %s in %s",
+                                    prop->name, node->fullpath);
+}
+NODE_CHECK(duplicate_property_names, NULL, ERROR);
+
+static void check_explicit_phandles(struct check *c, struct node *root,
+                                         struct node *node)
+{
+       struct property *prop;
+       struct node *other;
+       cell_t phandle;
+
+       prop = get_property(node, "linux,phandle");
+       if (! prop)
+               return; /* No phandle, that's fine */
+
+       if (prop->val.len != sizeof(cell_t)) {
+               FAIL(c, "%s has bad length (%d) linux,phandle property",
+                    node->fullpath, prop->val.len);
+               return;
+       }
+
+       phandle = propval_cell(prop);
+       if ((phandle == 0) || (phandle == -1)) {
+               FAIL(c, "%s has invalid linux,phandle value 0x%x",
+                    node->fullpath, phandle);
+               return;
+       }
+
+       other = get_node_by_phandle(root, phandle);
+       if (other) {
+               FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)",
+                    node->fullpath, phandle, other->fullpath);
+               return;
+       }
+
+       node->phandle = phandle;
+}
+NODE_CHECK(explicit_phandles, NULL, ERROR);
+
+static void check_name_properties(struct check *c, struct node *root,
+                                 struct node *node)
+{
+       struct property *prop;
+
+       prop = get_property(node, "name");
+       if (!prop)
+               return; /* No name property, that's fine */
+
+       if ((prop->val.len != node->basenamelen+1)
+           || (memcmp(prop->val.val, node->name, node->basenamelen) != 0))
+               FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
+                    " of base node name)", node->fullpath, prop->val.val);
+}
+CHECK_IS_STRING(name_is_string, "name", ERROR);
+NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
+
+/*
+ * Reference fixup functions
+ */
+
+static void fixup_phandle_references(struct check *c, struct node *dt,
+                                    struct node *node, struct property *prop)
+{
+      struct marker *m = prop->val.markers;
+      struct node *refnode;
+      cell_t phandle;
+
+      for_each_marker_of_type(m, REF_PHANDLE) {
+             assert(m->offset + sizeof(cell_t) <= prop->val.len);
+
+             refnode = get_node_by_ref(dt, m->ref);
+             if (! refnode) {
+                     FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+                          m->ref);
+                     continue;
+             }
+
+             phandle = get_node_phandle(dt, refnode);
+             *((cell_t *)(prop->val.val + m->offset)) = cpu_to_be32(phandle);
+      }
+}
+CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
+      &duplicate_node_names, &explicit_phandles);
+
+static void fixup_path_references(struct check *c, struct node *dt,
+                                 struct node *node, struct property *prop)
+{
+       struct marker *m = prop->val.markers;
+       struct node *refnode;
+       char *path;
+
+       for_each_marker_of_type(m, REF_PATH) {
+               assert(m->offset <= prop->val.len);
+
+               refnode = get_node_by_ref(dt, m->ref);
+               if (!refnode) {
+                       FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+                            m->ref);
+                       continue;
+               }
+
+               path = refnode->fullpath;
+               prop->val = data_insert_at_marker(prop->val, m, path,
+                                                 strlen(path) + 1);
+       }
+}
+CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR,
+      &duplicate_node_names);
+
+/*
+ * Semantic checks
+ */
+CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN);
+CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN);
+CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN);
+
+CHECK_IS_STRING(device_type_is_string, "device_type", WARN);
+CHECK_IS_STRING(model_is_string, "model", WARN);
+CHECK_IS_STRING(status_is_string, "status", WARN);
+
+static void fixup_addr_size_cells(struct check *c, struct node *dt,
+                                 struct node *node)
+{
+       struct property *prop;
+
+       node->addr_cells = -1;
+       node->size_cells = -1;
+
+       prop = get_property(node, "#address-cells");
+       if (prop)
+               node->addr_cells = propval_cell(prop);
+
+       prop = get_property(node, "#size-cells");
+       if (prop)
+               node->size_cells = propval_cell(prop);
+}
+CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN,
+      &address_cells_is_cell, &size_cells_is_cell);
+
+#define node_addr_cells(n) \
+       (((n)->addr_cells == -1) ? 2 : (n)->addr_cells)
+#define node_size_cells(n) \
+       (((n)->size_cells == -1) ? 1 : (n)->size_cells)
+
+static void check_reg_format(struct check *c, struct node *dt,
+                            struct node *node)
+{
+       struct property *prop;
+       int addr_cells, size_cells, entrylen;
+
+       prop = get_property(node, "reg");
+       if (!prop)
+               return; /* No "reg", that's fine */
+
+       if (!node->parent) {
+               FAIL(c, "Root node has a \"reg\" property");
+               return;
+       }
+
+       if (prop->val.len == 0)
+               FAIL(c, "\"reg\" property in %s is empty", node->fullpath);
+
+       addr_cells = node_addr_cells(node->parent);
+       size_cells = node_size_cells(node->parent);
+       entrylen = (addr_cells + size_cells) * sizeof(cell_t);
+
+       if ((prop->val.len % entrylen) != 0)
+               FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) "
+                    "(#address-cells == %d, #size-cells == %d)",
+                    node->fullpath, prop->val.len, addr_cells, size_cells);
+}
+NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells);
+
+static void check_ranges_format(struct check *c, struct node *dt,
+                               struct node *node)
+{
+       struct property *prop;
+       int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen;
+
+       prop = get_property(node, "ranges");
+       if (!prop)
+               return;
+
+       if (!node->parent) {
+               FAIL(c, "Root node has a \"ranges\" property");
+               return;
+       }
+
+       p_addr_cells = node_addr_cells(node->parent);
+       p_size_cells = node_size_cells(node->parent);
+       c_addr_cells = node_addr_cells(node);
+       c_size_cells = node_size_cells(node);
+       entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t);
+
+       if (prop->val.len == 0) {
+               if (p_addr_cells != c_addr_cells)
+                       FAIL(c, "%s has empty \"ranges\" property but its "
+                            "#address-cells (%d) differs from %s (%d)",
+                            node->fullpath, c_addr_cells, node->parent->fullpath,
+                            p_addr_cells);
+               if (p_size_cells != c_size_cells)
+                       FAIL(c, "%s has empty \"ranges\" property but its "
+                            "#size-cells (%d) differs from %s (%d)",
+                            node->fullpath, c_size_cells, node->parent->fullpath,
+                            p_size_cells);
+       } else if ((prop->val.len % entrylen) != 0) {
+               FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) "
+                    "(parent #address-cells == %d, child #address-cells == %d, "
+                    "#size-cells == %d)", node->fullpath, prop->val.len,
+                    p_addr_cells, c_addr_cells, c_size_cells);
+       }
+}
+NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells);
+
+/*
+ * Style checks
+ */
+static void check_avoid_default_addr_size(struct check *c, struct node *dt,
+                                         struct node *node)
+{
+       struct property *reg, *ranges;
+
+       if (!node->parent)
+               return; /* Ignore root node */
+
+       reg = get_property(node, "reg");
+       ranges = get_property(node, "ranges");
+
+       if (!reg && !ranges)
+               return;
+
+       if ((node->parent->addr_cells == -1))
+               FAIL(c, "Relying on default #address-cells value for %s",
+                    node->fullpath);
+
+       if ((node->parent->size_cells == -1))
+               FAIL(c, "Relying on default #size-cells value for %s",
+                    node->fullpath);
+}
+NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells);
+
+static void check_obsolete_chosen_interrupt_controller(struct check *c,
+                                                      struct node *dt)
+{
+       struct node *chosen;
+       struct property *prop;
+
+       chosen = get_node_by_path(dt, "/chosen");
+       if (!chosen)
+               return;
+
+       prop = get_property(chosen, "interrupt-controller");
+       if (prop)
+               FAIL(c, "/chosen has obsolete \"interrupt-controller\" "
+                    "property");
+}
+TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN);
+
+static struct check *check_table[] = {
+       &duplicate_node_names, &duplicate_property_names,
+       &name_is_string, &name_properties,
+       &explicit_phandles,
+       &phandle_references, &path_references,
+
+       &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell,
+       &device_type_is_string, &model_is_string, &status_is_string,
+
+       &addr_size_cells, &reg_format, &ranges_format,
+
+       &avoid_default_addr_size,
+       &obsolete_chosen_interrupt_controller,
+};
+
+int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys);
+
+void process_checks(int force, struct boot_info *bi,
+                   int checkflag, int outversion, int boot_cpuid_phys)
+{
+       struct node *dt = bi->dt;
+       int i;
+       int error = 0;
+
+       for (i = 0; i < ARRAY_SIZE(check_table); i++) {
+               struct check *c = check_table[i];
+
+               if (c->level != IGNORE)
+                       error = error || run_check(c, dt);
+       }
+
+       if (error) {
+               if (!force) {
+                       fprintf(stderr, "ERROR: Input tree has errors, aborting "
+                               "(use -f to force output)\n");
+                       exit(2);
+               } else if (quiet < 3) {
+                       fprintf(stderr, "Warning: Input tree has errors, "
+                               "output forced\n");
+               }
+       }
+
+       if (checkflag) {
+               if (error) {
+                       fprintf(stderr, "Warning: Skipping semantic checks due to structural errors\n");
+               } else {
+                       if (!check_semantics(bi->dt, outversion,
+                                            boot_cpuid_phys))
+                               fprintf(stderr, "Warning: Input tree has semantic errors\n");
+               }
+       }
+}
+
+/*
+ * Semantic check functions
+ */
+
+#define ERRMSG(...) if (quiet < 2) fprintf(stderr, "ERROR: " __VA_ARGS__)
+#define WARNMSG(...) if (quiet < 1) fprintf(stderr, "Warning: " __VA_ARGS__)
+
+#define DO_ERR(...) do {ERRMSG(__VA_ARGS__); ok = 0; } while (0)
+
+#define CHECK_HAVE(node, propname) \
+       do { \
+               if (! (prop = get_property((node), (propname)))) \
+                       DO_ERR("Missing \"%s\" property in %s\n", (propname), \
+                               (node)->fullpath); \
+       } while (0);
+
+#define CHECK_HAVE_WARN(node, propname) \
+       do { \
+               if (! (prop  = get_property((node), (propname)))) \
+                       WARNMSG("%s has no \"%s\" property\n", \
+                               (node)->fullpath, (propname)); \
+       } while (0)
+
+#define CHECK_HAVE_STRING(node, propname) \
+       do { \
+               CHECK_HAVE((node), (propname)); \
+               if (prop && !data_is_one_string(prop->val)) \
+                       DO_ERR("\"%s\" property in %s is not a string\n", \
+                               (propname), (node)->fullpath); \
+       } while (0)
+
+#define CHECK_HAVE_STREQ(node, propname, value) \
+       do { \
+               CHECK_HAVE_STRING((node), (propname)); \
+               if (prop && !streq(prop->val.val, (value))) \
+                       DO_ERR("%s has wrong %s, %s (should be %s\n", \
+                               (node)->fullpath, (propname), \
+                               prop->val.val, (value)); \
+       } while (0)
+
+#define CHECK_HAVE_ONECELL(node, propname) \
+       do { \
+               CHECK_HAVE((node), (propname)); \
+               if (prop && (prop->val.len != sizeof(cell_t))) \
+                       DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \
+       } while (0)
+
+#define CHECK_HAVE_WARN_ONECELL(node, propname) \
+       do { \
+               CHECK_HAVE_WARN((node), (propname)); \
+               if (prop && (prop->val.len != sizeof(cell_t))) \
+                       DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \
+       } while (0)
+
+#define CHECK_HAVE_WARN_PHANDLE(xnode, propname, root) \
+       do { \
+               struct node *ref; \
+               CHECK_HAVE_WARN_ONECELL((xnode), (propname)); \
+               if (prop) {\
+                       cell_t phandle = propval_cell(prop); \
+                       if ((phandle == 0) || (phandle == -1)) { \
+                               DO_ERR("\"%s\" property in %s contains an invalid phandle %x\n", (propname), (xnode)->fullpath, phandle); \
+                       } else { \
+                               ref = get_node_by_phandle((root), propval_cell(prop)); \
+                               if (! ref) \
+                                       DO_ERR("\"%s\" property in %s refers to non-existant phandle %x\n", (propname), (xnode)->fullpath, propval_cell(prop)); \
+                       } \
+               } \
+       } while (0)
+
+#define CHECK_HAVE_WARN_STRING(node, propname) \
+       do { \
+               CHECK_HAVE_WARN((node), (propname)); \
+               if (prop && !data_is_one_string(prop->val)) \
+                       DO_ERR("\"%s\" property in %s is not a string\n", \
+                               (propname), (node)->fullpath); \
+       } while (0)
+
+static int check_root(struct node *root)
+{
+       struct property *prop;
+       int ok = 1;
+
+       CHECK_HAVE_STRING(root, "model");
+       CHECK_HAVE_WARN(root, "compatible");
+
+       return ok;
+}
+
+static int check_cpus(struct node *root, int outversion, int boot_cpuid_phys)
+{
+       struct node *cpus, *cpu;
+       struct property *prop;
+       struct node *bootcpu = NULL;
+       int ok = 1;
+
+       cpus = get_subnode(root, "cpus");
+       if (! cpus) {
+               ERRMSG("Missing /cpus node\n");
+               return 0;
+       }
+
+       if (cpus->addr_cells != 1)
+               DO_ERR("%s has bad #address-cells value %d (should be 1)\n",
+                      cpus->fullpath, cpus->addr_cells);
+       if (cpus->size_cells != 0)
+               DO_ERR("%s has bad #size-cells value %d (should be 0)\n",
+                      cpus->fullpath, cpus->size_cells);
+
+       for_each_child(cpus, cpu) {
+               CHECK_HAVE_STREQ(cpu, "device_type", "cpu");
+
+               CHECK_HAVE_ONECELL(cpu, "reg");
+               if (prop) {
+                       cell_t unitnum;
+                       char *eptr;
+
+                       unitnum = strtol(get_unitname(cpu), &eptr, 16);
+                       if (*eptr) {
+                               WARNMSG("%s has bad format unit name %s (should be CPU number\n",
+                                       cpu->fullpath, get_unitname(cpu));
+                       } else if (unitnum != propval_cell(prop)) {
+                               WARNMSG("%s unit name \"%s\" does not match \"reg\" property <%x>\n",
+                                      cpu->fullpath, get_unitname(cpu),
+                                      propval_cell(prop));
+                       }
+               }
+
+/*             CHECK_HAVE_ONECELL(cpu, "d-cache-line-size"); */
+/*             CHECK_HAVE_ONECELL(cpu, "i-cache-line-size"); */
+               CHECK_HAVE_ONECELL(cpu, "d-cache-size");
+               CHECK_HAVE_ONECELL(cpu, "i-cache-size");
+
+               CHECK_HAVE_WARN_ONECELL(cpu, "clock-frequency");
+               CHECK_HAVE_WARN_ONECELL(cpu, "timebase-frequency");
+
+               prop = get_property(cpu, "linux,boot-cpu");
+               if (prop) {
+                       if (prop->val.len)
+                               WARNMSG("\"linux,boot-cpu\" property in %s is non-empty\n",
+                                       cpu->fullpath);
+                       if (bootcpu)
+                               DO_ERR("Multiple boot cpus (%s and %s)\n",
+                                      bootcpu->fullpath, cpu->fullpath);
+                       else
+                               bootcpu = cpu;
+               }
+       }
+
+       if (outversion < 2) {
+               if (! bootcpu)
+                       WARNMSG("No cpu has \"linux,boot-cpu\" property\n");
+       } else {
+               if (bootcpu)
+                       WARNMSG("\"linux,boot-cpu\" property is deprecated in blob version 2 or higher\n");
+               if (boot_cpuid_phys == 0xfeedbeef)
+                       WARNMSG("physical boot CPU not set.  Use -b option to set\n");
+       }
+
+       return ok;
+}
+
+static int check_memory(struct node *root)
+{
+       struct node *mem;
+       struct property *prop;
+       int nnodes = 0;
+       int ok = 1;
+
+       for_each_child(root, mem) {
+               if (! strneq(mem->name, "memory", mem->basenamelen))
+                       continue;
+
+               nnodes++;
+
+               CHECK_HAVE_STREQ(mem, "device_type", "memory");
+               CHECK_HAVE(mem, "reg");
+       }
+
+       if (nnodes == 0) {
+               ERRMSG("No memory nodes\n");
+               return 0;
+       }
+
+       return ok;
+}
+
+int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys)
+{
+       int ok = 1;
+
+       ok = ok && check_root(dt);
+       ok = ok && check_cpus(dt, outversion, boot_cpuid_phys);
+       ok = ok && check_memory(dt);
+       if (! ok)
+               return 0;
+
+       return 1;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/data.c powerpc.git/arch/powerpc/boot/dtc-src/data.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/data.c       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/data.c        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,321 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+
+void data_free(struct data d)
+{
+       struct marker *m, *nm;
+
+       m = d.markers;
+       while (m) {
+               nm = m->next;
+               free(m->ref);
+               free(m);
+               m = nm;
+       }
+
+       assert(!d.val || d.asize);
+
+       if (d.val)
+               free(d.val);
+}
+
+struct data data_grow_for(struct data d, int xlen)
+{
+       struct data nd;
+       int newsize;
+
+       /* we must start with an allocated datum */
+       assert(!d.val || d.asize);
+
+       if (xlen == 0)
+               return d;
+
+       nd = d;
+
+       newsize = xlen;
+
+       while ((d.len + xlen) > newsize)
+               newsize *= 2;
+
+       nd.asize = newsize;
+       nd.val = xrealloc(d.val, newsize);
+
+       assert(nd.asize >= (d.len + xlen));
+
+       return nd;
+}
+
+struct data data_copy_mem(const char *mem, int len)
+{
+       struct data d;
+
+       d = data_grow_for(empty_data, len);
+
+       d.len = len;
+       memcpy(d.val, mem, len);
+
+       return d;
+}
+
+static char get_oct_char(const char *s, int *i)
+{
+       char x[4];
+       char *endx;
+       long val;
+
+       x[3] = '\0';
+       x[0] = s[(*i)];
+       if (x[0]) {
+               x[1] = s[(*i)+1];
+               if (x[1])
+                       x[2] = s[(*i)+2];
+       }
+
+       val = strtol(x, &endx, 8);
+       if ((endx - x) == 0)
+               fprintf(stderr, "Empty \\nnn escape\n");
+
+       (*i) += endx - x;
+       return val;
+}
+
+static char get_hex_char(const char *s, int *i)
+{
+       char x[3];
+       char *endx;
+       long val;
+
+       x[2] = '\0';
+       x[0] = s[(*i)];
+       if (x[0])
+               x[1] = s[(*i)+1];
+
+       val = strtol(x, &endx, 16);
+       if ((endx - x) == 0)
+               fprintf(stderr, "Empty \\x escape\n");
+
+       (*i) += endx - x;
+       return val;
+}
+
+struct data data_copy_escape_string(const char *s, int len)
+{
+       int i = 0;
+       struct data d;
+       char *q;
+
+       d = data_grow_for(empty_data, strlen(s)+1);
+
+       q = d.val;
+       while (i < len) {
+               char c = s[i++];
+
+               if (c != '\\') {
+                       q[d.len++] = c;
+                       continue;
+               }
+
+               c = s[i++];
+               assert(c);
+               switch (c) {
+               case 'a':
+                       q[d.len++] = '\a';
+                       break;
+               case 'b':
+                       q[d.len++] = '\b';
+                       break;
+               case 't':
+                       q[d.len++] = '\t';
+                       break;
+               case 'n':
+                       q[d.len++] = '\n';
+                       break;
+               case 'v':
+                       q[d.len++] = '\v';
+                       break;
+               case 'f':
+                       q[d.len++] = '\f';
+                       break;
+               case 'r':
+                       q[d.len++] = '\r';
+                       break;
+               case '0':
+               case '1':
+               case '2':
+               case '3':
+               case '4':
+               case '5':
+               case '6':
+               case '7':
+                       i--; /* need to re-read the first digit as
+                             * part of the octal value */
+                       q[d.len++] = get_oct_char(s, &i);
+                       break;
+               case 'x':
+                       q[d.len++] = get_hex_char(s, &i);
+                       break;
+               default:
+                       q[d.len++] = c;
+               }
+       }
+
+       q[d.len++] = '\0';
+       return d;
+}
+
+struct data data_copy_file(FILE *f, size_t len)
+{
+       struct data d;
+
+       d = data_grow_for(empty_data, len);
+
+       d.len = len;
+       fread(d.val, len, 1, f);
+
+       return d;
+}
+
+struct data data_append_data(struct data d, const void *p, int len)
+{
+       d = data_grow_for(d, len);
+       memcpy(d.val + d.len, p, len);
+       d.len += len;
+       return d;
+}
+
+struct data data_insert_at_marker(struct data d, struct marker *m,
+                                 const void *p, int len)
+{
+       d = data_grow_for(d, len);
+       memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset);
+       memcpy(d.val + m->offset, p, len);
+       d.len += len;
+
+       /* Adjust all markers after the one we're inserting at */
+       m = m->next;
+       for_each_marker(m)
+               m->offset += len;
+       return d;
+}
+
+struct data data_append_markers(struct data d, struct marker *m)
+{
+       struct marker **mp = &d.markers;
+
+       /* Find the end of the markerlist */
+       while (*mp)
+               mp = &((*mp)->next);
+       *mp = m;
+       return d;
+}
+
+struct data data_merge(struct data d1, struct data d2)
+{
+       struct data d;
+       struct marker *m2 = d2.markers;
+
+       d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2);
+
+       /* Adjust for the length of d1 */
+       for_each_marker(m2)
+               m2->offset += d1.len;
+
+       d2.markers = NULL; /* So data_free() doesn't clobber them */
+       data_free(d2);
+
+       return d;
+}
+
+struct data data_append_cell(struct data d, cell_t word)
+{
+       cell_t beword = cpu_to_be32(word);
+
+       return data_append_data(d, &beword, sizeof(beword));
+}
+
+struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
+{
+       struct fdt_reserve_entry bere;
+
+       bere.address = cpu_to_be64(re->address);
+       bere.size = cpu_to_be64(re->size);
+
+       return data_append_data(d, &bere, sizeof(bere));
+}
+
+struct data data_append_addr(struct data d, u64 addr)
+{
+       u64 beaddr = cpu_to_be64(addr);
+
+       return data_append_data(d, &beaddr, sizeof(beaddr));
+}
+
+struct data data_append_byte(struct data d, uint8_t byte)
+{
+       return data_append_data(d, &byte, 1);
+}
+
+struct data data_append_zeroes(struct data d, int len)
+{
+       d = data_grow_for(d, len);
+
+       memset(d.val + d.len, 0, len);
+       d.len += len;
+       return d;
+}
+
+struct data data_append_align(struct data d, int align)
+{
+       int newlen = ALIGN(d.len, align);
+       return data_append_zeroes(d, newlen - d.len);
+}
+
+struct data data_add_marker(struct data d, enum markertype type, char *ref)
+{
+       struct marker *m;
+
+       m = xmalloc(sizeof(*m));
+       m->offset = d.len;
+       m->type = type;
+       m->ref = ref;
+       m->next = NULL;
+
+       return data_append_markers(d, m);
+}
+
+int data_is_one_string(struct data d)
+{
+       int i;
+       int len = d.len;
+
+       if (len == 0)
+               return 0;
+
+       for (i = 0; i < len-1; i++)
+               if (d.val[i] == '\0')
+                       return 0;
+
+       if (d.val[len-1] != '\0')
+               return 0;
+
+       return 1;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-lexer.l powerpc.git/arch/powerpc/boot/dtc-src/dtc-lexer.l
--- linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-lexer.l  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/dtc-lexer.l   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,328 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+%option noyywrap nounput yylineno
+
+%x INCLUDE
+%x BYTESTRING
+%x PROPNODENAME
+%s V1
+
+PROPNODECHAR   [a-zA-Z0-9,._+*#?@-]
+PATHCHAR       ({PROPNODECHAR}|[/])
+LABEL          [a-zA-Z_][a-zA-Z0-9_]*
+
+%{
+#include "dtc.h"
+#include "srcpos.h"
+#include "dtc-parser.tab.h"
+
+
+/*#define LEXDEBUG     1*/
+
+#ifdef LEXDEBUG
+#define DPRINT(fmt, ...)       fprintf(stderr, fmt, ##__VA_ARGS__)
+#else
+#define DPRINT(fmt, ...)       do { } while (0)
+#endif
+
+static int dts_version; /* = 0 */
+
+#define BEGIN_DEFAULT()        if (dts_version == 0) { \
+                               DPRINT("<INITIAL>\n"); \
+                               BEGIN(INITIAL); \
+                       } else { \
+                               DPRINT("<V1>\n"); \
+                               BEGIN(V1); \
+                       }
+%}
+
+%%
+<*>"/include/"         BEGIN(INCLUDE);
+
+<INCLUDE>\"[^"\n]*\"   {
+                       yytext[strlen(yytext) - 1] = 0;
+                       if (!push_input_file(yytext + 1)) {
+                               /* Some unrecoverable error.*/
+                               exit(1);
+                       }
+                       BEGIN_DEFAULT();
+               }
+
+
+<*><<EOF>>             {
+                       if (!pop_input_file()) {
+                               yyterminate();
+                       }
+               }
+
+<*>\"([^\\"]|\\.)*\"   {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("String: %s\n", yytext);
+                       yylval.data = data_copy_escape_string(yytext+1,
+                                       yyleng-2);
+                       yylloc.first_line = yylineno;
+                       return DT_STRING;
+               }
+
+<*>"/dts-v1/"  {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Keyword: /dts-v1/\n");
+                       dts_version = 1;
+                       BEGIN_DEFAULT();
+                       return DT_V1;
+               }
+
+<*>"/memreserve/"      {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Keyword: /memreserve/\n");
+                       BEGIN_DEFAULT();
+                       return DT_MEMRESERVE;
+               }
+
+<*>{LABEL}:    {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Label: %s\n", yytext);
+                       yylval.labelref = strdup(yytext);
+                       yylval.labelref[yyleng-1] = '\0';
+                       return DT_LABEL;
+               }
+
+<INITIAL>[bodh]# {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       if (*yytext == 'b')
+                               yylval.cbase = 2;
+                       else if (*yytext == 'o')
+                               yylval.cbase = 8;
+                       else if (*yytext == 'd')
+                               yylval.cbase = 10;
+                       else
+                               yylval.cbase = 16;
+                       DPRINT("Base: %d\n", yylval.cbase);
+                       return DT_BASE;
+               }
+
+<INITIAL>[0-9a-fA-F]+  {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yylval.literal = strdup(yytext);
+                       DPRINT("Literal: '%s'\n", yylval.literal);
+                       return DT_LEGACYLITERAL;
+               }
+
+<V1>[0-9]+|0[xX][0-9a-fA-F]+      {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yylval.literal = strdup(yytext);
+                       DPRINT("Literal: '%s'\n", yylval.literal);
+                       return DT_LITERAL;
+               }
+
+\&{LABEL}      {       /* label reference */
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Ref: %s\n", yytext+1);
+                       yylval.labelref = strdup(yytext+1);
+                       return DT_REF;
+               }
+
+"&{/"{PATHCHAR}+\}     {       /* new-style path reference */
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yytext[yyleng-1] = '\0';
+                       DPRINT("Ref: %s\n", yytext+2);
+                       yylval.labelref = strdup(yytext+2);
+                       return DT_REF;
+               }
+
+<INITIAL>"&/"{PATHCHAR}+ {     /* old-style path reference */
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Ref: %s\n", yytext+1);
+                       yylval.labelref = strdup(yytext+1);
+                       return DT_REF;
+               }
+
+<BYTESTRING>[0-9a-fA-F]{2} {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yylval.byte = strtol(yytext, NULL, 16);
+                       DPRINT("Byte: %02x\n", (int)yylval.byte);
+                       return DT_BYTE;
+               }
+
+<BYTESTRING>"]"        {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("/BYTESTRING\n");
+                       BEGIN_DEFAULT();
+                       return ']';
+               }
+
+<PROPNODENAME>{PROPNODECHAR}+ {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("PropNodeName: %s\n", yytext);
+                       yylval.propnodename = strdup(yytext);
+                       BEGIN_DEFAULT();
+                       return DT_PROPNODENAME;
+               }
+
+
+<*>[[:space:]]+        /* eat whitespace */
+
+<*>"/*"([^*]|\*+[^*/])*\*+"/"  {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Comment: %s\n", yytext);
+                       /* eat comments */
+               }
+
+<*>"//".*\n    /* eat line comments */
+
+<*>.           {
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Char: %c (\\x%02x)\n", yytext[0],
+                               (unsigned)yytext[0]);
+                       if (yytext[0] == '[') {
+                               DPRINT("<BYTESTRING>\n");
+                               BEGIN(BYTESTRING);
+                       }
+                       if ((yytext[0] == '{')
+                           || (yytext[0] == ';')) {
+                               DPRINT("<PROPNODENAME>\n");
+                               BEGIN(PROPNODENAME);
+                       }
+                       return yytext[0];
+               }
+
+%%
+
+
+/*
+ * Stack of nested include file contexts.
+ */
+
+struct incl_file {
+       int filenum;
+       FILE *file;
+       YY_BUFFER_STATE yy_prev_buf;
+       int yy_prev_lineno;
+       struct incl_file *prev;
+};
+
+struct incl_file *incl_file_stack;
+
+
+/*
+ * Detect infinite include recursion.
+ */
+#define MAX_INCLUDE_DEPTH      (100)
+
+static int incl_depth = 0;
+
+
+int push_input_file(const char *filename)
+{
+       FILE *f;
+       struct incl_file *incl_file;
+
+       if (!filename) {
+               yyerror("No include file name given.");
+               return 0;
+       }
+
+       if (incl_depth++ >= MAX_INCLUDE_DEPTH) {
+               yyerror("Includes nested too deeply");
+               return 0;
+       }
+
+       f = dtc_open_file(filename);
+
+       incl_file = malloc(sizeof(struct incl_file));
+       if (!incl_file) {
+               yyerror("Can not allocate include file space.");
+               return 0;
+       }
+
+       /*
+        * Save current context.
+        */
+       incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
+       incl_file->yy_prev_lineno = yylineno;
+       incl_file->filenum = srcpos_filenum;
+       incl_file->file = yyin;
+       incl_file->prev = incl_file_stack;
+
+       incl_file_stack = incl_file;
+
+       /*
+        * Establish new context.
+        */
+       srcpos_filenum = lookup_file_name(filename, 0);
+       yylineno = 1;
+       yyin = f;
+       yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
+
+       return 1;
+}
+
+
+int pop_input_file(void)
+{
+       struct incl_file *incl_file;
+
+       if (incl_file_stack == 0)
+               return 0;
+
+       fclose(yyin);
+
+       /*
+        * Pop.
+        */
+       --incl_depth;
+       incl_file = incl_file_stack;
+       incl_file_stack = incl_file->prev;
+
+       /*
+        * Recover old context.
+        */
+       yy_delete_buffer(YY_CURRENT_BUFFER);
+       yy_switch_to_buffer(incl_file->yy_prev_buf);
+       yylineno = incl_file->yy_prev_lineno;
+       srcpos_filenum = incl_file->filenum;
+       yyin = incl_file->file;
+
+       /*
+        * Free old state.
+        */
+       free(incl_file);
+
+       if (YY_CURRENT_BUFFER == 0)
+               return 0;
+
+       return 1;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped powerpc.git/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
--- linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,2174 @@
+#line 2 "dtc-lexer.lex.c"
+
+#line 4 "dtc-lexer.lex.c"
+
+#define  YY_INT_ALIGNED short int
+
+/* A lexical scanner generated by flex */
+
+#define FLEX_SCANNER
+#define YY_FLEX_MAJOR_VERSION 2
+#define YY_FLEX_MINOR_VERSION 5
+#define YY_FLEX_SUBMINOR_VERSION 33
+#if YY_FLEX_SUBMINOR_VERSION > 0
+#define FLEX_BETA
+#endif
+
+/* First, we deal with  platform-specific or compiler-specific issues. */
+
+/* begin standard C headers. */
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+
+/* end standard C headers. */
+
+/* flex integer type definitions */
+
+#ifndef FLEXINT_H
+#define FLEXINT_H
+
+/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
+
+#if __STDC_VERSION__ >= 199901L
+
+/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
+ * if you want the limit (max/min) macros for int types. 
+ */
+#ifndef __STDC_LIMIT_MACROS
+#define __STDC_LIMIT_MACROS 1
+#endif
+
+#include <inttypes.h>
+typedef int8_t flex_int8_t;
+typedef uint8_t flex_uint8_t;
+typedef int16_t flex_int16_t;
+typedef uint16_t flex_uint16_t;
+typedef int32_t flex_int32_t;
+typedef uint32_t flex_uint32_t;
+#else
+typedef signed char flex_int8_t;
+typedef short int flex_int16_t;
+typedef int flex_int32_t;
+typedef unsigned char flex_uint8_t; 
+typedef unsigned short int flex_uint16_t;
+typedef unsigned int flex_uint32_t;
+#endif /* ! C99 */
+
+/* Limits of integral types. */
+#ifndef INT8_MIN
+#define INT8_MIN               (-128)
+#endif
+#ifndef INT16_MIN
+#define INT16_MIN              (-32767-1)
+#endif
+#ifndef INT32_MIN
+#define INT32_MIN              (-2147483647-1)
+#endif
+#ifndef INT8_MAX
+#define INT8_MAX               (127)
+#endif
+#ifndef INT16_MAX
+#define INT16_MAX              (32767)
+#endif
+#ifndef INT32_MAX
+#define INT32_MAX              (2147483647)
+#endif
+#ifndef UINT8_MAX
+#define UINT8_MAX              (255U)
+#endif
+#ifndef UINT16_MAX
+#define UINT16_MAX             (65535U)
+#endif
+#ifndef UINT32_MAX
+#define UINT32_MAX             (4294967295U)
+#endif
+
+#endif /* ! FLEXINT_H */
+
+#ifdef __cplusplus
+
+/* The "const" storage-class-modifier is valid. */
+#define YY_USE_CONST
+
+#else  /* ! __cplusplus */
+
+#if __STDC__
+
+#define YY_USE_CONST
+
+#endif /* __STDC__ */
+#endif /* ! __cplusplus */
+
+#ifdef YY_USE_CONST
+#define yyconst const
+#else
+#define yyconst
+#endif
+
+/* Returned upon end-of-file. */
+#define YY_NULL 0
+
+/* Promotes a possibly negative, possibly signed char to an unsigned
+ * integer for use as an array index.  If the signed char is negative,
+ * we want to instead treat it as an 8-bit unsigned char, hence the
+ * double cast.
+ */
+#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
+
+/* Enter a start condition.  This macro really ought to take a parameter,
+ * but we do it the disgusting crufty way forced on us by the ()-less
+ * definition of BEGIN.
+ */
+#define BEGIN (yy_start) = 1 + 2 *
+
+/* Translate the current start state into a value that can be later handed
+ * to BEGIN to return to the state.  The YYSTATE alias is for lex
+ * compatibility.
+ */
+#define YY_START (((yy_start) - 1) / 2)
+#define YYSTATE YY_START
+
+/* Action number for EOF rule of a given start state. */
+#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
+
+/* Special action meaning "start processing a new file". */
+#define YY_NEW_FILE yyrestart(yyin  )
+
+#define YY_END_OF_BUFFER_CHAR 0
+
+/* Size of default input buffer. */
+#ifndef YY_BUF_SIZE
+#define YY_BUF_SIZE 16384
+#endif
+
+/* The state buf must be large enough to hold one state per character in the main buffer.
+ */
+#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
+
+#ifndef YY_TYPEDEF_YY_BUFFER_STATE
+#define YY_TYPEDEF_YY_BUFFER_STATE
+typedef struct yy_buffer_state *YY_BUFFER_STATE;
+#endif
+
+extern int yyleng;
+
+extern FILE *yyin, *yyout;
+
+#define EOB_ACT_CONTINUE_SCAN 0
+#define EOB_ACT_END_OF_FILE 1
+#define EOB_ACT_LAST_MATCH 2
+
+    /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
+     *       access to the local variable yy_act. Since yyless() is a macro, it would break
+     *       existing scanners that call yyless() from OUTSIDE yylex. 
+     *       One obvious solution it to make yy_act a global. I tried that, and saw
+     *       a 5% performance hit in a non-yylineno scanner, because yy_act is
+     *       normally declared as a register variable-- so it is not worth it.
+     */
+    #define  YY_LESS_LINENO(n) \
+            do { \
+                int yyl;\
+                for ( yyl = n; yyl < yyleng; ++yyl )\
+                    if ( yytext[yyl] == '\n' )\
+                        --yylineno;\
+            }while(0)
+    
+/* Return all but the first "n" matched characters back to the input stream. */
+#define yyless(n) \
+       do \
+               { \
+               /* Undo effects of setting up yytext. */ \
+        int yyless_macro_arg = (n); \
+        YY_LESS_LINENO(yyless_macro_arg);\
+               *yy_cp = (yy_hold_char); \
+               YY_RESTORE_YY_MORE_OFFSET \
+               (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+               YY_DO_BEFORE_ACTION; /* set up yytext again */ \
+               } \
+       while ( 0 )
+
+#define unput(c) yyunput( c, (yytext_ptr)  )
+
+/* The following is because we cannot portably get our hands on size_t
+ * (without autoconf's help, which isn't available because we want
+ * flex-generated scanners to compile on their own).
+ */
+
+#ifndef YY_TYPEDEF_YY_SIZE_T
+#define YY_TYPEDEF_YY_SIZE_T
+typedef unsigned int yy_size_t;
+#endif
+
+#ifndef YY_STRUCT_YY_BUFFER_STATE
+#define YY_STRUCT_YY_BUFFER_STATE
+struct yy_buffer_state
+       {
+       FILE *yy_input_file;
+
+       char *yy_ch_buf;                /* input buffer */
+       char *yy_buf_pos;               /* current position in input buffer */
+
+       /* Size of input buffer in bytes, not including room for EOB
+        * characters.
+        */
+       yy_size_t yy_buf_size;
+
+       /* Number of characters read into yy_ch_buf, not including EOB
+        * characters.
+        */
+       int yy_n_chars;
+
+       /* Whether we "own" the buffer - i.e., we know we created it,
+        * and can realloc() it to grow it, and should free() it to
+        * delete it.
+        */
+       int yy_is_our_buffer;
+
+       /* Whether this is an "interactive" input source; if so, and
+        * if we're using stdio for input, then we want to use getc()
+        * instead of fread(), to make sure we stop fetching input after
+        * each newline.
+        */
+       int yy_is_interactive;
+
+       /* Whether we're considered to be at the beginning of a line.
+        * If so, '^' rules will be active on the next match, otherwise
+        * not.
+        */
+       int yy_at_bol;
+
+    int yy_bs_lineno; /**< The line count. */
+    int yy_bs_column; /**< The column count. */
+    
+       /* Whether to try to fill the input buffer when we reach the
+        * end of it.
+        */
+       int yy_fill_buffer;
+
+       int yy_buffer_status;
+
+#define YY_BUFFER_NEW 0
+#define YY_BUFFER_NORMAL 1
+       /* When an EOF's been seen but there's still some text to process
+        * then we mark the buffer as YY_EOF_PENDING, to indicate that we
+        * shouldn't try reading from the input source any more.  We might
+        * still have a bunch of tokens to match, though, because of
+        * possible backing-up.
+        *
+        * When we actually see the EOF, we change the status to "new"
+        * (via yyrestart()), so that the user can continue scanning by
+        * just pointing yyin at a new input file.
+        */
+#define YY_BUFFER_EOF_PENDING 2
+
+       };
+#endif /* !YY_STRUCT_YY_BUFFER_STATE */
+
+/* Stack of input buffers. */
+static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
+static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
+static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
+
+/* We provide macros for accessing buffer states in case in the
+ * future we want to put the buffer states in a more general
+ * "scanner state".
+ *
+ * Returns the top of the stack, or NULL.
+ */
+#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
+                          ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
+                          : NULL)
+
+/* Same as previous macro, but useful when we know that the buffer stack is not
+ * NULL or when we need an lvalue. For internal use only.
+ */
+#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
+
+/* yy_hold_char holds the character lost when yytext is formed. */
+static char yy_hold_char;
+static int yy_n_chars;         /* number of characters read into yy_ch_buf */
+int yyleng;
+
+/* Points to current character in buffer. */
+static char *yy_c_buf_p = (char *) 0;
+static int yy_init = 0;                /* whether we need to initialize */
+static int yy_start = 0;       /* start state number */
+
+/* Flag which is used to allow yywrap()'s to do buffer switches
+ * instead of setting up a fresh yyin.  A bit of a hack ...
+ */
+static int yy_did_buffer_switch_on_eof;
+
+void yyrestart (FILE *input_file  );
+void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer  );
+YY_BUFFER_STATE yy_create_buffer (FILE *file,int size  );
+void yy_delete_buffer (YY_BUFFER_STATE b  );
+void yy_flush_buffer (YY_BUFFER_STATE b  );
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer  );
+void yypop_buffer_state (void );
+
+static void yyensure_buffer_stack (void );
+static void yy_load_buffer_state (void );
+static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file  );
+
+#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
+
+YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size  );
+YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str  );
+YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len  );
+
+void *yyalloc (yy_size_t  );
+void *yyrealloc (void *,yy_size_t  );
+void yyfree (void *  );
+
+#define yy_new_buffer yy_create_buffer
+
+#define yy_set_interactive(is_interactive) \
+       { \
+       if ( ! YY_CURRENT_BUFFER ){ \
+        yyensure_buffer_stack (); \
+               YY_CURRENT_BUFFER_LVALUE =    \
+            yy_create_buffer(yyin,YY_BUF_SIZE ); \
+       } \
+       YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+       }
+
+#define yy_set_bol(at_bol) \
+       { \
+       if ( ! YY_CURRENT_BUFFER ){\
+        yyensure_buffer_stack (); \
+               YY_CURRENT_BUFFER_LVALUE =    \
+            yy_create_buffer(yyin,YY_BUF_SIZE ); \
+       } \
+       YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+       }
+
+#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
+
+/* Begin user sect3 */
+
+#define yywrap() 1
+#define YY_SKIP_YYWRAP
+
+typedef unsigned char YY_CHAR;
+
+FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
+
+typedef int yy_state_type;
+
+extern int yylineno;
+
+int yylineno = 1;
+
+extern char *yytext;
+#define yytext_ptr yytext
+
+static yy_state_type yy_get_previous_state (void );
+static yy_state_type yy_try_NUL_trans (yy_state_type current_state  );
+static int yy_get_next_buffer (void );
+static void yy_fatal_error (yyconst char msg[]  );
+
+/* Done after the current pattern has been matched and before the
+ * corresponding action - sets up yytext.
+ */
+#define YY_DO_BEFORE_ACTION \
+       (yytext_ptr) = yy_bp; \
+       yyleng = (size_t) (yy_cp - yy_bp); \
+       (yy_hold_char) = *yy_cp; \
+       *yy_cp = '\0'; \
+       (yy_c_buf_p) = yy_cp;
+
+#define YY_NUM_RULES 20
+#define YY_END_OF_BUFFER 21
+/* This struct is not used in this scanner,
+   but its presence is necessary. */
+struct yy_trans_info
+       {
+       flex_int32_t yy_verify;
+       flex_int32_t yy_nxt;
+       };
+static yyconst flex_int16_t yy_accept[94] =
+    {   0,
+        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
+       21,   19,   16,   16,   19,   19,   19,    8,    8,   19,
+        8,   19,   19,   19,   19,   14,   15,   15,   19,    9,
+        9,   16,    0,    3,    0,    0,   10,    0,    0,    0,
+        0,    0,    0,    8,    8,    6,    0,    7,    0,    2,
+        0,   13,   13,   15,   15,    9,    0,   12,   10,    0,
+        0,    0,    0,   18,    0,    0,    0,    2,    9,    0,
+       17,    0,    0,    0,   11,    0,    0,    0,    0,    0,
+        0,    0,    0,    0,    4,    0,    0,    1,    0,    0,
+        0,    5,    0
+
+    } ;
+
+static yyconst flex_int32_t yy_ec[256] =
+    {   0,
+        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
+        2,    2,    2,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    2,    1,    4,    5,    1,    1,    6,    1,    1,
+        1,    7,    8,    8,    9,    8,   10,   11,   12,   13,
+       13,   13,   13,   13,   13,   13,   13,   14,    1,    1,
+        1,    1,    8,    8,   15,   15,   15,   15,   15,   15,
+       16,   16,   16,   16,   16,   16,   16,   16,   16,   16,
+       16,   16,   16,   16,   16,   16,   16,   17,   16,   16,
+        1,   18,   19,    1,   16,    1,   15,   20,   21,   22,
+
+       23,   15,   16,   24,   25,   16,   16,   26,   27,   28,
+       24,   16,   16,   29,   30,   31,   32,   33,   16,   17,
+       16,   16,   34,    1,   35,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1
+    } ;
+
+static yyconst flex_int32_t yy_meta[36] =
+    {   0,
+        1,    1,    1,    1,    2,    1,    2,    2,    2,    3,
+        4,    4,    4,    5,    6,    7,    7,    1,    1,    6,
+        6,    6,    6,    7,    7,    7,    7,    7,    7,    7,
+        7,    7,    7,    8,    1
+    } ;
+
+static yyconst flex_int16_t yy_base[107] =
+    {   0,
+        0,    0,   32,    0,   53,    0,   76,    0,  108,  111,
+      280,  288,   37,   39,   33,   36,  106,    0,  123,  146,
+      255,  251,   45,    0,  159,  288,    0,   53,  108,  172,
+      114,  127,  158,  288,  245,    0,    0,  234,  235,  236,
+      197,  195,  199,    0,    0,  288,    0,  288,  160,  288,
+      183,  288,    0,    0,  183,  182,    0,    0,    0,    0,
+      204,  189,  207,  288,  179,  187,  180,  194,    0,  171,
+      288,  196,  178,  174,  288,  169,  169,  177,  165,  153,
+      143,  155,  137,  118,  288,  122,   42,  288,   36,   36,
+       40,  288,  288,  212,  218,  223,  229,  234,  239,  245,
+
+      251,  255,  262,  270,  275,  280
+    } ;
+
+static yyconst flex_int16_t yy_def[107] =
+    {   0,
+       93,    1,    1,    3,    3,    5,   93,    7,    3,    3,
+       93,   93,   93,   93,   94,   95,   93,   96,   93,   19,
+       19,   20,   97,   98,   20,   93,   99,  100,   95,   93,
+       93,   93,   94,   93,   94,  101,  102,   93,  103,  104,
+       93,   93,   93,   96,   19,   93,   20,   93,   97,   93,
+       97,   93,   20,   99,  100,   93,  105,  101,  102,  106,
+      103,  103,  104,   93,   93,   93,   93,   94,  105,  106,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,    0,   93,   93,   93,   93,   93,   93,   93,
+
+       93,   93,   93,   93,   93,   93
+    } ;
+
+static yyconst flex_int16_t yy_nxt[324] =
+    {   0,
+       12,   13,   14,   15,   12,   16,   12,   12,   12,   17,
+       18,   18,   18,   12,   19,   20,   20,   12,   12,   21,
+       19,   21,   19,   22,   20,   20,   20,   20,   20,   20,
+       20,   20,   20,   12,   12,   23,   34,   12,   32,   32,
+       32,   32,   12,   12,   12,   36,   20,   33,   50,   92,
+       35,   20,   20,   20,   20,   20,   15,   54,   91,   54,
+       54,   54,   51,   24,   24,   24,   46,   25,   90,   38,
+       89,   26,   25,   25,   25,   25,   12,   13,   14,   15,
+       27,   12,   27,   27,   27,   17,   27,   27,   27,   12,
+       28,   28,   28,   12,   12,   28,   28,   28,   28,   28,
+
+       28,   28,   28,   28,   28,   28,   28,   28,   28,   12,
+       12,   15,   39,   29,   15,   40,   29,   93,   30,   31,
+       31,   30,   31,   31,   56,   56,   56,   41,   32,   32,
+       42,   88,   43,   45,   45,   45,   46,   45,   47,   47,
+       87,   38,   45,   45,   45,   45,   47,   47,   47,   47,
+       47,   47,   47,   47,   47,   47,   47,   47,   47,   86,
+       47,   34,   33,   50,   85,   47,   47,   47,   47,   53,
+       53,   53,   84,   53,   83,   35,   82,   51,   53,   53,
+       53,   53,   56,   56,   56,   93,   68,   54,   57,   54,
+       54,   54,   56,   56,   56,   62,   46,   34,   71,   81,
+
+       80,   79,   78,   77,   76,   75,   74,   73,   72,   64,
+       62,   35,   33,   33,   33,   33,   33,   33,   33,   33,
+       37,   67,   66,   37,   37,   37,   44,   65,   44,   49,
+       49,   49,   49,   49,   49,   49,   49,   52,   64,   52,
+       54,   62,   54,   60,   54,   54,   55,   93,   55,   55,
+       55,   55,   58,   58,   58,   48,   58,   58,   59,   48,
+       59,   59,   61,   61,   61,   61,   61,   61,   61,   61,
+       63,   63,   63,   63,   63,   63,   63,   63,   69,   93,
+       69,   70,   70,   70,   93,   70,   70,   11,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93
+    } ;
+
+static yyconst flex_int16_t yy_chk[324] =
+    {   0,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
+        1,    1,    1,    1,    1,    3,   15,    3,   13,   13,
+       14,   14,    3,    3,    3,   16,    3,   23,   23,   91,
+       15,    3,    3,    3,    3,    3,    5,   28,   90,   28,
+       28,   28,   23,    5,    5,    5,   28,    5,   89,   16,
+       87,    5,    5,    5,    5,    5,    7,    7,    7,    7,
+        7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
+        7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
+
+        7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
+        7,    9,   17,    9,   10,   17,   10,   29,    9,    9,
+        9,   10,   10,   10,   31,   31,   31,   17,   32,   32,
+       17,   86,   17,   19,   19,   19,   19,   19,   19,   19,
+       84,   29,   19,   19,   19,   19,   19,   19,   19,   19,
+       19,   19,   19,   19,   19,   19,   20,   20,   20,   83,
+       20,   33,   49,   49,   82,   20,   20,   20,   20,   25,
+       25,   25,   81,   25,   80,   33,   79,   49,   25,   25,
+       25,   25,   30,   30,   30,   51,   51,   55,   30,   55,
+       55,   55,   56,   56,   56,   62,   55,   68,   62,   78,
+
+       77,   76,   74,   73,   72,   70,   67,   66,   65,   63,
+       61,   68,   94,   94,   94,   94,   94,   94,   94,   94,
+       95,   43,   42,   95,   95,   95,   96,   41,   96,   97,
+       97,   97,   97,   97,   97,   97,   97,   98,   40,   98,
+       99,   39,   99,   38,   99,   99,  100,   35,  100,  100,
+      100,  100,  101,  101,  101,   22,  101,  101,  102,   21,
+      102,  102,  103,  103,  103,  103,  103,  103,  103,  103,
+      104,  104,  104,  104,  104,  104,  104,  104,  105,   11,
+      105,  106,  106,  106,    0,  106,  106,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93
+    } ;
+
+/* Table of booleans, true if rule could match eol. */
+static yyconst flex_int32_t yy_rule_can_match_eol[21] =
+    {   0,
+0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 
+    0,     };
+
+static yy_state_type yy_last_accepting_state;
+static char *yy_last_accepting_cpos;
+
+extern int yy_flex_debug;
+int yy_flex_debug = 0;
+
+/* The intent behind this definition is that it'll catch
+ * any uses of REJECT which flex missed.
+ */
+#define REJECT reject_used_but_not_detected
+#define yymore() yymore_used_but_not_detected
+#define YY_MORE_ADJ 0
+#define YY_RESTORE_YY_MORE_OFFSET
+char *yytext;
+#line 1 "dtc-lexer.l"
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+
+
+
+#line 33 "dtc-lexer.l"
+#include "dtc.h"
+#include "srcpos.h"
+#include "dtc-parser.tab.h"
+
+
+/*#define LEXDEBUG     1*/
+
+#ifdef LEXDEBUG
+#define DPRINT(fmt, ...)       fprintf(stderr, fmt, ##__VA_ARGS__)
+#else
+#define DPRINT(fmt, ...)       do { } while (0)
+#endif
+
+static int dts_version; /* = 0 */
+
+#define BEGIN_DEFAULT()        if (dts_version == 0) { \
+                               DPRINT("<INITIAL>\n"); \
+                               BEGIN(INITIAL); \
+                       } else { \
+                               DPRINT("<V1>\n"); \
+                               BEGIN(V1); \
+                       }
+#line 627 "dtc-lexer.lex.c"
+
+#define INITIAL 0
+#define INCLUDE 1
+#define BYTESTRING 2
+#define PROPNODENAME 3
+#define V1 4
+
+#ifndef YY_NO_UNISTD_H
+/* Special case for "unistd.h", since it is non-ANSI. We include it way
+ * down here because we want the user's section 1 to have been scanned first.
+ * The user has a chance to override it with an option.
+ */
+#include <unistd.h>
+#endif
+
+#ifndef YY_EXTRA_TYPE
+#define YY_EXTRA_TYPE void *
+#endif
+
+static int yy_init_globals (void );
+
+/* Macros after this point can all be overridden by user definitions in
+ * section 1.
+ */
+
+#ifndef YY_SKIP_YYWRAP
+#ifdef __cplusplus
+extern "C" int yywrap (void );
+#else
+extern int yywrap (void );
+#endif
+#endif
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char *,yyconst char *,int );
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * );
+#endif
+
+#ifndef YY_NO_INPUT
+
+#ifdef __cplusplus
+static int yyinput (void );
+#else
+static int input (void );
+#endif
+
+#endif
+
+/* Amount of stuff to slurp up with each read. */
+#ifndef YY_READ_BUF_SIZE
+#define YY_READ_BUF_SIZE 8192
+#endif
+
+/* Copy whatever the last rule matched to the standard output. */
+#ifndef ECHO
+/* This used to be an fputs(), but since the string might contain NUL's,
+ * we now use fwrite().
+ */
+#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
+#endif
+
+/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
+ * is returned in "result".
+ */
+#ifndef YY_INPUT
+#define YY_INPUT(buf,result,max_size) \
+       if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
+               { \
+               int c = '*'; \
+               size_t n; \
+               for ( n = 0; n < max_size && \
+                            (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
+                       buf[n] = (char) c; \
+               if ( c == '\n' ) \
+                       buf[n++] = (char) c; \
+               if ( c == EOF && ferror( yyin ) ) \
+                       YY_FATAL_ERROR( "input in flex scanner failed" ); \
+               result = n; \
+               } \
+       else \
+               { \
+               errno=0; \
+               while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
+                       { \
+                       if( errno != EINTR) \
+                               { \
+                               YY_FATAL_ERROR( "input in flex scanner failed" ); \
+                               break; \
+                               } \
+                       errno=0; \
+                       clearerr(yyin); \
+                       } \
+               }\
+\
+
+#endif
+
+/* No semi-colon after return; correct usage is to write "yyterminate();" -
+ * we don't want an extra ';' after the "return" because that will cause
+ * some compilers to complain about unreachable statements.
+ */
+#ifndef yyterminate
+#define yyterminate() return YY_NULL
+#endif
+
+/* Number of entries by which start-condition stack grows. */
+#ifndef YY_START_STACK_INCR
+#define YY_START_STACK_INCR 25
+#endif
+
+/* Report a fatal error. */
+#ifndef YY_FATAL_ERROR
+#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
+#endif
+
+/* end tables serialization structures and prototypes */
+
+/* Default declaration of generated scanner - a define so the user can
+ * easily add parameters.
+ */
+#ifndef YY_DECL
+#define YY_DECL_IS_OURS 1
+
+extern int yylex (void);
+
+#define YY_DECL int yylex (void)
+#endif /* !YY_DECL */
+
+/* Code executed at the beginning of each rule, after yytext and yyleng
+ * have been set up.
+ */
+#ifndef YY_USER_ACTION
+#define YY_USER_ACTION
+#endif
+
+/* Code executed at the end of each rule. */
+#ifndef YY_BREAK
+#define YY_BREAK break;
+#endif
+
+#define YY_RULE_SETUP \
+       YY_USER_ACTION
+
+/** The main scanner function which does all the work.
+ */
+YY_DECL
+{
+       register yy_state_type yy_current_state;
+       register char *yy_cp, *yy_bp;
+       register int yy_act;
+    
+#line 57 "dtc-lexer.l"
+
+#line 784 "dtc-lexer.lex.c"
+
+       if ( !(yy_init) )
+               {
+               (yy_init) = 1;
+
+#ifdef YY_USER_INIT
+               YY_USER_INIT;
+#endif
+
+               if ( ! (yy_start) )
+                       (yy_start) = 1; /* first start state */
+
+               if ( ! yyin )
+                       yyin = stdin;
+
+               if ( ! yyout )
+                       yyout = stdout;
+
+               if ( ! YY_CURRENT_BUFFER ) {
+                       yyensure_buffer_stack ();
+                       YY_CURRENT_BUFFER_LVALUE =
+                               yy_create_buffer(yyin,YY_BUF_SIZE );
+               }
+
+               yy_load_buffer_state( );
+               }
+
+       while ( 1 )             /* loops until end-of-file is reached */
+               {
+               yy_cp = (yy_c_buf_p);
+
+               /* Support of yytext. */
+               *yy_cp = (yy_hold_char);
+
+               /* yy_bp points to the position in yy_ch_buf of the start of
+                * the current run.
+                */
+               yy_bp = yy_cp;
+
+               yy_current_state = (yy_start);
+yy_match:
+               do
+                       {
+                       register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
+                       if ( yy_accept[yy_current_state] )
+                               {
+                               (yy_last_accepting_state) = yy_current_state;
+                               (yy_last_accepting_cpos) = yy_cp;
+                               }
+                       while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+                               {
+                               yy_current_state = (int) yy_def[yy_current_state];
+                               if ( yy_current_state >= 94 )
+                                       yy_c = yy_meta[(unsigned int) yy_c];
+                               }
+                       yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+                       ++yy_cp;
+                       }
+               while ( yy_base[yy_current_state] != 288 );
+
+yy_find_action:
+               yy_act = yy_accept[yy_current_state];
+               if ( yy_act == 0 )
+                       { /* have to back up */
+                       yy_cp = (yy_last_accepting_cpos);
+                       yy_current_state = (yy_last_accepting_state);
+                       yy_act = yy_accept[yy_current_state];
+                       }
+
+               YY_DO_BEFORE_ACTION;
+
+               if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
+                       {
+                       int yyl;
+                       for ( yyl = 0; yyl < yyleng; ++yyl )
+                               if ( yytext[yyl] == '\n' )
+                                          
+    yylineno++;
+;
+                       }
+
+do_action:     /* This label is used only to access EOF actions. */
+
+               switch ( yy_act )
+       { /* beginning of action switch */
+                       case 0: /* must back up */
+                       /* undo the effects of YY_DO_BEFORE_ACTION */
+                       *yy_cp = (yy_hold_char);
+                       yy_cp = (yy_last_accepting_cpos);
+                       yy_current_state = (yy_last_accepting_state);
+                       goto yy_find_action;
+
+case 1:
+YY_RULE_SETUP
+#line 58 "dtc-lexer.l"
+BEGIN(INCLUDE);
+       YY_BREAK
+case 2:
+YY_RULE_SETUP
+#line 60 "dtc-lexer.l"
+{
+                       yytext[strlen(yytext) - 1] = 0;
+                       if (!push_input_file(yytext + 1)) {
+                               /* Some unrecoverable error.*/
+                               exit(1);
+                       }
+                       BEGIN_DEFAULT();
+               }
+       YY_BREAK
+case YY_STATE_EOF(INITIAL):
+case YY_STATE_EOF(INCLUDE):
+case YY_STATE_EOF(BYTESTRING):
+case YY_STATE_EOF(PROPNODENAME):
+case YY_STATE_EOF(V1):
+#line 70 "dtc-lexer.l"
+{
+                       if (!pop_input_file()) {
+                               yyterminate();
+                       }
+               }
+       YY_BREAK
+case 3:
+/* rule 3 can match eol */
+YY_RULE_SETUP
+#line 76 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("String: %s\n", yytext);
+                       yylval.data = data_copy_escape_string(yytext+1,
+                                       yyleng-2);
+                       yylloc.first_line = yylineno;
+                       return DT_STRING;
+               }
+       YY_BREAK
+case 4:
+YY_RULE_SETUP
+#line 86 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Keyword: /dts-v1/\n");
+                       dts_version = 1;
+                       BEGIN_DEFAULT();
+                       return DT_V1;
+               }
+       YY_BREAK
+case 5:
+YY_RULE_SETUP
+#line 95 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Keyword: /memreserve/\n");
+                       BEGIN_DEFAULT();
+                       return DT_MEMRESERVE;
+               }
+       YY_BREAK
+case 6:
+YY_RULE_SETUP
+#line 103 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Label: %s\n", yytext);
+                       yylval.labelref = strdup(yytext);
+                       yylval.labelref[yyleng-1] = '\0';
+                       return DT_LABEL;
+               }
+       YY_BREAK
+case 7:
+YY_RULE_SETUP
+#line 112 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       if (*yytext == 'b')
+                               yylval.cbase = 2;
+                       else if (*yytext == 'o')
+                               yylval.cbase = 8;
+                       else if (*yytext == 'd')
+                               yylval.cbase = 10;
+                       else
+                               yylval.cbase = 16;
+                       DPRINT("Base: %d\n", yylval.cbase);
+                       return DT_BASE;
+               }
+       YY_BREAK
+case 8:
+YY_RULE_SETUP
+#line 127 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yylval.literal = strdup(yytext);
+                       DPRINT("Literal: '%s'\n", yylval.literal);
+                       return DT_LEGACYLITERAL;
+               }
+       YY_BREAK
+case 9:
+YY_RULE_SETUP
+#line 135 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yylval.literal = strdup(yytext);
+                       DPRINT("Literal: '%s'\n", yylval.literal);
+                       return DT_LITERAL;
+               }
+       YY_BREAK
+case 10:
+YY_RULE_SETUP
+#line 143 "dtc-lexer.l"
+{      /* label reference */
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Ref: %s\n", yytext+1);
+                       yylval.labelref = strdup(yytext+1);
+                       return DT_REF;
+               }
+       YY_BREAK
+case 11:
+YY_RULE_SETUP
+#line 151 "dtc-lexer.l"
+{      /* new-style path reference */
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yytext[yyleng-1] = '\0';
+                       DPRINT("Ref: %s\n", yytext+2);
+                       yylval.labelref = strdup(yytext+2);
+                       return DT_REF;
+               }
+       YY_BREAK
+case 12:
+YY_RULE_SETUP
+#line 160 "dtc-lexer.l"
+{      /* old-style path reference */
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Ref: %s\n", yytext+1);
+                       yylval.labelref = strdup(yytext+1);
+                       return DT_REF;
+               }
+       YY_BREAK
+case 13:
+YY_RULE_SETUP
+#line 168 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       yylval.byte = strtol(yytext, NULL, 16);
+                       DPRINT("Byte: %02x\n", (int)yylval.byte);
+                       return DT_BYTE;
+               }
+       YY_BREAK
+case 14:
+YY_RULE_SETUP
+#line 176 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("/BYTESTRING\n");
+                       BEGIN_DEFAULT();
+                       return ']';
+               }
+       YY_BREAK
+case 15:
+YY_RULE_SETUP
+#line 184 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("PropNodeName: %s\n", yytext);
+                       yylval.propnodename = strdup(yytext);
+                       BEGIN_DEFAULT();
+                       return DT_PROPNODENAME;
+               }
+       YY_BREAK
+case 16:
+/* rule 16 can match eol */
+YY_RULE_SETUP
+#line 194 "dtc-lexer.l"
+/* eat whitespace */
+       YY_BREAK
+case 17:
+/* rule 17 can match eol */
+YY_RULE_SETUP
+#line 196 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Comment: %s\n", yytext);
+                       /* eat comments */
+               }
+       YY_BREAK
+case 18:
+/* rule 18 can match eol */
+YY_RULE_SETUP
+#line 203 "dtc-lexer.l"
+/* eat line comments */
+       YY_BREAK
+case 19:
+YY_RULE_SETUP
+#line 205 "dtc-lexer.l"
+{
+                       yylloc.filenum = srcpos_filenum;
+                       yylloc.first_line = yylineno;
+                       DPRINT("Char: %c (\\x%02x)\n", yytext[0],
+                               (unsigned)yytext[0]);
+                       if (yytext[0] == '[') {
+                               DPRINT("<BYTESTRING>\n");
+                               BEGIN(BYTESTRING);
+                       }
+                       if ((yytext[0] == '{')
+                           || (yytext[0] == ';')) {
+                               DPRINT("<PROPNODENAME>\n");
+                               BEGIN(PROPNODENAME);
+                       }
+                       return yytext[0];
+               }
+       YY_BREAK
+case 20:
+YY_RULE_SETUP
+#line 222 "dtc-lexer.l"
+ECHO;
+       YY_BREAK
+#line 1111 "dtc-lexer.lex.c"
+
+       case YY_END_OF_BUFFER:
+               {
+               /* Amount of text matched not including the EOB char. */
+               int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+               /* Undo the effects of YY_DO_BEFORE_ACTION. */
+               *yy_cp = (yy_hold_char);
+               YY_RESTORE_YY_MORE_OFFSET
+
+               if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+                       {
+                       /* We're scanning a new file or input source.  It's
+                        * possible that this happened because the user
+                        * just pointed yyin at a new source and called
+                        * yylex().  If so, then we have to assure
+                        * consistency between YY_CURRENT_BUFFER and our
+                        * globals.  Here is the right place to do so, because
+                        * this is the first action (other than possibly a
+                        * back-up) that will match for the new input source.
+                        */
+                       (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+                       YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
+                       YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+                       }
+
+               /* Note that here we test for yy_c_buf_p "<=" to the position
+                * of the first EOB in the buffer, since yy_c_buf_p will
+                * already have been incremented past the NUL character
+                * (since all states make transitions on EOB to the
+                * end-of-buffer state).  Contrast this with the test
+                * in input().
+                */
+               if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+                       { /* This was really a NUL. */
+                       yy_state_type yy_next_state;
+
+                       (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+                       yy_current_state = yy_get_previous_state(  );
+
+                       /* Okay, we're now positioned to make the NUL
+                        * transition.  We couldn't have
+                        * yy_get_previous_state() go ahead and do it
+                        * for us because it doesn't know how to deal
+                        * with the possibility of jamming (and we don't
+                        * want to build jamming into it because then it
+                        * will run more slowly).
+                        */
+
+                       yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+                       yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+                       if ( yy_next_state )
+                               {
+                               /* Consume the NUL. */
+                               yy_cp = ++(yy_c_buf_p);
+                               yy_current_state = yy_next_state;
+                               goto yy_match;
+                               }
+
+                       else
+                               {
+                               yy_cp = (yy_c_buf_p);
+                               goto yy_find_action;
+                               }
+                       }
+
+               else switch ( yy_get_next_buffer(  ) )
+                       {
+                       case EOB_ACT_END_OF_FILE:
+                               {
+                               (yy_did_buffer_switch_on_eof) = 0;
+
+                               if ( yywrap( ) )
+                                       {
+                                       /* Note: because we've taken care in
+                                        * yy_get_next_buffer() to have set up
+                                        * yytext, we can now set up
+                                        * yy_c_buf_p so that if some total
+                                        * hoser (like flex itself) wants to
+                                        * call the scanner after we return the
+                                        * YY_NULL, it'll still work - another
+                                        * YY_NULL will get returned.
+                                        */
+                                       (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+                                       yy_act = YY_STATE_EOF(YY_START);
+                                       goto do_action;
+                                       }
+
+                               else
+                                       {
+                                       if ( ! (yy_did_buffer_switch_on_eof) )
+                                               YY_NEW_FILE;
+                                       }
+                               break;
+                               }
+
+                       case EOB_ACT_CONTINUE_SCAN:
+                               (yy_c_buf_p) =
+                                       (yytext_ptr) + yy_amount_of_matched_text;
+
+                               yy_current_state = yy_get_previous_state(  );
+
+                               yy_cp = (yy_c_buf_p);
+                               yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+                               goto yy_match;
+
+                       case EOB_ACT_LAST_MATCH:
+                               (yy_c_buf_p) =
+                               &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+                               yy_current_state = yy_get_previous_state(  );
+
+                               yy_cp = (yy_c_buf_p);
+                               yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+                               goto yy_find_action;
+                       }
+               break;
+               }
+
+       default:
+               YY_FATAL_ERROR(
+                       "fatal flex scanner internal error--no action found" );
+       } /* end of action switch */
+               } /* end of scanning one token */
+} /* end of yylex */
+
+/* yy_get_next_buffer - try to read in a new buffer
+ *
+ * Returns a code representing an action:
+ *     EOB_ACT_LAST_MATCH -
+ *     EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ *     EOB_ACT_END_OF_FILE - end of file
+ */
+static int yy_get_next_buffer (void)
+{
+       register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+       register char *source = (yytext_ptr);
+       register int number_to_move, i;
+       int ret_val;
+
+       if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+               YY_FATAL_ERROR(
+               "fatal flex scanner internal error--end of buffer missed" );
+
+       if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+               { /* Don't try to fill the buffer, so this is an EOF. */
+               if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+                       {
+                       /* We matched a single character, the EOB, so
+                        * treat this as a final EOF.
+                        */
+                       return EOB_ACT_END_OF_FILE;
+                       }
+
+               else
+                       {
+                       /* We matched some text prior to the EOB, first
+                        * process it.
+                        */
+                       return EOB_ACT_LAST_MATCH;
+                       }
+               }
+
+       /* Try to read more data. */
+
+       /* First move last chars to start of buffer. */
+       number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+       for ( i = 0; i < number_to_move; ++i )
+               *(dest++) = *(source++);
+
+       if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+               /* don't do the read, it's not guaranteed to return an EOF,
+                * just force an EOF
+                */
+               YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+       else
+               {
+                       int num_to_read =
+                       YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+               while ( num_to_read <= 0 )
+                       { /* Not enough room in the buffer - grow it. */
+
+                       /* just a shorter name for the current buffer */
+                       YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
+
+                       int yy_c_buf_p_offset =
+                               (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+                       if ( b->yy_is_our_buffer )
+                               {
+                               int new_size = b->yy_buf_size * 2;
+
+                               if ( new_size <= 0 )
+                                       b->yy_buf_size += b->yy_buf_size / 8;
+                               else
+                                       b->yy_buf_size *= 2;
+
+                               b->yy_ch_buf = (char *)
+                                       /* Include room in for 2 EOB chars. */
+                                       yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2  );
+                               }
+                       else
+                               /* Can't grow it, we don't own it. */
+                               b->yy_ch_buf = 0;
+
+                       if ( ! b->yy_ch_buf )
+                               YY_FATAL_ERROR(
+                               "fatal error - scanner input buffer overflow" );
+
+                       (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+                       num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+                                               number_to_move - 1;
+
+                       }
+
+               if ( num_to_read > YY_READ_BUF_SIZE )
+                       num_to_read = YY_READ_BUF_SIZE;
+
+               /* Read in more data. */
+               YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
+                       (yy_n_chars), (size_t) num_to_read );
+
+               YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+               }
+
+       if ( (yy_n_chars) == 0 )
+               {
+               if ( number_to_move == YY_MORE_ADJ )
+                       {
+                       ret_val = EOB_ACT_END_OF_FILE;
+                       yyrestart(yyin  );
+                       }
+
+               else
+                       {
+                       ret_val = EOB_ACT_LAST_MATCH;
+                       YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+                               YY_BUFFER_EOF_PENDING;
+                       }
+               }
+
+       else
+               ret_val = EOB_ACT_CONTINUE_SCAN;
+
+       (yy_n_chars) += number_to_move;
+       YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
+       YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+       (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+
+       return ret_val;
+}
+
+/* yy_get_previous_state - get the state just before the EOB char was reached */
+
+    static yy_state_type yy_get_previous_state (void)
+{
+       register yy_state_type yy_current_state;
+       register char *yy_cp;
+    
+       yy_current_state = (yy_start);
+
+       for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+               {
+               register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+               if ( yy_accept[yy_current_state] )
+                       {
+                       (yy_last_accepting_state) = yy_current_state;
+                       (yy_last_accepting_cpos) = yy_cp;
+                       }
+               while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+                       {
+                       yy_current_state = (int) yy_def[yy_current_state];
+                       if ( yy_current_state >= 94 )
+                               yy_c = yy_meta[(unsigned int) yy_c];
+                       }
+               yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+               }
+
+       return yy_current_state;
+}
+
+/* yy_try_NUL_trans - try to make a transition on the NUL character
+ *
+ * synopsis
+ *     next_state = yy_try_NUL_trans( current_state );
+ */
+    static yy_state_type yy_try_NUL_trans  (yy_state_type yy_current_state )
+{
+       register int yy_is_jam;
+       register char *yy_cp = (yy_c_buf_p);
+
+       register YY_CHAR yy_c = 1;
+       if ( yy_accept[yy_current_state] )
+               {
+               (yy_last_accepting_state) = yy_current_state;
+               (yy_last_accepting_cpos) = yy_cp;
+               }
+       while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+               {
+               yy_current_state = (int) yy_def[yy_current_state];
+               if ( yy_current_state >= 94 )
+                       yy_c = yy_meta[(unsigned int) yy_c];
+               }
+       yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+       yy_is_jam = (yy_current_state == 93);
+
+       return yy_is_jam ? 0 : yy_current_state;
+}
+
+#ifndef YY_NO_INPUT
+#ifdef __cplusplus
+    static int yyinput (void)
+#else
+    static int input  (void)
+#endif
+
+{
+       int c;
+    
+       *(yy_c_buf_p) = (yy_hold_char);
+
+       if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+               {
+               /* yy_c_buf_p now points to the character we want to return.
+                * If this occurs *before* the EOB characters, then it's a
+                * valid NUL; if not, then we've hit the end of the buffer.
+                */
+               if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+                       /* This was really a NUL. */
+                       *(yy_c_buf_p) = '\0';
+
+               else
+                       { /* need more input */
+                       int offset = (yy_c_buf_p) - (yytext_ptr);
+                       ++(yy_c_buf_p);
+
+                       switch ( yy_get_next_buffer(  ) )
+                               {
+                               case EOB_ACT_LAST_MATCH:
+                                       /* This happens because yy_g_n_b()
+                                        * sees that we've accumulated a
+                                        * token and flags that we need to
+                                        * try matching the token before
+                                        * proceeding.  But for input(),
+                                        * there's no matching to consider.
+                                        * So convert the EOB_ACT_LAST_MATCH
+                                        * to EOB_ACT_END_OF_FILE.
+                                        */
+
+                                       /* Reset buffer status. */
+                                       yyrestart(yyin );
+
+                                       /*FALLTHROUGH*/
+
+                               case EOB_ACT_END_OF_FILE:
+                                       {
+                                       if ( yywrap( ) )
+                                               return EOF;
+
+                                       if ( ! (yy_did_buffer_switch_on_eof) )
+                                               YY_NEW_FILE;
+#ifdef __cplusplus
+                                       return yyinput();
+#else
+                                       return input();
+#endif
+                                       }
+
+                               case EOB_ACT_CONTINUE_SCAN:
+                                       (yy_c_buf_p) = (yytext_ptr) + offset;
+                                       break;
+                               }
+                       }
+               }
+
+       c = *(unsigned char *) (yy_c_buf_p);    /* cast for 8-bit char's */
+       *(yy_c_buf_p) = '\0';   /* preserve yytext */
+       (yy_hold_char) = *++(yy_c_buf_p);
+
+       if ( c == '\n' )
+                  
+    yylineno++;
+;
+
+       return c;
+}
+#endif /* ifndef YY_NO_INPUT */
+
+/** Immediately switch to a different input stream.
+ * @param input_file A readable stream.
+ * 
+ * @note This function does not reset the start condition to @c INITIAL .
+ */
+    void yyrestart  (FILE * input_file )
+{
+    
+       if ( ! YY_CURRENT_BUFFER ){
+        yyensure_buffer_stack ();
+               YY_CURRENT_BUFFER_LVALUE =
+            yy_create_buffer(yyin,YY_BUF_SIZE );
+       }
+
+       yy_init_buffer(YY_CURRENT_BUFFER,input_file );
+       yy_load_buffer_state( );
+}
+
+/** Switch to a different input buffer.
+ * @param new_buffer The new input buffer.
+ * 
+ */
+    void yy_switch_to_buffer  (YY_BUFFER_STATE  new_buffer )
+{
+    
+       /* TODO. We should be able to replace this entire function body
+        * with
+        *              yypop_buffer_state();
+        *              yypush_buffer_state(new_buffer);
+     */
+       yyensure_buffer_stack ();
+       if ( YY_CURRENT_BUFFER == new_buffer )
+               return;
+
+       if ( YY_CURRENT_BUFFER )
+               {
+               /* Flush out information for old buffer. */
+               *(yy_c_buf_p) = (yy_hold_char);
+               YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+               YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+               }
+
+       YY_CURRENT_BUFFER_LVALUE = new_buffer;
+       yy_load_buffer_state( );
+
+       /* We don't actually know whether we did this switch during
+        * EOF (yywrap()) processing, but the only time this flag
+        * is looked at is after yywrap() is called, so it's safe
+        * to go ahead and always set it.
+        */
+       (yy_did_buffer_switch_on_eof) = 1;
+}
+
+static void yy_load_buffer_state  (void)
+{
+       (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+       (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
+       yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
+       (yy_hold_char) = *(yy_c_buf_p);
+}
+
+/** Allocate and initialize an input buffer state.
+ * @param file A readable stream.
+ * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
+ * 
+ * @return the allocated buffer state.
+ */
+    YY_BUFFER_STATE yy_create_buffer  (FILE * file, int  size )
+{
+       YY_BUFFER_STATE b;
+    
+       b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
+       if ( ! b )
+               YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+       b->yy_buf_size = size;
+
+       /* yy_ch_buf has to be 2 characters longer than the size given because
+        * we need to put in 2 end-of-buffer characters.
+        */
+       b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2  );
+       if ( ! b->yy_ch_buf )
+               YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+       b->yy_is_our_buffer = 1;
+
+       yy_init_buffer(b,file );
+
+       return b;
+}
+
+/** Destroy the buffer.
+ * @param b a buffer created with yy_create_buffer()
+ * 
+ */
+    void yy_delete_buffer (YY_BUFFER_STATE  b )
+{
+    
+       if ( ! b )
+               return;
+
+       if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
+               YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+
+       if ( b->yy_is_our_buffer )
+               yyfree((void *) b->yy_ch_buf  );
+
+       yyfree((void *) b  );
+}
+
+#ifndef __cplusplus
+extern int isatty (int );
+#endif /* __cplusplus */
+    
+/* Initializes or reinitializes a buffer.
+ * This function is sometimes called more than once on the same buffer,
+ * such as during a yyrestart() or at EOF.
+ */
+    static void yy_init_buffer  (YY_BUFFER_STATE  b, FILE * file )
+
+{
+       int oerrno = errno;
+    
+       yy_flush_buffer(b );
+
+       b->yy_input_file = file;
+       b->yy_fill_buffer = 1;
+
+    /* If b is the current buffer, then yy_init_buffer was _probably_
+     * called from yyrestart() or through yy_get_next_buffer.
+     * In that case, we don't want to reset the lineno or column.
+     */
+    if (b != YY_CURRENT_BUFFER){
+        b->yy_bs_lineno = 1;
+        b->yy_bs_column = 0;
+    }
+
+        b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
+    
+       errno = oerrno;
+}
+
+/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
+ * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
+ * 
+ */
+    void yy_flush_buffer (YY_BUFFER_STATE  b )
+{
+       if ( ! b )
+               return;
+
+       b->yy_n_chars = 0;
+
+       /* We always need two end-of-buffer characters.  The first causes
+        * a transition to the end-of-buffer state.  The second causes
+        * a jam in that state.
+        */
+       b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
+       b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
+
+       b->yy_buf_pos = &b->yy_ch_buf[0];
+
+       b->yy_at_bol = 1;
+       b->yy_buffer_status = YY_BUFFER_NEW;
+
+       if ( b == YY_CURRENT_BUFFER )
+               yy_load_buffer_state( );
+}
+
+/** Pushes the new state onto the stack. The new state becomes
+ *  the current state. This function will allocate the stack
+ *  if necessary.
+ *  @param new_buffer The new state.
+ *  
+ */
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
+{
+       if (new_buffer == NULL)
+               return;
+
+       yyensure_buffer_stack();
+
+       /* This block is copied from yy_switch_to_buffer. */
+       if ( YY_CURRENT_BUFFER )
+               {
+               /* Flush out information for old buffer. */
+               *(yy_c_buf_p) = (yy_hold_char);
+               YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+               YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+               }
+
+       /* Only push if top exists. Otherwise, replace top. */
+       if (YY_CURRENT_BUFFER)
+               (yy_buffer_stack_top)++;
+       YY_CURRENT_BUFFER_LVALUE = new_buffer;
+
+       /* copied from yy_switch_to_buffer. */
+       yy_load_buffer_state( );
+       (yy_did_buffer_switch_on_eof) = 1;
+}
+
+/** Removes and deletes the top of the stack, if present.
+ *  The next element becomes the new top.
+ *  
+ */
+void yypop_buffer_state (void)
+{
+       if (!YY_CURRENT_BUFFER)
+               return;
+
+       yy_delete_buffer(YY_CURRENT_BUFFER );
+       YY_CURRENT_BUFFER_LVALUE = NULL;
+       if ((yy_buffer_stack_top) > 0)
+               --(yy_buffer_stack_top);
+
+       if (YY_CURRENT_BUFFER) {
+               yy_load_buffer_state( );
+               (yy_did_buffer_switch_on_eof) = 1;
+       }
+}
+
+/* Allocates the stack if it does not exist.
+ *  Guarantees space for at least one push.
+ */
+static void yyensure_buffer_stack (void)
+{
+       int num_to_alloc;
+    
+       if (!(yy_buffer_stack)) {
+
+               /* First allocation is just for 2 elements, since we don't know if this
+                * scanner will even need a stack. We use 2 instead of 1 to avoid an
+                * immediate realloc on the next call.
+         */
+               num_to_alloc = 1;
+               (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
+                                                               (num_to_alloc * sizeof(struct yy_buffer_state*)
+                                                               );
+               
+               memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
+                               
+               (yy_buffer_stack_max) = num_to_alloc;
+               (yy_buffer_stack_top) = 0;
+               return;
+       }
+
+       if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
+
+               /* Increase the buffer to prepare for a possible push. */
+               int grow_size = 8 /* arbitrary grow size */;
+
+               num_to_alloc = (yy_buffer_stack_max) + grow_size;
+               (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
+                                                               ((yy_buffer_stack),
+                                                               num_to_alloc * sizeof(struct yy_buffer_state*)
+                                                               );
+
+               /* zero only the new slots.*/
+               memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
+               (yy_buffer_stack_max) = num_to_alloc;
+       }
+}
+
+/** Setup the input buffer state to scan directly from a user-specified character buffer.
+ * @param base the character buffer
+ * @param size the size in bytes of the character buffer
+ * 
+ * @return the newly allocated buffer state object. 
+ */
+YY_BUFFER_STATE yy_scan_buffer  (char * base, yy_size_t  size )
+{
+       YY_BUFFER_STATE b;
+    
+       if ( size < 2 ||
+            base[size-2] != YY_END_OF_BUFFER_CHAR ||
+            base[size-1] != YY_END_OF_BUFFER_CHAR )
+               /* They forgot to leave room for the EOB's. */
+               return 0;
+
+       b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
+       if ( ! b )
+               YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
+
+       b->yy_buf_size = size - 2;      /* "- 2" to take care of EOB's */
+       b->yy_buf_pos = b->yy_ch_buf = base;
+       b->yy_is_our_buffer = 0;
+       b->yy_input_file = 0;
+       b->yy_n_chars = b->yy_buf_size;
+       b->yy_is_interactive = 0;
+       b->yy_at_bol = 1;
+       b->yy_fill_buffer = 0;
+       b->yy_buffer_status = YY_BUFFER_NEW;
+
+       yy_switch_to_buffer(b  );
+
+       return b;
+}
+
+/** Setup the input buffer state to scan a string. The next call to yylex() will
+ * scan from a @e copy of @a str.
+ * @param yystr a NUL-terminated string to scan
+ * 
+ * @return the newly allocated buffer state object.
+ * @note If you want to scan bytes that may contain NUL values, then use
+ *       yy_scan_bytes() instead.
+ */
+YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
+{
+    
+       return yy_scan_bytes(yystr,strlen(yystr) );
+}
+
+/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
+ * scan from a @e copy of @a bytes.
+ * @param bytes the byte buffer to scan
+ * @param len the number of bytes in the buffer pointed to by @a bytes.
+ * 
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE yy_scan_bytes  (yyconst char * yybytes, int  _yybytes_len )
+{
+       YY_BUFFER_STATE b;
+       char *buf;
+       yy_size_t n;
+       int i;
+    
+       /* Get memory for full buffer, including space for trailing EOB's. */
+       n = _yybytes_len + 2;
+       buf = (char *) yyalloc(n  );
+       if ( ! buf )
+               YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
+
+       for ( i = 0; i < _yybytes_len; ++i )
+               buf[i] = yybytes[i];
+
+       buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
+
+       b = yy_scan_buffer(buf,n );
+       if ( ! b )
+               YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
+
+       /* It's okay to grow etc. this buffer, and we should throw it
+        * away when we're done.
+        */
+       b->yy_is_our_buffer = 1;
+
+       return b;
+}
+
+#ifndef YY_EXIT_FAILURE
+#define YY_EXIT_FAILURE 2
+#endif
+
+static void yy_fatal_error (yyconst char* msg )
+{
+       (void) fprintf( stderr, "%s\n", msg );
+       exit( YY_EXIT_FAILURE );
+}
+
+/* Redefine yyless() so it works in section 3 code. */
+
+#undef yyless
+#define yyless(n) \
+       do \
+               { \
+               /* Undo effects of setting up yytext. */ \
+        int yyless_macro_arg = (n); \
+        YY_LESS_LINENO(yyless_macro_arg);\
+               yytext[yyleng] = (yy_hold_char); \
+               (yy_c_buf_p) = yytext + yyless_macro_arg; \
+               (yy_hold_char) = *(yy_c_buf_p); \
+               *(yy_c_buf_p) = '\0'; \
+               yyleng = yyless_macro_arg; \
+               } \
+       while ( 0 )
+
+/* Accessor  methods (get/set functions) to struct members. */
+
+/** Get the current line number.
+ * 
+ */
+int yyget_lineno  (void)
+{
+        
+    return yylineno;
+}
+
+/** Get the input stream.
+ * 
+ */
+FILE *yyget_in  (void)
+{
+        return yyin;
+}
+
+/** Get the output stream.
+ * 
+ */
+FILE *yyget_out  (void)
+{
+        return yyout;
+}
+
+/** Get the length of the current token.
+ * 
+ */
+int yyget_leng  (void)
+{
+        return yyleng;
+}
+
+/** Get the current token.
+ * 
+ */
+
+char *yyget_text  (void)
+{
+        return yytext;
+}
+
+/** Set the current line number.
+ * @param line_number
+ * 
+ */
+void yyset_lineno (int  line_number )
+{
+    
+    yylineno = line_number;
+}
+
+/** Set the input stream. This does not discard the current
+ * input buffer.
+ * @param in_str A readable stream.
+ * 
+ * @see yy_switch_to_buffer
+ */
+void yyset_in (FILE *  in_str )
+{
+        yyin = in_str ;
+}
+
+void yyset_out (FILE *  out_str )
+{
+        yyout = out_str ;
+}
+
+int yyget_debug  (void)
+{
+        return yy_flex_debug;
+}
+
+void yyset_debug (int  bdebug )
+{
+        yy_flex_debug = bdebug ;
+}
+
+static int yy_init_globals (void)
+{
+        /* Initialization is the same as for the non-reentrant scanner.
+     * This function is called from yylex_destroy(), so don't allocate here.
+     */
+
+    /* We do not touch yylineno unless the option is enabled. */
+    yylineno =  1;
+    
+    (yy_buffer_stack) = 0;
+    (yy_buffer_stack_top) = 0;
+    (yy_buffer_stack_max) = 0;
+    (yy_c_buf_p) = (char *) 0;
+    (yy_init) = 0;
+    (yy_start) = 0;
+
+/* Defined in main.c */
+#ifdef YY_STDINIT
+    yyin = stdin;
+    yyout = stdout;
+#else
+    yyin = (FILE *) 0;
+    yyout = (FILE *) 0;
+#endif
+
+    /* For future reference: Set errno on error, since we are called by
+     * yylex_init()
+     */
+    return 0;
+}
+
+/* yylex_destroy is for both reentrant and non-reentrant scanners. */
+int yylex_destroy  (void)
+{
+    
+    /* Pop the buffer stack, destroying each element. */
+       while(YY_CURRENT_BUFFER){
+               yy_delete_buffer(YY_CURRENT_BUFFER  );
+               YY_CURRENT_BUFFER_LVALUE = NULL;
+               yypop_buffer_state();
+       }
+
+       /* Destroy the stack itself. */
+       yyfree((yy_buffer_stack) );
+       (yy_buffer_stack) = NULL;
+
+    /* Reset the globals. This is important in a non-reentrant scanner so the next time
+     * yylex() is called, initialization will occur. */
+    yy_init_globals( );
+
+    return 0;
+}
+
+/*
+ * Internal utility routines.
+ */
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
+{
+       register int i;
+       for ( i = 0; i < n; ++i )
+               s1[i] = s2[i];
+}
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * s )
+{
+       register int n;
+       for ( n = 0; s[n]; ++n )
+               ;
+
+       return n;
+}
+#endif
+
+void *yyalloc (yy_size_t  size )
+{
+       return (void *) malloc( size );
+}
+
+void *yyrealloc  (void * ptr, yy_size_t  size )
+{
+       /* The cast to (char *) in the following accommodates both
+        * implementations that use char* generic pointers, and those
+        * that use void* generic pointers.  It works with the latter
+        * because both ANSI C and C++ allow castless assignment from
+        * any pointer type to void*, and deal with argument conversions
+        * as though doing an assignment.
+        */
+       return (void *) realloc( (char *) ptr, size );
+}
+
+void yyfree (void * ptr )
+{
+       free( (char *) ptr );   /* see yyrealloc() for (char *) cast */
+}
+
+#define YYTABLES_NAME "yytables"
+
+#line 222 "dtc-lexer.l"
+
+
+
+
+/*
+ * Stack of nested include file contexts.
+ */
+
+struct incl_file {
+       int filenum;
+       FILE *file;
+       YY_BUFFER_STATE yy_prev_buf;
+       int yy_prev_lineno;
+       struct incl_file *prev;
+};
+
+struct incl_file *incl_file_stack;
+
+
+/*
+ * Detect infinite include recursion.
+ */
+#define MAX_INCLUDE_DEPTH      (100)
+
+static int incl_depth = 0;
+
+
+int push_input_file(const char *filename)
+{
+       FILE *f;
+       struct incl_file *incl_file;
+
+       if (!filename) {
+               yyerror("No include file name given.");
+               return 0;
+       }
+
+       if (incl_depth++ >= MAX_INCLUDE_DEPTH) {
+               yyerror("Includes nested too deeply");
+               return 0;
+       }
+
+       f = dtc_open_file(filename);
+
+       incl_file = malloc(sizeof(struct incl_file));
+       if (!incl_file) {
+               yyerror("Can not allocate include file space.");
+               return 0;
+       }
+
+       /*
+        * Save current context.
+        */
+       incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
+       incl_file->yy_prev_lineno = yylineno;
+       incl_file->filenum = srcpos_filenum;
+       incl_file->file = yyin;
+       incl_file->prev = incl_file_stack;
+
+       incl_file_stack = incl_file;
+
+       /*
+        * Establish new context.
+        */
+       srcpos_filenum = lookup_file_name(filename, 0);
+       yylineno = 1;
+       yyin = f;
+       yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
+
+       return 1;
+}
+
+
+int pop_input_file(void)
+{
+       struct incl_file *incl_file;
+
+       if (incl_file_stack == 0)
+               return 0;
+
+       fclose(yyin);
+
+       /*
+        * Pop.
+        */
+       --incl_depth;
+       incl_file = incl_file_stack;
+       incl_file_stack = incl_file->prev;
+
+       /*
+        * Recover old context.
+        */
+       yy_delete_buffer(YY_CURRENT_BUFFER);
+       yy_switch_to_buffer(incl_file->yy_prev_buf);
+       yylineno = incl_file->yy_prev_lineno;
+       srcpos_filenum = incl_file->filenum;
+       yyin = incl_file->file;
+
+       /*
+        * Free old state.
+        */
+       free(incl_file);
+
+       if (YY_CURRENT_BUFFER == 0)
+               return 0;
+
+       return 1;
+}
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped powerpc.git/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
--- linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,1983 @@
+/* A Bison parser, made by GNU Bison 2.3.  */
+
+/* Skeleton implementation for Bison's Yacc-like parsers in C
+
+   Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor,
+   Boston, MA 02110-1301, USA.  */
+
+/* As a special exception, you may create a larger work that contains
+   part or all of the Bison parser skeleton and distribute that work
+   under terms of your choice, so long as that work isn't itself a
+   parser generator using the skeleton or a modified version thereof
+   as a parser skeleton.  Alternatively, if you modify or redistribute
+   the parser skeleton itself, you may (at your option) remove this
+   special exception, which will cause the skeleton and the resulting
+   Bison output files to be licensed under the GNU General Public
+   License without this special exception.
+
+   This special exception was added by the Free Software Foundation in
+   version 2.2 of Bison.  */
+
+/* C LALR(1) parser skeleton written by Richard Stallman, by
+   simplifying the original so-called "semantic" parser.  */
+
+/* All symbols defined below should begin with yy or YY, to avoid
+   infringing on user name space.  This should be done even for local
+   variables, as they might otherwise be expanded by user macros.
+   There are some unavoidable exceptions within include files to
+   define necessary library symbols; they are noted "INFRINGES ON
+   USER NAME SPACE" below.  */
+
+/* Identify Bison output.  */
+#define YYBISON 1
+
+/* Bison version.  */
+#define YYBISON_VERSION "2.3"
+
+/* Skeleton name.  */
+#define YYSKELETON_NAME "yacc.c"
+
+/* Pure parsers.  */
+#define YYPURE 0
+
+/* Using locations.  */
+#define YYLSP_NEEDED 1
+
+
+
+/* Tokens.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+   /* Put the tokens into the symbol table, so that GDB and other debuggers
+      know about them.  */
+   enum yytokentype {
+     DT_V1 = 258,
+     DT_MEMRESERVE = 259,
+     DT_PROPNODENAME = 260,
+     DT_LITERAL = 261,
+     DT_LEGACYLITERAL = 262,
+     DT_BASE = 263,
+     DT_BYTE = 264,
+     DT_STRING = 265,
+     DT_LABEL = 266,
+     DT_REF = 267
+   };
+#endif
+/* Tokens.  */
+#define DT_V1 258
+#define DT_MEMRESERVE 259
+#define DT_PROPNODENAME 260
+#define DT_LITERAL 261
+#define DT_LEGACYLITERAL 262
+#define DT_BASE 263
+#define DT_BYTE 264
+#define DT_STRING 265
+#define DT_LABEL 266
+#define DT_REF 267
+
+
+
+
+/* Copy the first part of user declarations.  */
+#line 23 "dtc-parser.y"
+
+#include "dtc.h"
+#include "srcpos.h"
+
+int yylex(void);
+unsigned long long eval_literal(const char *s, int base, int bits);
+
+extern struct boot_info *the_boot_info;
+
+
+
+/* Enabling traces.  */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+
+/* Enabling verbose error messages.  */
+#ifdef YYERROR_VERBOSE
+# undef YYERROR_VERBOSE
+# define YYERROR_VERBOSE 1
+#else
+# define YYERROR_VERBOSE 0
+#endif
+
+/* Enabling the token table.  */
+#ifndef YYTOKEN_TABLE
+# define YYTOKEN_TABLE 0
+#endif
+
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+typedef union YYSTYPE
+#line 34 "dtc-parser.y"
+{
+       char *propnodename;
+       char *literal;
+       char *labelref;
+       unsigned int cbase;
+       u8 byte;
+       struct data data;
+
+       u64 addr;
+       cell_t cell;
+       struct property *prop;
+       struct property *proplist;
+       struct node *node;
+       struct node *nodelist;
+       struct reserve_info *re;
+}
+/* Line 187 of yacc.c.  */
+#line 148 "dtc-parser.tab.c"
+       YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
+typedef struct YYLTYPE
+{
+  int first_line;
+  int first_column;
+  int last_line;
+  int last_column;
+} YYLTYPE;
+# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
+# define YYLTYPE_IS_DECLARED 1
+# define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+
+/* Copy the second part of user declarations.  */
+
+
+/* Line 216 of yacc.c.  */
+#line 173 "dtc-parser.tab.c"
+
+#ifdef short
+# undef short
+#endif
+
+#ifdef YYTYPE_UINT8
+typedef YYTYPE_UINT8 yytype_uint8;
+#else
+typedef unsigned char yytype_uint8;
+#endif
+
+#ifdef YYTYPE_INT8
+typedef YYTYPE_INT8 yytype_int8;
+#elif (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+typedef signed char yytype_int8;
+#else
+typedef short int yytype_int8;
+#endif
+
+#ifdef YYTYPE_UINT16
+typedef YYTYPE_UINT16 yytype_uint16;
+#else
+typedef unsigned short int yytype_uint16;
+#endif
+
+#ifdef YYTYPE_INT16
+typedef YYTYPE_INT16 yytype_int16;
+#else
+typedef short int yytype_int16;
+#endif
+
+#ifndef YYSIZE_T
+# ifdef __SIZE_TYPE__
+#  define YYSIZE_T __SIZE_TYPE__
+# elif defined size_t
+#  define YYSIZE_T size_t
+# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+#  include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+#  define YYSIZE_T size_t
+# else
+#  define YYSIZE_T unsigned int
+# endif
+#endif
+
+#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
+
+#ifndef YY_
+# if YYENABLE_NLS
+#  if ENABLE_NLS
+#   include <libintl.h> /* INFRINGES ON USER NAME SPACE */
+#   define YY_(msgid) dgettext ("bison-runtime", msgid)
+#  endif
+# endif
+# ifndef YY_
+#  define YY_(msgid) msgid
+# endif
+#endif
+
+/* Suppress unused-variable warnings by "using" E.  */
+#if ! defined lint || defined __GNUC__
+# define YYUSE(e) ((void) (e))
+#else
+# define YYUSE(e) /* empty */
+#endif
+
+/* Identity function, used to suppress warnings about constant conditions.  */
+#ifndef lint
+# define YYID(n) (n)
+#else
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static int
+YYID (int i)
+#else
+static int
+YYID (i)
+    int i;
+#endif
+{
+  return i;
+}
+#endif
+
+#if ! defined yyoverflow || YYERROR_VERBOSE
+
+/* The parser invokes alloca or malloc; define the necessary symbols.  */
+
+# ifdef YYSTACK_USE_ALLOCA
+#  if YYSTACK_USE_ALLOCA
+#   ifdef __GNUC__
+#    define YYSTACK_ALLOC __builtin_alloca
+#   elif defined __BUILTIN_VA_ARG_INCR
+#    include <alloca.h> /* INFRINGES ON USER NAME SPACE */
+#   elif defined _AIX
+#    define YYSTACK_ALLOC __alloca
+#   elif defined _MSC_VER
+#    include <malloc.h> /* INFRINGES ON USER NAME SPACE */
+#    define alloca _alloca
+#   else
+#    define YYSTACK_ALLOC alloca
+#    if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+#     include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+#     ifndef _STDLIB_H
+#      define _STDLIB_H 1
+#     endif
+#    endif
+#   endif
+#  endif
+# endif
+
+# ifdef YYSTACK_ALLOC
+   /* Pacify GCC's `empty if-body' warning.  */
+#  define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
+#  ifndef YYSTACK_ALLOC_MAXIMUM
+    /* The OS might guarantee only one guard page at the bottom of the stack,
+       and a page size can be as small as 4096 bytes.  So we cannot safely
+       invoke alloca (N) if N exceeds 4096.  Use a slightly smaller number
+       to allow for a few compiler-allocated temporary stack slots.  */
+#   define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
+#  endif
+# else
+#  define YYSTACK_ALLOC YYMALLOC
+#  define YYSTACK_FREE YYFREE
+#  ifndef YYSTACK_ALLOC_MAXIMUM
+#   define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
+#  endif
+#  if (defined __cplusplus && ! defined _STDLIB_H \
+       && ! ((defined YYMALLOC || defined malloc) \
+            && (defined YYFREE || defined free)))
+#   include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+#   ifndef _STDLIB_H
+#    define _STDLIB_H 1
+#   endif
+#  endif
+#  ifndef YYMALLOC
+#   define YYMALLOC malloc
+#   if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
+#   endif
+#  endif
+#  ifndef YYFREE
+#   define YYFREE free
+#   if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+void free (void *); /* INFRINGES ON USER NAME SPACE */
+#   endif
+#  endif
+# endif
+#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
+
+
+#if (! defined yyoverflow \
+     && (! defined __cplusplus \
+        || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \
+            && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
+
+/* A type that is properly aligned for any stack member.  */
+union yyalloc
+{
+  yytype_int16 yyss;
+  YYSTYPE yyvs;
+    YYLTYPE yyls;
+};
+
+/* The size of the maximum gap between one aligned stack and the next.  */
+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
+
+/* The size of an array large to enough to hold all stacks, each with
+   N elements.  */
+# define YYSTACK_BYTES(N) \
+     ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
+      + 2 * YYSTACK_GAP_MAXIMUM)
+
+/* Copy COUNT objects from FROM to TO.  The source and destination do
+   not overlap.  */
+# ifndef YYCOPY
+#  if defined __GNUC__ && 1 < __GNUC__
+#   define YYCOPY(To, From, Count) \
+      __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+#  else
+#   define YYCOPY(To, From, Count)             \
+      do                                       \
+       {                                       \
+         YYSIZE_T yyi;                         \
+         for (yyi = 0; yyi < (Count); yyi++)   \
+           (To)[yyi] = (From)[yyi];            \
+       }                                       \
+      while (YYID (0))
+#  endif
+# endif
+
+/* Relocate STACK from its old location to the new one.  The
+   local variables YYSIZE and YYSTACKSIZE give the old and new number of
+   elements in the stack, and YYPTR gives the new location of the
+   stack.  Advance YYPTR to a properly aligned location for the next
+   stack.  */
+# define YYSTACK_RELOCATE(Stack)                                       \
+    do                                                                 \
+      {                                                                        \
+       YYSIZE_T yynewbytes;                                            \
+       YYCOPY (&yyptr->Stack, Stack, yysize);                          \
+       Stack = &yyptr->Stack;                                          \
+       yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
+       yyptr += yynewbytes / sizeof (*yyptr);                          \
+      }                                                                        \
+    while (YYID (0))
+
+#endif
+
+/* YYFINAL -- State number of the termination state.  */
+#define YYFINAL  9
+/* YYLAST -- Last index in YYTABLE.  */
+#define YYLAST   60
+
+/* YYNTOKENS -- Number of terminals.  */
+#define YYNTOKENS  24
+/* YYNNTS -- Number of nonterminals.  */
+#define YYNNTS  20
+/* YYNRULES -- Number of rules.  */
+#define YYNRULES  43
+/* YYNRULES -- Number of states.  */
+#define YYNSTATES  67
+
+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
+#define YYUNDEFTOK  2
+#define YYMAXUTOK   267
+
+#define YYTRANSLATE(YYX)                                               \
+  ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
+
+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX.  */
+static const yytype_uint8 yytranslate[] =
+{
+       0,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,    23,    14,     2,    15,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,    13,
+      19,    18,    20,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,    21,     2,    22,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,    16,     2,    17,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
+       5,     6,     7,     8,     9,    10,    11,    12
+};
+
+#if YYDEBUG
+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
+   YYRHS.  */
+static const yytype_uint8 yyprhs[] =
+{
+       0,     0,     3,     8,    11,    12,    15,    21,    22,    25,
+      27,    34,    36,    38,    41,    47,    48,    51,    57,    61,
+      64,    69,    74,    77,    80,    81,    84,    87,    88,    91,
+      94,    97,    98,   100,   102,   105,   106,   109,   112,   113,
+     116,   119,   123,   124
+};
+
+/* YYRHS -- A `-1'-separated list of the rules' RHS.  */
+static const yytype_int8 yyrhs[] =
+{
+      25,     0,    -1,     3,    13,    26,    31,    -1,    28,    31,
+      -1,    -1,    27,    26,    -1,    43,     4,    30,    30,    13,
+      -1,    -1,    29,    28,    -1,    27,    -1,    43,     4,    30,
+      14,    30,    13,    -1,     6,    -1,     7,    -1,    15,    32,
+      -1,    16,    33,    41,    17,    13,    -1,    -1,    33,    34,
+      -1,    43,     5,    18,    35,    13,    -1,    43,     5,    13,
+      -1,    36,    10,    -1,    36,    19,    37,    20,    -1,    36,
+      21,    40,    22,    -1,    36,    12,    -1,    35,    11,    -1,
+      -1,    35,    23,    -1,    36,    11,    -1,    -1,    37,    39,
+      -1,    37,    12,    -1,    37,    11,    -1,    -1,     8,    -1,
+       6,    -1,    38,     7,    -1,    -1,    40,     9,    -1,    40,
+      11,    -1,    -1,    42,    41,    -1,    42,    34,    -1,    43,
+       5,    32,    -1,    -1,    11,    -1
+};
+
+/* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
+static const yytype_uint16 yyrline[] =
+{
+       0,    85,    85,    89,    97,   100,   107,   115,   118,   125,
+     129,   136,   140,   147,   154,   162,   165,   172,   176,   183,
+     187,   191,   195,   199,   207,   210,   214,   222,   225,   229,
+     234,   242,   245,   249,   253,   261,   264,   268,   276,   279,
+     283,   291,   299,   302
+};
+#endif
+
+#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
+/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
+   First, the terminals, then, starting at YYNTOKENS, nonterminals.  */
+static const char *const yytname[] =
+{
+  "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
+  "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
+  "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "';'", "'-'", "'/'", "'{'",
+  "'}'", "'='", "'<'", "'>'", "'['", "']'", "','", "$accept", "sourcefile",
+  "memreserves", "memreserve", "v0_memreserves", "v0_memreserve", "addr",
+  "devicetree", "nodedef", "proplist", "propdef", "propdata",
+  "propdataprefix", "celllist", "cellbase", "cellval", "bytestring",
+  "subnodes", "subnode", "label", 0
+};
+#endif
+
+# ifdef YYPRINT
+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
+   token YYLEX-NUM.  */
+static const yytype_uint16 yytoknum[] =
+{
+       0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
+     265,   266,   267,    59,    45,    47,   123,   125,    61,    60,
+      62,    91,    93,    44
+};
+# endif
+
+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
+static const yytype_uint8 yyr1[] =
+{
+       0,    24,    25,    25,    26,    26,    27,    28,    28,    29,
+      29,    30,    30,    31,    32,    33,    33,    34,    34,    35,
+      35,    35,    35,    35,    36,    36,    36,    37,    37,    37,
+      37,    38,    38,    39,    39,    40,    40,    40,    41,    41,
+      41,    42,    43,    43
+};
+
+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN.  */
+static const yytype_uint8 yyr2[] =
+{
+       0,     2,     4,     2,     0,     2,     5,     0,     2,     1,
+       6,     1,     1,     2,     5,     0,     2,     5,     3,     2,
+       4,     4,     2,     2,     0,     2,     2,     0,     2,     2,
+       2,     0,     1,     1,     2,     0,     2,     2,     0,     2,
+       2,     3,     0,     1
+};
+
+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
+   STATE-NUM when YYTABLE doesn't specify something else to do.  Zero
+   means the default is an error.  */
+static const yytype_uint8 yydefact[] =
+{
+       7,     0,    43,     0,     9,     0,     7,     0,     4,     1,
+       0,     3,     8,     0,     0,     4,     0,    15,    13,    11,
+      12,     0,     2,     5,     0,    38,     0,     0,     0,    16,
+       0,    38,     0,     0,     6,     0,    40,    39,     0,    10,
+      14,    18,    24,    41,     0,     0,    23,    17,    25,    19,
+      26,    22,    27,    35,    31,     0,    33,    32,    30,    29,
+      20,     0,    28,    36,    37,    21,    34
+};
+
+/* YYDEFGOTO[NTERM-NUM].  */
+static const yytype_int8 yydefgoto[] =
+{
+      -1,     3,    14,     4,     5,     6,    27,    11,    18,    25,
+      29,    44,    45,    54,    61,    62,    55,    30,    31,     7
+};
+
+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
+   STATE-NUM.  */
+#define YYPACT_NINF -13
+static const yytype_int8 yypact[] =
+{
+      23,    11,   -13,    37,   -13,    -4,    18,    39,    18,   -13,
+      28,   -13,   -13,    34,    -4,    18,    41,   -13,   -13,   -13,
+     -13,    25,   -13,   -13,    34,    -3,    34,    33,    34,   -13,
+      30,    -3,    43,    36,   -13,    38,   -13,   -13,    20,   -13,
+     -13,   -13,   -13,   -13,     2,     9,   -13,   -13,   -13,   -13,
+     -13,   -13,   -13,   -13,    -2,    -6,   -13,   -13,   -13,   -13,
+     -13,    45,   -13,   -13,   -13,   -13,   -13
+};
+
+/* YYPGOTO[NTERM-NUM].  */
+static const yytype_int8 yypgoto[] =
+{
+     -13,   -13,    35,    27,    47,   -13,   -12,    40,    17,   -13,
+      26,   -13,   -13,   -13,   -13,   -13,   -13,    29,   -13,    -8
+};
+
+/* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
+   positive, shift that token.  If negative, reduce the rule which
+   number is the opposite.  If zero, do what YYDEFACT says.
+   If YYTABLE_NINF, syntax error.  */
+#define YYTABLE_NINF -43
+static const yytype_int8 yytable[] =
+{
+      16,    21,   -42,    63,    56,    64,    57,    16,     2,    58,
+      59,    10,    28,    46,    33,    47,    65,    32,    60,    49,
+      50,    51,   -42,    32,     8,    48,     1,   -42,    52,     2,
+      53,    19,    20,    41,     2,    15,    17,     9,    42,    26,
+      19,    20,    15,    13,    17,    24,    34,    35,    38,    39,
+      23,    40,    66,    12,    22,    43,     0,    36,     0,     0,
+      37
+};
+
+static const yytype_int8 yycheck[] =
+{
+       8,    13,     5,     9,     6,    11,     8,    15,    11,    11,
+      12,    15,    24,    11,    26,    13,    22,    25,    20,    10,
+      11,    12,     4,    31,    13,    23,     3,     4,    19,    11,
+      21,     6,     7,    13,    11,     8,    16,     0,    18,    14,
+       6,     7,    15,     4,    16,     4,    13,    17,     5,    13,
+      15,    13,     7,     6,    14,    38,    -1,    31,    -1,    -1,
+      31
+};
+
+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
+   symbol of state STATE-NUM.  */
+static const yytype_uint8 yystos[] =
+{
+       0,     3,    11,    25,    27,    28,    29,    43,    13,     0,
+      15,    31,    28,     4,    26,    27,    43,    16,    32,     6,
+       7,    30,    31,    26,     4,    33,    14,    30,    30,    34,
+      41,    42,    43,    30,    13,    17,    34,    41,     5,    13,
+      13,    13,    18,    32,    35,    36,    11,    13,    23,    10,
+      11,    12,    19,    21,    37,    40,     6,     8,    11,    12,
+      20,    38,    39,     9,    11,    22,     7
+};
+
+#define yyerrok                (yyerrstatus = 0)
+#define yyclearin      (yychar = YYEMPTY)
+#define YYEMPTY                (-2)
+#define YYEOF          0
+
+#define YYACCEPT       goto yyacceptlab
+#define YYABORT                goto yyabortlab
+#define YYERROR                goto yyerrorlab
+
+
+/* Like YYERROR except do call yyerror.  This remains here temporarily
+   to ease the transition to the new meaning of YYERROR, for GCC.
+   Once GCC version 2 has supplanted version 1, this can go.  */
+
+#define YYFAIL         goto yyerrlab
+
+#define YYRECOVERING()  (!!yyerrstatus)
+
+#define YYBACKUP(Token, Value)                                 \
+do                                                             \
+  if (yychar == YYEMPTY && yylen == 1)                         \
+    {                                                          \
+      yychar = (Token);                                                \
+      yylval = (Value);                                                \
+      yytoken = YYTRANSLATE (yychar);                          \
+      YYPOPSTACK (1);                                          \
+      goto yybackup;                                           \
+    }                                                          \
+  else                                                         \
+    {                                                          \
+      yyerror (YY_("syntax error: cannot back up")); \
+      YYERROR;                                                 \
+    }                                                          \
+while (YYID (0))
+
+
+#define YYTERROR       1
+#define YYERRCODE      256
+
+
+/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
+   If N is 0, then set CURRENT to the empty location which ends
+   the previous symbol: RHS[0] (always defined).  */
+
+#define YYRHSLOC(Rhs, K) ((Rhs)[K])
+#ifndef YYLLOC_DEFAULT
+# define YYLLOC_DEFAULT(Current, Rhs, N)                               \
+    do                                                                 \
+      if (YYID (N))                                                    \
+       {                                                               \
+         (Current).first_line   = YYRHSLOC (Rhs, 1).first_line;        \
+         (Current).first_column = YYRHSLOC (Rhs, 1).first_column;      \
+         (Current).last_line    = YYRHSLOC (Rhs, N).last_line;         \
+         (Current).last_column  = YYRHSLOC (Rhs, N).last_column;       \
+       }                                                               \
+      else                                                             \
+       {                                                               \
+         (Current).first_line   = (Current).last_line   =              \
+           YYRHSLOC (Rhs, 0).last_line;                                \
+         (Current).first_column = (Current).last_column =              \
+           YYRHSLOC (Rhs, 0).last_column;                              \
+       }                                                               \
+    while (YYID (0))
+#endif
+
+
+/* YY_LOCATION_PRINT -- Print the location on the stream.
+   This macro was not mandated originally: define only if we know
+   we won't break user code: when these are the locations we know.  */
+
+#ifndef YY_LOCATION_PRINT
+# if YYLTYPE_IS_TRIVIAL
+#  define YY_LOCATION_PRINT(File, Loc)                 \
+     fprintf (File, "%d.%d-%d.%d",                     \
+             (Loc).first_line, (Loc).first_column,     \
+             (Loc).last_line,  (Loc).last_column)
+# else
+#  define YY_LOCATION_PRINT(File, Loc) ((void) 0)
+# endif
+#endif
+
+
+/* YYLEX -- calling `yylex' with the right arguments.  */
+
+#ifdef YYLEX_PARAM
+# define YYLEX yylex (YYLEX_PARAM)
+#else
+# define YYLEX yylex ()
+#endif
+
+/* Enable debugging if requested.  */
+#if YYDEBUG
+
+# ifndef YYFPRINTF
+#  include <stdio.h> /* INFRINGES ON USER NAME SPACE */
+#  define YYFPRINTF fprintf
+# endif
+
+# define YYDPRINTF(Args)                       \
+do {                                           \
+  if (yydebug)                                 \
+    YYFPRINTF Args;                            \
+} while (YYID (0))
+
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location)                   \
+do {                                                                     \
+  if (yydebug)                                                           \
+    {                                                                    \
+      YYFPRINTF (stderr, "%s ", Title);                                          \
+      yy_symbol_print (stderr,                                           \
+                 Type, Value, Location); \
+      YYFPRINTF (stderr, "\n");                                                  \
+    }                                                                    \
+} while (YYID (0))
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT.  |
+`--------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+#else
+static void
+yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
+    FILE *yyoutput;
+    int yytype;
+    YYSTYPE const * const yyvaluep;
+    YYLTYPE const * const yylocationp;
+#endif
+{
+  if (!yyvaluep)
+    return;
+  YYUSE (yylocationp);
+# ifdef YYPRINT
+  if (yytype < YYNTOKENS)
+    YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
+# else
+  YYUSE (yyoutput);
+# endif
+  switch (yytype)
+    {
+      default:
+       break;
+    }
+}
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT.  |
+`--------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+#else
+static void
+yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
+    FILE *yyoutput;
+    int yytype;
+    YYSTYPE const * const yyvaluep;
+    YYLTYPE const * const yylocationp;
+#endif
+{
+  if (yytype < YYNTOKENS)
+    YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
+  else
+    YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
+
+  YY_LOCATION_PRINT (yyoutput, *yylocationp);
+  YYFPRINTF (yyoutput, ": ");
+  yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp);
+  YYFPRINTF (yyoutput, ")");
+}
+
+/*------------------------------------------------------------------.
+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
+| TOP (included).                                                   |
+`------------------------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static void
+yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
+#else
+static void
+yy_stack_print (bottom, top)
+    yytype_int16 *bottom;
+    yytype_int16 *top;
+#endif
+{
+  YYFPRINTF (stderr, "Stack now");
+  for (; bottom <= top; ++bottom)
+    YYFPRINTF (stderr, " %d", *bottom);
+  YYFPRINTF (stderr, "\n");
+}
+
+# define YY_STACK_PRINT(Bottom, Top)                           \
+do {                                                           \
+  if (yydebug)                                                 \
+    yy_stack_print ((Bottom), (Top));                          \
+} while (YYID (0))
+
+
+/*------------------------------------------------.
+| Report that the YYRULE is going to be reduced.  |
+`------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static void
+yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule)
+#else
+static void
+yy_reduce_print (yyvsp, yylsp, yyrule)
+    YYSTYPE *yyvsp;
+    YYLTYPE *yylsp;
+    int yyrule;
+#endif
+{
+  int yynrhs = yyr2[yyrule];
+  int yyi;
+  unsigned long int yylno = yyrline[yyrule];
+  YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
+            yyrule - 1, yylno);
+  /* The symbols being reduced.  */
+  for (yyi = 0; yyi < yynrhs; yyi++)
+    {
+      fprintf (stderr, "   $%d = ", yyi + 1);
+      yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
+                      &(yyvsp[(yyi + 1) - (yynrhs)])
+                      , &(yylsp[(yyi + 1) - (yynrhs)])                );
+      fprintf (stderr, "\n");
+    }
+}
+
+# define YY_REDUCE_PRINT(Rule)         \
+do {                                   \
+  if (yydebug)                         \
+    yy_reduce_print (yyvsp, yylsp, Rule); \
+} while (YYID (0))
+
+/* Nonzero means print parse trace.  It is left uninitialized so that
+   multiple parsers can coexist.  */
+int yydebug;
+#else /* !YYDEBUG */
+# define YYDPRINTF(Args)
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
+# define YY_STACK_PRINT(Bottom, Top)
+# define YY_REDUCE_PRINT(Rule)
+#endif /* !YYDEBUG */
+
+
+/* YYINITDEPTH -- initial size of the parser's stacks.  */
+#ifndef        YYINITDEPTH
+# define YYINITDEPTH 200
+#endif
+
+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
+   if the built-in stack extension method is used).
+
+   Do not make this value too large; the results are undefined if
+   YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
+   evaluated with infinite-precision integer arithmetic.  */
+
+#ifndef YYMAXDEPTH
+# define YYMAXDEPTH 10000
+#endif
+
+\f
+
+#if YYERROR_VERBOSE
+
+# ifndef yystrlen
+#  if defined __GLIBC__ && defined _STRING_H
+#   define yystrlen strlen
+#  else
+/* Return the length of YYSTR.  */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static YYSIZE_T
+yystrlen (const char *yystr)
+#else
+static YYSIZE_T
+yystrlen (yystr)
+    const char *yystr;
+#endif
+{
+  YYSIZE_T yylen;
+  for (yylen = 0; yystr[yylen]; yylen++)
+    continue;
+  return yylen;
+}
+#  endif
+# endif
+
+# ifndef yystpcpy
+#  if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
+#   define yystpcpy stpcpy
+#  else
+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
+   YYDEST.  */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static char *
+yystpcpy (char *yydest, const char *yysrc)
+#else
+static char *
+yystpcpy (yydest, yysrc)
+    char *yydest;
+    const char *yysrc;
+#endif
+{
+  char *yyd = yydest;
+  const char *yys = yysrc;
+
+  while ((*yyd++ = *yys++) != '\0')
+    continue;
+
+  return yyd - 1;
+}
+#  endif
+# endif
+
+# ifndef yytnamerr
+/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
+   quotes and backslashes, so that it's suitable for yyerror.  The
+   heuristic is that double-quoting is unnecessary unless the string
+   contains an apostrophe, a comma, or backslash (other than
+   backslash-backslash).  YYSTR is taken from yytname.  If YYRES is
+   null, do not copy; instead, return the length of what the result
+   would have been.  */
+static YYSIZE_T
+yytnamerr (char *yyres, const char *yystr)
+{
+  if (*yystr == '"')
+    {
+      YYSIZE_T yyn = 0;
+      char const *yyp = yystr;
+
+      for (;;)
+       switch (*++yyp)
+         {
+         case '\'':
+         case ',':
+           goto do_not_strip_quotes;
+
+         case '\\':
+           if (*++yyp != '\\')
+             goto do_not_strip_quotes;
+           /* Fall through.  */
+         default:
+           if (yyres)
+             yyres[yyn] = *yyp;
+           yyn++;
+           break;
+
+         case '"':
+           if (yyres)
+             yyres[yyn] = '\0';
+           return yyn;
+         }
+    do_not_strip_quotes: ;
+    }
+
+  if (! yyres)
+    return yystrlen (yystr);
+
+  return yystpcpy (yyres, yystr) - yyres;
+}
+# endif
+
+/* Copy into YYRESULT an error message about the unexpected token
+   YYCHAR while in state YYSTATE.  Return the number of bytes copied,
+   including the terminating null byte.  If YYRESULT is null, do not
+   copy anything; just return the number of bytes that would be
+   copied.  As a special case, return 0 if an ordinary "syntax error"
+   message will do.  Return YYSIZE_MAXIMUM if overflow occurs during
+   size calculation.  */
+static YYSIZE_T
+yysyntax_error (char *yyresult, int yystate, int yychar)
+{
+  int yyn = yypact[yystate];
+
+  if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
+    return 0;
+  else
+    {
+      int yytype = YYTRANSLATE (yychar);
+      YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
+      YYSIZE_T yysize = yysize0;
+      YYSIZE_T yysize1;
+      int yysize_overflow = 0;
+      enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
+      char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
+      int yyx;
+
+# if 0
+      /* This is so xgettext sees the translatable formats that are
+        constructed on the fly.  */
+      YY_("syntax error, unexpected %s");
+      YY_("syntax error, unexpected %s, expecting %s");
+      YY_("syntax error, unexpected %s, expecting %s or %s");
+      YY_("syntax error, unexpected %s, expecting %s or %s or %s");
+      YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
+# endif
+      char *yyfmt;
+      char const *yyf;
+      static char const yyunexpected[] = "syntax error, unexpected %s";
+      static char const yyexpecting[] = ", expecting %s";
+      static char const yyor[] = " or %s";
+      char yyformat[sizeof yyunexpected
+                   + sizeof yyexpecting - 1
+                   + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
+                      * (sizeof yyor - 1))];
+      char const *yyprefix = yyexpecting;
+
+      /* Start YYX at -YYN if negative to avoid negative indexes in
+        YYCHECK.  */
+      int yyxbegin = yyn < 0 ? -yyn : 0;
+
+      /* Stay within bounds of both yycheck and yytname.  */
+      int yychecklim = YYLAST - yyn + 1;
+      int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
+      int yycount = 1;
+
+      yyarg[0] = yytname[yytype];
+      yyfmt = yystpcpy (yyformat, yyunexpected);
+
+      for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+       if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+         {
+           if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
+             {
+               yycount = 1;
+               yysize = yysize0;
+               yyformat[sizeof yyunexpected - 1] = '\0';
+               break;
+             }
+           yyarg[yycount++] = yytname[yyx];
+           yysize1 = yysize + yytnamerr (0, yytname[yyx]);
+           yysize_overflow |= (yysize1 < yysize);
+           yysize = yysize1;
+           yyfmt = yystpcpy (yyfmt, yyprefix);
+           yyprefix = yyor;
+         }
+
+      yyf = YY_(yyformat);
+      yysize1 = yysize + yystrlen (yyf);
+      yysize_overflow |= (yysize1 < yysize);
+      yysize = yysize1;
+
+      if (yysize_overflow)
+       return YYSIZE_MAXIMUM;
+
+      if (yyresult)
+       {
+         /* Avoid sprintf, as that infringes on the user's name space.
+            Don't have undefined behavior even if the translation
+            produced a string with the wrong number of "%s"s.  */
+         char *yyp = yyresult;
+         int yyi = 0;
+         while ((*yyp = *yyf) != '\0')
+           {
+             if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
+               {
+                 yyp += yytnamerr (yyp, yyarg[yyi++]);
+                 yyf += 2;
+               }
+             else
+               {
+                 yyp++;
+                 yyf++;
+               }
+           }
+       }
+      return yysize;
+    }
+}
+#endif /* YYERROR_VERBOSE */
+\f
+
+/*-----------------------------------------------.
+| Release the memory associated to this symbol.  |
+`-----------------------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+static void
+yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp)
+#else
+static void
+yydestruct (yymsg, yytype, yyvaluep, yylocationp)
+    const char *yymsg;
+    int yytype;
+    YYSTYPE *yyvaluep;
+    YYLTYPE *yylocationp;
+#endif
+{
+  YYUSE (yyvaluep);
+  YYUSE (yylocationp);
+
+  if (!yymsg)
+    yymsg = "Deleting";
+  YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
+
+  switch (yytype)
+    {
+
+      default:
+       break;
+    }
+}
+\f
+
+/* Prevent warnings from -Wmissing-prototypes.  */
+
+#ifdef YYPARSE_PARAM
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void *YYPARSE_PARAM);
+#else
+int yyparse ();
+#endif
+#else /* ! YYPARSE_PARAM */
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void);
+#else
+int yyparse ();
+#endif
+#endif /* ! YYPARSE_PARAM */
+
+
+
+/* The look-ahead symbol.  */
+int yychar;
+
+/* The semantic value of the look-ahead symbol.  */
+YYSTYPE yylval;
+
+/* Number of syntax errors so far.  */
+int yynerrs;
+/* Location data for the look-ahead symbol.  */
+YYLTYPE yylloc;
+
+
+
+/*----------.
+| yyparse.  |
+`----------*/
+
+#ifdef YYPARSE_PARAM
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void *YYPARSE_PARAM)
+#else
+int
+yyparse (YYPARSE_PARAM)
+    void *YYPARSE_PARAM;
+#endif
+#else /* ! YYPARSE_PARAM */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void)
+#else
+int
+yyparse ()
+
+#endif
+#endif
+{
+  
+  int yystate;
+  int yyn;
+  int yyresult;
+  /* Number of tokens to shift before error messages enabled.  */
+  int yyerrstatus;
+  /* Look-ahead token as an internal (translated) token number.  */
+  int yytoken = 0;
+#if YYERROR_VERBOSE
+  /* Buffer for error messages, and its allocated size.  */
+  char yymsgbuf[128];
+  char *yymsg = yymsgbuf;
+  YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
+#endif
+
+  /* Three stacks and their tools:
+     `yyss': related to states,
+     `yyvs': related to semantic values,
+     `yyls': related to locations.
+
+     Refer to the stacks thru separate pointers, to allow yyoverflow
+     to reallocate them elsewhere.  */
+
+  /* The state stack.  */
+  yytype_int16 yyssa[YYINITDEPTH];
+  yytype_int16 *yyss = yyssa;
+  yytype_int16 *yyssp;
+
+  /* The semantic value stack.  */
+  YYSTYPE yyvsa[YYINITDEPTH];
+  YYSTYPE *yyvs = yyvsa;
+  YYSTYPE *yyvsp;
+
+  /* The location stack.  */
+  YYLTYPE yylsa[YYINITDEPTH];
+  YYLTYPE *yyls = yylsa;
+  YYLTYPE *yylsp;
+  /* The locations where the error started and ended.  */
+  YYLTYPE yyerror_range[2];
+
+#define YYPOPSTACK(N)   (yyvsp -= (N), yyssp -= (N), yylsp -= (N))
+
+  YYSIZE_T yystacksize = YYINITDEPTH;
+
+  /* The variables used to return semantic value and location from the
+     action routines.  */
+  YYSTYPE yyval;
+  YYLTYPE yyloc;
+
+  /* The number of symbols on the RHS of the reduced rule.
+     Keep to zero when no symbol should be popped.  */
+  int yylen = 0;
+
+  YYDPRINTF ((stderr, "Starting parse\n"));
+
+  yystate = 0;
+  yyerrstatus = 0;
+  yynerrs = 0;
+  yychar = YYEMPTY;            /* Cause a token to be read.  */
+
+  /* Initialize stack pointers.
+     Waste one element of value and location stack
+     so that they stay on the same level as the state stack.
+     The wasted elements are never initialized.  */
+
+  yyssp = yyss;
+  yyvsp = yyvs;
+  yylsp = yyls;
+#if YYLTYPE_IS_TRIVIAL
+  /* Initialize the default location before parsing starts.  */
+  yylloc.first_line   = yylloc.last_line   = 1;
+  yylloc.first_column = yylloc.last_column = 0;
+#endif
+
+  goto yysetstate;
+
+/*------------------------------------------------------------.
+| yynewstate -- Push a new state, which is found in yystate.  |
+`------------------------------------------------------------*/
+ yynewstate:
+  /* In all cases, when you get here, the value and location stacks
+     have just been pushed.  So pushing a state here evens the stacks.  */
+  yyssp++;
+
+ yysetstate:
+  *yyssp = yystate;
+
+  if (yyss + yystacksize - 1 <= yyssp)
+    {
+      /* Get the current used size of the three stacks, in elements.  */
+      YYSIZE_T yysize = yyssp - yyss + 1;
+
+#ifdef yyoverflow
+      {
+       /* Give user a chance to reallocate the stack.  Use copies of
+          these so that the &'s don't force the real ones into
+          memory.  */
+       YYSTYPE *yyvs1 = yyvs;
+       yytype_int16 *yyss1 = yyss;
+       YYLTYPE *yyls1 = yyls;
+
+       /* Each stack pointer address is followed by the size of the
+          data in use in that stack, in bytes.  This used to be a
+          conditional around just the two extra args, but that might
+          be undefined if yyoverflow is a macro.  */
+       yyoverflow (YY_("memory exhausted"),
+                   &yyss1, yysize * sizeof (*yyssp),
+                   &yyvs1, yysize * sizeof (*yyvsp),
+                   &yyls1, yysize * sizeof (*yylsp),
+                   &yystacksize);
+       yyls = yyls1;
+       yyss = yyss1;
+       yyvs = yyvs1;
+      }
+#else /* no yyoverflow */
+# ifndef YYSTACK_RELOCATE
+      goto yyexhaustedlab;
+# else
+      /* Extend the stack our own way.  */
+      if (YYMAXDEPTH <= yystacksize)
+       goto yyexhaustedlab;
+      yystacksize *= 2;
+      if (YYMAXDEPTH < yystacksize)
+       yystacksize = YYMAXDEPTH;
+
+      {
+       yytype_int16 *yyss1 = yyss;
+       union yyalloc *yyptr =
+         (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
+       if (! yyptr)
+         goto yyexhaustedlab;
+       YYSTACK_RELOCATE (yyss);
+       YYSTACK_RELOCATE (yyvs);
+       YYSTACK_RELOCATE (yyls);
+#  undef YYSTACK_RELOCATE
+       if (yyss1 != yyssa)
+         YYSTACK_FREE (yyss1);
+      }
+# endif
+#endif /* no yyoverflow */
+
+      yyssp = yyss + yysize - 1;
+      yyvsp = yyvs + yysize - 1;
+      yylsp = yyls + yysize - 1;
+
+      YYDPRINTF ((stderr, "Stack size increased to %lu\n",
+                 (unsigned long int) yystacksize));
+
+      if (yyss + yystacksize - 1 <= yyssp)
+       YYABORT;
+    }
+
+  YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+  goto yybackup;
+
+/*-----------.
+| yybackup.  |
+`-----------*/
+yybackup:
+
+  /* Do appropriate processing given the current state.  Read a
+     look-ahead token if we need one and don't already have one.  */
+
+  /* First try to decide what to do without reference to look-ahead token.  */
+  yyn = yypact[yystate];
+  if (yyn == YYPACT_NINF)
+    goto yydefault;
+
+  /* Not known => get a look-ahead token if don't already have one.  */
+
+  /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol.  */
+  if (yychar == YYEMPTY)
+    {
+      YYDPRINTF ((stderr, "Reading a token: "));
+      yychar = YYLEX;
+    }
+
+  if (yychar <= YYEOF)
+    {
+      yychar = yytoken = YYEOF;
+      YYDPRINTF ((stderr, "Now at end of input.\n"));
+    }
+  else
+    {
+      yytoken = YYTRANSLATE (yychar);
+      YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
+    }
+
+  /* If the proper action on seeing token YYTOKEN is to reduce or to
+     detect an error, take that action.  */
+  yyn += yytoken;
+  if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+    goto yydefault;
+  yyn = yytable[yyn];
+  if (yyn <= 0)
+    {
+      if (yyn == 0 || yyn == YYTABLE_NINF)
+       goto yyerrlab;
+      yyn = -yyn;
+      goto yyreduce;
+    }
+
+  if (yyn == YYFINAL)
+    YYACCEPT;
+
+  /* Count tokens shifted since error; after three, turn off error
+     status.  */
+  if (yyerrstatus)
+    yyerrstatus--;
+
+  /* Shift the look-ahead token.  */
+  YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
+
+  /* Discard the shifted token unless it is eof.  */
+  if (yychar != YYEOF)
+    yychar = YYEMPTY;
+
+  yystate = yyn;
+  *++yyvsp = yylval;
+  *++yylsp = yylloc;
+  goto yynewstate;
+
+
+/*-----------------------------------------------------------.
+| yydefault -- do the default action for the current state.  |
+`-----------------------------------------------------------*/
+yydefault:
+  yyn = yydefact[yystate];
+  if (yyn == 0)
+    goto yyerrlab;
+  goto yyreduce;
+
+
+/*-----------------------------.
+| yyreduce -- Do a reduction.  |
+`-----------------------------*/
+yyreduce:
+  /* yyn is the number of a rule to reduce with.  */
+  yylen = yyr2[yyn];
+
+  /* If YYLEN is nonzero, implement the default value of the action:
+     `$$ = $1'.
+
+     Otherwise, the following line sets YYVAL to garbage.
+     This behavior is undocumented and Bison
+     users should not rely upon it.  Assigning to YYVAL
+     unconditionally makes the parser a bit smaller, and it avoids a
+     GCC warning that YYVAL may be used uninitialized.  */
+  yyval = yyvsp[1-yylen];
+
+  /* Default location.  */
+  YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
+  YY_REDUCE_PRINT (yyn);
+  switch (yyn)
+    {
+        case 2:
+#line 86 "dtc-parser.y"
+    {
+                       the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node));
+               ;}
+    break;
+
+  case 3:
+#line 90 "dtc-parser.y"
+    {
+                       the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node));
+               ;}
+    break;
+
+  case 4:
+#line 97 "dtc-parser.y"
+    {
+                       (yyval.re) = NULL;
+               ;}
+    break;
+
+  case 5:
+#line 101 "dtc-parser.y"
+    {
+                       (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+               ;}
+    break;
+
+  case 6:
+#line 108 "dtc-parser.y"
+    {
+                       (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
+               ;}
+    break;
+
+  case 7:
+#line 115 "dtc-parser.y"
+    {
+                       (yyval.re) = NULL;
+               ;}
+    break;
+
+  case 8:
+#line 119 "dtc-parser.y"
+    {
+                       (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+               ;}
+    break;
+
+  case 9:
+#line 126 "dtc-parser.y"
+    {
+                       (yyval.re) = (yyvsp[(1) - (1)].re);
+               ;}
+    break;
+
+  case 10:
+#line 130 "dtc-parser.y"
+    {
+                       (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
+               ;}
+    break;
+
+  case 11:
+#line 137 "dtc-parser.y"
+    {
+                       (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
+               ;}
+    break;
+
+  case 12:
+#line 141 "dtc-parser.y"
+    {
+                       (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
+               ;}
+    break;
+
+  case 13:
+#line 148 "dtc-parser.y"
+    {
+                       (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
+               ;}
+    break;
+
+  case 14:
+#line 155 "dtc-parser.y"
+    {
+                       (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
+               ;}
+    break;
+
+  case 15:
+#line 162 "dtc-parser.y"
+    {
+                       (yyval.proplist) = NULL;
+               ;}
+    break;
+
+  case 16:
+#line 166 "dtc-parser.y"
+    {
+                       (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
+               ;}
+    break;
+
+  case 17:
+#line 173 "dtc-parser.y"
+    {
+                       (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
+               ;}
+    break;
+
+  case 18:
+#line 177 "dtc-parser.y"
+    {
+                       (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
+               ;}
+    break;
+
+  case 19:
+#line 184 "dtc-parser.y"
+    {
+                       (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
+               ;}
+    break;
+
+  case 20:
+#line 188 "dtc-parser.y"
+    {
+                       (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+               ;}
+    break;
+
+  case 21:
+#line 192 "dtc-parser.y"
+    {
+                       (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+               ;}
+    break;
+
+  case 22:
+#line 196 "dtc-parser.y"
+    {
+                       (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
+               ;}
+    break;
+
+  case 23:
+#line 200 "dtc-parser.y"
+    {
+                       (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+               ;}
+    break;
+
+  case 24:
+#line 207 "dtc-parser.y"
+    {
+                       (yyval.data) = empty_data;
+               ;}
+    break;
+
+  case 25:
+#line 211 "dtc-parser.y"
+    {
+                       (yyval.data) = (yyvsp[(1) - (2)].data);
+               ;}
+    break;
+
+  case 26:
+#line 215 "dtc-parser.y"
+    {
+                       (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+               ;}
+    break;
+
+  case 27:
+#line 222 "dtc-parser.y"
+    {
+                       (yyval.data) = empty_data;
+               ;}
+    break;
+
+  case 28:
+#line 226 "dtc-parser.y"
+    {
+                       (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
+               ;}
+    break;
+
+  case 29:
+#line 230 "dtc-parser.y"
+    {
+                       (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
+                                                             (yyvsp[(2) - (2)].labelref)), -1);
+               ;}
+    break;
+
+  case 30:
+#line 235 "dtc-parser.y"
+    {
+                       (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+               ;}
+    break;
+
+  case 31:
+#line 242 "dtc-parser.y"
+    {
+                       (yyval.cbase) = 16;
+               ;}
+    break;
+
+  case 33:
+#line 250 "dtc-parser.y"
+    {
+                       (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
+               ;}
+    break;
+
+  case 34:
+#line 254 "dtc-parser.y"
+    {
+                       (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
+               ;}
+    break;
+
+  case 35:
+#line 261 "dtc-parser.y"
+    {
+                       (yyval.data) = empty_data;
+               ;}
+    break;
+
+  case 36:
+#line 265 "dtc-parser.y"
+    {
+                       (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
+               ;}
+    break;
+
+  case 37:
+#line 269 "dtc-parser.y"
+    {
+                       (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+               ;}
+    break;
+
+  case 38:
+#line 276 "dtc-parser.y"
+    {
+                       (yyval.nodelist) = NULL;
+               ;}
+    break;
+
+  case 39:
+#line 280 "dtc-parser.y"
+    {
+                       (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
+               ;}
+    break;
+
+  case 40:
+#line 284 "dtc-parser.y"
+    {
+                       yyerror("syntax error: properties must precede subnodes\n");
+                       YYERROR;
+               ;}
+    break;
+
+  case 41:
+#line 292 "dtc-parser.y"
+    {
+                       (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
+               ;}
+    break;
+
+  case 42:
+#line 299 "dtc-parser.y"
+    {
+                       (yyval.labelref) = NULL;
+               ;}
+    break;
+
+  case 43:
+#line 303 "dtc-parser.y"
+    {
+                       (yyval.labelref) = (yyvsp[(1) - (1)].labelref);
+               ;}
+    break;
+
+
+/* Line 1267 of yacc.c.  */
+#line 1734 "dtc-parser.tab.c"
+      default: break;
+    }
+  YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
+
+  YYPOPSTACK (yylen);
+  yylen = 0;
+  YY_STACK_PRINT (yyss, yyssp);
+
+  *++yyvsp = yyval;
+  *++yylsp = yyloc;
+
+  /* Now `shift' the result of the reduction.  Determine what state
+     that goes to, based on the state we popped back to and the rule
+     number reduced by.  */
+
+  yyn = yyr1[yyn];
+
+  yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
+  if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+    yystate = yytable[yystate];
+  else
+    yystate = yydefgoto[yyn - YYNTOKENS];
+
+  goto yynewstate;
+
+
+/*------------------------------------.
+| yyerrlab -- here on detecting error |
+`------------------------------------*/
+yyerrlab:
+  /* If not already recovering from an error, report this error.  */
+  if (!yyerrstatus)
+    {
+      ++yynerrs;
+#if ! YYERROR_VERBOSE
+      yyerror (YY_("syntax error"));
+#else
+      {
+       YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
+       if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
+         {
+           YYSIZE_T yyalloc = 2 * yysize;
+           if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
+             yyalloc = YYSTACK_ALLOC_MAXIMUM;
+           if (yymsg != yymsgbuf)
+             YYSTACK_FREE (yymsg);
+           yymsg = (char *) YYSTACK_ALLOC (yyalloc);
+           if (yymsg)
+             yymsg_alloc = yyalloc;
+           else
+             {
+               yymsg = yymsgbuf;
+               yymsg_alloc = sizeof yymsgbuf;
+             }
+         }
+
+       if (0 < yysize && yysize <= yymsg_alloc)
+         {
+           (void) yysyntax_error (yymsg, yystate, yychar);
+           yyerror (yymsg);
+         }
+       else
+         {
+           yyerror (YY_("syntax error"));
+           if (yysize != 0)
+             goto yyexhaustedlab;
+         }
+      }
+#endif
+    }
+
+  yyerror_range[0] = yylloc;
+
+  if (yyerrstatus == 3)
+    {
+      /* If just tried and failed to reuse look-ahead token after an
+        error, discard it.  */
+
+      if (yychar <= YYEOF)
+       {
+         /* Return failure if at end of input.  */
+         if (yychar == YYEOF)
+           YYABORT;
+       }
+      else
+       {
+         yydestruct ("Error: discarding",
+                     yytoken, &yylval, &yylloc);
+         yychar = YYEMPTY;
+       }
+    }
+
+  /* Else will try to reuse look-ahead token after shifting the error
+     token.  */
+  goto yyerrlab1;
+
+
+/*---------------------------------------------------.
+| yyerrorlab -- error raised explicitly by YYERROR.  |
+`---------------------------------------------------*/
+yyerrorlab:
+
+  /* Pacify compilers like GCC when the user code never invokes
+     YYERROR and the label yyerrorlab therefore never appears in user
+     code.  */
+  if (/*CONSTCOND*/ 0)
+     goto yyerrorlab;
+
+  yyerror_range[0] = yylsp[1-yylen];
+  /* Do not reclaim the symbols of the rule which action triggered
+     this YYERROR.  */
+  YYPOPSTACK (yylen);
+  yylen = 0;
+  YY_STACK_PRINT (yyss, yyssp);
+  yystate = *yyssp;
+  goto yyerrlab1;
+
+
+/*-------------------------------------------------------------.
+| yyerrlab1 -- common code for both syntax error and YYERROR.  |
+`-------------------------------------------------------------*/
+yyerrlab1:
+  yyerrstatus = 3;     /* Each real token shifted decrements this.  */
+
+  for (;;)
+    {
+      yyn = yypact[yystate];
+      if (yyn != YYPACT_NINF)
+       {
+         yyn += YYTERROR;
+         if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
+           {
+             yyn = yytable[yyn];
+             if (0 < yyn)
+               break;
+           }
+       }
+
+      /* Pop the current state because it cannot handle the error token.  */
+      if (yyssp == yyss)
+       YYABORT;
+
+      yyerror_range[0] = *yylsp;
+      yydestruct ("Error: popping",
+                 yystos[yystate], yyvsp, yylsp);
+      YYPOPSTACK (1);
+      yystate = *yyssp;
+      YY_STACK_PRINT (yyss, yyssp);
+    }
+
+  if (yyn == YYFINAL)
+    YYACCEPT;
+
+  *++yyvsp = yylval;
+
+  yyerror_range[1] = yylloc;
+  /* Using YYLLOC is tempting, but would change the location of
+     the look-ahead.  YYLOC is available though.  */
+  YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2);
+  *++yylsp = yyloc;
+
+  /* Shift the error token.  */
+  YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
+
+  yystate = yyn;
+  goto yynewstate;
+
+
+/*-------------------------------------.
+| yyacceptlab -- YYACCEPT comes here.  |
+`-------------------------------------*/
+yyacceptlab:
+  yyresult = 0;
+  goto yyreturn;
+
+/*-----------------------------------.
+| yyabortlab -- YYABORT comes here.  |
+`-----------------------------------*/
+yyabortlab:
+  yyresult = 1;
+  goto yyreturn;
+
+#ifndef yyoverflow
+/*-------------------------------------------------.
+| yyexhaustedlab -- memory exhaustion comes here.  |
+`-------------------------------------------------*/
+yyexhaustedlab:
+  yyerror (YY_("memory exhausted"));
+  yyresult = 2;
+  /* Fall through.  */
+#endif
+
+yyreturn:
+  if (yychar != YYEOF && yychar != YYEMPTY)
+     yydestruct ("Cleanup: discarding lookahead",
+                yytoken, &yylval, &yylloc);
+  /* Do not reclaim the symbols of the rule which action triggered
+     this YYABORT or YYACCEPT.  */
+  YYPOPSTACK (yylen);
+  YY_STACK_PRINT (yyss, yyssp);
+  while (yyssp != yyss)
+    {
+      yydestruct ("Cleanup: popping",
+                 yystos[*yyssp], yyvsp, yylsp);
+      YYPOPSTACK (1);
+    }
+#ifndef yyoverflow
+  if (yyss != yyssa)
+    YYSTACK_FREE (yyss);
+#endif
+#if YYERROR_VERBOSE
+  if (yymsg != yymsgbuf)
+    YYSTACK_FREE (yymsg);
+#endif
+  /* Make sure YYID is used.  */
+  return YYID (yyresult);
+}
+
+
+#line 308 "dtc-parser.y"
+
+
+void yyerror (char const *s)
+{
+       const char *fname = srcpos_filename_for_num(yylloc.filenum);
+
+       if (strcmp(fname, "-") == 0)
+               fname = "stdin";
+
+       fprintf(stderr, "%s:%d %s\n",
+               fname, yylloc.first_line, s);
+}
+
+unsigned long long eval_literal(const char *s, int base, int bits)
+{
+       unsigned long long val;
+       char *e;
+
+       errno = 0;
+       val = strtoull(s, &e, base);
+       if (*e)
+               yyerror("bad characters in literal");
+       else if ((errno == ERANGE)
+                || ((bits < 64) && (val >= (1ULL << bits))))
+               yyerror("literal out of range");
+       else if (errno != 0)
+               yyerror("bad literal");
+       return val;
+}
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped powerpc.git/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
--- linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,111 @@
+/* A Bison parser, made by GNU Bison 2.3.  */
+
+/* Skeleton interface for Bison's Yacc-like parsers in C
+
+   Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+   Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor,
+   Boston, MA 02110-1301, USA.  */
+
+/* As a special exception, you may create a larger work that contains
+   part or all of the Bison parser skeleton and distribute that work
+   under terms of your choice, so long as that work isn't itself a
+   parser generator using the skeleton or a modified version thereof
+   as a parser skeleton.  Alternatively, if you modify or redistribute
+   the parser skeleton itself, you may (at your option) remove this
+   special exception, which will cause the skeleton and the resulting
+   Bison output files to be licensed under the GNU General Public
+   License without this special exception.
+
+   This special exception was added by the Free Software Foundation in
+   version 2.2 of Bison.  */
+
+/* Tokens.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+   /* Put the tokens into the symbol table, so that GDB and other debuggers
+      know about them.  */
+   enum yytokentype {
+     DT_V1 = 258,
+     DT_MEMRESERVE = 259,
+     DT_PROPNODENAME = 260,
+     DT_LITERAL = 261,
+     DT_LEGACYLITERAL = 262,
+     DT_BASE = 263,
+     DT_BYTE = 264,
+     DT_STRING = 265,
+     DT_LABEL = 266,
+     DT_REF = 267
+   };
+#endif
+/* Tokens.  */
+#define DT_V1 258
+#define DT_MEMRESERVE 259
+#define DT_PROPNODENAME 260
+#define DT_LITERAL 261
+#define DT_LEGACYLITERAL 262
+#define DT_BASE 263
+#define DT_BYTE 264
+#define DT_STRING 265
+#define DT_LABEL 266
+#define DT_REF 267
+
+
+
+
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+typedef union YYSTYPE
+#line 34 "dtc-parser.y"
+{
+       char *propnodename;
+       char *literal;
+       char *labelref;
+       unsigned int cbase;
+       u8 byte;
+       struct data data;
+
+       u64 addr;
+       cell_t cell;
+       struct property *prop;
+       struct property *proplist;
+       struct node *node;
+       struct node *nodelist;
+       struct reserve_info *re;
+}
+/* Line 1489 of yacc.c.  */
+#line 90 "dtc-parser.tab.h"
+       YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+extern YYSTYPE yylval;
+
+#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
+typedef struct YYLTYPE
+{
+  int first_line;
+  int first_column;
+  int last_line;
+  int last_column;
+} YYLTYPE;
+# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
+# define YYLTYPE_IS_DECLARED 1
+# define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+extern YYLTYPE yylloc;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-parser.y powerpc.git/arch/powerpc/boot/dtc-src/dtc-parser.y
--- linux-2.6.24/arch/powerpc/boot/dtc-src/dtc-parser.y 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/dtc-parser.y  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,336 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+%locations
+
+%{
+#include "dtc.h"
+#include "srcpos.h"
+
+int yylex(void);
+unsigned long long eval_literal(const char *s, int base, int bits);
+
+extern struct boot_info *the_boot_info;
+
+%}
+
+%union {
+       char *propnodename;
+       char *literal;
+       char *labelref;
+       unsigned int cbase;
+       u8 byte;
+       struct data data;
+
+       u64 addr;
+       cell_t cell;
+       struct property *prop;
+       struct property *proplist;
+       struct node *node;
+       struct node *nodelist;
+       struct reserve_info *re;
+}
+
+%token DT_V1
+%token DT_MEMRESERVE
+%token <propnodename> DT_PROPNODENAME
+%token <literal> DT_LITERAL
+%token <literal> DT_LEGACYLITERAL
+%token <cbase> DT_BASE
+%token <byte> DT_BYTE
+%token <data> DT_STRING
+%token <labelref> DT_LABEL
+%token <labelref> DT_REF
+
+%type <data> propdata
+%type <data> propdataprefix
+%type <re> memreserve
+%type <re> memreserves
+%type <re> v0_memreserve
+%type <re> v0_memreserves
+%type <addr> addr
+%type <data> celllist
+%type <cbase> cellbase
+%type <cell> cellval
+%type <data> bytestring
+%type <prop> propdef
+%type <proplist> proplist
+
+%type <node> devicetree
+%type <node> nodedef
+%type <node> subnode
+%type <nodelist> subnodes
+%type <labelref> label
+
+%%
+
+sourcefile:
+         DT_V1 ';' memreserves devicetree
+               {
+                       the_boot_info = build_boot_info($3, $4);
+               }
+       | v0_memreserves devicetree
+               {
+                       the_boot_info = build_boot_info($1, $2);
+               }
+       ;
+
+memreserves:
+         /* empty */
+               {
+                       $$ = NULL;
+               }
+       | memreserve memreserves
+               {
+                       $$ = chain_reserve_entry($1, $2);
+               }
+       ;
+
+memreserve:
+         label DT_MEMRESERVE addr addr ';'
+               {
+                       $$ = build_reserve_entry($3, $4, $1);
+               }
+       ;
+
+v0_memreserves:
+         /* empty */
+               {
+                       $$ = NULL;
+               }
+       | v0_memreserve v0_memreserves
+               {
+                       $$ = chain_reserve_entry($1, $2);
+               };
+       ;
+
+v0_memreserve:
+         memreserve
+               {
+                       $$ = $1;
+               }
+       | label DT_MEMRESERVE addr '-' addr ';'
+               {
+                       $$ = build_reserve_entry($3, $5 - $3 + 1, $1);
+               }
+       ;
+
+addr:
+         DT_LITERAL
+               {
+                       $$ = eval_literal($1, 0, 64);
+               }
+       | DT_LEGACYLITERAL
+               {
+                       $$ = eval_literal($1, 16, 64);
+               }
+         ;
+
+devicetree:
+         '/' nodedef
+               {
+                       $$ = name_node($2, "", NULL);
+               }
+       ;
+
+nodedef:
+         '{' proplist subnodes '}' ';'
+               {
+                       $$ = build_node($2, $3);
+               }
+       ;
+
+proplist:
+         /* empty */
+               {
+                       $$ = NULL;
+               }
+       | proplist propdef
+               {
+                       $$ = chain_property($2, $1);
+               }
+       ;
+
+propdef:
+         label DT_PROPNODENAME '=' propdata ';'
+               {
+                       $$ = build_property($2, $4, $1);
+               }
+       | label DT_PROPNODENAME ';'
+               {
+                       $$ = build_property($2, empty_data, $1);
+               }
+       ;
+
+propdata:
+         propdataprefix DT_STRING
+               {
+                       $$ = data_merge($1, $2);
+               }
+       | propdataprefix '<' celllist '>'
+               {
+                       $$ = data_merge($1, $3);
+               }
+       | propdataprefix '[' bytestring ']'
+               {
+                       $$ = data_merge($1, $3);
+               }
+       | propdataprefix DT_REF
+               {
+                       $$ = data_add_marker($1, REF_PATH, $2);
+               }
+       | propdata DT_LABEL
+               {
+                       $$ = data_add_marker($1, LABEL, $2);
+               }
+       ;
+
+propdataprefix:
+         /* empty */
+               {
+                       $$ = empty_data;
+               }
+       | propdata ','
+               {
+                       $$ = $1;
+               }
+       | propdataprefix DT_LABEL
+               {
+                       $$ = data_add_marker($1, LABEL, $2);
+               }
+       ;
+
+celllist:
+         /* empty */
+               {
+                       $$ = empty_data;
+               }
+       | celllist cellval
+               {
+                       $$ = data_append_cell($1, $2);
+               }
+       | celllist DT_REF
+               {
+                       $$ = data_append_cell(data_add_marker($1, REF_PHANDLE,
+                                                             $2), -1);
+               }
+       | celllist DT_LABEL
+               {
+                       $$ = data_add_marker($1, LABEL, $2);
+               }
+       ;
+
+cellbase:
+         /* empty */
+               {
+                       $$ = 16;
+               }
+       | DT_BASE
+       ;
+
+cellval:
+         DT_LITERAL
+               {
+                       $$ = eval_literal($1, 0, 32);
+               }
+       | cellbase DT_LEGACYLITERAL
+               {
+                       $$ = eval_literal($2, $1, 32);
+               }
+       ;
+
+bytestring:
+         /* empty */
+               {
+                       $$ = empty_data;
+               }
+       | bytestring DT_BYTE
+               {
+                       $$ = data_append_byte($1, $2);
+               }
+       | bytestring DT_LABEL
+               {
+                       $$ = data_add_marker($1, LABEL, $2);
+               }
+       ;
+
+subnodes:
+         /* empty */
+               {
+                       $$ = NULL;
+               }
+       |  subnode subnodes
+               {
+                       $$ = chain_node($1, $2);
+               }
+       | subnode propdef
+               {
+                       yyerror("syntax error: properties must precede subnodes\n");
+                       YYERROR;
+               }
+       ;
+
+subnode:
+         label DT_PROPNODENAME nodedef
+               {
+                       $$ = name_node($3, $2, $1);
+               }
+       ;
+
+label:
+         /* empty */
+               {
+                       $$ = NULL;
+               }
+       | DT_LABEL
+               {
+                       $$ = $1;
+               }
+       ;
+
+%%
+
+void yyerror (char const *s)
+{
+       const char *fname = srcpos_filename_for_num(yylloc.filenum);
+
+       if (strcmp(fname, "-") == 0)
+               fname = "stdin";
+
+       fprintf(stderr, "%s:%d %s\n",
+               fname, yylloc.first_line, s);
+}
+
+unsigned long long eval_literal(const char *s, int base, int bits)
+{
+       unsigned long long val;
+       char *e;
+
+       errno = 0;
+       val = strtoull(s, &e, base);
+       if (*e)
+               yyerror("bad characters in literal");
+       else if ((errno == ERANGE)
+                || ((bits < 64) && (val >= (1ULL << bits))))
+               yyerror("literal out of range");
+       else if (errno != 0)
+               yyerror("bad literal");
+       return val;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/dtc.c powerpc.git/arch/powerpc/boot/dtc-src/dtc.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/dtc.c        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/dtc.c 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,231 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+#include "version_gen.h"
+
+/*
+ * Command line options
+ */
+int quiet;             /* Level of quietness */
+int reservenum;                /* Number of memory reservation slots */
+int minsize;           /* Minimum blob size */
+int padsize;           /* Additional padding to blob */
+
+char *join_path(const char *path, const char *name)
+{
+       int lenp = strlen(path);
+       int lenn = strlen(name);
+       int len;
+       int needslash = 1;
+       char *str;
+
+       len = lenp + lenn + 2;
+       if ((lenp > 0) && (path[lenp-1] == '/')) {
+               needslash = 0;
+               len--;
+       }
+
+       str = xmalloc(len);
+       memcpy(str, path, lenp);
+       if (needslash) {
+               str[lenp] = '/';
+               lenp++;
+       }
+       memcpy(str+lenp, name, lenn+1);
+       return str;
+}
+
+void fill_fullpaths(struct node *tree, const char *prefix)
+{
+       struct node *child;
+       const char *unit;
+
+       tree->fullpath = join_path(prefix, tree->name);
+
+       unit = strchr(tree->name, '@');
+       if (unit)
+               tree->basenamelen = unit - tree->name;
+       else
+               tree->basenamelen = strlen(tree->name);
+
+       for_each_child(tree, child)
+               fill_fullpaths(child, tree->fullpath);
+}
+
+static void  __attribute__ ((noreturn)) usage(void)
+{
+       fprintf(stderr, "Usage:\n");
+       fprintf(stderr, "\tdtc [options] <input file>\n");
+       fprintf(stderr, "\nOptions:\n");
+       fprintf(stderr, "\t-h\n");
+       fprintf(stderr, "\t\tThis help text\n");
+       fprintf(stderr, "\t-q\n");
+       fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n");
+       fprintf(stderr, "\t-I <input format>\n");
+       fprintf(stderr, "\t\tInput formats are:\n");
+       fprintf(stderr, "\t\t\tdts - device tree source text\n");
+       fprintf(stderr, "\t\t\tdtb - device tree blob\n");
+       fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n");
+       fprintf(stderr, "\t-o <output file>\n");
+       fprintf(stderr, "\t-O <output format>\n");
+       fprintf(stderr, "\t\tOutput formats are:\n");
+       fprintf(stderr, "\t\t\tdts - device tree source text\n");
+       fprintf(stderr, "\t\t\tdtb - device tree blob\n");
+       fprintf(stderr, "\t\t\tasm - assembler source\n");
+       fprintf(stderr, "\t-V <output version>\n");
+       fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION);
+       fprintf(stderr, "\t-R <number>\n");
+       fprintf(stderr, "\t\tMake space for <number> reserve map entries (relevant for \n\t\tdtb and asm output only)\n");
+       fprintf(stderr, "\t-S <bytes>\n");
+       fprintf(stderr, "\t\tMake the blob at least <bytes> long (extra space)\n");
+       fprintf(stderr, "\t-p <bytes>\n");
+       fprintf(stderr, "\t\tAdd padding to the blob of <bytes> long (extra space)\n");
+       fprintf(stderr, "\t-b <number>\n");
+       fprintf(stderr, "\t\tSet the physical boot cpu\n");
+       fprintf(stderr, "\t-f\n");
+       fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
+       fprintf(stderr, "\t-v\n");
+       fprintf(stderr, "\t\tPrint DTC version and exit\n");
+       exit(2);
+}
+
+int main(int argc, char *argv[])
+{
+       struct boot_info *bi;
+       const char *inform = "dts";
+       const char *outform = "dts";
+       const char *outname = "-";
+       int force = 0, check = 0;
+       const char *arg;
+       int opt;
+       FILE *inf = NULL;
+       FILE *outf = NULL;
+       int outversion = DEFAULT_FDT_VERSION;
+       int boot_cpuid_phys = 0xfeedbeef;
+
+       quiet      = 0;
+       reservenum = 0;
+       minsize    = 0;
+       padsize    = 0;
+
+       while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) {
+               switch (opt) {
+               case 'I':
+                       inform = optarg;
+                       break;
+               case 'O':
+                       outform = optarg;
+                       break;
+               case 'o':
+                       outname = optarg;
+                       break;
+               case 'V':
+                       outversion = strtol(optarg, NULL, 0);
+                       break;
+               case 'R':
+                       reservenum = strtol(optarg, NULL, 0);
+                       break;
+               case 'S':
+                       minsize = strtol(optarg, NULL, 0);
+                       break;
+               case 'p':
+                       padsize = strtol(optarg, NULL, 0);
+                       break;
+               case 'f':
+                       force = 1;
+                       break;
+               case 'c':
+                       check = 1;
+                       break;
+               case 'q':
+                       quiet++;
+                       break;
+               case 'b':
+                       boot_cpuid_phys = strtol(optarg, NULL, 0);
+                       break;
+               case 'v':
+                   printf("Version: %s\n", DTC_VERSION);
+                   exit(0);
+               case 'h':
+               default:
+                       usage();
+               }
+       }
+
+       if (argc > (optind+1))
+               usage();
+       else if (argc < (optind+1))
+               arg = "-";
+       else
+               arg = argv[optind];
+
+       /* minsize and padsize are mutually exclusive */
+       if ((minsize) && (padsize)) {
+               die("Can't set both -p and -S\n");
+       }
+
+       fprintf(stderr, "DTC: %s->%s  on file \"%s\"\n",
+               inform, outform, arg);
+
+       if (streq(inform, "dts")) {
+               bi = dt_from_source(arg);
+       } else if (streq(inform, "fs")) {
+               bi = dt_from_fs(arg);
+       } else if(streq(inform, "dtb")) {
+               inf = dtc_open_file(arg);
+               bi = dt_from_blob(inf);
+       } else {
+               die("Unknown input format \"%s\"\n", inform);
+       }
+
+       if (inf && (inf != stdin))
+               fclose(inf);
+
+       if (! bi || ! bi->dt)
+               die("Couldn't read input tree\n");
+
+       process_checks(force, bi, check, outversion, boot_cpuid_phys);
+
+       if (streq(outname, "-")) {
+               outf = stdout;
+       } else {
+               outf = fopen(outname, "w");
+               if (! outf)
+                       die("Couldn't open output file %s: %s\n",
+                           outname, strerror(errno));
+       }
+
+       if (streq(outform, "dts")) {
+               dt_to_source(outf, bi);
+       } else if (streq(outform, "dtb")) {
+               dt_to_blob(outf, bi, outversion, boot_cpuid_phys);
+       } else if (streq(outform, "asm")) {
+               dt_to_asm(outf, bi, outversion, boot_cpuid_phys);
+       } else if (streq(outform, "null")) {
+               /* do nothing */
+       } else {
+               die("Unknown output format \"%s\"\n", outform);
+       }
+
+       exit(0);
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/dtc.h powerpc.git/arch/powerpc/boot/dtc-src/dtc.h
--- linux-2.6.24/arch/powerpc/boot/dtc-src/dtc.h        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/dtc.h 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,269 @@
+#ifndef _DTC_H
+#define _DTC_H
+
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <ctype.h>
+#include <errno.h>
+#include <unistd.h>
+#include <netinet/in.h>
+#include <endian.h>
+#include <byteswap.h>
+
+#include <fdt.h>
+
+#define DEFAULT_FDT_VERSION    17
+/*
+ * Command line options
+ */
+extern int quiet;              /* Level of quietness */
+extern int reservenum;         /* Number of memory reservation slots */
+extern int minsize;            /* Minimum blob size */
+extern int padsize;            /* Additional padding to blob */
+
+static inline void __attribute__((noreturn)) die(char * str, ...)
+{
+       va_list ap;
+
+       va_start(ap, str);
+       fprintf(stderr, "FATAL ERROR: ");
+       vfprintf(stderr, str, ap);
+       exit(1);
+}
+
+static inline void *xmalloc(size_t len)
+{
+       void *new = malloc(len);
+
+       if (! new)
+               die("malloc() failed\n");
+
+       return new;
+}
+
+static inline void *xrealloc(void *p, size_t len)
+{
+       void *new = realloc(p, len);
+
+       if (! new)
+               die("realloc() failed (len=%d)\n", len);
+
+       return new;
+}
+
+typedef uint8_t u8;
+typedef uint16_t u16;
+typedef uint32_t u32;
+typedef uint64_t u64;
+typedef u32 cell_t;
+
+#define cpu_to_be16(x) htons(x)
+#define be16_to_cpu(x) ntohs(x)
+
+#define cpu_to_be32(x) htonl(x)
+#define be32_to_cpu(x) ntohl(x)
+
+#if __BYTE_ORDER == __BIG_ENDIAN
+#define cpu_to_be64(x) (x)
+#define be64_to_cpu(x) (x)
+#else
+#define cpu_to_be64(x) bswap_64(x)
+#define be64_to_cpu(x) bswap_64(x)
+#endif
+
+#define streq(a, b)    (strcmp((a), (b)) == 0)
+#define strneq(a, b, n)        (strncmp((a), (b), (n)) == 0)
+
+#define ALIGN(x, a)    (((x) + (a) - 1) & ~((a) - 1))
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/* Data blobs */
+enum markertype {
+       REF_PHANDLE,
+       REF_PATH,
+       LABEL,
+};
+
+struct  marker {
+       enum markertype type;
+       int offset;
+       char *ref;
+       struct marker *next;
+};
+
+struct data {
+       int len;
+       char *val;
+       int asize;
+       struct marker *markers;
+};
+
+
+#define empty_data ((struct data){ /* all .members = 0 or NULL */ })
+
+#define for_each_marker(m) \
+       for (; (m); (m) = (m)->next)
+#define for_each_marker_of_type(m, t) \
+       for_each_marker(m) \
+               if ((m)->type == (t))
+
+void data_free(struct data d);
+
+struct data data_grow_for(struct data d, int xlen);
+
+struct data data_copy_mem(const char *mem, int len);
+struct data data_copy_escape_string(const char *s, int len);
+struct data data_copy_file(FILE *f, size_t len);
+
+struct data data_append_data(struct data d, const void *p, int len);
+struct data data_insert_at_marker(struct data d, struct marker *m,
+                                 const void *p, int len);
+struct data data_merge(struct data d1, struct data d2);
+struct data data_append_cell(struct data d, cell_t word);
+struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
+struct data data_append_addr(struct data d, u64 addr);
+struct data data_append_byte(struct data d, uint8_t byte);
+struct data data_append_zeroes(struct data d, int len);
+struct data data_append_align(struct data d, int align);
+
+struct data data_add_marker(struct data d, enum markertype type, char *ref);
+
+int data_is_one_string(struct data d);
+
+/* DT constraints */
+
+#define MAX_PROPNAME_LEN       31
+#define MAX_NODENAME_LEN       31
+
+/* Live trees */
+struct property {
+       char *name;
+       struct data val;
+
+       struct property *next;
+
+       char *label;
+};
+
+struct node {
+       char *name;
+       struct property *proplist;
+       struct node *children;
+
+       struct node *parent;
+       struct node *next_sibling;
+
+       char *fullpath;
+       int basenamelen;
+
+       cell_t phandle;
+       int addr_cells, size_cells;
+
+       char *label;
+};
+
+#define for_each_property(n, p) \
+       for ((p) = (n)->proplist; (p); (p) = (p)->next)
+
+#define for_each_child(n, c)   \
+       for ((c) = (n)->children; (c); (c) = (c)->next_sibling)
+
+struct property *build_property(char *name, struct data val, char *label);
+struct property *chain_property(struct property *first, struct property *list);
+struct property *reverse_properties(struct property *first);
+
+struct node *build_node(struct property *proplist, struct node *children);
+struct node *name_node(struct node *node, char *name, char *label);
+struct node *chain_node(struct node *first, struct node *list);
+
+void add_property(struct node *node, struct property *prop);
+void add_child(struct node *parent, struct node *child);
+
+const char *get_unitname(struct node *node);
+struct property *get_property(struct node *node, const char *propname);
+cell_t propval_cell(struct property *prop);
+struct node *get_subnode(struct node *node, const char *nodename);
+struct node *get_node_by_path(struct node *tree, const char *path);
+struct node *get_node_by_label(struct node *tree, const char *label);
+struct node *get_node_by_phandle(struct node *tree, cell_t phandle);
+struct node *get_node_by_ref(struct node *tree, const char *ref);
+cell_t get_node_phandle(struct node *root, struct node *node);
+
+/* Boot info (tree plus memreserve information */
+
+struct reserve_info {
+       struct fdt_reserve_entry re;
+
+       struct reserve_info *next;
+
+       char *label;
+};
+
+struct reserve_info *build_reserve_entry(u64 start, u64 len, char *label);
+struct reserve_info *chain_reserve_entry(struct reserve_info *first,
+                                        struct reserve_info *list);
+struct reserve_info *add_reserve_entry(struct reserve_info *list,
+                                      struct reserve_info *new);
+
+
+struct boot_info {
+       struct reserve_info *reservelist;
+       struct node *dt;                /* the device tree */
+};
+
+struct boot_info *build_boot_info(struct reserve_info *reservelist,
+                                 struct node *tree);
+
+/* Checks */
+
+void process_checks(int force, struct boot_info *bi,
+                   int checkflag, int outversion, int boot_cpuid_phys);
+
+/* Flattened trees */
+
+void dt_to_blob(FILE *f, struct boot_info *bi, int version,
+               int boot_cpuid_phys);
+void dt_to_asm(FILE *f, struct boot_info *bi, int version,
+              int boot_cpuid_phys);
+
+struct boot_info *dt_from_blob(FILE *f);
+
+/* Tree source */
+
+void dt_to_source(FILE *f, struct boot_info *bi);
+struct boot_info *dt_from_source(const char *f);
+
+/* FS trees */
+
+struct boot_info *dt_from_fs(const char *dirname);
+
+/* misc */
+
+char *join_path(const char *path, const char *name);
+void fill_fullpaths(struct node *tree, const char *prefix);
+
+#endif /* _DTC_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/flattree.c powerpc.git/arch/powerpc/boot/dtc-src/flattree.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/flattree.c   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/flattree.c    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,968 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+
+#define FTF_FULLPATH   0x1
+#define FTF_VARALIGN   0x2
+#define FTF_NAMEPROPS  0x4
+#define FTF_BOOTCPUID  0x8
+#define FTF_STRTABSIZE 0x10
+#define FTF_STRUCTSIZE 0x20
+#define FTF_NOPS       0x40
+
+static struct version_info {
+       int version;
+       int last_comp_version;
+       int hdr_size;
+       int flags;
+} version_table[] = {
+       {1, 1, FDT_V1_SIZE,
+        FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS},
+       {2, 1, FDT_V2_SIZE,
+        FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID},
+       {3, 1, FDT_V3_SIZE,
+        FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE},
+       {16, 16, FDT_V3_SIZE,
+        FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS},
+       {17, 16, FDT_V17_SIZE,
+        FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS},
+};
+
+struct emitter {
+       void (*cell)(void *, cell_t);
+       void (*string)(void *, char *, int);
+       void (*align)(void *, int);
+       void (*data)(void *, struct data);
+       void (*beginnode)(void *, const char *);
+       void (*endnode)(void *, const char *);
+       void (*property)(void *, const char *);
+};
+
+static void bin_emit_cell(void *e, cell_t val)
+{
+       struct data *dtbuf = e;
+
+       *dtbuf = data_append_cell(*dtbuf, val);
+}
+
+static void bin_emit_string(void *e, char *str, int len)
+{
+       struct data *dtbuf = e;
+
+       if (len == 0)
+               len = strlen(str);
+
+       *dtbuf = data_append_data(*dtbuf, str, len);
+       *dtbuf = data_append_byte(*dtbuf, '\0');
+}
+
+static void bin_emit_align(void *e, int a)
+{
+       struct data *dtbuf = e;
+
+       *dtbuf = data_append_align(*dtbuf, a);
+}
+
+static void bin_emit_data(void *e, struct data d)
+{
+       struct data *dtbuf = e;
+
+       *dtbuf = data_append_data(*dtbuf, d.val, d.len);
+}
+
+static void bin_emit_beginnode(void *e, const char *label)
+{
+       bin_emit_cell(e, FDT_BEGIN_NODE);
+}
+
+static void bin_emit_endnode(void *e, const char *label)
+{
+       bin_emit_cell(e, FDT_END_NODE);
+}
+
+static void bin_emit_property(void *e, const char *label)
+{
+       bin_emit_cell(e, FDT_PROP);
+}
+
+static struct emitter bin_emitter = {
+       .cell = bin_emit_cell,
+       .string = bin_emit_string,
+       .align = bin_emit_align,
+       .data = bin_emit_data,
+       .beginnode = bin_emit_beginnode,
+       .endnode = bin_emit_endnode,
+       .property = bin_emit_property,
+};
+
+static void emit_label(FILE *f, const char *prefix, const char *label)
+{
+       fprintf(f, "\t.globl\t%s_%s\n", prefix, label);
+       fprintf(f, "%s_%s:\n", prefix, label);
+       fprintf(f, "_%s_%s:\n", prefix, label);
+}
+
+static void emit_offset_label(FILE *f, const char *label, int offset)
+{
+       fprintf(f, "\t.globl\t%s\n", label);
+       fprintf(f, "%s\t= . + %d\n", label, offset);
+}
+
+static void asm_emit_cell(void *e, cell_t val)
+{
+       FILE *f = e;
+
+       fprintf(f, "\t.long\t0x%x\n", val);
+}
+
+static void asm_emit_string(void *e, char *str, int len)
+{
+       FILE *f = e;
+       char c = 0;
+
+       if (len != 0) {
+               /* XXX: ewww */
+               c = str[len];
+               str[len] = '\0';
+       }
+
+       fprintf(f, "\t.string\t\"%s\"\n", str);
+
+       if (len != 0) {
+               str[len] = c;
+       }
+}
+
+static void asm_emit_align(void *e, int a)
+{
+       FILE *f = e;
+
+       fprintf(f, "\t.balign\t%d\n", a);
+}
+
+static void asm_emit_data(void *e, struct data d)
+{
+       FILE *f = e;
+       int off = 0;
+       struct marker *m;
+
+       m = d.markers;
+       while (m) {
+               if (m->type == LABEL)
+                       emit_offset_label(f, m->ref, m->offset);
+               m = m->next;
+       }
+
+       while ((d.len - off) >= sizeof(u32)) {
+               fprintf(f, "\t.long\t0x%x\n",
+                       be32_to_cpu(*((u32 *)(d.val+off))));
+               off += sizeof(u32);
+       }
+
+       if ((d.len - off) >= sizeof(u16)) {
+               fprintf(f, "\t.short\t0x%hx\n",
+                       be16_to_cpu(*((u16 *)(d.val+off))));
+               off += sizeof(u16);
+       }
+
+       if ((d.len - off) >= 1) {
+               fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]);
+               off += 1;
+       }
+
+       assert(off == d.len);
+}
+
+static void asm_emit_beginnode(void *e, const char *label)
+{
+       FILE *f = e;
+
+       if (label) {
+               fprintf(f, "\t.globl\t%s\n", label);
+               fprintf(f, "%s:\n", label);
+       }
+       fprintf(f, "\t.long\tFDT_BEGIN_NODE\n");
+}
+
+static void asm_emit_endnode(void *e, const char *label)
+{
+       FILE *f = e;
+
+       fprintf(f, "\t.long\tFDT_END_NODE\n");
+       if (label) {
+               fprintf(f, "\t.globl\t%s_end\n", label);
+               fprintf(f, "%s_end:\n", label);
+       }
+}
+
+static void asm_emit_property(void *e, const char *label)
+{
+       FILE *f = e;
+
+       if (label) {
+               fprintf(f, "\t.globl\t%s\n", label);
+               fprintf(f, "%s:\n", label);
+       }
+       fprintf(f, "\t.long\tFDT_PROP\n");
+}
+
+static struct emitter asm_emitter = {
+       .cell = asm_emit_cell,
+       .string = asm_emit_string,
+       .align = asm_emit_align,
+       .data = asm_emit_data,
+       .beginnode = asm_emit_beginnode,
+       .endnode = asm_emit_endnode,
+       .property = asm_emit_property,
+};
+
+static int stringtable_insert(struct data *d, const char *str)
+{
+       int i;
+
+       /* FIXME: do this more efficiently? */
+
+       for (i = 0; i < d->len; i++) {
+               if (streq(str, d->val + i))
+                       return i;
+       }
+
+       *d = data_append_data(*d, str, strlen(str)+1);
+       return i;
+}
+
+static void flatten_tree(struct node *tree, struct emitter *emit,
+                        void *etarget, struct data *strbuf,
+                        struct version_info *vi)
+{
+       struct property *prop;
+       struct node *child;
+       int seen_name_prop = 0;
+
+       emit->beginnode(etarget, tree->label);
+
+       if (vi->flags & FTF_FULLPATH)
+               emit->string(etarget, tree->fullpath, 0);
+       else
+               emit->string(etarget, tree->name, 0);
+
+       emit->align(etarget, sizeof(cell_t));
+
+       for_each_property(tree, prop) {
+               int nameoff;
+
+               if (streq(prop->name, "name"))
+                       seen_name_prop = 1;
+
+               nameoff = stringtable_insert(strbuf, prop->name);
+
+               emit->property(etarget, prop->label);
+               emit->cell(etarget, prop->val.len);
+               emit->cell(etarget, nameoff);
+
+               if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8))
+                       emit->align(etarget, 8);
+
+               emit->data(etarget, prop->val);
+               emit->align(etarget, sizeof(cell_t));
+       }
+
+       if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) {
+               emit->property(etarget, NULL);
+               emit->cell(etarget, tree->basenamelen+1);
+               emit->cell(etarget, stringtable_insert(strbuf, "name"));
+
+               if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8))
+                       emit->align(etarget, 8);
+
+               emit->string(etarget, tree->name, tree->basenamelen);
+               emit->align(etarget, sizeof(cell_t));
+       }
+
+       for_each_child(tree, child) {
+               flatten_tree(child, emit, etarget, strbuf, vi);
+       }
+
+       emit->endnode(etarget, tree->label);
+}
+
+static struct data flatten_reserve_list(struct reserve_info *reservelist,
+                                struct version_info *vi)
+{
+       struct reserve_info *re;
+       struct data d = empty_data;
+       static struct fdt_reserve_entry null_re = {0,0};
+       int    j;
+
+       for (re = reservelist; re; re = re->next) {
+               d = data_append_re(d, &re->re);
+       }
+       /*
+        * Add additional reserved slots if the user asked for them.
+        */
+       for (j = 0; j < reservenum; j++) {
+               d = data_append_re(d, &null_re);
+       }
+
+       return d;
+}
+
+static void make_fdt_header(struct fdt_header *fdt,
+                           struct version_info *vi,
+                           int reservesize, int dtsize, int strsize,
+                           int boot_cpuid_phys)
+{
+       int reserve_off;
+
+       reservesize += sizeof(struct fdt_reserve_entry);
+
+       memset(fdt, 0xff, sizeof(*fdt));
+
+       fdt->magic = cpu_to_be32(FDT_MAGIC);
+       fdt->version = cpu_to_be32(vi->version);
+       fdt->last_comp_version = cpu_to_be32(vi->last_comp_version);
+
+       /* Reserve map should be doubleword aligned */
+       reserve_off = ALIGN(vi->hdr_size, 8);
+
+       fdt->off_mem_rsvmap = cpu_to_be32(reserve_off);
+       fdt->off_dt_struct = cpu_to_be32(reserve_off + reservesize);
+       fdt->off_dt_strings = cpu_to_be32(reserve_off + reservesize
+                                         + dtsize);
+       fdt->totalsize = cpu_to_be32(reserve_off + reservesize + dtsize + strsize);
+
+       if (vi->flags & FTF_BOOTCPUID)
+               fdt->boot_cpuid_phys = cpu_to_be32(boot_cpuid_phys);
+       if (vi->flags & FTF_STRTABSIZE)
+               fdt->size_dt_strings = cpu_to_be32(strsize);
+       if (vi->flags & FTF_STRUCTSIZE)
+               fdt->size_dt_struct = cpu_to_be32(dtsize);
+}
+
+void dt_to_blob(FILE *f, struct boot_info *bi, int version,
+               int boot_cpuid_phys)
+{
+       struct version_info *vi = NULL;
+       int i;
+       struct data blob       = empty_data;
+       struct data reservebuf = empty_data;
+       struct data dtbuf      = empty_data;
+       struct data strbuf     = empty_data;
+       struct fdt_header fdt;
+       int padlen = 0;
+
+       for (i = 0; i < ARRAY_SIZE(version_table); i++) {
+               if (version_table[i].version == version)
+                       vi = &version_table[i];
+       }
+       if (!vi)
+               die("Unknown device tree blob version %d\n", version);
+
+       flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi);
+       bin_emit_cell(&dtbuf, FDT_END);
+
+       reservebuf = flatten_reserve_list(bi->reservelist, vi);
+
+       /* Make header */
+       make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
+                       boot_cpuid_phys);
+
+       /*
+        * If the user asked for more space than is used, adjust the totalsize.
+        */
+       if (minsize > 0) {
+               padlen = minsize - be32_to_cpu(fdt.totalsize);
+               if ((padlen < 0) && (quiet < 1))
+                       fprintf(stderr,
+                               "Warning: blob size %d >= minimum size %d\n",
+                               be32_to_cpu(fdt.totalsize), minsize);
+       }
+
+       if (padsize > 0)
+               padlen = padsize;
+
+       if (padlen > 0) {
+               int tsize = be32_to_cpu(fdt.totalsize);
+               tsize += padlen;
+               fdt.totalsize = cpu_to_be32(tsize);
+       }
+
+       /*
+        * Assemble the blob: start with the header, add with alignment
+        * the reserve buffer, add the reserve map terminating zeroes,
+        * the device tree itself, and finally the strings.
+        */
+       blob = data_append_data(blob, &fdt, sizeof(fdt));
+       blob = data_append_align(blob, 8);
+       blob = data_merge(blob, reservebuf);
+       blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry));
+       blob = data_merge(blob, dtbuf);
+       blob = data_merge(blob, strbuf);
+
+       /*
+        * If the user asked for more space than is used, pad out the blob.
+        */
+       if (padlen > 0)
+               blob = data_append_zeroes(blob, padlen);
+
+       fwrite(blob.val, blob.len, 1, f);
+
+       if (ferror(f))
+               die("Error writing device tree blob: %s\n", strerror(errno));
+
+       /*
+        * data_merge() frees the right-hand element so only the blob
+        * remains to be freed.
+        */
+       data_free(blob);
+}
+
+static void dump_stringtable_asm(FILE *f, struct data strbuf)
+{
+       const char *p;
+       int len;
+
+       p = strbuf.val;
+
+       while (p < (strbuf.val + strbuf.len)) {
+               len = strlen(p);
+               fprintf(f, "\t.string \"%s\"\n", p);
+               p += len+1;
+       }
+}
+
+void dt_to_asm(FILE *f, struct boot_info *bi, int version, int boot_cpuid_phys)
+{
+       struct version_info *vi = NULL;
+       int i;
+       struct data strbuf = empty_data;
+       struct reserve_info *re;
+       const char *symprefix = "dt";
+
+       for (i = 0; i < ARRAY_SIZE(version_table); i++) {
+               if (version_table[i].version == version)
+                       vi = &version_table[i];
+       }
+       if (!vi)
+               die("Unknown device tree blob version %d\n", version);
+
+       fprintf(f, "/* autogenerated by dtc, do not edit */\n\n");
+       fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC);
+       fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE);
+       fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE);
+       fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP);
+       fprintf(f, "#define FDT_END 0x%x\n", FDT_END);
+       fprintf(f, "\n");
+
+       emit_label(f, symprefix, "blob_start");
+       emit_label(f, symprefix, "header");
+       fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n");
+       fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n",
+               symprefix, symprefix);
+       fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n",
+               symprefix, symprefix);
+       fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n",
+               symprefix, symprefix);
+       fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n",
+               symprefix, symprefix);
+       fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version);
+       fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n",
+               vi->last_comp_version);
+
+       if (vi->flags & FTF_BOOTCPUID)
+               fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n",
+                       boot_cpuid_phys);
+
+       if (vi->flags & FTF_STRTABSIZE)
+               fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n",
+                       symprefix, symprefix);
+
+       if (vi->flags & FTF_STRUCTSIZE)
+               fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n",
+                       symprefix, symprefix);
+
+       /*
+        * Reserve map entries.
+        * Align the reserve map to a doubleword boundary.
+        * Each entry is an (address, size) pair of u64 values.
+        * Always supply a zero-sized temination entry.
+        */
+       asm_emit_align(f, 8);
+       emit_label(f, symprefix, "reserve_map");
+
+       fprintf(f, "/* Memory reserve map from source file */\n");
+
+       /*
+        * Use .long on high and low halfs of u64s to avoid .quad
+        * as it appears .quad isn't available in some assemblers.
+        */
+       for (re = bi->reservelist; re; re = re->next) {
+               if (re->label) {
+                       fprintf(f, "\t.globl\t%s\n", re->label);
+                       fprintf(f, "%s:\n", re->label);
+               }
+               fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
+                       (unsigned int)(re->re.address >> 32),
+                       (unsigned int)(re->re.address & 0xffffffff));
+               fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
+                       (unsigned int)(re->re.size >> 32),
+                       (unsigned int)(re->re.size & 0xffffffff));
+       }
+       for (i = 0; i < reservenum; i++) {
+               fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
+       }
+
+       fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
+
+       emit_label(f, symprefix, "struct_start");
+       flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi);
+       fprintf(f, "\t.long\tFDT_END\n");
+       emit_label(f, symprefix, "struct_end");
+
+       emit_label(f, symprefix, "strings_start");
+       dump_stringtable_asm(f, strbuf);
+       emit_label(f, symprefix, "strings_end");
+
+       emit_label(f, symprefix, "blob_end");
+
+       /*
+        * If the user asked for more space than is used, pad it out.
+        */
+       if (minsize > 0) {
+               fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n",
+                       minsize, symprefix, symprefix);
+       }
+       if (padsize > 0) {
+               fprintf(f, "\t.space\t%d, 0\n", padsize);
+       }
+       emit_label(f, symprefix, "blob_abs_end");
+
+       data_free(strbuf);
+}
+
+struct inbuf {
+       char *base, *limit, *ptr;
+};
+
+static void inbuf_init(struct inbuf *inb, void *base, void *limit)
+{
+       inb->base = base;
+       inb->limit = limit;
+       inb->ptr = inb->base;
+}
+
+static void flat_read_chunk(struct inbuf *inb, void *p, int len)
+{
+       if ((inb->ptr + len) > inb->limit)
+               die("Premature end of data parsing flat device tree\n");
+
+       memcpy(p, inb->ptr, len);
+
+       inb->ptr += len;
+}
+
+static u32 flat_read_word(struct inbuf *inb)
+{
+       u32 val;
+
+       assert(((inb->ptr - inb->base) % sizeof(val)) == 0);
+
+       flat_read_chunk(inb, &val, sizeof(val));
+
+       return be32_to_cpu(val);
+}
+
+static void flat_realign(struct inbuf *inb, int align)
+{
+       int off = inb->ptr - inb->base;
+
+       inb->ptr = inb->base + ALIGN(off, align);
+       if (inb->ptr > inb->limit)
+               die("Premature end of data parsing flat device tree\n");
+}
+
+static char *flat_read_string(struct inbuf *inb)
+{
+       int len = 0;
+       const char *p = inb->ptr;
+       char *str;
+
+       do {
+               if (p >= inb->limit)
+                       die("Premature end of data parsing flat device tree\n");
+               len++;
+       } while ((*p++) != '\0');
+
+       str = strdup(inb->ptr);
+
+       inb->ptr += len;
+
+       flat_realign(inb, sizeof(u32));
+
+       return str;
+}
+
+static struct data flat_read_data(struct inbuf *inb, int len)
+{
+       struct data d = empty_data;
+
+       if (len == 0)
+               return empty_data;
+
+       d = data_grow_for(d, len);
+       d.len = len;
+
+       flat_read_chunk(inb, d.val, len);
+
+       flat_realign(inb, sizeof(u32));
+
+       return d;
+}
+
+static char *flat_read_stringtable(struct inbuf *inb, int offset)
+{
+       const char *p;
+
+       p = inb->base + offset;
+       while (1) {
+               if (p >= inb->limit || p < inb->base)
+                       die("String offset %d overruns string table\n",
+                           offset);
+
+               if (*p == '\0')
+                       break;
+
+               p++;
+       }
+
+       return strdup(inb->base + offset);
+}
+
+static struct property *flat_read_property(struct inbuf *dtbuf,
+                                          struct inbuf *strbuf, int flags)
+{
+       u32 proplen, stroff;
+       char *name;
+       struct data val;
+
+       proplen = flat_read_word(dtbuf);
+       stroff = flat_read_word(dtbuf);
+
+       name = flat_read_stringtable(strbuf, stroff);
+
+       if ((flags & FTF_VARALIGN) && (proplen >= 8))
+               flat_realign(dtbuf, 8);
+
+       val = flat_read_data(dtbuf, proplen);
+
+       return build_property(name, val, NULL);
+}
+
+
+static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb)
+{
+       struct reserve_info *reservelist = NULL;
+       struct reserve_info *new;
+       const char *p;
+       struct fdt_reserve_entry re;
+
+       /*
+        * Each entry is a pair of u64 (addr, size) values for 4 cell_t's.
+        * List terminates at an entry with size equal to zero.
+        *
+        * First pass, count entries.
+        */
+       p = inb->ptr;
+       while (1) {
+               flat_read_chunk(inb, &re, sizeof(re));
+               re.address  = be64_to_cpu(re.address);
+               re.size = be64_to_cpu(re.size);
+               if (re.size == 0)
+                       break;
+
+               new = build_reserve_entry(re.address, re.size, NULL);
+               reservelist = add_reserve_entry(reservelist, new);
+       }
+
+       return reservelist;
+}
+
+
+static char *nodename_from_path(const char *ppath, const char *cpath)
+{
+       const char *lslash;
+       int plen;
+
+       lslash = strrchr(cpath, '/');
+       if (! lslash)
+               return NULL;
+
+       plen = lslash - cpath;
+
+       if (streq(cpath, "/") && streq(ppath, ""))
+               return "";
+
+       if ((plen == 0) && streq(ppath, "/"))
+               return strdup(lslash+1);
+
+       if (! strneq(ppath, cpath, plen))
+               return NULL;
+
+       return strdup(lslash+1);
+}
+
+static const char PROPCHAR[] = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789,._+*#?-";
+static const char UNITCHAR[] = "0123456789abcdef,";
+
+static int check_node_name(const char *name)
+{
+       const char *atpos;
+       int basenamelen;
+
+       atpos = strrchr(name, '@');
+
+       if (atpos)
+               basenamelen = atpos - name;
+       else
+               basenamelen = strlen(name);
+
+       if (strspn(name, PROPCHAR) < basenamelen)
+               return -1;
+
+       if (atpos
+           && ((basenamelen + 1 + strspn(atpos+1, UNITCHAR)) < strlen(name)))
+               return -1;
+
+       return basenamelen;
+}
+
+static struct node *unflatten_tree(struct inbuf *dtbuf,
+                                  struct inbuf *strbuf,
+                                  const char *parent_path, int flags)
+{
+       struct node *node;
+       u32 val;
+
+       node = build_node(NULL, NULL);
+
+       if (flags & FTF_FULLPATH) {
+               node->fullpath = flat_read_string(dtbuf);
+               node->name = nodename_from_path(parent_path, node->fullpath);
+
+               if (! node->name)
+                       die("Path \"%s\" is not valid as a child of \"%s\"\n",
+                           node->fullpath, parent_path);
+       } else {
+               node->name = flat_read_string(dtbuf);
+               node->fullpath = join_path(parent_path, node->name);
+       }
+
+       node->basenamelen = check_node_name(node->name);
+       if (node->basenamelen < 0) {
+               fprintf(stderr, "Warning \"%s\" has incorrect format\n", node->name);
+       }
+
+       do {
+               struct property *prop;
+               struct node *child;
+
+               val = flat_read_word(dtbuf);
+               switch (val) {
+               case FDT_PROP:
+                       if (node->children)
+                               fprintf(stderr, "Warning: Flat tree input has "
+                                       "subnodes preceding a property.\n");
+                       prop = flat_read_property(dtbuf, strbuf, flags);
+                       add_property(node, prop);
+                       break;
+
+               case FDT_BEGIN_NODE:
+                       child = unflatten_tree(dtbuf,strbuf, node->fullpath,
+                                              flags);
+                       add_child(node, child);
+                       break;
+
+               case FDT_END_NODE:
+                       break;
+
+               case FDT_END:
+                       die("Premature FDT_END in device tree blob\n");
+                       break;
+
+               case FDT_NOP:
+                       if (!(flags & FTF_NOPS))
+                               fprintf(stderr, "Warning: NOP tag found in flat tree"
+                                       " version <16\n");
+
+                       /* Ignore */
+                       break;
+
+               default:
+                       die("Invalid opcode word %08x in device tree blob\n",
+                           val);
+               }
+       } while (val != FDT_END_NODE);
+
+       return node;
+}
+
+
+struct boot_info *dt_from_blob(FILE *f)
+{
+       u32 magic, totalsize, version, size_str, size_dt;
+       u32 off_dt, off_str, off_mem_rsvmap;
+       int rc;
+       char *blob;
+       struct fdt_header *fdt;
+       char *p;
+       struct inbuf dtbuf, strbuf;
+       struct inbuf memresvbuf;
+       int sizeleft;
+       struct reserve_info *reservelist;
+       struct node *tree;
+       u32 val;
+       int flags = 0;
+
+       rc = fread(&magic, sizeof(magic), 1, f);
+       if (ferror(f))
+               die("Error reading DT blob magic number: %s\n",
+                   strerror(errno));
+       if (rc < 1) {
+               if (feof(f))
+                       die("EOF reading DT blob magic number\n");
+               else
+                       die("Mysterious short read reading magic number\n");
+       }
+
+       magic = be32_to_cpu(magic);
+       if (magic != FDT_MAGIC)
+               die("Blob has incorrect magic number\n");
+
+       rc = fread(&totalsize, sizeof(totalsize), 1, f);
+       if (ferror(f))
+               die("Error reading DT blob size: %s\n", strerror(errno));
+       if (rc < 1) {
+               if (feof(f))
+                       die("EOF reading DT blob size\n");
+               else
+                       die("Mysterious short read reading blob size\n");
+       }
+
+       totalsize = be32_to_cpu(totalsize);
+       if (totalsize < FDT_V1_SIZE)
+               die("DT blob size (%d) is too small\n", totalsize);
+
+       blob = xmalloc(totalsize);
+
+       fdt = (struct fdt_header *)blob;
+       fdt->magic = cpu_to_be32(magic);
+       fdt->totalsize = cpu_to_be32(totalsize);
+
+       sizeleft = totalsize - sizeof(magic) - sizeof(totalsize);
+       p = blob + sizeof(magic)  + sizeof(totalsize);
+
+       while (sizeleft) {
+               if (feof(f))
+                       die("EOF before reading %d bytes of DT blob\n",
+                           totalsize);
+
+               rc = fread(p, 1, sizeleft, f);
+               if (ferror(f))
+                       die("Error reading DT blob: %s\n",
+                           strerror(errno));
+
+               sizeleft -= rc;
+               p += rc;
+       }
+
+       off_dt = be32_to_cpu(fdt->off_dt_struct);
+       off_str = be32_to_cpu(fdt->off_dt_strings);
+       off_mem_rsvmap = be32_to_cpu(fdt->off_mem_rsvmap);
+       version = be32_to_cpu(fdt->version);
+
+       fprintf(stderr, "\tmagic:\t\t\t0x%x\n", magic);
+       fprintf(stderr, "\ttotalsize:\t\t%d\n", totalsize);
+       fprintf(stderr, "\toff_dt_struct:\t\t0x%x\n", off_dt);
+       fprintf(stderr, "\toff_dt_strings:\t\t0x%x\n", off_str);
+       fprintf(stderr, "\toff_mem_rsvmap:\t\t0x%x\n", off_mem_rsvmap);
+       fprintf(stderr, "\tversion:\t\t0x%x\n", version );
+       fprintf(stderr, "\tlast_comp_version:\t0x%x\n",
+               be32_to_cpu(fdt->last_comp_version));
+
+       if (off_mem_rsvmap >= totalsize)
+               die("Mem Reserve structure offset exceeds total size\n");
+
+       if (off_dt >= totalsize)
+               die("DT structure offset exceeds total size\n");
+
+       if (off_str > totalsize)
+               die("String table offset exceeds total size\n");
+
+       if (version >= 2)
+               fprintf(stderr, "\tboot_cpuid_phys:\t0x%x\n",
+                       be32_to_cpu(fdt->boot_cpuid_phys));
+
+       size_str = -1;
+       if (version >= 3) {
+               size_str = be32_to_cpu(fdt->size_dt_strings);
+               fprintf(stderr, "\tsize_dt_strings:\t%d\n", size_str);
+               if (off_str+size_str > totalsize)
+                       die("String table extends past total size\n");
+       }
+
+       if (version >= 17) {
+               size_dt = be32_to_cpu(fdt->size_dt_struct);
+               fprintf(stderr, "\tsize_dt_struct:\t\t%d\n", size_dt);
+               if (off_dt+size_dt > totalsize)
+                       die("Structure block extends past total size\n");
+       }
+
+       if (version < 16) {
+               flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN;
+       } else {
+               flags |= FTF_NOPS;
+       }
+
+       inbuf_init(&memresvbuf,
+                  blob + off_mem_rsvmap, blob + totalsize);
+       inbuf_init(&dtbuf, blob + off_dt, blob + totalsize);
+       if (size_str >= 0)
+               inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
+       else
+               inbuf_init(&strbuf, blob + off_str, blob + totalsize);
+
+       reservelist = flat_read_mem_reserve(&memresvbuf);
+
+       val = flat_read_word(&dtbuf);
+
+       if (val != FDT_BEGIN_NODE)
+               die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val);
+
+       tree = unflatten_tree(&dtbuf, &strbuf, "", flags);
+
+       val = flat_read_word(&dtbuf);
+       if (val != FDT_END)
+               die("Device tree blob doesn't end with FDT_END\n");
+
+       free(blob);
+
+       return build_boot_info(reservelist, tree);
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/fstree.c powerpc.git/arch/powerpc/boot/dtc-src/fstree.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/fstree.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/fstree.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+
+#include <dirent.h>
+#include <sys/stat.h>
+
+static struct node *read_fstree(const char *dirname)
+{
+       DIR *d;
+       struct dirent *de;
+       struct stat st;
+       struct node *tree;
+
+       d = opendir(dirname);
+       if (! d)
+               die("opendir(): %s\n", strerror(errno));
+
+       tree = build_node(NULL, NULL);
+
+       while ((de = readdir(d)) != NULL) {
+               char *tmpnam;
+
+               if (streq(de->d_name, ".")
+                   || streq(de->d_name, ".."))
+                       continue;
+
+               tmpnam = join_path(dirname, de->d_name);
+
+               if (lstat(tmpnam, &st) < 0)
+                       die("stat(%s): %s\n", tmpnam, strerror(errno));
+
+               if (S_ISREG(st.st_mode)) {
+                       struct property *prop;
+                       FILE *pfile;
+
+                       pfile = fopen(tmpnam, "r");
+                       if (! pfile) {
+                               fprintf(stderr,
+                                       "WARNING: Cannot open %s: %s\n",
+                                       tmpnam, strerror(errno));
+                       } else {
+                               prop = build_property(strdup(de->d_name),
+                                                     data_copy_file(pfile,
+                                                                    st.st_size),
+                                                     NULL);
+                               add_property(tree, prop);
+                               fclose(pfile);
+                       }
+               } else if (S_ISDIR(st.st_mode)) {
+                       struct node *newchild;
+
+                       newchild = read_fstree(tmpnam);
+                       newchild = name_node(newchild, strdup(de->d_name),
+                                            NULL);
+                       add_child(tree, newchild);
+               }
+
+               free(tmpnam);
+       }
+
+       return tree;
+}
+
+struct boot_info *dt_from_fs(const char *dirname)
+{
+       struct node *tree;
+
+       tree = read_fstree(dirname);
+       tree = name_node(tree, "", NULL);
+
+       fill_fullpaths(tree, "");
+
+       return build_boot_info(NULL, tree);
+}
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/livetree.c powerpc.git/arch/powerpc/boot/dtc-src/livetree.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/livetree.c   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/livetree.c    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+
+/*
+ * Tree building functions
+ */
+
+struct property *build_property(char *name, struct data val, char *label)
+{
+       struct property *new = xmalloc(sizeof(*new));
+
+       new->name = name;
+       new->val = val;
+
+       new->next = NULL;
+
+       new->label = label;
+
+       return new;
+}
+
+struct property *chain_property(struct property *first, struct property *list)
+{
+       assert(first->next == NULL);
+
+       first->next = list;
+       return first;
+}
+
+struct property *reverse_properties(struct property *first)
+{
+       struct property *p = first;
+       struct property *head = NULL;
+       struct property *next;
+
+       while (p) {
+               next = p->next;
+               p->next = head;
+               head = p;
+               p = next;
+       }
+       return head;
+}
+
+struct node *build_node(struct property *proplist, struct node *children)
+{
+       struct node *new = xmalloc(sizeof(*new));
+       struct node *child;
+
+       memset(new, 0, sizeof(*new));
+
+       new->proplist = reverse_properties(proplist);
+       new->children = children;
+
+       for_each_child(new, child) {
+               child->parent = new;
+       }
+
+       return new;
+}
+
+struct node *name_node(struct node *node, char *name, char * label)
+{
+       assert(node->name == NULL);
+
+       node->name = name;
+
+       node->label = label;
+
+       return node;
+}
+
+struct node *chain_node(struct node *first, struct node *list)
+{
+       assert(first->next_sibling == NULL);
+
+       first->next_sibling = list;
+       return first;
+}
+
+void add_property(struct node *node, struct property *prop)
+{
+       struct property **p;
+
+       prop->next = NULL;
+
+       p = &node->proplist;
+       while (*p)
+               p = &((*p)->next);
+
+       *p = prop;
+}
+
+void add_child(struct node *parent, struct node *child)
+{
+       struct node **p;
+
+       child->next_sibling = NULL;
+
+       p = &parent->children;
+       while (*p)
+               p = &((*p)->next_sibling);
+
+       *p = child;
+}
+
+struct reserve_info *build_reserve_entry(u64 address, u64 size, char *label)
+{
+       struct reserve_info *new = xmalloc(sizeof(*new));
+
+       new->re.address = address;
+       new->re.size = size;
+
+       new->next = NULL;
+
+       new->label = label;
+
+       return new;
+}
+
+struct reserve_info *chain_reserve_entry(struct reserve_info *first,
+                                       struct reserve_info *list)
+{
+       assert(first->next == NULL);
+
+       first->next = list;
+       return first;
+}
+
+struct reserve_info *add_reserve_entry(struct reserve_info *list,
+                                     struct reserve_info *new)
+{
+       struct reserve_info *last;
+
+       new->next = NULL;
+
+       if (! list)
+               return new;
+
+       for (last = list; last->next; last = last->next)
+               ;
+
+       last->next = new;
+
+       return list;
+}
+
+struct boot_info *build_boot_info(struct reserve_info *reservelist,
+                                 struct node *tree)
+{
+       struct boot_info *bi;
+
+       bi = xmalloc(sizeof(*bi));
+       bi->reservelist = reservelist;
+       bi->dt = tree;
+
+       return bi;
+}
+
+/*
+ * Tree accessor functions
+ */
+
+const char *get_unitname(struct node *node)
+{
+       if (node->name[node->basenamelen] == '\0')
+               return "";
+       else
+               return node->name + node->basenamelen + 1;
+}
+
+struct property *get_property(struct node *node, const char *propname)
+{
+       struct property *prop;
+
+       for_each_property(node, prop)
+               if (streq(prop->name, propname))
+                       return prop;
+
+       return NULL;
+}
+
+cell_t propval_cell(struct property *prop)
+{
+       assert(prop->val.len == sizeof(cell_t));
+       return be32_to_cpu(*((cell_t *)prop->val.val));
+}
+
+struct node *get_subnode(struct node *node, const char *nodename)
+{
+       struct node *child;
+
+       for_each_child(node, child)
+               if (streq(child->name, nodename))
+                       return child;
+
+       return NULL;
+}
+
+struct node *get_node_by_path(struct node *tree, const char *path)
+{
+       const char *p;
+       struct node *child;
+
+       if (!path || ! (*path))
+               return tree;
+
+       while (path[0] == '/')
+               path++;
+
+       p = strchr(path, '/');
+
+       for_each_child(tree, child) {
+               if (p && strneq(path, child->name, p-path))
+                       return get_node_by_path(child, p+1);
+               else if (!p && streq(path, child->name))
+                       return child;
+       }
+
+       return NULL;
+}
+
+struct node *get_node_by_label(struct node *tree, const char *label)
+{
+       struct node *child, *node;
+
+       assert(label && (strlen(label) > 0));
+
+       if (tree->label && streq(tree->label, label))
+               return tree;
+
+       for_each_child(tree, child) {
+               node = get_node_by_label(child, label);
+               if (node)
+                       return node;
+       }
+
+       return NULL;
+}
+
+struct node *get_node_by_phandle(struct node *tree, cell_t phandle)
+{
+       struct node *child, *node;
+
+       assert((phandle != 0) && (phandle != -1));
+
+       if (tree->phandle == phandle)
+               return tree;
+
+       for_each_child(tree, child) {
+               node = get_node_by_phandle(child, phandle);
+               if (node)
+                       return node;
+       }
+
+       return NULL;
+}
+
+struct node *get_node_by_ref(struct node *tree, const char *ref)
+{
+       if (ref[0] == '/')
+               return get_node_by_path(tree, ref);
+       else
+               return get_node_by_label(tree, ref);
+}
+
+cell_t get_node_phandle(struct node *root, struct node *node)
+{
+       static cell_t phandle = 1; /* FIXME: ick, static local */
+
+       if ((node->phandle != 0) && (node->phandle != -1))
+               return node->phandle;
+
+       assert(! get_property(node, "linux,phandle"));
+
+       while (get_node_by_phandle(root, phandle))
+               phandle++;
+
+       node->phandle = phandle;
+       add_property(node,
+                    build_property("linux,phandle",
+                                   data_append_cell(empty_data, phandle),
+                                   NULL));
+
+       return node->phandle;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/srcpos.c powerpc.git/arch/powerpc/boot/dtc-src/srcpos.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/srcpos.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/srcpos.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+
+/*
+ * Record the complete unique set of opened file names.
+ * Primarily used to cache source position file names.
+ */
+#define MAX_N_FILE_NAMES       (100)
+
+const char *file_names[MAX_N_FILE_NAMES];
+static int n_file_names = 0;
+
+/*
+ * Like yylineno, this is the current open file pos.
+ */
+
+int srcpos_filenum = -1;
+
+
+
+FILE *dtc_open_file(const char *fname)
+{
+       FILE *f;
+
+       if (lookup_file_name(fname, 1) < 0)
+               die("Too many files opened\n");
+
+       if (streq(fname, "-"))
+               f = stdin;
+       else
+               f = fopen(fname, "r");
+
+       if (! f)
+               die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
+
+       return f;
+}
+
+
+
+/*
+ * Locate and optionally add filename fname in the file_names[] array.
+ *
+ * If the filename is currently not in the array and the boolean
+ * add_it is non-zero, an attempt to add the filename will be made.
+ *
+ * Returns;
+ *    Index [0..MAX_N_FILE_NAMES) where the filename is kept
+ *    -1 if the name can not be recorded
+ */
+
+int lookup_file_name(const char *fname, int add_it)
+{
+       int i;
+
+       for (i = 0; i < n_file_names; i++) {
+               if (strcmp(file_names[i], fname) == 0)
+                       return i;
+       }
+
+       if (add_it) {
+               if (n_file_names < MAX_N_FILE_NAMES) {
+                       file_names[n_file_names] = strdup(fname);
+                       return n_file_names++;
+               }
+       }
+
+       return -1;
+}
+
+
+const char *srcpos_filename_for_num(int filenum)
+{
+       if (0 <= filenum && filenum < n_file_names) {
+               return file_names[filenum];
+       }
+
+       return 0;
+}
+
+
+const char *srcpos_get_filename(void)
+{
+       return srcpos_filename_for_num(srcpos_filenum);
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/srcpos.h powerpc.git/arch/powerpc/boot/dtc-src/srcpos.h
--- linux-2.6.24/arch/powerpc/boot/dtc-src/srcpos.h     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/srcpos.h      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+/*
+ * Augment the standard YYLTYPE with a filenum index into an
+ * array of all opened filenames.
+ */
+
+#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
+typedef struct YYLTYPE {
+    int first_line;
+    int first_column;
+    int last_line;
+    int last_column;
+    int filenum;
+} YYLTYPE;
+
+#define YYLTYPE_IS_DECLARED    1
+#define YYLTYPE_IS_TRIVIAL     1
+#endif
+
+/* Cater to old parser templates. */
+#ifndef YYID
+#define YYID(n)        (n)
+#endif
+
+#define YYLLOC_DEFAULT(Current, Rhs, N)                                        \
+    do                                                                 \
+      if (YYID (N))                                                    \
+       {                                                               \
+         (Current).first_line   = YYRHSLOC (Rhs, 1).first_line;        \
+         (Current).first_column = YYRHSLOC (Rhs, 1).first_column;      \
+         (Current).last_line    = YYRHSLOC (Rhs, N).last_line;         \
+         (Current).last_column  = YYRHSLOC (Rhs, N).last_column;       \
+         (Current).filenum      = YYRHSLOC (Rhs, N).filenum;           \
+       }                                                               \
+      else                                                             \
+       {                                                               \
+         (Current).first_line   = (Current).last_line   =              \
+           YYRHSLOC (Rhs, 0).last_line;                                \
+         (Current).first_column = (Current).last_column =              \
+           YYRHSLOC (Rhs, 0).last_column;                              \
+         (Current).filenum      = YYRHSLOC (Rhs, 0).filenum;           \
+       }                                                               \
+    while (YYID (0))
+
+
+
+extern void yyerror(char const *);
+
+extern int srcpos_filenum;
+
+extern int push_input_file(const char *filename);
+extern int pop_input_file(void);
+
+extern FILE *dtc_open_file(const char *fname);
+extern int lookup_file_name(const char *fname, int add_it);
+extern const char *srcpos_filename_for_num(int filenum);
+const char *srcpos_get_filename(void);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/treesource.c powerpc.git/arch/powerpc/boot/dtc-src/treesource.c
--- linux-2.6.24/arch/powerpc/boot/dtc-src/treesource.c 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/treesource.c  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,275 @@
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation.  2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ *                                                                   USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+extern FILE *yyin;
+extern int yyparse(void);
+extern void yyerror(char const *);
+
+struct boot_info *the_boot_info;
+
+struct boot_info *dt_from_source(const char *fname)
+{
+       the_boot_info = NULL;
+
+       push_input_file(fname);
+
+       if (yyparse() != 0)
+               return NULL;
+
+       fill_fullpaths(the_boot_info->dt, "");
+
+       return the_boot_info;
+}
+
+static void write_prefix(FILE *f, int level)
+{
+       int i;
+
+       for (i = 0; i < level; i++)
+               fputc('\t', f);
+}
+
+int isstring(char c)
+{
+       return (isprint(c)
+               || (c == '\0')
+               || strchr("\a\b\t\n\v\f\r", c));
+}
+
+static void write_propval_string(FILE *f, struct data val)
+{
+       const char *str = val.val;
+       int i;
+       int newchunk = 1;
+       struct marker *m = val.markers;
+
+       assert(str[val.len-1] == '\0');
+
+       for (i = 0; i < (val.len-1); i++) {
+               char c = str[i];
+
+               if (newchunk) {
+                       while (m && (m->offset <= i)) {
+                               if (m->type == LABEL) {
+                                       assert(m->offset == i);
+                                       fprintf(f, "%s: ", m->ref);
+                               }
+                               m = m->next;
+                       }
+                       fprintf(f, "\"");
+                       newchunk = 0;
+               }
+
+               switch (c) {
+               case '\a':
+                       fprintf(f, "\\a");
+                       break;
+               case '\b':
+                       fprintf(f, "\\b");
+                       break;
+               case '\t':
+                       fprintf(f, "\\t");
+                       break;
+               case '\n':
+                       fprintf(f, "\\n");
+                       break;
+               case '\v':
+                       fprintf(f, "\\v");
+                       break;
+               case '\f':
+                       fprintf(f, "\\f");
+                       break;
+               case '\r':
+                       fprintf(f, "\\r");
+                       break;
+               case '\\':
+                       fprintf(f, "\\\\");
+                       break;
+               case '\"':
+                       fprintf(f, "\\\"");
+                       break;
+               case '\0':
+                       fprintf(f, "\", ");
+                       newchunk = 1;
+                       break;
+               default:
+                       if (isprint(c))
+                               fprintf(f, "%c", c);
+                       else
+                               fprintf(f, "\\x%02hhx", c);
+               }
+       }
+       fprintf(f, "\"");
+
+       /* Wrap up any labels at the end of the value */
+       for_each_marker_of_type(m, LABEL) {
+               assert (m->offset == val.len);
+               fprintf(f, " %s:", m->ref);
+       }
+}
+
+static void write_propval_cells(FILE *f, struct data val)
+{
+       void *propend = val.val + val.len;
+       cell_t *cp = (cell_t *)val.val;
+       struct marker *m = val.markers;
+
+       fprintf(f, "<");
+       for (;;) {
+               while (m && (m->offset <= ((char *)cp - val.val))) {
+                       if (m->type == LABEL) {
+                               assert(m->offset == ((char *)cp - val.val));
+                               fprintf(f, "%s: ", m->ref);
+                       }
+                       m = m->next;
+               }
+
+               fprintf(f, "0x%x", be32_to_cpu(*cp++));
+               if ((void *)cp >= propend)
+                       break;
+               fprintf(f, " ");
+       }
+
+       /* Wrap up any labels at the end of the value */
+       for_each_marker_of_type(m, LABEL) {
+               assert (m->offset == val.len);
+               fprintf(f, " %s:", m->ref);
+       }
+       fprintf(f, ">");
+}
+
+static void write_propval_bytes(FILE *f, struct data val)
+{
+       void *propend = val.val + val.len;
+       const char *bp = val.val;
+       struct marker *m = val.markers;
+
+       fprintf(f, "[");
+       for (;;) {
+               while (m && (m->offset == (bp-val.val))) {
+                       if (m->type == LABEL)
+                               fprintf(f, "%s: ", m->ref);
+                       m = m->next;
+               }
+
+               fprintf(f, "%02hhx", *bp++);
+               if ((void *)bp >= propend)
+                       break;
+               fprintf(f, " ");
+       }
+
+       /* Wrap up any labels at the end of the value */
+       for_each_marker_of_type(m, LABEL) {
+               assert (m->offset == val.len);
+               fprintf(f, " %s:", m->ref);
+       }
+       fprintf(f, "]");
+}
+
+static void write_propval(FILE *f, struct property *prop)
+{
+       int len = prop->val.len;
+       const char *p = prop->val.val;
+       struct marker *m = prop->val.markers;
+       int nnotstring = 0, nnul = 0;
+       int nnotstringlbl = 0, nnotcelllbl = 0;
+       int i;
+
+       if (len == 0) {
+               fprintf(f, ";\n");
+               return;
+       }
+
+       for (i = 0; i < len; i++) {
+               if (! isstring(p[i]))
+                       nnotstring++;
+               if (p[i] == '\0')
+                       nnul++;
+       }
+
+       for_each_marker_of_type(m, LABEL) {
+               if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0'))
+                       nnotstringlbl++;
+               if ((m->offset % sizeof(cell_t)) != 0)
+                       nnotcelllbl++;
+       }
+
+       fprintf(f, " = ");
+       if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul))
+           && (nnotstringlbl == 0)) {
+               write_propval_string(f, prop->val);
+       } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) {
+               write_propval_cells(f, prop->val);
+       } else {
+               write_propval_bytes(f, prop->val);
+       }
+
+       fprintf(f, ";\n");
+}
+
+static void write_tree_source_node(FILE *f, struct node *tree, int level)
+{
+       struct property *prop;
+       struct node *child;
+
+       write_prefix(f, level);
+       if (tree->label)
+               fprintf(f, "%s: ", tree->label);
+       if (tree->name && (*tree->name))
+               fprintf(f, "%s {\n", tree->name);
+       else
+               fprintf(f, "/ {\n");
+
+       for_each_property(tree, prop) {
+               write_prefix(f, level+1);
+               if (prop->label)
+                       fprintf(f, "%s: ", prop->label);
+               fprintf(f, "%s", prop->name);
+               write_propval(f, prop);
+       }
+       for_each_child(tree, child) {
+               fprintf(f, "\n");
+               write_tree_source_node(f, child, level+1);
+       }
+       write_prefix(f, level);
+       fprintf(f, "};\n");
+}
+
+
+void dt_to_source(FILE *f, struct boot_info *bi)
+{
+       struct reserve_info *re;
+
+       fprintf(f, "/dts-v1/;\n\n");
+
+       for (re = bi->reservelist; re; re = re->next) {
+               if (re->label)
+                       fprintf(f, "%s: ", re->label);
+               fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n",
+                       (unsigned long long)re->re.address,
+                       (unsigned long long)re->re.size);
+       }
+
+       write_tree_source_node(f, bi->dt, 0);
+}
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dtc-src/version_gen.h powerpc.git/arch/powerpc/boot/dtc-src/version_gen.h
--- linux-2.6.24/arch/powerpc/boot/dtc-src/version_gen.h        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dtc-src/version_gen.h 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1 @@
+#define DTC_VERSION "DTC 1.0.0-gd6f9b62f"
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/adder875-redboot.dts powerpc.git/arch/powerpc/boot/dts/adder875-redboot.dts
--- linux-2.6.24/arch/powerpc/boot/dts/adder875-redboot.dts     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/adder875-redboot.dts      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,184 @@
+/*
+ * Device Tree Source for MPC885 ADS running RedBoot
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+       model = "Analogue & Micro Adder MPC875";
+       compatible = "analogue-and-micro,adder875";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               console = &console;
+               ethernet0 = &eth0;
+               ethernet1 = &eth1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,875@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <16>;
+                       i-cache-line-size = <16>;
+                       d-cache-size = <8192>;
+                       i-cache-size = <8192>;
+                       timebase-frequency = <0>;
+                       bus-frequency = <0>;
+                       clock-frequency = <0>;
+                       interrupts = <15 2>;    // decrementer interrupt
+                       interrupt-parent = <&PIC>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0x01000000>;
+       };
+
+       localbus@fa200100 {
+               compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
+                            "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               reg = <0xfa200100 0x40>;
+
+               ranges = <
+                       0 0 0xfe000000 0x00800000
+                       2 0 0xfa100000 0x00008000
+               >;
+
+               flash@0,0 {
+                       compatible = "cfi-flash";
+                       reg = <0 0 0x800000>;
+                       bank-width = <2>;
+                       device-width = <2>;
+               };
+       };
+
+       soc@fa200000 {
+               compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0 0xfa200000 0x00004000>;
+
+               // Temporary until code stops depending on it.
+               device_type = "soc";
+
+               // Temporary until get_immrbase() is fixed.
+               reg = <0xfa200000 0x4000>;
+
+               mdio@e00 {
+                       compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
+                       reg = <0xe00 0x188>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       PHY0: ethernet-phy@0 {
+                               reg = <0>;
+                               device_type = "ethernet-phy";
+                       };
+
+                       PHY1: ethernet-phy@1 {
+                               reg = <1>;
+                               device_type = "ethernet-phy";
+                       };
+               };
+
+               eth0: ethernet@e00 {
+                       device_type = "network";
+                       compatible = "fsl,mpc875-fec-enet",
+                                    "fsl,pq1-fec-enet";
+                       reg = <0xe00 0x188>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <3 1>;
+                       interrupt-parent = <&PIC>;
+                       phy-handle = <&PHY0>;
+                       linux,network-index = <0>;
+               };
+
+               eth1: ethernet@1e00 {
+                       device_type = "network";
+                       compatible = "fsl,mpc875-fec-enet",
+                                    "fsl,pq1-fec-enet";
+                       reg = <0x1e00 0x188>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <7 1>;
+                       interrupt-parent = <&PIC>;
+                       phy-handle = <&PHY1>;
+                       linux,network-index = <1>;
+               };
+
+               PIC: interrupt-controller@0 {
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       reg = <0 0x24>;
+                       compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
+               };
+
+               cpm@9c0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
+                       interrupts = <0>;       // cpm error interrupt
+                       interrupt-parent = <&CPM_PIC>;
+                       reg = <0x9c0 0x40>;
+                       ranges;
+
+                       muram {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x2000 0x2000>;
+
+                               data@0 {
+                                       compatible = "fsl,cpm-muram-data";
+                                       reg = <0 0x1c00>;
+                               };
+                       };
+
+                       brg@9f0 {
+                               compatible = "fsl,mpc875-brg",
+                                            "fsl,cpm1-brg",
+                                            "fsl,cpm-brg";
+                               reg = <0x9f0 0x10>;
+                       };
+
+                       CPM_PIC: interrupt-controller@930 {
+                               interrupt-controller;
+                               #interrupt-cells = <1>;
+                               interrupts = <5 2 0 2>;
+                               interrupt-parent = <&PIC>;
+                               reg = <0x930 0x20>;
+                               compatible = "fsl,mpc875-cpm-pic",
+                                            "fsl,cpm1-pic";
+                       };
+
+                       console: serial@a80 {
+                               device_type = "serial";
+                               compatible = "fsl,mpc875-smc-uart",
+                                            "fsl,cpm1-smc-uart";
+                               reg = <0xa80 0x10 0x3e80 0x40>;
+                               interrupts = <4>;
+                               interrupt-parent = <&CPM_PIC>;
+                               fsl,cpm-brg = <1>;
+                               fsl,cpm-command = <0x0090>;
+                               current-speed = <115200>;
+                       };
+               };
+       };
+
+       chosen {
+               linux,stdout-path = &console;
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/adder875-uboot.dts powerpc.git/arch/powerpc/boot/dts/adder875-uboot.dts
--- linux-2.6.24/arch/powerpc/boot/dts/adder875-uboot.dts       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/adder875-uboot.dts        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,183 @@
+/*
+ * Device Tree Source for MPC885 ADS running U-Boot
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+       model = "Analogue & Micro Adder MPC875";
+       compatible = "analogue-and-micro,adder875";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               console = &console;
+               ethernet0 = &eth0;
+               ethernet1 = &eth1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,875@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <16>;
+                       i-cache-line-size = <16>;
+                       d-cache-size = <8192>;
+                       i-cache-size = <8192>;
+                       timebase-frequency = <0>;
+                       bus-frequency = <0>;
+                       clock-frequency = <0>;
+                       interrupts = <15 2>;    // decrementer interrupt
+                       interrupt-parent = <&PIC>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0x01000000>;
+       };
+
+       localbus@ff000100 {
+               compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
+                            "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               reg = <0xff000100 0x40>;
+
+               ranges = <
+                       0 0 0xfe000000 0x01000000
+               >;
+
+               flash@0,0 {
+                       compatible = "cfi-flash";
+                       reg = <0 0 0x800000>;
+                       bank-width = <2>;
+                       device-width = <2>;
+               };
+       };
+
+       soc@ff000000 {
+               compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0 0xff000000 0x00004000>;
+
+               // Temporary until code stops depending on it.
+               device_type = "soc";
+
+               // Temporary until get_immrbase() is fixed.
+               reg = <0xff000000 0x4000>;
+
+               mdio@e00 {
+                       compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
+                       reg = <0xe00 0x188>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       PHY0: ethernet-phy@0 {
+                               reg = <0>;
+                               device_type = "ethernet-phy";
+                       };
+
+                       PHY1: ethernet-phy@1 {
+                               reg = <1>;
+                               device_type = "ethernet-phy";
+                       };
+               };
+
+               eth0: ethernet@e00 {
+                       device_type = "network";
+                       compatible = "fsl,mpc875-fec-enet",
+                                    "fsl,pq1-fec-enet";
+                       reg = <0xe00 0x188>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <3 1>;
+                       interrupt-parent = <&PIC>;
+                       phy-handle = <&PHY0>;
+                       linux,network-index = <0>;
+               };
+
+               eth1: ethernet@1e00 {
+                       device_type = "network";
+                       compatible = "fsl,mpc875-fec-enet",
+                                    "fsl,pq1-fec-enet";
+                       reg = <0x1e00 0x188>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <7 1>;
+                       interrupt-parent = <&PIC>;
+                       phy-handle = <&PHY1>;
+                       linux,network-index = <1>;
+               };
+
+               PIC: interrupt-controller@0 {
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       reg = <0 0x24>;
+                       compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
+               };
+
+               cpm@9c0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
+                       interrupts = <0>;       // cpm error interrupt
+                       interrupt-parent = <&CPM_PIC>;
+                       reg = <0x9c0 0x40>;
+                       ranges;
+
+                       muram {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x2000 0x2000>;
+
+                               data@0 {
+                                       compatible = "fsl,cpm-muram-data";
+                                       reg = <0 0x1c00>;
+                               };
+                       };
+
+                       brg@9f0 {
+                               compatible = "fsl,mpc875-brg",
+                                            "fsl,cpm1-brg",
+                                            "fsl,cpm-brg";
+                               reg = <0x9f0 0x10>;
+                       };
+
+                       CPM_PIC: interrupt-controller@930 {
+                               interrupt-controller;
+                               #interrupt-cells = <1>;
+                               interrupts = <5 2 0 2>;
+                               interrupt-parent = <&PIC>;
+                               reg = <0x930 0x20>;
+                               compatible = "fsl,mpc875-cpm-pic",
+                                            "fsl,cpm1-pic";
+                       };
+
+                       console: serial@a80 {
+                               device_type = "serial";
+                               compatible = "fsl,mpc875-smc-uart",
+                                            "fsl,cpm1-smc-uart";
+                               reg = <0xa80 0x10 0x3e80 0x40>;
+                               interrupts = <4>;
+                               interrupt-parent = <&CPM_PIC>;
+                               fsl,cpm-brg = <1>;
+                               fsl,cpm-command = <0x0090>;
+                               current-speed = <115200>;
+                       };
+               };
+       };
+
+       chosen {
+               linux,stdout-path = &console;
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/bamboo.dts powerpc.git/arch/powerpc/boot/dts/bamboo.dts
--- linux-2.6.24/arch/powerpc/boot/dts/bamboo.dts       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/bamboo.dts        2008-01-28 20:25:49.000000000 +0100
@@ -16,14 +16,24 @@
        #size-cells = <1>;
        model = "amcc,bamboo";
        compatible = "amcc,bamboo";
-       dcr-parent = <&/cpus/PowerPC,440EP@0>;
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               ethernet1 = &EMAC1;
+               serial0 = &UART0;
+               serial1 = &UART1;
+               serial2 = &UART2;
+               serial3 = &UART3;
+       };
 
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
 
-               PowerPC,440EP@0 {
+               cpu@0 {
                        device_type = "cpu";
+                       model = "PowerPC,440EP";
                        reg = <0>;
                        clock-frequency = <0>; /* Filled in by zImage */
                        timebase-frequency = <0>; /* Filled in by zImage */
@@ -126,7 +136,6 @@
                                #address-cells = <2>;
                                #size-cells = <1>;
                                clock-frequency = <0>; /* Filled in by zImage */
-                               ranges;
                                interrupts = <5 1>;
                                interrupt-parent = <&UIC1>;
                        };
@@ -238,11 +247,56 @@
                                zmii-device = <&ZMII0>;
                                zmii-channel = <1>;
                        };
+
+                       usb@ef601000 {
+                               compatible = "ohci-be";
+                               reg = <ef601000 80>;
+                               interrupts = <8 1 9 1>;
+                               interrupt-parent = < &UIC1 >;
+                       };
+               };
+
+               PCI0: pci@ec000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+                       primary;
+                       reg = <0 eec00000 8     /* Config space access */
+                              0 eed00000 4     /* IACK */
+                              0 eed00000 4     /* Special cycle */
+                              0 ef400000 40>;  /* Internal registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed. Chip supports a second
+                        * IO range but we don't use it for now
+                        */
+                       ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+                                 01000000 0 00000000 0 e8000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* Bamboo has all 4 IRQ pins tied together per slot */
+                       interrupt-map-mask = <f800 0 0 0>;
+                       interrupt-map = <
+                               /* IDSEL 1 */
+                               0800 0 0 0 &UIC0 1c 8
+
+                               /* IDSEL 2 */
+                               1000 0 0 0 &UIC0 1b 8
+
+                               /* IDSEL 3 */
+                               1800 0 0 0 &UIC0 1a 8
+
+                               /* IDSEL 4 */
+                               2000 0 0 0 &UIC0 19 8
+                       >;
                };
        };
 
        chosen {
                linux,stdout-path = "/plb/opb/serial@ef600300";
-               bootargs = "console=ttyS0,115200";
        };
 };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/cm5200.dts powerpc.git/arch/powerpc/boot/dts/cm5200.dts
--- linux-2.6.24/arch/powerpc/boot/dts/cm5200.dts       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/cm5200.dts        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,236 @@
+/*
+ * CM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+       model = "schindler,cm5200";
+       compatible = "schindler,cm5200";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,5200@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <20>;
+                       i-cache-line-size = <20>;
+                       d-cache-size = <4000>;          // L1, 16K
+                       i-cache-size = <4000>;          // L1, 16K
+                       timebase-frequency = <0>;       // from bootloader
+                       bus-frequency = <0>;            // from bootloader
+                       clock-frequency = <0>;          // from bootloader
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <00000000 04000000>;      // 64MB
+       };
+
+       soc5200@f0000000 {
+               model = "fsl,mpc5200b";
+               compatible = "fsl,mpc5200b";
+               revision = "";                  // from bootloader
+               device_type = "soc";
+               ranges = <0 f0000000 0000c000>;
+               reg = <f0000000 00000100>;
+               bus-frequency = <0>;            // from bootloader
+               system-frequency = <0>;         // from bootloader
+
+               cdm@200 {
+                       compatible = "mpc5200b-cdm","mpc5200-cdm";
+                       reg = <200 38>;
+               };
+
+               mpc5200_pic: pic@500 {
+                       // 5200 interrupts are encoded into two levels;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       compatible = "mpc5200b-pic","mpc5200-pic";
+                       reg = <500 80>;
+               };
+
+               gpt@600 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <600 10>;
+                       interrupts = <1 9 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl,has-wdt;
+               };
+
+               gpt@610 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <610 10>;
+                       interrupts = <1 a 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@620 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <620 10>;
+                       interrupts = <1 b 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@630 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <630 10>;
+                       interrupts = <1 c 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@640 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <640 10>;
+                       interrupts = <1 d 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@650 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <650 10>;
+                       interrupts = <1 e 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@660 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <660 10>;
+                       interrupts = <1 f 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@670 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <670 10>;
+                       interrupts = <1 10 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               rtc@800 {       // Real time clock
+                       compatible = "mpc5200b-rtc","mpc5200-rtc";
+                       reg = <800 100>;
+                       interrupts = <1 5 0 1 6 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpio@b00 {
+                       compatible = "mpc5200b-gpio","mpc5200-gpio";
+                       reg = <b00 40>;
+                       interrupts = <1 7 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpio-wkup@c00 {
+                       compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+                       reg = <c00 40>;
+                       interrupts = <1 8 0 0 3 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               spi@f00 {
+                       compatible = "mpc5200b-spi","mpc5200-spi";
+                       reg = <f00 20>;
+                       interrupts = <2 d 0 2 e 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               usb@1000 {
+                       device_type = "usb-ohci-be";
+                       compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+                       reg = <1000 ff>;
+                       interrupts = <2 6 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               dma-controller@1200 {
+                       compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+                       reg = <1200 80>;
+                       interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+                                     3 4 0  3 5 0  3 6 0  3 7 0
+                                     3 8 0  3 9 0  3 a 0  3 b 0
+                                     3 c 0  3 d 0  3 e 0  3 f 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               xlb@1f00 {
+                       compatible = "mpc5200b-xlb","mpc5200-xlb";
+                       reg = <1f00 100>;
+               };
+
+               serial@2000 {           // PSC1
+                       device_type = "serial";
+                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       port-number = <0>;  // Logical port assignment
+                       reg = <2000 100>;
+                       interrupts = <2 1 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2200 {           // PSC2
+                       device_type = "serial";
+                       compatible = "mpc5200-psc-uart";
+                       port-number = <1>;  // Logical port assignment
+                       reg = <2200 100>;
+                       interrupts = <2 2 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2400 {           // PSC3
+                       device_type = "serial";
+                       compatible = "mpc5200-psc-uart";
+                       port-number = <2>;  // Logical port assignment
+                       reg = <2400 100>;
+                       interrupts = <2 3 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2c00 {           // PSC6
+                       device_type = "serial";
+                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       port-number = <5>;  // Logical port assignment
+                       reg = <2c00 100>;
+                       interrupts = <2 4 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               ethernet@3000 {
+                       device_type = "network";
+                       compatible = "mpc5200b-fec","mpc5200-fec";
+                       reg = <3000 800>;
+                       local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+                       interrupts = <2 5 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               i2c@3d40 {
+                       compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+                       reg = <3d40 40>;
+                       interrupts = <2 10 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl5200-clocking;
+               };
+
+               sram@8000 {
+                       compatible = "mpc5200b-sram","mpc5200-sram";
+                       reg = <8000 4000>;
+               };
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/ebony.dts powerpc.git/arch/powerpc/boot/dts/ebony.dts
--- linux-2.6.24/arch/powerpc/boot/dts/ebony.dts        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/ebony.dts 2008-01-28 20:25:49.000000000 +0100
@@ -16,14 +16,22 @@
        #size-cells = <1>;
        model = "ibm,ebony";
        compatible = "ibm,ebony";
-       dcr-parent = <&/cpus/PowerPC,440GP@0>;
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               ethernet1 = &EMAC1;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
 
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
 
-               PowerPC,440GP@0 {
+               cpu@0 {
                        device_type = "cpu";
+                       model = "PowerPC,440GP";
                        reg = <0>;
                        clock-frequency = <0>; // Filled in by zImage
                        timebase-frequency = <0>; // Filled in by zImage
@@ -150,9 +158,10 @@
                                        };
                                };
 
-                               ds1743@1,0 {
+                               nvram@1,0 {
                                        /* NVRAM & RTC */
-                                       compatible = "ds1743";
+                                       compatible = "ds1743-nvram";
+                                       #bytes = <2000>;
                                        reg = <1 0 2000>;
                                };
 
@@ -284,12 +293,43 @@
 
                };
 
-               PCIX0: pci@1234 {
+               PCIX0: pci@20ec00000 {
                        device_type = "pci";
-                       /* FIXME */
-                       reg = <2 0ec00000 8
-                              2 0ec80000 f0
-                              2 0ec80100 fc>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+                       primary;
+                       reg = <2 0ec00000 8     /* Config space access */
+                              0 0 0            /* no IACK cycles */
+                              2 0ed00000 4     /* Special cycles */
+                              2 0ec80000 f0    /* Internal registers */
+                              2 0ec80100 fc>;  /* Internal messaging registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 00000003 80000000 0 80000000
+                                 01000000 0 00000000 00000002 08000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* Ebony has all 4 IRQ pins tied together per slot */
+                       interrupt-map-mask = <f800 0 0 0>;
+                       interrupt-map = <
+                               /* IDSEL 1 */
+                               0800 0 0 0 &UIC0 17 8
+
+                               /* IDSEL 2 */
+                               1000 0 0 0 &UIC0 18 8
+
+                               /* IDSEL 3 */
+                               1800 0 0 0 &UIC0 19 8
+
+                               /* IDSEL 4 */
+                               2000 0 0 0 &UIC0 1a 8
+                       >;
                };
        };
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/ep405.dts powerpc.git/arch/powerpc/boot/dts/ep405.dts
--- linux-2.6.24/arch/powerpc/boot/dts/ep405.dts        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/ep405.dts 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,228 @@
+/*
+ * Device Tree Source for EP405
+ *
+ * Copyright 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       model = "ep405";
+       compatible = "ep405";
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       model = "PowerPC,405GP";
+                       reg = <0>;
+                       clock-frequency = <bebc200>; /* Filled in by zImage */
+                       timebase-frequency = <0>; /* Filled in by zImage */
+                       i-cache-line-size = <20>;
+                       d-cache-line-size = <20>;
+                       i-cache-size = <4000>;
+                       d-cache-size = <4000>;
+                       dcr-controller;
+                       dcr-access-method = "native";
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0>; /* Filled in by zImage */
+       };
+
+       UIC0: interrupt-controller {
+               compatible = "ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0c0 9>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+       plb {
+               compatible = "ibm,plb3";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <0>; /* Filled in by zImage */
+
+               SDRAM0: memory-controller {
+                       compatible = "ibm,sdram-405gp";
+                       dcr-reg = <010 2>;
+               };
+
+               MAL: mcmal {
+                       compatible = "ibm,mcmal-405gp", "ibm,mcmal";
+                       dcr-reg = <180 62>;
+                       num-tx-chans = <1>;
+                       num-rx-chans = <1>;
+                       interrupt-parent = <&UIC0>;
+                       interrupts = <
+                               b 4 /* TXEOB */
+                               c 4 /* RXEOB */
+                               a 4 /* SERR */
+                               d 4 /* TXDE */
+                               e 4 /* RXDE */>;
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-405gp", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <ef600000 ef600000 a00000>;
+                       dcr-reg = <0a0 5>;
+                       clock-frequency = <0>; /* Filled in by zImage */
+
+                       UART0: serial@ef600300 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600300 8>;
+                               virtual-reg = <ef600300>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               current-speed = <2580>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0 4>;
+                       };
+
+                       UART1: serial@ef600400 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600400 8>;
+                               virtual-reg = <ef600400>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               current-speed = <2580>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1 4>;
+                       };
+
+                       IIC: i2c@ef600500 {
+                               compatible = "ibm,iic-405gp", "ibm,iic";
+                               reg = <ef600500 11>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <2 4>;
+                       };
+
+                       GPIO: gpio@ef600700 {
+                               compatible = "ibm,gpio-405gp";
+                               reg = <ef600700 20>;
+                       };
+
+                       EMAC: ethernet@ef600800 {
+                               linux,network-index = <0>;
+                               device_type = "network";
+                               compatible = "ibm,emac-405gp", "ibm,emac";
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <
+                                       f 4 /* Ethernet */
+                                       9 4 /* Ethernet Wake Up */>;
+                               local-mac-address = [000000000000]; /* Filled in by zImage */
+                               reg = <ef600800 70>;
+                               mal-device = <&MAL>;
+                               mal-tx-channel = <0>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rmii";
+                               phy-map = <00000000>;
+                       };
+
+               };
+
+               EBC0: ebc {
+                       compatible = "ibm,ebc-405gp", "ibm,ebc";
+                       dcr-reg = <012 2>;
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+
+
+                       /* The ranges property is supplied by the bootwrapper
+                        * and is based on the firmware's configuration of the
+                        * EBC bridge
+                        */
+                       clock-frequency = <0>; /* Filled in by zImage */
+
+                       /* NVRAM and RTC */
+                       nvrtc@4,200000 {
+                               compatible = "ds1742";
+                               reg = <4 200000 0>; /* size fixed up by zImage */
+                       };
+
+                       /* "BCSR" CPLD contains a PCI irq controller */
+                       bcsr@4,0 {
+                               compatible = "ep405-bcsr";
+                               reg = <4 0 10>;
+                               interrupt-controller;
+                               /* Routing table */
+                               irq-routing = [ 00      /* SYSERR */
+                                               01      /* STTM */
+                                               01      /* RTC */
+                                               01      /* FENET */
+                                               02      /* NB PCIIRQ mux ? */
+                                               03      /* SB Winbond 8259 ? */
+                                               04      /* Serial Ring */
+                                               05      /* USB (ep405pc) */
+                                               06      /* XIRQ 0 */
+                                               06      /* XIRQ 1 */
+                                               06      /* XIRQ 2 */
+                                               06      /* XIRQ 3 */
+                                               06      /* XIRQ 4 */
+                                               06      /* XIRQ 5 */
+                                               06      /* XIRQ 6 */
+                                               07];    /* Reserved */
+                       };
+               };
+
+               PCI0: pci@ec000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
+                       primary;
+                       reg = <eec00000 8       /* Config space access */
+                              eed80000 4       /* IACK */
+                              eed80000 4       /* Special cycle */
+                              ef480000 40>;    /* Internal registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed. Chip supports a second
+                        * IO range but we don't use it for now
+                        */
+                       ranges = <02000000 0 80000000 80000000 0 20000000
+                                 01000000 0 00000000 e8000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* That's all I know about IRQs on that thing ... */
+                       interrupt-map-mask = <f800 0 0 0>;
+                       interrupt-map = <
+                               /* USB */
+                               7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+                       >;
+               };
+       };
+
+       chosen {
+               linux,stdout-path = "/plb/opb/serial@ef600300";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/ep8248e.dts powerpc.git/arch/powerpc/boot/dts/ep8248e.dts
--- linux-2.6.24/arch/powerpc/boot/dts/ep8248e.dts      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/ep8248e.dts       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,207 @@
+/*
+ * Device Tree for the Embedded Planet EP8248E board running PlanetCore.
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+       model = "EP8248E";
+       compatible = "fsl,ep8248e";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               planetcore-SMC1 = &smc1;
+               planetcore-SCC1 = &scc1;
+               ethernet0 = &eth0;
+               ethernet1 = &eth1;
+               serial0 = &smc1;
+               serial1 = &scc1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,8248@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <32>;
+                       i-cache-line-size = <32>;
+                       d-cache-size = <16384>;
+                       i-cache-size = <16384>;
+                       timebase-frequency = <0>;
+                       clock-frequency = <0>;
+               };
+       };
+
+       localbus@f0010100 {
+               compatible = "fsl,mpc8248-localbus",
+                            "fsl,pq2-localbus",
+                            "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               reg = <0xf0010100 0x40>;
+
+               ranges = <0 0 0xfc000000 0x04000000
+                         1 0 0xfa000000 0x00008000>;
+
+               flash@0,3800000 {
+                       compatible = "cfi-flash";
+                       reg = <0 0x3800000 0x800000>;
+                       bank-width = <4>;
+                       device-width = <2>;
+               };
+
+               bcsr@1,0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       reg = <1 0 0x10>;
+                       compatible = "fsl,ep8248e-bcsr";
+                       ranges;
+
+                       mdio {
+                               device_type = "mdio";
+                               compatible = "fsl,ep8248e-mdio-bitbang";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <1 8 1>;
+
+                               PHY0: ethernet-phy@0 {
+                                       interrupt-parent = <&PIC>;
+                                       reg = <0>;
+                                       device_type = "ethernet-phy";
+                               };
+
+                               PHY1: ethernet-phy@1 {
+                                       interrupt-parent = <&PIC>;
+                                       reg = <1>;
+                                       device_type = "ethernet-phy";
+                               };
+                       };
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0>;
+       };
+
+       soc@f0000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
+               ranges = <0x00000000 0xf0000000 0x00053000>;
+
+               // Temporary until code stops depending on it.
+               device_type = "soc";
+
+               // Temporary -- will go away once kernel uses ranges for get_immrbase().
+               reg = <0xf0000000 0x00053000>;
+
+               cpm@119c0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       #interrupt-cells = <2>;
+                       compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
+                                    "simple-bus";
+                       reg = <0x119c0 0x30>;
+                       ranges;
+
+                       muram {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0 0x10000>;
+
+                               data@0 {
+                                       compatible = "fsl,cpm-muram-data";
+                                       reg = <0 0x1100 0x1140
+                                              0xec0 0x9800 0x800>;
+                               };
+                       };
+
+                       brg@119f0 {
+                               compatible = "fsl,mpc8248-brg",
+                                            "fsl,cpm2-brg",
+                                            "fsl,cpm-brg";
+                               reg = <0x119f0 0x10 0x115f0 0x10>;
+                       };
+
+                       /* Monitor port/SMC1 */
+                       smc1: serial@11a80 {
+                               device_type = "serial";
+                               compatible = "fsl,mpc8248-smc-uart",
+                                            "fsl,cpm2-smc-uart";
+                               reg = <0x11a80 0x20 0x1100 0x40>;
+                               interrupts = <4 8>;
+                               interrupt-parent = <&PIC>;
+                               fsl,cpm-brg = <7>;
+                               fsl,cpm-command = <0x1d000000>;
+                               linux,planetcore-label = "SMC1";
+                       };
+
+                       /* "Serial" port/SCC1 */
+                       scc1: serial@11a00 {
+                               device_type = "serial";
+                               compatible = "fsl,mpc8248-scc-uart",
+                                            "fsl,cpm2-scc-uart";
+                               reg = <0x11a00 0x20 0x8000 0x100>;
+                               interrupts = <40 8>;
+                               interrupt-parent = <&PIC>;
+                               fsl,cpm-brg = <1>;
+                               fsl,cpm-command = <0x00800000>;
+                               linux,planetcore-label = "SCC1";
+                       };
+
+                       eth0: ethernet@11300 {
+                               device_type = "network";
+                               compatible = "fsl,mpc8248-fcc-enet",
+                                            "fsl,cpm2-fcc-enet";
+                               reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
+                               local-mac-address = [ 00 00 00 00 00 00 ];
+                               interrupts = <32 8>;
+                               interrupt-parent = <&PIC>;
+                               phy-handle = <&PHY0>;
+                               linux,network-index = <0>;
+                               fsl,cpm-command = <0x12000300>;
+                       };
+
+                       eth1: ethernet@11320 {
+                               device_type = "network";
+                               compatible = "fsl,mpc8248-fcc-enet",
+                                            "fsl,cpm2-fcc-enet";
+                               reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
+                               local-mac-address = [ 00 00 00 00 00 00 ];
+                               interrupts = <33 8>;
+                               interrupt-parent = <&PIC>;
+                               phy-handle = <&PHY1>;
+                               linux,network-index = <1>;
+                               fsl,cpm-command = <0x16200300>;
+                       };
+
+                       usb@11b60 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,mpc8248-usb",
+                                            "fsl,cpm2-usb";
+                               reg = <0x11b60 0x18 0x8b00 0x100>;
+                               interrupt-parent = <&PIC>;
+                               interrupts = <11 8>;
+                               fsl,cpm-command = <0x2e600000>;
+                       };
+               };
+
+               PIC: interrupt-controller@10c00 {
+                       #interrupt-cells = <2>;
+                       interrupt-controller;
+                       reg = <0x10c00 0x80>;
+                       compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
+               };
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/haleakala.dts powerpc.git/arch/powerpc/boot/dts/haleakala.dts
--- linux-2.6.24/arch/powerpc/boot/dts/haleakala.dts    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/haleakala.dts     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,274 @@
+/*
+ * Device Tree Source for AMCC Haleakala (405EXr)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       model = "amcc,haleakala";
+       compatible = "amcc,kilauea";
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       model = "PowerPC,405EXr";
+                       reg = <0>;
+                       clock-frequency = <0>; /* Filled in by U-Boot */
+                       timebase-frequency = <0>; /* Filled in by U-Boot */
+                       i-cache-line-size = <20>;
+                       d-cache-line-size = <20>;
+                       i-cache-size = <4000>; /* 16 kB */
+                       d-cache-size = <4000>; /* 16 kB */
+                       dcr-controller;
+                       dcr-access-method = "native";
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0>; /* Filled in by U-Boot */
+       };
+
+       UIC0: interrupt-controller {
+               compatible = "ibm,uic-405exr", "ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0c0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+       UIC1: interrupt-controller1 {
+               compatible = "ibm,uic-405exr","ibm,uic";
+               interrupt-controller;
+               cell-index = <1>;
+               dcr-reg = <0d0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1e 4 1f 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       UIC2: interrupt-controller2 {
+               compatible = "ibm,uic-405exr","ibm,uic";
+               interrupt-controller;
+               cell-index = <2>;
+               dcr-reg = <0e0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1c 4 1d 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       plb {
+               compatible = "ibm,plb-405exr", "ibm,plb4";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <0>; /* Filled in by U-Boot */
+
+               SDRAM0: memory-controller {
+                       compatible = "ibm,sdram-405exr";
+                       dcr-reg = <010 2>;
+               };
+
+               MAL0: mcmal {
+                       compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
+                       dcr-reg = <180 62>;
+                       num-tx-chans = <2>;
+                       num-rx-chans = <2>;
+                       interrupt-parent = <&MAL0>;
+                       interrupts = <0 1 2 3 4>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+                                       /*RXEOB*/ 1 &UIC0 b 4
+                                       /*SERR*/  2 &UIC1 0 4
+                                       /*TXDE*/  3 &UIC1 1 4
+                                       /*RXDE*/  4 &UIC1 2 4>;
+                       interrupt-map-mask = <ffffffff>;
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-405exr", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <80000000 80000000 10000000
+                                 ef600000 ef600000 a00000
+                                 f0000000 f0000000 10000000>;
+                       dcr-reg = <0a0 5>;
+                       clock-frequency = <0>; /* Filled in by U-Boot */
+
+                       EBC0: ebc {
+                               compatible = "ibm,ebc-405exr", "ibm,ebc";
+                               dcr-reg = <012 2>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               /* ranges property is supplied by U-Boot */
+                               interrupts = <5 1>;
+                               interrupt-parent = <&UIC1>;
+
+                               nor_flash@0,0 {
+                                       compatible = "amd,s29gl512n", "cfi-flash";
+                                       bank-width = <2>;
+                                       reg = <0 000000 4000000>;
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       partition@0 {
+                                               label = "kernel";
+                                               reg = <0 200000>;
+                                       };
+                                       partition@200000 {
+                                               label = "root";
+                                               reg = <200000 200000>;
+                                       };
+                                       partition@400000 {
+                                               label = "user";
+                                               reg = <400000 3b60000>;
+                                       };
+                                       partition@3f60000 {
+                                               label = "env";
+                                               reg = <3f60000 40000>;
+                                       };
+                                       partition@3fa0000 {
+                                               label = "u-boot";
+                                               reg = <3fa0000 60000>;
+                                       };
+                               };
+                       };
+
+                       UART0: serial@ef600200 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600200 8>;
+                               virtual-reg = <ef600200>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1a 4>;
+                       };
+
+                       UART1: serial@ef600300 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600300 8>;
+                               virtual-reg = <ef600300>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1 4>;
+                       };
+
+                       IIC0: i2c@ef600400 {
+                               compatible = "ibm,iic-405exr", "ibm,iic";
+                               reg = <ef600400 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <2 4>;
+                       };
+
+                       IIC1: i2c@ef600500 {
+                               compatible = "ibm,iic-405exr", "ibm,iic";
+                               reg = <ef600500 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <7 4>;
+                       };
+
+
+                       RGMII0: emac-rgmii@ef600b00 {
+                               compatible = "ibm,rgmii-405exr", "ibm,rgmii";
+                               reg = <ef600b00 104>;
+                               has-mdio;
+                       };
+
+                       EMAC0: ethernet@ef600900 {
+                               linux,network-index = <0>;
+                               device_type = "network";
+                               compatible = "ibm,emac-405exr", "ibm,emac4";
+                               interrupt-parent = <&EMAC0>;
+                               interrupts = <0 1>;
+                               #interrupt-cells = <1>;
+                               #address-cells = <0>;
+                               #size-cells = <0>;
+                               interrupt-map = </*Status*/ 0 &UIC0 18 4
+                                               /*Wake*/  1 &UIC1 1d 4>;
+                               reg = <ef600900 70>;
+                               local-mac-address = [000000000000]; /* Filled in by U-Boot */
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <0>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rgmii";
+                               phy-map = <00000000>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <0>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                       };
+               };
+
+               PCIE0: pciex@0a0000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex";
+                       primary;
+                       port = <0>; /* port number */
+                       reg = <a0000000 20000000        /* Config space access */
+                              ef000000 00001000>;      /* Registers */
+                       dcr-reg = <040 020>;
+                       sdr-base = <400>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 90000000 0 08000000
+                                 01000000 0 00000000 e0000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* This drives busses 0x00 to 0x3f */
+                       bus-range = <00 3f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC2 0 4 /* swizzled int A */
+                               0000 0 0 2 &UIC2 1 4 /* swizzled int B */
+                               0000 0 0 3 &UIC2 2 4 /* swizzled int C */
+                               0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+               };
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/katmai.dts powerpc.git/arch/powerpc/boot/dts/katmai.dts
--- linux-2.6.24/arch/powerpc/boot/dts/katmai.dts       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/katmai.dts        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,400 @@
+/*
+ * Device Tree Source for AMCC Katmai eval board
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       model = "amcc,katmai";
+       compatible = "amcc,katmai";
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               serial0 = &UART0;
+               serial1 = &UART1;
+               serial2 = &UART2;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       model = "PowerPC,440SPe";
+                       reg = <0>;
+                       clock-frequency = <0>; /* Filled in by zImage */
+                       timebase-frequency = <0>; /* Filled in by zImage */
+                       i-cache-line-size = <20>;
+                       d-cache-line-size = <20>;
+                       i-cache-size = <20000>;
+                       d-cache-size = <20000>;
+                       dcr-controller;
+                       dcr-access-method = "native";
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0 0>; /* Filled in by zImage */
+       };
+
+       UIC0: interrupt-controller0 {
+               compatible = "ibm,uic-440spe","ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0c0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+       UIC1: interrupt-controller1 {
+               compatible = "ibm,uic-440spe","ibm,uic";
+               interrupt-controller;
+               cell-index = <1>;
+               dcr-reg = <0d0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1e 4 1f 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       UIC2: interrupt-controller2 {
+               compatible = "ibm,uic-440spe","ibm,uic";
+               interrupt-controller;
+               cell-index = <2>;
+               dcr-reg = <0e0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <a 4 b 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       UIC3: interrupt-controller3 {
+               compatible = "ibm,uic-440spe","ibm,uic";
+               interrupt-controller;
+               cell-index = <3>;
+               dcr-reg = <0f0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <10 4 11 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       SDR0: sdr {
+               compatible = "ibm,sdr-440spe";
+               dcr-reg = <00e 002>;
+       };
+
+       CPR0: cpr {
+               compatible = "ibm,cpr-440spe";
+               dcr-reg = <00c 002>;
+       };
+
+       plb {
+               compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <0>; /* Filled in by zImage */
+
+               SDRAM0: sdram {
+                       compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+                       dcr-reg = <010 2>;
+               };
+
+               MAL0: mcmal {
+                       compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+                       dcr-reg = <180 62>;
+                       num-tx-chans = <2>;
+                       num-rx-chans = <1>;
+                       interrupt-parent = <&MAL0>;
+                       interrupts = <0 1 2 3 4>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
+                                        /*RXEOB*/ 1 &UIC1 7 4
+                                        /*SERR*/  2 &UIC1 1 4
+                                        /*TXDE*/  3 &UIC1 2 4
+                                        /*RXDE*/  4 &UIC1 3 4>;
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <00000000 4 e0000000 20000000>;
+                       clock-frequency = <0>; /* Filled in by zImage */
+
+                       EBC0: ebc {
+                               compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+                               dcr-reg = <012 2>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               interrupts = <5 1>;
+                               interrupt-parent = <&UIC1>;
+                       };
+
+                       UART0: serial@10000200 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <10000200 8>;
+                               virtual-reg = <a0000200>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               current-speed = <1c200>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0 4>;
+                       };
+
+                       UART1: serial@10000300 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <10000300 8>;
+                               virtual-reg = <a0000300>;
+                               clock-frequency = <0>;
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1 4>;
+                       };
+
+
+                       UART2: serial@10000600 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <10000600 8>;
+                               virtual-reg = <a0000600>;
+                               clock-frequency = <0>;
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <5 4>;
+                       };
+
+                       IIC0: i2c@10000400 {
+                               device_type = "i2c";
+                               compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+                               reg = <10000400 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <2 4>;
+                       };
+
+                       IIC1: i2c@10000500 {
+                               device_type = "i2c";
+                               compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+                               reg = <10000500 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <3 4>;
+                       };
+
+                       EMAC0: ethernet@10000800 {
+                               linux,network-index = <0>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440spe", "ibm,emac4";
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <1c 4 1d 4>;
+                               reg = <10000800 70>;
+                               local-mac-address = [000000000000];
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <0>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "gmii";
+                               phy-map = <00000000>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                       };
+               };
+
+               PCIX0: pci@c0ec00000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+                       primary;
+                       large-inbound-windows;
+                       enable-msi-hole;
+                       reg = <c 0ec00000   8   /* Config space access */
+                              0 0 0            /* no IACK cycles */
+                              c 0ed00000   4   /* Special cycles */
+                              c 0ec80000 100   /* Internal registers */
+                              c 0ec80100  fc>; /* Internal messaging registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+                                 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* This drives busses 0 to 0xf */
+                       bus-range = <0 f>;
+
+                       /*
+                        * On Katmai, the following PCI-X interrupts signals
+                        * have to be enabled via jumpers (only INTA is
+                        * enabled per default):
+                        *
+                        * INTB: J3: 1-2
+                        * INTC: J2: 1-2
+                        * INTD: J1: 1-2
+                        */
+                       interrupt-map-mask = <f800 0 0 7>;
+                       interrupt-map = <
+                               /* IDSEL 1 */
+                               0800 0 0 1 &UIC1 14 8
+                               0800 0 0 2 &UIC1 13 8
+                               0800 0 0 3 &UIC1 12 8
+                               0800 0 0 4 &UIC1 11 8
+                       >;
+               };
+
+               PCIE0: pciex@d00000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+                       primary;
+                       port = <0>; /* port number */
+                       reg = <d 00000000 20000000      /* Config space access */
+                              c 10000000 00001000>;    /* Registers */
+                       dcr-reg = <100 020>;
+                       sdr-base = <300>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+                                 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* This drives busses 10 to 0x1f */
+                       bus-range = <10 1f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC3 0 4 /* swizzled int A */
+                               0000 0 0 2 &UIC3 1 4 /* swizzled int B */
+                               0000 0 0 3 &UIC3 2 4 /* swizzled int C */
+                               0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+               };
+
+               PCIE1: pciex@d20000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+                       primary;
+                       port = <1>; /* port number */
+                       reg = <d 20000000 20000000      /* Config space access */
+                              c 10001000 00001000>;    /* Registers */
+                       dcr-reg = <120 020>;
+                       sdr-base = <340>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+                                 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* This drives busses 10 to 0x1f */
+                       bus-range = <20 2f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC3 4 4 /* swizzled int A */
+                               0000 0 0 2 &UIC3 5 4 /* swizzled int B */
+                               0000 0 0 3 &UIC3 6 4 /* swizzled int C */
+                               0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+               };
+
+               PCIE2: pciex@d40000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+                       primary;
+                       port = <2>; /* port number */
+                       reg = <d 40000000 20000000      /* Config space access */
+                              c 10002000 00001000>;    /* Registers */
+                       dcr-reg = <140 020>;
+                       sdr-base = <370>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
+                                 01000000 0 00000000 0000000f 80020000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* This drives busses 10 to 0x1f */
+                       bus-range = <30 3f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC3 8 4 /* swizzled int A */
+                               0000 0 0 2 &UIC3 9 4 /* swizzled int B */
+                               0000 0 0 3 &UIC3 a 4 /* swizzled int C */
+                               0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+               };
+       };
+
+       chosen {
+               linux,stdout-path = "/plb/opb/serial@10000200";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/kilauea.dts powerpc.git/arch/powerpc/boot/dts/kilauea.dts
--- linux-2.6.24/arch/powerpc/boot/dts/kilauea.dts      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/kilauea.dts       2008-01-28 20:25:49.000000000 +0100
@@ -13,14 +13,22 @@
        #size-cells = <1>;
        model = "amcc,kilauea";
        compatible = "amcc,kilauea";
-       dcr-parent = <&/cpus/PowerPC,405EX@0>;
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               ethernet1 = &EMAC1;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
 
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
 
-               PowerPC,405EX@0 {
+               cpu@0 {
                        device_type = "cpu";
+                       model = "PowerPC,405EX";
                        reg = <0>;
                        clock-frequency = <0>; /* Filled in by U-Boot */
                        timebase-frequency = <0>; /* Filled in by U-Boot */
@@ -194,6 +202,7 @@
                                device_type = "rgmii-interface";
                                compatible = "ibm,rgmii-405ex", "ibm,rgmii";
                                reg = <ef600b00 104>;
+                               has-mdio;
                        };
 
                        EMAC0: ethernet@ef600900 {
@@ -220,6 +229,8 @@
                                phy-map = <00000000>;
                                rgmii-device = <&RGMII0>;
                                rgmii-channel = <0>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
                        };
 
                        EMAC1: ethernet@ef600a00 {
@@ -246,7 +257,91 @@
                                phy-map = <00000000>;
                                rgmii-device = <&RGMII0>;
                                rgmii-channel = <1>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
                        };
                };
+
+               PCIE0: pciex@0a0000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+                       primary;
+                       port = <0>; /* port number */
+                       reg = <a0000000 20000000        /* Config space access */
+                              ef000000 00001000>;      /* Registers */
+                       dcr-reg = <040 020>;
+                       sdr-base = <400>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 90000000 0 08000000
+                                 01000000 0 00000000 e0000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* This drives busses 0x00 to 0x3f */
+                       bus-range = <00 3f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC2 0 4 /* swizzled int A */
+                               0000 0 0 2 &UIC2 1 4 /* swizzled int B */
+                               0000 0 0 3 &UIC2 2 4 /* swizzled int C */
+                               0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+               };
+
+               PCIE1: pciex@0c0000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+                       primary;
+                       port = <1>; /* port number */
+                       reg = <c0000000 20000000        /* Config space access */
+                              ef001000 00001000>;      /* Registers */
+                       dcr-reg = <060 020>;
+                       sdr-base = <440>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 98000000 0 08000000
+                                 01000000 0 00000000 e0010000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* This drives busses 0x40 to 0x7f */
+                       bus-range = <40 7f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC2 b 4 /* swizzled int A */
+                               0000 0 0 2 &UIC2 c 4 /* swizzled int B */
+                               0000 0 0 3 &UIC2 d 4 /* swizzled int C */
+                               0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+               };
        };
 };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/kuroboxHD.dts powerpc.git/arch/powerpc/boot/dts/kuroboxHD.dts
--- linux-2.6.24/arch/powerpc/boot/dts/kuroboxHD.dts    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/kuroboxHD.dts     2008-01-28 20:25:49.000000000 +0100
@@ -23,6 +23,12 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -60,7 +66,7 @@
                i2c@80003000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <80003000 1000>;
                        interrupts = <5 2>;
@@ -73,7 +79,8 @@
                        };
                };
 
-               serial@80004500 {
+               serial0: serial@80004500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004500 8>;
@@ -83,7 +90,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@80004600 {
+               serial1: serial@80004600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004600 8>;
@@ -102,7 +110,7 @@
                        reg = <80040000 40000>;
                };
 
-               pci@fec00000 {
+               pci0: pci@fec00000 {
                        #address-cells = <3>;
                        #size-cells = <2>;
                        #interrupt-cells = <1>;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/kuroboxHG.dts powerpc.git/arch/powerpc/boot/dts/kuroboxHG.dts
--- linux-2.6.24/arch/powerpc/boot/dts/kuroboxHG.dts    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/kuroboxHG.dts     2008-01-28 20:25:49.000000000 +0100
@@ -23,6 +23,12 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -60,7 +66,7 @@
                i2c@80003000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <80003000 1000>;
                        interrupts = <5 2>;
@@ -73,7 +79,8 @@
                        };
                };
 
-               serial@80004500 {
+               serial0: serial@80004500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004500 8>;
@@ -83,7 +90,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@80004600 {
+               serial1: serial@80004600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004600 8>;
@@ -102,7 +110,7 @@
                        reg = <80040000 40000>;
                };
 
-               pci@fec00000 {
+               pci0: pci@fec00000 {
                        #address-cells = <3>;
                        #size-cells = <2>;
                        #interrupt-cells = <1>;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/lite5200.dts powerpc.git/arch/powerpc/boot/dts/lite5200.dts
--- linux-2.6.24/arch/powerpc/boot/dts/lite5200.dts     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/lite5200.dts      2008-01-28 20:25:49.000000000 +0100
@@ -19,7 +19,7 @@
 / {
        model = "fsl,lite5200";
        // revision = "1.0";
-       compatible = "fsl,lite5200","generic-mpc5200";
+       compatible = "fsl,lite5200";
        #address-cells = <1>;
        #size-cells = <1>;
 
@@ -284,7 +284,8 @@
                };
 
                i2c@3d00 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
                        compatible = "mpc5200-i2c","fsl-i2c";
                        cell-index = <0>;
                        reg = <3d00 40>;
@@ -294,7 +295,8 @@
                };
 
                i2c@3d40 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
                        compatible = "mpc5200-i2c","fsl-i2c";
                        cell-index = <1>;
                        reg = <3d40 40>;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/lite5200b.dts powerpc.git/arch/powerpc/boot/dts/lite5200b.dts
--- linux-2.6.24/arch/powerpc/boot/dts/lite5200b.dts    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/lite5200b.dts     2008-01-28 20:25:49.000000000 +0100
@@ -19,7 +19,7 @@
 / {
        model = "fsl,lite5200b";
        // revision = "1.0";
-       compatible = "fsl,lite5200b","generic-mpc5200";
+       compatible = "fsl,lite5200b";
        #address-cells = <1>;
        #size-cells = <1>;
 
@@ -300,7 +300,8 @@
                };
 
                i2c@3d00 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
                        compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
                        cell-index = <0>;
                        reg = <3d00 40>;
@@ -310,7 +311,8 @@
                };
 
                i2c@3d40 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
                        compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
                        cell-index = <1>;
                        reg = <3d40 40>;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/makalu.dts powerpc.git/arch/powerpc/boot/dts/makalu.dts
--- linux-2.6.24/arch/powerpc/boot/dts/makalu.dts       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/makalu.dts        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,347 @@
+/*
+ * Device Tree Source for AMCC Makalu (405EX)
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       model = "amcc,makalu";
+       compatible = "amcc,makalu";
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               ethernet1 = &EMAC1;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       model = "PowerPC,405EX";
+                       reg = <0>;
+                       clock-frequency = <0>; /* Filled in by U-Boot */
+                       timebase-frequency = <0>; /* Filled in by U-Boot */
+                       i-cache-line-size = <20>;
+                       d-cache-line-size = <20>;
+                       i-cache-size = <4000>; /* 16 kB */
+                       d-cache-size = <4000>; /* 16 kB */
+                       dcr-controller;
+                       dcr-access-method = "native";
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0>; /* Filled in by U-Boot */
+       };
+
+       UIC0: interrupt-controller {
+               compatible = "ibm,uic-405ex", "ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0c0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+       UIC1: interrupt-controller1 {
+               compatible = "ibm,uic-405ex","ibm,uic";
+               interrupt-controller;
+               cell-index = <1>;
+               dcr-reg = <0d0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1e 4 1f 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       UIC2: interrupt-controller2 {
+               compatible = "ibm,uic-405ex","ibm,uic";
+               interrupt-controller;
+               cell-index = <2>;
+               dcr-reg = <0e0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1c 4 1d 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       plb {
+               compatible = "ibm,plb-405ex", "ibm,plb4";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <0>; /* Filled in by U-Boot */
+
+               SDRAM0: memory-controller {
+                       compatible = "ibm,sdram-405ex";
+                       dcr-reg = <010 2>;
+               };
+
+               MAL0: mcmal {
+                       compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+                       dcr-reg = <180 62>;
+                       num-tx-chans = <2>;
+                       num-rx-chans = <2>;
+                       interrupt-parent = <&MAL0>;
+                       interrupts = <0 1 2 3 4>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+                                       /*RXEOB*/ 1 &UIC0 b 4
+                                       /*SERR*/  2 &UIC1 0 4
+                                       /*TXDE*/  3 &UIC1 1 4
+                                       /*RXDE*/  4 &UIC1 2 4>;
+                       interrupt-map-mask = <ffffffff>;
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-405ex", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <80000000 80000000 10000000
+                                 ef600000 ef600000 a00000
+                                 f0000000 f0000000 10000000>;
+                       dcr-reg = <0a0 5>;
+                       clock-frequency = <0>; /* Filled in by U-Boot */
+
+                       EBC0: ebc {
+                               compatible = "ibm,ebc-405ex", "ibm,ebc";
+                               dcr-reg = <012 2>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               /* ranges property is supplied by U-Boot */
+                               interrupts = <5 1>;
+                               interrupt-parent = <&UIC1>;
+
+                               nor_flash@0,0 {
+                                       compatible = "amd,s29gl512n", "cfi-flash";
+                                       bank-width = <2>;
+                                       reg = <0 000000 4000000>;
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       partition@0 {
+                                               label = "kernel";
+                                               reg = <0 200000>;
+                                       };
+                                       partition@200000 {
+                                               label = "root";
+                                               reg = <200000 200000>;
+                                       };
+                                       partition@400000 {
+                                               label = "user";
+                                               reg = <400000 3b60000>;
+                                       };
+                                       partition@3f60000 {
+                                               label = "env";
+                                               reg = <3f60000 40000>;
+                                       };
+                                       partition@3fa0000 {
+                                               label = "u-boot";
+                                               reg = <3fa0000 60000>;
+                                       };
+                               };
+                       };
+
+                       UART0: serial@ef600200 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600200 8>;
+                               virtual-reg = <ef600200>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1a 4>;
+                       };
+
+                       UART1: serial@ef600300 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600300 8>;
+                               virtual-reg = <ef600300>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1 4>;
+                       };
+
+                       IIC0: i2c@ef600400 {
+                               device_type = "i2c";
+                               compatible = "ibm,iic-405ex", "ibm,iic";
+                               reg = <ef600400 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <2 4>;
+                       };
+
+                       IIC1: i2c@ef600500 {
+                               device_type = "i2c";
+                               compatible = "ibm,iic-405ex", "ibm,iic";
+                               reg = <ef600500 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <7 4>;
+                       };
+
+
+                       RGMII0: emac-rgmii@ef600b00 {
+                               device_type = "rgmii-interface";
+                               compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+                               reg = <ef600b00 104>;
+                               has-mdio;
+                       };
+
+                       EMAC0: ethernet@ef600900 {
+                               linux,network-index = <0>;
+                               device_type = "network";
+                               compatible = "ibm,emac-405ex", "ibm,emac4";
+                               interrupt-parent = <&EMAC0>;
+                               interrupts = <0 1>;
+                               #interrupt-cells = <1>;
+                               #address-cells = <0>;
+                               #size-cells = <0>;
+                               interrupt-map = </*Status*/ 0 &UIC0 18 4
+                                               /*Wake*/  1 &UIC1 1d 4>;
+                               reg = <ef600900 70>;
+                               local-mac-address = [000000000000]; /* Filled in by U-Boot */
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <0>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rgmii";
+                               phy-map = <0000003f>;   /* Start at 6 */
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <0>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                       };
+
+                       EMAC1: ethernet@ef600a00 {
+                               linux,network-index = <1>;
+                               device_type = "network";
+                               compatible = "ibm,emac-405ex", "ibm,emac4";
+                               interrupt-parent = <&EMAC1>;
+                               interrupts = <0 1>;
+                               #interrupt-cells = <1>;
+                               #address-cells = <0>;
+                               #size-cells = <0>;
+                               interrupt-map = </*Status*/ 0 &UIC0 19 4
+                                               /*Wake*/  1 &UIC1 1f 4>;
+                               reg = <ef600a00 70>;
+                               local-mac-address = [000000000000]; /* Filled in by U-Boot */
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <1>;
+                               mal-rx-channel = <1>;
+                               cell-index = <1>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rgmii";
+                               phy-map = <00000000>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <1>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                       };
+               };
+
+               PCIE0: pciex@0a0000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+                       primary;
+                       port = <0>; /* port number */
+                       reg = <a0000000 20000000        /* Config space access */
+                              ef000000 00001000>;      /* Registers */
+                       dcr-reg = <040 020>;
+                       sdr-base = <400>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 90000000 0 08000000
+                                 01000000 0 00000000 e0000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* This drives busses 0x00 to 0x3f */
+                       bus-range = <00 3f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC2 0 4 /* swizzled int A */
+                               0000 0 0 2 &UIC2 1 4 /* swizzled int B */
+                               0000 0 0 3 &UIC2 2 4 /* swizzled int C */
+                               0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+               };
+
+               PCIE1: pciex@0c0000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+                       primary;
+                       port = <1>; /* port number */
+                       reg = <c0000000 20000000        /* Config space access */
+                              ef001000 00001000>;      /* Registers */
+                       dcr-reg = <060 020>;
+                       sdr-base = <440>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 98000000 0 08000000
+                                 01000000 0 00000000 e0010000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* This drives busses 0x40 to 0x7f */
+                       bus-range = <40 7f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC2 b 4 /* swizzled int A */
+                               0000 0 0 2 &UIC2 c 4 /* swizzled int B */
+                               0000 0 0 3 &UIC2 d 4 /* swizzled int C */
+                               0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+               };
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/motionpro.dts powerpc.git/arch/powerpc/boot/dts/motionpro.dts
--- linux-2.6.24/arch/powerpc/boot/dts/motionpro.dts    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/motionpro.dts     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,309 @@
+/*
+ * Motion-PRO board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+       model = "promess,motionpro";
+       compatible = "promess,motionpro";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,5200@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <20>;
+                       i-cache-line-size = <20>;
+                       d-cache-size = <4000>;          // L1, 16K
+                       i-cache-size = <4000>;          // L1, 16K
+                       timebase-frequency = <0>;       // from bootloader
+                       bus-frequency = <0>;            // from bootloader
+                       clock-frequency = <0>;          // from bootloader
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <00000000 04000000>;      // 64MB
+       };
+
+       soc5200@f0000000 {
+               model = "fsl,mpc5200b";
+               compatible = "fsl,mpc5200b";
+               revision = "";                  // from bootloader
+               device_type = "soc";
+               ranges = <0 f0000000 0000c000>;
+               reg = <f0000000 00000100>;
+               bus-frequency = <0>;            // from bootloader
+               system-frequency = <0>;         // from bootloader
+
+               cdm@200 {
+                       compatible = "mpc5200b-cdm","mpc5200-cdm";
+                       reg = <200 38>;
+               };
+
+               mpc5200_pic: pic@500 {
+                       // 5200 interrupts are encoded into two levels;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       compatible = "mpc5200b-pic","mpc5200-pic";
+                       reg = <500 80>;
+               };
+
+               gpt@600 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <600 10>;
+                       interrupts = <1 9 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl,has-wdt;
+               };
+
+               gpt@610 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <610 10>;
+                       interrupts = <1 a 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@620 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <620 10>;
+                       interrupts = <1 b 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@630 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <630 10>;
+                       interrupts = <1 c 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@640 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <640 10>;
+                       interrupts = <1 d 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@650 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <650 10>;
+                       interrupts = <1 e 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               motionpro-led@660 {     // Motion-PRO status LED
+                       compatible = "promess,motionpro-led";
+                       label = "motionpro-statusled";
+                       reg = <660 10>;
+                       interrupts = <1 f 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       blink-delay = <64>; // 100 msec
+               };
+
+               motionpro-led@670 {     // Motion-PRO ready LED
+                       compatible = "promess,motionpro-led";
+                       label = "motionpro-readyled";
+                       reg = <670 10>;
+                       interrupts = <1 10 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               rtc@800 {       // Real time clock
+                       compatible = "mpc5200b-rtc","mpc5200-rtc";
+                       reg = <800 100>;
+                       interrupts = <1 5 0 1 6 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               mscan@980 {
+                       compatible = "mpc5200b-mscan","mpc5200-mscan";
+                       interrupts = <2 12 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       reg = <980 80>;
+               };
+
+               gpio@b00 {
+                       compatible = "mpc5200b-gpio","mpc5200-gpio";
+                       reg = <b00 40>;
+                       interrupts = <1 7 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpio-wkup@c00 {
+                       compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+                       reg = <c00 40>;
+                       interrupts = <1 8 0 0 3 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+
+               spi@f00 {
+                       compatible = "mpc5200b-spi","mpc5200-spi";
+                       reg = <f00 20>;
+                       interrupts = <2 d 0 2 e 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               usb@1000 {
+                       compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+                       reg = <1000 ff>;
+                       interrupts = <2 6 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               dma-controller@1200 {
+                       compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+                       reg = <1200 80>;
+                       interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+                                     3 4 0  3 5 0  3 6 0  3 7 0
+                                     3 8 0  3 9 0  3 a 0  3 b 0
+                                     3 c 0  3 d 0  3 e 0  3 f 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               xlb@1f00 {
+                       compatible = "mpc5200b-xlb","mpc5200-xlb";
+                       reg = <1f00 100>;
+               };
+
+               serial@2000 {           // PSC1
+                       device_type = "serial";
+                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       port-number = <0>;  // Logical port assignment
+                       reg = <2000 100>;
+                       interrupts = <2 1 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               // PSC2 in spi master mode 
+               spi@2200 {              // PSC2
+                       compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
+                       cell-index = <1>;
+                       reg = <2200 100>;
+                       interrupts = <2 2 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               // PSC5 in uart mode
+               serial@2800 {           // PSC5
+                       device_type = "serial";
+                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       port-number = <4>;  // Logical port assignment
+                       reg = <2800 100>;
+                       interrupts = <2 c 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               ethernet@3000 {
+                       device_type = "network";
+                       compatible = "mpc5200b-fec","mpc5200-fec";
+                       reg = <3000 800>;
+                       local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+                       interrupts = <2 5 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               ata@3a00 {
+                       compatible = "mpc5200b-ata","mpc5200-ata";
+                       reg = <3a00 100>;
+                       interrupts = <2 7 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               i2c@3d40 {
+                       compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+                       reg = <3d40 40>;
+                       interrupts = <2 10 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl5200-clocking;
+               };
+
+               sram@8000 {
+                       compatible = "mpc5200b-sram","mpc5200-sram";
+                       reg = <8000 4000>;
+               };
+       };
+
+       lpb {
+               model = "fsl,lpb";
+               compatible = "fsl,lpb";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               ranges = <1 0 50000000 00010000
+                         2 0 50010000 00010000
+                         3 0 50020000 00010000>;
+
+               // 8-bit DualPort SRAM on LocalPlus Bus CS1
+               kollmorgen@1,0 {
+                       compatible = "promess,motionpro-kollmorgen";
+                       reg = <1 0 10000>;
+                       interrupts = <1 1 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               // 8-bit board CPLD on LocalPlus Bus CS2
+               cpld@2,0 {
+                       compatible = "promess,motionpro-cpld";
+                       reg = <2 0 10000>;
+               };
+
+               // 8-bit custom Anybus Module on LocalPlus Bus CS3
+               anybus@3,0 {
+                       compatible = "promess,motionpro-anybus";
+                       reg = <3 0 10000>;
+               };
+               pro_module_general@3,0 {
+                       compatible = "promess,pro_module_general";
+                       reg = <3 0 3>;
+               };
+               pro_module_dio@3,800 {
+                       compatible = "promess,pro_module_dio";
+                       reg = <3 800 2>;
+               };
+       };
+
+       pci@f0000d00 {
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               compatible = "mpc5200b-pci","mpc5200-pci";
+               reg = <f0000d00 100>;
+               interrupt-map-mask = <f800 0 0 7>;
+               interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+                                c000 0 0 2 &mpc5200_pic 1 1 3
+                                c000 0 0 3 &mpc5200_pic 1 2 3
+                                c000 0 0 4 &mpc5200_pic 1 3 3
+
+                                c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+                                c800 0 0 2 &mpc5200_pic 1 2 3
+                                c800 0 0 3 &mpc5200_pic 1 3 3
+                                c800 0 0 4 &mpc5200_pic 0 0 3>;
+               clock-frequency = <0>; // From boot loader
+               interrupts = <2 8 0 2 9 0 2 a 0>;
+               interrupt-parent = <&mpc5200_pic>;
+               bus-range = <0 0>;
+               ranges = <42000000 0 80000000 80000000 0 20000000
+                         02000000 0 a0000000 a0000000 0 10000000
+                         01000000 0 00000000 b0000000 0 01000000>;
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8313erdb.dts powerpc.git/arch/powerpc/boot/dts/mpc8313erdb.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8313erdb.dts  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8313erdb.dts   2008-01-28 20:25:49.000000000 +0100
@@ -15,6 +15,14 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -37,10 +45,58 @@
                reg = <00000000 08000000>;      // 128MB at 0
        };
 
+       localbus@e0005000 {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
+               reg = <e0005000 1000>;
+               interrupts = <d#77 8>;
+               interrupt-parent = <&ipic>;
+
+               // CS0 and CS1 are swapped when
+               // booting from nand, but the
+               // addresses are the same.
+               ranges = <0 0 fe000000 00800000
+                         1 0 e2800000 00008000
+                         2 0 f0000000 00020000
+                         3 0 fa000000 00008000>;
+
+               flash@0,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "cfi-flash";
+                       reg = <0 0 800000>;
+                       bank-width = <2>;
+                       device-width = <1>;
+               };
+
+               nand@1,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc8313-fcm-nand",
+                                    "fsl,elbc-fcm-nand";
+                       reg = <1 0 2000>;
+
+                       u-boot@0 {
+                               reg = <0 100000>;
+                               read-only;
+                       };
+
+                       kernel@100000 {
+                               reg = <100000 300000>;
+                       };
+
+                       fs@400000 {
+                               reg = <400000 1c00000>;
+                       };
+               };
+       };
+
        soc8313@e0000000 {
                #address-cells = <1>;
                #size-cells = <1>;
                device_type = "soc";
+               compatible = "simple-bus";
                ranges = <0 e0000000 00100000>;
                reg = <e0000000 00000200>;
                bus-frequency = <0>;
@@ -52,7 +108,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <e 8>;
@@ -61,7 +119,9 @@
                };
 
                i2c@3100 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <f 8>;
@@ -80,7 +140,6 @@
 
                /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
                usb@23000 {
-                       device_type = "usb";
                        compatible = "fsl-usb2-dr";
                        reg = <23000 1000>;
                        #address-cells = <1>;
@@ -91,11 +150,10 @@
                };
 
                mdio@24520 {
-                       device_type = "mdio";
-                       compatible = "gianfar";
-                       reg = <24520 20>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <24520 20>;
                        phy1: ethernet-phy@1 {
                                interrupt-parent = < &ipic >;
                                interrupts = <13 8>;
@@ -110,7 +168,8 @@
                        };
                };
 
-               ethernet@24000 {
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -121,7 +180,8 @@
                        phy-handle = < &phy1 >;
                };
 
-               ethernet@25000 {
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -132,7 +192,8 @@
                        phy-handle = < &phy4 >;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -141,7 +202,8 @@
                        interrupt-parent = < &ipic >;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -179,7 +241,8 @@
                };
        };
 
-       pci@e0008500 {
+       pci0: pci@e0008500 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc832x_mds.dts powerpc.git/arch/powerpc/boot/dts/mpc832x_mds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc832x_mds.dts  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc832x_mds.dts   2008-01-28 20:25:49.000000000 +0100
@@ -7,6 +7,18 @@
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+
+ * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
+ * this:
+ *
+ * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
+ * 2) Solder a wire from U61-21 to P19A-23.  P19 is a grid of pins on the board
+ *    next to the serial ports.
+ * 3) Solder a wire from U61-22 to P19K-22.
+ *
+ * Note that there's a typo in the schematic.  The board labels the last column
+ * of pins "P19K", but in the schematic, that column is called "P19J".  So if
+ * you're going by the schematic, the pin is called "P19J-K22".
  */
 
 / {
@@ -15,6 +27,14 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -59,7 +79,7 @@
                i2c@3000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <e 8>;
@@ -72,7 +92,8 @@
                        };
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -81,7 +102,8 @@
                        interrupt-parent = < &ipic >;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -159,6 +181,23 @@
                                        1 1e  1  0  1  0        /* TX_EN */
                                        1 1f  2  0  1  0>;/* CRS */
                        };
+                       pio5: ucc_pin@05 {
+                               pio-map = <
+                               /*
+                                *                    open       has
+                                *   port  pin  dir  drain  sel  irq
+                                */
+                                       2    0    1      0    2    0  /* TxD5 */
+                                       2    8    2      0    2    0  /* RxD5 */
+
+                                       2   1d    2      0    0    0  /* CTS5 */
+                                       2   1f    1      0    2    0  /* RTS5 */
+
+                                       2   18    2      0    0    0  /* CD */
+
+                               >;
+                       };
+
                };
        };
 
@@ -166,6 +205,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                device_type = "qe";
+               compatible = "fsl,qe";
                model = "QE";
                ranges = <0 e0100000 00100000>;
                reg = <e0100000 480>;
@@ -200,7 +240,6 @@
                };
 
                usb@6c0 {
-                       device_type = "usb";
                        compatible = "qe_udc";
                        reg = <6c0 40 8B00 100>;
                        interrupts = <b>;
@@ -208,48 +247,58 @@
                        mode = "slave";
                };
 
-               ucc@2200 {
+               enet0: ucc@2200 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <3>;
                        device-id = <3>;
                        reg = <2200 200>;
                        interrupts = <22>;
                        interrupt-parent = < &qeic >;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <19>;
-                       tx-clock = <1a>;
+                       rx-clock-name = "clk9";
+                       tx-clock-name = "clk10";
                        phy-handle = < &phy3 >;
                        pio-handle = < &pio3 >;
                };
 
-               ucc@3200 {
+               enet1: ucc@3200 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <4>;
                        device-id = <4>;
                        reg = <3200 200>;
                        interrupts = <23>;
                        interrupt-parent = < &qeic >;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <17>;
-                       tx-clock = <18>;
+                       rx-clock-name = "clk7";
+                       tx-clock-name = "clk8";
                        phy-handle = < &phy4 >;
                        pio-handle = < &pio4 >;
                };
 
+               ucc@2400 {
+                       device_type = "serial";
+                       compatible = "ucc_uart";
+                       model = "UCC";
+                       device-id = <5>;        /* The UCC number, 1-7*/
+                       port-number = <0>;      /* Which ttyQEx device */
+                       soft-uart;              /* We need Soft-UART */
+                       reg = <2400 200>;
+                       interrupts = <28>;      /* From Table 18-12 */
+                       interrupt-parent = < &qeic >;
+                       /*
+                        * For Soft-UART, we need to set TX to 1X, which
+                        * means specifying separate clock sources.
+                        */
+                       rx-clock-name = "brg5";
+                       tx-clock-name = "brg6";
+                       pio-handle = < &pio5 >;
+               };
+
+
                mdio@2320 {
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -283,7 +332,8 @@
                };
        };
 
-       pci@e0008500 {
+       pci0: pci@e0008500 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                                /* IDSEL 0x11 AD17 */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc832x_rdb.dts powerpc.git/arch/powerpc/boot/dts/mpc832x_rdb.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc832x_rdb.dts  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc832x_rdb.dts   2008-01-28 20:25:49.000000000 +0100
@@ -15,6 +15,14 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -52,7 +60,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <e 8>;
@@ -60,7 +70,8 @@
                        dfsrr;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -69,7 +80,8 @@
                        interrupt-parent = <&pic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -187,44 +199,34 @@
                        mode = "cpu";
                };
 
-               ucc@3000 {
+               enet0: ucc@3000 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <2>;
                        device-id = <2>;
                        reg = <3000 200>;
                        interrupts = <21>;
                        interrupt-parent = <&qeic>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <20>;
-                       tx-clock = <13>;
+                       rx-clock-name = "clk16";
+                       tx-clock-name = "clk3";
                        phy-handle = <&phy00>;
                        pio-handle = <&ucc2pio>;
                };
 
-               ucc@2200 {
+               enet1: ucc@2200 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <3>;
                        device-id = <3>;
                        reg = <2200 200>;
                        interrupts = <22>;
                        interrupt-parent = <&qeic>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <19>;
-                       tx-clock = <1a>;
+                       rx-clock-name = "clk9";
+                       tx-clock-name = "clk10";
                        phy-handle = <&phy04>;
                        pio-handle = <&ucc3pio>;
                };
@@ -262,7 +264,8 @@
                };
        };
 
-       pci@e0008500 {
+       pci0: pci@e0008500 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                                /* IDSEL 0x10 AD16 (USB) */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8349emitx.dts powerpc.git/arch/powerpc/boot/dts/mpc8349emitx.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8349emitx.dts 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8349emitx.dts  2008-01-28 20:25:49.000000000 +0100
@@ -14,6 +14,15 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -51,7 +60,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <e 8>;
@@ -60,7 +71,9 @@
                };
 
                i2c@3100 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <f 8>;
@@ -78,7 +91,6 @@
                };
 
                usb@22000 {
-                       device_type = "usb";
                        compatible = "fsl-usb2-mph";
                        reg = <22000 1000>;
                        #address-cells = <1>;
@@ -90,7 +102,6 @@
                };
 
                usb@23000 {
-                       device_type = "usb";
                        compatible = "fsl-usb2-dr";
                        reg = <23000 1000>;
                        #address-cells = <1>;
@@ -102,11 +113,10 @@
                };
 
                mdio@24520 {
-                       device_type = "mdio";
-                       compatible = "gianfar";
-                       reg = <24520 20>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <24520 20>;
 
                        /* Vitesse 8201 */
                        phy1c: ethernet-phy@1c {
@@ -115,27 +125,14 @@
                                reg = <1c>;
                                device_type = "ethernet-phy";
                        };
-
-                       /* Vitesse 7385 */
-                       phy1f: ethernet-phy@1f {
-                               interrupt-parent = < &ipic >;
-                               interrupts = <12 8>;
-                               reg = <1f>;
-                               device_type = "ethernet-phy";
-                       };
                };
 
-               ethernet@24000 {
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <24000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <20 8 21 8 22 8>;
                        interrupt-parent = < &ipic >;
@@ -143,27 +140,22 @@
                        linux,network-index = <0>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <25000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 8 24 8 25 8>;
                        interrupt-parent = < &ipic >;
-                       phy-handle = < &phy1f >;
+                       /* Vitesse 7385 isn't on the MDIO bus */
+                       fixed-link = <1 1 d#1000 0 0>;
                        linux,network-index = <1>;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -172,7 +164,8 @@
                        interrupt-parent = < &ipic >;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -203,7 +196,8 @@
                };
        };
 
-       pci@e0008500 {
+       pci0: pci@e0008500 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                                /* IDSEL 0x10 - SATA */
@@ -224,7 +218,8 @@
                device_type = "pci";
        };
 
-       pci@e0008600 {
+       pci1: pci@e0008600 {
+               cell-index = <2>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                                /* IDSEL 0x0E - MiniPCI Slot */
@@ -249,6 +244,21 @@
                device_type = "pci";
        };
 
-
-
+       localbus@e0005000 {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc8349e-localbus",
+                            "fsl,pq2pro-localbus";
+               reg = <e0005000 d8>;
+               ranges = <3 0 f0000000 210>;
+
+               pata@3,0 {
+                       compatible = "fsl,mpc8349emitx-pata", "ata-generic";
+                       reg = <3 0 10 3 20c 4>;
+                       reg-shift = <1>;
+                       pio-mode = <6>;
+                       interrupts = <17 8>;
+                       interrupt-parent = <&ipic>;
+               };
+       };
 };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8349emitxgp.dts powerpc.git/arch/powerpc/boot/dts/mpc8349emitxgp.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8349emitxgp.dts       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8349emitxgp.dts        2008-01-28 20:25:49.000000000 +0100
@@ -14,6 +14,13 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -51,7 +58,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <e 8>;
@@ -60,7 +69,9 @@
                };
 
                i2c@3100 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <f 8>;
@@ -78,7 +89,6 @@
                };
 
                usb@23000 {
-                       device_type = "usb";
                        compatible = "fsl-usb2-dr";
                        reg = <23000 1000>;
                        #address-cells = <1>;
@@ -90,11 +100,10 @@
                };
 
                mdio@24520 {
-                       device_type = "mdio";
-                       compatible = "gianfar";
-                       reg = <24520 20>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <24520 20>;
 
                        /* Vitesse 8201 */
                        phy1c: ethernet-phy@1c {
@@ -105,7 +114,8 @@
                        };
                };
 
-               ethernet@24000 {
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
@@ -117,7 +127,8 @@
                        linux,network-index = <0>;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -126,7 +137,8 @@
                        interrupt-parent = < &ipic >;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -157,7 +169,8 @@
                };
        };
 
-       pci@e0008600 {
+       pci0: pci@e0008600 {
+               cell-index = <2>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                                /* IDSEL 0x0F - PCI Slot */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc834x_mds.dts powerpc.git/arch/powerpc/boot/dts/mpc834x_mds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc834x_mds.dts  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc834x_mds.dts   2008-01-28 20:25:49.000000000 +0100
@@ -15,6 +15,15 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -59,7 +68,7 @@
                i2c@3000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <e 8>;
@@ -75,7 +84,7 @@
                i2c@3100 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <f 8>;
@@ -95,7 +104,6 @@
                /* phy type (ULPI or SERIAL) are only types supportted for MPH */
                /* port = 0 or 1 */
                usb@22000 {
-                       device_type = "usb";
                        compatible = "fsl-usb2-mph";
                        reg = <22000 1000>;
                        #address-cells = <1>;
@@ -107,7 +115,6 @@
                };
                /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
                usb@23000 {
-                       device_type = "usb";
                        compatible = "fsl-usb2-dr";
                        reg = <23000 1000>;
                        #address-cells = <1>;
@@ -119,11 +126,11 @@
                };
 
                mdio@24520 {
-                       device_type = "mdio";
-                       compatible = "gianfar";
-                       reg = <24520 20>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = < &ipic >;
                                interrupts = <11 8>;
@@ -138,17 +145,12 @@
                        };
                };
 
-               ethernet@24000 {
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <24000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <20 8 21 8 22 8>;
                        interrupt-parent = < &ipic >;
@@ -156,19 +158,12 @@
                        linux,network-index = <0>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <25000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 8 24 8 25 8>;
                        interrupt-parent = < &ipic >;
@@ -176,7 +171,8 @@
                        linux,network-index = <1>;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -185,7 +181,8 @@
                        interrupt-parent = < &ipic >;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -225,7 +222,8 @@
                };
        };
 
-       pci@e0008500 {
+       pci0: pci@e0008500 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
@@ -285,7 +283,8 @@
                device_type = "pci";
        };
 
-       pci@e0008600 {
+       pci1: pci@e0008600 {
+               cell-index = <2>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc836x_mds.dts powerpc.git/arch/powerpc/boot/dts/mpc836x_mds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc836x_mds.dts  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc836x_mds.dts   2008-01-28 20:25:49.000000000 +0100
@@ -20,6 +20,14 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -64,7 +72,7 @@
                i2c@3000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <e 8>;
@@ -80,7 +88,7 @@
                i2c@3100 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <f 8>;
@@ -88,7 +96,8 @@
                        dfsrr;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -97,7 +106,8 @@
                        interrupt-parent = < &ipic >;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -231,7 +241,6 @@
                };
 
                usb@6c0 {
-                       device_type = "usb";
                        compatible = "qe_udc";
                        reg = <6c0 40 8B00 100>;
                        interrupts = <b>;
@@ -239,45 +248,35 @@
                        mode = "slave";
                };
 
-               ucc@2000 {
+               enet0: ucc@2000 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <1>;
                        device-id = <1>;
                        reg = <2000 200>;
                        interrupts = <20>;
                        interrupt-parent = < &qeic >;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <0>;
-                       tx-clock = <19>;
+                       rx-clock-name = "none";
+                       tx-clock-name = "clk9";
                        phy-handle = < &phy0 >;
                        phy-connection-type = "rgmii-id";
                        pio-handle = < &pio1 >;
                };
 
-               ucc@3000 {
+               enet1: ucc@3000 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <2>;
                        device-id = <2>;
                        reg = <3000 200>;
                        interrupts = <21>;
                        interrupt-parent = < &qeic >;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <0>;
-                       tx-clock = <14>;
+                       rx-clock-name = "none";
+                       tx-clock-name = "clk4";
                        phy-handle = < &phy1 >;
                        phy-connection-type = "rgmii-id";
                        pio-handle = < &pio2 >;
@@ -316,7 +315,8 @@
                };
        };
 
-       pci@e0008500 {
+       pci0: pci@e0008500 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8377_mds.dts powerpc.git/arch/powerpc/boot/dts/mpc8377_mds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8377_mds.dts  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8377_mds.dts   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,279 @@
+/*
+ * MPC8377E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+       model = "fsl,mpc8377emds";
+       compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,8377@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <0x20>;
+                       i-cache-line-size = <0x20>;
+                       d-cache-size = <0x8000>;                // L1, 32K
+                       i-cache-size = <0x8000>;                // L1, 32K
+                       timebase-frequency = <0>;
+                       bus-frequency = <0>;
+                       clock-frequency = <0>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;  // 512MB at 0
+       };
+
+       soc@e0000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               device_type = "soc";
+               ranges = <0x0 0xe0000000 0x00100000>;
+               reg = <0xe0000000 0x00000200>;
+               bus-frequency = <0>;
+
+               wdt@200 {
+                       compatible = "mpc83xx_wdt";
+                       reg = <0x200 0x100>;
+               };
+
+               i2c@3000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3000 0x100>;
+                       interrupts = <0xe 0x8>;
+                       interrupt-parent = < &ipic >;
+                       dfsrr;
+               };
+
+               i2c@3100 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3100 0x100>;
+                       interrupts = <0xf 0x8>;
+                       interrupt-parent = < &ipic >;
+                       dfsrr;
+               };
+
+               spi@7000 {
+                       compatible = "fsl_spi";
+                       reg = <0x7000 0x1000>;
+                       interrupts = <0x10 0x8>;
+                       interrupt-parent = < &ipic >;
+                       mode = "cpu";
+               };
+
+               /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+               usb@23000 {
+                       compatible = "fsl-usb2-dr";
+                       reg = <0x23000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupt-parent = < &ipic >;
+                       interrupts = <0x26 0x8>;
+                       phy_type = "utmi_wide";
+               };
+
+               mdio@24520 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <0x24520 0x20>;
+                       phy2: ethernet-phy@2 {
+                               interrupt-parent = < &ipic >;
+                               interrupts = <0x11 0x8>;
+                               reg = <2>;
+                               device_type = "ethernet-phy";
+                       };
+                       phy3: ethernet-phy@3 {
+                               interrupt-parent = < &ipic >;
+                               interrupts = <0x12 0x8>;
+                               reg = <3>;
+                               device_type = "ethernet-phy";
+                       };
+               };
+
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x24000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
+                       phy-connection-type = "mii";
+                       interrupt-parent = < &ipic >;
+                       phy-handle = < &phy2 >;
+               };
+
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x25000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
+                       phy-connection-type = "mii";
+                       interrupt-parent = < &ipic >;
+                       phy-handle = < &phy3 >;
+               };
+
+               serial0: serial@4500 {
+                       cell-index = <0>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4500 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0x9 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               serial1: serial@4600 {
+                       cell-index = <1>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4600 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0xa 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               crypto@30000 {
+                       model = "SEC3";
+                       compatible = "talitos";
+                       reg = <0x30000 0x10000>;
+                       interrupts = <0xb 0x8>;
+                       interrupt-parent = < &ipic >;
+                       /* Rev. 3.0 geometry */
+                       num-channels = <4>;
+                       channel-fifo-len = <0x18>;
+                       exec-units-mask = <0x000001fe>;
+                       descriptor-types-mask = <0x03ab0ebf>;
+               };
+
+               sdhc@2e000 {
+                       model = "eSDHC";
+                       compatible = "fsl,esdhc";
+                       reg = <0x2e000 0x1000>;
+                       interrupts = <0x2a 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               sata@18000 {
+                       compatible = "fsl,mpc8379-sata";
+                       reg = <0x18000 0x1000>;
+                       interrupts = <0x2c 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               sata@19000 {
+                       compatible = "fsl,mpc8379-sata";
+                       reg = <0x19000 0x1000>;
+                       interrupts = <0x2d 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               /* IPIC
+                * interrupts cell = <intr #, sense>
+                * sense values match linux IORESOURCE_IRQ_* defines:
+                * sense == 8: Level, low assertion
+                * sense == 2: Edge, high-to-low change
+                */
+               ipic: pic@700 {
+                       compatible = "fsl,ipic";
+                       interrupt-controller;
+                       #address-cells = <0>;
+                       #interrupt-cells = <2>;
+                       reg = <0x700 0x100>;
+               };
+       };
+
+       pci0: pci@e0008500 {
+               cell-index = <0>;
+               interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+               interrupt-map = <
+
+                               /* IDSEL 0x11 */
+                                0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
+                                0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
+                                0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
+                                0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+                               /* IDSEL 0x12 */
+                                0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
+                                0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
+                                0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
+                                0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
+
+                               /* IDSEL 0x13 */
+                                0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
+                                0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
+                                0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
+                                0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
+
+                               /* IDSEL 0x15 */
+                                0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
+                                0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
+                                0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
+                                0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+                               /* IDSEL 0x16 */
+                                0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
+                                0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
+                                0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
+                                0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
+
+                               /* IDSEL 0x17 */
+                                0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
+                                0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
+                                0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
+                                0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
+
+                               /* IDSEL 0x18 */
+                                0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
+                                0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
+                                0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
+                                0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
+               interrupt-parent = < &ipic >;
+               interrupts = <0x42 0x8>;
+               bus-range = <0 0>;
+               ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+                         0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+                         0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+               clock-frequency = <0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               reg = <0xe0008500 0x100>;
+               compatible = "fsl,mpc8349-pci";
+               device_type = "pci";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8378_mds.dts powerpc.git/arch/powerpc/boot/dts/mpc8378_mds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8378_mds.dts  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8378_mds.dts   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,265 @@
+/*
+ * MPC8378E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+       model = "fsl,mpc8378emds";
+       compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,8378@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <0x20>;
+                       i-cache-line-size = <0x20>;
+                       d-cache-size = <0x8000>;                // L1, 32K
+                       i-cache-size = <0x8000>;                // L1, 32K
+                       timebase-frequency = <0>;
+                       bus-frequency = <0>;
+                       clock-frequency = <0>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;  // 512MB at 0
+       };
+
+       soc@e0000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               device_type = "soc";
+               ranges = <0x0 0xe0000000 0x00100000>;
+               reg = <0xe0000000 0x00000200>;
+               bus-frequency = <0>;
+
+               wdt@200 {
+                       compatible = "mpc83xx_wdt";
+                       reg = <0x200 0x100>;
+               };
+
+               i2c@3000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3000 0x100>;
+                       interrupts = <0xe 0x8>;
+                       interrupt-parent = < &ipic >;
+                       dfsrr;
+               };
+
+               i2c@3100 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3100 0x100>;
+                       interrupts = <0xf 0x8>;
+                       interrupt-parent = < &ipic >;
+                       dfsrr;
+               };
+
+               spi@7000 {
+                       compatible = "fsl_spi";
+                       reg = <0x7000 0x1000>;
+                       interrupts = <0x10 0x8>;
+                       interrupt-parent = < &ipic >;
+                       mode = "cpu";
+               };
+
+               /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+               usb@23000 {
+                       compatible = "fsl-usb2-dr";
+                       reg = <0x23000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupt-parent = < &ipic >;
+                       interrupts = <0x26 0x8>;
+                       phy_type = "utmi_wide";
+               };
+
+               mdio@24520 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <0x24520 0x20>;
+                       phy2: ethernet-phy@2 {
+                               interrupt-parent = < &ipic >;
+                               interrupts = <0x11 0x8>;
+                               reg = <2>;
+                               device_type = "ethernet-phy";
+                       };
+                       phy3: ethernet-phy@3 {
+                               interrupt-parent = < &ipic >;
+                               interrupts = <0x12 0x8>;
+                               reg = <3>;
+                               device_type = "ethernet-phy";
+                       };
+               };
+
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x24000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
+                       phy-connection-type = "mii";
+                       interrupt-parent = < &ipic >;
+                       phy-handle = < &phy2 >;
+               };
+
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x25000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
+                       phy-connection-type = "mii";
+                       interrupt-parent = < &ipic >;
+                       phy-handle = < &phy3 >;
+               };
+
+               serial0: serial@4500 {
+                       cell-index = <0>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4500 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0x9 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               serial1: serial@4600 {
+                       cell-index = <1>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4600 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0xa 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               crypto@30000 {
+                       model = "SEC3";
+                       compatible = "talitos";
+                       reg = <0x30000 0x10000>;
+                       interrupts = <0xb 0x8>;
+                       interrupt-parent = < &ipic >;
+                       /* Rev. 3.0 geometry */
+                       num-channels = <4>;
+                       channel-fifo-len = <0x18>;
+                       exec-units-mask = <0x000001fe>;
+                       descriptor-types-mask = <0x03ab0ebf>;
+               };
+
+               sdhc@2e000 {
+                       model = "eSDHC";
+                       compatible = "fsl,esdhc";
+                       reg = <0x2e000 0x1000>;
+                       interrupts = <0x2a 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               /* IPIC
+                * interrupts cell = <intr #, sense>
+                * sense values match linux IORESOURCE_IRQ_* defines:
+                * sense == 8: Level, low assertion
+                * sense == 2: Edge, high-to-low change
+                */
+               ipic: pic@700 {
+                       compatible = "fsl,ipic";
+                       interrupt-controller;
+                       #address-cells = <0>;
+                       #interrupt-cells = <2>;
+                       reg = <0x700 0x100>;
+               };
+       };
+
+       pci0: pci@e0008500 {
+               cell-index = <0>;
+               interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+               interrupt-map = <
+
+                               /* IDSEL 0x11 */
+                                0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
+                                0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
+                                0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
+                                0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+                               /* IDSEL 0x12 */
+                                0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
+                                0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
+                                0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
+                                0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
+
+                               /* IDSEL 0x13 */
+                                0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
+                                0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
+                                0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
+                                0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
+
+                               /* IDSEL 0x15 */
+                                0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
+                                0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
+                                0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
+                                0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+                               /* IDSEL 0x16 */
+                                0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
+                                0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
+                                0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
+                                0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
+
+                               /* IDSEL 0x17 */
+                                0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
+                                0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
+                                0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
+                                0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
+
+                               /* IDSEL 0x18 */
+                                0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
+                                0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
+                                0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
+                                0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
+               interrupt-parent = < &ipic >;
+               interrupts = <0x42 0x8>;
+               bus-range = <0 0>;
+               ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+                         0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+                         0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+               clock-frequency = <0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               reg = <0xe0008500 0x100>;
+               compatible = "fsl,mpc8349-pci";
+               device_type = "pci";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8379_mds.dts powerpc.git/arch/powerpc/boot/dts/mpc8379_mds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8379_mds.dts  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8379_mds.dts   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,293 @@
+/*
+ * MPC8379E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+       model = "fsl,mpc8379emds";
+       compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,8379@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <0x20>;
+                       i-cache-line-size = <0x20>;
+                       d-cache-size = <0x8000>;                // L1, 32K
+                       i-cache-size = <0x8000>;                // L1, 32K
+                       timebase-frequency = <0>;
+                       bus-frequency = <0>;
+                       clock-frequency = <0>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;  // 512MB at 0
+       };
+
+       soc@e0000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               device_type = "soc";
+               ranges = <0x0 0xe0000000 0x00100000>;
+               reg = <0xe0000000 0x00000200>;
+               bus-frequency = <0>;
+
+               wdt@200 {
+                       compatible = "mpc83xx_wdt";
+                       reg = <0x200 0x100>;
+               };
+
+               i2c@3000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3000 0x100>;
+                       interrupts = <0xe 0x8>;
+                       interrupt-parent = < &ipic >;
+                       dfsrr;
+               };
+
+               i2c@3100 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3100 0x100>;
+                       interrupts = <0xf 0x8>;
+                       interrupt-parent = < &ipic >;
+                       dfsrr;
+               };
+
+               spi@7000 {
+                       compatible = "fsl_spi";
+                       reg = <0x7000 0x1000>;
+                       interrupts = <0x10 0x8>;
+                       interrupt-parent = < &ipic >;
+                       mode = "cpu";
+               };
+
+               /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+               usb@23000 {
+                       compatible = "fsl-usb2-dr";
+                       reg = <0x23000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupt-parent = < &ipic >;
+                       interrupts = <0x26 0x8>;
+                       phy_type = "utmi_wide";
+               };
+
+               mdio@24520 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <0x24520 0x20>;
+                       phy2: ethernet-phy@2 {
+                               interrupt-parent = < &ipic >;
+                               interrupts = <0x11 0x8>;
+                               reg = <2>;
+                               device_type = "ethernet-phy";
+                       };
+                       phy3: ethernet-phy@3 {
+                               interrupt-parent = < &ipic >;
+                               interrupts = <0x12 0x8>;
+                               reg = <3>;
+                               device_type = "ethernet-phy";
+                       };
+               };
+
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x24000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
+                       phy-connection-type = "mii";
+                       interrupt-parent = < &ipic >;
+                       phy-handle = < &phy2 >;
+               };
+
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x25000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
+                       phy-connection-type = "mii";
+                       interrupt-parent = < &ipic >;
+                       phy-handle = < &phy3 >;
+               };
+
+               serial0: serial@4500 {
+                       cell-index = <0>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4500 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0x9 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               serial1: serial@4600 {
+                       cell-index = <1>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4600 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0xa 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               crypto@30000 {
+                       model = "SEC3";
+                       compatible = "talitos";
+                       reg = <0x30000 0x10000>;
+                       interrupts = <0xb 0x8>;
+                       interrupt-parent = < &ipic >;
+                       /* Rev. 3.0 geometry */
+                       num-channels = <4>;
+                       channel-fifo-len = <0x18>;
+                       exec-units-mask = <0x000001fe>;
+                       descriptor-types-mask = <0x03ab0ebf>;
+               };
+
+               sdhc@2e000 {
+                       model = "eSDHC";
+                       compatible = "fsl,esdhc";
+                       reg = <0x2e000 0x1000>;
+                       interrupts = <0x2a 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               sata@18000 {
+                       compatible = "fsl,mpc8379-sata";
+                       reg = <0x18000 0x1000>;
+                       interrupts = <0x2c 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               sata@19000 {
+                       compatible = "fsl,mpc8379-sata";
+                       reg = <0x19000 0x1000>;
+                       interrupts = <0x2d 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               sata@1a000 {
+                       compatible = "fsl,mpc8379-sata";
+                       reg = <0x1a000 0x1000>;
+                       interrupts = <0x2e 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               sata@1b000 {
+                       compatible = "fsl,mpc8379-sata";
+                       reg = <0x1b000 0x1000>;
+                       interrupts = <0x2f 0x8>;
+                       interrupt-parent = < &ipic >;
+               };
+
+               /* IPIC
+                * interrupts cell = <intr #, sense>
+                * sense values match linux IORESOURCE_IRQ_* defines:
+                * sense == 8: Level, low assertion
+                * sense == 2: Edge, high-to-low change
+                */
+               ipic: pic@700 {
+                       compatible = "fsl,ipic";
+                       interrupt-controller;
+                       #address-cells = <0>;
+                       #interrupt-cells = <2>;
+                       reg = <0x700 0x100>;
+               };
+       };
+
+       pci0: pci@e0008500 {
+               cell-index = <0>;
+               interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+               interrupt-map = <
+
+                               /* IDSEL 0x11 */
+                                0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
+                                0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
+                                0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
+                                0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+                               /* IDSEL 0x12 */
+                                0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
+                                0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
+                                0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
+                                0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
+
+                               /* IDSEL 0x13 */
+                                0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
+                                0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
+                                0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
+                                0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
+
+                               /* IDSEL 0x15 */
+                                0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
+                                0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
+                                0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
+                                0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+                               /* IDSEL 0x16 */
+                                0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
+                                0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
+                                0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
+                                0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
+
+                               /* IDSEL 0x17 */
+                                0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
+                                0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
+                                0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
+                                0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
+
+                               /* IDSEL 0x18 */
+                                0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
+                                0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
+                                0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
+                                0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
+               interrupt-parent = < &ipic >;
+               interrupts = <0x42 0x8>;
+               bus-range = <0 0>;
+               ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+                         0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+                         0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+               clock-frequency = <0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               reg = <0xe0008500 0x100>;
+               compatible = "fsl,mpc8349-pci";
+               device_type = "pci";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8540ads.dts powerpc.git/arch/powerpc/boot/dts/mpc8540ads.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8540ads.dts   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8540ads.dts    2008-01-28 20:25:49.000000000 +0100
@@ -16,6 +16,15 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               ethernet2 = &enet2;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -63,7 +72,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -74,9 +85,9 @@
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <5 1>;
@@ -97,64 +108,44 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <24000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <1d 2 1e 2 22 2>;
                        interrupt-parent = <&mpic>;
                        phy-handle = <&phy0>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <25000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 2 24 2 28 2>;
                        interrupt-parent = <&mpic>;
                        phy-handle = <&phy1>;
                };
 
-               ethernet@26000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet2: ethernet@26000 {
+                       cell-index = <2>;
                        device_type = "network";
                        model = "FEC";
                        compatible = "gianfar";
                        reg = <26000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <29 2>;
                        interrupt-parent = <&mpic>;
                        phy-handle = <&phy3>;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;       // reg base, size
@@ -163,7 +154,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;       // reg base, size
@@ -183,7 +175,8 @@
                };
        };
 
-       pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8541cds.dts powerpc.git/arch/powerpc/boot/dts/mpc8541cds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8541cds.dts   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8541cds.dts    2008-01-28 20:25:49.000000000 +0100
@@ -16,6 +16,15 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -63,7 +72,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -74,9 +85,9 @@
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <5 1>;
@@ -91,9 +102,8 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
@@ -104,9 +114,8 @@
                        phy-handle = <&phy0>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
@@ -117,7 +126,8 @@
                        phy-handle = <&phy1>;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;       // reg base, size
@@ -126,7 +136,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;       // reg base, size
@@ -183,7 +194,8 @@
                };
        };
 
-       pci1: pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                interrupt-map-mask = <1f800 0 0 7>;
                interrupt-map = <
 
@@ -250,11 +262,12 @@
                        #interrupt-cells = <2>;
                        compatible = "chrp,iic";
                        interrupts = <1>;
-                       interrupt-parent = <&pci1>;
+                       interrupt-parent = <&pci0>;
                };
        };
 
-       pci@e0009000 {
+       pci1: pci@e0009000 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8544ds.dts powerpc.git/arch/powerpc/boot/dts/mpc8544ds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8544ds.dts    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8544ds.dts     2008-01-28 20:25:49.000000000 +0100
@@ -15,6 +15,17 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               pci2 = &pci2;
+               pci3 = &pci3;
+       };
+
        cpus {
                #cpus = <1>;
                #address-cells = <1>;
@@ -64,7 +75,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -72,12 +85,23 @@
                        dfsrr;
                };
 
+               i2c@3100 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
+                       compatible = "fsl-i2c";
+                       reg = <3100 100>;
+                       interrupts = <2b 2>;
+                       interrupt-parent = <&mpic>;
+                       dfsrr;
+               };
+
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <a 1>;
@@ -92,9 +116,8 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
@@ -106,9 +129,8 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               ethernet@26000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@26000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
@@ -120,7 +142,8 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -129,7 +152,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -156,7 +180,8 @@
                };
        };
 
-       pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                compatible = "fsl,mpc8540-pci";
                device_type = "pci";
                interrupt-map-mask = <f800 0 0 7>;
@@ -187,7 +212,8 @@
                reg = <e0008000 1000>;
        };
 
-       pcie@e0009000 {
+       pci1: pcie@e0009000 {
+               cell-index = <1>;
                compatible = "fsl,mpc8548-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -223,7 +249,8 @@
                };
        };
 
-       pcie@e000a000 {
+       pci2: pcie@e000a000 {
+               cell-index = <2>;
                compatible = "fsl,mpc8548-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -259,7 +286,8 @@
                };
        };
 
-       pcie@e000b000 {
+       pci3: pcie@e000b000 {
+               cell-index = <3>;
                compatible = "fsl,mpc8548-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -276,9 +304,9 @@
                interrupt-map = <
                        // IDSEL 0x1c  USB
                        e000 0 0 1 &i8259 c 2
-                       e100 0 0 1 &i8259 9 2
-                       e200 0 0 1 &i8259 a 2
-                       e300 0 0 1 &i8259 b 2
+                       e100 0 0 2 &i8259 9 2
+                       e200 0 0 3 &i8259 a 2
+                       e300 0 0 4 &i8259 b 2
 
                        // IDSEL 0x1d  Audio
                        e800 0 0 1 &i8259 6 2
@@ -369,6 +397,5 @@
                                };
                        };
                };
-
        };
 };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8548cds.dts powerpc.git/arch/powerpc/boot/dts/mpc8548cds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8548cds.dts   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8548cds.dts    2008-01-28 20:25:49.000000000 +0100
@@ -16,6 +16,20 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+/*
+               ethernet2 = &enet2;
+               ethernet3 = &enet3;
+*/
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               pci2 = &pci2;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -63,7 +77,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -71,12 +87,23 @@
                        dfsrr;
                };
 
+               i2c@3100 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
+                       compatible = "fsl-i2c";
+                       reg = <3100 100>;
+                       interrupts = <2b 2>;
+                       interrupt-parent = <&mpic>;
+                       dfsrr;
+               };
+
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <5 1>;
@@ -103,9 +130,8 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -116,9 +142,8 @@
                        phy-handle = <&phy0>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -130,9 +155,8 @@
                };
 
 /* eTSEC 3/4 are currently broken
-               ethernet@26000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet2: ethernet@26000 {
+                       cell-index = <2>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -143,9 +167,8 @@
                        phy-handle = <&phy2>;
                };
 
-               ethernet@27000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet3: ethernet@27000 {
+                       cell-index = <3>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -157,7 +180,8 @@
                };
  */
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;       // reg base, size
@@ -166,7 +190,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;       // reg base, size
@@ -193,7 +218,8 @@
                };
        };
 
-       pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                        /* IDSEL 0x4 (PCIX Slot 2) */
@@ -342,7 +368,8 @@
                };
        };
 
-       pci@e0009000 {
+       pci1: pci@e0009000 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
@@ -366,7 +393,8 @@
                device_type = "pci";
        };
 
-       pcie@e000a000 {
+       pci2: pcie@e000a000 {
+               cell-index = <2>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8555cds.dts powerpc.git/arch/powerpc/boot/dts/mpc8555cds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8555cds.dts   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8555cds.dts    2008-01-28 20:25:49.000000000 +0100
@@ -16,6 +16,15 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -63,7 +72,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -74,9 +85,9 @@
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <5 1>;
@@ -91,9 +102,8 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
@@ -104,9 +114,8 @@
                        phy-handle = <&phy0>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
@@ -117,7 +126,8 @@
                        phy-handle = <&phy1>;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;       // reg base, size
@@ -126,7 +136,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;       // reg base, size
@@ -183,7 +194,8 @@
                };
        };
 
-       pci1: pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                interrupt-map-mask = <1f800 0 0 7>;
                interrupt-map = <
 
@@ -250,11 +262,12 @@
                        #interrupt-cells = <2>;
                        compatible = "chrp,iic";
                        interrupts = <1>;
-                       interrupt-parent = <&pci1>;
+                       interrupt-parent = <&pci0>;
                };
        };
 
-       pci@e0009000 {
+       pci1: pci@e0009000 {
+               cell-index = <1>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8560ads.dts powerpc.git/arch/powerpc/boot/dts/mpc8560ads.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8560ads.dts   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8560ads.dts    2008-01-28 20:25:49.000000000 +0100
@@ -16,6 +16,16 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               ethernet2 = &enet2;
+               ethernet3 = &enet3;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -63,11 +73,11 @@
                };
 
                mdio@24520 {
-                       device_type = "mdio";
-                       compatible = "gianfar";
-                       reg = <24520 20>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <5 1>;
@@ -94,36 +104,24 @@
                        };
                };
 
-               ethernet@24000 {
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <24000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <1d 2 1e 2 22 2>;
                        interrupt-parent = <&mpic>;
                        phy-handle = <&phy0>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <25000 1000>;
-                       /*
-                        * address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 2 24 2 28 2>;
                        interrupt-parent = <&mpic>;
@@ -174,7 +172,7 @@
                                compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
                        };
 
-                       serial@91a00 {
+                       serial0: serial@91a00 {
                                device_type = "serial";
                                compatible = "fsl,mpc8560-scc-uart",
                                             "fsl,cpm2-scc-uart";
@@ -186,7 +184,7 @@
                                interrupt-parent = <&cpmpic>;
                        };
 
-                       serial@91a20 {
+                       serial1: serial@91a20 {
                                device_type = "serial";
                                compatible = "fsl,mpc8560-scc-uart",
                                             "fsl,cpm2-scc-uart";
@@ -198,17 +196,11 @@
                                interrupt-parent = <&cpmpic>;
                        };
 
-                       ethernet@91320 {
+                       enet2: ethernet@91320 {
                                device_type = "network";
                                compatible = "fsl,mpc8560-fcc-enet",
                                             "fsl,cpm2-fcc-enet";
                                reg = <91320 20 88500 100 913b0 1>;
-                               /*
-                                * mac-address is deprecated and will be removed
-                                * in 2.6.25.  Only recent versions of
-                                * U-Boot support local-mac-address, however.
-                                */
-                               mac-address = [ 00 00 00 00 00 00 ];
                                local-mac-address = [ 00 00 00 00 00 00 ];
                                fsl,cpm-command = <16200300>;
                                interrupts = <21 8>;
@@ -216,17 +208,11 @@
                                phy-handle = <&phy2>;
                        };
 
-                       ethernet@91340 {
+                       enet3: ethernet@91340 {
                                device_type = "network";
                                compatible = "fsl,mpc8560-fcc-enet",
                                             "fsl,cpm2-fcc-enet";
                                reg = <91340 20 88600 100 913d0 1>;
-                               /*
-                                * mac-address is deprecated and will be removed
-                                * in 2.6.25.  Only recent versions of
-                                * U-Boot support local-mac-address, however.
-                                */
-                               mac-address = [ 00 00 00 00 00 00 ];
                                local-mac-address = [ 00 00 00 00 00 00 ];
                                fsl,cpm-command = <1a400300>;
                                interrupts = <22 8>;
@@ -236,7 +222,8 @@
                };
        };
 
-       pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                #interrupt-cells = <1>;
                #size-cells = <2>;
                #address-cells = <3>;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8568mds.dts powerpc.git/arch/powerpc/boot/dts/mpc8568mds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8568mds.dts   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8568mds.dts    2008-01-28 20:25:49.000000000 +0100
@@ -20,6 +20,17 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               ethernet2 = &enet2;
+               ethernet3 = &enet3;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -74,7 +85,7 @@
                i2c@3000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -90,7 +101,7 @@
                i2c@3100 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "i2c";
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <2b 2>;
@@ -101,9 +112,9 @@
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@7 {
                                interrupt-parent = <&mpic>;
                                interrupts = <1 1>;
@@ -130,45 +141,32 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
                        reg = <24000 1000>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <1d 2 1e 2 22 2>;
                        interrupt-parent = <&mpic>;
                        phy-handle = <&phy2>;
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
                        reg = <25000 1000>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 2 24 2 28 2>;
                        interrupt-parent = <&mpic>;
                        phy-handle = <&phy3>;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -183,7 +181,8 @@
                        fsl,has-rstcr;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -318,45 +317,35 @@
                        mode = "cpu";
                };
 
-               ucc@2000 {
+               enet2: ucc@2000 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <1>;
                        device-id = <1>;
                        reg = <2000 200>;
                        interrupts = <20>;
                        interrupt-parent = <&qeic>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <0>;
-                       tx-clock = <20>;
+                       rx-clock-name = "none";
+                       tx-clock-name = "clk16";
                        pio-handle = <&pio1>;
                        phy-handle = <&phy0>;
                        phy-connection-type = "rgmii-id";
                };
 
-               ucc@3000 {
+               enet3: ucc@3000 {
                        device_type = "network";
                        compatible = "ucc_geth";
                        model = "UCC";
+                       cell-index = <2>;
                        device-id = <2>;
                        reg = <3000 200>;
                        interrupts = <21>;
                        interrupt-parent = <&qeic>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
-                       rx-clock = <0>;
-                       tx-clock = <20>;
+                       rx-clock-name = "none";
+                       tx-clock-name = "clk16";
                        pio-handle = <&pio2>;
                        phy-handle = <&phy1>;
                        phy-connection-type = "rgmii-id";
@@ -366,7 +355,6 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <2120 18>;
-                       device_type = "mdio";
                        compatible = "ucc_geth_phy";
 
                        /* These are the same PHYs as on
@@ -410,7 +398,8 @@
 
        };
 
-       pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                        /* IDSEL 0x12 AD18 */
@@ -440,7 +429,8 @@
        };
 
        /* PCI Express */
-       pcie@e000a000 {
+       pci1: pcie@e000a000 {
+               cell-index = <2>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8572ds.dts powerpc.git/arch/powerpc/boot/dts/mpc8572ds.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8572ds.dts    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8572ds.dts     2008-01-28 20:25:49.000000000 +0100
@@ -15,6 +15,18 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               ethernet2 = &enet2;
+               ethernet3 = &enet3;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               pci2 = &pci2;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -69,7 +81,9 @@
                };
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -78,7 +92,9 @@
                };
 
                i2c@3100 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <2b 2>;
@@ -89,9 +105,9 @@
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <a 1>;
@@ -114,9 +130,8 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -128,9 +143,8 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -142,9 +156,8 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               ethernet@26000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet2: ethernet@26000 {
+                       cell-index = <2>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -156,9 +169,8 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               ethernet@27000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet3: ethernet@27000 {
+                       cell-index = <3>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "gianfar";
@@ -170,7 +182,8 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -179,7 +192,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -206,7 +220,8 @@
                };
        };
 
-       pcie@ffe08000 {
+       pci0: pcie@ffe08000 {
+               cell-index = <0>;
                compatible = "fsl,mpc8548-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -319,9 +334,9 @@
 
                        // IDSEL 0x1c  USB
                        e000 0 0 1 &i8259 c 2
-                       e100 0 0 1 &i8259 9 2
-                       e200 0 0 1 &i8259 a 2
-                       e300 0 0 1 &i8259 b 2
+                       e100 0 0 2 &i8259 9 2
+                       e200 0 0 3 &i8259 a 2
+                       e300 0 0 4 &i8259 b 2
 
                        // IDSEL 0x1d  Audio
                        e800 0 0 1 &i8259 6 2
@@ -415,7 +430,8 @@
 
        };
 
-       pcie@ffe09000 {
+       pci1: pcie@ffe09000 {
+               cell-index = <1>;
                compatible = "fsl,mpc8548-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -451,7 +467,8 @@
                };
        };
 
-       pcie@ffe0a000 {
+       pci2: pcie@ffe0a000 {
+               cell-index = <2>;
                compatible = "fsl,mpc8548-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -464,6 +481,7 @@
                clock-frequency = <1fca055>;
                interrupt-parent = <&mpic>;
                interrupts = <1b 2>;
+               interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <
                        /* IDSEL 0x0 */
                        0000 0 0 1 &mpic 0 1
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8610_hpcd.dts powerpc.git/arch/powerpc/boot/dts/mpc8610_hpcd.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8610_hpcd.dts 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8610_hpcd.dts  2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 /*
  * MPC8610 HPCD Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under the terms of the GNU General Public License Version 2 as published
@@ -15,6 +15,13 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -42,33 +49,42 @@
                #size-cells = <1>;
                #interrupt-cells = <2>;
                device_type = "soc";
+               compatible = "fsl,mpc8610-immr", "simple-bus";
                ranges = <0 e0000000 00100000>;
                reg = <e0000000 1000>;
                bus-frequency = <0>;
 
                i2c@3000 {
-                       device_type = "i2c";
-                       compatible = "fsl-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       cell-index = <0>;
+                       compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
                        interrupt-parent = <&mpic>;
                        dfsrr;
+
+                        cs4270:codec@4f {
+                               compatible = "cirrus,cs4270";
+                                reg = <4f>;
+                               /* MCLK source is a stand-alone oscillator */
+                               clock-frequency = <bb8000>;
+                        };
                };
 
                i2c@3100 {
-                       device_type = "i2c";
-                       compatible = "fsl-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       cell-index = <1>;
+                       compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <2b 2>;
                        interrupt-parent = <&mpic>;
                        dfsrr;
                };
 
-               serial@4500 {
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -77,7 +93,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -86,7 +103,6 @@
                        interrupt-parent = <&mpic>;
                };
 
-
                mpic: interrupt-controller@40000 {
                        clock-frequency = <0>;
                        interrupt-controller;
@@ -103,9 +119,113 @@
                        reg = <e0000 1000>;
                        fsl,has-rstcr;
                };
+
+               i2s@16000 {
+                       compatible = "fsl,mpc8610-ssi";
+                       cell-index = <0>;
+                       reg = <16000 100>;
+                       interrupt-parent = <&mpic>;
+                       interrupts = <3e 2>;
+                       fsl,mode = "i2s-slave";
+                       codec-handle = <&cs4270>;
+               };
+
+               ssi@16100 {
+                       compatible = "fsl,mpc8610-ssi";
+                       cell-index = <1>;
+                       reg = <16100 100>;
+                       interrupt-parent = <&mpic>;
+                       interrupts = <3f 2>;
+               };
+
+                dma@21300 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
+                        cell-index = <0>;
+                        reg = <21300 4>; /* DMA general status register */
+                        ranges = <0 21100 200>;
+
+                        dma-channel@0 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,eloplus-dma-channel";
+                               cell-index = <0>;
+                               reg = <0 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <14 2>;
+                        };
+                        dma-channel@1 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,eloplus-dma-channel";
+                               cell-index = <1>;
+                               reg = <80 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <15 2>;
+                        };
+                        dma-channel@2 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,eloplus-dma-channel";
+                               cell-index = <2>;
+                               reg = <100 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <16 2>;
+                        };
+                        dma-channel@3 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,eloplus-dma-channel";
+                               cell-index = <3>;
+                               reg = <180 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <17 2>;
+                        };
+                };
+
+                dma@c300 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+                        cell-index = <1>;
+                        reg = <c300 4>; /* DMA general status register */
+                        ranges = <0 c100 200>;
+
+                        dma-channel@0 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,mpc8540-dma-channel";
+                               cell-index = <0>;
+                               reg = <0 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <3c 2>;
+                        };
+                        dma-channel@1 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,mpc8540-dma-channel";
+                               cell-index = <1>;
+                               reg = <80 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <3d 2>;
+                        };
+                        dma-channel@2 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,mpc8540-dma-channel";
+                               cell-index = <2>;
+                               reg = <100 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <3e 2>;
+                        };
+                        dma-channel@3 {
+                               compatible = "fsl,mpc8610-dma-channel",
+                                       "fsl,mpc8540-dma-channel";
+                               cell-index = <3>;
+                               reg = <180 80>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <3f 2>;
+                        };
+                };
+
        };
 
-       pci@e0008000 {
+       pci0: pci@e0008000 {
+               cell-index = <0>;
                compatible = "fsl,mpc8610-pci";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -134,7 +254,8 @@
                        >;
        };
 
-       pcie@e000a000 {
+       pci1: pcie@e000a000 {
+               cell-index = <1>;
                compatible = "fsl,mpc8641-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc8641_hpcn.dts powerpc.git/arch/powerpc/boot/dts/mpc8641_hpcn.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc8641_hpcn.dts 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc8641_hpcn.dts  2008-01-28 20:25:49.000000000 +0100
@@ -16,6 +16,17 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               ethernet2 = &enet2;
+               ethernet3 = &enet3;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+               pci1 = &pci1;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -49,16 +60,60 @@
                reg = <00000000 40000000>;      // 1G at 0x0
        };
 
+       localbus@f8005000 {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc8641-localbus", "simple-bus";
+               reg = <f8005000 1000>;
+               interrupts = <13 2>;
+               interrupt-parent = <&mpic>;
+
+               ranges = <0 0 ff800000 00800000
+                         1 0 fe000000 01000000
+                         2 0 f8200000 00100000
+                         3 0 f8100000 00100000>;
+
+               flash@0,0 {
+                       compatible = "cfi-flash";
+                       reg = <0 0 00800000>;
+                       bank-width = <2>;
+                       device-width = <2>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       partition@0 {
+                               label = "kernel";
+                               reg = <00000000 00300000>;
+                       };
+                       partition@300000 {
+                               label = "firmware b";
+                               reg = <00300000 00100000>;
+                               read-only;
+                       };
+                       partition@400000 {
+                               label = "fs";
+                               reg = <00400000 00300000>;
+                       };
+                       partition@700000 {
+                               label = "firmware a";
+                               reg = <00700000 00100000>;
+                               read-only;
+                       };
+               };
+       };
+
        soc8641@f8000000 {
                #address-cells = <1>;
                #size-cells = <1>;
                device_type = "soc";
+               compatible = "simple-bus";
                ranges = <00000000 f8000000 00100000>;
                reg = <f8000000 00001000>;      // CCSRBAR
                bus-frequency = <0>;
 
                i2c@3000 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <0>;
                        compatible = "fsl-i2c";
                        reg = <3000 100>;
                        interrupts = <2b 2>;
@@ -67,7 +122,9 @@
                };
 
                i2c@3100 {
-                       device_type = "i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       cell-index = <1>;
                        compatible = "fsl-i2c";
                        reg = <3100 100>;
                        interrupts = <2b 2>;
@@ -78,9 +135,9 @@
                mdio@24520 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "gianfar";
+                       compatible = "fsl,gianfar-mdio";
                        reg = <24520 20>;
+
                        phy0: ethernet-phy@0 {
                                interrupt-parent = <&mpic>;
                                interrupts = <a 1>;
@@ -107,19 +164,12 @@
                        };
                };
 
-               ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet0: ethernet@24000 {
+                       cell-index = <0>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <24000 1000>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <1d 2 1e 2 22 2>;
                        interrupt-parent = <&mpic>;
@@ -127,19 +177,12 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               ethernet@25000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet1: ethernet@25000 {
+                       cell-index = <1>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <25000 1000>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 2 24 2 28 2>;
                        interrupt-parent = <&mpic>;
@@ -147,19 +190,12 @@
                        phy-connection-type = "rgmii-id";
                };
                
-               ethernet@26000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet2: ethernet@26000 {
+                       cell-index = <2>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <26000 1000>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <1F 2 20 2 21 2>;
                        interrupt-parent = <&mpic>;
@@ -167,26 +203,21 @@
                        phy-connection-type = "rgmii-id";
                };
 
-               ethernet@27000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               enet3: ethernet@27000 {
+                       cell-index = <3>;
                        device_type = "network";
                        model = "TSEC";
                        compatible = "gianfar";
                        reg = <27000 1000>;
-                       /*
-                        * mac-address is deprecated and will be removed
-                        * in 2.6.25.  Only recent versions of
-                        * U-Boot support local-mac-address, however.
-                        */
-                       mac-address = [ 00 00 00 00 00 00 ];
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <25 2 26 2 27 2>;
                        interrupt-parent = <&mpic>;
                        phy-handle = <&phy3>;
                        phy-connection-type = "rgmii-id";
                };
-               serial@4500 {
+
+               serial0: serial@4500 {
+                       cell-index = <0>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4500 100>;
@@ -195,7 +226,8 @@
                        interrupt-parent = <&mpic>;
                };
 
-               serial@4600 {
+               serial1: serial@4600 {
+                       cell-index = <1>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <4600 100>;
@@ -222,7 +254,8 @@
                };
        };
 
-       pcie@f8008000 {
+       pci0: pcie@f8008000 {
+               cell-index = <0>;
                compatible = "fsl,mpc8641-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
@@ -335,9 +368,9 @@
 
                        // IDSEL 0x1c  USB
                        e000 0 0 1 &i8259 c 2
-                       e100 0 0 1 &i8259 9 2
-                       e200 0 0 1 &i8259 a 2
-                       e300 0 0 1 &i8259 b 2
+                       e100 0 0 2 &i8259 9 2
+                       e200 0 0 3 &i8259 a 2
+                       e300 0 0 4 &i8259 b 2
 
                        // IDSEL 0x1d  Audio
                        e800 0 0 1 &i8259 6 2
@@ -430,7 +463,8 @@
 
        };
 
-       pcie@f8009000 {
+       pci1: pcie@f8009000 {
+               cell-index = <1>;
                compatible = "fsl,mpc8641-pcie";
                device_type = "pci";
                #interrupt-cells = <1>;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/mpc866ads.dts powerpc.git/arch/powerpc/boot/dts/mpc866ads.dts
--- linux-2.6.24/arch/powerpc/boot/dts/mpc866ads.dts    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/mpc866ads.dts     2008-01-28 20:25:49.000000000 +0100
@@ -12,7 +12,7 @@
 
 / {
        model = "MPC866ADS";
-       compatible = "mpc8xx";
+       compatible = "fsl,mpc866ads";
        #address-cells = <1>;
        #size-cells = <1>;
 
@@ -23,15 +23,15 @@
                PowerPC,866@0 {
                        device_type = "cpu";
                        reg = <0>;
-                       d-cache-line-size = <20>;       // 32 bytes
-                       i-cache-line-size = <20>;       // 32 bytes
+                       d-cache-line-size = <10>;       // 16 bytes
+                       i-cache-line-size = <10>;       // 16 bytes
                        d-cache-size = <2000>;          // L1, 8K
                        i-cache-size = <4000>;          // L1, 16K
                        timebase-frequency = <0>;
                        bus-frequency = <0>;
                        clock-frequency = <0>;
                        interrupts = <f 2>;     // decrementer interrupt
-                       interrupt-parent = <&Mpc8xx_pic>;
+                       interrupt-parent = <&PIC>;
                };
        };
 
@@ -40,107 +40,139 @@
                reg = <00000000 800000>;
        };
 
-       soc866@ff000000 {
+       localbus@ff000100 {
+               compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               reg = <ff000100 40>;
+
+               ranges = <
+                       1 0 ff080000 00008000
+                       5 0 ff0a0000 00008000
+               >;
+
+               board-control@1,0 {
+                       reg = <1 0 20 5 300 4>;
+                       compatible = "fsl,mpc866ads-bcsr";
+               };
+       };
+
+       soc@ff000000 {
                #address-cells = <1>;
                #size-cells = <1>;
                device_type = "soc";
                ranges = <0 ff000000 00100000>;
                reg = <ff000000 00000200>;
                bus-frequency = <0>;
-               mdio@e80 {
-                       device_type = "mdio";
-                       compatible = "fs_enet";
-                       reg = <e80 8>;
+
+               mdio@e00 {
+                       compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+                       reg = <e00 188>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       phy: ethernet-phy@f {
+                       PHY: ethernet-phy@f {
                                reg = <f>;
                                device_type = "ethernet-phy";
                        };
                };
 
-               fec@e00 {
+               ethernet@e00 {
                        device_type = "network";
-                       compatible = "fs_enet";
-                       model = "FEC";
-                       device-id = <1>;
+                       compatible = "fsl,mpc866-fec-enet",
+                                    "fsl,pq1-fec-enet";
                        reg = <e00 188>;
-                       mac-address = [ 00 00 0C 00 01 FD ];
+                       local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <3 1>;
-                       interrupt-parent = <&Mpc8xx_pic>;
-                       phy-handle = <&Phy>;
+                       interrupt-parent = <&PIC>;
+                       phy-handle = <&PHY>;
+                       linux,network-index = <0>;
                };
 
-               mpc8xx_pic: pic@ff000000 {
+               PIC: pic@0 {
                        interrupt-controller;
-                       #address-cells = <0>;
                        #interrupt-cells = <2>;
                        reg = <0 24>;
-                       device_type = "mpc8xx-pic";
-                       compatible = "CPM";
+                       compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
                };
 
-               cpm@ff000000 {
+               cpm@9c0 {
                        #address-cells = <1>;
                        #size-cells = <1>;
-                       device_type = "cpm";
-                       model = "CPM";
-                       ranges = <0 0 4000>;
-                       reg = <860 f0>;
-                       command-proc = <9c0>;
+                       compatible = "fsl,mpc866-cpm", "fsl,cpm1";
+                       ranges;
+                       reg = <9c0 40>;
                        brg-frequency = <0>;
                        interrupts = <0 2>;     // cpm error interrupt
-                       interrupt-parent = <&Cpm_pic>;
+                       interrupt-parent = <&CPM_PIC>;
 
-                       cpm_pic: pic@930 {
+                       muram@2000 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 2000 2000>;
+
+                               data@0 {
+                                       compatible = "fsl,cpm-muram-data";
+                                       reg = <0 1c00>;
+                               };
+                       };
+
+                       brg@9f0 {
+                               compatible = "fsl,mpc866-brg",
+                                            "fsl,cpm1-brg",
+                                            "fsl,cpm-brg";
+                               reg = <9f0 10>;
+                               clock-frequency = <0>;
+                       };
+
+                       CPM_PIC: pic@930 {
                                interrupt-controller;
                                #address-cells = <0>;
-                               #interrupt-cells = <2>;
+                               #interrupt-cells = <1>;
                                interrupts = <5 2 0 2>;
-                               interrupt-parent = <&Mpc8xx_pic>;
+                               interrupt-parent = <&PIC>;
                                reg = <930 20>;
-                               device_type = "cpm-pic";
-                               compatible = "CPM";
+                               compatible = "fsl,mpc866-cpm-pic",
+                                            "fsl,cpm1-pic";
                        };
 
-                       smc@a80 {
+
+                       serial@a80 {
                                device_type = "serial";
-                               compatible = "cpm_uart";
-                               model = "SMC";
-                               device-id = <1>;
+                               compatible = "fsl,mpc866-smc-uart",
+                                            "fsl,cpm1-smc-uart";
                                reg = <a80 10 3e80 40>;
-                               clock-setup = <00ffffff 0>;
-                               rx-clock = <1>;
-                               tx-clock = <1>;
-                               current-speed = <0>;
-                               interrupts = <4 3>;
-                               interrupt-parent = <&Cpm_pic>;
+                               interrupts = <4>;
+                               interrupt-parent = <&CPM_PIC>;
+                               fsl,cpm-brg = <1>;
+                               fsl,cpm-command = <0090>;
                        };
 
-                       smc@a90 {
+                       serial@a90 {
                                device_type = "serial";
-                               compatible = "cpm_uart";
-                               model = "SMC";
-                               device-id = <2>;
-                               reg = <a90 20 3f80 40>;
-                               clock-setup = <ff00ffff 90000>;
-                               rx-clock = <2>;
-                               tx-clock = <2>;
-                               current-speed = <0>;
-                               interrupts = <3 3>;
-                               interrupt-parent = <&Cpm_pic>;
+                               compatible = "fsl,mpc866-smc-uart",
+                                            "fsl,cpm1-smc-uart";
+                               reg = <a90 10 3f80 40>;
+                               interrupts = <3>;
+                               interrupt-parent = <&CPM_PIC>;
+                               fsl,cpm-brg = <2>;
+                               fsl,cpm-command = <00d0>;
                        };
 
-                       scc@a00 {
+                       ethernet@a00 {
                                device_type = "network";
-                               compatible = "fs_enet";
-                               model = "SCC";
-                               device-id = <1>;
-                               reg = <a00 18 3c00 80>;
-                               mac-address = [ 00 00 0C 00 03 FD ];
-                               interrupts = <1e 3>;
-                               interrupt-parent = <&Cpm_pic>;
+                               compatible = "fsl,mpc866-scc-enet",
+                                            "fsl,cpm1-scc-enet";
+                               reg = <a00 18 3c00 100>;
+                               local-mac-address = [ 00 00 00 00 00 00 ];
+                               interrupts = <1e>;
+                               interrupt-parent = <&CPM_PIC>;
+                               fsl,cpm-command = <0000>;
+                               linux,network-index = <1>;
                        };
                };
        };
+
+       chosen {
+               linux,stdout-path = "/soc/cpm/serial@a80";
+       };
 };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/rainier.dts powerpc.git/arch/powerpc/boot/dts/rainier.dts
--- linux-2.6.24/arch/powerpc/boot/dts/rainier.dts      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/rainier.dts       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,353 @@
+/*
+ * Device Tree Source for AMCC Rainier
+ *
+ * Based on Sequoia code
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ */
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       model = "amcc,rainier";
+       compatible = "amcc,rainier";
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               ethernet1 = &EMAC1;
+               serial0 = &UART0;
+               serial1 = &UART1;
+               serial2 = &UART2;
+               serial3 = &UART3;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       model = "PowerPC,440GRx";
+                       reg = <0>;
+                       clock-frequency = <0>; /* Filled in by zImage */
+                       timebase-frequency = <0>; /* Filled in by zImage */
+                       i-cache-line-size = <20>;
+                       d-cache-line-size = <20>;
+                       i-cache-size = <8000>;
+                       d-cache-size = <8000>;
+                       dcr-controller;
+                       dcr-access-method = "native";
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0 0>; /* Filled in by zImage */
+       };
+
+       UIC0: interrupt-controller0 {
+               compatible = "ibm,uic-440grx","ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0c0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+       UIC1: interrupt-controller1 {
+               compatible = "ibm,uic-440grx","ibm,uic";
+               interrupt-controller;
+               cell-index = <1>;
+               dcr-reg = <0d0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1e 4 1f 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       UIC2: interrupt-controller2 {
+               compatible = "ibm,uic-440grx","ibm,uic";
+               interrupt-controller;
+               cell-index = <2>;
+               dcr-reg = <0e0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1c 4 1d 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       SDR0: sdr {
+               compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
+               dcr-reg = <00e 002>;
+       };
+
+       CPR0: cpr {
+               compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
+               dcr-reg = <00c 002>;
+       };
+
+       plb {
+               compatible = "ibm,plb-440grx", "ibm,plb4";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <0>; /* Filled in by zImage */
+
+               SDRAM0: sdram {
+                       compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
+                       dcr-reg = <010 2>;
+               };
+
+               DMA0: dma {
+                       compatible = "ibm,dma-440grx", "ibm,dma-4xx";
+                       dcr-reg = <100 027>;
+               };
+
+               MAL0: mcmal {
+                       compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
+                       dcr-reg = <180 62>;
+                       num-tx-chans = <2>;
+                       num-rx-chans = <2>;
+                       interrupt-parent = <&MAL0>;
+                       interrupts = <0 1 2 3 4>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+                                       /*RXEOB*/ 1 &UIC0 b 4
+                                       /*SERR*/  2 &UIC1 0 4
+                                       /*TXDE*/  3 &UIC1 1 4
+                                       /*RXDE*/  4 &UIC1 2 4>;
+                       interrupt-map-mask = <ffffffff>;
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-440grx", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <00000000 1 00000000 80000000
+                                 80000000 1 80000000 80000000>;
+                       interrupt-parent = <&UIC1>;
+                       interrupts = <7 4>;
+                       clock-frequency = <0>; /* Filled in by zImage */
+
+                       EBC0: ebc {
+                               compatible = "ibm,ebc-440grx", "ibm,ebc";
+                               dcr-reg = <012 2>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               interrupts = <5 1>;
+                               interrupt-parent = <&UIC1>;
+
+                               nor_flash@0,0 {
+                                       compatible = "amd,s29gl256n", "cfi-flash";
+                                       bank-width = <2>;
+                                       reg = <0 000000 4000000>;
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       partition@0 {
+                                               label = "Kernel";
+                                               reg = <0 180000>;
+                                       };
+                                       partition@180000 {
+                                               label = "ramdisk";
+                                               reg = <180000 200000>;
+                                       };
+                                       partition@380000 {
+                                               label = "file system";
+                                               reg = <380000 3aa0000>;
+                                       };
+                                       partition@3e20000 {
+                                               label = "kozio";
+                                               reg = <3e20000 140000>;
+                                       };
+                                       partition@3f60000 {
+                                               label = "env";
+                                               reg = <3f60000 40000>;
+                                       };
+                                       partition@3fa0000 {
+                                               label = "u-boot";
+                                               reg = <3fa0000 60000>;
+                                       };
+                               };
+
+                       };
+
+                       UART0: serial@ef600300 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600300 8>;
+                               virtual-reg = <ef600300>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               current-speed = <1c200>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0 4>;
+                       };
+
+                       UART1: serial@ef600400 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600400 8>;
+                               virtual-reg = <ef600400>;
+                               clock-frequency = <0>;
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1 4>;
+                       };
+
+                       UART2: serial@ef600500 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600500 8>;
+                               virtual-reg = <ef600500>;
+                               clock-frequency = <0>;
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <3 4>;
+                       };
+
+                       UART3: serial@ef600600 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600600 8>;
+                               virtual-reg = <ef600600>;
+                               clock-frequency = <0>;
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <4 4>;
+                       };
+
+                       IIC0: i2c@ef600700 {
+                               device_type = "i2c";
+                               compatible = "ibm,iic-440grx", "ibm,iic";
+                               reg = <ef600700 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <2 4>;
+                       };
+
+                       IIC1: i2c@ef600800 {
+                               device_type = "i2c";
+                               compatible = "ibm,iic-440grx", "ibm,iic";
+                               reg = <ef600800 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <7 4>;
+                       };
+
+                       ZMII0: emac-zmii@ef600d00 {
+                               device_type = "zmii-interface";
+                               compatible = "ibm,zmii-440grx", "ibm,zmii";
+                               reg = <ef600d00 c>;
+                       };
+
+                       RGMII0: emac-rgmii@ef601000 {
+                               device_type = "rgmii-interface";
+                               compatible = "ibm,rgmii-440grx", "ibm,rgmii";
+                               reg = <ef601000 8>;
+                               has-mdio;
+                       };
+
+                       EMAC0: ethernet@ef600e00 {
+                               linux,network-index = <0>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+                               interrupt-parent = <&EMAC0>;
+                               interrupts = <0 1>;
+                               #interrupt-cells = <1>;
+                               #address-cells = <0>;
+                               #size-cells = <0>;
+                               interrupt-map = </*Status*/ 0 &UIC0 18 4
+                                               /*Wake*/  1 &UIC1 1d 4>;
+                               reg = <ef600e00 70>;
+                               local-mac-address = [000000000000];
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <0>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rgmii";
+                               phy-map = <00000000>;
+                               zmii-device = <&ZMII0>;
+                               zmii-channel = <0>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <0>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                       };
+
+                       EMAC1: ethernet@ef600f00 {
+                               linux,network-index = <1>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+                               interrupt-parent = <&EMAC1>;
+                               interrupts = <0 1>;
+                               #interrupt-cells = <1>;
+                               #address-cells = <0>;
+                               #size-cells = <0>;
+                               interrupt-map = </*Status*/ 0 &UIC0 19 4
+                                               /*Wake*/  1 &UIC1 1f 4>;
+                               reg = <ef600f00 70>;
+                               local-mac-address = [000000000000];
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <1>;
+                               mal-rx-channel = <1>;
+                               cell-index = <1>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rgmii";
+                               phy-map = <00000000>;
+                               zmii-device = <&ZMII0>;
+                               zmii-channel = <1>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <1>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                       };
+               };
+
+               PCI0: pci@1ec000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
+                       primary;
+                       reg = <1 eec00000 8     /* Config space access */
+                              1 eed00000 4     /* IACK */
+                              1 eed00000 4     /* Special cycle */
+                              1 ef400000 40>;  /* Internal registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed. Chip supports a second
+                        * IO range but we don't use it for now
+                        */
+                       ranges = <02000000 0 80000000 1 80000000 0 10000000
+                               01000000 0 00000000 1 e8000000 0 00100000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* All PCI interrupts are routed to IRQ 67 */
+                       interrupt-map-mask = <0000 0 0 0>;
+                       interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+               };
+       };
+
+       chosen {
+               linux,stdout-path = "/plb/opb/serial@ef600300";
+               bootargs = "console=ttyS0,115200";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/sequoia.dts powerpc.git/arch/powerpc/boot/dts/sequoia.dts
--- linux-2.6.24/arch/powerpc/boot/dts/sequoia.dts      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/sequoia.dts       2008-01-28 20:25:49.000000000 +0100
@@ -17,14 +17,24 @@
        #size-cells = <1>;
        model = "amcc,sequoia";
        compatible = "amcc,sequoia";
-       dcr-parent = <&/cpus/PowerPC,440EPx@0>;
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               ethernet1 = &EMAC1;
+               serial0 = &UART0;
+               serial1 = &UART1;
+               serial2 = &UART2;
+               serial3 = &UART3;
+       };
 
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
 
-               PowerPC,440EPx@0 {
+               cpu@0 {
                        device_type = "cpu";
+                       model = "PowerPC,440EPx";
                        reg = <0>;
                        clock-frequency = <0>; /* Filled in by zImage */
                        timebase-frequency = <0>; /* Filled in by zImage */
@@ -94,7 +104,6 @@
                clock-frequency = <0>; /* Filled in by zImage */
 
                SDRAM0: sdram {
-                       device_type = "memory-controller";
                        compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
                        dcr-reg = <010 2>;
                };
@@ -122,6 +131,13 @@
                        interrupt-map-mask = <ffffffff>;
                };
 
+               USB1: usb@e0000400 {
+                       compatible = "ohci-be";
+                       reg = <0 e0000400 60>;
+                       interrupt-parent = <&UIC0>;
+                       interrupts = <15 8>;
+               };
+
                POB0: opb {
                        compatible = "ibm,opb-440epx", "ibm,opb";
                        #address-cells = <1>;
@@ -308,6 +324,33 @@
                                has-new-stacr-staopc;
                        };
                };
+
+               PCI0: pci@1ec000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
+                       primary;
+                       reg = <1 eec00000 8     /* Config space access */
+                              1 eed00000 4     /* IACK */
+                              1 eed00000 4     /* Special cycle */
+                              1 ef400000 40>;  /* Internal registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed. Chip supports a second
+                        * IO range but we don't use it for now
+                        */
+                       ranges = <02000000 0 80000000 1 80000000 0 10000000
+                               01000000 0 00000000 1 e8000000 0 00100000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       /* All PCI interrupts are routed to IRQ 67 */
+                       interrupt-map-mask = <0000 0 0 0>;
+                       interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+               };
        };
 
        chosen {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/storcenter.dts powerpc.git/arch/powerpc/boot/dts/storcenter.dts
--- linux-2.6.24/arch/powerpc/boot/dts/storcenter.dts   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/storcenter.dts    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,138 @@
+/*
+ * Device Tree Source for IOMEGA StorCenter
+ *
+ * Copyright 2007 Oyvind Repvik
+ * Copyright 2007 Jon Loeliger
+ *
+ * Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+       model = "StorCenter";
+       compatible = "storcenter";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,8241@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       clock-frequency = <d# 200000000>;       /* Hz */
+                       timebase-frequency = <d# 25000000>;     /* Hz */
+                       bus-frequency = <0>;    /* from bootwrapper */
+                       i-cache-line-size = <d# 32>;    /* bytes */
+                       d-cache-line-size = <d# 32>;    /* bytes */
+                       i-cache-size = <4000>;
+                       d-cache-size = <4000>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <00000000 04000000>;      /* 64MB @ 0x0 */
+       };
+
+       soc@fc000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               device_type = "soc";
+               compatible = "fsl,mpc8241", "mpc10x";
+               store-gathering = <0>; /* 0 == off, !0 == on */
+               ranges = <0 fc000000 100000>;
+               reg = <fc000000 100000>;        /* EUMB */
+               bus-frequency = <0>;            /* fixed by loader */
+
+               i2c@3000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl-i2c";
+                       reg = <3000 100>;
+                       interrupts = <5 2>;
+                       interrupt-parent = <&mpic>;
+
+                       rtc@68 {
+                               compatible = "dallas,ds1337";
+                               reg = <68>;
+                       };
+               };
+
+               serial0: serial@4500 {
+                       cell-index = <0>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <4500 20>;
+                       clock-frequency = <d# 97553800>; /* Hz */
+                       current-speed = <d# 115200>;
+                       interrupts = <9 2>;
+                       interrupt-parent = <&mpic>;
+               };
+
+               serial1: serial@4600 {
+                       cell-index = <1>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <4600 20>;
+                       clock-frequency = <d# 97553800>; /* Hz */
+                       current-speed = <d# 9600>;
+                       interrupts = <a 2>;
+                       interrupt-parent = <&mpic>;
+               };
+
+               mpic: interrupt-controller@40000 {
+                       #interrupt-cells = <2>;
+                       device_type = "open-pic";
+                       compatible = "chrp,open-pic";
+                       interrupt-controller;
+                       reg = <40000 40000>;
+               };
+
+       };
+
+       pci0: pci@fe800000 {
+               #address-cells = <3>;
+               #size-cells = <2>;
+               #interrupt-cells = <1>;
+               device_type = "pci";
+               compatible = "mpc10x-pci";
+               reg = <fe800000 1000>;
+               ranges = <01000000 0        0 fe000000 0 00c00000
+                         02000000 0 80000000 80000000 0 70000000>;
+               bus-range = <0 ff>;
+               clock-frequency = <d# 97553800>; /* Hz */
+               interrupt-parent = <&mpic>;
+               interrupt-map-mask = <f800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 13 - IDE */
+                       6800 0 0 1 &mpic 0 1
+                       6800 0 0 2 &mpic 0 1
+                       6800 0 0 3 &mpic 0 1
+                       /* IDSEL 14 - USB */
+                       7000 0 0 1 &mpic 0 1
+                       7000 0 0 2 &mpic 0 1
+                       7000 0 0 3 &mpic 0 1
+                       7000 0 0 4 &mpic 0 1
+                       /* IDSEL 15 - ETH */
+                       7800 0 0 1 &mpic 0 1
+                       7800 0 0 2 &mpic 0 1
+                       7800 0 0 3 &mpic 0 1
+                       7800 0 0 4 &mpic 0 1
+               >;
+       };
+
+       chosen {
+               linux,stdout-path = "/soc/serial@4500";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/taishan.dts powerpc.git/arch/powerpc/boot/dts/taishan.dts
--- linux-2.6.24/arch/powerpc/boot/dts/taishan.dts      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/taishan.dts       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,383 @@
+/*
+ * Device Tree Source for IBM/AMCC Taishan
+ *
+ * Copyright 2007 IBM Corp.
+ * Hugh Blemings <hugh@au.ibm.com> based off code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       model = "amcc,taishan";
+       compatible = "amcc,taishan";
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC2;
+               ethernet1 = &EMAC3;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       model = "PowerPC,440GX";
+                       reg = <0>;
+                       clock-frequency = <2FAF0800>; // 800MHz
+                       timebase-frequency = <0>; // Filled in by zImage
+                       i-cache-line-size = <32>;
+                       d-cache-line-size = <32>;
+                       i-cache-size = <8000>; /* 32 kB */
+                       d-cache-size = <8000>; /* 32 kB */
+                       dcr-controller;
+                       dcr-access-method = "native";
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0 0>; // Filled in by zImage
+       };
+
+
+       UICB0: interrupt-controller-base {
+               compatible = "ibm,uic-440gx", "ibm,uic";
+               interrupt-controller;
+               cell-index = <3>;
+               dcr-reg = <200 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+
+       UIC0: interrupt-controller0 {
+               compatible = "ibm,uic-440gx", "ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0c0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <01 4 00 4>; /* cascade - first non-critical */
+               interrupt-parent = <&UICB0>;
+
+       };
+
+       UIC1: interrupt-controller1 {
+               compatible = "ibm,uic-440gx", "ibm,uic";
+               interrupt-controller;
+               cell-index = <1>;
+               dcr-reg = <0d0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <03 4 02 4>; /* cascade */
+               interrupt-parent = <&UICB0>;
+       };
+
+       UIC2: interrupt-controller2 {
+               compatible = "ibm,uic-440gx", "ibm,uic";
+               interrupt-controller;
+               cell-index = <2>; /* was 1 */
+               dcr-reg = <210 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <05 4 04 4>; /* cascade */
+               interrupt-parent = <&UICB0>;
+       };
+
+
+       CPC0: cpc {
+               compatible = "ibm,cpc-440gp";
+               dcr-reg = <0b0 003 0e0 010>;
+               // FIXME: anything else?
+       };
+
+       plb {
+               compatible = "ibm,plb-440gx", "ibm,plb4";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <9896800>; // 160MHz
+
+               SDRAM0: memory-controller {
+                       compatible = "ibm,sdram-440gp";
+                       dcr-reg = <010 2>;
+                       // FIXME: anything else?
+               };
+
+               SRAM0: sram {
+                       compatible = "ibm,sram-440gp";
+                       dcr-reg = <020 8 00a 1>;
+               };
+
+               DMA0: dma {
+                       // FIXME: ???
+                       compatible = "ibm,dma-440gp";
+                       dcr-reg = <100 027>;
+               };
+
+               MAL0: mcmal {
+                       compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
+                       dcr-reg = <180 62>;
+                       num-tx-chans = <4>;
+                       num-rx-chans = <4>;
+                       interrupt-parent = <&MAL0>;
+                       interrupts = <0 1 2 3 4>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+                                        /*RXEOB*/ 1 &UIC0 b 4
+                                        /*SERR*/  2 &UIC1 0 4
+                                        /*TXDE*/  3 &UIC1 1 4
+                                        /*RXDE*/  4 &UIC1 2 4>;
+                       interrupt-map-mask = <ffffffff>;
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-440gx", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       /* Wish there was a nicer way of specifying a full 32-bit
+                          range */
+                       ranges = <00000000 1 00000000 80000000
+                                 80000000 1 80000000 80000000>;
+                       dcr-reg = <090 00b>;
+                       interrupt-parent = <&UIC1>;
+                       interrupts = <7 4>;
+                       clock-frequency = <4C4B400>; // 80MHz
+
+
+                       EBC0: ebc {
+                               compatible = "ibm,ebc-440gx", "ibm,ebc";
+                               dcr-reg = <012 2>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               clock-frequency = <4C4B400>; // 80MHz
+
+                               /* ranges property is supplied by zImage
+                                * based on firmware's configuration of the
+                                * EBC bridge */
+
+                               interrupts = <5 4>;
+                               interrupt-parent = <&UIC1>;
+
+                               /* TODO: Add other EBC devices */
+                       };
+
+
+
+                       UART0: serial@40000200 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <40000200 8>;
+                               virtual-reg = <e0000200>;
+                               clock-frequency = <A8C000>;
+                               current-speed = <1C200>; /* 115200 */
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0 4>;
+                       };
+
+                       UART1: serial@40000300 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <40000300 8>;
+                               virtual-reg = <e0000300>;
+                               clock-frequency = <A8C000>;
+                               current-speed = <1C200>; /* 115200 */
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1 4>;
+                       };
+
+                       IIC0: i2c@40000400 {
+                               /* FIXME */
+                               device_type = "i2c";
+                               compatible = "ibm,iic-440gp", "ibm,iic";
+                               reg = <40000400 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <2 4>;
+                       };
+                       IIC1: i2c@40000500 {
+                               /* FIXME */
+                               device_type = "i2c";
+                               compatible = "ibm,iic-440gp", "ibm,iic";
+                               reg = <40000500 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <3 4>;
+                       };
+
+                       GPIO0: gpio@40000700 {
+                               /* FIXME */
+                               compatible = "ibm,gpio-440gp";
+                               reg = <40000700 20>;
+                       };
+
+                       ZMII0: emac-zmii@40000780 {
+                               device_type = "zgmii-interface";
+                               compatible = "ibm,zmii-440gx", "ibm,zmii";
+                               reg = <40000780 c>;
+                       };
+
+                       RGMII0: emac-rgmii@40000790 {
+                               device_type = "rgmii-interface";
+                               compatible = "ibm,rgmii";
+                               reg = <40000790 8>;
+                       };
+
+
+                       EMAC0: ethernet@40000800 {
+                               unused = <1>;
+                               linux,network-index = <2>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440gx", "ibm,emac4";
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <1c 4 1d 4>;
+                               reg = <40000800 70>;
+                               local-mac-address = [000000000000]; // Filled in by zImage
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <0>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rmii";
+                               phy-map = <00000001>;
+                               zmii-device = <&ZMII0>;
+                               zmii-channel = <0>;
+                       };
+                       EMAC1: ethernet@40000900 {
+                               unused = <1>;
+                               linux,network-index = <3>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440gx", "ibm,emac4";
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <1e 4 1f 4>;
+                               reg = <40000900 70>;
+                               local-mac-address = [000000000000]; // Filled in by zImage
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <1>;
+                               mal-rx-channel = <1>;
+                               cell-index = <1>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rmii";
+                               phy-map = <00000001>;
+                               zmii-device = <&ZMII0>;
+                               zmii-channel = <1>;
+                       };
+
+                       EMAC2: ethernet@40000c00 {
+                               linux,network-index = <0>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440gx", "ibm,emac4";
+                               interrupt-parent = <&UIC2>;
+                               interrupts = <0 4 1 4>;
+                               reg = <40000c00 70>;
+                               local-mac-address = [000000000000]; // Filled in by zImage
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <2>;
+                               mal-rx-channel = <2>;
+                               cell-index = <2>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rgmii";
+                               phy-map = <00000001>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <0>;
+                               zmii-device = <&ZMII0>;
+                               zmii-channel = <2>;
+                       };
+
+                       EMAC3: ethernet@40000e00 {
+                               linux,network-index = <1>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440gx", "ibm,emac4";
+                               interrupt-parent = <&UIC2>;
+                               interrupts = <2 4 3 4>;
+                               reg = <40000e00 70>;
+                               local-mac-address = [000000000000]; // Filled in by zImage
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <3>;
+                               mal-rx-channel = <3>;
+                               cell-index = <3>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rgmii";
+                               phy-map = <00000003>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <1>;
+                               zmii-device = <&ZMII0>;
+                               zmii-channel = <3>;
+                       };
+
+
+                       GPT0: gpt@40000a00 {
+                               /* FIXME */
+                               reg = <40000a00 d4>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <12 4 13 4 14 4 15 4 16 4>;
+                       };
+
+               };
+
+               PCIX0: pci@20ec00000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+                       primary;
+                       large-inbound-windows;
+                       enable-msi-hole;
+                       reg = <2 0ec00000   8   /* Config space access */
+                              0 0 0            /* no IACK cycles */
+                              2 0ed00000   4   /* Special cycles */
+                              2 0ec80000 100   /* Internal registers */
+                              2 0ec80100  fc>; /* Internal messaging registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 00000003 80000000 0 80000000
+                                 01000000 0 00000000 00000002 08000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+                       interrupt-map-mask = <f800 0 0 7>;
+                       interrupt-map = <
+                               /* IDSEL 1 */
+                               0800 0 0 1 &UIC0 17 8
+                               0800 0 0 2 &UIC0 18 8
+                               0800 0 0 3 &UIC0 19 8
+                               0800 0 0 4 &UIC0 1a 8
+
+                               /* IDSEL 2 */
+                               1000 0 0 1 &UIC0 18 8
+                               1000 0 0 2 &UIC0 19 8
+                               1000 0 0 3 &UIC0 1a 8
+                               1000 0 0 4 &UIC0 17 8
+                       >;
+               };
+       };
+
+       chosen {
+               linux,stdout-path = "/plb/opb/serial@40000300";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/tqm5200.dts powerpc.git/arch/powerpc/boot/dts/tqm5200.dts
--- linux-2.6.24/arch/powerpc/boot/dts/tqm5200.dts      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/tqm5200.dts       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,184 @@
+/*
+ * TQM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+       model = "tqc,tqm5200";
+       compatible = "tqc,tqm5200";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,5200@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <20>;
+                       i-cache-line-size = <20>;
+                       d-cache-size = <4000>;          // L1, 16K
+                       i-cache-size = <4000>;          // L1, 16K
+                       timebase-frequency = <0>;       // from bootloader
+                       bus-frequency = <0>;            // from bootloader
+                       clock-frequency = <0>;          // from bootloader
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <00000000 04000000>;      // 64MB
+       };
+
+       soc5200@f0000000 {
+               model = "fsl,mpc5200";
+               compatible = "fsl,mpc5200";
+               revision = "";                  // from bootloader
+               device_type = "soc";
+               ranges = <0 f0000000 0000c000>;
+               reg = <f0000000 00000100>;
+               bus-frequency = <0>;            // from bootloader
+               system-frequency = <0>;         // from bootloader
+
+               cdm@200 {
+                       compatible = "mpc5200-cdm";
+                       reg = <200 38>;
+               };
+
+               mpc5200_pic: pic@500 {
+                       // 5200 interrupts are encoded into two levels;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       compatible = "mpc5200-pic";
+                       reg = <500 80>;
+               };
+
+               gpt@600 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200-gpt";
+                       reg = <600 10>;
+                       interrupts = <1 9 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl,has-wdt;
+               };
+
+               gpio@b00 {
+                       compatible = "mpc5200-gpio";
+                       reg = <b00 40>;
+                       interrupts = <1 7 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               usb@1000 {
+                       compatible = "mpc5200-ohci","ohci-be";
+                       reg = <1000 ff>;
+                       interrupts = <2 6 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               dma-controller@1200 {
+                       compatible = "mpc5200-bestcomm";
+                       reg = <1200 80>;
+                       interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+                                     3 4 0  3 5 0  3 6 0  3 7 0
+                                     3 8 0  3 9 0  3 a 0  3 b 0
+                                     3 c 0  3 d 0  3 e 0  3 f 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               xlb@1f00 {
+                       compatible = "mpc5200-xlb";
+                       reg = <1f00 100>;
+               };
+
+               serial@2000 {           // PSC1
+                       device_type = "serial";
+                       compatible = "mpc5200-psc-uart";
+                       port-number = <0>;  // Logical port assignment
+                       reg = <2000 100>;
+                       interrupts = <2 1 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2200 {           // PSC2
+                       device_type = "serial";
+                       compatible = "mpc5200-psc-uart";
+                       port-number = <1>;  // Logical port assignment
+                       reg = <2200 100>;
+                       interrupts = <2 2 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2400 {           // PSC3
+                       device_type = "serial";
+                       compatible = "mpc5200-psc-uart";
+                       port-number = <2>;  // Logical port assignment
+                       reg = <2400 100>;
+                       interrupts = <2 3 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               ethernet@3000 {
+                       device_type = "network";
+                       compatible = "mpc5200-fec";
+                       reg = <3000 800>;
+                       local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+                       interrupts = <2 5 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               ata@3a00 {
+                       compatible = "mpc5200-ata";
+                       reg = <3a00 100>;
+                       interrupts = <2 7 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               i2c@3d40 {
+                       compatible = "mpc5200-i2c","fsl-i2c";
+                       reg = <3d40 40>;
+                       interrupts = <2 10 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl5200-clocking;
+               };
+
+               sram@8000 {
+                       compatible = "mpc5200-sram";
+                       reg = <8000 4000>;
+               };
+       };
+
+       pci@f0000d00 {
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               compatible = "fsl,mpc5200-pci";
+               reg = <f0000d00 100>;
+               interrupt-map-mask = <f800 0 0 7>;
+               interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
+                                c000 0 0 2 &mpc5200_pic 0 0 3
+                                c000 0 0 3 &mpc5200_pic 0 0 3
+                                c000 0 0 4 &mpc5200_pic 0 0 3>;
+               clock-frequency = <0>; // From boot loader
+               interrupts = <2 8 0 2 9 0 2 a 0>;
+               interrupt-parent = <&mpc5200_pic>;
+               bus-range = <0 0>;
+               ranges = <42000000 0 80000000 80000000 0 10000000
+                         02000000 0 90000000 90000000 0 10000000
+                         01000000 0 00000000 a0000000 0 01000000>;
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/walnut.dts powerpc.git/arch/powerpc/boot/dts/walnut.dts
--- linux-2.6.24/arch/powerpc/boot/dts/walnut.dts       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/walnut.dts        2008-01-28 20:25:49.000000000 +0100
@@ -14,14 +14,21 @@
        #size-cells = <1>;
        model = "ibm,walnut";
        compatible = "ibm,walnut";
-       dcr-parent = <&/cpus/PowerPC,405GP@0>;
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
 
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
 
-               PowerPC,405GP@0 {
+               cpu@0 {
                        device_type = "cpu";
+                       model = "PowerPC,405GP";
                        reg = <0>;
                        clock-frequency = <bebc200>; /* Filled in by zImage */
                        timebase-frequency = <0>; /* Filled in by zImage */
@@ -168,9 +175,10 @@
                                };
                        };
 
-                       ds1743@1,0 {
+                       nvram@1,0 {
                                /* NVRAM and RTC */
-                               compatible = "ds1743";
+                               compatible = "ds1743-nvram";
+                               #bytes = <2000>;
                                reg = <1 0 2000>;
                        };
 
@@ -190,6 +198,45 @@
                                virtual-reg = <f0300005>;
                        };
                };
+
+               PCI0: pci@ec000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
+                       primary;
+                       reg = <eec00000 8       /* Config space access */
+                              eed80000 4       /* IACK */
+                              eed80000 4       /* Special cycle */
+                              ef480000 40>;    /* Internal registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed. Chip supports a second
+                        * IO range but we don't use it for now
+                        */
+                       ranges = <02000000 0 80000000 80000000 0 20000000
+                                 01000000 0 00000000 e8000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* Walnut has all 4 IRQ pins tied together per slot */
+                       interrupt-map-mask = <f800 0 0 0>;
+                       interrupt-map = <
+                               /* IDSEL 1 */
+                               0800 0 0 0 &UIC0 1c 8
+
+                               /* IDSEL 2 */
+                               1000 0 0 0 &UIC0 1d 8
+
+                               /* IDSEL 3 */
+                               1800 0 0 0 &UIC0 1e 8
+
+                               /* IDSEL 4 */
+                               2000 0 0 0 &UIC0 1f 8
+                       >;
+               };
        };
 
        chosen {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/dts/warp.dts powerpc.git/arch/powerpc/boot/dts/warp.dts
--- linux-2.6.24/arch/powerpc/boot/dts/warp.dts 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/dts/warp.dts  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,239 @@
+/*
+ * Device Tree Source for PIKA Warp
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       model = "pika,warp";
+       compatible = "pika,warp";
+       dcr-parent = <&/cpus/cpu@0>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               serial0 = &UART0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       model = "PowerPC,440EP";
+                       reg = <0>;
+                       clock-frequency = <0>; /* Filled in by zImage */
+                       timebase-frequency = <0>; /* Filled in by zImage */
+                       i-cache-line-size = <20>;
+                       d-cache-line-size = <20>;
+                       i-cache-size = <8000>;
+                       d-cache-size = <8000>;
+                       dcr-controller;
+                       dcr-access-method = "native";
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0 0 0>; /* Filled in by zImage */
+       };
+
+       UIC0: interrupt-controller0 {
+               compatible = "ibm,uic-440ep","ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0c0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+       UIC1: interrupt-controller1 {
+               compatible = "ibm,uic-440ep","ibm,uic";
+               interrupt-controller;
+               cell-index = <1>;
+               dcr-reg = <0d0 009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <1e 4 1f 4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       SDR0: sdr {
+               compatible = "ibm,sdr-440ep";
+               dcr-reg = <00e 002>;
+       };
+
+       CPR0: cpr {
+               compatible = "ibm,cpr-440ep";
+               dcr-reg = <00c 002>;
+       };
+
+       plb {
+               compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <0>; /* Filled in by zImage */
+
+               SDRAM0: sdram {
+                       compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+                       dcr-reg = <010 2>;
+               };
+
+               DMA0: dma {
+                       compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+                       dcr-reg = <100 027>;
+               };
+
+               MAL0: mcmal {
+                       compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+                       dcr-reg = <180 62>;
+                       num-tx-chans = <4>;
+                       num-rx-chans = <2>;
+                       interrupt-parent = <&MAL0>;
+                       interrupts = <0 1 2 3 4>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+                                       /*RXEOB*/ 1 &UIC0 b 4
+                                       /*SERR*/  2 &UIC1 0 4
+                                       /*TXDE*/  3 &UIC1 1 4
+                                       /*RXDE*/  4 &UIC1 2 4>;
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <00000000 0 00000000 80000000
+                                 80000000 0 80000000 80000000>;
+                       interrupt-parent = <&UIC1>;
+                       interrupts = <7 4>;
+                       clock-frequency = <0>; /* Filled in by zImage */
+
+                       EBC0: ebc {
+                               compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+                               dcr-reg = <012 2>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               interrupts = <5 1>;
+                               interrupt-parent = <&UIC1>;
+
+                               fpga@2,0 {
+                                       compatible = "pika,fpga";
+                                       reg = <2 0 2200>;
+                                       interrupts = <18 8>;
+                                       interrupt-parent = <&UIC0>;
+                               };
+
+                               nor_flash@0,0 {
+                                       compatible = "amd,s29gl512n", "cfi-flash";
+                                       bank-width = <2>;
+                                       reg = <0 0 4000000>;
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       partition@0 {
+                                               label = "kernel";
+                                               reg = <0 180000>;
+                                       };
+                                       partition@180000 {
+                                               label = "root";
+                                               reg = <180000 3480000>;
+                                       };
+                                       partition@3600000 {
+                                               label = "user";
+                                               reg = <3600000 900000>;
+                                       };
+                                       partition@3f00000 {
+                                               label = "fpga";
+                                               reg = <3f00000 40000>;
+                                       };
+                                       partition@3f40000 {
+                                               label = "env";
+                                               reg = <3f40000 40000>;
+                                       };
+                                       partition@3f80000 {
+                                               label = "u-boot";
+                                               reg = <3f80000 80000>;
+                                       };
+                               };
+                       };
+
+                       UART0: serial@ef600300 {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <ef600300 8>;
+                               virtual-reg = <ef600300>;
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               current-speed = <1c200>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0 4>;
+                       };
+
+                       IIC0: i2c@ef600700 {
+                               compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+                               reg = <ef600700 14>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <2 4>;
+                       };
+
+                       GPIO0: gpio@ef600b00 {
+                               compatible = "ibm,gpio-440ep";
+                               reg = <ef600b00 48>;
+                       };
+
+                       GPIO1: gpio@ef600c00 {
+                               compatible = "ibm,gpio-440ep";
+                               reg = <ef600c00 48>;
+                       };
+
+                       ZMII0: emac-zmii@ef600d00 {
+                               compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+                               reg = <ef600d00 c>;
+                       };
+
+                       EMAC0: ethernet@ef600e00 {
+                               linux,network-index = <0>;
+                               device_type = "network";
+                               compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <1c 4 1d 4>;
+                               reg = <ef600e00 70>;
+                               local-mac-address = [000000000000];
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <0 1>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <5dc>;
+                               rx-fifo-size = <1000>;
+                               tx-fifo-size = <800>;
+                               phy-mode = "rmii";
+                               phy-map = <00000000>;
+                               zmii-device = <&ZMII0>;
+                               zmii-channel = <0>;
+                       };
+
+                       usb@ef601000 {
+                               compatible = "ohci-be";
+                               reg = <ef601000 80>;
+                               interrupts = <8 1 9 1>;
+                               interrupt-parent = < &UIC1 >;
+                       };
+               };
+       };
+
+       chosen {
+               linux,stdout-path = "/plb/opb/serial@ef600300";
+       };
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/ebony.c powerpc.git/arch/powerpc/boot/ebony.c
--- linux-2.6.24/arch/powerpc/boot/ebony.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/ebony.c       2008-01-28 20:25:49.000000000 +0100
@@ -31,66 +31,6 @@
 
 static u8 *ebony_mac0, *ebony_mac1;
 
-/* Calculate 440GP clocks */
-void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
-{
-       u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
-       u32 cr0 = mfdcr(DCRN_CPC0_CR0);
-       u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
-       u32 opdv = CPC0_SYS0_OPDV(sys0);
-       u32 epdv = CPC0_SYS0_EPDV(sys0);
-
-       if (sys0 & CPC0_SYS0_BYPASS) {
-               /* Bypass system PLL */
-               cpu = plb = sysclk;
-       } else {
-               if (sys0 & CPC0_SYS0_EXTSL)
-                       /* PerClk */
-                       m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
-               else
-                       /* CPU clock */
-                       m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
-               cpu = sysclk * m / CPC0_SYS0_FWDVA(sys0);
-               plb = sysclk * m / CPC0_SYS0_FWDVB(sys0);
-       }
-
-       opb = plb / opdv;
-       ebc = opb / epdv;
-
-       /* FIXME: Check if this is for all 440GP, or just Ebony */
-       if ((mfpvr() & 0xf0000fff) == 0x40000440)
-               /* Rev. B 440GP, use external system clock */
-               tb = sysclk;
-       else
-               /* Rev. C 440GP, errata force us to use internal clock */
-               tb = cpu;
-
-       if (cr0 & CPC0_CR0_U0EC)
-               /* External UART clock */
-               uart0 = ser_clk;
-       else
-               /* Internal UART clock */
-               uart0 = plb / CPC0_CR0_UDIV(cr0);
-
-       if (cr0 & CPC0_CR0_U1EC)
-               /* External UART clock */
-               uart1 = ser_clk;
-       else
-               /* Internal UART clock */
-               uart1 = plb / CPC0_CR0_UDIV(cr0);
-
-       printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
-              (sysclk + 500000) / 1000000, sysclk);
-
-       dt_fixup_cpu_clocks(cpu, tb, 0);
-
-       dt_fixup_clock("/plb", plb);
-       dt_fixup_clock("/plb/opb", opb);
-       dt_fixup_clock("/plb/opb/ebc", ebc);
-       dt_fixup_clock("/plb/opb/serial@40000200", uart0);
-       dt_fixup_clock("/plb/opb/serial@40000300", uart1);
-}
-
 #define EBONY_FPGA_PATH                "/plb/opb/ebc/fpga"
 #define        EBONY_FPGA_FLASH_SEL    0x01
 #define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash"
@@ -134,7 +74,7 @@
        unsigned long sysclk = 33000000;
 
        ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
-       ibm4xx_fixup_memsize();
+       ibm4xx_sdram_fixup_memsize();
        dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
        ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
        ebony_flashsel_fixup();
@@ -146,6 +86,6 @@
        platform_ops.exit = ibm44x_dbcr_reset;
        ebony_mac0 = mac0;
        ebony_mac1 = mac1;
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/ep405.c powerpc.git/arch/powerpc/boot/ep405.c
--- linux-2.6.24/arch/powerpc/boot/ep405.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/ep405.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,74 @@
+/*
+ * Embedded Planet EP405 with PlanetCore firmware
+ *
+ * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\
+ *
+ * Based on ep88xc.c by
+ *
+ * Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "planetcore.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "io.h"
+
+static char *table;
+static u64 mem_size;
+
+static void platform_fixups(void)
+{
+       u64 val;
+       void *nvrtc;
+
+       dt_fixup_memory(0, mem_size);
+       planetcore_set_mac_addrs(table);
+
+       if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) {
+               printf("No PlanetCore crystal frequency key.\r\n");
+               return;
+       }
+       ibm405gp_fixup_clocks(val, 0xa8c000);
+       ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
+       ibm4xx_fixup_ebc_ranges("/plb/ebc");
+
+       if (!planetcore_get_decimal(table, PLANETCORE_KEY_KB_NVRAM, &val)) {
+               printf("No PlanetCore NVRAM size key.\r\n");
+               return;
+       }
+       nvrtc = finddevice("/plb/ebc/nvrtc@4,200000");
+       if (nvrtc != NULL) {
+               u32 reg[3] = { 4, 0x200000, 0};
+               getprop(nvrtc, "reg", reg, 3);
+               reg[2] = (val << 10) & 0xffffffff;
+               setprop(nvrtc, "reg", reg, 3);
+       }
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                  unsigned long r6, unsigned long r7)
+{
+       table = (char *)r3;
+       planetcore_prepare_table(table);
+
+       if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size))
+               return;
+
+       mem_size *= 1024 * 1024;
+       simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
+
+       fdt_init(_dtb_start);
+
+       planetcore_set_stdout_path(table);
+
+       serial_console_init();
+       platform_ops.fixups = platform_fixups;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/ep8248e.c powerpc.git/arch/powerpc/boot/ep8248e.c
--- linux-2.6.24/arch/powerpc/boot/ep8248e.c    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/ep8248e.c     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,55 @@
+/*
+ * Embedded Planet EP8248E with PlanetCore firmware
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "planetcore.h"
+#include "pq2.h"
+
+static char *table;
+static u64 mem_size;
+
+#include <io.h>
+
+static void platform_fixups(void)
+{
+       u64 val;
+
+       dt_fixup_memory(0, mem_size);
+       planetcore_set_mac_addrs(table);
+
+       if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) {
+               printf("No PlanetCore crystal frequency key.\r\n");
+               return;
+       }
+
+       pq2_fixup_clocks(val);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+       table = (char *)r3;
+       planetcore_prepare_table(table);
+
+       if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size))
+               return;
+
+       mem_size *= 1024 * 1024;
+       simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
+
+       fdt_init(_dtb_start);
+
+       planetcore_set_stdout_path(table);
+       serial_console_init();
+       platform_ops.fixups = platform_fixups;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/ep88xc.c powerpc.git/arch/powerpc/boot/ep88xc.c
--- linux-2.6.24/arch/powerpc/boot/ep88xc.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/ep88xc.c      2008-01-28 20:25:49.000000000 +0100
@@ -45,7 +45,7 @@
        mem_size *= 1024 * 1024;
        simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
 
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
 
        planetcore_set_stdout_path(table);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/flatdevtree.c powerpc.git/arch/powerpc/boot/flatdevtree.c
--- linux-2.6.24/arch/powerpc/boot/flatdevtree.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/flatdevtree.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,1036 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright Pantelis Antoniou 2006
- * Copyright (C) IBM Corporation 2006
- *
- * Authors: Pantelis Antoniou <pantelis@embeddedalley.com>
- *         Hollis Blanchard <hollisb@us.ibm.com>
- *         Mark A. Greer <mgreer@mvista.com>
- *         Paul Mackerras <paulus@samba.org>
- */
-
-#include <string.h>
-#include <stddef.h>
-#include "flatdevtree.h"
-#include "flatdevtree_env.h"
-
-#define _ALIGN(x, al)  (((x) + (al) - 1) & ~((al) - 1))
-
-static char *ft_root_node(struct ft_cxt *cxt)
-{
-       return cxt->rgn[FT_STRUCT].start;
-}
-
-/* Routines for keeping node ptrs returned by ft_find_device current */
-/* First entry not used b/c it would return 0 and be taken as NULL/error */
-static void *ft_get_phandle(struct ft_cxt *cxt, char *node)
-{
-       unsigned int i;
-
-       if (!node)
-               return NULL;
-
-       for (i = 1; i < cxt->nodes_used; i++)   /* already there? */
-               if (cxt->node_tbl[i] == node)
-                       return (void *)i;
-
-       if (cxt->nodes_used < cxt->node_max) {
-               cxt->node_tbl[cxt->nodes_used] = node;
-               return (void *)cxt->nodes_used++;
-       }
-
-       return NULL;
-}
-
-static char *ft_node_ph2node(struct ft_cxt *cxt, const void *phandle)
-{
-       unsigned int i = (unsigned int)phandle;
-
-       if (i < cxt->nodes_used)
-               return cxt->node_tbl[i];
-       return NULL;
-}
-
-static void ft_node_update_before(struct ft_cxt *cxt, char *addr, int shift)
-{
-       unsigned int i;
-
-       if (shift == 0)
-               return;
-
-       for (i = 1; i < cxt->nodes_used; i++)
-               if (cxt->node_tbl[i] < addr)
-                       cxt->node_tbl[i] += shift;
-}
-
-static void ft_node_update_after(struct ft_cxt *cxt, char *addr, int shift)
-{
-       unsigned int i;
-
-       if (shift == 0)
-               return;
-
-       for (i = 1; i < cxt->nodes_used; i++)
-               if (cxt->node_tbl[i] >= addr)
-                       cxt->node_tbl[i] += shift;
-}
-
-/* Struct used to return info from ft_next() */
-struct ft_atom {
-       u32 tag;
-       const char *name;
-       void *data;
-       u32 size;
-};
-
-/* Set ptrs to current one's info; return addr of next one */
-static char *ft_next(struct ft_cxt *cxt, char *p, struct ft_atom *ret)
-{
-       u32 sz;
-
-       if (p >= cxt->rgn[FT_STRUCT].start + cxt->rgn[FT_STRUCT].size)
-               return NULL;
-
-       ret->tag = be32_to_cpu(*(u32 *) p);
-       p += 4;
-
-       switch (ret->tag) {     /* Tag */
-       case OF_DT_BEGIN_NODE:
-               ret->name = p;
-               ret->data = (void *)(p - 4);    /* start of node */
-               p += _ALIGN(strlen(p) + 1, 4);
-               break;
-       case OF_DT_PROP:
-               ret->size = sz = be32_to_cpu(*(u32 *) p);
-               ret->name = cxt->str_anchor + be32_to_cpu(*(u32 *) (p + 4));
-               ret->data = (void *)(p + 8);
-               p += 8 + _ALIGN(sz, 4);
-               break;
-       case OF_DT_END_NODE:
-       case OF_DT_NOP:
-               break;
-       case OF_DT_END:
-       default:
-               p = NULL;
-               break;
-       }
-
-       return p;
-}
-
-#define HDR_SIZE       _ALIGN(sizeof(struct boot_param_header), 8)
-#define EXPAND_INCR    1024    /* alloc this much extra when expanding */
-
-/* Copy the tree to a newly-allocated region and put things in order */
-static int ft_reorder(struct ft_cxt *cxt, int nextra)
-{
-       unsigned long tot;
-       enum ft_rgn_id r;
-       char *p, *pend;
-       int stroff;
-
-       tot = HDR_SIZE + EXPAND_INCR;
-       for (r = FT_RSVMAP; r <= FT_STRINGS; ++r)
-               tot += cxt->rgn[r].size;
-       if (nextra > 0)
-               tot += nextra;
-       tot = _ALIGN(tot, 8);
-
-       if (!cxt->realloc)
-               return 0;
-       p = cxt->realloc(NULL, tot);
-       if (!p)
-               return 0;
-
-       memcpy(p, cxt->bph, sizeof(struct boot_param_header));
-       /* offsets get fixed up later */
-
-       cxt->bph = (struct boot_param_header *)p;
-       cxt->max_size = tot;
-       pend = p + tot;
-       p += HDR_SIZE;
-
-       memcpy(p, cxt->rgn[FT_RSVMAP].start, cxt->rgn[FT_RSVMAP].size);
-       cxt->rgn[FT_RSVMAP].start = p;
-       p += cxt->rgn[FT_RSVMAP].size;
-
-       memcpy(p, cxt->rgn[FT_STRUCT].start, cxt->rgn[FT_STRUCT].size);
-       ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start,
-                       p - cxt->rgn[FT_STRUCT].start);
-       cxt->p += p - cxt->rgn[FT_STRUCT].start;
-       cxt->rgn[FT_STRUCT].start = p;
-
-       p = pend - cxt->rgn[FT_STRINGS].size;
-       memcpy(p, cxt->rgn[FT_STRINGS].start, cxt->rgn[FT_STRINGS].size);
-       stroff = cxt->str_anchor - cxt->rgn[FT_STRINGS].start;
-       cxt->rgn[FT_STRINGS].start = p;
-       cxt->str_anchor = p + stroff;
-
-       cxt->isordered = 1;
-       return 1;
-}
-
-static inline char *prev_end(struct ft_cxt *cxt, enum ft_rgn_id r)
-{
-       if (r > FT_RSVMAP)
-               return cxt->rgn[r - 1].start + cxt->rgn[r - 1].size;
-       return (char *)cxt->bph + HDR_SIZE;
-}
-
-static inline char *next_start(struct ft_cxt *cxt, enum ft_rgn_id r)
-{
-       if (r < FT_STRINGS)
-               return cxt->rgn[r + 1].start;
-       return (char *)cxt->bph + cxt->max_size;
-}
-
-/*
- * See if we can expand region rgn by nextra bytes by using up
- * free space after or before the region.
- */
-static int ft_shuffle(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn,
-               int nextra)
-{
-       char *p = *pp;
-       char *rgn_start, *rgn_end;
-
-       rgn_start = cxt->rgn[rgn].start;
-       rgn_end = rgn_start + cxt->rgn[rgn].size;
-       if (nextra <= 0 || rgn_end + nextra <= next_start(cxt, rgn)) {
-               /* move following stuff */
-               if (p < rgn_end) {
-                       if (nextra < 0)
-                               memmove(p, p - nextra, rgn_end - p + nextra);
-                       else
-                               memmove(p + nextra, p, rgn_end - p);
-                       if (rgn == FT_STRUCT)
-                               ft_node_update_after(cxt, p, nextra);
-               }
-               cxt->rgn[rgn].size += nextra;
-               if (rgn == FT_STRINGS)
-                       /* assumes strings only added at beginning */
-                       cxt->str_anchor += nextra;
-               return 1;
-       }
-       if (prev_end(cxt, rgn) <= rgn_start - nextra) {
-               /* move preceding stuff */
-               if (p > rgn_start) {
-                       memmove(rgn_start - nextra, rgn_start, p - rgn_start);
-                       if (rgn == FT_STRUCT)
-                               ft_node_update_before(cxt, p, -nextra);
-               }
-               *pp -= nextra;
-               cxt->rgn[rgn].start -= nextra;
-               cxt->rgn[rgn].size += nextra;
-               return 1;
-       }
-       return 0;
-}
-
-static int ft_make_space(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn,
-                        int nextra)
-{
-       unsigned long size, ssize, tot;
-       char *str, *next;
-       enum ft_rgn_id r;
-
-       if (!cxt->isordered) {
-               unsigned long rgn_off = *pp - cxt->rgn[rgn].start;
-
-               if (!ft_reorder(cxt, nextra))
-                       return 0;
-
-               *pp = cxt->rgn[rgn].start + rgn_off;
-       }
-       if (ft_shuffle(cxt, pp, rgn, nextra))
-               return 1;
-
-       /* See if there is space after the strings section */
-       ssize = cxt->rgn[FT_STRINGS].size;
-       if (cxt->rgn[FT_STRINGS].start + ssize
-                       < (char *)cxt->bph + cxt->max_size) {
-               /* move strings up as far as possible */
-               str = (char *)cxt->bph + cxt->max_size - ssize;
-               cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start;
-               memmove(str, cxt->rgn[FT_STRINGS].start, ssize);
-               cxt->rgn[FT_STRINGS].start = str;
-               /* enough space now? */
-               if (rgn >= FT_STRUCT && ft_shuffle(cxt, pp, rgn, nextra))
-                       return 1;
-       }
-
-       /* how much total free space is there following this region? */
-       tot = 0;
-       for (r = rgn; r < FT_STRINGS; ++r) {
-               char *r_end = cxt->rgn[r].start + cxt->rgn[r].size;
-               tot += next_start(cxt, rgn) - r_end;
-       }
-
-       /* cast is to shut gcc up; we know nextra >= 0 */
-       if (tot < (unsigned int)nextra) {
-               /* have to reallocate */
-               char *newp, *new_start;
-               int shift;
-
-               if (!cxt->realloc)
-                       return 0;
-               size = _ALIGN(cxt->max_size + (nextra - tot) + EXPAND_INCR, 8);
-               newp = cxt->realloc(cxt->bph, size);
-               if (!newp)
-                       return 0;
-               cxt->max_size = size;
-               shift = newp - (char *)cxt->bph;
-
-               if (shift) { /* realloc can return same addr */
-                       cxt->bph = (struct boot_param_header *)newp;
-                       ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start,
-                                       shift);
-                       for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) {
-                               new_start = cxt->rgn[r].start + shift;
-                               cxt->rgn[r].start = new_start;
-                       }
-                       *pp += shift;
-                       cxt->str_anchor += shift;
-               }
-
-               /* move strings up to the end */
-               str = newp + size - ssize;
-               cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start;
-               memmove(str, cxt->rgn[FT_STRINGS].start, ssize);
-               cxt->rgn[FT_STRINGS].start = str;
-
-               if (ft_shuffle(cxt, pp, rgn, nextra))
-                       return 1;
-       }
-
-       /* must be FT_RSVMAP and we need to move FT_STRUCT up */
-       if (rgn == FT_RSVMAP) {
-               next = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size
-                       + nextra;
-               ssize = cxt->rgn[FT_STRUCT].size;
-               if (next + ssize >= cxt->rgn[FT_STRINGS].start)
-                       return 0;       /* "can't happen" */
-               memmove(next, cxt->rgn[FT_STRUCT].start, ssize);
-               ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, nextra);
-               cxt->rgn[FT_STRUCT].start = next;
-
-               if (ft_shuffle(cxt, pp, rgn, nextra))
-                       return 1;
-       }
-
-       return 0;               /* "can't happen" */
-}
-
-static void ft_put_word(struct ft_cxt *cxt, u32 v)
-{
-       *(u32 *) cxt->p = cpu_to_be32(v);
-       cxt->p += 4;
-}
-
-static void ft_put_bin(struct ft_cxt *cxt, const void *data, unsigned int sz)
-{
-       unsigned long sza = _ALIGN(sz, 4);
-
-       /* zero out the alignment gap if necessary */
-       if (sz < sza)
-               *(u32 *) (cxt->p + sza - 4) = 0;
-
-       /* copy in the data */
-       memcpy(cxt->p, data, sz);
-
-       cxt->p += sza;
-}
-
-char *ft_begin_node(struct ft_cxt *cxt, const char *name)
-{
-       unsigned long nlen = strlen(name) + 1;
-       unsigned long len = 8 + _ALIGN(nlen, 4);
-       char *ret;
-
-       if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len))
-               return NULL;
-
-       ret = cxt->p;
-
-       ft_put_word(cxt, OF_DT_BEGIN_NODE);
-       ft_put_bin(cxt, name, strlen(name) + 1);
-
-       return ret;
-}
-
-void ft_end_node(struct ft_cxt *cxt)
-{
-       ft_put_word(cxt, OF_DT_END_NODE);
-}
-
-void ft_nop(struct ft_cxt *cxt)
-{
-       if (ft_make_space(cxt, &cxt->p, FT_STRUCT, 4))
-               ft_put_word(cxt, OF_DT_NOP);
-}
-
-#define NO_STRING      0x7fffffff
-
-static int lookup_string(struct ft_cxt *cxt, const char *name)
-{
-       char *p, *end;
-
-       p = cxt->rgn[FT_STRINGS].start;
-       end = p + cxt->rgn[FT_STRINGS].size;
-       while (p < end) {
-               if (strcmp(p, (char *)name) == 0)
-                       return p - cxt->str_anchor;
-               p += strlen(p) + 1;
-       }
-
-       return NO_STRING;
-}
-
-/* lookup string and insert if not found */
-static int map_string(struct ft_cxt *cxt, const char *name)
-{
-       int off;
-       char *p;
-
-       off = lookup_string(cxt, name);
-       if (off != NO_STRING)
-               return off;
-       p = cxt->rgn[FT_STRINGS].start;
-       if (!ft_make_space(cxt, &p, FT_STRINGS, strlen(name) + 1))
-               return NO_STRING;
-       strcpy(p, name);
-       return p - cxt->str_anchor;
-}
-
-int ft_prop(struct ft_cxt *cxt, const char *name, const void *data,
-               unsigned int sz)
-{
-       int off, len;
-
-       off = map_string(cxt, name);
-       if (off == NO_STRING)
-               return -1;
-
-       len = 12 + _ALIGN(sz, 4);
-       if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len))
-               return -1;
-
-       ft_put_word(cxt, OF_DT_PROP);
-       ft_put_word(cxt, sz);
-       ft_put_word(cxt, off);
-       ft_put_bin(cxt, data, sz);
-       return 0;
-}
-
-int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str)
-{
-       return ft_prop(cxt, name, str, strlen(str) + 1);
-}
-
-int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val)
-{
-       u32 v = cpu_to_be32((u32) val);
-
-       return ft_prop(cxt, name, &v, 4);
-}
-
-/* Calculate the size of the reserved map */
-static unsigned long rsvmap_size(struct ft_cxt *cxt)
-{
-       struct ft_reserve *res;
-
-       res = (struct ft_reserve *)cxt->rgn[FT_RSVMAP].start;
-       while (res->start || res->len)
-               ++res;
-       return (char *)(res + 1) - cxt->rgn[FT_RSVMAP].start;
-}
-
-/* Calculate the size of the struct region by stepping through it */
-static unsigned long struct_size(struct ft_cxt *cxt)
-{
-       char *p = cxt->rgn[FT_STRUCT].start;
-       char *next;
-       struct ft_atom atom;
-
-       /* make check in ft_next happy */
-       if (cxt->rgn[FT_STRUCT].size == 0)
-               cxt->rgn[FT_STRUCT].size = 0xfffffffful - (unsigned long)p;
-
-       while ((next = ft_next(cxt, p, &atom)) != NULL)
-               p = next;
-       return p + 4 - cxt->rgn[FT_STRUCT].start;
-}
-
-/* add `adj' on to all string offset values in the struct area */
-static void adjust_string_offsets(struct ft_cxt *cxt, int adj)
-{
-       char *p = cxt->rgn[FT_STRUCT].start;
-       char *next;
-       struct ft_atom atom;
-       int off;
-
-       while ((next = ft_next(cxt, p, &atom)) != NULL) {
-               if (atom.tag == OF_DT_PROP) {
-                       off = be32_to_cpu(*(u32 *) (p + 8));
-                       *(u32 *) (p + 8) = cpu_to_be32(off + adj);
-               }
-               p = next;
-       }
-}
-
-/* start construction of the flat OF tree from scratch */
-void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size,
-               void *(*realloc_fn) (void *, unsigned long))
-{
-       struct boot_param_header *bph = blob;
-       char *p;
-       struct ft_reserve *pres;
-
-       /* clear the cxt */
-       memset(cxt, 0, sizeof(*cxt));
-
-       cxt->bph = bph;
-       cxt->max_size = max_size;
-       cxt->realloc = realloc_fn;
-       cxt->isordered = 1;
-
-       /* zero everything in the header area */
-       memset(bph, 0, sizeof(*bph));
-
-       bph->magic = cpu_to_be32(OF_DT_HEADER);
-       bph->version = cpu_to_be32(0x10);
-       bph->last_comp_version = cpu_to_be32(0x10);
-
-       /* start pointers */
-       cxt->rgn[FT_RSVMAP].start = p = blob + HDR_SIZE;
-       cxt->rgn[FT_RSVMAP].size = sizeof(struct ft_reserve);
-       pres = (struct ft_reserve *)p;
-       cxt->rgn[FT_STRUCT].start = p += sizeof(struct ft_reserve);
-       cxt->rgn[FT_STRUCT].size = 4;
-       cxt->rgn[FT_STRINGS].start = blob + max_size;
-       cxt->rgn[FT_STRINGS].size = 0;
-
-       /* init rsvmap and struct */
-       pres->start = 0;
-       pres->len = 0;
-       *(u32 *) p = cpu_to_be32(OF_DT_END);
-
-       cxt->str_anchor = blob;
-}
-
-/* open up an existing blob to be examined or modified */
-int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size,
-               unsigned int max_find_device,
-               void *(*realloc_fn) (void *, unsigned long))
-{
-       struct boot_param_header *bph = blob;
-
-       /* can't cope with version < 16 */
-       if (be32_to_cpu(bph->version) < 16)
-               return -1;
-
-       /* clear the cxt */
-       memset(cxt, 0, sizeof(*cxt));
-
-       /* alloc node_tbl to track node ptrs returned by ft_find_device */
-       ++max_find_device;
-       cxt->node_tbl = realloc_fn(NULL, max_find_device * sizeof(char *));
-       if (!cxt->node_tbl)
-               return -1;
-       memset(cxt->node_tbl, 0, max_find_device * sizeof(char *));
-       cxt->node_max = max_find_device;
-       cxt->nodes_used = 1;    /* don't use idx 0 b/c looks like NULL */
-
-       cxt->bph = bph;
-       cxt->max_size = max_size;
-       cxt->realloc = realloc_fn;
-
-       cxt->rgn[FT_RSVMAP].start = blob + be32_to_cpu(bph->off_mem_rsvmap);
-       cxt->rgn[FT_RSVMAP].size = rsvmap_size(cxt);
-       cxt->rgn[FT_STRUCT].start = blob + be32_to_cpu(bph->off_dt_struct);
-       cxt->rgn[FT_STRUCT].size = struct_size(cxt);
-       cxt->rgn[FT_STRINGS].start = blob + be32_to_cpu(bph->off_dt_strings);
-       cxt->rgn[FT_STRINGS].size = be32_to_cpu(bph->dt_strings_size);
-
-       cxt->p = cxt->rgn[FT_STRUCT].start;
-       cxt->str_anchor = cxt->rgn[FT_STRINGS].start;
-
-       return 0;
-}
-
-/* add a reserver physical area to the rsvmap */
-int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size)
-{
-       char *p;
-       struct ft_reserve *pres;
-
-       p = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size
-               - sizeof(struct ft_reserve);
-       if (!ft_make_space(cxt, &p, FT_RSVMAP, sizeof(struct ft_reserve)))
-               return -1;
-
-       pres = (struct ft_reserve *)p;
-       pres->start = cpu_to_be64(physaddr);
-       pres->len = cpu_to_be64(size);
-
-       return 0;
-}
-
-void ft_begin_tree(struct ft_cxt *cxt)
-{
-       cxt->p = ft_root_node(cxt);
-}
-
-void ft_end_tree(struct ft_cxt *cxt)
-{
-       struct boot_param_header *bph = cxt->bph;
-       char *p, *oldstr, *str, *endp;
-       unsigned long ssize;
-       int adj;
-
-       if (!cxt->isordered)
-               return;         /* we haven't touched anything */
-
-       /* adjust string offsets */
-       oldstr = cxt->rgn[FT_STRINGS].start;
-       adj = cxt->str_anchor - oldstr;
-       if (adj)
-               adjust_string_offsets(cxt, adj);
-
-       /* make strings end on 8-byte boundary */
-       ssize = cxt->rgn[FT_STRINGS].size;
-       endp = (char *)_ALIGN((unsigned long)cxt->rgn[FT_STRUCT].start
-                       + cxt->rgn[FT_STRUCT].size + ssize, 8);
-       str = endp - ssize;
-
-       /* move strings down to end of structs */
-       memmove(str, oldstr, ssize);
-       cxt->str_anchor = str;
-       cxt->rgn[FT_STRINGS].start = str;
-
-       /* fill in header fields */
-       p = (char *)bph;
-       bph->totalsize = cpu_to_be32(endp - p);
-       bph->off_mem_rsvmap = cpu_to_be32(cxt->rgn[FT_RSVMAP].start - p);
-       bph->off_dt_struct = cpu_to_be32(cxt->rgn[FT_STRUCT].start - p);
-       bph->off_dt_strings = cpu_to_be32(cxt->rgn[FT_STRINGS].start - p);
-       bph->dt_strings_size = cpu_to_be32(ssize);
-}
-
-void *ft_find_device(struct ft_cxt *cxt, const void *top, const char *srch_path)
-{
-       char *node;
-
-       if (top) {
-               node = ft_node_ph2node(cxt, top);
-               if (node == NULL)
-                       return NULL;
-       } else {
-               node = ft_root_node(cxt);
-       }
-
-       node = ft_find_descendent(cxt, node, srch_path);
-       return ft_get_phandle(cxt, node);
-}
-
-void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path)
-{
-       struct ft_atom atom;
-       char *p;
-       const char *cp, *q;
-       int cl;
-       int depth = -1;
-       int dmatch = 0;
-       const char *path_comp[FT_MAX_DEPTH];
-
-       cp = srch_path;
-       cl = 0;
-       p = top;
-
-       while ((p = ft_next(cxt, p, &atom)) != NULL) {
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE:
-                       ++depth;
-                       if (depth != dmatch)
-                               break;
-                       cxt->genealogy[depth] = atom.data;
-                       cxt->genealogy[depth + 1] = NULL;
-                       if (depth && !(strncmp(atom.name, cp, cl) == 0
-                                       && (atom.name[cl] == '/'
-                                               || atom.name[cl] == '\0'
-                                               || atom.name[cl] == '@')))
-                               break;
-                       path_comp[dmatch] = cp;
-                       /* it matches so far, advance to next path component */
-                       cp += cl;
-                       /* skip slashes */
-                       while (*cp == '/')
-                               ++cp;
-                       /* we're done if this is the end of the string */
-                       if (*cp == 0)
-                               return atom.data;
-                       /* look for end of this component */
-                       q = strchr(cp, '/');
-                       if (q)
-                               cl = q - cp;
-                       else
-                               cl = strlen(cp);
-                       ++dmatch;
-                       break;
-               case OF_DT_END_NODE:
-                       if (depth == 0)
-                               return NULL;
-                       if (dmatch > depth) {
-                               --dmatch;
-                               cl = cp - path_comp[dmatch] - 1;
-                               cp = path_comp[dmatch];
-                               while (cl > 0 && cp[cl - 1] == '/')
-                                       --cl;
-                       }
-                       --depth;
-                       break;
-               }
-       }
-       return NULL;
-}
-
-void *__ft_get_parent(struct ft_cxt *cxt, void *node)
-{
-       int d;
-       struct ft_atom atom;
-       char *p;
-
-       for (d = 0; cxt->genealogy[d] != NULL; ++d)
-               if (cxt->genealogy[d] == node)
-                       return d > 0 ? cxt->genealogy[d - 1] : NULL;
-
-       /* have to do it the hard way... */
-       p = ft_root_node(cxt);
-       d = 0;
-       while ((p = ft_next(cxt, p, &atom)) != NULL) {
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE:
-                       cxt->genealogy[d] = atom.data;
-                       if (node == atom.data) {
-                               /* found it */
-                               cxt->genealogy[d + 1] = NULL;
-                               return d > 0 ? cxt->genealogy[d - 1] : NULL;
-                       }
-                       ++d;
-                       break;
-               case OF_DT_END_NODE:
-                       --d;
-                       break;
-               }
-       }
-       return NULL;
-}
-
-void *ft_get_parent(struct ft_cxt *cxt, const void *phandle)
-{
-       void *node = ft_node_ph2node(cxt, phandle);
-       if (node == NULL)
-               return NULL;
-
-       node = __ft_get_parent(cxt, node);
-       return ft_get_phandle(cxt, node);
-}
-
-static const void *__ft_get_prop(struct ft_cxt *cxt, void *node,
-                                 const char *propname, unsigned int *len)
-{
-       struct ft_atom atom;
-       int depth = 0;
-
-       while ((node = ft_next(cxt, node, &atom)) != NULL) {
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE:
-                       ++depth;
-                       break;
-
-               case OF_DT_PROP:
-                       if (depth != 1 || strcmp(atom.name, propname))
-                               break;
-
-                       if (len)
-                               *len = atom.size;
-
-                       return atom.data;
-
-               case OF_DT_END_NODE:
-                       if (--depth <= 0)
-                               return NULL;
-               }
-       }
-
-       return NULL;
-}
-
-int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
-               void *buf, const unsigned int buflen)
-{
-       const void *data;
-       unsigned int size;
-
-       void *node = ft_node_ph2node(cxt, phandle);
-       if (!node)
-               return -1;
-
-       data = __ft_get_prop(cxt, node, propname, &size);
-       if (data) {
-               unsigned int clipped_size = min(size, buflen);
-               memcpy(buf, data, clipped_size);
-               return size;
-       }
-
-       return -1;
-}
-
-void *__ft_find_node_by_prop_value(struct ft_cxt *cxt, void *prev,
-                                   const char *propname, const char *propval,
-                                   unsigned int proplen)
-{
-       struct ft_atom atom;
-       char *p = ft_root_node(cxt);
-       char *next;
-       int past_prev = prev ? 0 : 1;
-       int depth = -1;
-
-       while ((next = ft_next(cxt, p, &atom)) != NULL) {
-               const void *data;
-               unsigned int size;
-
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE:
-                       depth++;
-
-                       if (prev == p) {
-                               past_prev = 1;
-                               break;
-                       }
-
-                       if (!past_prev || depth < 1)
-                               break;
-
-                       data = __ft_get_prop(cxt, p, propname, &size);
-                       if (!data || size != proplen)
-                               break;
-                       if (memcmp(data, propval, size))
-                               break;
-
-                       return p;
-
-               case OF_DT_END_NODE:
-                       if (depth-- == 0)
-                               return NULL;
-
-                       break;
-               }
-
-               p = next;
-       }
-
-       return NULL;
-}
-
-void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev,
-                                 const char *propname, const char *propval,
-                                 int proplen)
-{
-       void *node = NULL;
-
-       if (prev) {
-               node = ft_node_ph2node(cxt, prev);
-
-               if (!node)
-                       return NULL;
-       }
-
-       node = __ft_find_node_by_prop_value(cxt, node, propname,
-                                           propval, proplen);
-       return ft_get_phandle(cxt, node);
-}
-
-int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
-               const void *buf, const unsigned int buflen)
-{
-       struct ft_atom atom;
-       void *node;
-       char *p, *next;
-       int nextra;
-
-       node = ft_node_ph2node(cxt, phandle);
-       if (node == NULL)
-               return -1;
-
-       next = ft_next(cxt, node, &atom);
-       if (atom.tag != OF_DT_BEGIN_NODE)
-               /* phandle didn't point to a node */
-               return -1;
-       p = next;
-
-       while ((next = ft_next(cxt, p, &atom)) != NULL) {
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE: /* properties must go before subnodes */
-               case OF_DT_END_NODE:
-                       /* haven't found the property, insert here */
-                       cxt->p = p;
-                       return ft_prop(cxt, propname, buf, buflen);
-               case OF_DT_PROP:
-                       if (strcmp(atom.name, propname))
-                               break;
-                       /* found an existing property, overwrite it */
-                       nextra = _ALIGN(buflen, 4) - _ALIGN(atom.size, 4);
-                       cxt->p = atom.data;
-                       if (nextra && !ft_make_space(cxt, &cxt->p, FT_STRUCT,
-                                               nextra))
-                               return -1;
-                       *(u32 *) (cxt->p - 8) = cpu_to_be32(buflen);
-                       ft_put_bin(cxt, buf, buflen);
-                       return 0;
-               }
-               p = next;
-       }
-       return -1;
-}
-
-int ft_del_prop(struct ft_cxt *cxt, const void *phandle, const char *propname)
-{
-       struct ft_atom atom;
-       void *node;
-       char *p, *next;
-       int size;
-
-       node = ft_node_ph2node(cxt, phandle);
-       if (node == NULL)
-               return -1;
-
-       p = node;
-       while ((next = ft_next(cxt, p, &atom)) != NULL) {
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE:
-               case OF_DT_END_NODE:
-                       return -1;
-               case OF_DT_PROP:
-                       if (strcmp(atom.name, propname))
-                               break;
-                       /* found the property, remove it */
-                       size = 12 + -_ALIGN(atom.size, 4);
-                       cxt->p = p;
-                       if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, -size))
-                               return -1;
-                       return 0;
-               }
-               p = next;
-       }
-       return -1;
-}
-
-void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name)
-{
-       struct ft_atom atom;
-       char *p, *next, *ret;
-       int depth = 0;
-
-       if (parent) {
-               p = ft_node_ph2node(cxt, parent);
-               if (!p)
-                       return NULL;
-       } else {
-               p = ft_root_node(cxt);
-       }
-
-       while ((next = ft_next(cxt, p, &atom)) != NULL) {
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE:
-                       ++depth;
-                       if (depth == 1 && strcmp(atom.name, name) == 0)
-                               /* duplicate node name, return error */
-                               return NULL;
-                       break;
-               case OF_DT_END_NODE:
-                       --depth;
-                       if (depth > 0)
-                               break;
-                       /* end of node, insert here */
-                       cxt->p = p;
-                       ret = ft_begin_node(cxt, name);
-                       ft_end_node(cxt);
-                       return ft_get_phandle(cxt, ret);
-               }
-               p = next;
-       }
-       return NULL;
-}
-
-/* Returns the start of the path within the provided buffer, or NULL on
- * error.
- */
-char *ft_get_path(struct ft_cxt *cxt, const void *phandle,
-                  char *buf, int len)
-{
-       const char *path_comp[FT_MAX_DEPTH];
-       struct ft_atom atom;
-       char *p, *next, *pos;
-       int depth = 0, i;
-       void *node;
-
-       node = ft_node_ph2node(cxt, phandle);
-       if (node == NULL)
-               return NULL;
-
-       p = ft_root_node(cxt);
-
-       while ((next = ft_next(cxt, p, &atom)) != NULL) {
-               switch (atom.tag) {
-               case OF_DT_BEGIN_NODE:
-                       path_comp[depth++] = atom.name;
-                       if (p == node)
-                               goto found;
-
-                       break;
-
-               case OF_DT_END_NODE:
-                       if (--depth == 0)
-                               return NULL;
-               }
-
-               p = next;
-       }
-
-found:
-       pos = buf;
-       for (i = 1; i < depth; i++) {
-               int this_len;
-
-               if (len <= 1)
-                       return NULL;
-
-               *pos++ = '/';
-               len--;
-
-               strncpy(pos, path_comp[i], len);
-
-               if (pos[len - 1] != 0)
-                       return NULL;
-
-               this_len = strlen(pos);
-               len -= this_len;
-               pos += this_len;
-       }
-
-       return buf;
-}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/flatdevtree.h powerpc.git/arch/powerpc/boot/flatdevtree.h
--- linux-2.6.24/arch/powerpc/boot/flatdevtree.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/flatdevtree.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,113 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef FLATDEVTREE_H
-#define FLATDEVTREE_H
-
-#include "flatdevtree_env.h"
-
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER            0xd00dfeed      /* marker */
-#define OF_DT_BEGIN_NODE        0x1     /* Start of node, full name */
-#define OF_DT_END_NODE          0x2     /* End node */
-#define OF_DT_PROP              0x3     /* Property: name off, size, content */
-#define OF_DT_NOP               0x4     /* nop */
-#define OF_DT_END               0x9
-
-#define OF_DT_VERSION           0x10
-
-struct boot_param_header {
-       u32 magic;              /* magic word OF_DT_HEADER */
-       u32 totalsize;          /* total size of DT block */
-       u32 off_dt_struct;      /* offset to structure */
-       u32 off_dt_strings;     /* offset to strings */
-       u32 off_mem_rsvmap;     /* offset to memory reserve map */
-       u32 version;            /* format version */
-       u32 last_comp_version;  /* last compatible version */
-       /* version 2 fields below */
-       u32 boot_cpuid_phys;    /* Physical CPU id we're booting on */
-       /* version 3 fields below */
-       u32 dt_strings_size;    /* size of the DT strings block */
-};
-
-struct ft_reserve {
-       u64 start;
-       u64 len;
-};
-
-struct ft_region {
-       char *start;
-       unsigned long size;
-};
-
-enum ft_rgn_id {
-       FT_RSVMAP,
-       FT_STRUCT,
-       FT_STRINGS,
-       FT_N_REGION
-};
-
-#define FT_MAX_DEPTH   50
-
-struct ft_cxt {
-       struct boot_param_header *bph;
-       int max_size;           /* maximum size of tree */
-       int isordered;          /* everything in standard order */
-       void *(*realloc)(void *, unsigned long);
-       char *str_anchor;
-       char *p;                /* current insertion point in structs */
-       struct ft_region rgn[FT_N_REGION];
-       void *genealogy[FT_MAX_DEPTH+1];
-       char **node_tbl;
-       unsigned int node_max;
-       unsigned int nodes_used;
-};
-
-char *ft_begin_node(struct ft_cxt *cxt, const char *name);
-void ft_end_node(struct ft_cxt *cxt);
-
-void ft_begin_tree(struct ft_cxt *cxt);
-void ft_end_tree(struct ft_cxt *cxt);
-
-void ft_nop(struct ft_cxt *cxt);
-int ft_prop(struct ft_cxt *cxt, const char *name,
-           const void *data, unsigned int sz);
-int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str);
-int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val);
-void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size,
-             void *(*realloc_fn)(void *, unsigned long));
-int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size,
-               unsigned int max_find_device,
-               void *(*realloc_fn)(void *, unsigned long));
-int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
-
-void ft_dump_blob(const void *bphp);
-void ft_merge_blob(struct ft_cxt *cxt, void *blob);
-void *ft_find_device(struct ft_cxt *cxt, const void *top,
-                     const char *srch_path);
-void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path);
-int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
-               void *buf, const unsigned int buflen);
-int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
-               const void *buf, const unsigned int buflen);
-void *ft_get_parent(struct ft_cxt *cxt, const void *phandle);
-void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev,
-                                 const char *propname, const char *propval,
-                                 int proplen);
-void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name);
-char *ft_get_path(struct ft_cxt *cxt, const void *phandle, char *buf, int len);
-
-#endif /* FLATDEVTREE_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/flatdevtree_misc.c powerpc.git/arch/powerpc/boot/flatdevtree_misc.c
--- linux-2.6.24/arch/powerpc/boot/flatdevtree_misc.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/flatdevtree_misc.c    1970-01-01 01:00:00.000000000 +0100
@@ -1,79 +0,0 @@
-/*
- * This file does the necessary interface mapping between the bootwrapper
- * device tree operations and the interface provided by shared source
- * files flatdevicetree.[ch].
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <stddef.h>
-#include "flatdevtree.h"
-#include "ops.h"
-
-static struct ft_cxt cxt;
-
-static void *fdtm_finddevice(const char *name)
-{
-       return ft_find_device(&cxt, NULL, name);
-}
-
-static int fdtm_getprop(const void *phandle, const char *propname,
-                        void *buf, const int buflen)
-{
-       return ft_get_prop(&cxt, phandle, propname, buf, buflen);
-}
-
-static int fdtm_setprop(const void *phandle, const char *propname,
-                        const void *buf, const int buflen)
-{
-       return ft_set_prop(&cxt, phandle, propname, buf, buflen);
-}
-
-static void *fdtm_get_parent(const void *phandle)
-{
-       return ft_get_parent(&cxt, phandle);
-}
-
-static void *fdtm_create_node(const void *phandle, const char *name)
-{
-       return ft_create_node(&cxt, phandle, name);
-}
-
-static void *fdtm_find_node_by_prop_value(const void *prev,
-                                          const char *propname,
-                                          const char *propval,
-                                          int proplen)
-{
-       return ft_find_node_by_prop_value(&cxt, prev, propname,
-                                         propval, proplen);
-}
-
-static unsigned long fdtm_finalize(void)
-{
-       ft_end_tree(&cxt);
-       return (unsigned long)cxt.bph;
-}
-
-static char *fdtm_get_path(const void *phandle, char *buf, int len)
-{
-       return ft_get_path(&cxt, phandle, buf, len);
-}
-
-int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device)
-{
-       dt_ops.finddevice = fdtm_finddevice;
-       dt_ops.getprop = fdtm_getprop;
-       dt_ops.setprop = fdtm_setprop;
-       dt_ops.get_parent = fdtm_get_parent;
-       dt_ops.create_node = fdtm_create_node;
-       dt_ops.find_node_by_prop_value = fdtm_find_node_by_prop_value;
-       dt_ops.finalize = fdtm_finalize;
-       dt_ops.get_path = fdtm_get_path;
-
-       return ft_open(&cxt, dt_blob, max_size, max_find_device,
-                       platform_ops.realloc);
-}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/holly.c powerpc.git/arch/powerpc/boot/holly.c
--- linux-2.6.24/arch/powerpc/boot/holly.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/holly.c       2008-01-28 20:25:49.000000000 +0100
@@ -28,6 +28,6 @@
        u32 heapsize = 0x8000000 - (u32)_end; /* 128M */
 
        simple_alloc_init(_end, heapsize, 32, 64);
-       ft_init(_dtb_start, 0, 4);
+       fdt_init(_dtb_start);
        serial_console_init();
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/Makefile.libfdt powerpc.git/arch/powerpc/boot/libfdt/Makefile.libfdt
--- linux-2.6.24/arch/powerpc/boot/libfdt/Makefile.libfdt       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/Makefile.libfdt        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,14 @@
+# Makefile.libfdt
+#
+# This is not a complete Makefile of itself.  Instead, it is designed to
+# be easily embeddable into other systems of Makefiles.
+#
+LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+LIBFDT_INCLUDES = fdt.h libfdt.h
+LIBFDT_EXTRA = libfdt_internal.h
+LIBFDT_LIB = libfdt/libfdt.a
+
+LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
+
+$(LIBFDT_objdir)/$(LIBFDT_LIB): $(addprefix $(LIBFDT_objdir)/,$(LIBFDT_OBJS))
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/fdt.c powerpc.git/arch/powerpc/boot/libfdt/fdt.c
--- linux-2.6.24/arch/powerpc/boot/libfdt/fdt.c 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/fdt.c  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,156 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_check_header(const void *fdt)
+{
+       if (fdt_magic(fdt) == FDT_MAGIC) {
+               /* Complete tree */
+               if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
+                       return -FDT_ERR_BADVERSION;
+               if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
+                       return -FDT_ERR_BADVERSION;
+       } else if (fdt_magic(fdt) == SW_MAGIC) {
+               /* Unfinished sequential-write blob */
+               if (fdt_size_dt_struct(fdt) == 0)
+                       return -FDT_ERR_BADSTATE;
+       } else {
+               return -FDT_ERR_BADMAGIC;
+       }
+
+       return 0;
+}
+
+const void *fdt_offset_ptr(const void *fdt, int offset, int len)
+{
+       const void *p;
+
+       if (fdt_version(fdt) >= 0x11)
+               if (((offset + len) < offset)
+                   || ((offset + len) > fdt_size_dt_struct(fdt)))
+                       return NULL;
+
+       p = _fdt_offset_ptr(fdt, offset);
+
+       if (p + len < p)
+               return NULL;
+       return p;
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
+{
+       const uint32_t *tagp, *lenp;
+       uint32_t tag;
+       const char *p;
+
+       if (offset % FDT_TAGSIZE)
+               return -1;
+
+       tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
+       if (! tagp)
+               return FDT_END; /* premature end */
+       tag = fdt32_to_cpu(*tagp);
+       offset += FDT_TAGSIZE;
+
+       switch (tag) {
+       case FDT_BEGIN_NODE:
+               /* skip name */
+               do {
+                       p = fdt_offset_ptr(fdt, offset++, 1);
+               } while (p && (*p != '\0'));
+               if (! p)
+                       return FDT_END;
+               break;
+       case FDT_PROP:
+               lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
+               if (! lenp)
+                       return FDT_END;
+               /* skip name offset, length and value */
+               offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
+               break;
+       }
+
+       if (nextoffset)
+               *nextoffset = ALIGN(offset, FDT_TAGSIZE);
+
+       return tag;
+}
+
+const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
+{
+       int len = strlen(s) + 1;
+       const char *last = strtab + tabsize - len;
+       const char *p;
+
+       for (p = strtab; p <= last; p++)
+               if (memeq(p, s, len))
+                       return p;
+       return NULL;
+}
+
+int fdt_move(const void *fdt, void *buf, int bufsize)
+{
+       int err = fdt_check_header(fdt);
+
+       if (err)
+               return err;
+
+       if (fdt_totalsize(fdt) > bufsize)
+               return -FDT_ERR_NOSPACE;
+
+       memmove(buf, fdt, fdt_totalsize(fdt));
+       return 0;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/fdt.h powerpc.git/arch/powerpc/boot/libfdt/fdt.h
--- linux-2.6.24/arch/powerpc/boot/libfdt/fdt.h 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/fdt.h  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,60 @@
+#ifndef _FDT_H
+#define _FDT_H
+
+#ifndef __ASSEMBLY__
+
+struct fdt_header {
+       uint32_t magic;                  /* magic word FDT_MAGIC */
+       uint32_t totalsize;              /* total size of DT block */
+       uint32_t off_dt_struct;          /* offset to structure */
+       uint32_t off_dt_strings;         /* offset to strings */
+       uint32_t off_mem_rsvmap;         /* offset to memory reserve map */
+       uint32_t version;                /* format version */
+       uint32_t last_comp_version;      /* last compatible version */
+
+       /* version 2 fields below */
+       uint32_t boot_cpuid_phys;        /* Which physical CPU id we're
+                                           booting on */
+       /* version 3 fields below */
+       uint32_t size_dt_strings;        /* size of the strings block */
+
+       /* version 17 fields below */
+       uint32_t size_dt_struct;         /* size of the structure block */
+};
+
+struct fdt_reserve_entry {
+       uint64_t address;
+       uint64_t size;
+};
+
+struct fdt_node_header {
+       uint32_t tag;
+       char name[0];
+};
+
+struct fdt_property {
+       uint32_t tag;
+       uint32_t len;
+       uint32_t nameoff;
+       char data[0];
+};
+
+#endif /* !__ASSEMBLY */
+
+#define FDT_MAGIC      0xd00dfeed      /* 4: version, 4: total size */
+#define FDT_TAGSIZE    sizeof(uint32_t)
+
+#define FDT_BEGIN_NODE 0x1             /* Start node: full name */
+#define FDT_END_NODE   0x2             /* End node */
+#define FDT_PROP       0x3             /* Property: name off,
+                                          size, content */
+#define FDT_NOP                0x4             /* nop */
+#define FDT_END                0x9
+
+#define FDT_V1_SIZE    (7*sizeof(uint32_t))
+#define FDT_V2_SIZE    (FDT_V1_SIZE + sizeof(uint32_t))
+#define FDT_V3_SIZE    (FDT_V2_SIZE + sizeof(uint32_t))
+#define FDT_V16_SIZE   FDT_V3_SIZE
+#define FDT_V17_SIZE   (FDT_V16_SIZE + sizeof(uint32_t))
+
+#endif /* _FDT_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/fdt_ro.c powerpc.git/arch/powerpc/boot/libfdt/fdt_ro.c
--- linux-2.6.24/arch/powerpc/boot/libfdt/fdt_ro.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/fdt_ro.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,583 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+#define CHECK_HEADER(fdt) \
+       { \
+               int err; \
+               if ((err = fdt_check_header(fdt)) != 0) \
+                       return err; \
+       }
+
+static int nodename_eq(const void *fdt, int offset,
+                      const char *s, int len)
+{
+       const char *p = fdt_offset_ptr(fdt, offset, len+1);
+
+       if (! p)
+               /* short match */
+               return 0;
+
+       if (memcmp(p, s, len) != 0)
+               return 0;
+
+       if (p[len] == '\0')
+               return 1;
+       else if (!memchr(s, '@', len) && (p[len] == '@'))
+               return 1;
+       else
+               return 0;
+}
+
+const char *fdt_string(const void *fdt, int stroffset)
+{
+       return (char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
+}
+
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
+{
+       CHECK_HEADER(fdt);
+       *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
+       *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
+       return 0;
+}
+
+int fdt_num_mem_rsv(const void *fdt)
+{
+       int i = 0;
+
+       while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0)
+               i++;
+       return i;
+}
+
+int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+                              const char *name, int namelen)
+{
+       int level = 0;
+       uint32_t tag;
+       int offset, nextoffset;
+
+       CHECK_HEADER(fdt);
+
+       tag = fdt_next_tag(fdt, parentoffset, &nextoffset);
+       if (tag != FDT_BEGIN_NODE)
+               return -FDT_ERR_BADOFFSET;
+
+       do {
+               offset = nextoffset;
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+               switch (tag) {
+               case FDT_END:
+                       return -FDT_ERR_TRUNCATED;
+
+               case FDT_BEGIN_NODE:
+                       level++;
+                       if (level != 1)
+                               continue;
+                       if (nodename_eq(fdt, offset+FDT_TAGSIZE, name, namelen))
+                               /* Found it! */
+                               return offset;
+                       break;
+
+               case FDT_END_NODE:
+                       level--;
+                       break;
+
+               case FDT_PROP:
+               case FDT_NOP:
+                       break;
+
+               default:
+                       return -FDT_ERR_BADSTRUCTURE;
+               }
+       } while (level >= 0);
+
+       return -FDT_ERR_NOTFOUND;
+}
+
+int fdt_subnode_offset(const void *fdt, int parentoffset,
+                      const char *name)
+{
+       return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_path_offset(const void *fdt, const char *path)
+{
+       const char *end = path + strlen(path);
+       const char *p = path;
+       int offset = 0;
+
+       CHECK_HEADER(fdt);
+
+       if (*path != '/')
+               return -FDT_ERR_BADPATH;
+
+       while (*p) {
+               const char *q;
+
+               while (*p == '/')
+                       p++;
+               if (! *p)
+                       return offset;
+               q = strchr(p, '/');
+               if (! q)
+                       q = end;
+
+               offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
+               if (offset < 0)
+                       return offset;
+
+               p = q;
+       }
+
+       return offset;
+}
+
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
+{
+       const struct fdt_node_header *nh;
+       int err;
+
+       if ((err = fdt_check_header(fdt)) != 0)
+               goto fail;
+
+       err = -FDT_ERR_BADOFFSET;
+       nh = fdt_offset_ptr(fdt, nodeoffset, sizeof(*nh));
+       if (!nh || (fdt32_to_cpu(nh->tag) != FDT_BEGIN_NODE))
+               goto fail;
+
+       if (len)
+               *len = strlen(nh->name);
+
+       return nh->name;
+
+ fail:
+       if (len)
+               *len = err;
+       return NULL;
+}
+
+const struct fdt_property *fdt_get_property(const void *fdt,
+                                           int nodeoffset,
+                                           const char *name, int *lenp)
+{
+       uint32_t tag;
+       const struct fdt_property *prop;
+       int namestroff;
+       int offset, nextoffset;
+       int err;
+
+       if ((err = fdt_check_header(fdt)) != 0)
+               goto fail;
+
+       err = -FDT_ERR_BADOFFSET;
+       if (nodeoffset % FDT_TAGSIZE)
+               goto fail;
+
+       tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
+       if (tag != FDT_BEGIN_NODE)
+               goto fail;
+
+       do {
+               offset = nextoffset;
+
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+               switch (tag) {
+               case FDT_END:
+                       err = -FDT_ERR_TRUNCATED;
+                       goto fail;
+
+               case FDT_BEGIN_NODE:
+               case FDT_END_NODE:
+               case FDT_NOP:
+                       break;
+
+               case FDT_PROP:
+                       err = -FDT_ERR_BADSTRUCTURE;
+                       prop = fdt_offset_ptr(fdt, offset, sizeof(*prop));
+                       if (! prop)
+                               goto fail;
+                       namestroff = fdt32_to_cpu(prop->nameoff);
+                       if (streq(fdt_string(fdt, namestroff), name)) {
+                               /* Found it! */
+                               int len = fdt32_to_cpu(prop->len);
+                               prop = fdt_offset_ptr(fdt, offset,
+                                                     sizeof(*prop)+len);
+                               if (! prop)
+                                       goto fail;
+
+                               if (lenp)
+                                       *lenp = len;
+
+                               return prop;
+                       }
+                       break;
+
+               default:
+                       err = -FDT_ERR_BADSTRUCTURE;
+                       goto fail;
+               }
+       } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE));
+
+       err = -FDT_ERR_NOTFOUND;
+ fail:
+       if (lenp)
+               *lenp = err;
+       return NULL;
+}
+
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+                 const char *name, int *lenp)
+{
+       const struct fdt_property *prop;
+
+       prop = fdt_get_property(fdt, nodeoffset, name, lenp);
+       if (! prop)
+               return NULL;
+
+       return prop->data;
+}
+
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
+{
+       const uint32_t *php;
+       int len;
+
+       php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len);
+       if (!php || (len != sizeof(*php)))
+               return 0;
+
+       return fdt32_to_cpu(*php);
+}
+
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
+{
+       uint32_t tag;
+       int p = 0, overflow = 0;
+       int offset, nextoffset, namelen;
+       const char *name;
+
+       CHECK_HEADER(fdt);
+
+       tag = fdt_next_tag(fdt, 0, &nextoffset);
+       if (tag != FDT_BEGIN_NODE)
+               return -FDT_ERR_BADSTRUCTURE;
+
+       if (buflen < 2)
+               return -FDT_ERR_NOSPACE;
+       buf[0] = '/';
+       p = 1;
+
+       while (nextoffset <= nodeoffset) {
+               offset = nextoffset;
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+               switch (tag) {
+               case FDT_END:
+                       return -FDT_ERR_BADOFFSET;
+
+               case FDT_BEGIN_NODE:
+                       name = fdt_get_name(fdt, offset, &namelen);
+                       if (!name)
+                               return namelen;
+                       if (overflow || ((p + namelen + 1) > buflen)) {
+                               overflow++;
+                               break;
+                       }
+                       memcpy(buf + p, name, namelen);
+                       p += namelen;
+                       buf[p++] = '/';
+                       break;
+
+               case FDT_END_NODE:
+                       if (overflow) {
+                               overflow--;
+                               break;
+                       }
+                       do {
+                               p--;
+                       } while  (buf[p-1] != '/');
+                       break;
+
+               case FDT_PROP:
+               case FDT_NOP:
+                       break;
+
+               default:
+                       return -FDT_ERR_BADSTRUCTURE;
+               }
+       }
+
+       if (overflow)
+               return -FDT_ERR_NOSPACE;
+
+       if (p > 1) /* special case so that root path is "/", not "" */
+               p--;
+       buf[p] = '\0';
+       return p;
+}
+
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+                                int supernodedepth, int *nodedepth)
+{
+       int level = -1;
+       uint32_t tag;
+       int offset, nextoffset = 0;
+       int supernodeoffset = -FDT_ERR_INTERNAL;
+
+       CHECK_HEADER(fdt);
+
+       if (supernodedepth < 0)
+               return -FDT_ERR_NOTFOUND;
+
+       do {
+               offset = nextoffset;
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+               switch (tag) {
+               case FDT_END:
+                       return -FDT_ERR_BADOFFSET;
+
+               case FDT_BEGIN_NODE:
+                       level++;
+                       if (level == supernodedepth)
+                               supernodeoffset = offset;
+                       break;
+
+               case FDT_END_NODE:
+                       level--;
+                       break;
+
+               case FDT_PROP:
+               case FDT_NOP:
+                       break;
+
+               default:
+                       return -FDT_ERR_BADSTRUCTURE;
+               }
+       } while (offset < nodeoffset);
+
+       if (nodedepth)
+               *nodedepth = level;
+
+       if (supernodedepth > level)
+               return -FDT_ERR_NOTFOUND;
+       return supernodeoffset;
+}
+
+int fdt_node_depth(const void *fdt, int nodeoffset)
+{
+       int nodedepth;
+       int err;
+
+       err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
+       if (err)
+               return (err < 0) ? err : -FDT_ERR_INTERNAL;
+       return nodedepth;
+}
+
+int fdt_parent_offset(const void *fdt, int nodeoffset)
+{
+       int nodedepth = fdt_node_depth(fdt, nodeoffset);
+
+       if (nodedepth < 0)
+               return nodedepth;
+       return fdt_supernode_atdepth_offset(fdt, nodeoffset,
+                                           nodedepth - 1, NULL);
+}
+
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+                                 const char *propname,
+                                 const void *propval, int proplen)
+{
+       uint32_t tag;
+       int offset, nextoffset;
+       const void *val;
+       int len;
+
+       CHECK_HEADER(fdt);
+
+       if (startoffset >= 0) {
+               tag = fdt_next_tag(fdt, startoffset, &nextoffset);
+               if (tag != FDT_BEGIN_NODE)
+                       return -FDT_ERR_BADOFFSET;
+       } else {
+               nextoffset = 0;
+       }
+
+       /* FIXME: The algorithm here is pretty horrible: we scan each
+        * property of a node in fdt_getprop(), then if that didn't
+        * find what we want, we scan over them again making our way
+        * to the next node.  Still it's the easiest to implement
+        * approach; performance can come later. */
+       do {
+               offset = nextoffset;
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+               switch (tag) {
+               case FDT_BEGIN_NODE:
+                       val = fdt_getprop(fdt, offset, propname, &len);
+                       if (val
+                           && (len == proplen)
+                           && (memcmp(val, propval, len) == 0))
+                               return offset;
+                       break;
+
+               case FDT_PROP:
+               case FDT_END:
+               case FDT_END_NODE:
+               case FDT_NOP:
+                       break;
+
+               default:
+                       return -FDT_ERR_BADSTRUCTURE;
+               }
+       } while (tag != FDT_END);
+
+       return -FDT_ERR_NOTFOUND;
+}
+
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
+{
+       if ((phandle == 0) || (phandle == -1))
+               return -FDT_ERR_BADPHANDLE;
+       phandle = cpu_to_fdt32(phandle);
+       return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle",
+                                            &phandle, sizeof(phandle));
+}
+
+int _stringlist_contains(const void *strlist, int listlen, const char *str)
+{
+       int len = strlen(str);
+       const void *p;
+
+       while (listlen >= len) {
+               if (memcmp(str, strlist, len+1) == 0)
+                       return 1;
+               p = memchr(strlist, '\0', listlen);
+               if (!p)
+                       return 0; /* malformed strlist.. */
+               listlen -= (p-strlist) + 1;
+               strlist = p + 1;
+       }
+       return 0;
+}
+
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+                             const char *compatible)
+{
+       const void *prop;
+       int len;
+
+       prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
+       if (!prop)
+               return len;
+       if (_stringlist_contains(prop, len, compatible))
+               return 0;
+       else
+               return 1;
+}
+
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+                                 const char *compatible)
+{
+       uint32_t tag;
+       int offset, nextoffset;
+       int err;
+
+       CHECK_HEADER(fdt);
+
+       if (startoffset >= 0) {
+               tag = fdt_next_tag(fdt, startoffset, &nextoffset);
+               if (tag != FDT_BEGIN_NODE)
+                       return -FDT_ERR_BADOFFSET;
+       } else {
+               nextoffset = 0;
+       }
+
+       /* FIXME: The algorithm here is pretty horrible: we scan each
+        * property of a node in fdt_node_check_compatible(), then if
+        * that didn't find what we want, we scan over them again
+        * making our way to the next node.  Still it's the easiest to
+        * implement approach; performance can come later. */
+       do {
+               offset = nextoffset;
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+               switch (tag) {
+               case FDT_BEGIN_NODE:
+                       err = fdt_node_check_compatible(fdt, offset,
+                                                       compatible);
+                       if ((err < 0)
+                           && (err != -FDT_ERR_NOTFOUND))
+                               return err;
+                       else if (err == 0)
+                               return offset;
+                       break;
+
+               case FDT_PROP:
+               case FDT_END:
+               case FDT_END_NODE:
+               case FDT_NOP:
+                       break;
+
+               default:
+                       return -FDT_ERR_BADSTRUCTURE;
+               }
+       } while (tag != FDT_END);
+
+       return -FDT_ERR_NOTFOUND;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/fdt_rw.c powerpc.git/arch/powerpc/boot/libfdt/fdt_rw.c
--- linux-2.6.24/arch/powerpc/boot/libfdt/fdt_rw.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/fdt_rw.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,447 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int _blocks_misordered(const void *fdt,
+                             int mem_rsv_size, int struct_size)
+{
+       return (fdt_off_mem_rsvmap(fdt) < ALIGN(sizeof(struct fdt_header), 8))
+               || (fdt_off_dt_struct(fdt) <
+                   (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
+               || (fdt_off_dt_strings(fdt) <
+                   (fdt_off_dt_struct(fdt) + struct_size))
+               || (fdt_totalsize(fdt) <
+                   (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
+}
+
+static int rw_check_header(void *fdt)
+{
+       int err;
+
+       if ((err = fdt_check_header(fdt)))
+               return err;
+       if (fdt_version(fdt) < 17)
+               return -FDT_ERR_BADVERSION;
+       if (_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
+                              fdt_size_dt_struct(fdt)))
+               return -FDT_ERR_BADLAYOUT;
+       if (fdt_version(fdt) > 17)
+               fdt_set_version(fdt, 17);
+
+       return 0;
+}
+
+#define RW_CHECK_HEADER(fdt) \
+       { \
+               int err; \
+               if ((err = rw_check_header(fdt)) != 0) \
+                       return err; \
+       }
+
+static inline int _blob_data_size(void *fdt)
+{
+       return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+}
+
+static int _blob_splice(void *fdt, void *p, int oldlen, int newlen)
+{
+       void *end = fdt + _blob_data_size(fdt);
+
+       if (((p + oldlen) < p) || ((p + oldlen) > end))
+               return -FDT_ERR_BADOFFSET;
+       if ((end - oldlen + newlen) > (fdt + fdt_totalsize(fdt)))
+               return -FDT_ERR_NOSPACE;
+       memmove(p + newlen, p + oldlen, end - p - oldlen);
+       return 0;
+}
+
+static int _blob_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
+                               int oldn, int newn)
+{
+       int delta = (newn - oldn) * sizeof(*p);
+       int err;
+       err = _blob_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
+       if (err)
+               return err;
+       fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
+       fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+       return 0;
+}
+
+static int _blob_splice_struct(void *fdt, void *p,
+                              int oldlen, int newlen)
+{
+       int delta = newlen - oldlen;
+       int err;
+
+       if ((err = _blob_splice(fdt, p, oldlen, newlen)))
+               return err;
+
+       fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
+       fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+       return 0;
+}
+
+static int _blob_splice_string(void *fdt, int newlen)
+{
+       void *p = fdt + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+       int err;
+
+       if ((err = _blob_splice(fdt, p, 0, newlen)))
+               return err;
+
+       fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
+       return 0;
+}
+
+static int _find_add_string(void *fdt, const char *s)
+{
+       char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
+       const char *p;
+       char *new;
+       int len = strlen(s) + 1;
+       int err;
+
+       p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s);
+       if (p)
+               /* found it */
+               return (p - strtab);
+
+       new = strtab + fdt_size_dt_strings(fdt);
+       err = _blob_splice_string(fdt, len);
+       if (err)
+               return err;
+
+       memcpy(new, s, len);
+       return (new - strtab);
+}
+
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
+{
+       struct fdt_reserve_entry *re;
+       int err;
+
+       if ((err = rw_check_header(fdt)))
+               return err;
+
+       re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
+       err = _blob_splice_mem_rsv(fdt, re, 0, 1);
+       if (err)
+               return err;
+
+       re->address = cpu_to_fdt64(address);
+       re->size = cpu_to_fdt64(size);
+       return 0;
+}
+
+int fdt_del_mem_rsv(void *fdt, int n)
+{
+       struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
+       int err;
+
+       if ((err = rw_check_header(fdt)))
+               return err;
+       if (n >= fdt_num_mem_rsv(fdt))
+               return -FDT_ERR_NOTFOUND;
+
+       err = _blob_splice_mem_rsv(fdt, re, 1, 0);
+       if (err)
+               return err;
+       return 0;
+}
+
+static int _resize_property(void *fdt, int nodeoffset, const char *name, int len,
+                           struct fdt_property **prop)
+{
+       int oldlen;
+       int err;
+
+       *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+       if (! (*prop))
+               return oldlen;
+
+       if ((err = _blob_splice_struct(fdt, (*prop)->data,
+                                      ALIGN(oldlen, FDT_TAGSIZE),
+                                      ALIGN(len, FDT_TAGSIZE))))
+               return err;
+
+       (*prop)->len = cpu_to_fdt32(len);
+       return 0;
+}
+
+static int _add_property(void *fdt, int nodeoffset, const char *name, int len,
+                        struct fdt_property **prop)
+{
+       uint32_t tag;
+       int proplen;
+       int nextoffset;
+       int namestroff;
+       int err;
+
+       tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
+       if (tag != FDT_BEGIN_NODE)
+               return -FDT_ERR_BADOFFSET;
+
+       namestroff = _find_add_string(fdt, name);
+       if (namestroff < 0)
+               return namestroff;
+
+       *prop = _fdt_offset_ptr_w(fdt, nextoffset);
+       proplen = sizeof(**prop) + ALIGN(len, FDT_TAGSIZE);
+
+       err = _blob_splice_struct(fdt, *prop, 0, proplen);
+       if (err)
+               return err;
+
+       (*prop)->tag = cpu_to_fdt32(FDT_PROP);
+       (*prop)->nameoff = cpu_to_fdt32(namestroff);
+       (*prop)->len = cpu_to_fdt32(len);
+       return 0;
+}
+
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+               const void *val, int len)
+{
+       struct fdt_property *prop;
+       int err;
+
+       if ((err = rw_check_header(fdt)))
+               return err;
+
+       err = _resize_property(fdt, nodeoffset, name, len, &prop);
+       if (err == -FDT_ERR_NOTFOUND)
+               err = _add_property(fdt, nodeoffset, name, len, &prop);
+       if (err)
+               return err;
+
+       memcpy(prop->data, val, len);
+       return 0;
+}
+
+int fdt_delprop(void *fdt, int nodeoffset, const char *name)
+{
+       struct fdt_property *prop;
+       int len, proplen;
+
+       RW_CHECK_HEADER(fdt);
+
+       prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+       if (! prop)
+               return len;
+
+       proplen = sizeof(*prop) + ALIGN(len, FDT_TAGSIZE);
+       return _blob_splice_struct(fdt, prop, proplen, 0);
+}
+
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+                           const char *name, int namelen)
+{
+       struct fdt_node_header *nh;
+       int offset, nextoffset;
+       int nodelen;
+       int err;
+       uint32_t tag;
+       uint32_t *endtag;
+
+       RW_CHECK_HEADER(fdt);
+
+       offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
+       if (offset >= 0)
+               return -FDT_ERR_EXISTS;
+       else if (offset != -FDT_ERR_NOTFOUND)
+               return offset;
+
+       /* Try to place the new node after the parent's properties */
+       fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */
+       do {
+               offset = nextoffset;
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+       } while (tag == FDT_PROP);
+
+       nh = _fdt_offset_ptr_w(fdt, offset);
+       nodelen = sizeof(*nh) + ALIGN(namelen+1, FDT_TAGSIZE) + FDT_TAGSIZE;
+
+       err = _blob_splice_struct(fdt, nh, 0, nodelen);
+       if (err)
+               return err;
+
+       nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+       memset(nh->name, 0, ALIGN(namelen+1, FDT_TAGSIZE));
+       memcpy(nh->name, name, namelen);
+       endtag = (uint32_t *)((void *)nh + nodelen - FDT_TAGSIZE);
+       *endtag = cpu_to_fdt32(FDT_END_NODE);
+
+       return offset;
+}
+
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name)
+{
+       return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_del_node(void *fdt, int nodeoffset)
+{
+       int endoffset;
+
+       RW_CHECK_HEADER(fdt);
+
+       endoffset = _fdt_node_end_offset(fdt, nodeoffset);
+       if (endoffset < 0)
+               return endoffset;
+
+       return _blob_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
+                                  endoffset - nodeoffset, 0);
+}
+
+static void _packblocks(const void *fdt, void *buf,
+                      int mem_rsv_size, int struct_size)
+{
+       int mem_rsv_off, struct_off, strings_off;
+
+       mem_rsv_off = ALIGN(sizeof(struct fdt_header), 8);
+       struct_off = mem_rsv_off + mem_rsv_size;
+       strings_off = struct_off + struct_size;
+
+       memmove(buf + mem_rsv_off, fdt + fdt_off_mem_rsvmap(fdt), mem_rsv_size);
+       fdt_set_off_mem_rsvmap(buf, mem_rsv_off);
+
+       memmove(buf + struct_off, fdt + fdt_off_dt_struct(fdt), struct_size);
+       fdt_set_off_dt_struct(buf, struct_off);
+       fdt_set_size_dt_struct(buf, struct_size);
+
+       memmove(buf + strings_off, fdt + fdt_off_dt_strings(fdt),
+               fdt_size_dt_strings(fdt));
+       fdt_set_off_dt_strings(buf, strings_off);
+       fdt_set_size_dt_strings(buf, fdt_size_dt_strings(fdt));
+}
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize)
+{
+       int err;
+       int mem_rsv_size, struct_size;
+       int newsize;
+       void *tmp;
+
+       err = fdt_check_header(fdt);
+       if (err)
+               return err;
+
+       mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+               * sizeof(struct fdt_reserve_entry);
+
+       if (fdt_version(fdt) >= 17) {
+               struct_size = fdt_size_dt_struct(fdt);
+       } else {
+               struct_size = 0;
+               while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
+                       ;
+       }
+
+       if (!_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
+               /* no further work necessary */
+               err = fdt_move(fdt, buf, bufsize);
+               if (err)
+                       return err;
+               fdt_set_version(buf, 17);
+               fdt_set_size_dt_struct(buf, struct_size);
+               fdt_set_totalsize(buf, bufsize);
+               return 0;
+       }
+
+       /* Need to reorder */
+       newsize = ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+               + struct_size + fdt_size_dt_strings(fdt);
+
+       if (bufsize < newsize)
+               return -FDT_ERR_NOSPACE;
+
+       if (((buf + newsize) <= fdt)
+           || (buf >= (fdt + fdt_totalsize(fdt)))) {
+               tmp = buf;
+       } else {
+               tmp = (void *)fdt + fdt_totalsize(fdt);
+               if ((tmp + newsize) > (buf + bufsize))
+                       return -FDT_ERR_NOSPACE;
+       }
+
+       _packblocks(fdt, tmp, mem_rsv_size, struct_size);
+       memmove(buf, tmp, newsize);
+
+       fdt_set_magic(buf, FDT_MAGIC);
+       fdt_set_totalsize(buf, bufsize);
+       fdt_set_version(buf, 17);
+       fdt_set_last_comp_version(buf, 16);
+       fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt));
+
+       return 0;
+}
+
+int fdt_pack(void *fdt)
+{
+       int mem_rsv_size;
+       int err;
+
+       err = rw_check_header(fdt);
+       if (err)
+               return err;
+
+       mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+               * sizeof(struct fdt_reserve_entry);
+       _packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
+       fdt_set_totalsize(fdt, _blob_data_size(fdt));
+
+       return 0;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/fdt_strerror.c powerpc.git/arch/powerpc/boot/libfdt/fdt_strerror.c
--- linux-2.6.24/arch/powerpc/boot/libfdt/fdt_strerror.c        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/fdt_strerror.c 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,96 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+struct errtabent {
+       const char *str;
+};
+
+#define ERRTABENT(val) \
+       [(val)] = { .str = #val, }
+
+static struct errtabent errtable[] = {
+       ERRTABENT(FDT_ERR_NOTFOUND),
+       ERRTABENT(FDT_ERR_EXISTS),
+       ERRTABENT(FDT_ERR_NOSPACE),
+
+       ERRTABENT(FDT_ERR_BADOFFSET),
+       ERRTABENT(FDT_ERR_BADPATH),
+       ERRTABENT(FDT_ERR_BADSTATE),
+
+       ERRTABENT(FDT_ERR_TRUNCATED),
+       ERRTABENT(FDT_ERR_BADMAGIC),
+       ERRTABENT(FDT_ERR_BADVERSION),
+       ERRTABENT(FDT_ERR_BADSTRUCTURE),
+       ERRTABENT(FDT_ERR_BADLAYOUT),
+};
+#define ERRTABSIZE     (sizeof(errtable) / sizeof(errtable[0]))
+
+const char *fdt_strerror(int errval)
+{
+       if (errval > 0)
+               return "<valid offset/length>";
+       else if (errval == 0)
+               return "<no error>";
+       else if (errval > -ERRTABSIZE) {
+               const char *s = errtable[-errval].str;
+
+               if (s)
+                       return s;
+       }
+
+       return "<unknown error>";
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/fdt_sw.c powerpc.git/arch/powerpc/boot/libfdt/fdt_sw.c
--- linux-2.6.24/arch/powerpc/boot/libfdt/fdt_sw.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/fdt_sw.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,258 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int check_header_sw(void *fdt)
+{
+       if (fdt_magic(fdt) != SW_MAGIC)
+               return -FDT_ERR_BADMAGIC;
+       return 0;
+}
+
+static void *grab_space(void *fdt, int len)
+{
+       int offset = fdt_size_dt_struct(fdt);
+       int spaceleft;
+
+       spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt)
+               - fdt_size_dt_strings(fdt);
+
+       if ((offset + len < offset) || (offset + len > spaceleft))
+               return NULL;
+
+       fdt_set_size_dt_struct(fdt, offset + len);
+       return fdt_offset_ptr_w(fdt, offset, len);
+}
+
+int fdt_create(void *buf, int bufsize)
+{
+       void *fdt = buf;
+
+       if (bufsize < sizeof(struct fdt_header))
+               return -FDT_ERR_NOSPACE;
+
+       memset(buf, 0, bufsize);
+
+       fdt_set_magic(fdt, SW_MAGIC);
+       fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
+       fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
+       fdt_set_totalsize(fdt,  bufsize);
+
+       fdt_set_off_mem_rsvmap(fdt, ALIGN(sizeof(struct fdt_header),
+                                         sizeof(struct fdt_reserve_entry)));
+       fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
+       fdt_set_off_dt_strings(fdt, bufsize);
+
+       return 0;
+}
+
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
+{
+       struct fdt_reserve_entry *re;
+       int err = check_header_sw(fdt);
+       int offset;
+
+       if (err)
+               return err;
+       if (fdt_size_dt_struct(fdt))
+               return -FDT_ERR_BADSTATE;
+
+       offset = fdt_off_dt_struct(fdt);
+       if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
+               return -FDT_ERR_NOSPACE;
+
+       re = (struct fdt_reserve_entry *)(fdt + offset);
+       re->address = cpu_to_fdt64(addr);
+       re->size = cpu_to_fdt64(size);
+
+       fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
+
+       return 0;
+}
+
+int fdt_finish_reservemap(void *fdt)
+{
+       return fdt_add_reservemap_entry(fdt, 0, 0);
+}
+
+int fdt_begin_node(void *fdt, const char *name)
+{
+       struct fdt_node_header *nh;
+       int err = check_header_sw(fdt);
+       int namelen = strlen(name) + 1;
+
+       if (err)
+               return err;
+
+       nh = grab_space(fdt, sizeof(*nh) + ALIGN(namelen, FDT_TAGSIZE));
+       if (! nh)
+               return -FDT_ERR_NOSPACE;
+
+       nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+       memcpy(nh->name, name, namelen);
+       return 0;
+}
+
+int fdt_end_node(void *fdt)
+{
+       uint32_t *en;
+       int err = check_header_sw(fdt);
+
+       if (err)
+               return err;
+
+       en = grab_space(fdt, FDT_TAGSIZE);
+       if (! en)
+               return -FDT_ERR_NOSPACE;
+
+       *en = cpu_to_fdt32(FDT_END_NODE);
+       return 0;
+}
+
+static int find_add_string(void *fdt, const char *s)
+{
+       char *strtab = (char *)fdt + fdt_totalsize(fdt);
+       const char *p;
+       int strtabsize = fdt_size_dt_strings(fdt);
+       int len = strlen(s) + 1;
+       int struct_top, offset;
+
+       p = _fdt_find_string(strtab - strtabsize, strtabsize, s);
+       if (p)
+               return p - strtab;
+
+       /* Add it */
+       offset = -strtabsize - len;
+       struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+       if (fdt_totalsize(fdt) + offset < struct_top)
+               return 0; /* no more room :( */
+
+       memcpy(strtab + offset, s, len);
+       fdt_set_size_dt_strings(fdt, strtabsize + len);
+       return offset;
+}
+
+int fdt_property(void *fdt, const char *name, const void *val, int len)
+{
+       struct fdt_property *prop;
+       int err = check_header_sw(fdt);
+       int nameoff;
+
+       if (err)
+               return err;
+
+       nameoff = find_add_string(fdt, name);
+       if (nameoff == 0)
+               return -FDT_ERR_NOSPACE;
+
+       prop = grab_space(fdt, sizeof(*prop) + ALIGN(len, FDT_TAGSIZE));
+       if (! prop)
+               return -FDT_ERR_NOSPACE;
+
+       prop->tag = cpu_to_fdt32(FDT_PROP);
+       prop->nameoff = cpu_to_fdt32(nameoff);
+       prop->len = cpu_to_fdt32(len);
+       memcpy(prop->data, val, len);
+       return 0;
+}
+
+int fdt_finish(void *fdt)
+{
+       int err = check_header_sw(fdt);
+       char *p = (char *)fdt;
+       uint32_t *end;
+       int oldstroffset, newstroffset;
+       uint32_t tag;
+       int offset, nextoffset;
+
+       if (err)
+               return err;
+
+       /* Add terminator */
+       end = grab_space(fdt, sizeof(*end));
+       if (! end)
+               return -FDT_ERR_NOSPACE;
+       *end = cpu_to_fdt32(FDT_END);
+
+       /* Relocate the string table */
+       oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
+       newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+       memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
+       fdt_set_off_dt_strings(fdt, newstroffset);
+
+       /* Walk the structure, correcting string offsets */
+       offset = 0;
+       while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
+               if (tag == FDT_PROP) {
+                       struct fdt_property *prop =
+                               fdt_offset_ptr_w(fdt, offset, sizeof(*prop));
+                       int nameoff;
+
+                       if (! prop)
+                               return -FDT_ERR_BADSTRUCTURE;
+
+                       nameoff = fdt32_to_cpu(prop->nameoff);
+                       nameoff += fdt_size_dt_strings(fdt);
+                       prop->nameoff = cpu_to_fdt32(nameoff);
+               }
+               offset = nextoffset;
+       }
+
+       /* Finally, adjust the header */
+       fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
+       fdt_set_magic(fdt, FDT_MAGIC);
+       return 0;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/fdt_wip.c powerpc.git/arch/powerpc/boot/libfdt/fdt_wip.c
--- linux-2.6.24/arch/powerpc/boot/libfdt/fdt_wip.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/fdt_wip.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,144 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+                       const void *val, int len)
+{
+       void *propval;
+       int proplen;
+
+       propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
+       if (! propval)
+               return proplen;
+
+       if (proplen != len)
+               return -FDT_ERR_NOSPACE;
+
+       memcpy(propval, val, len);
+       return 0;
+}
+
+static void nop_region(void *start, int len)
+{
+       uint32_t *p;
+
+       for (p = start; (void *)p < (start + len); p++)
+               *p = cpu_to_fdt32(FDT_NOP);
+}
+
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
+{
+       struct fdt_property *prop;
+       int len;
+
+       prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+       if (! prop)
+               return len;
+
+       nop_region(prop, len + sizeof(*prop));
+
+       return 0;
+}
+
+int _fdt_node_end_offset(void *fdt, int nodeoffset)
+{
+       int level = 0;
+       uint32_t tag;
+       int offset, nextoffset;
+
+       tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
+       if (tag != FDT_BEGIN_NODE)
+               return -FDT_ERR_BADOFFSET;
+       do {
+               offset = nextoffset;
+               tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+               switch (tag) {
+               case FDT_END:
+                       return offset;
+
+               case FDT_BEGIN_NODE:
+                       level++;
+                       break;
+
+               case FDT_END_NODE:
+                       level--;
+                       break;
+
+               case FDT_PROP:
+               case FDT_NOP:
+                       break;
+
+               default:
+                       return -FDT_ERR_BADSTRUCTURE;
+               }
+       } while (level >= 0);
+
+       return nextoffset;
+}
+
+int fdt_nop_node(void *fdt, int nodeoffset)
+{
+       int endoffset;
+
+       endoffset = _fdt_node_end_offset(fdt, nodeoffset);
+       if (endoffset < 0)
+               return endoffset;
+
+       nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), endoffset - nodeoffset);
+       return 0;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/libfdt.h powerpc.git/arch/powerpc/boot/libfdt/libfdt.h
--- linux-2.6.24/arch/powerpc/boot/libfdt/libfdt.h      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/libfdt.h       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,721 @@
+#ifndef _LIBFDT_H
+#define _LIBFDT_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <libfdt_env.h>
+#include <fdt.h>
+
+#define FDT_FIRST_SUPPORTED_VERSION    0x10
+#define FDT_LAST_SUPPORTED_VERSION     0x11
+
+/* Error codes: informative error codes */
+#define FDT_ERR_NOTFOUND       1
+       /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
+#define FDT_ERR_EXISTS         2
+       /* FDT_ERR_EXISTS: Attemped to create a node or property which
+        * already exists */
+#define FDT_ERR_NOSPACE                3
+       /* FDT_ERR_NOSPACE: Operation needed to expand the device
+        * tree, but its buffer did not have sufficient space to
+        * contain the expanded tree. Use fdt_open_into() to move the
+        * device tree to a buffer with more space. */
+
+/* Error codes: codes for bad parameters */
+#define FDT_ERR_BADOFFSET      4
+       /* FDT_ERR_BADOFFSET: Function was passed a structure block
+        * offset which is out-of-bounds, or which points to an
+        * unsuitable part of the structure for the operation. */
+#define FDT_ERR_BADPATH                5
+       /* FDT_ERR_BADPATH: Function was passed a badly formatted path
+        * (e.g. missing a leading / for a function which requires an
+        * absolute path) */
+#define FDT_ERR_BADPHANDLE     6
+       /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle
+        * value.  phandle values of 0 and -1 are not permitted. */
+#define FDT_ERR_BADSTATE       7
+       /* FDT_ERR_BADSTATE: Function was passed an incomplete device
+        * tree created by the sequential-write functions, which is
+        * not sufficiently complete for the requested operation. */
+
+/* Error codes: codes for bad device tree blobs */
+#define FDT_ERR_TRUNCATED      8
+       /* FDT_ERR_TRUNCATED: Structure block of the given device tree
+        * ends without an FDT_END tag. */
+#define FDT_ERR_BADMAGIC       9
+       /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
+        * device tree at all - it is missing the flattened device
+        * tree magic number. */
+#define FDT_ERR_BADVERSION     10
+       /* FDT_ERR_BADVERSION: Given device tree has a version which
+        * can't be handled by the requested operation.  For
+        * read-write functions, this may mean that fdt_open_into() is
+        * required to convert the tree to the expected version. */
+#define FDT_ERR_BADSTRUCTURE   11
+       /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
+        * structure block or other serious error (e.g. misnested
+        * nodes, or subnodes preceding properties). */
+#define FDT_ERR_BADLAYOUT      12
+       /* FDT_ERR_BADLAYOUT: For read-write functions, the given
+        * device tree has it's sub-blocks in an order that the
+        * function can't handle (memory reserve map, then structure,
+        * then strings).  Use fdt_open_into() to reorganize the tree
+        * into a form suitable for the read-write operations. */
+
+/* "Can't happen" error indicating a bug in libfdt */
+#define FDT_ERR_INTERNAL       13
+       /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
+        * Should never be returned, if it is, it indicates a bug in
+        * libfdt itself. */
+
+#define FDT_ERR_MAX            13
+
+/**********************************************************************/
+/* Low-level functions (you probably don't need these)                */
+/**********************************************************************/
+
+const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
+{
+       return (void *)fdt_offset_ptr(fdt, offset, checklen);
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
+
+/**********************************************************************/
+/* General functions                                                  */
+/**********************************************************************/
+
+#define fdt_get_header(fdt, field) \
+       (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
+#define fdt_magic(fdt)                         (fdt_get_header(fdt, magic))
+#define fdt_totalsize(fdt)             (fdt_get_header(fdt, totalsize))
+#define fdt_off_dt_struct(fdt)         (fdt_get_header(fdt, off_dt_struct))
+#define fdt_off_dt_strings(fdt)                (fdt_get_header(fdt, off_dt_strings))
+#define fdt_off_mem_rsvmap(fdt)                (fdt_get_header(fdt, off_mem_rsvmap))
+#define fdt_version(fdt)               (fdt_get_header(fdt, version))
+#define fdt_last_comp_version(fdt)     (fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt)       (fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt)       (fdt_get_header(fdt, size_dt_strings))
+#define fdt_size_dt_struct(fdt)                (fdt_get_header(fdt, size_dt_struct))
+
+#define __fdt_set_hdr(name) \
+       static inline void fdt_set_##name(void *fdt, uint32_t val) \
+       { \
+               struct fdt_header *fdth = fdt; \
+               fdth->name = cpu_to_fdt32(val); \
+       }
+__fdt_set_hdr(magic);
+__fdt_set_hdr(totalsize);
+__fdt_set_hdr(off_dt_struct);
+__fdt_set_hdr(off_dt_strings);
+__fdt_set_hdr(off_mem_rsvmap);
+__fdt_set_hdr(version);
+__fdt_set_hdr(last_comp_version);
+__fdt_set_hdr(boot_cpuid_phys);
+__fdt_set_hdr(size_dt_strings);
+__fdt_set_hdr(size_dt_struct);
+#undef __fdt_set_hdr
+
+/**
+ * fdt_check_header - sanity check a device tree or possible device tree
+ * @fdt: pointer to data which might be a flattened device tree
+ *
+ * fdt_check_header() checks that the given buffer contains what
+ * appears to be a flattened device tree with sane information in its
+ * header.
+ *
+ * returns:
+ *     0, if the buffer appears to contain a valid device tree
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings, as above
+ */
+int fdt_check_header(const void *fdt);
+
+/**
+ * fdt_move - move a device tree around in memory
+ * @fdt: pointer to the device tree to move
+ * @buf: pointer to memory where the device is to be moved
+ * @bufsize: size of the memory space at buf
+ *
+ * fdt_move() relocates, if possible, the device tree blob located at
+ * fdt to the buffer at buf of size bufsize.  The buffer may overlap
+ * with the existing device tree blob at fdt.  Therefore,
+ *     fdt_move(fdt, fdt, fdt_totalsize(fdt))
+ * should always succeed.
+ *
+ * returns:
+ *     0, on success
+ *     -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_move(const void *fdt, void *buf, int bufsize);
+
+/**********************************************************************/
+/* Read-only functions                                                */
+/**********************************************************************/
+
+/**
+ * fdt_string - retreive a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ *
+ * fdt_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt.
+ *
+ * returns:
+ *     a pointer to the string, on success
+ *     NULL, if stroffset is out of bounds
+ */
+const char *fdt_string(const void *fdt, int stroffset);
+
+/**
+ * fdt_num_mem_rsv - retreive the number of memory reserve map entries
+ * @fdt: pointer to the device tree blob
+ *
+ * Returns the number of entries in the device tree blob's memory
+ * reservation map.  This does not include the terminating 0,0 entry
+ * or any other (0,0) entries reserved for expansion.
+ *
+ * returns:
+ *     the number of entries
+ */
+int fdt_num_mem_rsv(const void *fdt);
+
+/**
+ * fdt_get_mem_rsv - retreive one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: pointers to 64-bit variables
+ *
+ * On success, *address and *size will contain the address and size of
+ * the n-th reserve map entry from the device tree blob, in
+ * native-endian format.
+ *
+ * returns:
+ *     0, on success
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
+
+/**
+ * fdt_subnode_offset_namelen - find a subnode based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_subnode_offset(), but only examine the first
+ * namelen characters of name for matching the subnode name.  This is
+ * useful for finding subnodes based on a portion of a larger string,
+ * such as a full path.
+ */
+int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+                              const char *name, int namelen);
+/**
+ * fdt_subnode_offset - find a subnode of a given node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_subnode_offset() finds a subnode of the node at structure block
+ * offset parentoffset with the given name.  name may include a unit
+ * address, in which case fdt_subnode_offset() will find the subnode
+ * with that unit address, or the unit address may be omitted, in
+ * which case fdt_subnode_offset() will find an arbitrary subnode
+ * whose name excluding unit address matches the given name.
+ *
+ * returns:
+ *     structure block offset of the requested subnode (>=0), on success
+ *     -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ *     -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ *      -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE,
+ *     -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_path_offset - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ *
+ * fdt_path_offset() finds a node of a given path in the device tree.
+ * Each path component may omit the unit address portion, but the
+ * results of this are undefined if any such path component is
+ * ambiguous (that is if there are multiple nodes at the relevant
+ * level matching the given component, differentiated only by unit
+ * address).
+ *
+ * returns:
+ *     structure block offset of the node with the requested path (>=0), on success
+ *     -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
+ *     -FDT_ERR_NOTFOUND, if the requested node does not exist
+ *      -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE,
+ *     -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_path_offset(const void *fdt, const char *path);
+
+/**
+ * fdt_get_name - retreive the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the starting node
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_name() retrieves the name (including unit address) of the
+ * device tree node at structure block offset nodeoffset.  If lenp is
+ * non-NULL, the length of this name is also returned, in the integer
+ * pointed to by lenp.
+ *
+ * returns:
+ *     pointer to the node's name, on success
+ *             If lenp is non-NULL, *lenp contains the length of that name (>=0)
+ *     NULL, on error
+ *             if lenp is non-NULL *lenp contains an error code (<0):
+ *             -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *             -FDT_ERR_BADMAGIC,
+ *             -FDT_ERR_BADVERSION,
+ *             -FDT_ERR_BADSTATE, standard meanings
+ */
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
+
+/**
+ * fdt_get_property - find a given property in a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property() retrieves a pointer to the fdt_property
+ * structure within the device tree blob corresponding to the property
+ * named 'name' of the node at offset nodeoffset.  If lenp is
+ * non-NULL, the length of the property value also returned, in the
+ * integer pointed to by lenp.
+ *
+ * returns:
+ *     pointer to the structure representing the property
+ *             if lenp is non-NULL, *lenp contains the length of the property
+ *             value (>=0)
+ *     NULL, on error
+ *             if lenp is non-NULL, *lenp contains an error code (<0):
+ *             -FDT_ERR_NOTFOUND, node does not have named property
+ *             -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *             -FDT_ERR_BADMAGIC,
+ *             -FDT_ERR_BADVERSION,
+ *             -FDT_ERR_BADSTATE,
+ *             -FDT_ERR_BADSTRUCTURE,
+ *             -FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
+                                           const char *name, int *lenp);
+static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
+                                                     const char *name,
+                                                     int *lenp)
+{
+       return (struct fdt_property *)fdt_get_property(fdt, nodeoffset,
+                                                      name, lenp);
+}
+
+/**
+ * fdt_getprop - retrieve the value of a given property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop() retrieves a pointer to the value of the property
+ * named 'name' of the node at offset nodeoffset (this will be a
+ * pointer to within the device blob itself, not a copy of the value).
+ * If lenp is non-NULL, the length of the property value also
+ * returned, in the integer pointed to by lenp.
+ *
+ * returns:
+ *     pointer to the property's value
+ *             if lenp is non-NULL, *lenp contains the length of the property
+ *             value (>=0)
+ *     NULL, on error
+ *             if lenp is non-NULL, *lenp contains an error code (<0):
+ *             -FDT_ERR_NOTFOUND, node does not have named property
+ *             -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *             -FDT_ERR_BADMAGIC,
+ *             -FDT_ERR_BADVERSION,
+ *             -FDT_ERR_BADSTATE,
+ *             -FDT_ERR_BADSTRUCTURE,
+ *             -FDT_ERR_TRUNCATED, standard meanings
+ */
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+                       const char *name, int *lenp);
+static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
+                                 const char *name, int *lenp)
+{
+       return (void *)fdt_getprop(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_get_phandle - retreive the phandle of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the node
+ *
+ * fdt_get_phandle() retrieves the phandle of the device tree node at
+ * structure block offset nodeoffset.
+ *
+ * returns:
+ *     the phandle of the node at nodeoffset, on succes (!= 0, != -1)
+ *     0, if the node has no phandle, or another error occurs
+ */
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_get_path - determine the full path of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose path to find
+ * @buf: character buffer to contain the returned path (will be overwritten)
+ * @buflen: size of the character buffer at buf
+ *
+ * fdt_get_path() computes the full path of the node at offset
+ * nodeoffset, and records that path in the buffer at buf.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ *     0, on success
+ *             buf contains the absolute path of the node at
+ *             nodeoffset, as a NUL-terminated string.
+ *     -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *     -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
+ *             characters and will not fit in the given buffer.
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
+
+/**
+ * fdt_supernode_atdepth_offset - find a specific ancestor of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ * @supernodedepth: depth of the ancestor to find
+ * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_supernode_atdepth_offset() finds an ancestor of the given node
+ * at a specific depth from the root (where the root itself has depth
+ * 0, its immediate subnodes depth 1 and so forth).  So
+ *     fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
+ * will always return 0, the offset of the root node.  If the node at
+ * nodeoffset has depth D, then:
+ *     fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
+ * will return nodeoffset itself.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+
+ *     structure block offset of the node at node offset's ancestor
+ *             of depth supernodedepth (>=0), on success
+ *     -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+*      -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+                                int supernodedepth, int *nodedepth);
+
+/**
+ * fdt_node_depth - find the depth of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_node_depth() finds the depth of a given node.  The root node
+ * has depth 0, its immediate subnodes depth 1 and so forth.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ *     depth of the node at nodeoffset (>=0), on success
+ *     -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_depth(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_parent_offset - find the parent of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_parent_offset() locates the parent node of a given node (that
+ * is, it finds the offset of the node which contains the node at
+ * nodeoffset as a subnode).
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset, *twice*.
+ *
+ * returns:
+ *     stucture block offset of the parent of the node at nodeoffset
+ *             (>=0), on success
+ *     -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_parent_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_node_offset_by_prop_value - find nodes with a given property value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @propname: property name to check
+ * @propval: property value to search for
+ * @proplen: length of the value in propval
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the first
+ * node after startoffset, which has a property named propname whose
+ * value is of length proplen and has value equal to propval; or if
+ * startoffset is -1, the very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ *     offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
+ *                                            propval, proplen);
+ *     while (offset != -FDT_ERR_NOTFOUND) {
+ *             // other code here
+ *             offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
+ *                                                    propval, proplen);
+ *     }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ *     structure block offset of the located node (>= 0, >startoffset),
+ *              on success
+ *     -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ *             tree after startoffset
+ *     -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+                                 const char *propname,
+                                 const void *propval, int proplen);
+
+/**
+ * fdt_node_offset_by_phandle - find the node with a given phandle
+ * @fdt: pointer to the device tree blob
+ * @phandle: phandle value
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the node
+ * which has the given phandle value.  If there is more than one node
+ * in the tree with the given phandle (an invalid tree), results are
+ * undefined.
+ *
+ * returns:
+ *     structure block offset of the located node (>= 0), on success
+ *     -FDT_ERR_NOTFOUND, no node with that phandle exists
+ *     -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
+
+/**
+ * fdt_node_check_compatible: check a node's compatible property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @compatible: string to match against
+ *
+ *
+ * fdt_node_check_compatible() returns 0 if the given node contains a
+ * 'compatible' property with the given string as one of its elements,
+ * it returns non-zero otherwise, or on error.
+ *
+ * returns:
+ *     0, if the node has a 'compatible' property listing the given string
+ *     1, if the node has a 'compatible' property, but it does not list
+ *             the given string
+ *     -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
+ *     -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+                             const char *compatible);
+
+/**
+ * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @compatible: 'compatible' string to match against
+ *
+ * fdt_node_offset_by_compatible() returns the offset of the first
+ * node after startoffset, which has a 'compatible' property which
+ * lists the given compatible string; or if startoffset is -1, the
+ * very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ *     offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
+ *     while (offset != -FDT_ERR_NOTFOUND) {
+ *             // other code here
+ *             offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
+ *     }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ *     structure block offset of the located node (>= 0, >startoffset),
+ *              on success
+ *     -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ *             tree after startoffset
+ *     -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *     -FDT_ERR_BADMAGIC,
+ *     -FDT_ERR_BADVERSION,
+ *     -FDT_ERR_BADSTATE,
+ *     -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+                                 const char *compatible);
+
+/**********************************************************************/
+/* Write-in-place functions                                           */
+/**********************************************************************/
+
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+                       const void *val, int len);
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+                                          const char *name, uint32_t val)
+{
+       val = cpu_to_fdt32(val);
+       return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+int fdt_nop_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Sequential write functions                                         */
+/**********************************************************************/
+
+int fdt_create(void *buf, int bufsize);
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
+int fdt_finish_reservemap(void *fdt);
+int fdt_begin_node(void *fdt, const char *name);
+int fdt_property(void *fdt, const char *name, const void *val, int len);
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+       val = cpu_to_fdt32(val);
+       return fdt_property(fdt, name, &val, sizeof(val));
+}
+#define fdt_property_string(fdt, name, str) \
+       fdt_property(fdt, name, str, strlen(str)+1)
+int fdt_end_node(void *fdt);
+int fdt_finish(void *fdt);
+
+/**********************************************************************/
+/* Read-write functions                                               */
+/**********************************************************************/
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize);
+int fdt_pack(void *fdt);
+
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+int fdt_del_mem_rsv(void *fdt, int n);
+
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+               const void *val, int len);
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+                                  uint32_t val)
+{
+       val = cpu_to_fdt32(val);
+       return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+#define fdt_setprop_string(fdt, nodeoffset, name, str) \
+       fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+                           const char *name, int namelen);
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+int fdt_del_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Debugging / informational functions                                */
+/**********************************************************************/
+
+const char *fdt_strerror(int errval);
+
+#endif /* _LIBFDT_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt/libfdt_internal.h powerpc.git/arch/powerpc/boot/libfdt/libfdt_internal.h
--- linux-2.6.24/arch/powerpc/boot/libfdt/libfdt_internal.h     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt/libfdt_internal.h      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,89 @@
+#ifndef _LIBFDT_INTERNAL_H
+#define _LIBFDT_INTERNAL_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <fdt.h>
+
+#define ALIGN(x, a)    (((x) + (a) - 1) & ~((a) - 1))
+#define PALIGN(p, a)   ((void *)ALIGN((unsigned long)(p), (a)))
+
+#define memeq(p, q, n) (memcmp((p), (q), (n)) == 0)
+#define streq(p, q)    (strcmp((p), (q)) == 0)
+
+uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
+const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
+int _fdt_node_end_offset(void *fdt, int nodeoffset);
+
+static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
+{
+       return fdt + fdt_off_dt_struct(fdt) + offset;
+}
+
+static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
+{
+       return (void *)_fdt_offset_ptr(fdt, offset);
+}
+
+static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
+{
+       const struct fdt_reserve_entry *rsv_table =
+               fdt + fdt_off_mem_rsvmap(fdt);
+
+       return rsv_table + n;
+}
+static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
+{
+       return (void *)_fdt_mem_rsv(fdt, n);
+}
+
+#define SW_MAGIC               (~FDT_MAGIC)
+
+#endif /* _LIBFDT_INTERNAL_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt-wrapper.c powerpc.git/arch/powerpc/boot/libfdt-wrapper.c
--- linux-2.6.24/arch/powerpc/boot/libfdt-wrapper.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt-wrapper.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,184 @@
+/*
+ * This file does the necessary interface mapping between the bootwrapper
+ * device tree operations and the interface provided by shared source
+ * files flatdevicetree.[ch].
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <stddef.h>
+#include <stdio.h>
+#include <page.h>
+#include <libfdt.h>
+#include "ops.h"
+
+#define DEBUG  0
+#define BAD_ERROR(err) (((err) < 0) \
+                        && ((err) != -FDT_ERR_NOTFOUND) \
+                        && ((err) != -FDT_ERR_EXISTS))
+
+#define check_err(err) \
+       ({ \
+               if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \
+                       printf("%s():%d  %s\n\r", __FUNCTION__, __LINE__, \
+                              fdt_strerror(err)); \
+               if (BAD_ERROR(err)) \
+                       exit(); \
+               (err < 0) ? -1 : 0; \
+       })
+
+#define offset_devp(off)       \
+       ({ \
+               int _offset = (off); \
+               check_err(_offset) ? NULL : (void *)(_offset+1); \
+       })
+
+#define devp_offset_find(devp) (((int)(devp))-1)
+#define devp_offset(devp)      (devp ? ((int)(devp))-1 : 0)
+
+static void *fdt;
+static void *buf; /* = NULL */
+
+#define EXPAND_GRANULARITY     1024
+
+static void expand_buf(int minexpand)
+{
+       int size = fdt_totalsize(fdt);
+       int rc;
+
+       size = _ALIGN(size + minexpand, EXPAND_GRANULARITY);
+       buf = platform_ops.realloc(buf, size);
+       if (!buf)
+               fatal("Couldn't find %d bytes to expand device tree\n\r", size);
+       rc = fdt_open_into(fdt, buf, size);
+       if (rc != 0)
+               fatal("Couldn't expand fdt into new buffer: %s\n\r",
+                     fdt_strerror(rc));
+
+       fdt = buf;
+}
+
+static void *fdt_wrapper_finddevice(const char *path)
+{
+       return offset_devp(fdt_path_offset(fdt, path));
+}
+
+static int fdt_wrapper_getprop(const void *devp, const char *name,
+                              void *buf, const int buflen)
+{
+       const void *p;
+       int len;
+
+       p = fdt_getprop(fdt, devp_offset(devp), name, &len);
+       if (!p)
+               return check_err(len);
+       memcpy(buf, p, min(len, buflen));
+       return len;
+}
+
+static int fdt_wrapper_setprop(const void *devp, const char *name,
+                              const void *buf, const int len)
+{
+       int rc;
+
+       rc = fdt_setprop(fdt, devp_offset(devp), name, buf, len);
+       if (rc == -FDT_ERR_NOSPACE) {
+               expand_buf(len + 16);
+               rc = fdt_setprop(fdt, devp_offset(devp), name, buf, len);
+       }
+
+       return check_err(rc);
+}
+
+static void *fdt_wrapper_get_parent(const void *devp)
+{
+       return offset_devp(fdt_parent_offset(fdt, devp_offset(devp)));
+}
+
+static void *fdt_wrapper_create_node(const void *devp, const char *name)
+{
+       int offset;
+
+       offset = fdt_add_subnode(fdt, devp_offset(devp), name);
+       if (offset == -FDT_ERR_NOSPACE) {
+               expand_buf(strlen(name) + 16);
+               offset = fdt_add_subnode(fdt, devp_offset(devp), name);
+       }
+
+       return offset_devp(offset);
+}
+
+static void *fdt_wrapper_find_node_by_prop_value(const void *prev,
+                                                const char *name,
+                                                const char *val,
+                                                int len)
+{
+       int offset = fdt_node_offset_by_prop_value(fdt, devp_offset_find(prev),
+                                                  name, val, len);
+       return offset_devp(offset);
+}
+
+static char *fdt_wrapper_get_path(const void *devp, char *buf, int len)
+{
+       int rc;
+
+       rc = fdt_get_path(fdt, devp_offset(devp), buf, len);
+       if (check_err(rc))
+               return NULL;
+       return buf;
+}
+
+static unsigned long fdt_wrapper_finalize(void)
+{
+       int rc;
+
+       rc = fdt_pack(fdt);
+       if (rc != 0)
+               fatal("Couldn't pack flat tree: %s\n\r",
+                     fdt_strerror(rc));
+       return (unsigned long)fdt;
+}
+
+void fdt_init(void *blob)
+{
+       int err;
+
+       dt_ops.finddevice = fdt_wrapper_finddevice;
+       dt_ops.getprop = fdt_wrapper_getprop;
+       dt_ops.setprop = fdt_wrapper_setprop;
+       dt_ops.get_parent = fdt_wrapper_get_parent;
+       dt_ops.create_node = fdt_wrapper_create_node;
+       dt_ops.find_node_by_prop_value = fdt_wrapper_find_node_by_prop_value;
+       dt_ops.get_path = fdt_wrapper_get_path;
+       dt_ops.finalize = fdt_wrapper_finalize;
+
+       /* Make sure the dt blob is the right version and so forth */
+       fdt = blob;
+       err = fdt_open_into(fdt, fdt, fdt_totalsize(blob));
+       if (err == -FDT_ERR_NOSPACE) {
+               int bufsize = fdt_totalsize(fdt) + 4;
+               buf = malloc(bufsize);
+               err = fdt_open_into(fdt, buf, bufsize);
+       }
+
+       if (err != 0)
+               fatal("fdt_init(): %s\n\r", fdt_strerror(err));
+
+       if (buf)
+               fdt = buf;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/libfdt_env.h powerpc.git/arch/powerpc/boot/libfdt_env.h
--- linux-2.6.24/arch/powerpc/boot/libfdt_env.h 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/libfdt_env.h  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,17 @@
+#ifndef _ARCH_POWERPC_BOOT_LIBFDT_ENV_H
+#define _ARCH_POWERPC_BOOT_LIBFDT_ENV_H
+
+#include <types.h>
+#include <string.h>
+
+typedef u32 uint32_t;
+typedef u64 uint64_t;
+
+#define fdt16_to_cpu(x)                (x)
+#define cpu_to_fdt16(x)                (x)
+#define fdt32_to_cpu(x)                (x)
+#define cpu_to_fdt32(x)                (x)
+#define fdt64_to_cpu(x)                (x)
+#define cpu_to_fdt64(x)                (x)
+
+#endif /* _ARCH_POWERPC_BOOT_LIBFDT_ENV_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/main.c powerpc.git/arch/powerpc/boot/main.c
--- linux-2.6.24/arch/powerpc/boot/main.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/main.c        2008-01-28 20:25:49.000000000 +0100
@@ -16,7 +16,6 @@
 #include "stdio.h"
 #include "ops.h"
 #include "gunzip_util.h"
-#include "flatdevtree.h"
 #include "reg.h"
 
 static struct gunzip_state gzstate;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/ops.h powerpc.git/arch/powerpc/boot/ops.h
--- linux-2.6.24/arch/powerpc/boot/ops.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/ops.h 2008-01-28 20:25:49.000000000 +0100
@@ -79,7 +79,7 @@
 extern struct loader_info loader_info;
 
 void start(void);
-int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device);
+void fdt_init(void *blob);
 int serial_console_init(void);
 int ns16550_console_init(void *devp, struct serial_console_data *scdp);
 int mpsc_console_init(void *devp, struct serial_console_data *scdp);
@@ -159,9 +159,23 @@
        return find_node_by_prop_value_str(prev, "device_type", type);
 }
 
+static inline void *find_node_by_alias(const char *alias)
+{
+       void *devp = finddevice("/aliases");
+
+       if (devp) {
+               char path[MAX_PATH_LEN];
+               if (getprop(devp, alias, path, MAX_PATH_LEN) > 0)
+                       return finddevice(path);
+       }
+
+       return NULL;
+}
+
 void dt_fixup_memory(u64 start, u64 size);
 void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq);
 void dt_fixup_clock(const char *path, u32 freq);
+void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr);
 void dt_fixup_mac_address(u32 index, const u8 *addr);
 void __dt_fixup_mac_addresses(u32 startindex, ...);
 #define dt_fixup_mac_addresses(...) \
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/prpmc2800.c powerpc.git/arch/powerpc/boot/prpmc2800.c
--- linux-2.6.24/arch/powerpc/boot/prpmc2800.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/prpmc2800.c   2008-01-28 20:25:49.000000000 +0100
@@ -547,8 +547,7 @@
        if (!dtb)
                exit();
        memmove(dtb, _dtb_start, dt_size);
-       if (ft_init(dtb, dt_size, 16))
-               exit();
+       fdt_init(dtb);
 
        bridge_base = mv64x60_get_bridge_base();
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/ps3.c powerpc.git/arch/powerpc/boot/ps3.c
--- linux-2.6.24/arch/powerpc/boot/ps3.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/ps3.c 2008-01-28 20:25:49.000000000 +0100
@@ -131,7 +131,7 @@
        printf("\n-- PS3 bootwrapper --\n");
 
        simple_alloc_init(_end, heapsize, 32, 64);
-       ft_init(_dtb_start, 0, 4);
+       fdt_init(_dtb_start);
 
        chosen = finddevice("/chosen");
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/redboot-8xx.c powerpc.git/arch/powerpc/boot/redboot-8xx.c
--- linux-2.6.24/arch/powerpc/boot/redboot-8xx.c        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/redboot-8xx.c 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,58 @@
+/*
+ * RedBoot firmware support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "redboot.h"
+#include "fsl-soc.h"
+#include "io.h"
+
+static bd_t bd;
+BSS_STACK(4096);
+
+#define MHZ(x) ((x + 500000) / 1000000)
+
+static void platform_fixups(void)
+{
+       void *node;
+
+       dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+       dt_fixup_mac_addresses(bd.bi_enetaddr);
+       dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
+
+       node = finddevice("/soc/cpm/brg");
+       if (node) {
+               printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
+                      bd.bi_busfreq, MHZ(bd.bi_busfreq));
+               setprop(node, "clock-frequency",  &bd.bi_busfreq, 4);
+       }
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+       memcpy(&bd, (char *)r3, sizeof(bd));
+
+       if (bd.bi_tag != 0x42444944)
+               return;
+
+       simple_alloc_init(_end,
+                         bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
+                         32, 64);
+
+       fdt_init(_dtb_start);
+       serial_console_init();
+       platform_ops.fixups = platform_fixups;
+
+       loader_info.cmdline = (char *)bd.bi_cmdline;
+       loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/redboot.h powerpc.git/arch/powerpc/boot/redboot.h
--- linux-2.6.24/arch/powerpc/boot/redboot.h    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/redboot.h     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,56 @@
+#ifndef _PPC_REDBOOT_H
+#define _PPC_REDBOOT_H
+
+//=========================================================================
+// include/asm-ppc/redboot.h
+//   Copyright (c) 2002, 2003 Gary Thomas (<gary@mlbassoc.com>
+//   Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+
+//
+// Board specific details, as provided by RedBoot
+//
+
+/* A Board Information structure that is given to a program when
+ * RedBoot starts it up.  Note: not all fields make sense for all
+ * architectures and it's up to the platform specific code to fill
+ * in the details.
+ */
+typedef struct bd_info {
+    unsigned int   bi_tag;        /* Should be 0x42444944 "BDID" */
+    unsigned int   bi_size;       /* Size of this structure */
+    unsigned int   bi_revision;   /* revision of this structure */
+    unsigned int   bi_bdate;      /* bootstrap date, i.e. 0x19971106 */
+    unsigned int   bi_memstart;   /* Memory start address */
+    unsigned int   bi_memsize;    /* Memory (end) size in bytes */
+    unsigned int   bi_intfreq;    /* Internal Freq, in Hz */
+    unsigned int   bi_busfreq;    /* Bus Freq, in Hz */
+    unsigned int   bi_cpmfreq;    /* CPM Freq, in Hz */
+    unsigned int   bi_brgfreq;    /* BRG Freq, in Hz */
+    unsigned int   bi_vco;        /* VCO Out from PLL */
+    unsigned int   bi_pci_freq;   /* PCI Freq, in Hz */
+    unsigned int   bi_baudrate;   /* Default console baud rate */
+    unsigned int   bi_immr;       /* IMMR when called from boot rom */
+    unsigned char  bi_enetaddr[6];
+    unsigned int   bi_flashbase;  /* Physical address of FLASH memory */
+    unsigned int   bi_flashsize;  /* Length of FLASH memory */
+    int            bi_flashwidth; /* Width (8,16,32,64) */
+    unsigned char *bi_cmdline;    /* Pointer to command line */
+    unsigned char  bi_esa[3][6];  /* Ethernet station addresses */
+    unsigned int   bi_ramdisk_begin, bi_ramdisk_end;
+    struct {                      /* Information about [main] video screen */
+        short x_res;              /*   Horizontal resolution in pixels */
+        short y_res;              /*   Vertical resolution in pixels */
+        short bpp;                /*   Bits/pixel */
+        short mode;               /*   Type of pixels (packed, indexed) */
+        unsigned long fb;         /*   Pointer to frame buffer (pixel) memory */
+    } bi_video;
+    void         (*bi_cputc)(char);   /* Write a character to the RedBoot console */
+    char         (*bi_cgetc)(void);   /* Read a character from the RedBoot console */
+    int          (*bi_ctstc)(void);   /* Test for input on the RedBoot console */
+} bd_t;
+
+#define BI_REV 0x0102    /* Version 1.02 */
+
+#define bi_pci_busfreq bi_pci_freq
+#define bi_immr_base   bi_immr
+#endif
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/reg.h powerpc.git/arch/powerpc/boot/reg.h
--- linux-2.6.24/arch/powerpc/boot/reg.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/reg.h 2008-01-28 20:25:49.000000000 +0100
@@ -16,6 +16,14 @@
        return pvr;
 }
 
+#define __stringify_1(x)       #x
+#define __stringify(x)         __stringify_1(x)
+
+#define mfspr(rn)      ({unsigned long rval; \
+                       asm volatile("mfspr %0," __stringify(rn) \
+                               : "=r" (rval)); rval; })
+#define mtspr(rn, v)   asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
 register void *__stack_pointer asm("r1");
 #define get_sp()       (__stack_pointer)
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/serial.c powerpc.git/arch/powerpc/boot/serial.c
--- linux-2.6.24/arch/powerpc/boot/serial.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/serial.c      2008-01-28 20:25:49.000000000 +0100
@@ -128,7 +128,8 @@
                rc = cpm_console_init(devp, &serial_cd);
        else if (dt_is_compatible(devp, "mpc5200-psc-uart"))
                rc = mpc5200_psc_console_init(devp, &serial_cd);
-       else if (dt_is_compatible(devp, "xilinx,uartlite"))
+       else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
+                dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
                rc = uartlite_console_init(devp, &serial_cd);
 
        /* Add other serial console driver calls here */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/treeboot-walnut.c powerpc.git/arch/powerpc/boot/treeboot-walnut.c
--- linux-2.6.24/arch/powerpc/boot/treeboot-walnut.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/treeboot-walnut.c     2008-01-28 20:25:49.000000000 +0100
@@ -20,55 +20,6 @@
 
 BSS_STACK(4096);
 
-void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
-{
-       u32 pllmr = mfdcr(DCRN_CPC0_PLLMR);
-       u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0);
-       u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1);
-       u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
-       u32 fwdv, fbdv, cbdv, opdv, epdv, udiv;
-
-       fwdv = (8 - ((pllmr & 0xe0000000) >> 29));
-       fbdv = (pllmr & 0x1e000000) >> 25;
-       cbdv = ((pllmr & 0x00060000) >> 17) + 1;
-       opdv = ((pllmr & 0x00018000) >> 15) + 1;
-       epdv = ((pllmr & 0x00001800) >> 13) + 2;
-       udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
-
-       m = fwdv * fbdv * cbdv;
-
-       cpu = sysclk * m / fwdv;
-       plb = cpu / cbdv;
-       opb = plb / opdv;
-       ebc = plb / epdv;
-
-       if (cpc0_cr0 & 0x80) {
-               /* uart0 uses the external clock */
-               uart0 = ser_clk;
-       } else {
-               uart0 = cpu / udiv;
-       }
-
-       if (cpc0_cr0 & 0x40) {
-               /* uart1 uses the external clock */
-               uart1 = ser_clk;
-       } else {
-               uart1 = cpu / udiv;
-       }
-
-       /* setup the timebase clock to tick at the cpu frequency */
-       cpc0_cr1 = cpc0_cr1 & ~0x00800000;
-       mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1);
-       tb = cpu;
-
-       dt_fixup_cpu_clocks(cpu, tb, 0);
-       dt_fixup_clock("/plb", plb);
-       dt_fixup_clock("/plb/opb", opb);
-       dt_fixup_clock("/plb/ebc", ebc);
-       dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
-       dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
-}
-
 static void walnut_flashsel_fixup(void)
 {
        void *devp, *sram;
@@ -112,7 +63,7 @@
 #define WALNUT_OPENBIOS_MAC_OFF 0xfffffe0b
 static void walnut_fixups(void)
 {
-       ibm4xx_fixup_memsize();
+       ibm4xx_sdram_fixup_memsize();
        ibm405gp_fixup_clocks(33330000, 0xa8c000);
        ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
        ibm4xx_fixup_ebc_ranges("/plb/ebc");
@@ -128,6 +79,6 @@
        simple_alloc_init(_end, avail_ram, 32, 32);
        platform_ops.fixups = walnut_fixups;
        platform_ops.exit = ibm40x_dbcr_reset;
-       ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+       fdt_init(_dtb_start);
        serial_console_init();
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/boot/wrapper powerpc.git/arch/powerpc/boot/wrapper
--- linux-2.6.24/arch/powerpc/boot/wrapper      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/boot/wrapper       2008-01-28 20:25:49.000000000 +0100
@@ -45,6 +45,7 @@
 
 # directory for object and other files used by this script
 object=arch/powerpc/boot
+objbin=$object
 
 # directory for working files
 tmpdir=.
@@ -95,6 +96,7 @@
        shift
        [ "$#" -gt 0 ] || usage
        object="$1"
+       objbin="$1"
        ;;
     -W)
        shift
@@ -116,10 +118,13 @@
 done
 
 if [ -n "$dts" ]; then
+    if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then
+       dts="$object/dts/$dts"
+    fi
     if [ -z "$dtb" ]; then
        dtb="$platform.dtb"
     fi
-    dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts"
+    $object/dtc -O dtb -o "$dtb" -b 0 "$dts"
 fi
 
 if [ -z "$kernel" ]; then
@@ -163,7 +168,7 @@
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     ;;
-ep88xc)
+ep88xc|ep405|redboot*|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
     binary=y
     ;;
@@ -246,11 +251,11 @@
 # post-processing needed for some platforms
 case "$platform" in
 pseries|chrp)
-    $object/addnote "$ofile"
+    $objbin/addnote "$ofile"
     ;;
 coff)
     ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
-    $object/hack-coff "$ofile"
+    $objbin/hack-coff "$ofile"
     ;;
 cuboot*)
     gzip -f -9 "$ofile"
@@ -259,7 +264,7 @@
     ;;
 treeboot*)
     mv "$ofile" "$ofile.elf"
-    $object/mktree "$ofile.elf" "$ofile" "$base" "$entry"
+    $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry"
     if [ -z "$cacheit" ]; then
        rm -f "$ofile.elf"
     fi
@@ -287,8 +292,6 @@
     overlay_dest="256"
     overlay_size="256"
 
-    rm -f "$object/otheros.bld"
-
     ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
 
     dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
@@ -299,6 +302,8 @@
         skip=$system_reset_overlay seek=$overlay_dest \
         count=$overlay_size bs=1
 
-    gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld"
+    odir="$(dirname "$ofile.bin")"
+    rm -f "$odir/otheros.bld"
+    gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
     ;;
 esac
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/adder875-redboot_defconfig powerpc.git/arch/powerpc/configs/adder875-redboot_defconfig
--- linux-2.6.24/arch/powerpc/configs/adder875-redboot_defconfig        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/adder875-redboot_defconfig 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,798 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Thu Jan 17 16:17:38 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_8xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_8xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_REDBOOT=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_CPM1=y
+# CONFIG_MPC8XXFADS is not set
+# CONFIG_MPC86XADS is not set
+# CONFIG_MPC885ADS is not set
+# CONFIG_PPC_EP88XC is not set
+CONFIG_PPC_ADDER875=y
+
+#
+# MPC8xx CPM Options
+#
+
+#
+# Generic MPC8xx Options
+#
+CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_CPU6 is not set
+CONFIG_8xx_CPU15=y
+CONFIG_NO_UCODE_PATCH=y
+# CONFIG_USB_SOF_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_8XX_MINIMAL_FPEMU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="adder875-redboot.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCI_QSPAN is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xfd000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_CFI_FLAGADM is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/adder875-uboot_defconfig powerpc.git/arch/powerpc/configs/adder875-uboot_defconfig
--- linux-2.6.24/arch/powerpc/configs/adder875-uboot_defconfig  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/adder875-uboot_defconfig   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,798 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Thu Jan 17 16:17:18 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_8xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_8xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_REDBOOT=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_CPM1=y
+# CONFIG_MPC8XXFADS is not set
+# CONFIG_MPC86XADS is not set
+# CONFIG_MPC885ADS is not set
+# CONFIG_PPC_EP88XC is not set
+CONFIG_PPC_ADDER875=y
+
+#
+# MPC8xx CPM Options
+#
+
+#
+# Generic MPC8xx Options
+#
+CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_CPU6 is not set
+CONFIG_8xx_CPU15=y
+CONFIG_NO_UCODE_PATCH=y
+# CONFIG_USB_SOF_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_8XX_MINIMAL_FPEMU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="adder875-uboot.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCI_QSPAN is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xfd000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_CFI_FLAGADM is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/bamboo_defconfig powerpc.git/arch/powerpc/configs/bamboo_defconfig
--- linux-2.6.24/arch/powerpc/configs/bamboo_defconfig  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/bamboo_defconfig   2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:04 2007
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 10:49:50 2007
 #
 # CONFIG_PPC64 is not set
 
@@ -131,6 +131,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
@@ -143,6 +144,9 @@
 CONFIG_BAMBOO=y
 # CONFIG_EBONY is not set
 # CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_MPIC is not set
@@ -372,9 +376,7 @@
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
@@ -736,19 +738,7 @@
 # CONFIG_KGDB is not set
 # CONFIG_XMON is not set
 # CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-CONFIG_PPC_EARLY_DEBUG_44x=y
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x0
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/celleb_defconfig powerpc.git/arch/powerpc/configs/celleb_defconfig
--- linux-2.6.24/arch/powerpc/configs/celleb_defconfig  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/celleb_defconfig   2008-01-28 20:25:49.000000000 +0100
@@ -50,7 +50,8 @@
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR_MMIO=y
+CONFIG_PPC_DCR=y
 CONFIG_PPC_OF_PLATFORM_PCI=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -148,7 +149,7 @@
 CONFIG_PPC_CELLEB=y
 # CONFIG_PPC_PS3 is not set
 CONFIG_PPC_CELL=y
-# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_CELL_NATIVE=y
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 
 #
@@ -157,13 +158,19 @@
 CONFIG_SPU_FS=y
 CONFIG_SPU_FS_64K_LS=y
 CONFIG_SPU_BASE=y
+CONFIG_CBE_RAS=y
+# CONFIG_CBE_THERM is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_PPC_NATIVE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_PPC_UDBG_BEAT=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_U3_DART is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+# CONFIG_RTAS_PROC is not set
 # CONFIG_MMIO_NVRAM is not set
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
@@ -593,10 +600,11 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
@@ -741,6 +749,7 @@
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -822,6 +831,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -1245,17 +1255,7 @@
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-CONFIG_PPC_EARLY_DEBUG_BEAT=y
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/ebony_defconfig powerpc.git/arch/powerpc/configs/ebony_defconfig
--- linux-2.6.24/arch/powerpc/configs/ebony_defconfig   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/ebony_defconfig    2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:11 2007
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:16:26 2007
 #
 # CONFIG_PPC64 is not set
 
@@ -130,6 +130,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
@@ -142,6 +143,9 @@
 # CONFIG_BAMBOO is not set
 CONFIG_EBONY=y
 # CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
 CONFIG_440GP=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/ep405_defconfig powerpc.git/arch/powerpc/configs/ep405_defconfig
--- linux-2.6.24/arch/powerpc/configs/ep405_defconfig   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/ep405_defconfig    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,952 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:17:13 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EP405=y
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+CONFIG_405GP=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="ep405.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/ep8248e_defconfig powerpc.git/arch/powerpc/configs/ep8248e_defconfig
--- linux-2.6.24/arch/powerpc/configs/ep8248e_defconfig 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/ep8248e_defconfig  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,821 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Fri Jan 11 14:02:06 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+CONFIG_PPC_82xx=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_MPC8272_ADS is not set
+# CONFIG_PQ2FADS is not set
+CONFIG_EP8248E=y
+# CONFIG_PQ2ADS is not set
+CONFIG_8260=y
+CONFIG_8272=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="ep8248e.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+CONFIG_SERIAL_CPM_SCC4=y
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/katmai_defconfig powerpc.git/arch/powerpc/configs/katmai_defconfig
--- linux-2.6.24/arch/powerpc/configs/katmai_defconfig  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/katmai_defconfig   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,790 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:17:43 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+CONFIG_KATMAI=y
+# CONFIG_RAINIER is not set
+CONFIG_440SPe=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="katmai.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/kilauea_defconfig powerpc.git/arch/powerpc/configs/kilauea_defconfig
--- linux-2.6.24/arch/powerpc/configs/kilauea_defconfig 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/kilauea_defconfig  2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:20 2007
+# Linux kernel version: 2.6.24-rc6
+# Thu Jan  3 14:21:31 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -40,7 +40,7 @@
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
@@ -125,6 +125,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
@@ -134,9 +135,12 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_EP405 is not set
 CONFIG_KILAUEA=y
+# CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
 # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+CONFIG_405EX=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -199,11 +203,17 @@
 # Bus options
 #
 CONFIG_ZONE_DMA=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Advanced setup
@@ -368,11 +378,13 @@
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -395,9 +407,14 @@
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
@@ -417,6 +434,14 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEVICES_MULTIQUEUE is not set
@@ -426,9 +451,33 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+CONFIG_IBM_NEW_EMAC_RGMII=y
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -436,6 +485,8 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -467,6 +518,7 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -481,6 +533,7 @@
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -490,8 +543,10 @@
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -525,6 +580,8 @@
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -542,6 +599,7 @@
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/lite5200_defconfig powerpc.git/arch/powerpc/configs/lite5200_defconfig
--- linux-2.6.24/arch/powerpc/configs/lite5200_defconfig        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/lite5200_defconfig 1970-01-01 01:00:00.000000000 +0100
@@ -1,847 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:24 2007
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-CONFIG_CLASSIC32=y
-# CONFIG_PPC_CHRP is not set
-CONFIG_PPC_MPC52xx=y
-CONFIG_PPC_MPC5200=y
-CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_EFIKA is not set
-CONFIG_PPC_LITE5200=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=y
-CONFIG_PPC_BESTCOMM_FEC=y
-CONFIG_PPC_BESTCOMM_GEN_BD=y
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-# CONFIG_KEXEC is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-CONFIG_PATA_MPC52xx=y
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_MPC52xx=y
-CONFIG_SERIAL_MPC52xx_CONSOLE=y
-CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/makalu_defconfig powerpc.git/arch/powerpc/configs/makalu_defconfig
--- linux-2.6.24/arch/powerpc/configs/makalu_defconfig  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/makalu_defconfig   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,812 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:18:32 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EP405 is not set
+# CONFIG_KILAUEA is not set
+CONFIG_MAKALU=y
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+CONFIG_405EX=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="kilauea.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+CONFIG_IBM_NEW_EMAC_RGMII=y
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/mpc5200_defconfig powerpc.git/arch/powerpc/configs/mpc5200_defconfig
--- linux-2.6.24/arch/powerpc/configs/mpc5200_defconfig 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/mpc5200_defconfig  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Fri Jan 18 14:19:54 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200=y
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_SIMPLE=y
+CONFIG_PPC_EFIKA=y
+CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=y
+CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_PPC_BESTCOMM_GEN_BD=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE=""
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=y
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_FEC_MPC52xx=y
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MPC5200_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/mpc8313_rdb_defconfig powerpc.git/arch/powerpc/configs/mpc8313_rdb_defconfig
--- linux-2.6.24/arch/powerpc/configs/mpc8313_rdb_defconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/mpc8313_rdb_defconfig      2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:31 2007
+# Linux kernel version: 2.6.24-rc6
+# Thu Jan 17 16:35:55 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -144,6 +144,7 @@
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -336,15 +337,16 @@
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -381,11 +383,8 @@
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfe000000
-CONFIG_MTD_PHYSMAP_LEN=0x1000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -406,7 +405,16 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -1178,7 +1186,17 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -1242,6 +1260,8 @@
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/mpc834x_itx_defconfig powerpc.git/arch/powerpc/configs/mpc834x_itx_defconfig
--- linux-2.6.24/arch/powerpc/configs/mpc834x_itx_defconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/mpc834x_itx_defconfig      2008-01-28 20:25:49.000000000 +0100
@@ -570,7 +570,8 @@
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/mpc837x_mds_defconfig powerpc.git/arch/powerpc/configs/mpc837x_mds_defconfig
--- linux-2.6.24/arch/powerpc/configs/mpc837x_mds_defconfig     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/mpc837x_mds_defconfig      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,878 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Wed Oct 10 16:31:39 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPC8313_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+CONFIG_MPC837x_MDS=y
+CONFIG_PPC_MPC837x=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_FSL_SERDES=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE=""
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_FSL=y
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_NETDEV_1000=y
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/mpc8610_hpcd_defconfig powerpc.git/arch/powerpc/configs/mpc8610_hpcd_defconfig
--- linux-2.6.24/arch/powerpc/configs/mpc8610_hpcd_defconfig    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/mpc8610_hpcd_defconfig     2008-01-28 20:25:49.000000000 +0100
@@ -696,7 +696,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -708,7 +708,60 @@
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
 # SPI support
@@ -763,7 +816,119 @@
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_PCM_OSS_PLUGINS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# ALSA PowerMac devices
+#
+
+#
+# ALSA PowerPC devices
+#
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+CONFIG_SND_SOC_MPC8610=y
+CONFIG_SND_SOC_MPC8610_HPCD=y
+CONFIG_SND_SOC_CS4270=y
+CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
+
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/pasemi_defconfig powerpc.git/arch/powerpc/configs/pasemi_defconfig
--- linux-2.6.24/arch/powerpc/configs/pasemi_defconfig  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/pasemi_defconfig   2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:03 2007
+# Linux kernel version: 2.6.24-rc6
+# Tue Jan 15 10:26:10 2008
 #
 CONFIG_PPC64=y
 
@@ -152,7 +152,6 @@
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_ELECTRA_IDE=y
 # CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
@@ -256,7 +255,7 @@
 CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
+CONFIG_PCI_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCCARD=y
@@ -663,7 +662,26 @@
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
-# CONFIG_MD is not set
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_RAID5_RESHAPE=y
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=y
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
 
 #
@@ -1686,6 +1704,10 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/ppc64_defconfig powerpc.git/arch/powerpc/configs/ppc64_defconfig
--- linux-2.6.24/arch/powerpc/configs/ppc64_defconfig   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/ppc64_defconfig    2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:07 2007
+# Fri Dec 21 14:47:29 2007
 #
 CONFIG_PPC64=y
 
@@ -211,7 +211,7 @@
 CONFIG_MPIC_U3_HT_IRQS=y
 CONFIG_MPIC_BROKEN_REGREAD=y
 CONFIG_IBMVIO=y
-# CONFIG_IBMEBUS is not set
+CONFIG_IBMEBUS=y
 # CONFIG_PPC_MPC106 is not set
 CONFIG_PPC_970_NAP=y
 CONFIG_PPC_INDIRECT_IO=y
@@ -375,7 +375,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -929,6 +929,7 @@
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_EHEA=m
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
@@ -1558,6 +1559,7 @@
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 # CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
 # CONFIG_MLX4_INFINIBAND is not set
 CONFIG_INFINIBAND_IPOIB=m
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/ps3_defconfig powerpc.git/arch/powerpc/configs/ps3_defconfig
--- linux-2.6.24/arch/powerpc/configs/ps3_defconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/ps3_defconfig      2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Tue Dec  4 22:49:57 2007
+# Linux kernel version: 2.6.24-rc8
+# Wed Jan 16 14:31:21 2008
 #
 CONFIG_PPC64=y
 
@@ -103,6 +103,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -154,7 +155,6 @@
 # CONFIG_PS3_ADVANCED is not set
 CONFIG_PS3_HTAB_SIZE=20
 # CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_USE_LPAR_ADDR=y
 CONFIG_PS3_VUART=y
 CONFIG_PS3_PS3AV=y
 CONFIG_PS3_SYS_MANAGER=y
@@ -162,6 +162,7 @@
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
+CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
@@ -225,7 +226,7 @@
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
+# CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
@@ -338,7 +339,26 @@
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
 
 #
@@ -666,14 +686,14 @@
 #
 # Sound
 #
-CONFIG_SOUND=y
+CONFIG_SOUND=m
 
 #
 # Advanced Linux Sound Architecture
 #
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -702,7 +722,7 @@
 #
 # ALSA PowerPC devices
 #
-CONFIG_SND_PS3=y
+CONFIG_SND_PS3=m
 CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
 
 #
@@ -747,7 +767,7 @@
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
+CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
 #
@@ -761,13 +781,13 @@
 #
 # USB Host Controller Drivers
 #
-CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1033,7 +1053,8 @@
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
 # CONFIG_KPROBES is not set
 # CONFIG_MARKERS is not set
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/rainier_defconfig powerpc.git/arch/powerpc/configs/rainier_defconfig
--- linux-2.6.24/arch/powerpc/configs/rainier_defconfig 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/rainier_defconfig  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,873 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:22:40 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+CONFIG_RAINIER=y
+CONFIG_440GRX=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="rainier.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+CONFIG_PPC_EARLY_DEBUG_44x=y
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/sequoia_defconfig powerpc.git/arch/powerpc/configs/sequoia_defconfig
--- linux-2.6.24/arch/powerpc/configs/sequoia_defconfig 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/sequoia_defconfig  2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:17 2007
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:23:22 2007
 #
 # CONFIG_PPC64 is not set
 
@@ -129,6 +129,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
@@ -141,8 +142,10 @@
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
 CONFIG_SEQUOIA=y
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
 CONFIG_440EPX=y
-CONFIG_440A=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -446,9 +449,7 @@
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
@@ -459,10 +460,28 @@
 # CONFIG_VETH is not set
 # CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
 CONFIG_IBM_NEW_EMAC_ZMII=y
 CONFIG_IBM_NEW_EMAC_RGMII=y
+# CONFIG_IBM_NEW_EMAC_TAH is not set
 CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -811,6 +830,7 @@
 # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
 # CONFIG_PPC_EARLY_DEBUG_BEAT is not set
 CONFIG_PPC_EARLY_DEBUG_44x=y
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
 # CONFIG_PPC_EARLY_DEBUG_CPM is not set
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/storcenter_defconfig powerpc.git/arch/powerpc/configs/storcenter_defconfig
--- linux-2.6.24/arch/powerpc/configs/storcenter_defconfig      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/storcenter_defconfig       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,1174 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Tue Jan  8 09:33:54 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_LINKSTATION is not set
+CONFIG_STORCENTER=y
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_PPC_HOLLY is not set
+# CONFIG_PPC_PRPMC2800 is not set
+CONFIG_MPC10X_BRIDGE=y
+CONFIG_MPC10X_OPENPIC=y
+# CONFIG_MPC10X_STORE_GATHERING is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="storcenter.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xFF800000
+CONFIG_MTD_PHYSMAP_LEN=0x00800000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=y
+CONFIG_MD_RAID5_RESHAPE=y
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/taishan_defconfig powerpc.git/arch/powerpc/configs/taishan_defconfig
--- linux-2.6.24/arch/powerpc/configs/taishan_defconfig 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/taishan_defconfig  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,790 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:23:39 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+CONFIG_TAISHAN=y
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+CONFIG_440GX=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="taishan.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/walnut_defconfig powerpc.git/arch/powerpc/configs/walnut_defconfig
--- linux-2.6.24/arch/powerpc/configs/walnut_defconfig  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/walnut_defconfig   2008-01-28 20:25:49.000000000 +0100
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:33 2007
+# Linux kernel version: 2.6.24-rc6
+# Mon Dec 24 11:23:58 2007
 #
 # CONFIG_PPC64 is not set
 
@@ -40,7 +40,7 @@
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
@@ -127,6 +127,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
@@ -136,7 +137,9 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_EP405 is not set
 # CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
 CONFIG_WALNUT=y
 # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
 CONFIG_405GP=y
@@ -204,11 +207,17 @@
 # Bus options
 #
 CONFIG_ZONE_DMA=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Advanced setup
@@ -373,11 +382,13 @@
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -400,9 +411,14 @@
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
@@ -411,7 +427,10 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_IDE is not set
 
 #
@@ -423,6 +442,14 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEVICES_MULTIQUEUE is not set
@@ -432,9 +459,17 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=128
 CONFIG_IBM_NEW_EMAC_TXB=64
@@ -446,9 +481,38 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -456,6 +520,8 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -487,6 +553,7 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -501,6 +568,7 @@
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -510,8 +578,10 @@
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -545,6 +615,8 @@
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -560,9 +632,10 @@
 #
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -574,6 +647,7 @@
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/configs/warp_defconfig powerpc.git/arch/powerpc/configs/warp_defconfig
--- linux-2.6.24/arch/powerpc/configs/warp_defconfig    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/configs/warp_defconfig     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,1057 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Tue Jan  8 12:23:23 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-pika"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+CONFIG_WARP=y
+CONFIG_440EP=y
+CONFIG_IBM440EP_ERR42=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="warp.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_WAIT_SCAN is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+CONFIG_SENSORS_AD7414=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_WBSD is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/Makefile powerpc.git/arch/powerpc/kernel/Makefile
--- linux-2.6.24/arch/powerpc/kernel/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/Makefile    2008-01-28 20:25:49.000000000 +0100
@@ -3,7 +3,7 @@
 #
 
 ifeq ($(CONFIG_PPC64),y)
-EXTRA_CFLAGS   += -mno-minimal-toc
+CFLAGS_prom_init.o     += -mno-minimal-toc
 endif
 ifeq ($(CONFIG_PPC32),y)
 CFLAGS_prom_init.o      += -fPIC
@@ -70,6 +70,7 @@
 obj-$(CONFIG_PCI)              += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
                                   pci-common.o
 obj-$(CONFIG_PCI_MSI)          += msi.o
+obj-$(CONFIG_RAPIDIO)          += rio.o
 obj-$(CONFIG_KEXEC)            += machine_kexec.o crash.o \
                                   machine_kexec_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_AUDIT)            += audit.o
@@ -91,3 +92,13 @@
 
 extra-$(CONFIG_PPC_FPU)                += fpu.o
 extra-$(CONFIG_PPC64)          += entry_64.o
+
+extra-y                                += systbl_chk.i
+$(obj)/systbl.o:               systbl_chk
+
+quiet_cmd_systbl_chk = CALL    $<
+      cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i
+
+PHONY += systbl_chk
+systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
+       $(call cmd,systbl_chk)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/btext.c powerpc.git/arch/powerpc/kernel/btext.c
--- linux-2.6.24/arch/powerpc/kernel/btext.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/btext.c     2008-01-28 20:25:49.000000000 +0100
@@ -236,7 +236,7 @@
        if (rc == 0 || !allow_nonstdout)
                return rc;
 
-       for (np = NULL; (np = of_find_node_by_type(np, "display"));) {
+       for_each_node_by_type(np, "display") {
                if (of_get_property(np, "linux,opened", NULL)) {
                        printk("trying %s ...\n", np->full_name);
                        rc = btext_initialize(np);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/cpu_setup_44x.S powerpc.git/arch/powerpc/kernel/cpu_setup_44x.S
--- linux-2.6.24/arch/powerpc/kernel/cpu_setup_44x.S    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/cpu_setup_44x.S     2008-01-28 20:25:49.000000000 +0100
@@ -23,11 +23,24 @@
        mflr    r4
        bl      __init_fpu_44x
        bl      __plb_disable_wrp
+       bl      __fixup_440A_mcheck
        mtlr    r4
        blr
 _GLOBAL(__setup_cpu_440grx)
-       b       __plb_disable_wrp
+       mflr    r4
+       bl      __plb_disable_wrp
+       bl      __fixup_440A_mcheck
+       mtlr    r4
+       blr
+_GLOBAL(__setup_cpu_440gx)
+_GLOBAL(__setup_cpu_440spe)
+       b       __fixup_440A_mcheck
 
+ /* Temporary fixup for arch/ppc until we kill the whole thing */
+#ifndef CONFIG_PPC_MERGE
+_GLOBAL(__fixup_440A_mcheck)
+       blr
+#endif
 
 /* enable APU between CPU and FPU */
 _GLOBAL(__init_fpu_44x)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/cputable.c powerpc.git/arch/powerpc/kernel/cputable.c
--- linux-2.6.24/arch/powerpc/kernel/cputable.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/cputable.c  2008-01-28 20:25:49.000000000 +0100
@@ -33,7 +33,9 @@
 #ifdef CONFIG_PPC32
 extern void __setup_cpu_440ep(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -85,6 +87,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/power3",
                .oprofile_type          = PPC_OPROFILE_RS64,
+               .machine_check          = machine_check_generic,
                .platform               = "power3",
        },
        {       /* Power3+ */
@@ -99,6 +102,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/power3",
                .oprofile_type          = PPC_OPROFILE_RS64,
+               .machine_check          = machine_check_generic,
                .platform               = "power3",
        },
        {       /* Northstar */
@@ -113,6 +117,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/rs64",
                .oprofile_type          = PPC_OPROFILE_RS64,
+               .machine_check          = machine_check_generic,
                .platform               = "rs64",
        },
        {       /* Pulsar */
@@ -127,6 +132,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/rs64",
                .oprofile_type          = PPC_OPROFILE_RS64,
+               .machine_check          = machine_check_generic,
                .platform               = "rs64",
        },
        {       /* I-star */
@@ -141,6 +147,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/rs64",
                .oprofile_type          = PPC_OPROFILE_RS64,
+               .machine_check          = machine_check_generic,
                .platform               = "rs64",
        },
        {       /* S-star */
@@ -155,6 +162,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/rs64",
                .oprofile_type          = PPC_OPROFILE_RS64,
+               .machine_check          = machine_check_generic,
                .platform               = "rs64",
        },
        {       /* Power4 */
@@ -169,6 +177,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/power4",
                .oprofile_type          = PPC_OPROFILE_POWER4,
+               .machine_check          = machine_check_generic,
                .platform               = "power4",
        },
        {       /* Power4+ */
@@ -183,6 +192,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/power4",
                .oprofile_type          = PPC_OPROFILE_POWER4,
+               .machine_check          = machine_check_generic,
                .platform               = "power4",
        },
        {       /* PPC970 */
@@ -200,6 +210,7 @@
                .cpu_restore            = __restore_cpu_ppc970,
                .oprofile_cpu_type      = "ppc64/970",
                .oprofile_type          = PPC_OPROFILE_POWER4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc970",
        },
        {       /* PPC970FX */
@@ -217,6 +228,7 @@
                .cpu_restore            = __restore_cpu_ppc970,
                .oprofile_cpu_type      = "ppc64/970",
                .oprofile_type          = PPC_OPROFILE_POWER4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc970",
        },
        {       /* PPC970MP DD1.0 - no DEEPNAP, use regular 970 init */
@@ -234,6 +246,7 @@
                .cpu_restore            = __restore_cpu_ppc970,
                .oprofile_cpu_type      = "ppc64/970MP",
                .oprofile_type          = PPC_OPROFILE_POWER4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc970",
        },
        {       /* PPC970MP */
@@ -251,6 +264,7 @@
                .cpu_restore            = __restore_cpu_ppc970,
                .oprofile_cpu_type      = "ppc64/970MP",
                .oprofile_type          = PPC_OPROFILE_POWER4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc970",
        },
        {       /* PPC970GX */
@@ -267,6 +281,7 @@
                .cpu_setup              = __setup_cpu_ppc970,
                .oprofile_cpu_type      = "ppc64/970",
                .oprofile_type          = PPC_OPROFILE_POWER4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc970",
        },
        {       /* Power5 GR */
@@ -286,6 +301,7 @@
                 */
                .oprofile_mmcra_sihv    = MMCRA_SIHV,
                .oprofile_mmcra_sipr    = MMCRA_SIPR,
+               .machine_check          = machine_check_generic,
                .platform               = "power5",
        },
        {       /* Power5++ */
@@ -301,6 +317,7 @@
                .oprofile_type          = PPC_OPROFILE_POWER4,
                .oprofile_mmcra_sihv    = MMCRA_SIHV,
                .oprofile_mmcra_sipr    = MMCRA_SIPR,
+               .machine_check          = machine_check_generic,
                .platform               = "power5+",
        },
        {       /* Power5 GS */
@@ -317,6 +334,7 @@
                .oprofile_type          = PPC_OPROFILE_POWER4,
                .oprofile_mmcra_sihv    = MMCRA_SIHV,
                .oprofile_mmcra_sipr    = MMCRA_SIPR,
+               .machine_check          = machine_check_generic,
                .platform               = "power5+",
        },
        {       /* POWER6 in P5+ mode; 2.04-compliant processor */
@@ -327,6 +345,7 @@
                .cpu_user_features      = COMMON_USER_POWER5_PLUS,
                .icache_bsize           = 128,
                .dcache_bsize           = 128,
+               .machine_check          = machine_check_generic,
                .platform               = "power5+",
        },
        {       /* Power6 */
@@ -346,6 +365,7 @@
                .oprofile_mmcra_sipr    = POWER6_MMCRA_SIPR,
                .oprofile_mmcra_clear   = POWER6_MMCRA_THRM |
                        POWER6_MMCRA_OTHER,
+               .machine_check          = machine_check_generic,
                .platform               = "power6x",
        },
        {       /* 2.05-compliant processor, i.e. Power6 "architected" mode */
@@ -356,6 +376,7 @@
                .cpu_user_features      = COMMON_USER_POWER6,
                .icache_bsize           = 128,
                .dcache_bsize           = 128,
+               .machine_check          = machine_check_generic,
                .platform               = "power6",
        },
        {       /* Cell Broadband Engine */
@@ -372,6 +393,7 @@
                .pmc_type               = PPC_PMC_IBM,
                .oprofile_cpu_type      = "ppc64/cell-be",
                .oprofile_type          = PPC_OPROFILE_CELL,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc-cell-be",
        },
        {       /* PA Semi PA6T */
@@ -388,6 +410,7 @@
                .cpu_restore            = __restore_cpu_pa6t,
                .oprofile_cpu_type      = "ppc64/pa6t",
                .oprofile_type          = PPC_OPROFILE_PA6T,
+               .machine_check          = machine_check_generic,
                .platform               = "pa6t",
        },
        {       /* default match */
@@ -400,6 +423,7 @@
                .dcache_bsize           = 128,
                .num_pmcs               = 6,
                .pmc_type               = PPC_PMC_IBM,
+               .machine_check          = machine_check_generic,
                .platform               = "power4",
        }
 #endif /* CONFIG_PPC64 */
@@ -414,6 +438,7 @@
                        PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc601",
        },
        {       /* 603 */
@@ -425,6 +450,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
        {       /* 603e */
@@ -436,6 +462,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
        {       /* 603ev */
@@ -447,6 +474,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
        {       /* 604 */
@@ -459,6 +487,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 2,
                .cpu_setup              = __setup_cpu_604,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc604",
        },
        {       /* 604e */
@@ -471,6 +500,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_604,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc604",
        },
        {       /* 604r */
@@ -483,6 +513,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_604,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc604",
        },
        {       /* 604ev */
@@ -495,6 +526,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_604,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc604",
        },
        {       /* 740/750 (0x4202, don't support TAU ?) */
@@ -507,6 +539,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750CX (80100 and 8010x?) */
@@ -519,6 +552,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750cx,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750CX (82201 and 82202) */
@@ -531,6 +565,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750cx,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750CXe (82214) */
@@ -543,6 +578,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750cx,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750CXe "Gekko" (83214) */
@@ -555,6 +591,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750cx,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750CL */
@@ -567,6 +604,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 745/755 */
@@ -579,6 +617,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750FX rev 1.x */
@@ -591,6 +630,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750FX rev 2.0 must disable HID0[DPM] */
@@ -603,6 +643,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750FX (All revs except 2.0) */
@@ -615,6 +656,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750fx,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 750GX */
@@ -627,6 +669,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750fx,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 740/750 (L2CR bit need fixup for 740) */
@@ -639,6 +682,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_750,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc750",
        },
        {       /* 7400 rev 1.1 ? (no TAU) */
@@ -652,6 +696,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_7400,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7400",
        },
        {       /* 7400 */
@@ -665,6 +710,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_7400,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7400",
        },
        {       /* 7410 */
@@ -678,6 +724,7 @@
                .dcache_bsize           = 32,
                .num_pmcs               = 4,
                .cpu_setup              = __setup_cpu_7410,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7400",
        },
        {       /* 7450 2.0 - no doze/nap */
@@ -693,6 +740,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7450 2.1 */
@@ -708,6 +756,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7450 2.3 and newer */
@@ -723,6 +772,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7455 rev 1.x */
@@ -738,6 +788,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7455 rev 2.0 */
@@ -753,6 +804,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7455 others */
@@ -768,6 +820,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7447/7457 Rev 1.0 */
@@ -783,6 +836,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7447/7457 Rev 1.1 */
@@ -798,6 +852,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7447/7457 Rev 1.2 and later */
@@ -812,6 +867,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7447A */
@@ -827,6 +883,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 7448 */
@@ -842,6 +899,7 @@
                .cpu_setup              = __setup_cpu_745x,
                .oprofile_cpu_type      = "ppc/7450",
                .oprofile_type          = PPC_OPROFILE_G4,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc7450",
        },
        {       /* 82xx (8240, 8245, 8260 are all 603e cores) */
@@ -853,6 +911,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
        {       /* All G2_LE (603e core, plus some) have the same pvr */
@@ -864,6 +923,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
        {       /* e300c1 (a 603e core, plus some) on 83xx */
@@ -875,6 +935,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
        {       /* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */
@@ -886,9 +947,10 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
-       {       /* e300c3 on 83xx  */
+       {       /* e300c3 (e300c1, plus one IU, half cache size) on 83xx */
                .pvr_mask               = 0x7fff0000,
                .pvr_value              = 0x00850000,
                .cpu_name               = "e300c3",
@@ -899,6 +961,18 @@
                .cpu_setup              = __setup_cpu_603,
                .platform               = "ppc603",
        },
+       {       /* e300c4 (e300c1, plus one IU) */
+               .pvr_mask               = 0x7fff0000,
+               .pvr_value              = 0x00860000,
+               .cpu_name               = "e300c4",
+               .cpu_features           = CPU_FTRS_E300,
+               .cpu_user_features      = COMMON_USER,
+               .icache_bsize           = 32,
+               .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_603,
+               .machine_check          = machine_check_generic,
+               .platform               = "ppc603",
+       },
        {       /* default match, we assume split I/D cache & TB (non-601)... */
                .pvr_mask               = 0x00000000,
                .pvr_value              = 0x00000000,
@@ -907,6 +981,7 @@
                .cpu_user_features      = COMMON_USER,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_generic,
                .platform               = "ppc603",
        },
 #endif /* CLASSIC_PPC */
@@ -933,6 +1008,7 @@
                .cpu_user_features      = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
                .icache_bsize           = 16,
                .dcache_bsize           = 16,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc403",
        },
        {       /* 403GCX */
@@ -944,6 +1020,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
                .icache_bsize           = 16,
                .dcache_bsize           = 16,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc403",
        },
        {       /* 403G ?? */
@@ -954,6 +1031,7 @@
                .cpu_user_features      = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
                .icache_bsize           = 16,
                .dcache_bsize           = 16,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc403",
        },
        {       /* 405GP */
@@ -965,6 +1043,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* STB 03xxx */
@@ -976,6 +1055,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* STB 04xxx */
@@ -987,6 +1067,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* NP405L */
@@ -998,6 +1079,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* NP4GS3 */
@@ -1009,6 +1091,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {   /* NP405H */
@@ -1020,6 +1103,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* 405GPr */
@@ -1031,6 +1115,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {   /* STBx25xx */
@@ -1042,6 +1127,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* 405LP */
@@ -1052,6 +1138,7 @@
                .cpu_user_features      = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* Xilinx Virtex-II Pro  */
@@ -1063,6 +1150,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* Xilinx Virtex-4 FX */
@@ -1074,6 +1162,7 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* 405EP */
@@ -1085,17 +1174,31 @@
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
        {       /* 405EX */
-               .pvr_mask               = 0xffff0000,
-               .pvr_value              = 0x12910000,
+               .pvr_mask               = 0xffff0004,
+               .pvr_value              = 0x12910004,
                .cpu_name               = "405EX",
                .cpu_features           = CPU_FTRS_40X,
                .cpu_user_features      = PPC_FEATURE_32 |
                        PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
+               .platform               = "ppc405",
+       },
+       {       /* 405EXr */
+               .pvr_mask               = 0xffff0004,
+               .pvr_value              = 0x12910000,
+               .cpu_name               = "405EXr",
+               .cpu_features           = CPU_FTRS_40X,
+               .cpu_user_features      = PPC_FEATURE_32 |
+                       PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+               .icache_bsize           = 32,
+               .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc405",
        },
 
@@ -1109,6 +1212,7 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc440",
        },
        { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
@@ -1120,6 +1224,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_440ep,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc440",
        },
        {
@@ -1130,6 +1235,19 @@
                .cpu_user_features      = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
+               .platform               = "ppc440",
+       },
+       { /* Matches both physical and logical PVR for 440EP (logical pvr = pvr | 0x8) */
+               .pvr_mask               = 0xf0000ff7,
+               .pvr_value              = 0x400008d4,
+               .cpu_name               = "440EP Rev. C",
+               .cpu_features           = CPU_FTRS_44X,
+               .cpu_user_features      = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+               .icache_bsize           = 32,
+               .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_440ep,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc440",
        },
        { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
@@ -1141,6 +1259,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_440ep,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc440",
        },
        { /* 440GRX */
@@ -1152,6 +1271,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_440grx,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
        { /* Use logical PVR for 440EPx (logical pvr = pvr | 0x8) */
@@ -1163,6 +1283,7 @@
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
                .cpu_setup              = __setup_cpu_440epx,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
        {       /* 440GP Rev. B */
@@ -1173,6 +1294,7 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc440gp",
        },
        {       /* 440GP Rev. C */
@@ -1183,6 +1305,7 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc440gp",
        },
        { /* 440GX Rev. A */
@@ -1193,6 +1316,8 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_440gx,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
        { /* 440GX Rev. B */
@@ -1203,6 +1328,8 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_440gx,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
        { /* 440GX Rev. C */
@@ -1213,6 +1340,8 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_440gx,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
        { /* 440GX Rev. F */
@@ -1223,6 +1352,8 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_440gx,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
        { /* 440SP Rev. A */
@@ -1233,6 +1364,7 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_4xx,
                .platform               = "ppc440",
        },
        { /* 440SPe Rev. A */
@@ -1243,6 +1375,8 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_440spe,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
        { /* 440SPe Rev. B */
@@ -1253,10 +1387,13 @@
                .cpu_user_features      = COMMON_USER_BOOKE,
                .icache_bsize           = 32,
                .dcache_bsize           = 32,
+               .cpu_setup              = __setup_cpu_440spe,
+               .machine_check          = machine_check_440A,
                .platform               = "ppc440",
        },
 #endif /* CONFIG_44x */
 #ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_E200
        {       /* e200z5 */
                .pvr_mask               = 0xfff00000,
                .pvr_value              = 0x81000000,
@@ -1267,6 +1404,7 @@
                        PPC_FEATURE_HAS_EFP_SINGLE |
                        PPC_FEATURE_UNIFIED_CACHE,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_e200,
                .platform               = "ppc5554",
        },
        {       /* e200z6 */
@@ -1280,8 +1418,10 @@
                        PPC_FEATURE_HAS_EFP_SINGLE_COMP |
                        PPC_FEATURE_UNIFIED_CACHE,
                .dcache_bsize           = 32,
+               .machine_check          = machine_check_e200,
                .platform               = "ppc5554",
        },
+#elif defined(CONFIG_E500)
        {       /* e500 */
                .pvr_mask               = 0xffff0000,
                .pvr_value              = 0x80200000,
@@ -1296,6 +1436,7 @@
                .num_pmcs               = 4,
                .oprofile_cpu_type      = "ppc/e500",
                .oprofile_type          = PPC_OPROFILE_BOOKE,
+               .machine_check          = machine_check_e500,
                .platform               = "ppc8540",
        },
        {       /* e500v2 */
@@ -1313,9 +1454,11 @@
                .num_pmcs               = 4,
                .oprofile_cpu_type      = "ppc/e500",
                .oprofile_type          = PPC_OPROFILE_BOOKE,
+               .machine_check          = machine_check_e500,
                .platform               = "ppc8548",
        },
 #endif
+#endif
 #if !CLASSIC_PPC
        {       /* default match */
                .pvr_mask               = 0x00000000,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/crash.c powerpc.git/arch/powerpc/kernel/crash.c
--- linux-2.6.24/arch/powerpc/kernel/crash.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/crash.c     2008-01-28 20:25:49.000000000 +0100
@@ -32,6 +32,8 @@
 #include <asm/lmb.h>
 #include <asm/firmware.h>
 #include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/setjmp.h>
 
 #ifdef DEBUG
 #include <asm/udbg.h>
@@ -45,6 +47,11 @@
 static cpumask_t cpus_in_crash = CPU_MASK_NONE;
 cpumask_t cpus_in_sr = CPU_MASK_NONE;
 
+#define CRASH_HANDLER_MAX 1
+/* NULL terminated list of shutdown handles */
+static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1];
+static DEFINE_SPINLOCK(crash_handlers_lock);
+
 #ifdef CONFIG_SMP
 static atomic_t enter_on_soft_reset = ATOMIC_INIT(0);
 
@@ -285,9 +292,72 @@
 }
 #endif /* CONFIG_SPU_BASE */
 
+/*
+ * Register a function to be called on shutdown.  Only use this if you
+ * can't reset your device in the second kernel.
+ */
+int crash_shutdown_register(crash_shutdown_t handler)
+{
+       unsigned int i, rc;
+
+       spin_lock(&crash_handlers_lock);
+       for (i = 0 ; i < CRASH_HANDLER_MAX; i++)
+               if (!crash_shutdown_handles[i]) {
+                       /* Insert handle at first empty entry */
+                       crash_shutdown_handles[i] = handler;
+                       rc = 0;
+                       break;
+               }
+
+       if (i == CRASH_HANDLER_MAX) {
+               printk(KERN_ERR "Crash shutdown handles full, "
+                      "not registered.\n");
+               rc = 1;
+       }
+
+       spin_unlock(&crash_handlers_lock);
+       return rc;
+}
+EXPORT_SYMBOL(crash_shutdown_register);
+
+int crash_shutdown_unregister(crash_shutdown_t handler)
+{
+       unsigned int i, rc;
+
+       spin_lock(&crash_handlers_lock);
+       for (i = 0 ; i < CRASH_HANDLER_MAX; i++)
+               if (crash_shutdown_handles[i] == handler)
+                       break;
+
+       if (i == CRASH_HANDLER_MAX) {
+               printk(KERN_ERR "Crash shutdown handle not found\n");
+               rc = 1;
+       } else {
+               /* Shift handles down */
+               for (; crash_shutdown_handles[i]; i++)
+                       crash_shutdown_handles[i] =
+                               crash_shutdown_handles[i+1];
+               rc = 0;
+       }
+
+       spin_unlock(&crash_handlers_lock);
+       return rc;
+}
+EXPORT_SYMBOL(crash_shutdown_unregister);
+
+static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
+
+static int handle_fault(struct pt_regs *regs)
+{
+       longjmp(crash_shutdown_buf, 1);
+       return 0;
+}
+
 void default_machine_crash_shutdown(struct pt_regs *regs)
 {
-       unsigned int irq;
+       unsigned int i;
+       int (*old_handler)(struct pt_regs *regs);
+
 
        /*
         * This function is only called after the system
@@ -301,15 +371,36 @@
         */
        hard_irq_disable();
 
-       for_each_irq(irq) {
-               struct irq_desc *desc = irq_desc + irq;
+       for_each_irq(i) {
+               struct irq_desc *desc = irq_desc + i;
 
                if (desc->status & IRQ_INPROGRESS)
-                       desc->chip->eoi(irq);
+                       desc->chip->eoi(i);
 
                if (!(desc->status & IRQ_DISABLED))
-                       desc->chip->disable(irq);
+                       desc->chip->disable(i);
+       }
+
+       /*
+        * Call registered shutdown routines savely.  Swap out
+        * __debugger_fault_handler, and replace on exit.
+        */
+       old_handler = __debugger_fault_handler;
+       __debugger_fault_handler = handle_fault;
+       for (i = 0; crash_shutdown_handles[i]; i++) {
+               if (setjmp(crash_shutdown_buf) == 0) {
+                       /*
+                        * Insert syncs and delay to ensure
+                        * instructions in the dangerous region don't
+                        * leak away from this protected region.
+                        */
+                       asm volatile("sync; isync");
+                       /* dangerous region */
+                       crash_shutdown_handles[i]();
+                       asm volatile("sync; isync");
+               }
        }
+       __debugger_fault_handler = old_handler;
 
        /*
         * Make a note of crashing cpu. Will be used in machine_kexec
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/dma_64.c powerpc.git/arch/powerpc/kernel/dma_64.c
--- linux-2.6.24/arch/powerpc/kernel/dma_64.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/dma_64.c    2008-01-28 20:25:49.000000000 +0100
@@ -112,10 +112,16 @@
 /*
  * Generic direct DMA implementation
  *
- * This implementation supports a global offset that can be applied if
- * the address at which memory is visible to devices is not 0.
+ * This implementation supports a per-device offset that can be applied if
+ * the address at which memory is visible to devices is not 0. Platform code
+ * can set archdata.dma_data to an unsigned long holding the offset. By
+ * default the offset is zero.
  */
-unsigned long dma_direct_offset;
+
+static unsigned long get_dma_direct_offset(struct device *dev)
+{
+       return (unsigned long)dev->archdata.dma_data;
+}
 
 static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
                                       dma_addr_t *dma_handle, gfp_t flag)
@@ -124,13 +130,12 @@
        void *ret;
        int node = dev->archdata.numa_node;
 
-       /* TODO: Maybe use the numa node here too ? */
        page = alloc_pages_node(node, flag, get_order(size));
        if (page == NULL)
                return NULL;
        ret = page_address(page);
        memset(ret, 0, size);
-       *dma_handle = virt_to_abs(ret) | dma_direct_offset;
+       *dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
 
        return ret;
 }
@@ -145,7 +150,7 @@
                                        size_t size,
                                        enum dma_data_direction direction)
 {
-       return virt_to_abs(ptr) | dma_direct_offset;
+       return virt_to_abs(ptr) + get_dma_direct_offset(dev);
 }
 
 static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr,
@@ -161,7 +166,7 @@
        int i;
 
        for_each_sg(sgl, sg, nents, i) {
-               sg->dma_address = sg_phys(sg) | dma_direct_offset;
+               sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
                sg->dma_length = sg->length;
        }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/head_44x.S powerpc.git/arch/powerpc/kernel/head_44x.S
--- linux-2.6.24/arch/powerpc/kernel/head_44x.S 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/head_44x.S  2008-01-28 20:25:49.000000000 +0100
@@ -289,11 +289,8 @@
        CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
 
        /* Machine Check Interrupt */
-#ifdef CONFIG_440A
-       MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#else
        CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#endif
+       MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception)
 
        /* Data Storage Interrupt */
        START_EXCEPTION(DataStorage)
@@ -674,6 +671,15 @@
  */
 
 /*
+ * Adjust the machine check IVOR on 440A cores
+ */
+_GLOBAL(__fixup_440A_mcheck)
+       li      r3,MachineCheckA@l
+       mtspr   SPRN_IVOR1,r3
+       sync
+       blr
+
+/*
  * extern void giveup_altivec(struct task_struct *prev)
  *
  * The 44x core does not have an AltiVec unit.
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/head_booke.h powerpc.git/arch/powerpc/kernel/head_booke.h
--- linux-2.6.24/arch/powerpc/kernel/head_booke.h       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/head_booke.h        2008-01-28 20:25:49.000000000 +0100
@@ -166,7 +166,7 @@
        mfspr   r5,SPRN_ESR;                                    \
        stw     r5,_ESR(r11);                                   \
        addi    r3,r1,STACK_FRAME_OVERHEAD;                     \
-       EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+       EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
                          NOCOPY, mcheck_transfer_to_handler,   \
                          ret_from_mcheck_exc)
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/head_fsl_booke.S powerpc.git/arch/powerpc/kernel/head_fsl_booke.S
--- linux-2.6.24/arch/powerpc/kernel/head_fsl_booke.S   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/head_fsl_booke.S    2008-01-28 20:25:49.000000000 +0100
@@ -73,8 +73,8 @@
 /* We try to not make any assumptions about how the boot loader
  * setup or used the TLBs.  We invalidate all mappings from the
  * boot loader and load a single entry in TLB1[0] to map the
- * first 16M of kernel memory.  Any boot info passed from the
- * bootloader needs to live in this first 16M.
+ * first 64M of kernel memory.  Any boot info passed from the
+ * bootloader needs to live in this first 64M.
  *
  * Requirement on bootloader:
  *  - The page we're executing in needs to reside in TLB1 and
@@ -167,7 +167,7 @@
        mtspr   SPRN_MAS0,r7
        tlbre
 
-       /* Just modify the entry ID and EPN for the temp mapping */
+       /* Just modify the entry ID, EPN and RPN for the temp mapping */
        lis     r7,0x1000       /* Set MAS0(TLBSEL) = 1 */
        rlwimi  r7,r5,16,4,15   /* Setup MAS0 = TLBSEL | ESEL(r5) */
        mtspr   SPRN_MAS0,r7
@@ -177,9 +177,12 @@
        ori     r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
        mtspr   SPRN_MAS1,r6
        mfspr   r6,SPRN_MAS2
-       li      r7,0            /* temp EPN = 0 */
+       lis     r7,PHYSICAL_START@h
        rlwimi  r7,r6,0,20,31
        mtspr   SPRN_MAS2,r7
+       mfspr   r6,SPRN_MAS3
+       rlwimi  r7,r6,0,20,31
+       mtspr   SPRN_MAS3,r7
        tlbwe
 
        xori    r6,r4,1
@@ -222,11 +225,11 @@
        lis     r6,0x1000               /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
        mtspr   SPRN_MAS0,r6
        lis     r6,(MAS1_VALID|MAS1_IPROT)@h
-       ori     r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
+       ori     r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
        mtspr   SPRN_MAS1,r6
        li      r7,0
-       lis     r6,KERNELBASE@h
-       ori     r6,r6,KERNELBASE@l
+       lis     r6,PAGE_OFFSET@h
+       ori     r6,r6,PAGE_OFFSET@l
        rlwimi  r6,r7,0,20,31
        mtspr   SPRN_MAS2,r6
        li      r7,(MAS3_SX|MAS3_SW|MAS3_SR)
@@ -234,6 +237,9 @@
        tlbwe
 
 /* 7. Jump to KERNELBASE mapping */
+       lis     r6,KERNELBASE@h
+       ori     r6,r6,KERNELBASE@l
+       rlwimi  r6,r7,0,20,31
        lis     r7,MSR_KERNEL@h
        ori     r7,r7,MSR_KERNEL@l
        bl      1f                      /* Find our address */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/ibmebus.c powerpc.git/arch/powerpc/kernel/ibmebus.c
--- linux-2.6.24/arch/powerpc/kernel/ibmebus.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/ibmebus.c   2008-01-28 20:25:49.000000000 +0100
@@ -41,6 +41,7 @@
 #include <linux/kobject.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 #include <asm/ibmebus.h>
 #include <asm/abs_addr.h>
@@ -52,7 +53,7 @@
 struct bus_type ibmebus_bus_type;
 
 /* These devices will automatically be added to the bus during init */
-static struct of_device_id builtin_matches[] = {
+static struct of_device_id __initdata builtin_matches[] = {
        { .compatible = "IBM,lhca" },
        { .compatible = "IBM,lhea" },
        {},
@@ -171,7 +172,7 @@
 
        root = of_find_node_by_path("/");
 
-       for (child = NULL; (child = of_get_next_child(root, child)); ) {
+       for_each_child_of_node(root, child) {
                if (!of_match_node(matches, child))
                        continue;
 
@@ -197,16 +198,13 @@
        /* If the driver uses devices that ibmebus doesn't know, add them */
        ibmebus_create_devices(drv->match_table);
 
-       drv->driver.name   = drv->name;
-       drv->driver.bus    = &ibmebus_bus_type;
-
-       return driver_register(&drv->driver);
+       return of_register_driver(drv, &ibmebus_bus_type);
 }
 EXPORT_SYMBOL(ibmebus_register_driver);
 
 void ibmebus_unregister_driver(struct of_platform_driver *drv)
 {
-       driver_unregister(&drv->driver);
+       of_unregister_driver(drv);
 }
 EXPORT_SYMBOL(ibmebus_unregister_driver);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/iommu.c powerpc.git/arch/powerpc/kernel/iommu.c
--- linux-2.6.24/arch/powerpc/kernel/iommu.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/iommu.c     2008-01-28 20:25:49.000000000 +0100
@@ -532,16 +532,14 @@
        return tbl;
 }
 
-void iommu_free_table(struct device_node *dn)
+void iommu_free_table(struct iommu_table *tbl, const char *node_name)
 {
-       struct pci_dn *pdn = dn->data;
-       struct iommu_table *tbl = pdn->iommu_table;
        unsigned long bitmap_sz, i;
        unsigned int order;
 
        if (!tbl || !tbl->it_map) {
                printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__,
-                               dn->full_name);
+                               node_name);
                return;
        }
 
@@ -550,7 +548,7 @@
        for (i = 0; i < (tbl->it_size/64); i++) {
                if (tbl->it_map[i] != 0) {
                        printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
-                               __FUNCTION__, dn->full_name);
+                               __FUNCTION__, node_name);
                        break;
                }
        }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/isa-bridge.c powerpc.git/arch/powerpc/kernel/isa-bridge.c
--- linux-2.6.24/arch/powerpc/kernel/isa-bridge.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/isa-bridge.c        2008-01-28 20:25:49.000000000 +0100
@@ -108,7 +108,7 @@
        if (size > 0x10000)
                size = 0x10000;
 
-       printk(KERN_ERR "no ISA IO ranges or unexpected isa range,"
+       printk(KERN_ERR "no ISA IO ranges or unexpected isa range, "
               "mapping 64k\n");
 
        __ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
@@ -116,7 +116,7 @@
        return;
 
 inval_range:
-       printk(KERN_ERR "no ISA IO ranges or unexpected isa range,"
+       printk(KERN_ERR "no ISA IO ranges or unexpected isa range, "
               "mapping 64k\n");
        __ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
                     0x10000, _PAGE_NO_CACHE|_PAGE_GUARDED);
@@ -145,7 +145,7 @@
        for_each_node_by_type(np, "isa") {
                /* Look for our hose being a parent */
                for (parent = of_get_parent(np); parent;) {
-                       if (parent == hose->arch_data) {
+                       if (parent == hose->dn) {
                                of_node_put(parent);
                                break;
                        }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/legacy_serial.c powerpc.git/arch/powerpc/kernel/legacy_serial.c
--- linux-2.6.24/arch/powerpc/kernel/legacy_serial.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/legacy_serial.c     2008-01-28 20:25:49.000000000 +0100
@@ -307,7 +307,7 @@
        }
 
        /* First fill our array with SOC ports */
-       for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
+       for_each_compatible_node(np, "serial", "ns16550") {
                struct device_node *soc = of_get_parent(np);
                if (soc && !strcmp(soc->type, "soc")) {
                        index = add_legacy_soc_port(np, np);
@@ -318,7 +318,7 @@
        }
 
        /* First fill our array with ISA ports */
-       for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
+       for_each_node_by_type(np, "serial") {
                struct device_node *isa = of_get_parent(np);
                if (isa && !strcmp(isa->name, "isa")) {
                        index = add_legacy_isa_port(np, isa);
@@ -329,7 +329,7 @@
        }
 
        /* First fill our array with tsi-bridge ports */
-       for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
+       for_each_compatible_node(np, "serial", "ns16550") {
                struct device_node *tsi = of_get_parent(np);
                if (tsi && !strcmp(tsi->type, "tsi-bridge")) {
                        index = add_legacy_soc_port(np, np);
@@ -340,7 +340,7 @@
        }
 
        /* First fill our array with opb bus ports */
-       for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
+       for_each_compatible_node(np, "serial", "ns16550") {
                struct device_node *opb = of_get_parent(np);
                if (opb && (!strcmp(opb->type, "opb") ||
                            of_device_is_compatible(opb, "ibm,opb"))) {
@@ -474,7 +474,7 @@
 
        /*
         * Before we register the platfrom serial devices, we need
-        * to fixup their interrutps and their IO ports.
+        * to fixup their interrupts and their IO ports.
         */
        DBG("Fixing serial ports interrupts and IO ports ...\n");
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/lparcfg.c powerpc.git/arch/powerpc/kernel/lparcfg.c
--- linux-2.6.24/arch/powerpc/kernel/lparcfg.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/lparcfg.c   2008-01-28 20:25:49.000000000 +0100
@@ -41,7 +41,6 @@
 /* #define LPARCFG_DEBUG */
 
 static struct proc_dir_entry *proc_ppc64_lparcfg;
-#define LPARCFG_BUFF_SIZE 4096
 
 /*
  * Track sum of all purrs across all processors. This is used to further
@@ -595,13 +594,6 @@
        ent = create_proc_entry("ppc64/lparcfg", mode, NULL);
        if (ent) {
                ent->proc_fops = &lparcfg_fops;
-               ent->data = kmalloc(LPARCFG_BUFF_SIZE, GFP_KERNEL);
-               if (!ent->data) {
-                       printk(KERN_ERR
-                              "Failed to allocate buffer for lparcfg\n");
-                       remove_proc_entry("lparcfg", ent->parent);
-                       return -ENOMEM;
-               }
        } else {
                printk(KERN_ERR "Failed to create ppc64/lparcfg\n");
                return -EIO;
@@ -613,10 +605,8 @@
 
 void __exit lparcfg_cleanup(void)
 {
-       if (proc_ppc64_lparcfg) {
-               kfree(proc_ppc64_lparcfg->data);
+       if (proc_ppc64_lparcfg)
                remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
-       }
 }
 
 module_init(lparcfg_init);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/misc.S powerpc.git/arch/powerpc/kernel/misc.S
--- linux-2.6.24/arch/powerpc/kernel/misc.S     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/misc.S      2008-01-28 20:25:49.000000000 +0100
@@ -8,12 +8,17 @@
  * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
  * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
  *
+ * setjmp/longjmp code by Paul Mackerras.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
 #include <asm/ppc_asm.h>
+#include <asm/unistd.h>
+#include <asm/asm-compat.h>
+#include <asm/asm-offsets.h>
 
        .text
 
@@ -43,3 +48,71 @@
        add     r3,r3,r5
        mtlr    r0
        blr
+
+_GLOBAL(kernel_execve)
+       li      r0,__NR_execve
+       sc
+       bnslr
+       neg     r3,r3
+       blr
+
+_GLOBAL(setjmp)
+       mflr    r0
+       PPC_STL r0,0(r3)
+       PPC_STL r1,SZL(r3)
+       PPC_STL r2,2*SZL(r3)
+       mfcr    r0
+       PPC_STL r0,3*SZL(r3)
+       PPC_STL r13,4*SZL(r3)
+       PPC_STL r14,5*SZL(r3)
+       PPC_STL r15,6*SZL(r3)
+       PPC_STL r16,7*SZL(r3)
+       PPC_STL r17,8*SZL(r3)
+       PPC_STL r18,9*SZL(r3)
+       PPC_STL r19,10*SZL(r3)
+       PPC_STL r20,11*SZL(r3)
+       PPC_STL r21,12*SZL(r3)
+       PPC_STL r22,13*SZL(r3)
+       PPC_STL r23,14*SZL(r3)
+       PPC_STL r24,15*SZL(r3)
+       PPC_STL r25,16*SZL(r3)
+       PPC_STL r26,17*SZL(r3)
+       PPC_STL r27,18*SZL(r3)
+       PPC_STL r28,19*SZL(r3)
+       PPC_STL r29,20*SZL(r3)
+       PPC_STL r30,21*SZL(r3)
+       PPC_STL r31,22*SZL(r3)
+       li      r3,0
+       blr
+
+_GLOBAL(longjmp)
+       PPC_LCMPI r4,0
+       bne     1f
+       li      r4,1
+1:     PPC_LL  r13,4*SZL(r3)
+       PPC_LL  r14,5*SZL(r3)
+       PPC_LL  r15,6*SZL(r3)
+       PPC_LL  r16,7*SZL(r3)
+       PPC_LL  r17,8*SZL(r3)
+       PPC_LL  r18,9*SZL(r3)
+       PPC_LL  r19,10*SZL(r3)
+       PPC_LL  r20,11*SZL(r3)
+       PPC_LL  r21,12*SZL(r3)
+       PPC_LL  r22,13*SZL(r3)
+       PPC_LL  r23,14*SZL(r3)
+       PPC_LL  r24,15*SZL(r3)
+       PPC_LL  r25,16*SZL(r3)
+       PPC_LL  r26,17*SZL(r3)
+       PPC_LL  r27,18*SZL(r3)
+       PPC_LL  r28,19*SZL(r3)
+       PPC_LL  r29,20*SZL(r3)
+       PPC_LL  r30,21*SZL(r3)
+       PPC_LL  r31,22*SZL(r3)
+       PPC_LL  r0,3*SZL(r3)
+       mtcrf   0x38,r0
+       PPC_LL  r0,0(r3)
+       PPC_LL  r1,SZL(r3)
+       PPC_LL  r2,2*SZL(r3)
+       mtlr    r0
+       mr      r3,r4
+       blr
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/misc_32.S powerpc.git/arch/powerpc/kernel/misc_32.S
--- linux-2.6.24/arch/powerpc/kernel/misc_32.S  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/misc_32.S   2008-01-28 20:25:49.000000000 +0100
@@ -206,6 +206,45 @@
        isync
        blr                     /* Done */
 
+#ifdef CONFIG_40x
+
+/*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_readb)
+       mfmsr   r7
+       ori     r0,r7,MSR_DR
+       xori    r0,r0,MSR_DR
+       sync
+       mtmsr   r0
+       sync
+       isync
+       lbz     r3,0(r3)
+       sync
+       mtmsr   r7
+       sync
+       isync
+       blr
+
+       /*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_writeb)
+       mfmsr   r7
+       ori     r0,r7,MSR_DR
+       xori    r0,r0,MSR_DR
+       sync
+       mtmsr   r0
+       sync
+       isync
+       stb     r3,0(r4)
+       sync
+       mtmsr   r7
+       sync
+       isync
+       blr
+
+#endif /* CONFIG_40x */
 
 /*
  * Flush MMU TLB
@@ -793,13 +832,6 @@
        addi    r1,r1,16
        blr
 
-_GLOBAL(kernel_execve)
-       li      r0,__NR_execve
-       sc
-       bnslr
-       neg     r3,r3
-       blr
-
 /*
  * This routine is just here to keep GCC happy - sigh...
  */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/misc_64.S powerpc.git/arch/powerpc/kernel/misc_64.S
--- linux-2.6.24/arch/powerpc/kernel/misc_64.S  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/misc_64.S   2008-01-28 20:25:49.000000000 +0100
@@ -518,13 +518,6 @@
 
 #endif /* CONFIG_ALTIVEC */
 
-_GLOBAL(kernel_execve)
-       li      r0,__NR_execve
-       sc
-       bnslr
-       neg     r3,r3
-       blr
-
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/module_32.c powerpc.git/arch/powerpc/kernel/module_32.c
--- linux-2.6.24/arch/powerpc/kernel/module_32.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/module_32.c 2008-01-28 20:25:49.000000000 +0100
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/cache.h>
 #include <linux/bug.h>
+#include <linux/sort.h>
 
 #include "setup.h"
 
@@ -54,22 +55,60 @@
    addend) */
 static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
 {
-       unsigned int i, j, ret = 0;
+       unsigned int i, r_info, r_addend, _count_relocs;
 
-       /* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-       for (i = 0; i < num; i++) {
-               for (j = 0; j < i; j++) {
-                       /* If this addend appeared before, it's
-                           already been counted */
-                       if (ELF32_R_SYM(rela[i].r_info)
-                           == ELF32_R_SYM(rela[j].r_info)
-                           && rela[i].r_addend == rela[j].r_addend)
-                               break;
+       _count_relocs = 0;
+       r_info = 0;
+       r_addend = 0;
+       for (i = 0; i < num; i++)
+               /* Only count 24-bit relocs, others don't need stubs */
+               if (ELF32_R_TYPE(rela[i].r_info) == R_PPC_REL24 &&
+                   (r_info != ELF32_R_SYM(rela[i].r_info) ||
+                    r_addend != rela[i].r_addend)) {
+                       _count_relocs++;
+                       r_info = ELF32_R_SYM(rela[i].r_info);
+                       r_addend = rela[i].r_addend;
                }
-               if (j == i) ret++;
+
+       return _count_relocs;
+}
+
+static int relacmp(const void *_x, const void *_y)
+{
+       const Elf32_Rela *x, *y;
+
+       y = (Elf32_Rela *)_x;
+       x = (Elf32_Rela *)_y;
+
+       /* Compare the entire r_info (as opposed to ELF32_R_SYM(r_info) only) to
+        * make the comparison cheaper/faster. It won't affect the sorting or
+        * the counting algorithms' performance
+        */
+       if (x->r_info < y->r_info)
+               return -1;
+       else if (x->r_info > y->r_info)
+               return 1;
+       else if (x->r_addend < y->r_addend)
+               return -1;
+       else if (x->r_addend > y->r_addend)
+               return 1;
+       else
+               return 0;
+}
+
+static void relaswap(void *_x, void *_y, int size)
+{
+       uint32_t *x, *y, tmp;
+       int i;
+
+       y = (uint32_t *)_x;
+       x = (uint32_t *)_y;
+
+       for (i = 0; i < sizeof(Elf32_Rela) / sizeof(uint32_t); i++) {
+               tmp = x[i];
+               x[i] = y[i];
+               y[i] = tmp;
        }
-       return ret;
 }
 
 /* Get the potential trampolines size required of the init and
@@ -100,6 +139,16 @@
                        DEBUGP("Ptr: %p.  Number: %u\n",
                               (void *)hdr + sechdrs[i].sh_offset,
                               sechdrs[i].sh_size / sizeof(Elf32_Rela));
+
+                       /* Sort the relocation information based on a symbol and
+                        * addend key. This is a stable O(n*log n) complexity
+                        * alogrithm but it will reduce the complexity of
+                        * count_relocs() to linear complexity O(n)
+                        */
+                       sort((void *)hdr + sechdrs[i].sh_offset,
+                            sechdrs[i].sh_size / sizeof(Elf32_Rela),
+                            sizeof(Elf32_Rela), relacmp, relaswap);
+
                        ret += count_relocs((void *)hdr
                                             + sechdrs[i].sh_offset,
                                             sechdrs[i].sh_size
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/module_64.c powerpc.git/arch/powerpc/kernel/module_64.c
--- linux-2.6.24/arch/powerpc/kernel/module_64.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/module_64.c 2008-01-28 20:25:49.000000000 +0100
@@ -24,6 +24,7 @@
 #include <asm/module.h>
 #include <asm/uaccess.h>
 #include <asm/firmware.h>
+#include <linux/sort.h>
 
 #include "setup.h"
 
@@ -81,25 +82,23 @@
    different addend) */
 static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num)
 {
-       unsigned int i, j, ret = 0;
+       unsigned int i, r_info, r_addend, _count_relocs;
 
        /* FIXME: Only count external ones --RR */
-       /* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-       for (i = 0; i < num; i++) {
+       _count_relocs = 0;
+       r_info = 0;
+       r_addend = 0;
+       for (i = 0; i < num; i++)
                /* Only count 24-bit relocs, others don't need stubs */
-               if (ELF64_R_TYPE(rela[i].r_info) != R_PPC_REL24)
-                       continue;
-               for (j = 0; j < i; j++) {
-                       /* If this addend appeared before, it's
-                           already been counted */
-                       if (rela[i].r_info == rela[j].r_info
-                           && rela[i].r_addend == rela[j].r_addend)
-                               break;
+               if (ELF64_R_TYPE(rela[i].r_info) == R_PPC_REL24 &&
+                   (r_info != ELF64_R_SYM(rela[i].r_info) ||
+                    r_addend != rela[i].r_addend)) {
+                       _count_relocs++;
+                       r_info = ELF64_R_SYM(rela[i].r_info);
+                       r_addend = rela[i].r_addend;
                }
-               if (j == i) ret++;
-       }
-       return ret;
+
+       return _count_relocs;
 }
 
 void *module_alloc(unsigned long size)
@@ -118,6 +117,44 @@
            table entries. */
 }
 
+static int relacmp(const void *_x, const void *_y)
+{
+       const Elf64_Rela *x, *y;
+
+       y = (Elf64_Rela *)_x;
+       x = (Elf64_Rela *)_y;
+
+       /* Compare the entire r_info (as opposed to ELF64_R_SYM(r_info) only) to
+        * make the comparison cheaper/faster. It won't affect the sorting or
+        * the counting algorithms' performance
+        */
+       if (x->r_info < y->r_info)
+               return -1;
+       else if (x->r_info > y->r_info)
+               return 1;
+       else if (x->r_addend < y->r_addend)
+               return -1;
+       else if (x->r_addend > y->r_addend)
+               return 1;
+       else
+               return 0;
+}
+
+static void relaswap(void *_x, void *_y, int size)
+{
+       uint64_t *x, *y, tmp;
+       int i;
+
+       y = (uint64_t *)_x;
+       x = (uint64_t *)_y;
+
+       for (i = 0; i < sizeof(Elf64_Rela) / sizeof(uint64_t); i++) {
+               tmp = x[i];
+               x[i] = y[i];
+               y[i] = tmp;
+       }
+}
+
 /* Get size of potential trampolines required. */
 static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
                                    const Elf64_Shdr *sechdrs)
@@ -133,6 +170,16 @@
                        DEBUGP("Ptr: %p.  Number: %lu\n",
                               (void *)sechdrs[i].sh_addr,
                               sechdrs[i].sh_size / sizeof(Elf64_Rela));
+
+                       /* Sort the relocation information based on a symbol and
+                        * addend key. This is a stable O(n*log n) complexity
+                        * alogrithm but it will reduce the complexity of
+                        * count_relocs() to linear complexity O(n)
+                        */
+                       sort((void *)sechdrs[i].sh_addr,
+                            sechdrs[i].sh_size / sizeof(Elf64_Rela),
+                            sizeof(Elf64_Rela), relacmp, relaswap);
+
                        relocs += count_relocs((void *)sechdrs[i].sh_addr,
                                               sechdrs[i].sh_size
                                               / sizeof(Elf64_Rela));
@@ -343,7 +390,7 @@
                        /* Simply set it */
                        *(u32 *)location = value;
                        break;
-                       
+
                case R_PPC64_ADDR64:
                        /* Simply set it */
                        *(unsigned long *)location = value;
@@ -399,7 +446,7 @@
                        }
 
                        /* Only replace bits 2 through 26 */
-                       *(uint32_t *)location 
+                       *(uint32_t *)location
                                = (*(uint32_t *)location & ~0x03fffffc)
                                | (value & 0x03fffffc);
                        break;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/of_device.c powerpc.git/arch/powerpc/kernel/of_device.c
--- linux-2.6.24/arch/powerpc/kernel/of_device.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/of_device.c 2008-01-28 20:25:49.000000000 +0100
@@ -5,10 +5,10 @@
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
+#include <linux/of_device.h>
 
 #include <asm/errno.h>
 #include <asm/dcr.h>
-#include <asm/of_device.h>
 
 static void of_device_make_bus_id(struct of_device *dev)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/of_platform.c powerpc.git/arch/powerpc/kernel/of_platform.c
--- linux-2.6.24/arch/powerpc/kernel/of_platform.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/of_platform.c       2008-01-28 20:25:49.000000000 +0100
@@ -19,6 +19,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
@@ -40,7 +41,7 @@
  * a bus type in the list
  */
 
-static struct of_device_id of_default_bus_ids[] = {
+static const struct of_device_id of_default_bus_ids[] = {
        { .type = "soc", },
        { .compatible = "soc", },
        { .type = "spider", },
@@ -64,26 +65,6 @@
 
 postcore_initcall(of_bus_driver_init);
 
-int of_register_platform_driver(struct of_platform_driver *drv)
-{
-       /* initialize common driver fields */
-       if (!drv->driver.name)
-               drv->driver.name = drv->name;
-       if (!drv->driver.owner)
-               drv->driver.owner = drv->owner;
-       drv->driver.bus = &of_platform_bus_type;
-
-       /* register with core */
-       return driver_register(&drv->driver);
-}
-EXPORT_SYMBOL(of_register_platform_driver);
-
-void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
-       driver_unregister(&drv->driver);
-}
-EXPORT_SYMBOL(of_unregister_platform_driver);
-
 struct of_device* of_platform_device_create(struct device_node *np,
                                            const char *bus_id,
                                            struct device *parent)
@@ -120,15 +101,15 @@
  * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to
  * disallow recursive creation of child busses
  */
-static int of_platform_bus_create(struct device_node *bus,
-                                 struct of_device_id *matches,
+static int of_platform_bus_create(const struct device_node *bus,
+                                 const struct of_device_id *matches,
                                  struct device *parent)
 {
        struct device_node *child;
        struct of_device *dev;
        int rc = 0;
 
-       for (child = NULL; (child = of_get_next_child(bus, child)); ) {
+       for_each_child_of_node(bus, child) {
                pr_debug("   create child: %s\n", child->full_name);
                dev = of_platform_device_create(child, NULL, parent);
                if (dev == NULL)
@@ -157,7 +138,7 @@
  */
 
 int of_platform_bus_probe(struct device_node *root,
-                         struct of_device_id *matches,
+                         const struct of_device_id *matches,
                          struct device *parent)
 {
        struct device_node *child;
@@ -190,7 +171,7 @@
                rc = of_platform_bus_create(root, matches, &dev->dev);
                goto bail;
        }
-       for (child = NULL; (child = of_get_next_child(root, child)); ) {
+       for_each_child_of_node(root, child) {
                if (!of_match_node(matches, child))
                        continue;
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/pci-common.c powerpc.git/arch/powerpc/kernel/pci-common.c
--- linux-2.6.24/arch/powerpc/kernel/pci-common.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/pci-common.c        2008-01-28 20:25:49.000000000 +0100
@@ -48,32 +48,26 @@
 static DEFINE_SPINLOCK(hose_spinlock);
 
 /* XXX kill that some day ... */
-int global_phb_number;         /* Global phb counter */
+static int global_phb_number;          /* Global phb counter */
 
-extern struct list_head hose_list;
+/* ISA Memory physical address */
+resource_size_t isa_mem_base;
 
-/*
- * pci_controller(phb) initialized common variables.
- */
-static void __devinit pci_setup_pci_controller(struct pci_controller *hose)
-{
-       memset(hose, 0, sizeof(struct pci_controller));
-
-       spin_lock(&hose_spinlock);
-       hose->global_number = global_phb_number++;
-       list_add_tail(&hose->list_node, &hose_list);
-       spin_unlock(&hose_spinlock);
-}
+/* Default PCI flags is 0 */
+unsigned int ppc_pci_flags;
 
-struct pci_controller * pcibios_alloc_controller(struct device_node *dev)
+struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
 {
        struct pci_controller *phb;
 
-       phb = alloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
+       phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
        if (phb == NULL)
                return NULL;
-       pci_setup_pci_controller(phb);
-       phb->arch_data = dev;
+       spin_lock(&hose_spinlock);
+       phb->global_number = global_phb_number++;
+       list_add_tail(&phb->list_node, &hose_list);
+       spin_unlock(&hose_spinlock);
+       phb->dn = dev;
        phb->is_dynamic = mem_init_done;
 #ifdef CONFIG_PPC64
        if (dev) {
@@ -126,15 +120,10 @@
  */
 int pci_domain_nr(struct pci_bus *bus)
 {
-       if (firmware_has_feature(FW_FEATURE_ISERIES))
-               return 0;
-       else {
-               struct pci_controller *hose = pci_bus_to_host(bus);
+       struct pci_controller *hose = pci_bus_to_host(bus);
 
-               return hose->global_number;
-       }
+       return hose->global_number;
 }
-
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PPC_OF
@@ -153,7 +142,7 @@
        while(node) {
                struct pci_controller *hose, *tmp;
                list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
-                       if (hose->arch_data == node)
+                       if (hose->dn == node)
                                return hose;
                node = node->parent;
        }
@@ -201,6 +190,20 @@
        struct of_irq oirq;
        unsigned int virq;
 
+       /* The current device-tree that iSeries generates from the HV
+        * PCI informations doesn't contain proper interrupt routing,
+        * and all the fallback would do is print out crap, so we
+        * don't attempt to resolve the interrupts here at all, some
+        * iSeries specific fixup does it.
+        *
+        * In the long run, we will hopefully fix the generated device-tree
+        * instead.
+        */
+#ifdef CONFIG_PPC_ISERIES
+       if (firmware_has_feature(FW_FEATURE_ISERIES))
+               return -1;
+#endif
+
        DBG("Try to map irq for %s...\n", pci_name(pci_dev));
 
 #ifdef DEBUG
@@ -222,10 +225,11 @@
                if (pin == 0)
                        return -1;
                if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
-                   line == 0xff) {
+                   line == 0xff || line == 0) {
                        return -1;
                }
-               DBG(" -> no map ! Using irq line %d from PCI config\n", line);
+               DBG(" -> no map ! Using line %d (pin %d) from PCI config\n",
+                   line, pin);
 
                virq = irq_create_mapping(NULL, line);
                if (virq != NO_IRQ)
@@ -475,3 +479,717 @@
        *start = rsrc->start - offset;
        *end = rsrc->end - offset;
 }
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - We can only cope with all memory ranges having the same offset
+ *     between CPU addresses and PCI addresses. Unfortunately, some bridges
+ *     are setup for a large 1:1 mapping along with a small "window" which
+ *     maps PCI address 0 to some arbitrary high address of the CPU space in
+ *     order to give access to the ISA memory hole.
+ *     The way out of here that I've chosen for now is to always set the
+ *     offset based on the first resource found, then override it if we
+ *     have a different offset and the previous was set by an ISA hole.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
+                                           struct device_node *dev,
+                                           int primary)
+{
+       const u32 *ranges;
+       int rlen;
+       int pna = of_n_addr_cells(dev);
+       int np = pna + 5;
+       int memno = 0, isa_hole = -1;
+       u32 pci_space;
+       unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+       unsigned long long isa_mb = 0;
+       struct resource *res;
+
+       printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
+              dev->full_name, primary ? "(primary)" : "");
+
+       /* Get ranges property */
+       ranges = of_get_property(dev, "ranges", &rlen);
+       if (ranges == NULL)
+               return;
+
+       /* Parse it */
+       while ((rlen -= np * 4) >= 0) {
+               /* Read next ranges element */
+               pci_space = ranges[0];
+               pci_addr = of_read_number(ranges + 1, 2);
+               cpu_addr = of_translate_address(dev, ranges + 3);
+               size = of_read_number(ranges + pna + 3, 2);
+               ranges += np;
+               if (cpu_addr == OF_BAD_ADDR || size == 0)
+                       continue;
+
+               /* Now consume following elements while they are contiguous */
+               for (; rlen >= np * sizeof(u32);
+                    ranges += np, rlen -= np * 4) {
+                       if (ranges[0] != pci_space)
+                               break;
+                       pci_next = of_read_number(ranges + 1, 2);
+                       cpu_next = of_translate_address(dev, ranges + 3);
+                       if (pci_next != pci_addr + size ||
+                           cpu_next != cpu_addr + size)
+                               break;
+                       size += of_read_number(ranges + pna + 3, 2);
+               }
+
+               /* Act based on address space type */
+               res = NULL;
+               switch ((pci_space >> 24) & 0x3) {
+               case 1:         /* PCI IO space */
+                       printk(KERN_INFO
+                              "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+                              cpu_addr, cpu_addr + size - 1, pci_addr);
+
+                       /* We support only one IO range */
+                       if (hose->pci_io_size) {
+                               printk(KERN_INFO
+                                      " \\--> Skipped (too many) !\n");
+                               continue;
+                       }
+#ifdef CONFIG_PPC32
+                       /* On 32 bits, limit I/O space to 16MB */
+                       if (size > 0x01000000)
+                               size = 0x01000000;
+
+                       /* 32 bits needs to map IOs here */
+                       hose->io_base_virt = ioremap(cpu_addr, size);
+
+                       /* Expect trouble if pci_addr is not 0 */
+                       if (primary)
+                               isa_io_base =
+                                       (unsigned long)hose->io_base_virt;
+#endif /* CONFIG_PPC32 */
+                       /* pci_io_size and io_base_phys always represent IO
+                        * space starting at 0 so we factor in pci_addr
+                        */
+                       hose->pci_io_size = pci_addr + size;
+                       hose->io_base_phys = cpu_addr - pci_addr;
+
+                       /* Build resource */
+                       res = &hose->io_resource;
+                       res->flags = IORESOURCE_IO;
+                       res->start = pci_addr;
+                       break;
+               case 2:         /* PCI Memory space */
+                       printk(KERN_INFO
+                              " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+                              cpu_addr, cpu_addr + size - 1, pci_addr,
+                              (pci_space & 0x40000000) ? "Prefetch" : "");
+
+                       /* We support only 3 memory ranges */
+                       if (memno >= 3) {
+                               printk(KERN_INFO
+                                      " \\--> Skipped (too many) !\n");
+                               continue;
+                       }
+                       /* Handles ISA memory hole space here */
+                       if (pci_addr == 0) {
+                               isa_mb = cpu_addr;
+                               isa_hole = memno;
+                               if (primary || isa_mem_base == 0)
+                                       isa_mem_base = cpu_addr;
+                       }
+
+                       /* We get the PCI/Mem offset from the first range or
+                        * the, current one if the offset came from an ISA
+                        * hole. If they don't match, bugger.
+                        */
+                       if (memno == 0 ||
+                           (isa_hole >= 0 && pci_addr != 0 &&
+                            hose->pci_mem_offset == isa_mb))
+                               hose->pci_mem_offset = cpu_addr - pci_addr;
+                       else if (pci_addr != 0 &&
+                                hose->pci_mem_offset != cpu_addr - pci_addr) {
+                               printk(KERN_INFO
+                                      " \\--> Skipped (offset mismatch) !\n");
+                               continue;
+                       }
+
+                       /* Build resource */
+                       res = &hose->mem_resources[memno++];
+                       res->flags = IORESOURCE_MEM;
+                       if (pci_space & 0x40000000)
+                               res->flags |= IORESOURCE_PREFETCH;
+                       res->start = cpu_addr;
+                       break;
+               }
+               if (res != NULL) {
+                       res->name = dev->full_name;
+                       res->end = res->start + size - 1;
+                       res->parent = NULL;
+                       res->sibling = NULL;
+                       res->child = NULL;
+               }
+       }
+
+       /* Out of paranoia, let's put the ISA hole last if any */
+       if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) {
+               struct resource tmp = hose->mem_resources[isa_hole];
+               hose->mem_resources[isa_hole] = hose->mem_resources[memno-1];
+               hose->mem_resources[memno-1] = tmp;
+       }
+}
+
+/* Decide whether to display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+       struct pci_controller *hose = pci_bus_to_host(bus);
+#ifdef CONFIG_PPC64
+       return hose->buid != 0;
+#else
+       if (!(ppc_pci_flags & PPC_PCI_ENABLE_PROC_DOMAINS))
+               return 0;
+       if (ppc_pci_flags & PPC_PCI_COMPAT_DOMAIN_0)
+               return hose->global_number != 0;
+       return 1;
+#endif
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+                            struct resource *res)
+{
+       resource_size_t offset = 0, mask = (resource_size_t)-1;
+       struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+       if (!hose)
+               return;
+       if (res->flags & IORESOURCE_IO) {
+               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+               mask = 0xffffffffu;
+       } else if (res->flags & IORESOURCE_MEM)
+               offset = hose->pci_mem_offset;
+
+       region->start = (res->start - offset) & mask;
+       region->end = (res->end - offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+                            struct pci_bus_region *region)
+{
+       resource_size_t offset = 0, mask = (resource_size_t)-1;
+       struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+       if (!hose)
+               return;
+       if (res->flags & IORESOURCE_IO) {
+               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+               mask = 0xffffffffu;
+       } else if (res->flags & IORESOURCE_MEM)
+               offset = hose->pci_mem_offset;
+       res->start = (region->start + offset) & mask;
+       res->end = (region->end + offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/* Fixup a bus resource into a linux resource */
+static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
+{
+       struct pci_controller *hose = pci_bus_to_host(dev->bus);
+       resource_size_t offset = 0, mask = (resource_size_t)-1;
+
+       if (res->flags & IORESOURCE_IO) {
+               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+               mask = 0xffffffffu;
+       } else if (res->flags & IORESOURCE_MEM)
+               offset = hose->pci_mem_offset;
+
+       res->start = (res->start + offset) & mask;
+       res->end = (res->end + offset) & mask;
+
+       pr_debug("PCI:%s            %016llx-%016llx\n",
+                pci_name(dev),
+                (unsigned long long)res->start,
+                (unsigned long long)res->end);
+}
+
+
+/* This header fixup will do the resource fixup for all devices as they are
+ * probed, but not for bridge ranges
+ */
+static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
+{
+       struct pci_controller *hose = pci_bus_to_host(dev->bus);
+       int i;
+
+       if (!hose) {
+               printk(KERN_ERR "No host bridge for PCI dev %s !\n",
+                      pci_name(dev));
+               return;
+       }
+       for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+               struct resource *res = dev->resource + i;
+               if (!res->flags)
+                       continue;
+               if (res->end == 0xffffffff) {
+                       pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
+                                pci_name(dev), i,
+                                (unsigned long long)res->start,
+                                (unsigned long long)res->end,
+                                (unsigned int)res->flags);
+                       res->end -= res->start;
+                       res->start = 0;
+                       res->flags |= IORESOURCE_UNSET;
+                       continue;
+               }
+
+               pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n",
+                        pci_name(dev), i,
+                        (unsigned long long)res->start,\
+                        (unsigned long long)res->end,
+                        (unsigned int)res->flags);
+
+               fixup_resource(res, dev);
+       }
+
+       /* Call machine specific resource fixup */
+       if (ppc_md.pcibios_fixup_resources)
+               ppc_md.pcibios_fixup_resources(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
+{
+       struct pci_controller *hose = pci_bus_to_host(bus);
+       struct pci_dev *dev = bus->self;
+
+       pr_debug("PCI: Fixup bus %d (%s)\n", bus->number, dev ? pci_name(dev) : "PHB");
+
+       /* Fixup PCI<->PCI bridges. Host bridges are handled separately, for
+        * now differently between 32 and 64 bits.
+        */
+       if (dev != NULL) {
+               struct resource *res;
+               int i;
+
+               for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+                       if ((res = bus->resource[i]) == NULL)
+                               continue;
+                       if (!res->flags)
+                               continue;
+                       if (i >= 3 && bus->self->transparent)
+                               continue;
+                       /* On PowerMac, Apple leaves bridge windows open over
+                        * an inaccessible region of memory space (0...fffff)
+                        * which is somewhat bogus, but that's what they think
+                        * means disabled...
+                        *
+                        * We clear those to force them to be reallocated later
+                        *
+                        * We detect such regions by the fact that the base is
+                        * equal to the pci_mem_offset of the host bridge and
+                        * their size is smaller than 1M.
+                        */
+                       if (res->flags & IORESOURCE_MEM &&
+                           res->start == hose->pci_mem_offset &&
+                           res->end < 0x100000) {
+                               printk(KERN_INFO
+                                      "PCI: Closing bogus Apple Firmware"
+                                      " region %d on bus 0x%02x\n",
+                                      i, bus->number);
+                               res->flags = 0;
+                               continue;
+                       }
+
+                       pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
+                                pci_name(dev), i,
+                                (unsigned long long)res->start,\
+                                (unsigned long long)res->end,
+                                (unsigned int)res->flags);
+
+                       fixup_resource(res, dev);
+               }
+       }
+
+       /* Additional setup that is different between 32 and 64 bits for now */
+       pcibios_do_bus_setup(bus);
+
+       /* Platform specific bus fixups */
+       if (ppc_md.pcibios_fixup_bus)
+               ppc_md.pcibios_fixup_bus(bus);
+
+       /* Read default IRQs and fixup if necessary */
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               pci_read_irq_line(dev);
+               if (ppc_md.pci_irq_fixup)
+                       ppc_md.pci_irq_fixup(dev);
+       }
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+       /* When called from the generic PCI probe, read PCI<->PCI bridge
+        * bases before proceeding
+        */
+       if (bus->self != NULL)
+               pci_read_bridge_bases(bus);
+       __pcibios_fixup_bus(bus);
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
+
+/* When building a bus from the OF tree rather than probing, we need a
+ * slightly different version of the fixup which doesn't read the
+ * bridge bases using config space accesses
+ */
+void __devinit pcibios_fixup_of_probed_bus(struct pci_bus *bus)
+{
+       __pcibios_fixup_bus(bus);
+}
+
+static int skip_isa_ioresource_align(struct pci_dev *dev)
+{
+       if ((ppc_pci_flags & PPC_PCI_CAN_SKIP_ISA_ALIGN) &&
+           !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
+               return 1;
+       return 0;
+}
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+                               resource_size_t size, resource_size_t align)
+{
+       struct pci_dev *dev = data;
+
+       if (res->flags & IORESOURCE_IO) {
+               resource_size_t start = res->start;
+
+               if (skip_isa_ioresource_align(dev))
+                       return;
+               if (start & 0x300) {
+                       start = (start + 0x3ff) & ~0x3ff;
+                       res->start = start;
+               }
+       }
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init reparent_resources(struct resource *parent,
+                                    struct resource *res)
+{
+       struct resource *p, **pp;
+       struct resource **firstpp = NULL;
+
+       for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+               if (p->end < res->start)
+                       continue;
+               if (res->end < p->start)
+                       break;
+               if (p->start < res->start || p->end > res->end)
+                       return -1;      /* not completely contained */
+               if (firstpp == NULL)
+                       firstpp = pp;
+       }
+       if (firstpp == NULL)
+               return -1;      /* didn't find any conflicting entries? */
+       res->parent = parent;
+       res->child = *firstpp;
+       res->sibling = *pp;
+       *firstpp = res;
+       *pp = NULL;
+       for (p = res->child; p != NULL; p = p->sibling) {
+               p->parent = res;
+               DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
+                   p->name,
+                   (unsigned long long)p->start,
+                   (unsigned long long)p->end, res->name);
+       }
+       return 0;
+}
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *     - I/O or memory regions not configured
+ *     - regions configured, but not enabled in the command register
+ *     - bogus I/O addresses above 64K used
+ *     - expansion ROMs left enabled (this may sound harmless, but given
+ *       the fact the PCI specs explicitly allow address decoders to be
+ *       shared between expansion ROMs and other resource regions, it's
+ *       at least dangerous)
+ *
+ *  Our solution:
+ *     (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *         This gives us fixed barriers on where we can allocate.
+ *     (2) Allocate resources for all enabled devices.  If there is
+ *         a collision, just mark the resource as unallocated. Also
+ *         disable expansion ROMs during this step.
+ *     (3) Try to allocate resources for disabled devices.  If the
+ *         resources were assigned correctly, everything goes well,
+ *         if they weren't, they won't disturb allocation of other
+ *         resources.
+ *     (4) Assign new addresses to resources which were either
+ *         not configured at all or misconfigured.  If explicitly
+ *         requested by the user, configure expansion ROM address
+ *         as well.
+ */
+
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+       struct pci_bus *bus;
+       int i;
+       struct resource *res, *pr;
+
+       /* Depth-First Search on bus tree */
+       list_for_each_entry(bus, bus_list, node) {
+               for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+                       if ((res = bus->resource[i]) == NULL || !res->flags
+                           || res->start > res->end)
+                               continue;
+                       if (bus->parent == NULL)
+                               pr = (res->flags & IORESOURCE_IO) ?
+                                       &ioport_resource : &iomem_resource;
+                       else {
+                               /* Don't bother with non-root busses when
+                                * re-assigning all resources. We clear the
+                                * resource flags as if they were colliding
+                                * and as such ensure proper re-allocation
+                                * later.
+                                */
+                               if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)
+                                       goto clear_resource;
+                               pr = pci_find_parent_resource(bus->self, res);
+                               if (pr == res) {
+                                       /* this happens when the generic PCI
+                                        * code (wrongly) decides that this
+                                        * bridge is transparent  -- paulus
+                                        */
+                                       continue;
+                               }
+                       }
+
+                       DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+                           "[0x%x], parent %p (%s)\n",
+                           bus->self ? pci_name(bus->self) : "PHB",
+                           bus->number, i,
+                           (unsigned long long)res->start,
+                           (unsigned long long)res->end,
+                           (unsigned int)res->flags,
+                           pr, (pr && pr->name) ? pr->name : "nil");
+
+                       if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+                               if (request_resource(pr, res) == 0)
+                                       continue;
+                               /*
+                                * Must be a conflict with an existing entry.
+                                * Move that entry (or entries) under the
+                                * bridge resource and try again.
+                                */
+                               if (reparent_resources(pr, res) == 0)
+                                       continue;
+                       }
+                       printk(KERN_WARNING
+                              "PCI: Cannot allocate resource region "
+                              "%d of PCI bridge %d, will remap\n",
+                              i, bus->number);
+clear_resource:
+                       res->flags = 0;
+               }
+               pcibios_allocate_bus_resources(&bus->children);
+       }
+}
+
+static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
+{
+       struct resource *pr, *r = &dev->resource[idx];
+
+       DBG("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
+           pci_name(dev), idx,
+           (unsigned long long)r->start,
+           (unsigned long long)r->end,
+           (unsigned int)r->flags);
+
+       pr = pci_find_parent_resource(dev, r);
+       if (!pr || (pr->flags & IORESOURCE_UNSET) ||
+           request_resource(pr, r) < 0) {
+               printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
+                      " of device %s, will remap\n", idx, pci_name(dev));
+               if (pr)
+                       DBG("PCI:  parent is %p: %016llx-%016llx [%x]\n", pr,
+                           (unsigned long long)pr->start,
+                           (unsigned long long)pr->end,
+                           (unsigned int)pr->flags);
+               /* We'll assign a new address later */
+               r->flags |= IORESOURCE_UNSET;
+               r->end -= r->start;
+               r->start = 0;
+       }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+       struct pci_dev *dev = NULL;
+       int idx, disabled;
+       u16 command;
+       struct resource *r;
+
+       for_each_pci_dev(dev) {
+               pci_read_config_word(dev, PCI_COMMAND, &command);
+               for (idx = 0; idx < 6; idx++) {
+                       r = &dev->resource[idx];
+                       if (r->parent)          /* Already allocated */
+                               continue;
+                       if (!r->flags || (r->flags & IORESOURCE_UNSET))
+                               continue;       /* Not assigned at all */
+                       if (r->flags & IORESOURCE_IO)
+                               disabled = !(command & PCI_COMMAND_IO);
+                       else
+                               disabled = !(command & PCI_COMMAND_MEMORY);
+                       if (pass == disabled)
+                               alloc_resource(dev, idx);
+               }
+               if (pass)
+                       continue;
+               r = &dev->resource[PCI_ROM_RESOURCE];
+               if (r->flags & IORESOURCE_ROM_ENABLE) {
+                       /* Turn the ROM off, leave the resource region,
+                        * but keep it unregistered.
+                        */
+                       u32 reg;
+                       DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+                       r->flags &= ~IORESOURCE_ROM_ENABLE;
+                       pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+                       pci_write_config_dword(dev, dev->rom_base_reg,
+                                              reg & ~PCI_ROM_ADDRESS_ENABLE);
+               }
+       }
+}
+
+void __init pcibios_resource_survey(void)
+{
+       /* Allocate and assign resources. If we re-assign everything, then
+        * we skip the allocate phase
+        */
+       pcibios_allocate_bus_resources(&pci_root_buses);
+
+       if (!(ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)) {
+               pcibios_allocate_resources(0);
+               pcibios_allocate_resources(1);
+       }
+
+       if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
+               DBG("PCI: Assigning unassigned resouces...\n");
+               pci_assign_unassigned_resources();
+       }
+
+       /* Call machine dependent fixup */
+       if (ppc_md.pcibios_fixup)
+               ppc_md.pcibios_fixup();
+}
+
+#ifdef CONFIG_HOTPLUG
+/* This is used by the pSeries hotplug driver to allocate resource
+ * of newly plugged busses. We can try to consolidate with the
+ * rest of the code later, for now, keep it as-is
+ */
+void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
+{
+       struct pci_dev *dev;
+       struct pci_bus *child_bus;
+
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               int i;
+
+               for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+                       struct resource *r = &dev->resource[i];
+
+                       if (r->parent || !r->start || !r->flags)
+                               continue;
+                       pci_claim_resource(dev, i);
+               }
+       }
+
+       list_for_each_entry(child_bus, &bus->children, node)
+               pcibios_claim_one_bus(child_bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
+#endif /* CONFIG_HOTPLUG */
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+       u16 cmd, old_cmd;
+       int idx;
+       struct resource *r;
+
+       if (ppc_md.pcibios_enable_device_hook)
+               if (ppc_md.pcibios_enable_device_hook(dev))
+                       return -EINVAL;
+
+       pci_read_config_word(dev, PCI_COMMAND, &cmd);
+       old_cmd = cmd;
+       for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
+               /* Only set up the requested stuff */
+               if (!(mask & (1 << idx)))
+                       continue;
+               r = &dev->resource[idx];
+               if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+                       continue;
+               if ((idx == PCI_ROM_RESOURCE) &&
+                               (!(r->flags & IORESOURCE_ROM_ENABLE)))
+                       continue;
+               if (r->parent == NULL) {
+                       printk(KERN_ERR "PCI: Device %s not available because"
+                              " of resource collisions\n", pci_name(dev));
+                       return -EINVAL;
+               }
+               if (r->flags & IORESOURCE_IO)
+                       cmd |= PCI_COMMAND_IO;
+               if (r->flags & IORESOURCE_MEM)
+                       cmd |= PCI_COMMAND_MEMORY;
+       }
+       if (cmd != old_cmd) {
+               printk("PCI: Enabling device %s (%04x -> %04x)\n",
+                      pci_name(dev), old_cmd, cmd);
+               pci_write_config_word(dev, PCI_COMMAND, cmd);
+       }
+       return 0;
+}
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/pci_32.c powerpc.git/arch/powerpc/kernel/pci_32.c
--- linux-2.6.24/arch/powerpc/kernel/pci_32.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/pci_32.c    2008-01-28 20:25:49.000000000 +0100
@@ -13,6 +13,7 @@
 #include <linux/bootmem.h>
 #include <linux/irq.h>
 #include <linux/list.h>
+#include <linux/of.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -32,19 +33,12 @@
 #endif
 
 unsigned long isa_io_base     = 0;
-unsigned long isa_mem_base    = 0;
 unsigned long pci_dram_offset = 0;
 int pcibios_assign_bus_offset = 1;
 
 void pcibios_make_OF_bus_map(void);
 
-static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
-static int probe_resource(struct pci_bus *parent, struct resource *pr,
-                         struct resource *res, struct resource **conflict);
-static void update_bridge_base(struct pci_bus *bus, int i);
-static void pcibios_fixup_resources(struct pci_dev* dev);
 static void fixup_broken_pcnet32(struct pci_dev* dev);
-static int reparent_resources(struct resource *parent, struct resource *res);
 static void fixup_cpc710_pci64(struct pci_dev* dev);
 #ifdef CONFIG_PPC_OF
 static u8* pci_to_OF_bus_map;
@@ -53,7 +47,7 @@
 /* By default, we don't re-assign bus numbers. We do this only on
  * some pmacs
  */
-int pci_assign_all_buses;
+static int pci_assign_all_buses;
 
 LIST_HEAD(hose_list);
 
@@ -100,505 +94,6 @@
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,    PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
 
-static void
-pcibios_fixup_resources(struct pci_dev *dev)
-{
-       struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
-       int i;
-       unsigned long offset;
-
-       if (!hose) {
-               printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
-               return;
-       }
-       for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-               struct resource *res = dev->resource + i;
-               if (!res->flags)
-                       continue;
-               if (res->end == 0xffffffff) {
-                       DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n",
-                           pci_name(dev), i, (u64)res->start, (u64)res->end);
-                       res->end -= res->start;
-                       res->start = 0;
-                       res->flags |= IORESOURCE_UNSET;
-                       continue;
-               }
-               offset = 0;
-               if (res->flags & IORESOURCE_MEM) {
-                       offset = hose->pci_mem_offset;
-               } else if (res->flags & IORESOURCE_IO) {
-                       offset = (unsigned long) hose->io_base_virt
-                               - isa_io_base;
-               }
-               if (offset != 0) {
-                       res->start += offset;
-                       res->end += offset;
-                       DBG("Fixup res %d (%lx) of dev %s: %llx -> %llx\n",
-                           i, res->flags, pci_name(dev),
-                           (u64)res->start - offset, (u64)res->start);
-               }
-       }
-
-       /* Call machine specific resource fixup */
-       if (ppc_md.pcibios_fixup_resources)
-               ppc_md.pcibios_fixup_resources(dev);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID,           PCI_ANY_ID,                     pcibios_fixup_resources);
-
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-                       struct resource *res)
-{
-       unsigned long offset = 0;
-       struct pci_controller *hose = dev->sysdata;
-
-       if (hose && res->flags & IORESOURCE_IO)
-               offset = (unsigned long)hose->io_base_virt - isa_io_base;
-       else if (hose && res->flags & IORESOURCE_MEM)
-               offset = hose->pci_mem_offset;
-       region->start = res->start - offset;
-       region->end = res->end - offset;
-}
-EXPORT_SYMBOL(pcibios_resource_to_bus);
-
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-                            struct pci_bus_region *region)
-{
-       unsigned long offset = 0;
-       struct pci_controller *hose = dev->sysdata;
-
-       if (hose && res->flags & IORESOURCE_IO)
-               offset = (unsigned long)hose->io_base_virt - isa_io_base;
-       else if (hose && res->flags & IORESOURCE_MEM)
-               offset = hose->pci_mem_offset;
-       res->start = region->start + offset;
-       res->end = region->end + offset;
-}
-EXPORT_SYMBOL(pcibios_bus_to_resource);
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-void pcibios_align_resource(void *data, struct resource *res,
-                               resource_size_t size, resource_size_t align)
-{
-       struct pci_dev *dev = data;
-
-       if (res->flags & IORESOURCE_IO) {
-               resource_size_t start = res->start;
-
-               if (size > 0x100) {
-                       printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-                              " (%lld bytes)\n", pci_name(dev),
-                              dev->resource - res, (unsigned long long)size);
-               }
-
-               if (start & 0x300) {
-                       start = (start + 0x3ff) & ~0x3ff;
-                       res->start = start;
-               }
-       }
-}
-EXPORT_SYMBOL(pcibios_align_resource);
-
-/*
- *  Handle resources of PCI devices.  If the world were perfect, we could
- *  just allocate all the resource regions and do nothing more.  It isn't.
- *  On the other hand, we cannot just re-allocate all devices, as it would
- *  require us to know lots of host bridge internals.  So we attempt to
- *  keep as much of the original configuration as possible, but tweak it
- *  when it's found to be wrong.
- *
- *  Known BIOS problems we have to work around:
- *     - I/O or memory regions not configured
- *     - regions configured, but not enabled in the command register
- *     - bogus I/O addresses above 64K used
- *     - expansion ROMs left enabled (this may sound harmless, but given
- *       the fact the PCI specs explicitly allow address decoders to be
- *       shared between expansion ROMs and other resource regions, it's
- *       at least dangerous)
- *
- *  Our solution:
- *     (1) Allocate resources for all buses behind PCI-to-PCI bridges.
- *         This gives us fixed barriers on where we can allocate.
- *     (2) Allocate resources for all enabled devices.  If there is
- *         a collision, just mark the resource as unallocated. Also
- *         disable expansion ROMs during this step.
- *     (3) Try to allocate resources for disabled devices.  If the
- *         resources were assigned correctly, everything goes well,
- *         if they weren't, they won't disturb allocation of other
- *         resources.
- *     (4) Assign new addresses to resources which were either
- *         not configured at all or misconfigured.  If explicitly
- *         requested by the user, configure expansion ROM address
- *         as well.
- */
-
-static void __init
-pcibios_allocate_bus_resources(struct list_head *bus_list)
-{
-       struct pci_bus *bus;
-       int i;
-       struct resource *res, *pr;
-
-       /* Depth-First Search on bus tree */
-       list_for_each_entry(bus, bus_list, node) {
-               for (i = 0; i < 4; ++i) {
-                       if ((res = bus->resource[i]) == NULL || !res->flags
-                           || res->start > res->end)
-                               continue;
-                       if (bus->parent == NULL)
-                               pr = (res->flags & IORESOURCE_IO)?
-                                       &ioport_resource: &iomem_resource;
-                       else {
-                               pr = pci_find_parent_resource(bus->self, res);
-                               if (pr == res) {
-                                       /* this happens when the generic PCI
-                                        * code (wrongly) decides that this
-                                        * bridge is transparent  -- paulus
-                                        */
-                                       continue;
-                               }
-                       }
-
-                       DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n",
-                           (u64)res->start, (u64)res->end, res->flags, pr);
-                       if (pr) {
-                               if (request_resource(pr, res) == 0)
-                                       continue;
-                               /*
-                                * Must be a conflict with an existing entry.
-                                * Move that entry (or entries) under the
-                                * bridge resource and try again.
-                                */
-                               if (reparent_resources(pr, res) == 0)
-                                       continue;
-                       }
-                       printk(KERN_ERR "PCI: Cannot allocate resource region "
-                              "%d of PCI bridge %d\n", i, bus->number);
-                       if (pci_relocate_bridge_resource(bus, i))
-                               bus->resource[i] = NULL;
-               }
-               pcibios_allocate_bus_resources(&bus->children);
-       }
-}
-
-/*
- * Reparent resource children of pr that conflict with res
- * under res, and make res replace those children.
- */
-static int __init
-reparent_resources(struct resource *parent, struct resource *res)
-{
-       struct resource *p, **pp;
-       struct resource **firstpp = NULL;
-
-       for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
-               if (p->end < res->start)
-                       continue;
-               if (res->end < p->start)
-                       break;
-               if (p->start < res->start || p->end > res->end)
-                       return -1;      /* not completely contained */
-               if (firstpp == NULL)
-                       firstpp = pp;
-       }
-       if (firstpp == NULL)
-               return -1;      /* didn't find any conflicting entries? */
-       res->parent = parent;
-       res->child = *firstpp;
-       res->sibling = *pp;
-       *firstpp = res;
-       *pp = NULL;
-       for (p = res->child; p != NULL; p = p->sibling) {
-               p->parent = res;
-               DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
-                   p->name, (u64)p->start, (u64)p->end, res->name);
-       }
-       return 0;
-}
-
-/*
- * A bridge has been allocated a range which is outside the range
- * of its parent bridge, so it needs to be moved.
- */
-static int __init
-pci_relocate_bridge_resource(struct pci_bus *bus, int i)
-{
-       struct resource *res, *pr, *conflict;
-       unsigned long try, size;
-       int j;
-       struct pci_bus *parent = bus->parent;
-
-       if (parent == NULL) {
-               /* shouldn't ever happen */
-               printk(KERN_ERR "PCI: can't move host bridge resource\n");
-               return -1;
-       }
-       res = bus->resource[i];
-       if (res == NULL)
-               return -1;
-       pr = NULL;
-       for (j = 0; j < 4; j++) {
-               struct resource *r = parent->resource[j];
-               if (!r)
-                       continue;
-               if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
-                       continue;
-               if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
-                       pr = r;
-                       break;
-               }
-               if (res->flags & IORESOURCE_PREFETCH)
-                       pr = r;
-       }
-       if (pr == NULL)
-               return -1;
-       size = res->end - res->start;
-       if (pr->start > pr->end || size > pr->end - pr->start)
-               return -1;
-       try = pr->end;
-       for (;;) {
-               res->start = try - size;
-               res->end = try;
-               if (probe_resource(bus->parent, pr, res, &conflict) == 0)
-                       break;
-               if (conflict->start <= pr->start + size)
-                       return -1;
-               try = conflict->start - 1;
-       }
-       if (request_resource(pr, res)) {
-               DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n",
-                   (u64)res->start, (u64)res->end);
-               return -1;              /* "can't happen" */
-       }
-       update_bridge_base(bus, i);
-       printk(KERN_INFO "PCI: bridge %d resource %d moved to %llx..%llx\n",
-              bus->number, i, (unsigned long long)res->start,
-              (unsigned long long)res->end);
-       return 0;
-}
-
-static int __init
-probe_resource(struct pci_bus *parent, struct resource *pr,
-              struct resource *res, struct resource **conflict)
-{
-       struct pci_bus *bus;
-       struct pci_dev *dev;
-       struct resource *r;
-       int i;
-
-       for (r = pr->child; r != NULL; r = r->sibling) {
-               if (r->end >= res->start && res->end >= r->start) {
-                       *conflict = r;
-                       return 1;
-               }
-       }
-       list_for_each_entry(bus, &parent->children, node) {
-               for (i = 0; i < 4; ++i) {
-                       if ((r = bus->resource[i]) == NULL)
-                               continue;
-                       if (!r->flags || r->start > r->end || r == res)
-                               continue;
-                       if (pci_find_parent_resource(bus->self, r) != pr)
-                               continue;
-                       if (r->end >= res->start && res->end >= r->start) {
-                               *conflict = r;
-                               return 1;
-                       }
-               }
-       }
-       list_for_each_entry(dev, &parent->devices, bus_list) {
-               for (i = 0; i < 6; ++i) {
-                       r = &dev->resource[i];
-                       if (!r->flags || (r->flags & IORESOURCE_UNSET))
-                               continue;
-                       if (pci_find_parent_resource(dev, r) != pr)
-                               continue;
-                       if (r->end >= res->start && res->end >= r->start) {
-                               *conflict = r;
-                               return 1;
-                       }
-               }
-       }
-       return 0;
-}
-
-void __init
-update_bridge_resource(struct pci_dev *dev, struct resource *res)
-{
-       u8 io_base_lo, io_limit_lo;
-       u16 mem_base, mem_limit;
-       u16 cmd;
-       unsigned long start, end, off;
-       struct pci_controller *hose = dev->sysdata;
-
-       if (!hose) {
-               printk("update_bridge_base: no hose?\n");
-               return;
-       }
-       pci_read_config_word(dev, PCI_COMMAND, &cmd);
-       pci_write_config_word(dev, PCI_COMMAND,
-                             cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
-       if (res->flags & IORESOURCE_IO) {
-               off = (unsigned long) hose->io_base_virt - isa_io_base;
-               start = res->start - off;
-               end = res->end - off;
-               io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
-               io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
-               if (end > 0xffff)
-                       io_base_lo |= PCI_IO_RANGE_TYPE_32;
-               else
-                       io_base_lo |= PCI_IO_RANGE_TYPE_16;
-               pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
-                               start >> 16);
-               pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
-                               end >> 16);
-               pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
-               pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
-
-       } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-                  == IORESOURCE_MEM) {
-               off = hose->pci_mem_offset;
-               mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-               mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-               pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
-               pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
-
-       } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-                  == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
-               off = hose->pci_mem_offset;
-               mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
-               mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
-               pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
-               pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
-
-       } else {
-               DBG(KERN_ERR "PCI: ugh, bridge %s res has flags=%lx\n",
-                   pci_name(dev), res->flags);
-       }
-       pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
-static void __init
-update_bridge_base(struct pci_bus *bus, int i)
-{
-       struct resource *res = bus->resource[i];
-       struct pci_dev *dev = bus->self;
-       update_bridge_resource(dev, res);
-}
-
-static inline void alloc_resource(struct pci_dev *dev, int idx)
-{
-       struct resource *pr, *r = &dev->resource[idx];
-
-       DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n",
-           pci_name(dev), idx, (u64)r->start, (u64)r->end, r->flags);
-       pr = pci_find_parent_resource(dev, r);
-       if (!pr || request_resource(pr, r) < 0) {
-               printk(KERN_ERR "PCI: Cannot allocate resource region %d"
-                      " of device %s\n", idx, pci_name(dev));
-               if (pr)
-                       DBG("PCI:  parent is %p: %016llx-%016llx (f=%lx)\n",
-                           pr, (u64)pr->start, (u64)pr->end, pr->flags);
-               /* We'll assign a new address later */
-               r->flags |= IORESOURCE_UNSET;
-               r->end -= r->start;
-               r->start = 0;
-       }
-}
-
-static void __init
-pcibios_allocate_resources(int pass)
-{
-       struct pci_dev *dev = NULL;
-       int idx, disabled;
-       u16 command;
-       struct resource *r;
-
-       for_each_pci_dev(dev) {
-               pci_read_config_word(dev, PCI_COMMAND, &command);
-               for (idx = 0; idx < 6; idx++) {
-                       r = &dev->resource[idx];
-                       if (r->parent)          /* Already allocated */
-                               continue;
-                       if (!r->flags || (r->flags & IORESOURCE_UNSET))
-                               continue;       /* Not assigned at all */
-                       if (r->flags & IORESOURCE_IO)
-                               disabled = !(command & PCI_COMMAND_IO);
-                       else
-                               disabled = !(command & PCI_COMMAND_MEMORY);
-                       if (pass == disabled)
-                               alloc_resource(dev, idx);
-               }
-               if (pass)
-                       continue;
-               r = &dev->resource[PCI_ROM_RESOURCE];
-               if (r->flags & IORESOURCE_ROM_ENABLE) {
-                       /* Turn the ROM off, leave the resource region, but keep it unregistered. */
-                       u32 reg;
-                       DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
-                       r->flags &= ~IORESOURCE_ROM_ENABLE;
-                       pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-                       pci_write_config_dword(dev, dev->rom_base_reg,
-                                              reg & ~PCI_ROM_ADDRESS_ENABLE);
-               }
-       }
-}
-
-static void __init
-pcibios_assign_resources(void)
-{
-       struct pci_dev *dev = NULL;
-       int idx;
-       struct resource *r;
-
-       for_each_pci_dev(dev) {
-               int class = dev->class >> 8;
-
-               /* Don't touch classless devices and host bridges */
-               if (!class || class == PCI_CLASS_BRIDGE_HOST)
-                       continue;
-
-               for (idx = 0; idx < 6; idx++) {
-                       r = &dev->resource[idx];
-
-                       /*
-                        * We shall assign a new address to this resource,
-                        * either because the BIOS (sic) forgot to do so
-                        * or because we have decided the old address was
-                        * unusable for some reason.
-                        */
-                       if ((r->flags & IORESOURCE_UNSET) && r->end &&
-                           (!ppc_md.pcibios_enable_device_hook ||
-                            !ppc_md.pcibios_enable_device_hook(dev, 1))) {
-                               int rc;
-
-                               r->flags &= ~IORESOURCE_UNSET;
-                               rc = pci_assign_resource(dev, idx);
-                               BUG_ON(rc);
-                       }
-               }
-
-#if 0 /* don't assign ROMs */
-               r = &dev->resource[PCI_ROM_RESOURCE];
-               r->end -= r->start;
-               r->start = 0;
-               if (r->end)
-                       pci_assign_resource(dev, PCI_ROM_RESOURCE);
-#endif
-       }
-}
-
 #ifdef CONFIG_PPC_OF
 /*
  * Functions below are used on OpenFirmware machines.
@@ -619,7 +114,7 @@
        } else
                pci_to_OF_bus_map[pci_bus] = bus_range[0];
 
-       for (node=node->child; node != 0;node = node->sibling) {
+       for_each_child_of_node(node, node) {
                struct pci_dev* dev;
                const unsigned int *class_code, *reg;
        
@@ -662,8 +157,8 @@
 
        /* For each hose, we begin searching bridges */
        list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-               struct device_node* node;       
-               node = (struct device_node *)hose->arch_data;
+               struct device_node* node = hose->dn;
+
                if (!node)
                        continue;
                make_one_node_map(node, hose->first_busno);
@@ -688,15 +183,18 @@
 typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
 
 static struct device_node*
-scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
+scan_OF_pci_childs(struct device_node *parent, pci_OF_scan_iterator filter, void* data)
 {
+       struct device_node *node;
        struct device_node* sub_node;
 
-       for (; node != 0;node = node->sibling) {
+       for_each_child_of_node(parent, node) {
                const unsigned int *class_code;
        
-               if (filter(node, data))
+               if (filter(node, data)) {
+                       of_node_put(node);
                        return node;
+               }
 
                /* For PCI<->PCI bridges or CardBus bridges, we go down
                 * Note: some OFs create a parent node "multifunc-device" as
@@ -708,9 +206,11 @@
                        (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
                        strcmp(node->name, "multifunc-device"))
                        continue;
-               sub_node = scan_OF_pci_childs(node->child, filter, data);
-               if (sub_node)
+               sub_node = scan_OF_pci_childs(node, filter, data);
+               if (sub_node) {
+                       of_node_put(node);
                        return sub_node;
+               }
        }
        return NULL;
 }
@@ -718,11 +218,11 @@
 static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
                                               unsigned int devfn)
 {
-       struct device_node *np = NULL;
+       struct device_node *np;
        const u32 *reg;
        unsigned int psize;
 
-       while ((np = of_get_next_child(parent, np)) != NULL) {
+       for_each_child_of_node(parent, np) {
                reg = of_get_property(np, "reg", &psize);
                if (reg == NULL || psize < 4)
                        continue;
@@ -742,7 +242,7 @@
                struct pci_controller *hose = pci_bus_to_host(bus);
                if (hose == NULL)
                        return NULL;
-               return of_node_get(hose->arch_data);
+               return of_node_get(hose->dn);
        }
 
        /* not a root bus, we need to get our parent */
@@ -812,9 +312,9 @@
                return -ENODEV;
        /* Make sure it's really a PCI device */
        hose = pci_find_hose_for_OF_device(node);
-       if (!hose || !hose->arch_data)
+       if (!hose || !hose->dn)
                return -ENODEV;
-       if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
+       if (!scan_OF_pci_childs(hose->dn,
                        find_OF_pci_device_filter, (void *)node))
                return -ENODEV;
        reg = of_get_property(node, "reg", NULL);
@@ -843,120 +343,6 @@
 }
 EXPORT_SYMBOL(pci_device_from_OF_node);
 
-void __init
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
-                          struct device_node *dev, int primary)
-{
-       static unsigned int static_lc_ranges[256] __initdata;
-       const unsigned int *dt_ranges;
-       unsigned int *lc_ranges, *ranges, *prev, size;
-       int rlen = 0, orig_rlen;
-       int memno = 0;
-       struct resource *res;
-       int np, na = of_n_addr_cells(dev);
-       np = na + 5;
-
-       /* First we try to merge ranges to fix a problem with some pmacs
-        * that can have more than 3 ranges, fortunately using contiguous
-        * addresses -- BenH
-        */
-       dt_ranges = of_get_property(dev, "ranges", &rlen);
-       if (!dt_ranges)
-               return;
-       /* Sanity check, though hopefully that never happens */
-       if (rlen > sizeof(static_lc_ranges)) {
-               printk(KERN_WARNING "OF ranges property too large !\n");
-               rlen = sizeof(static_lc_ranges);
-       }
-       lc_ranges = static_lc_ranges;
-       memcpy(lc_ranges, dt_ranges, rlen);
-       orig_rlen = rlen;
-
-       /* Let's work on a copy of the "ranges" property instead of damaging
-        * the device-tree image in memory
-        */
-       ranges = lc_ranges;
-       prev = NULL;
-       while ((rlen -= np * sizeof(unsigned int)) >= 0) {
-               if (prev) {
-                       if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
-                               (prev[2] + prev[na+4]) == ranges[2] &&
-                               (prev[na+2] + prev[na+4]) == ranges[na+2]) {
-                               prev[na+4] += ranges[na+4];
-                               ranges[0] = 0;
-                               ranges += np;
-                               continue;
-                       }
-               }
-               prev = ranges;
-               ranges += np;
-       }
-
-       /*
-        * The ranges property is laid out as an array of elements,
-        * each of which comprises:
-        *   cells 0 - 2:       a PCI address
-        *   cells 3 or 3+4:    a CPU physical address
-        *                      (size depending on dev->n_addr_cells)
-        *   cells 4+5 or 5+6:  the size of the range
-        */
-       ranges = lc_ranges;
-       rlen = orig_rlen;
-       while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
-               res = NULL;
-               size = ranges[na+4];
-               switch ((ranges[0] >> 24) & 0x3) {
-               case 1:         /* I/O space */
-                       if (ranges[2] != 0)
-                               break;
-                       hose->io_base_phys = ranges[na+2];
-                       /* limit I/O space to 16MB */
-                       if (size > 0x01000000)
-                               size = 0x01000000;
-                       hose->io_base_virt = ioremap(ranges[na+2], size);
-                       if (primary)
-                               isa_io_base = (unsigned long) hose->io_base_virt;
-                       res = &hose->io_resource;
-                       res->flags = IORESOURCE_IO;
-                       res->start = ranges[2];
-                       DBG("PCI: IO 0x%llx -> 0x%llx\n",
-                           (u64)res->start, (u64)res->start + size - 1);
-                       break;
-               case 2:         /* memory space */
-                       memno = 0;
-                       if (ranges[1] == 0 && ranges[2] == 0
-                           && ranges[na+4] <= (16 << 20)) {
-                               /* 1st 16MB, i.e. ISA memory area */
-                               if (primary)
-                                       isa_mem_base = ranges[na+2];
-                               memno = 1;
-                       }
-                       while (memno < 3 && hose->mem_resources[memno].flags)
-                               ++memno;
-                       if (memno == 0)
-                               hose->pci_mem_offset = ranges[na+2] - ranges[2];
-                       if (memno < 3) {
-                               res = &hose->mem_resources[memno];
-                               res->flags = IORESOURCE_MEM;
-                               if(ranges[0] & 0x40000000)
-                                       res->flags |= IORESOURCE_PREFETCH;
-                               res->start = ranges[na+2];
-                               DBG("PCI: MEM[%d] 0x%llx -> 0x%llx\n", memno,
-                                   (u64)res->start, (u64)res->start + size - 1);
-                       }
-                       break;
-               }
-               if (res != NULL) {
-                       res->name = dev->full_name;
-                       res->end = res->start + size - 1;
-                       res->parent = NULL;
-                       res->sibling = NULL;
-                       res->child = NULL;
-               }
-               ranges += np;
-       }
-}
-
 /* We create the "pci-OF-bus-map" property now so it appears in the
  * /proc device tree
  */
@@ -986,219 +372,7 @@
 }
 #endif /* CONFIG_PPC_OF */
 
-#ifdef CONFIG_PPC_PMAC
-/*
- * This set of routines checks for PCI<->PCI bridges that have closed
- * IO resources and have child devices. It tries to re-open an IO
- * window on them.
- *
- * This is a _temporary_ fix to workaround a problem with Apple's OF
- * closing IO windows on P2P bridges when the OF drivers of cards
- * below this bridge don't claim any IO range (typically ATI or
- * Adaptec).
- *
- * A more complete fix would be to use drivers/pci/setup-bus.c, which
- * involves a working pcibios_fixup_pbus_ranges(), some more care about
- * ordering when creating the host bus resources, and maybe a few more
- * minor tweaks
- */
-
-/* Initialize bridges with base/limit values we have collected */
-static void __init
-do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
-{
-       struct pci_dev *bridge = bus->self;
-       struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
-       u32 l;
-       u16 w;
-       struct resource res;
-
-       if (bus->resource[0] == NULL)
-               return;
-       res = *(bus->resource[0]);
-
-       DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
-       res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
-       res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
-       DBG("  IO window: %016llx-%016llx\n", res.start, res.end);
-
-       /* Set up the top and bottom of the PCI I/O segment for this bus. */
-       pci_read_config_dword(bridge, PCI_IO_BASE, &l);
-       l &= 0xffff000f;
-       l |= (res.start >> 8) & 0x00f0;
-       l |= res.end & 0xf000;
-       pci_write_config_dword(bridge, PCI_IO_BASE, l);
-
-       if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
-               l = (res.start >> 16) | (res.end & 0xffff0000);
-               pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
-       }
-
-       pci_read_config_word(bridge, PCI_COMMAND, &w);
-       w |= PCI_COMMAND_IO;
-       pci_write_config_word(bridge, PCI_COMMAND, w);
-
-#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
-       if (enable_vga) {
-               pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
-               w |= PCI_BRIDGE_CTL_VGA;
-               pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
-       }
-#endif
-}
-
-/* This function is pretty basic and actually quite broken for the
- * general case, it's enough for us right now though. It's supposed
- * to tell us if we need to open an IO range at all or not and what
- * size.
- */
-static int __init
-check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
-{
-       struct pci_dev *dev;
-       int     i;
-       int     rc = 0;
-
-#define push_end(res, mask) do {               \
-       BUG_ON((mask+1) & mask);                \
-       res->end = (res->end + mask) | mask;    \
-} while (0)
-
-       list_for_each_entry(dev, &bus->devices, bus_list) {
-               u16 class = dev->class >> 8;
-
-               if (class == PCI_CLASS_DISPLAY_VGA ||
-                   class == PCI_CLASS_NOT_DEFINED_VGA)
-                       *found_vga = 1;
-               if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
-                       rc |= check_for_io_childs(dev->subordinate, res, found_vga);
-               if (class == PCI_CLASS_BRIDGE_CARDBUS)
-                       push_end(res, 0xfff);
-
-               for (i=0; i<PCI_NUM_RESOURCES; i++) {
-                       struct resource *r;
-                       unsigned long r_size;
-
-                       if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
-                           && i >= PCI_BRIDGE_RESOURCES)
-                               continue;
-                       r = &dev->resource[i];
-                       r_size = r->end - r->start;
-                       if (r_size < 0xfff)
-                               r_size = 0xfff;
-                       if (r->flags & IORESOURCE_IO && (r_size) != 0) {
-                               rc = 1;
-                               push_end(res, r_size);
-                       }
-               }
-       }
-
-       return rc;
-}
-
-/* Here we scan all P2P bridges of a given level that have a closed
- * IO window. Note that the test for the presence of a VGA card should
- * be improved to take into account already configured P2P bridges,
- * currently, we don't see them and might end up configuring 2 bridges
- * with VGA pass through enabled
- */
-static void __init
-do_fixup_p2p_level(struct pci_bus *bus)
-{
-       struct pci_bus *b;
-       int i, parent_io;
-       int has_vga = 0;
-
-       for (parent_io=0; parent_io<4; parent_io++)
-               if (bus->resource[parent_io]
-                   && bus->resource[parent_io]->flags & IORESOURCE_IO)
-                       break;
-       if (parent_io >= 4)
-               return;
-
-       list_for_each_entry(b, &bus->children, node) {
-               struct pci_dev *d = b->self;
-               struct pci_controller* hose = (struct pci_controller *)d->sysdata;
-               struct resource *res = b->resource[0];
-               struct resource tmp_res;
-               unsigned long max;
-               int found_vga = 0;
-
-               memset(&tmp_res, 0, sizeof(tmp_res));
-               tmp_res.start = bus->resource[parent_io]->start;
-
-               /* We don't let low addresses go through that closed P2P bridge, well,
-                * that may not be necessary but I feel safer that way
-                */
-               if (tmp_res.start == 0)
-                       tmp_res.start = 0x1000;
-       
-               if (!list_empty(&b->devices) && res && res->flags == 0 &&
-                   res != bus->resource[parent_io] &&
-                   (d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
-                   check_for_io_childs(b, &tmp_res, &found_vga)) {
-                       u8 io_base_lo;
-
-                       printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
-
-                       if (found_vga) {
-                               if (has_vga) {
-                                       printk(KERN_WARNING "Skipping VGA, already active"
-                                           " on bus segment\n");
-                                       found_vga = 0;
-                               } else
-                                       has_vga = 1;
-                       }
-                       pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
-
-                       if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
-                               max = ((unsigned long) hose->io_base_virt
-                                       - isa_io_base) + 0xffffffff;
-                       else
-                               max = ((unsigned long) hose->io_base_virt
-                                       - isa_io_base) + 0xffff;
-
-                       *res = tmp_res;
-                       res->flags = IORESOURCE_IO;
-                       res->name = b->name;
-               
-                       /* Find a resource in the parent where we can allocate */
-                       for (i = 0 ; i < 4; i++) {
-                               struct resource *r = bus->resource[i];
-                               if (!r)
-                                       continue;
-                               if ((r->flags & IORESOURCE_IO) == 0)
-                                       continue;
-                               DBG("Trying to allocate from %016llx, size %016llx from parent"
-                                   " res %d: %016llx -> %016llx\n",
-                                       res->start, res->end, i, r->start, r->end);
-                       
-                               if (allocate_resource(r, res, res->end + 1, res->start, max,
-                                   res->end + 1, NULL, NULL) < 0) {
-                                       DBG("Failed !\n");
-                                       continue;
-                               }
-                               do_update_p2p_io_resource(b, found_vga);
-                               break;
-                       }
-               }
-               do_fixup_p2p_level(b);
-       }
-}
-
-static void
-pcibios_fixup_p2p_bridges(void)
-{
-       struct pci_bus *b;
-
-       list_for_each_entry(b, &pci_root_buses, node)
-               do_fixup_p2p_level(b);
-}
-
-#endif /* CONFIG_PPC_PMAC */
-
-static int __init
-pcibios_init(void)
+static int __init pcibios_init(void)
 {
        struct pci_controller *hose, *tmp;
        struct pci_bus *bus;
@@ -1206,6 +380,9 @@
 
        printk(KERN_INFO "PCI: Probing PCI hardware\n");
 
+       if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_BUS)
+               pci_assign_all_buses = 1;
+
        /* Scan all of the recorded PCI controllers.  */
        list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
                if (pci_assign_all_buses)
@@ -1213,9 +390,10 @@
                hose->last_busno = 0xff;
                bus = pci_scan_bus_parented(hose->parent, hose->first_busno,
                                            hose->ops, hose);
-               if (bus)
+               if (bus) {
                        pci_bus_add_devices(bus);
-               hose->last_busno = bus->subordinate;
+                       hose->last_busno = bus->subordinate;
+               }
                if (pci_assign_all_buses || next_busno <= hose->last_busno)
                        next_busno = hose->last_busno + pcibios_assign_bus_offset;
        }
@@ -1228,18 +406,8 @@
        if (pci_assign_all_buses && have_of)
                pcibios_make_OF_bus_map();
 
-       /* Call machine dependent fixup */
-       if (ppc_md.pcibios_fixup)
-               ppc_md.pcibios_fixup();
-
-       /* Allocate and assign resources */
-       pcibios_allocate_bus_resources(&pci_root_buses);
-       pcibios_allocate_resources(0);
-       pcibios_allocate_resources(1);
-#ifdef CONFIG_PPC_PMAC
-       pcibios_fixup_p2p_bridges();
-#endif /* CONFIG_PPC_PMAC */
-       pcibios_assign_resources();
+       /* Call common code to handle resource allocation */
+       pcibios_resource_survey();
 
        /* Call machine dependent post-init code */
        if (ppc_md.pcibios_after_init)
@@ -1250,14 +418,14 @@
 
 subsys_initcall(pcibios_init);
 
-void pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
 {
        struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
        unsigned long io_offset;
        struct resource *res;
-       struct pci_dev *dev;
        int i;
 
+       /* Hookup PHB resources */
        io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
        if (bus->parent == NULL) {
                /* This is a host bridge - fill in its resources */
@@ -1272,8 +440,8 @@
                        res->end = IO_SPACE_LIMIT;
                        res->flags = IORESOURCE_IO;
                }
-               res->start += io_offset;
-               res->end += io_offset;
+               res->start = (res->start + io_offset) & 0xffffffffu;
+               res->end = (res->end + io_offset) & 0xffffffffu;
 
                for (i = 0; i < 3; ++i) {
                        res = &hose->mem_resources[i];
@@ -1288,35 +456,6 @@
                        }
                        bus->resource[i+1] = res;
                }
-       } else {
-               /* This is a subordinate bridge */
-               pci_read_bridge_bases(bus);
-
-               for (i = 0; i < 4; ++i) {
-                       if ((res = bus->resource[i]) == NULL)
-                               continue;
-                       if (!res->flags || bus->self->transparent)
-                               continue;
-                       if (io_offset && (res->flags & IORESOURCE_IO)) {
-                               res->start += io_offset;
-                               res->end += io_offset;
-                       } else if (hose->pci_mem_offset
-                                  && (res->flags & IORESOURCE_MEM)) {
-                               res->start += hose->pci_mem_offset;
-                               res->end += hose->pci_mem_offset;
-                       }
-               }
-       }
-
-       /* Platform specific bus fixups */
-       if (ppc_md.pcibios_fixup_bus)
-               ppc_md.pcibios_fixup_bus(bus);
-
-       /* Read default IRQs and fixup if necessary */
-       list_for_each_entry(dev, &bus->devices, bus_list) {
-               pci_read_irq_line(dev);
-               if (ppc_md.pci_irq_fixup)
-                       ppc_md.pci_irq_fixup(dev);
        }
 }
 
@@ -1328,37 +467,6 @@
        /* XXX FIXME - update OF device tree node interrupt property */
 }
 
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-       u16 cmd, old_cmd;
-       int idx;
-       struct resource *r;
-
-       if (ppc_md.pcibios_enable_device_hook)
-               if (ppc_md.pcibios_enable_device_hook(dev, 0))
-                       return -EINVAL;
-               
-       pci_read_config_word(dev, PCI_COMMAND, &cmd);
-       old_cmd = cmd;
-       for (idx=0; idx<6; idx++) {
-               r = &dev->resource[idx];
-               if (r->flags & IORESOURCE_UNSET) {
-                       printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-                       return -EINVAL;
-               }
-               if (r->flags & IORESOURCE_IO)
-                       cmd |= PCI_COMMAND_IO;
-               if (r->flags & IORESOURCE_MEM)
-                       cmd |= PCI_COMMAND_MEMORY;
-       }
-       if (cmd != old_cmd) {
-               printk("PCI: Enabling device %s (%04x -> %04x)\n",
-                      pci_name(dev), old_cmd, cmd);
-               pci_write_config_word(dev, PCI_COMMAND, cmd);
-       }
-       return 0;
-}
-
 static struct pci_controller*
 pci_bus_to_hose(int bus)
 {
@@ -1381,17 +489,6 @@
        struct pci_controller* hose;
        long result = -EOPNOTSUPP;
 
-       /* Argh ! Please forgive me for that hack, but that's the
-        * simplest way to get existing XFree to not lockup on some
-        * G5 machines... So when something asks for bus 0 io base
-        * (bus 0 is HT root), we return the AGP one instead.
-        */
-#ifdef CONFIG_PPC_PMAC
-       if (machine_is(powermac) && machine_is_compatible("MacRISC4"))
-               if (bus == 0)
-                       bus = 0xf0;
-#endif /* CONFIG_PPC_PMAC */
-
        hose = pci_bus_to_hose(bus);
        if (!hose)
                return -ENODEV;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/pci_64.c powerpc.git/arch/powerpc/kernel/pci_64.c
--- linux-2.6.24/arch/powerpc/kernel/pci_64.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/pci_64.c    2008-01-28 20:25:49.000000000 +0100
@@ -31,7 +31,6 @@
 #include <asm/byteorder.h>
 #include <asm/machdep.h>
 #include <asm/ppc-pci.h>
-#include <asm/firmware.h>
 
 #ifdef DEBUG
 #include <asm/udbg.h>
@@ -41,10 +40,6 @@
 #endif
 
 unsigned long pci_probe_only = 1;
-int pci_assign_all_buses = 0;
-
-static void fixup_resource(struct resource *res, struct pci_dev *dev);
-static void do_bus_setup(struct pci_bus *bus);
 
 /* pci_io_base -- the base address from which io bars are offsets.
  * This is the lowest I/O base address (so bar values are always positive),
@@ -70,139 +65,31 @@
 }
 EXPORT_SYMBOL(get_pci_dma_ops);
 
-static void fixup_broken_pcnet32(struct pci_dev* dev)
-{
-       if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-               dev->vendor = PCI_VENDOR_ID_AMD;
-               pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-       }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
-
-void  pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-                             struct resource *res)
-{
-       unsigned long offset = 0;
-       struct pci_controller *hose = pci_bus_to_host(dev->bus);
-
-       if (!hose)
-               return;
-
-       if (res->flags & IORESOURCE_IO)
-               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
-       if (res->flags & IORESOURCE_MEM)
-               offset = hose->pci_mem_offset;
-
-       region->start = res->start - offset;
-       region->end = res->end - offset;
-}
 
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-                             struct pci_bus_region *region)
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 {
-       unsigned long offset = 0;
-       struct pci_controller *hose = pci_bus_to_host(dev->bus);
-
-       if (!hose)
-               return;
-
-       if (res->flags & IORESOURCE_IO)
-               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
-       if (res->flags & IORESOURCE_MEM)
-               offset = hose->pci_mem_offset;
-
-       res->start = region->start + offset;
-       res->end = region->end + offset;
+       return dma_set_mask(&dev->dev, mask);
 }
 
-#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pcibios_resource_to_bus);
-EXPORT_SYMBOL(pcibios_bus_to_resource);
-#endif
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-void pcibios_align_resource(void *data, struct resource *res,
-                           resource_size_t size, resource_size_t align)
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 {
-       struct pci_dev *dev = data;
-       struct pci_controller *hose = pci_bus_to_host(dev->bus);
-       resource_size_t start = res->start;
-       unsigned long alignto;
-
-       if (res->flags & IORESOURCE_IO) {
-               unsigned long offset = (unsigned long)hose->io_base_virt -
-                                       _IO_BASE;
-               /* Make sure we start at our min on all hoses */
-               if (start - offset < PCIBIOS_MIN_IO)
-                       start = PCIBIOS_MIN_IO + offset;
-
-               /*
-                * Put everything into 0x00-0xff region modulo 0x400
-                */
-               if (start & 0x300)
-                       start = (start + 0x3ff) & ~0x3ff;
+       int rc;
 
-       } else if (res->flags & IORESOURCE_MEM) {
-               /* Make sure we start at our min on all hoses */
-               if (start - hose->pci_mem_offset < PCIBIOS_MIN_MEM)
-                       start = PCIBIOS_MIN_MEM + hose->pci_mem_offset;
+       rc = dma_set_mask(&dev->dev, mask);
+       dev->dev.coherent_dma_mask = dev->dma_mask;
 
-               /* Align to multiple of size of minimum base.  */
-               alignto = max(0x1000UL, align);
-               start = ALIGN(start, alignto);
-       }
-
-       res->start = start;
+       return rc;
 }
 
-void __devinit pcibios_claim_one_bus(struct pci_bus *b)
+static void fixup_broken_pcnet32(struct pci_dev* dev)
 {
-       struct pci_dev *dev;
-       struct pci_bus *child_bus;
-
-       list_for_each_entry(dev, &b->devices, bus_list) {
-               int i;
-
-               for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-                       struct resource *r = &dev->resource[i];
-
-                       if (r->parent || !r->start || !r->flags)
-                               continue;
-                       pci_claim_resource(dev, i);
-               }
+       if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
+               dev->vendor = PCI_VENDOR_ID_AMD;
+               pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
        }
-
-       list_for_each_entry(child_bus, &b->children, node)
-               pcibios_claim_one_bus(child_bus);
 }
-#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
-#endif
-
-static void __init pcibios_claim_of_setup(void)
-{
-       struct pci_bus *b;
-
-       if (firmware_has_feature(FW_FEATURE_ISERIES))
-               return;
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
 
-       list_for_each_entry(b, &pci_root_buses, node)
-               pcibios_claim_one_bus(b);
-}
 
 static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 {
@@ -270,7 +157,6 @@
                res->end = base + size - 1;
                res->flags = flags;
                res->name = pci_name(dev);
-               fixup_resource(res, dev);
        }
 }
 
@@ -339,16 +225,17 @@
 EXPORT_SYMBOL(of_create_pci_dev);
 
 void __devinit of_scan_bus(struct device_node *node,
-                                 struct pci_bus *bus)
+                          struct pci_bus *bus)
 {
-       struct device_node *child = NULL;
+       struct device_node *child;
        const u32 *reg;
        int reglen, devfn;
        struct pci_dev *dev;
 
        DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number);
 
-       while ((child = of_get_next_child(node, child)) != NULL) {
+       /* Scan direct children */
+       for_each_child_of_node(node, child) {
                DBG("  * %s\n", child->full_name);
                reg = of_get_property(child, "reg", &reglen);
                if (reg == NULL || reglen < 20)
@@ -359,19 +246,26 @@
                dev = of_create_pci_dev(child, bus, devfn);
                if (!dev)
                        continue;
-               DBG("dev header type: %x\n", dev->hdr_type);
+               DBG("    dev header type: %x\n", dev->hdr_type);
+       }
 
+       /* Ally all fixups */
+       pcibios_fixup_of_probed_bus(bus);
+
+       /* Now scan child busses */
+       list_for_each_entry(dev, &bus->devices, bus_list) {
                if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
-                   dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
-                       of_scan_pci_bridge(child, dev);
+                   dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
+                       struct device_node *child = pci_device_to_OF_node(dev);
+                       if (dev)
+                               of_scan_pci_bridge(child, dev);
+               }
        }
-
-       do_bus_setup(bus);
 }
 EXPORT_SYMBOL(of_scan_bus);
 
 void __devinit of_scan_pci_bridge(struct device_node *node,
-                               struct pci_dev *dev)
+                                 struct pci_dev *dev)
 {
        struct pci_bus *bus;
        const u32 *busrange, *ranges;
@@ -441,7 +335,6 @@
                res->start = of_read_number(&ranges[1], 2);
                res->end = res->start + size - 1;
                res->flags = flags;
-               fixup_resource(res, dev);
        }
        sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
                bus->number);
@@ -462,12 +355,12 @@
 void __devinit scan_phb(struct pci_controller *hose)
 {
        struct pci_bus *bus;
-       struct device_node *node = hose->arch_data;
+       struct device_node *node = hose->dn;
        int i, mode;
-       struct resource *res;
 
-       DBG("Scanning PHB %s\n", node ? node->full_name : "<NO NAME>");
+       DBG("PCI: Scanning PHB %s\n", node ? node->full_name : "<NO NAME>");
 
+       /* Create an empty bus for the toplevel */
        bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
        if (bus == NULL) {
                printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
@@ -477,27 +370,27 @@
        bus->secondary = hose->first_busno;
        hose->bus = bus;
 
-       if (!firmware_has_feature(FW_FEATURE_ISERIES))
-               pcibios_map_io_space(bus);
-
-       bus->resource[0] = res = &hose->io_resource;
-       if (res->flags && request_resource(&ioport_resource, res)) {
-               printk(KERN_ERR "Failed to request PCI IO region "
-                      "on PCI domain %04x\n", hose->global_number);
-               DBG("res->start = 0x%016lx, res->end = 0x%016lx\n",
-                   res->start, res->end);
-       }
+       /* Get some IO space for the new PHB */
+       pcibios_map_io_space(bus);
 
+       /* Wire up PHB bus resources */
+       DBG("PCI: PHB IO resource    = %016lx-%016lx [%lx]\n",
+           hose->io_resource.start, hose->io_resource.end,
+           hose->io_resource.flags);
+       bus->resource[0] = &hose->io_resource;
        for (i = 0; i < 3; ++i) {
-               res = &hose->mem_resources[i];
-               bus->resource[i+1] = res;
-               if (res->flags && request_resource(&iomem_resource, res))
-                       printk(KERN_ERR "Failed to request PCI memory region "
-                              "on PCI domain %04x\n", hose->global_number);
-       }
+               DBG("PCI: PHB MEM resource %d = %016lx-%016lx [%lx]\n", i,
+                   hose->mem_resources[i].start,
+                   hose->mem_resources[i].end,
+                   hose->mem_resources[i].flags);
+               bus->resource[i+1] = &hose->mem_resources[i];
+       }
+       DBG("PCI: PHB MEM offset     = %016lx\n", hose->pci_mem_offset);
+       DBG("PCI: PHB IO  offset     = %08lx\n",
+           (unsigned long)hose->io_base_virt - _IO_BASE);
 
+       /* Get probe mode and perform scan */
        mode = PCI_PROBE_NORMAL;
-
        if (node && ppc_md.pci_probe_mode)
                mode = ppc_md.pci_probe_mode(bus);
        DBG("    probe mode: %d\n", mode);
@@ -514,15 +407,15 @@
 {
        struct pci_controller *hose, *tmp;
 
+       printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
        /* For now, override phys_mem_access_prot. If we need it,
         * later, we may move that initialization to each ppc_md
         */
        ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
 
-       if (firmware_has_feature(FW_FEATURE_ISERIES))
-               iSeries_pcibios_init();
-
-       printk(KERN_DEBUG "PCI: Probing PCI hardware\n");
+       if (pci_probe_only)
+               ppc_pci_flags |= PPC_PCI_PROBE_ONLY;
 
        /* Scan all of the recorded PCI controllers.  */
        list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
@@ -530,19 +423,8 @@
                pci_bus_add_devices(hose->bus);
        }
 
-       if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
-               if (pci_probe_only)
-                       pcibios_claim_of_setup();
-               else
-                       /* FIXME: `else' will be removed when
-                          pci_assign_unassigned_resources() is able to work
-                          correctly with [partially] allocated PCI tree. */
-                       pci_assign_unassigned_resources();
-       }
-
-       /* Call machine dependent final fixup */
-       if (ppc_md.pcibios_fixup)
-               ppc_md.pcibios_fixup();
+       /* Call common code to handle resource allocation */
+       pcibios_resource_survey();
 
        printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
 
@@ -551,141 +433,6 @@
 
 subsys_initcall(pcibios_init);
 
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-       u16 cmd, oldcmd;
-       int i;
-
-       pci_read_config_word(dev, PCI_COMMAND, &cmd);
-       oldcmd = cmd;
-
-       for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-               struct resource *res = &dev->resource[i];
-
-               /* Only set up the requested stuff */
-               if (!(mask & (1<<i)))
-                       continue;
-
-               if (res->flags & IORESOURCE_IO)
-                       cmd |= PCI_COMMAND_IO;
-               if (res->flags & IORESOURCE_MEM)
-                       cmd |= PCI_COMMAND_MEMORY;
-       }
-
-       if (cmd != oldcmd) {
-               printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
-                      pci_name(dev), cmd);
-                /* Enable the appropriate bits in the PCI command register.  */
-               pci_write_config_word(dev, PCI_COMMAND, cmd);
-       }
-       return 0;
-}
-
-/* Decide whether to display the domain number in /proc */
-int pci_proc_domain(struct pci_bus *bus)
-{
-       if (firmware_has_feature(FW_FEATURE_ISERIES))
-               return 0;
-       else {
-               struct pci_controller *hose = pci_bus_to_host(bus);
-               return hose->buid != 0;
-       }
-}
-
-void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
-                                           struct device_node *dev, int prim)
-{
-       const unsigned int *ranges;
-       unsigned int pci_space;
-       unsigned long size;
-       int rlen = 0;
-       int memno = 0;
-       struct resource *res;
-       int np, na = of_n_addr_cells(dev);
-       unsigned long pci_addr, cpu_phys_addr;
-
-       np = na + 5;
-
-       /* From "PCI Binding to 1275"
-        * The ranges property is laid out as an array of elements,
-        * each of which comprises:
-        *   cells 0 - 2:       a PCI address
-        *   cells 3 or 3+4:    a CPU physical address
-        *                      (size depending on dev->n_addr_cells)
-        *   cells 4+5 or 5+6:  the size of the range
-        */
-       ranges = of_get_property(dev, "ranges", &rlen);
-       if (ranges == NULL)
-               return;
-       hose->io_base_phys = 0;
-       while ((rlen -= np * sizeof(unsigned int)) >= 0) {
-               res = NULL;
-               pci_space = ranges[0];
-               pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2];
-               cpu_phys_addr = of_translate_address(dev, &ranges[3]);
-               size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4];
-               ranges += np;
-               if (size == 0)
-                       continue;
-
-               /* Now consume following elements while they are contiguous */
-               while (rlen >= np * sizeof(unsigned int)) {
-                       unsigned long addr, phys;
-
-                       if (ranges[0] != pci_space)
-                               break;
-                       addr = ((unsigned long)ranges[1] << 32) | ranges[2];
-                       phys = ranges[3];
-                       if (na >= 2)
-                               phys = (phys << 32) | ranges[4];
-                       if (addr != pci_addr + size ||
-                           phys != cpu_phys_addr + size)
-                               break;
-
-                       size += ((unsigned long)ranges[na+3] << 32)
-                               | ranges[na+4];
-                       ranges += np;
-                       rlen -= np * sizeof(unsigned int);
-               }
-
-               switch ((pci_space >> 24) & 0x3) {
-               case 1:         /* I/O space */
-                       hose->io_base_phys = cpu_phys_addr - pci_addr;
-                       /* handle from 0 to top of I/O window */
-                       hose->pci_io_size = pci_addr + size;
-
-                       res = &hose->io_resource;
-                       res->flags = IORESOURCE_IO;
-                       res->start = pci_addr;
-                       DBG("phb%d: IO 0x%lx -> 0x%lx\n", hose->global_number,
-                                   res->start, res->start + size - 1);
-                       break;
-               case 2:         /* memory space */
-                       memno = 0;
-                       while (memno < 3 && hose->mem_resources[memno].flags)
-                               ++memno;
-
-                       if (memno == 0)
-                               hose->pci_mem_offset = cpu_phys_addr - pci_addr;
-                       if (memno < 3) {
-                               res = &hose->mem_resources[memno];
-                               res->flags = IORESOURCE_MEM;
-                               res->start = cpu_phys_addr;
-                               DBG("phb%d: MEM 0x%lx -> 0x%lx\n", hose->global_number,
-                                           res->start, res->start + size - 1);
-                       }
-                       break;
-               }
-               if (res != NULL) {
-                       res->name = dev->full_name;
-                       res->end = res->start + size - 1;
-                       res->parent = NULL;
-                       res->sibling = NULL;
-                       res->child = NULL;
-               }
-       }
-}
-
 #ifdef CONFIG_HOTPLUG
 
 int pcibios_unmap_io_space(struct pci_bus *bus)
@@ -719,8 +466,7 @@
        if (hose->io_base_alloc == 0)
                return 0;
 
-       DBG("IO unmapping for PHB %s\n",
-           ((struct device_node *)hose->arch_data)->full_name);
+       DBG("IO unmapping for PHB %s\n", hose->dn->full_name);
        DBG("  alloc=0x%p\n", hose->io_base_alloc);
 
        /* This is a PHB, we fully unmap the IO area */
@@ -779,8 +525,7 @@
        hose->io_base_virt = (void __iomem *)(area->addr +
                                              hose->io_base_phys - phys_page);
 
-       DBG("IO mapping for PHB %s\n",
-           ((struct device_node *)hose->arch_data)->full_name);
+       DBG("IO mapping for PHB %s\n", hose->dn->full_name);
        DBG("  phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
            hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
        DBG("  size=0x%016lx (alloc=0x%016lx)\n",
@@ -803,51 +548,13 @@
 }
 EXPORT_SYMBOL_GPL(pcibios_map_io_space);
 
-static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
-{
-       struct pci_controller *hose = pci_bus_to_host(dev->bus);
-       unsigned long offset;
-
-       if (res->flags & IORESOURCE_IO) {
-               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-               res->start += offset;
-               res->end += offset;
-       } else if (res->flags & IORESOURCE_MEM) {
-               res->start += hose->pci_mem_offset;
-               res->end += hose->pci_mem_offset;
-       }
-}
-
-void __devinit pcibios_fixup_device_resources(struct pci_dev *dev,
-                                             struct pci_bus *bus)
-{
-       /* Update device resources.  */
-       int i;
-
-       DBG("%s: Fixup resources:\n", pci_name(dev));
-       for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-               struct resource *res = &dev->resource[i];
-               if (!res->flags)
-                       continue;
-
-               DBG("  0x%02x < %08lx:0x%016lx...0x%016lx\n",
-                   i, res->flags, res->start, res->end);
-
-               fixup_resource(res, dev);
-
-               DBG("       > %08lx:0x%016lx...0x%016lx\n",
-                   res->flags, res->start, res->end);
-       }
-}
-EXPORT_SYMBOL(pcibios_fixup_device_resources);
-
 void __devinit pcibios_setup_new_device(struct pci_dev *dev)
 {
        struct dev_archdata *sd = &dev->dev.archdata;
 
        sd->of_node = pci_device_to_OF_node(dev);
 
-       DBG("PCI device %s OF node: %s\n", pci_name(dev),
+       DBG("PCI: device %s OF node: %s\n", pci_name(dev),
            sd->of_node ? sd->of_node->full_name : "<none>");
 
        sd->dma_ops = pci_dma_ops;
@@ -861,7 +568,7 @@
 }
 EXPORT_SYMBOL(pcibios_setup_new_device);
 
-static void __devinit do_bus_setup(struct pci_bus *bus)
+void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
 {
        struct pci_dev *dev;
 
@@ -870,42 +577,7 @@
 
        list_for_each_entry(dev, &bus->devices, bus_list)
                pcibios_setup_new_device(dev);
-
-       /* Read default IRQs and fixup if necessary */
-       list_for_each_entry(dev, &bus->devices, bus_list) {
-               pci_read_irq_line(dev);
-               if (ppc_md.pci_irq_fixup)
-                       ppc_md.pci_irq_fixup(dev);
-       }
-}
-
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
-       struct pci_dev *dev = bus->self;
-       struct device_node *np;
-
-       np = pci_bus_to_OF_node(bus);
-
-       DBG("pcibios_fixup_bus(%s)\n", np ? np->full_name : "<???>");
-
-       if (dev && pci_probe_only &&
-           (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-               /* This is a subordinate bridge */
-
-               pci_read_bridge_bases(bus);
-               pcibios_fixup_device_resources(dev, bus);
-       }
-
-       do_bus_setup(bus);
-
-       if (!pci_probe_only)
-               return;
-
-       list_for_each_entry(dev, &bus->devices, bus_list)
-               if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
-                       pcibios_fixup_device_resources(dev, bus);
 }
-EXPORT_SYMBOL(pcibios_fixup_bus);
 
 unsigned long pci_address_to_pio(phys_addr_t address)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/pci_dn.c powerpc.git/arch/powerpc/kernel/pci_dn.c
--- linux-2.6.24/arch/powerpc/kernel/pci_dn.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/pci_dn.c    2008-01-28 20:25:49.000000000 +0100
@@ -56,11 +56,6 @@
                pdn->busno = (regs[0] >> 16) & 0xff;
                pdn->devfn = (regs[0] >> 8) & 0xff;
        }
-       if (firmware_has_feature(FW_FEATURE_ISERIES)) {
-               const u32 *busp = of_get_property(dn, "linux,subbus", NULL);
-               if (busp)
-                       pdn->bussubno = *busp;
-       }
 
        pdn->pci_ext_config_space = (type && *type == 1);
        return NULL;
@@ -133,7 +128,7 @@
  */
 void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb)
 {
-       struct device_node * dn = (struct device_node *) phb->arch_data;
+       struct device_node *dn = phb->dn;
        struct pci_dn *pdn;
 
        /* PHB nodes themselves must not match */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/ppc_ksyms.c powerpc.git/arch/powerpc/kernel/ppc_ksyms.c
--- linux-2.6.24/arch/powerpc/kernel/ppc_ksyms.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/ppc_ksyms.c 2008-01-28 20:25:49.000000000 +0100
@@ -59,6 +59,7 @@
 extern int sys_sigreturn(struct pt_regs *regs);
 
 EXPORT_SYMBOL(clear_pages);
+EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/prom.c powerpc.git/arch/powerpc/kernel/prom.c
--- linux-2.6.24/arch/powerpc/kernel/prom.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/prom.c      2008-01-28 20:25:49.000000000 +0100
@@ -583,6 +583,20 @@
                      ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
 }
 
+#ifdef CONFIG_PPC64
+static void __init check_cpu_slb_size(unsigned long node)
+{
+       u32 *slb_size_ptr;
+
+       slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
+       if (slb_size_ptr != NULL) {
+               mmu_slb_size = *slb_size_ptr;
+       }
+}
+#else
+#define check_cpu_slb_size(node) do { } while(0)
+#endif
+
 static struct feature_property {
        const char *name;
        u32 min_value;
@@ -600,6 +614,29 @@
 #endif /* CONFIG_PPC64 */
 };
 
+#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
+static inline void identical_pvr_fixup(unsigned long node)
+{
+       unsigned int pvr;
+       char *model = of_get_flat_dt_prop(node, "model", NULL);
+
+       /*
+        * Since 440GR(x)/440EP(x) processors have the same pvr,
+        * we check the node path and set bit 28 in the cur_cpu_spec
+        * pvr for EP(x) processor version. This bit is always 0 in
+        * the "real" pvr. Then we call identify_cpu again with
+        * the new logical pvr to enable FPU support.
+        */
+       if (model && strstr(model, "440EP")) {
+               pvr = cur_cpu_spec->pvr_value | 0x8;
+               identify_cpu(0, pvr);
+               DBG("Using logical pvr %x for %s\n", pvr, model);
+       }
+}
+#else
+#define identical_pvr_fixup(node) do { } while(0)
+#endif
+
 static void __init check_cpu_feature_properties(unsigned long node)
 {
        unsigned long i;
@@ -697,22 +734,13 @@
                prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
                if (prop && (*prop & 0xff000000) == 0x0f000000)
                        identify_cpu(0, *prop);
-#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
-               /*
-                * Since 440GR(x)/440EP(x) processors have the same pvr,
-                * we check the node path and set bit 28 in the cur_cpu_spec
-                * pvr for EP(x) processor version. This bit is always 0 in
-                * the "real" pvr. Then we call identify_cpu again with
-                * the new logical pvr to enable FPU support.
-                */
-               if (strstr(uname, "440EP")) {
-                       identify_cpu(0, cur_cpu_spec->pvr_value | 0x8);
-               }
-#endif
+
+               identical_pvr_fixup(node);
        }
 
        check_cpu_feature_properties(node);
        check_cpu_pa_features(node);
+       check_cpu_slb_size(node);
 
 #ifdef CONFIG_PPC_PSERIES
        if (nthreads > 1)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/prom_parse.c powerpc.git/arch/powerpc/kernel/prom_parse.c
--- linux-2.6.24/arch/powerpc/kernel/prom_parse.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/prom_parse.c        2008-01-28 20:25:49.000000000 +0100
@@ -273,7 +273,7 @@
 #else
                        struct pci_controller *host;
                        host = pci_bus_to_host(pdev->bus);
-                       ppnode = host ? host->arch_data : NULL;
+                       ppnode = host ? host->dn : NULL;
 #endif
                        /* No node for host bridge ? give up */
                        if (ppnode == NULL)
@@ -419,7 +419,7 @@
 
 static int of_translate_one(struct device_node *parent, struct of_bus *bus,
                            struct of_bus *pbus, u32 *addr,
-                           int na, int ns, int pna)
+                           int na, int ns, int pna, const char *rprop)
 {
        const u32 *ranges;
        unsigned int rlen;
@@ -438,7 +438,7 @@
         * to translate addresses that aren't supposed to be translated in
         * the first place. --BenH.
         */
-       ranges = of_get_property(parent, "ranges", &rlen);
+       ranges = of_get_property(parent, rprop, &rlen);
        if (ranges == NULL || rlen == 0) {
                offset = of_read_number(addr, na);
                memset(addr, 0, pna * 4);
@@ -481,7 +481,8 @@
  * that can be mapped to a cpu physical address). This is not really specified
  * that way, but this is traditionally the way IBM at least do things
  */
-u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
+u64 __of_translate_address(struct device_node *dev, const u32 *in_addr,
+                          const char *rprop)
 {
        struct device_node *parent = NULL;
        struct of_bus *bus, *pbus;
@@ -540,7 +541,7 @@
                    pbus->name, pna, pns, parent->full_name);
 
                /* Apply bus translation */
-               if (of_translate_one(dev, bus, pbus, addr, na, ns, pna))
+               if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop))
                        break;
 
                /* Complete the move up one level */
@@ -556,8 +557,19 @@
 
        return result;
 }
+
+u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
+{
+       return __of_translate_address(dev, in_addr, "ranges");
+}
 EXPORT_SYMBOL(of_translate_address);
 
+u64 of_translate_dma_address(struct device_node *dev, const u32 *in_addr)
+{
+       return __of_translate_address(dev, in_addr, "dma-ranges");
+}
+EXPORT_SYMBOL(of_translate_dma_address);
+
 const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
                    unsigned int *flags)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/rio.c powerpc.git/arch/powerpc/kernel/rio.c
--- linux-2.6.24/arch/powerpc/kernel/rio.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/rio.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,52 @@
+/*
+ * RapidIO PPC32 support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/rio.h>
+
+#include <asm/rio.h>
+
+/**
+ * platform_rio_init - Do platform specific RIO init
+ *
+ * Any platform specific initialization of RapdIO
+ * hardware is done here as well as registration
+ * of any active master ports in the system.
+ */
+void __attribute__ ((weak))
+    platform_rio_init(void)
+{
+       printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
+}
+
+/**
+ * ppc_rio_init - Do PPC32 RIO init
+ *
+ * Calls platform-specific RIO init code and then calls
+ * rio_init_mports() to initialize any master ports that
+ * have been registered with the RIO subsystem.
+ */
+static int __init ppc_rio_init(void)
+{
+       printk(KERN_INFO "RIO: RapidIO init\n");
+
+       /* Platform specific initialization */
+       platform_rio_init();
+
+       /* Enumerate all registered ports */
+       rio_init_mports();
+
+       return 0;
+}
+
+subsys_initcall(ppc_rio_init);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/rtas_pci.c powerpc.git/arch/powerpc/kernel/rtas_pci.c
--- linux-2.6.24/arch/powerpc/kernel/rtas_pci.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/rtas_pci.c  2008-01-28 20:25:49.000000000 +0100
@@ -260,7 +260,7 @@
 
 int __devinit rtas_setup_phb(struct pci_controller *phb)
 {
-       struct device_node *dev = phb->arch_data;
+       struct device_node *dev = phb->dn;
 
        if (is_python(dev))
                python_countermeasures(dev);
@@ -280,10 +280,7 @@
        struct pci_controller *phb;
        struct device_node *root = of_find_node_by_path("/");
 
-       for (node = of_get_next_child(root, NULL);
-            node != NULL;
-            node = of_get_next_child(root, node)) {
-
+       for_each_child_of_node(root, node) {
                if (node->type == NULL || (strcmp(node->type, "pci") != 0 &&
                                           strcmp(node->type, "pciex") != 0))
                        continue;
@@ -311,10 +308,12 @@
                if (prop)
                        pci_probe_only = *prop;
 
+#ifdef CONFIG_PPC32 /* Will be made generic soon */
                prop = of_get_property(of_chosen,
                                "linux,pci-assign-all-buses", NULL);
-               if (prop)
-                       pci_assign_all_buses = *prop;
+               if (prop && *prop)
+                       ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+#endif /* CONFIG_PPC32 */
        }
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/setup-common.c powerpc.git/arch/powerpc/kernel/setup-common.c
--- linux-2.6.24/arch/powerpc/kernel/setup-common.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/setup-common.c      2008-01-28 20:25:49.000000000 +0100
@@ -33,6 +33,7 @@
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
+#include <linux/percpu.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/processor.h>
@@ -57,6 +58,7 @@
 #include <asm/mmu.h>
 #include <asm/lmb.h>
 #include <asm/xmon.h>
+#include <asm/cputhreads.h>
 
 #include "setup.h"
 
@@ -327,6 +329,31 @@
 
 #ifdef CONFIG_SMP
 
+int threads_per_core, threads_shift;
+cpumask_t threads_core_mask;
+
+static void __init cpu_init_thread_core_maps(int tpc)
+{
+       int i;
+
+       threads_per_core = tpc;
+       threads_core_mask = CPU_MASK_NONE;
+
+       /* This implementation only supports power of 2 number of threads
+        * for simplicity and performance
+        */
+       threads_shift = ilog2(tpc);
+       BUG_ON(tpc != (1 << threads_shift));
+
+       for (i = 0; i < tpc; i++)
+               cpu_set(i, threads_core_mask);
+
+       printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
+              tpc, tpc > 1 ? "s" : "");
+       printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift);
+}
+
+
 /**
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
@@ -350,22 +377,32 @@
 {
        struct device_node *dn = NULL;
        int cpu = 0;
+       int nthreads = 1;
+
+       DBG("smp_setup_cpu_maps()\n");
 
        while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
                const int *intserv;
-               int j, len = sizeof(u32), nthreads = 1;
+               int j, len;
+
+               DBG("  * %s...\n", dn->full_name);
 
                intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s",
                                &len);
-               if (intserv)
+               if (intserv) {
                        nthreads = len / sizeof(int);
-               else {
+                       DBG("    ibm,ppc-interrupt-server#s -> %d threads\n",
+                           nthreads);
+               } else {
+                       DBG("    no ibm,ppc-interrupt-server#s -> 1 thread\n");
                        intserv = of_get_property(dn, "reg", NULL);
                        if (!intserv)
                                intserv = &cpu; /* assume logical == phys */
                }
 
                for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
+                       DBG("    thread %d -> cpu %d (hard id %d)\n",
+                           j, cpu, intserv[j]);
                        cpu_set(cpu, cpu_present_map);
                        set_hard_smp_processor_id(cpu, intserv[j]);
                        cpu_set(cpu, cpu_possible_map);
@@ -373,6 +410,12 @@
                }
        }
 
+       /* If no SMT supported, nthreads is forced to 1 */
+       if (!cpu_has_feature(CPU_FTR_SMT)) {
+               DBG("  SMT disabled ! nthreads forced to 1\n");
+               nthreads = 1;
+       }
+
 #ifdef CONFIG_PPC64
        /*
         * On pSeries LPAR, we need to know how many cpus
@@ -395,7 +438,7 @@
 
                /* Double maxcpus for processors which have SMT capability */
                if (cpu_has_feature(CPU_FTR_SMT))
-                       maxcpus *= 2;
+                       maxcpus *= nthreads;
 
                if (maxcpus > NR_CPUS) {
                        printk(KERN_WARNING
@@ -412,9 +455,16 @@
        out:
                of_node_put(dn);
        }
-
        vdso_data->processorCount = num_present_cpus();
 #endif /* CONFIG_PPC64 */
+
+        /* Initialize CPU <=> thread mapping/
+        *
+        * WARNING: We assume that the number of threads is the same for
+        * every CPU in the system. If that is not the case, then some code
+        * here will have to be reworked
+        */
+       cpu_init_thread_core_maps(nthreads);
 }
 
 /*
@@ -424,17 +474,19 @@
  */
 void __init smp_setup_cpu_sibling_map(void)
 {
-#if defined(CONFIG_PPC64)
-       int cpu;
+#ifdef CONFIG_PPC64
+       int i, cpu, base;
 
-       /*
-        * Do the sibling map; assume only two threads per processor.
-        */
        for_each_possible_cpu(cpu) {
-               cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
-               if (cpu_has_feature(CPU_FTR_SMT))
-                       cpu_set(cpu ^ 0x1, per_cpu(cpu_sibling_map, cpu));
+               DBG("Sibling map for CPU %d:", cpu);
+               base = cpu_first_thread_in_core(cpu);
+               for (i = 0; i < threads_per_core; i++) {
+                       cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+                       DBG(" %d", base + i);
+               }
+               DBG("\n");
        }
+
 #endif /* CONFIG_PPC64 */
 }
 #endif /* CONFIG_SMP */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/signal_32.c powerpc.git/arch/powerpc/kernel/signal_32.c
--- linux-2.6.24/arch/powerpc/kernel/signal_32.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/signal_32.c 2008-01-28 20:25:49.000000000 +0100
@@ -24,13 +24,12 @@
 #include <linux/signal.h>
 #include <linux/errno.h>
 #include <linux/elf.h>
+#include <linux/ptrace.h>
 #ifdef CONFIG_PPC64
 #include <linux/syscalls.h>
 #include <linux/compat.h>
-#include <linux/ptrace.h>
 #else
 #include <linux/wait.h>
-#include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
 #include <linux/tty.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/smp.c powerpc.git/arch/powerpc/kernel/smp.c
--- linux-2.6.24/arch/powerpc/kernel/smp.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/smp.c       2008-01-28 20:25:49.000000000 +0100
@@ -76,6 +76,8 @@
 
 int smt_enabled_at_boot = 1;
 
+static int ipi_fail_ok;
+
 static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
 
 #ifdef CONFIG_PPC64
@@ -181,12 +183,13 @@
  * <wait> If true, wait (atomically) until function has completed on other CPUs.
  * [RETURNS] 0 on success, else a negative status code. Does not return until
  * remote CPUs are nearly ready to execute <<func>> or are or have executed.
+ * <map> is a cpu map of the cpus to send IPI to.
  *
  * You must not call this function with disabled interrupts or from a
  * hardware interrupt handler or from a bottom half handler.
  */
-int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic,
-                       int wait, cpumask_t map)
+static int __smp_call_function_map(void (*func) (void *info), void *info,
+                                  int nonatomic, int wait, cpumask_t map)
 {
        struct call_data_struct data;
        int ret = -1, num_cpus;
@@ -203,8 +206,6 @@
        if (wait)
                atomic_set(&data.finished, 0);
 
-       spin_lock(&call_lock);
-
        /* remove 'self' from the map */
        if (cpu_isset(smp_processor_id(), map))
                cpu_clear(smp_processor_id(), map);
@@ -231,7 +232,8 @@
                        printk("smp_call_function on cpu %d: other cpus not "
                                "responding (%d)\n", smp_processor_id(),
                                atomic_read(&data.started));
-                       debugger(NULL);
+                       if (!ipi_fail_ok)
+                               debugger(NULL);
                        goto out;
                }
        }
@@ -258,14 +260,18 @@
  out:
        call_data = NULL;
        HMT_medium();
-       spin_unlock(&call_lock);
        return ret;
 }
 
 static int __smp_call_function(void (*func)(void *info), void *info,
                               int nonatomic, int wait)
 {
-       return smp_call_function_map(func,info,nonatomic,wait,cpu_online_map);
+       int ret;
+       spin_lock(&call_lock);
+       ret =__smp_call_function_map(func, info, nonatomic, wait,
+                                      cpu_online_map);
+       spin_unlock(&call_lock);
+       return ret;
 }
 
 int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
@@ -278,8 +284,8 @@
 }
 EXPORT_SYMBOL(smp_call_function);
 
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info, int nonatomic,
-                       int wait)
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+                            int nonatomic, int wait)
 {
        cpumask_t map = CPU_MASK_NONE;
        int ret = 0;
@@ -291,9 +297,11 @@
                return -EINVAL;
 
        cpu_set(cpu, map);
-       if (cpu != get_cpu())
-               ret = smp_call_function_map(func,info,nonatomic,wait,map);
-       else {
+       if (cpu != get_cpu()) {
+               spin_lock(&call_lock);
+               ret = __smp_call_function_map(func, info, nonatomic, wait, map);
+               spin_unlock(&call_lock);
+       } else {
                local_irq_disable();
                func(info);
                local_irq_enable();
@@ -305,7 +313,22 @@
 
 void smp_send_stop(void)
 {
-       __smp_call_function(stop_this_cpu, NULL, 1, 0);
+       int nolock;
+
+       /* It's OK to fail sending the IPI, since the alternative is to
+        * be stuck forever waiting on the other CPU to take the interrupt.
+        *
+        * It's better to at least continue and go through reboot, since this
+        * function is usually called at panic or reboot time in the first
+        * place.
+        */
+       ipi_fail_ok = 1;
+
+       /* Don't deadlock in case we got called through panic */
+       nolock = !spin_trylock(&call_lock);
+       __smp_call_function_map(stop_this_cpu, NULL, 1, 0, cpu_online_map);
+       if (!nolock)
+               spin_unlock(&call_lock);
 }
 
 void smp_call_function_interrupt(void)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/systbl_chk.c powerpc.git/arch/powerpc/kernel/systbl_chk.c
--- linux-2.6.24/arch/powerpc/kernel/systbl_chk.c       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/systbl_chk.c        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,58 @@
+/*
+ * This file, when run through CPP produces a list of syscall numbers
+ * in the order of systbl.h.  That way we can check for gaps and syscalls
+ * that are out of order.
+ *
+ * Unfortunately, we cannot check for the correct ordering of entries
+ * using SYSX().
+ *
+ * Copyright © IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/unistd.h>
+
+#define SYSCALL(func)          __NR_##func
+#define COMPAT_SYS(func)       __NR_##func
+#define PPC_SYS(func)          __NR_##func
+#ifdef CONFIG_PPC64
+#define OLDSYS(func)           -1
+#define SYS32ONLY(func)                -1
+#else
+#define OLDSYS(func)           __NR_old##func
+#define SYS32ONLY(func)                __NR_##func
+#endif
+#define SYSX(f, f3264, f32)    -1
+
+#define SYSCALL_SPU(func)      SYSCALL(func)
+#define COMPAT_SYS_SPU(func)   COMPAT_SYS(func)
+#define PPC_SYS_SPU(func)      PPC_SYS(func)
+#define SYSX_SPU(f, f3264, f32)        SYSX(f, f3264, f32)
+
+/* Just insert a marker for ni_syscalls */
+#define        __NR_ni_syscall         -1
+
+/*
+ * These are the known exceptions.
+ * Hopefully, there will be no more.
+ */
+#define        __NR_llseek             __NR__llseek
+#undef __NR_umount
+#define        __NR_umount             __NR_umount2
+#define        __NR_old_getrlimit      __NR_getrlimit
+#define        __NR_newstat            __NR_stat
+#define        __NR_newlstat           __NR_lstat
+#define        __NR_newfstat           __NR_fstat
+#define        __NR_newuname           __NR_uname
+#define        __NR_sysctl             __NR__sysctl
+#define __NR_olddebug_setcontext       __NR_sys_debug_setcontext
+
+/* We call sys_ugetrlimit for syscall number __NR_getrlimit */
+#define getrlimit              ugetrlimit
+
+START_TABLE
+#include <asm/systbl.h>
+END_TABLE __NR_syscalls
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/systbl_chk.sh powerpc.git/arch/powerpc/kernel/systbl_chk.sh
--- linux-2.6.24/arch/powerpc/kernel/systbl_chk.sh      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/systbl_chk.sh       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# Just process the CPP output from systbl_chk.c and complain
+# if anything is out of order.
+#
+# Copyright © 2008 IBM Corporation
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+
+awk    'BEGIN { num = -1; }    # Ignore the beginning of the file
+       /^#/ { next; }
+       /^[ \t]*$/ { next; }
+       /^START_TABLE/ { num = 0; next; }
+       /^END_TABLE/ {
+               if (num != $2) {
+                       printf "__NR_syscalls (%s) is not one more than the last syscall (%s)\n",
+                               $2, num - 1;
+                       exit(1);
+               }
+               num = -1;       # Ignore the rest of the file
+       }
+       {
+               if (num == -1) next;
+               if (($1 != -1) && ($1 != num)) {
+                       printf "Syscall %s out of order (expected %s)\n",
+                               $1, num;
+                       exit(1);
+               };
+               num++;
+       }' "$1"
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/time.c powerpc.git/arch/powerpc/kernel/time.c
--- linux-2.6.24/arch/powerpc/kernel/time.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/time.c      2008-01-28 20:25:49.000000000 +0100
@@ -116,9 +116,12 @@
        .features       = CLOCK_EVT_FEAT_ONESHOT,
 };
 
-static DEFINE_PER_CPU(struct clock_event_device, decrementers);
-void init_decrementer_clockevent(void);
-static DEFINE_PER_CPU(u64, decrementer_next_tb);
+struct decrementer_clock {
+       struct clock_event_device event;
+       u64 next_tb;
+};
+
+static DEFINE_PER_CPU(struct decrementer_clock, decrementers);
 
 #ifdef CONFIG_PPC_ISERIES
 static unsigned long __initdata iSeries_recal_titan;
@@ -216,7 +219,11 @@
  */
 static u64 read_spurr(u64 purr)
 {
-       if (cpu_has_feature(CPU_FTR_SPURR))
+       /*
+        * cpus without PURR won't have a SPURR
+        * We already know the former when we use this, so tell gcc
+        */
+       if (cpu_has_feature(CPU_FTR_PURR) && cpu_has_feature(CPU_FTR_SPURR))
                return mfspr(SPRN_SPURR);
        return purr;
 }
@@ -227,29 +234,30 @@
  */
 void account_system_vtime(struct task_struct *tsk)
 {
-       u64 now, nowscaled, delta, deltascaled;
+       u64 now, nowscaled, delta, deltascaled, sys_time;
        unsigned long flags;
 
        local_irq_save(flags);
        now = read_purr();
-       delta = now - get_paca()->startpurr;
-       get_paca()->startpurr = now;
        nowscaled = read_spurr(now);
+       delta = now - get_paca()->startpurr;
        deltascaled = nowscaled - get_paca()->startspurr;
+       get_paca()->startpurr = now;
        get_paca()->startspurr = nowscaled;
        if (!in_interrupt()) {
                /* deltascaled includes both user and system time.
                 * Hence scale it based on the purr ratio to estimate
                 * the system time */
+               sys_time = get_paca()->system_time;
                if (get_paca()->user_time)
-                       deltascaled = deltascaled * get_paca()->system_time /
-                            (get_paca()->system_time + get_paca()->user_time);
-               delta += get_paca()->system_time;
+                       deltascaled = deltascaled * sys_time /
+                            (sys_time + get_paca()->user_time);
+               delta += sys_time;
                get_paca()->system_time = 0;
        }
        account_system_time(tsk, 0, delta);
-       get_paca()->purrdelta = delta;
        account_system_time_scaled(tsk, deltascaled);
+       get_paca()->purrdelta = delta;
        get_paca()->spurrdelta = deltascaled;
        local_irq_restore(flags);
 }
@@ -326,11 +334,9 @@
        s64 stolen;
        struct cpu_purr_data *pme;
 
-       if (!cpu_has_feature(CPU_FTR_PURR))
-               return;
-       pme = &per_cpu(cpu_purr_data, smp_processor_id());
+       pme = &__get_cpu_var(cpu_purr_data);
        if (!pme->initialized)
-               return;         /* this can happen in early boot */
+               return;         /* !CPU_FTR_PURR or early in early boot */
        tb = mftb();
        purr = mfspr(SPRN_PURR);
        stolen = (tb - pme->tb) - (purr - pme->purr);
@@ -353,7 +359,7 @@
        if (!cpu_has_feature(CPU_FTR_PURR))
                return;
        local_irq_save(flags);
-       pme = &per_cpu(cpu_purr_data, smp_processor_id());
+       pme = &__get_cpu_var(cpu_purr_data);
        pme->tb = mftb();
        pme->purr = mfspr(SPRN_PURR);
        pme->initialized = 1;
@@ -556,8 +562,8 @@
 void timer_interrupt(struct pt_regs * regs)
 {
        struct pt_regs *old_regs;
-       int cpu = smp_processor_id();
-       struct clock_event_device *evt = &per_cpu(decrementers, cpu);
+       struct decrementer_clock *decrementer =  &__get_cpu_var(decrementers);
+       struct clock_event_device *evt = &decrementer->event;
        u64 now;
 
        /* Ensure a positive value is written to the decrementer, or else
@@ -570,9 +576,9 @@
 #endif
 
        now = get_tb_or_rtc();
-       if (now < per_cpu(decrementer_next_tb, cpu)) {
+       if (now < decrementer->next_tb) {
                /* not time for this event yet */
-               now = per_cpu(decrementer_next_tb, cpu) - now;
+               now = decrementer->next_tb - now;
                if (now <= DECREMENTER_MAX)
                        set_dec((int)now);
                return;
@@ -623,6 +629,45 @@
        set_dec(ticks);
 }
 
+#ifdef CONFIG_SUSPEND
+void generic_suspend_disable_irqs(void)
+{
+       preempt_disable();
+
+       /* Disable the decrementer, so that it doesn't interfere
+        * with suspending.
+        */
+
+       set_dec(0x7fffffff);
+       local_irq_disable();
+       set_dec(0x7fffffff);
+}
+
+void generic_suspend_enable_irqs(void)
+{
+       wakeup_decrementer();
+
+       local_irq_enable();
+       preempt_enable();
+}
+
+/* Overrides the weak version in kernel/power/main.c */
+void arch_suspend_disable_irqs(void)
+{
+       if (ppc_md.suspend_disable_irqs)
+               ppc_md.suspend_disable_irqs();
+       generic_suspend_disable_irqs();
+}
+
+/* Overrides the weak version in kernel/power/main.c */
+void arch_suspend_enable_irqs(void)
+{
+       generic_suspend_enable_irqs();
+       if (ppc_md.suspend_enable_irqs)
+               ppc_md.suspend_enable_irqs();
+}
+#endif
+
 #ifdef CONFIG_SMP
 void __init smp_space_timers(unsigned int max_cpus)
 {
@@ -811,7 +856,7 @@
 static int decrementer_set_next_event(unsigned long evt,
                                      struct clock_event_device *dev)
 {
-       __get_cpu_var(decrementer_next_tb) = get_tb_or_rtc() + evt;
+       __get_cpu_var(decrementers).next_tb = get_tb_or_rtc() + evt;
        set_dec(evt);
        return 0;
 }
@@ -825,7 +870,7 @@
 
 static void register_decrementer_clockevent(int cpu)
 {
-       struct clock_event_device *dec = &per_cpu(decrementers, cpu);
+       struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
 
        *dec = decrementer_clockevent;
        dec->cpumask = cpumask_of_cpu(cpu);
@@ -836,7 +881,7 @@
        clockevents_register_device(dec);
 }
 
-void init_decrementer_clockevent(void)
+static void __init init_decrementer_clockevent(void)
 {
        int cpu = smp_processor_id();
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/traps.c powerpc.git/arch/powerpc/kernel/traps.c
--- linux-2.6.24/arch/powerpc/kernel/traps.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/traps.c     2008-01-28 20:25:49.000000000 +0100
@@ -334,18 +334,25 @@
 #define clear_single_step(regs)        ((regs)->msr &= ~MSR_SE)
 #endif
 
-static int generic_machine_check_exception(struct pt_regs *regs)
+#if defined(CONFIG_4xx)
+int machine_check_4xx(struct pt_regs *regs)
 {
        unsigned long reason = get_mc_reason(regs);
 
-#if defined(CONFIG_4xx) && !defined(CONFIG_440A)
        if (reason & ESR_IMCP) {
                printk("Instruction");
                mtspr(SPRN_ESR, reason & ~ESR_IMCP);
        } else
                printk("Data");
        printk(" machine check in kernel mode.\n");
-#elif defined(CONFIG_440A)
+
+       return 0;
+}
+
+int machine_check_440A(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        if (reason & ESR_IMCP){
                printk("Instruction Synchronous Machine Check exception\n");
@@ -375,7 +382,13 @@
                /* Clear MCSR */
                mtspr(SPRN_MCSR, mcsr);
        }
-#elif defined (CONFIG_E500)
+       return 0;
+}
+#elif defined(CONFIG_E500)
+int machine_check_e500(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        printk("Caused by (from MCSR=%lx): ", reason);
 
@@ -403,7 +416,14 @@
                printk("Bus - Instruction Parity Error\n");
        if (reason & MCSR_BUS_RPERR)
                printk("Bus - Read Parity Error\n");
-#elif defined (CONFIG_E200)
+
+       return 0;
+}
+#elif defined(CONFIG_E200)
+int machine_check_e200(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        printk("Caused by (from MCSR=%lx): ", reason);
 
@@ -421,7 +441,14 @@
                printk("Bus - Read Bus Error on data load\n");
        if (reason & MCSR_BUS_WRERR)
                printk("Bus - Write Bus Error on buffered store or cache line push\n");
-#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */
+
+       return 0;
+}
+#else
+int machine_check_generic(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        printk("Caused by (from SRR1=%lx): ", reason);
        switch (reason & 0x601F0000) {
@@ -451,22 +478,26 @@
        default:
                printk("Unknown values in msr\n");
        }
-#endif /* CONFIG_4xx */
-
        return 0;
 }
+#endif /* everything else */
 
 void machine_check_exception(struct pt_regs *regs)
 {
        int recover = 0;
 
-       /* See if any machine dependent calls */
+       /* See if any machine dependent calls. In theory, we would want
+        * to call the CPU first, and call the ppc_md. one if the CPU
+        * one returns a positive number. However there is existing code
+        * that assumes the board gets a first chance, so let's keep it
+        * that way for now and fix things later. --BenH.
+        */
        if (ppc_md.machine_check_exception)
                recover = ppc_md.machine_check_exception(regs);
-       else
-               recover = generic_machine_check_exception(regs);
+       else if (cur_cpu_spec->machine_check)
+               recover = cur_cpu_spec->machine_check(regs);
 
-       if (recover)
+       if (recover > 0)
                return;
 
        if (user_mode(regs)) {
@@ -476,7 +507,12 @@
        }
 
 #if defined(CONFIG_8xx) && defined(CONFIG_PCI)
-       /* the qspan pci read routines can cause machine checks -- Cort */
+       /* the qspan pci read routines can cause machine checks -- Cort
+        *
+        * yuck !!! that totally needs to go away ! There are better ways
+        * to deal with that than having a wart in the mcheck handler.
+        * -- BenH
+        */
        bad_page_fault(regs, regs->dar, SIGBUS);
        return;
 #endif
@@ -622,6 +658,9 @@
 #define INST_POPCNTB           0x7c0000f4
 #define INST_POPCNTB_MASK      0xfc0007fe
 
+#define INST_ISEL              0x7c00001e
+#define INST_ISEL_MASK         0xfc00003e
+
 static int emulate_string_inst(struct pt_regs *regs, u32 instword)
 {
        u8 rT = (instword >> 21) & 0x1f;
@@ -707,6 +746,23 @@
        return 0;
 }
 
+static int emulate_isel(struct pt_regs *regs, u32 instword)
+{
+       u8 rT = (instword >> 21) & 0x1f;
+       u8 rA = (instword >> 16) & 0x1f;
+       u8 rB = (instword >> 11) & 0x1f;
+       u8 BC = (instword >> 6) & 0x1f;
+       u8 bit;
+       unsigned long tmp;
+
+       tmp = (rA == 0) ? 0 : regs->gpr[rA];
+       bit = (regs->ccr >> (31 - BC)) & 0x1;
+
+       regs->gpr[rT] = bit ? tmp : regs->gpr[rB];
+
+       return 0;
+}
+
 static int emulate_instruction(struct pt_regs *regs)
 {
        u32 instword;
@@ -749,6 +805,11 @@
                return emulate_popcntb_inst(regs, instword);
        }
 
+       /* Emulate isel (Integer Select) instruction */
+       if ((instword & INST_ISEL_MASK) == INST_ISEL) {
+               return emulate_isel(regs, instword);
+       }
+
        return -EINVAL;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/udbg.c powerpc.git/arch/powerpc/kernel/udbg.c
--- linux-2.6.24/arch/powerpc/kernel/udbg.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/udbg.c      2008-01-28 20:25:49.000000000 +0100
@@ -54,9 +54,16 @@
 #elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
        /* PPC44x debug */
        udbg_init_44x_as1();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_40x)
+       /* PPC40x debug */
+       udbg_init_40x_realmode();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
        udbg_init_cpm();
 #endif
+
+#ifdef CONFIG_PPC_EARLY_DEBUG
+       console_loglevel = 10;
+#endif
 }
 
 /* udbg library, used by xmon et al */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/kernel/udbg_16550.c powerpc.git/arch/powerpc/kernel/udbg_16550.c
--- linux-2.6.24/arch/powerpc/kernel/udbg_16550.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/kernel/udbg_16550.c        2008-01-28 20:25:49.000000000 +0100
@@ -46,7 +46,7 @@
 
 #define LCR_DLAB 0x80
 
-static volatile struct NS16550 __iomem *udbg_comport;
+static struct NS16550 __iomem *udbg_comport;
 
 static void udbg_550_putc(char c)
 {
@@ -117,7 +117,7 @@
 {
        unsigned int dll, dlm, divisor, prescaler, speed;
        u8 old_lcr;
-       volatile struct NS16550 __iomem *port = comport;
+       struct NS16550 __iomem *port = comport;
 
        old_lcr = in_8(&port->lcr);
 
@@ -162,7 +162,7 @@
 
 void __init udbg_init_maple_realmode(void)
 {
-       udbg_comport = (volatile struct NS16550 __iomem *)0xf40003f8;
+       udbg_comport = (struct NS16550 __iomem *)0xf40003f8;
 
        udbg_putc = udbg_maple_real_putc;
        udbg_getc = NULL;
@@ -184,7 +184,7 @@
 
 void udbg_init_pas_realmode(void)
 {
-       udbg_comport = (volatile struct NS16550 __iomem *)0xfcff03f8UL;
+       udbg_comport = (struct NS16550 __iomem *)0xfcff03f8UL;
 
        udbg_putc = udbg_pas_real_putc;
        udbg_getc = NULL;
@@ -219,9 +219,42 @@
 void __init udbg_init_44x_as1(void)
 {
        udbg_comport =
-               (volatile struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR;
+               (struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR;
 
        udbg_putc = udbg_44x_as1_putc;
        udbg_getc = udbg_44x_as1_getc;
 }
 #endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_40x
+static void udbg_40x_real_putc(char c)
+{
+       if (udbg_comport) {
+               while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
+                       /* wait for idle */;
+               real_writeb(c, &udbg_comport->thr); eieio();
+               if (c == '\n')
+                       udbg_40x_real_putc('\r');
+       }
+}
+
+static int udbg_40x_real_getc(void)
+{
+       if (udbg_comport) {
+               while ((real_readb(&udbg_comport->lsr) & LSR_DR) == 0)
+                       ; /* wait for char */
+               return real_readb(&udbg_comport->rbr);
+       }
+       return -1;
+}
+
+void __init udbg_init_40x_realmode(void)
+{
+       udbg_comport = (struct NS16550 __iomem *)
+               CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR;
+
+       udbg_putc = udbg_40x_real_putc;
+       udbg_getc = udbg_40x_real_getc;
+       udbg_getc_poll = NULL;
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/math-emu/op-4.h powerpc.git/arch/powerpc/math-emu/op-4.h
--- linux-2.6.24/arch/powerpc/math-emu/op-4.h   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/math-emu/op-4.h    2008-01-28 20:25:49.000000000 +0100
@@ -194,19 +194,39 @@
   (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
 
 #ifndef __FP_FRAC_ADD_4
-#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)           \
-  (r0 = x0 + y0,                                                       \
-   r1 = x1 + y1 + (r0 < x0),                                           \
-   r2 = x2 + y2 + (r1 < x1),                                           \
-   r3 = x3 + y3 + (r2 < x2))
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)   \
+  do {                                                         \
+    int _c1, _c2, _c3;                                         \
+    r0 = x0 + y0;                                              \
+    _c1 = r0 < x0;                                             \
+    r1 = x1 + y1;                                              \
+    _c2 = r1 < x1;                                             \
+    r1 += _c1;                                                 \
+    _c2 |= r1 < _c1;                                           \
+    r2 = x2 + y2;                                              \
+    _c3 = r2 < x2;                                             \
+    r2 += _c2;                                                 \
+    _c3 |= r2 < _c2;                                           \
+    r3 = x3 + y3 + _c3;                                                \
+  } while (0)
 #endif
 
 #ifndef __FP_FRAC_SUB_4
-#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)           \
-  (r0 = x0 - y0,                                                        \
-   r1 = x1 - y1 - (r0 > x0),                                            \
-   r2 = x2 - y2 - (r1 > x1),                                            \
-   r3 = x3 - y3 - (r2 > x2))
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)   \
+  do {                                                         \
+    int _c1, _c2, _c3;                                         \
+    r0 = x0 - y0;                                              \
+    _c1 = r0 > x0;                                             \
+    r1 = x1 - y1;                                              \
+    _c2 = r1 > x1;                                             \
+    r1 -= _c1;                                                 \
+    _c2 |= r1 > _c1;                                           \
+    r2 = x2 - y2;                                              \
+    _c3 = r2 > x2;                                             \
+    r2 -= _c2;                                                 \
+    _c3 |= r2 > _c2;                                           \
+    r3 = x3 - y3 - _c3;                                                \
+  } while (0)
 #endif
 
 #ifndef __FP_FRAC_ADDI_4
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/fault.c powerpc.git/arch/powerpc/mm/fault.c
--- linux-2.6.24/arch/powerpc/mm/fault.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/fault.c 2008-01-28 20:25:49.000000000 +0100
@@ -167,10 +167,8 @@
        if (notify_page_fault(regs))
                return 0;
 
-       if (trap == 0x300) {
-               if (debugger_fault_handler(regs))
-                       return 0;
-       }
+       if (unlikely(debugger_fault_handler(regs)))
+               return 0;
 
        /* On a kernel SLB miss we can only check for a valid exception entry */
        if (!user_mode(regs) && (address >= TASK_SIZE))
@@ -189,7 +187,7 @@
                        return SIGSEGV;
                /* in_atomic() in user mode is really bad,
                   as is current->mm == NULL. */
-               printk(KERN_EMERG "Page fault in user mode with"
+               printk(KERN_EMERG "Page fault in user mode with "
                       "in_atomic() = %d mm = %p\n", in_atomic(), mm);
                printk(KERN_EMERG "NIP = %lx  MSR = %lx\n",
                       regs->nip, regs->msr);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/fsl_booke_mmu.c powerpc.git/arch/powerpc/mm/fsl_booke_mmu.c
--- linux-2.6.24/arch/powerpc/mm/fsl_booke_mmu.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/fsl_booke_mmu.c 2008-01-28 20:25:49.000000000 +0100
@@ -165,15 +165,15 @@
 void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
                unsigned long cam2)
 {
-       settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
+       settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
        tlbcam_index++;
        if (cam1) {
                tlbcam_index++;
-               settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
+               settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
        }
        if (cam2) {
                tlbcam_index++;
-               settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+               settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
        }
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/hash_utils_64.c powerpc.git/arch/powerpc/mm/hash_utils_64.c
--- linux-2.6.24/arch/powerpc/mm/hash_utils_64.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/hash_utils_64.c 2008-01-28 21:37:04.000000000 +0100
@@ -96,6 +96,7 @@
 int mmu_io_psize = MMU_PAGE_4K;
 int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
+u16 mmu_slb_size = 64;
 #ifdef CONFIG_HUGETLB_PAGE
 int mmu_huge_psize = MMU_PAGE_16M;
 unsigned int HPAGE_SHIFT;
@@ -368,18 +369,11 @@
         * on what is available
         */
        if (mmu_psize_defs[MMU_PAGE_16M].shift)
-               mmu_huge_psize = MMU_PAGE_16M;
+               set_huge_psize(MMU_PAGE_16M);
        /* With 4k/4level pagetables, we can't (for now) cope with a
         * huge page size < PMD_SIZE */
        else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-               mmu_huge_psize = MMU_PAGE_1M;
-
-       /* Calculate HPAGE_SHIFT and sanity check it */
-       if (mmu_psize_defs[mmu_huge_psize].shift > MIN_HUGEPTE_SHIFT &&
-           mmu_psize_defs[mmu_huge_psize].shift < SID_SHIFT)
-               HPAGE_SHIFT = mmu_psize_defs[mmu_huge_psize].shift;
-       else
-               HPAGE_SHIFT = 0; /* No huge pages dude ! */
+               set_huge_psize(MMU_PAGE_1M);
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/hugetlbpage.c powerpc.git/arch/powerpc/mm/hugetlbpage.c
--- linux-2.6.24/arch/powerpc/mm/hugetlbpage.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/hugetlbpage.c   2008-01-28 20:25:49.000000000 +0100
@@ -24,18 +24,17 @@
 #include <asm/cputable.h>
 #include <asm/spu.h>
 
+#define HPAGE_SHIFT_64K        16
+#define HPAGE_SHIFT_16M        24
+
 #define NUM_LOW_AREAS  (0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT)
 
-#ifdef CONFIG_PPC_64K_PAGES
-#define HUGEPTE_INDEX_SIZE     (PMD_SHIFT-HPAGE_SHIFT)
-#else
-#define HUGEPTE_INDEX_SIZE     (PUD_SHIFT-HPAGE_SHIFT)
-#endif
-#define PTRS_PER_HUGEPTE       (1 << HUGEPTE_INDEX_SIZE)
-#define HUGEPTE_TABLE_SIZE     (sizeof(pte_t) << HUGEPTE_INDEX_SIZE)
+unsigned int hugepte_shift;
+#define PTRS_PER_HUGEPTE       (1 << hugepte_shift)
+#define HUGEPTE_TABLE_SIZE     (sizeof(pte_t) << hugepte_shift)
 
-#define HUGEPD_SHIFT           (HPAGE_SHIFT + HUGEPTE_INDEX_SIZE)
+#define HUGEPD_SHIFT           (HPAGE_SHIFT + hugepte_shift)
 #define HUGEPD_SIZE            (1UL << HUGEPD_SHIFT)
 #define HUGEPD_MASK            (~(HUGEPD_SIZE-1))
 
@@ -82,11 +81,35 @@
        return 0;
 }
 
+/* Base page size affects how we walk hugetlb page tables */
+#ifdef CONFIG_PPC_64K_PAGES
+#define hpmd_offset(pud, addr)         pmd_offset(pud, addr)
+#define hpmd_alloc(mm, pud, addr)      pmd_alloc(mm, pud, addr)
+#else
+static inline
+pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
+{
+       if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+               return pmd_offset(pud, addr);
+       else
+               return (pmd_t *) pud;
+}
+static inline
+pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
+{
+       if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+               return pmd_alloc(mm, pud, addr);
+       else
+               return (pmd_t *) pud;
+}
+#endif
+
 /* Modelled after find_linux_pte() */
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
        pgd_t *pg;
        pud_t *pu;
+       pmd_t *pm;
 
        BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
 
@@ -96,14 +119,9 @@
        if (!pgd_none(*pg)) {
                pu = pud_offset(pg, addr);
                if (!pud_none(*pu)) {
-#ifdef CONFIG_PPC_64K_PAGES
-                       pmd_t *pm;
-                       pm = pmd_offset(pu, addr);
+                       pm = hpmd_offset(pu, addr);
                        if (!pmd_none(*pm))
                                return hugepte_offset((hugepd_t *)pm, addr);
-#else
-                       return hugepte_offset((hugepd_t *)pu, addr);
-#endif
                }
        }
 
@@ -114,6 +132,7 @@
 {
        pgd_t *pg;
        pud_t *pu;
+       pmd_t *pm;
        hugepd_t *hpdp = NULL;
 
        BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
@@ -124,14 +143,9 @@
        pu = pud_alloc(mm, pg, addr);
 
        if (pu) {
-#ifdef CONFIG_PPC_64K_PAGES
-               pmd_t *pm;
-               pm = pmd_alloc(mm, pu, addr);
+               pm = hpmd_alloc(mm, pu, addr);
                if (pm)
                        hpdp = (hugepd_t *)pm;
-#else
-               hpdp = (hugepd_t *)pu;
-#endif
        }
 
        if (! hpdp)
@@ -158,7 +172,6 @@
                                                 PGF_CACHENUM_MASK));
 }
 
-#ifdef CONFIG_PPC_64K_PAGES
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
                                   unsigned long addr, unsigned long end,
                                   unsigned long floor, unsigned long ceiling)
@@ -191,7 +204,6 @@
        pud_clear(pud);
        pmd_free_tlb(tlb, pmd);
 }
-#endif
 
 static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
                                   unsigned long addr, unsigned long end,
@@ -210,9 +222,15 @@
                        continue;
                hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
 #else
-               if (pud_none(*pud))
-                       continue;
-               free_hugepte_range(tlb, (hugepd_t *)pud);
+               if (HPAGE_SHIFT == HPAGE_SHIFT_64K) {
+                       if (pud_none_or_clear_bad(pud))
+                               continue;
+                       hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+               } else {
+                       if (pud_none(*pud))
+                               continue;
+                       free_hugepte_range(tlb, (hugepd_t *)pud);
+               }
 #endif
        } while (pud++, addr = next, addr != end);
 
@@ -526,6 +544,57 @@
        return err;
 }
 
+void set_huge_psize(int psize)
+{
+       /* Check that it is a page size supported by the hardware and
+        * that it fits within pagetable limits. */
+       if (mmu_psize_defs[psize].shift && mmu_psize_defs[psize].shift < SID_SHIFT &&
+               (mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
+                       mmu_psize_defs[psize].shift == HPAGE_SHIFT_64K)) {
+               HPAGE_SHIFT = mmu_psize_defs[psize].shift;
+               mmu_huge_psize = psize;
+#ifdef CONFIG_PPC_64K_PAGES
+               hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
+#else
+               if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+                       hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
+               else
+                       hugepte_shift = (PUD_SHIFT-HPAGE_SHIFT);
+#endif
+
+       } else
+               HPAGE_SHIFT = 0;
+}
+
+static int __init hugepage_setup_sz(char *str)
+{
+       unsigned long long size;
+       int mmu_psize = -1;
+       int shift;
+
+       size = memparse(str, &str);
+
+       shift = __ffs(size);
+       switch (shift) {
+#ifndef CONFIG_PPC_64K_PAGES
+       case HPAGE_SHIFT_64K:
+               mmu_psize = MMU_PAGE_64K;
+               break;
+#endif
+       case HPAGE_SHIFT_16M:
+               mmu_psize = MMU_PAGE_16M;
+               break;
+       }
+
+       if (mmu_psize >=0 && mmu_psize_defs[mmu_psize].shift)
+               set_huge_psize(mmu_psize);
+       else
+               printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
+
+       return 1;
+}
+__setup("hugepagesz=", hugepage_setup_sz);
+
 static void zero_ctor(struct kmem_cache *cache, void *addr)
 {
        memset(addr, 0, kmem_cache_size(cache));
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/lmb.c powerpc.git/arch/powerpc/mm/lmb.c
--- linux-2.6.24/arch/powerpc/mm/lmb.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/lmb.c   2008-01-28 20:25:49.000000000 +0100
@@ -342,3 +342,16 @@
                }
        }
 }
+
+int __init lmb_is_reserved(unsigned long addr)
+{
+       int i;
+
+       for (i = 0; i < lmb.reserved.cnt; i++) {
+               unsigned long upper = lmb.reserved.region[i].base +
+                                     lmb.reserved.region[i].size - 1;
+               if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
+                       return 1;
+       }
+       return 0;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/mem.c powerpc.git/arch/powerpc/mm/mem.c
--- linux-2.6.24/arch/powerpc/mm/mem.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/mem.c   2008-01-28 20:25:49.000000000 +0100
@@ -213,15 +213,30 @@
         */
 #ifdef CONFIG_HIGHMEM
        free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
+
+       /* reserve the sections we're already using */
+       for (i = 0; i < lmb.reserved.cnt; i++) {
+               unsigned long addr = lmb.reserved.region[i].base +
+                                    lmb_size_bytes(&lmb.reserved, i) - 1;
+               if (addr < total_lowmem)
+                       reserve_bootmem(lmb.reserved.region[i].base,
+                                       lmb_size_bytes(&lmb.reserved, i));
+               else if (lmb.reserved.region[i].base < total_lowmem) {
+                       unsigned long adjusted_size = total_lowmem -
+                                     lmb.reserved.region[i].base;
+                       reserve_bootmem(lmb.reserved.region[i].base,
+                                       adjusted_size);
+               }
+       }
 #else
        free_bootmem_with_active_regions(0, max_pfn);
-#endif
 
        /* reserve the sections we're already using */
        for (i = 0; i < lmb.reserved.cnt; i++)
                reserve_bootmem(lmb.reserved.region[i].base,
                                lmb_size_bytes(&lmb.reserved, i));
 
+#endif
        /* XXX need to clip this if using highmem? */
        sparse_memory_present_with_active_regions(0);
 
@@ -334,11 +349,13 @@
                highmem_mapnr = total_lowmem >> PAGE_SHIFT;
                for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
                        struct page *page = pfn_to_page(pfn);
-
+                       if (lmb_is_reserved(pfn << PAGE_SHIFT))
+                               continue;
                        ClearPageReserved(page);
                        init_page_count(page);
                        __free_page(page);
                        totalhigh_pages++;
+                       reservedpages--;
                }
                totalram_pages += totalhigh_pages;
                printk(KERN_DEBUG "High memory: %luk\n",
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/slb.c powerpc.git/arch/powerpc/mm/slb.c
--- linux-2.6.24/arch/powerpc/mm/slb.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/slb.c   2008-01-28 20:25:49.000000000 +0100
@@ -256,6 +256,7 @@
        static int slb_encoding_inited;
        extern unsigned int *slb_miss_kernel_load_linear;
        extern unsigned int *slb_miss_kernel_load_io;
+       extern unsigned int *slb_compare_rr_to_size;
 
        /* Prepare our SLB miss handler based on our page size */
        linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
@@ -269,6 +270,8 @@
                                   SLB_VSID_KERNEL | linear_llp);
                patch_slb_encoding(slb_miss_kernel_load_io,
                                   SLB_VSID_KERNEL | io_llp);
+               patch_slb_encoding(slb_compare_rr_to_size,
+                                  mmu_slb_size);
 
                DBG("SLB: linear  LLP = %04x\n", linear_llp);
                DBG("SLB: io      LLP = %04x\n", io_llp);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/mm/slb_low.S powerpc.git/arch/powerpc/mm/slb_low.S
--- linux-2.6.24/arch/powerpc/mm/slb_low.S      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/mm/slb_low.S       2008-01-28 20:25:49.000000000 +0100
@@ -227,8 +227,9 @@
 
 7:     ld      r10,PACASTABRR(r13)
        addi    r10,r10,1
-       /* use a cpu feature mask if we ever change our slb size */
-       cmpldi  r10,SLB_NUM_ENTRIES
+       /* This gets soft patched on boot. */
+_GLOBAL(slb_compare_rr_to_size)
+       cmpldi  r10,0
 
        blt+    4f
        li      r10,SLB_NUM_BOLTED
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/oprofile/op_model_cell.c powerpc.git/arch/powerpc/oprofile/op_model_cell.c
--- linux-2.6.24/arch/powerpc/oprofile/op_model_cell.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/oprofile/op_model_cell.c   2008-01-28 20:25:49.000000000 +0100
@@ -61,7 +61,7 @@
 #define NUM_THREADS 2         /* number of physical threads in
                               * physical processor
                               */
-#define NUM_TRACE_BUS_WORDS 4
+#define NUM_DEBUG_BUS_WORDS 4
 #define NUM_INPUT_BUS_WORDS 2
 
 #define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */
@@ -169,7 +169,6 @@
 
 static u32 ctr_enabled;
 
-static unsigned char trace_bus[NUM_TRACE_BUS_WORDS];
 static unsigned char input_bus[NUM_INPUT_BUS_WORDS];
 
 /*
@@ -298,7 +297,7 @@
 
        p->signal_group = event / 100;
        p->bus_word = bus_word;
-       p->sub_unit = (unit_mask & 0x0000f000) >> 12;
+       p->sub_unit = GET_SUB_UNIT(unit_mask);
 
        pm_regs.pm07_cntrl[ctr] = 0;
        pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles);
@@ -334,16 +333,16 @@
                p->bit = signal_bit;
        }
 
-       for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) {
+       for (i = 0; i < NUM_DEBUG_BUS_WORDS; i++) {
                if (bus_word & (1 << i)) {
                        pm_regs.debug_bus_control |=
-                           (bus_type << (31 - (2 * i) + 1));
+                           (bus_type << (30 - (2 * i)));
 
                        for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) {
                                if (input_bus[j] == 0xff) {
                                        input_bus[j] = i;
                                        pm_regs.group_control |=
-                                           (i << (31 - i));
+                                           (i << (30 - (2 * j)));
 
                                        break;
                                }
@@ -450,6 +449,12 @@
        hdw_thread = 1 ^ hdw_thread;
        next_hdw_thread = hdw_thread;
 
+       pm_regs.group_control = 0;
+       pm_regs.debug_bus_control = 0;
+
+       for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
+               input_bus[i] = 0xff;
+
        /*
         * There are some per thread events.  Must do the
         * set event, for the thread that is being started
@@ -619,9 +624,6 @@
                pmc_cntrl[1][i].vcntr = i;
        }
 
-       for (i = 0; i < NUM_TRACE_BUS_WORDS; i++)
-               trace_bus[i] = 0xff;
-
        for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
                input_bus[i] = 0xff;
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/40x/Kconfig powerpc.git/arch/powerpc/platforms/40x/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/40x/Kconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/40x/Kconfig      2008-01-28 20:25:49.000000000 +0100
@@ -14,28 +14,34 @@
 #      help
 #        This option enables support for the CPCI405 board.
 
-#config EP405
-#      bool "EP405/EP405PC"
-#      depends on 40x
-#      default n
-#      select 405GP
-#      help
-#        This option enables support for the EP405/EP405PC boards.
-
-#config EP405PC
-#      bool "EP405PC Support"
-#      depends on EP405
-#      default y
-#      help
-#        This option enables support for the extra features of the EP405PC board.
+config EP405
+       bool "EP405/EP405PC"
+       depends on 40x
+       default n
+       select 405GP
+       select PCI
+       help
+         This option enables support for the EP405/EP405PC boards.
 
 config KILAUEA
        bool "Kilauea"
        depends on 40x
        default n
+       select 405EX
+       select PPC4xx_PCI_EXPRESS
        help
          This option enables support for the AMCC PPC405EX evaluation board.
 
+config MAKALU
+       bool "Makalu"
+       depends on 40x
+       default n
+       select 405EX
+       select PCI
+       select PPC4xx_PCI_EXPRESS
+       help
+         This option enables support for the AMCC PPC405EX board.
+
 #config REDWOOD_5
 #      bool "Redwood-5"
 #      depends on 40x
@@ -65,6 +71,7 @@
        depends on 40x
        default y
        select 405GP
+       select PCI
        help
          This option enables support for the IBM PPC405GP evaluation board.
 
@@ -105,6 +112,11 @@
 config 405EP
        bool
 
+config 405EX
+       bool
+       select IBM_NEW_EMAC_EMAC4
+       select IBM_NEW_EMAC_RGMII
+
 config 405GPR
        bool
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/40x/Makefile powerpc.git/arch/powerpc/platforms/40x/Makefile
--- linux-2.6.24/arch/powerpc/platforms/40x/Makefile    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/40x/Makefile     2008-01-28 20:25:49.000000000 +0100
@@ -1,3 +1,5 @@
 obj-$(CONFIG_KILAUEA)                          += kilauea.o
+obj-$(CONFIG_MAKALU)                           += makalu.o
 obj-$(CONFIG_WALNUT)                           += walnut.o
 obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)      += virtex.o
+obj-$(CONFIG_EP405)                            += ep405.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/40x/ep405.c powerpc.git/arch/powerpc/platforms/40x/ep405.c
--- linux-2.6.24/arch/powerpc/platforms/40x/ep405.c     1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/40x/ep405.c      2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,123 @@
+/*
+ * Architecture- / platform-specific boot-time initialization code for
+ * IBM PowerPC 4xx based boards. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ * <dan@net4x.com>.
+ *
+ * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 IBM Corporation
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Adapted to EP405 by Ben. Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * TODO: Wire up the PCI IRQ mux and the southbridge interrupts
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
+static struct device_node *bcsr_node;
+static void __iomem *bcsr_regs;
+
+/* BCSR registers  */
+#define BCSR_ID                        0
+#define BCSR_PCI_CTRL          1
+#define BCSR_FLASH_NV_POR_CTRL 2
+#define BCSR_FENET_UART_CTRL   3
+#define BCSR_PCI_IRQ           4
+#define BCSR_XIRQ_SELECT       5
+#define BCSR_XIRQ_ROUTING      6
+#define BCSR_XIRQ_STATUS       7
+#define BCSR_XIRQ_STATUS2      8
+#define BCSR_SW_STAT_LED_CTRL  9
+#define BCSR_GPIO_IRQ_PAR_CTRL 10
+/* there's more, can't be bothered typing them tho */
+
+
+static __initdata struct of_device_id ep405_of_bus[] = {
+       { .compatible = "ibm,plb3", },
+       { .compatible = "ibm,opb", },
+       { .compatible = "ibm,ebc", },
+       {},
+};
+
+static int __init ep405_device_probe(void)
+{
+       of_platform_bus_probe(NULL, ep405_of_bus, NULL);
+
+       return 0;
+}
+machine_device_initcall(ep405, ep405_device_probe);
+
+static void __init ep405_init_bcsr(void)
+{
+       const u8 *irq_routing;
+       int i;
+
+       /* Find the bloody thing & map it */
+       bcsr_node = of_find_compatible_node(NULL, NULL, "ep405-bcsr");
+       if (bcsr_node == NULL) {
+               printk(KERN_ERR "EP405 BCSR not found !\n");
+               return;
+       }
+       bcsr_regs = of_iomap(bcsr_node, 0);
+       if (bcsr_regs == NULL) {
+               printk(KERN_ERR "EP405 BCSR failed to map !\n");
+               return;
+       }
+
+       /* Get the irq-routing property and apply the routing to the CPLD */
+       irq_routing = of_get_property(bcsr_node, "irq-routing", NULL);
+       if (irq_routing == NULL)
+               return;
+       for (i = 0; i < 16; i++) {
+               u8 irq = irq_routing[i];
+               out_8(bcsr_regs + BCSR_XIRQ_SELECT, i);
+               out_8(bcsr_regs + BCSR_XIRQ_ROUTING, irq);
+       }
+       in_8(bcsr_regs + BCSR_XIRQ_SELECT);
+       mb();
+       out_8(bcsr_regs + BCSR_GPIO_IRQ_PAR_CTRL, 0xfe);
+}
+
+static void __init ep405_setup_arch(void)
+{
+       /* Find & init the BCSR CPLD */
+       ep405_init_bcsr();
+
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+}
+
+static int __init ep405_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (!of_flat_dt_is_compatible(root, "ep405"))
+               return 0;
+
+       return 1;
+}
+
+define_machine(ep405) {
+       .name                   = "EP405",
+       .probe                  = ep405_probe,
+       .setup_arch             = ep405_setup_arch,
+       .progress               = udbg_progress,
+       .init_IRQ               = uic_init_tree,
+       .get_irq                = uic_get_irq,
+       .calibrate_decr         = generic_calibrate_decr,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/40x/kilauea.c powerpc.git/arch/powerpc/platforms/40x/kilauea.c
--- linux-2.6.24/arch/powerpc/platforms/40x/kilauea.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/40x/kilauea.c    2008-01-28 20:25:49.000000000 +0100
@@ -19,8 +19,9 @@
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
+#include <asm/pci-bridge.h>
 
-static struct of_device_id kilauea_of_bus[] = {
+static __initdata struct of_device_id kilauea_of_bus[] = {
        { .compatible = "ibm,plb4", },
        { .compatible = "ibm,opb", },
        { .compatible = "ibm,ebc", },
@@ -29,14 +30,11 @@
 
 static int __init kilauea_device_probe(void)
 {
-       if (!machine_is(kilauea))
-               return 0;
-
        of_platform_bus_probe(NULL, kilauea_of_bus, NULL);
 
        return 0;
 }
-device_initcall(kilauea_device_probe);
+machine_device_initcall(kilauea, kilauea_device_probe);
 
 static int __init kilauea_probe(void)
 {
@@ -45,6 +43,8 @@
        if (!of_flat_dt_is_compatible(root, "amcc,kilauea"))
                return 0;
 
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
        return 1;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/40x/makalu.c powerpc.git/arch/powerpc/platforms/40x/makalu.c
--- linux-2.6.24/arch/powerpc/platforms/40x/makalu.c    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/40x/makalu.c     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,58 @@
+/*
+ * Makalu board specific routines
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Based on the Walnut code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
+static __initdata struct of_device_id makalu_of_bus[] = {
+       { .compatible = "ibm,plb4", },
+       { .compatible = "ibm,opb", },
+       { .compatible = "ibm,ebc", },
+       {},
+};
+
+static int __init makalu_device_probe(void)
+{
+       of_platform_bus_probe(NULL, makalu_of_bus, NULL);
+
+       return 0;
+}
+machine_device_initcall(makalu, makalu_device_probe);
+
+static int __init makalu_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (!of_flat_dt_is_compatible(root, "amcc,makalu"))
+               return 0;
+
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+       return 1;
+}
+
+define_machine(makalu) {
+       .name                           = "Makalu",
+       .probe                          = makalu_probe,
+       .progress                       = udbg_progress,
+       .init_IRQ                       = uic_init_tree,
+       .get_irq                        = uic_get_irq,
+       .calibrate_decr                 = generic_calibrate_decr,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/40x/virtex.c powerpc.git/arch/powerpc/platforms/40x/virtex.c
--- linux-2.6.24/arch/powerpc/platforms/40x/virtex.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/40x/virtex.c     2008-01-28 20:25:49.000000000 +0100
@@ -15,16 +15,23 @@
 #include <asm/time.h>
 #include <asm/xilinx_intc.h>
 
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+       { .compatible = "xlnx,plb-v46-1.00.a", },
+       { .compatible = "xlnx,plb-v34-1.01.a", },
+       { .compatible = "xlnx,plb-v34-1.02.a", },
+       { .compatible = "xlnx,opb-v20-1.10.c", },
+       { .compatible = "xlnx,dcr-v29-1.00.a", },
+       { .compatible = "xlnx,compound", },
+       {}
+};
+
 static int __init virtex_device_probe(void)
 {
-       if (!machine_is(virtex))
-               return 0;
-
-       of_platform_bus_probe(NULL, NULL, NULL);
+       of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
 
        return 0;
 }
-device_initcall(virtex_device_probe);
+machine_device_initcall(virtex, virtex_device_probe);
 
 static int __init virtex_probe(void)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/40x/walnut.c powerpc.git/arch/powerpc/platforms/40x/walnut.c
--- linux-2.6.24/arch/powerpc/platforms/40x/walnut.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/40x/walnut.c     2008-01-28 20:25:49.000000000 +0100
@@ -24,8 +24,9 @@
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
+#include <asm/pci-bridge.h>
 
-static struct of_device_id walnut_of_bus[] = {
+static __initdata struct of_device_id walnut_of_bus[] = {
        { .compatible = "ibm,plb3", },
        { .compatible = "ibm,opb", },
        { .compatible = "ibm,ebc", },
@@ -34,15 +35,12 @@
 
 static int __init walnut_device_probe(void)
 {
-       if (!machine_is(walnut))
-               return 0;
-
-       /* FIXME: do bus probe here */
        of_platform_bus_probe(NULL, walnut_of_bus, NULL);
+       of_instantiate_rtc();
 
        return 0;
 }
-device_initcall(walnut_device_probe);
+machine_device_initcall(walnut, walnut_device_probe);
 
 static int __init walnut_probe(void)
 {
@@ -51,6 +49,8 @@
        if (!of_flat_dt_is_compatible(root, "ibm,walnut"))
                return 0;
 
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
        return 1;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/Kconfig powerpc.git/arch/powerpc/platforms/44x/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/44x/Kconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/Kconfig      2008-01-28 20:25:49.000000000 +0100
@@ -3,6 +3,7 @@
        depends on 44x
        default n
        select 440EP
+       select PCI
        help
          This option enables support for the IBM PPC440EP evaluation board.
 
@@ -11,6 +12,8 @@
        depends on 44x
        default y
        select 440GP
+       select PCI
+       select OF_RTC
        help
          This option enables support for the IBM PPC440GP evaluation board.
 
@@ -22,6 +25,48 @@
        help
          This option enables support for the AMCC PPC440EPX evaluation board.
 
+config TAISHAN
+       bool "Taishan"
+       depends on 44x
+       default n
+       select 440GX
+       select PCI
+       help
+         This option enables support for the AMCC PPC440GX "Taishan"
+         evaluation board.
+
+config KATMAI
+       bool "Katmai"
+       depends on 44x
+       default n
+       select 440SPe
+       select PCI
+       select PPC4xx_PCI_EXPRESS
+       help
+         This option enables support for the AMCC PPC440SPe evaluation board.
+
+config RAINIER
+       bool "Rainier"
+       depends on 44x
+       default n
+       select 440GRX
+       select PCI
+       help
+         This option enables support for the AMCC PPC440GRX evaluation board.
+
+config WARP
+       bool "PIKA Warp"
+       depends on 44x
+       default n
+       select 440EP
+       help
+         This option enables support for the PIKA Warp(tm) Appliance. The Warp
+          is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP
+         stations and trunks.
+
+         See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
+         Telephony Developers" link for more information.
+
 #config LUAN
 #      bool "Luan"
 #      depends on 44x
@@ -44,6 +89,7 @@
        select PPC_FPU
        select IBM440EP_ERR42
        select IBM_NEW_EMAC_ZMII
+       select USB_ARCH_HAS_OHCI
 
 config 440EPX
        bool
@@ -52,20 +98,29 @@
        select IBM_NEW_EMAC_RGMII
        select IBM_NEW_EMAC_ZMII
 
+config 440GRX
+       bool
+       select IBM_NEW_EMAC_EMAC4
+       select IBM_NEW_EMAC_RGMII
+       select IBM_NEW_EMAC_ZMII
+
 config 440GP
        bool
        select IBM_NEW_EMAC_ZMII
 
 config 440GX
        bool
+        select IBM_NEW_EMAC_EMAC4
+       select IBM_NEW_EMAC_RGMII
+        select IBM_NEW_EMAC_ZMII #test only
+        select IBM_NEW_EMAC_TAH  #test only
 
 config 440SP
        bool
 
-config 440A
+config 440SPe
+        select IBM_NEW_EMAC_EMAC4
        bool
-       depends on 440GX || 440EPX
-       default y
 
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/Makefile powerpc.git/arch/powerpc/platforms/44x/Makefile
--- linux-2.6.24/arch/powerpc/platforms/44x/Makefile    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/Makefile     2008-01-28 20:25:49.000000000 +0100
@@ -1,4 +1,9 @@
 obj-$(CONFIG_44x)      := misc_44x.o
 obj-$(CONFIG_EBONY)    += ebony.o
-obj-$(CONFIG_BAMBOO) += bamboo.o
+obj-$(CONFIG_TAISHAN)  += taishan.o
+obj-$(CONFIG_BAMBOO)   += bamboo.o
 obj-$(CONFIG_SEQUOIA)  += sequoia.o
+obj-$(CONFIG_KATMAI)   += katmai.o
+obj-$(CONFIG_RAINIER)  += rainier.o
+obj-$(CONFIG_WARP)     += warp.o
+obj-$(CONFIG_WARP)     += warp-nand.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/bamboo.c powerpc.git/arch/powerpc/platforms/44x/bamboo.c
--- linux-2.6.24/arch/powerpc/platforms/44x/bamboo.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/bamboo.c     2008-01-28 20:25:49.000000000 +0100
@@ -21,9 +21,11 @@
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
 #include "44x.h"
 
-static struct of_device_id bamboo_of_bus[] = {
+static __initdata struct of_device_id bamboo_of_bus[] = {
        { .compatible = "ibm,plb4", },
        { .compatible = "ibm,opb", },
        { .compatible = "ibm,ebc", },
@@ -32,14 +34,11 @@
 
 static int __init bamboo_device_probe(void)
 {
-       if (!machine_is(bamboo))
-               return 0;
-
        of_platform_bus_probe(NULL, bamboo_of_bus, NULL);
 
        return 0;
 }
-device_initcall(bamboo_device_probe);
+machine_device_initcall(bamboo, bamboo_device_probe);
 
 static int __init bamboo_probe(void)
 {
@@ -48,6 +47,8 @@
        if (!of_flat_dt_is_compatible(root, "amcc,bamboo"))
                return 0;
 
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
        return 1;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/ebony.c powerpc.git/arch/powerpc/platforms/44x/ebony.c
--- linux-2.6.24/arch/powerpc/platforms/44x/ebony.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/ebony.c      2008-01-28 20:25:49.000000000 +0100
@@ -18,16 +18,18 @@
 
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/rtc.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
+#include <asm/pci-bridge.h>
 
 #include "44x.h"
 
-static struct of_device_id ebony_of_bus[] = {
+static __initdata struct of_device_id ebony_of_bus[] = {
        { .compatible = "ibm,plb4", },
        { .compatible = "ibm,opb", },
        { .compatible = "ibm,ebc", },
@@ -36,14 +38,12 @@
 
 static int __init ebony_device_probe(void)
 {
-       if (!machine_is(ebony))
-               return 0;
-
        of_platform_bus_probe(NULL, ebony_of_bus, NULL);
+       of_instantiate_rtc();
 
        return 0;
 }
-device_initcall(ebony_device_probe);
+machine_device_initcall(ebony, ebony_device_probe);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -55,6 +55,8 @@
        if (!of_flat_dt_is_compatible(root, "ibm,ebony"))
                return 0;
 
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
        return 1;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/katmai.c powerpc.git/arch/powerpc/platforms/44x/katmai.c
--- linux-2.6.24/arch/powerpc/platforms/44x/katmai.c    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/katmai.c     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,63 @@
+/*
+ * Katmai board specific routines
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2007 IBM Corp.
+ *
+ * Based on the Bamboo code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
+#include "44x.h"
+
+static __initdata struct of_device_id katmai_of_bus[] = {
+       { .compatible = "ibm,plb4", },
+       { .compatible = "ibm,opb", },
+       { .compatible = "ibm,ebc", },
+       {},
+};
+
+static int __init katmai_device_probe(void)
+{
+       of_platform_bus_probe(NULL, katmai_of_bus, NULL);
+
+       return 0;
+}
+machine_device_initcall(katmai, katmai_device_probe);
+
+static int __init katmai_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (!of_flat_dt_is_compatible(root, "amcc,katmai"))
+               return 0;
+
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+       return 1;
+}
+
+define_machine(katmai) {
+       .name                           = "Katmai",
+       .probe                          = katmai_probe,
+       .progress                       = udbg_progress,
+       .init_IRQ                       = uic_init_tree,
+       .get_irq                        = uic_get_irq,
+       .restart                        = ppc44x_reset_system,
+       .calibrate_decr                 = generic_calibrate_decr,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/rainier.c powerpc.git/arch/powerpc/platforms/44x/rainier.c
--- linux-2.6.24/arch/powerpc/platforms/44x/rainier.c   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/rainier.c    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,62 @@
+/*
+ * Rainier board specific routines
+ *
+ * Valentine Barshak <vbarshak@ru.mvista.com>
+ * Copyright 2007 MontaVista Software Inc.
+ *
+ * Based on the Bamboo code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include "44x.h"
+
+static __initdata struct of_device_id rainier_of_bus[] = {
+       { .compatible = "ibm,plb4", },
+       { .compatible = "ibm,opb", },
+       { .compatible = "ibm,ebc", },
+       {},
+};
+
+static int __init rainier_device_probe(void)
+{
+       of_platform_bus_probe(NULL, rainier_of_bus, NULL);
+
+       return 0;
+}
+machine_device_initcall(rainier, rainier_device_probe);
+
+static int __init rainier_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (!of_flat_dt_is_compatible(root, "amcc,rainier"))
+               return 0;
+
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+       return 1;
+}
+
+define_machine(rainier) {
+       .name                           = "Rainier",
+       .probe                          = rainier_probe,
+       .progress                       = udbg_progress,
+       .init_IRQ                       = uic_init_tree,
+       .get_irq                        = uic_get_irq,
+       .restart                        = ppc44x_reset_system,
+       .calibrate_decr                 = generic_calibrate_decr,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/sequoia.c powerpc.git/arch/powerpc/platforms/44x/sequoia.c
--- linux-2.6.24/arch/powerpc/platforms/44x/sequoia.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/sequoia.c    2008-01-28 20:25:49.000000000 +0100
@@ -21,9 +21,11 @@
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
 #include "44x.h"
 
-static struct of_device_id sequoia_of_bus[] = {
+static __initdata struct of_device_id sequoia_of_bus[] = {
        { .compatible = "ibm,plb4", },
        { .compatible = "ibm,opb", },
        { .compatible = "ibm,ebc", },
@@ -32,14 +34,11 @@
 
 static int __init sequoia_device_probe(void)
 {
-       if (!machine_is(sequoia))
-               return 0;
-
        of_platform_bus_probe(NULL, sequoia_of_bus, NULL);
 
        return 0;
 }
-device_initcall(sequoia_device_probe);
+machine_device_initcall(sequoia, sequoia_device_probe);
 
 static int __init sequoia_probe(void)
 {
@@ -48,6 +47,8 @@
        if (!of_flat_dt_is_compatible(root, "amcc,sequoia"))
                return 0;
 
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
        return 1;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/taishan.c powerpc.git/arch/powerpc/platforms/44x/taishan.c
--- linux-2.6.24/arch/powerpc/platforms/44x/taishan.c   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/taishan.c    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,73 @@
+/*
+ * Taishan board specific routines based off ebony.c code
+ * original copyrights below
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * Modified from ebony.c for taishan:
+ * Copyright 2007 Hugh Blemings <hugh@au.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
+#include "44x.h"
+
+static __initdata struct of_device_id taishan_of_bus[] = {
+       { .compatible = "ibm,plb4", },
+       { .compatible = "ibm,opb", },
+       { .compatible = "ibm,ebc", },
+       {},
+};
+
+static int __init taishan_device_probe(void)
+{
+       of_platform_bus_probe(NULL, taishan_of_bus, NULL);
+
+       return 0;
+}
+machine_device_initcall(taishan, taishan_device_probe);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init taishan_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (!of_flat_dt_is_compatible(root, "amcc,taishan"))
+               return 0;
+
+       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+       return 1;
+}
+
+define_machine(taishan) {
+       .name                   = "Taishan",
+       .probe                  = taishan_probe,
+       .progress               = udbg_progress,
+       .init_IRQ               = uic_init_tree,
+       .get_irq                = uic_get_irq,
+       .restart                = ppc44x_reset_system,
+       .calibrate_decr         = generic_calibrate_decr,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/warp-nand.c powerpc.git/arch/powerpc/platforms/44x/warp-nand.c
--- linux-2.6.24/arch/powerpc/platforms/44x/warp-nand.c 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/warp-nand.c  2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,105 @@
+/*
+ * PIKA Warp(tm) NAND flash specific routines
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/ndfc.h>
+
+#ifdef CONFIG_MTD_NAND_NDFC
+
+#define CS_NAND_0      1       /* use chip select 1 for NAND device 0 */
+
+#define WARP_NAND_FLASH_REG_ADDR       0xD0000000UL
+#define WARP_NAND_FLASH_REG_SIZE       0x2000
+
+static struct resource warp_ndfc = {
+       .start = WARP_NAND_FLASH_REG_ADDR,
+       .end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition nand_parts[] = {
+       {
+               .name   = "kernel",
+               .offset = 0,
+               .size   = 0x0200000
+       },
+       {
+               .name   = "root",
+               .offset = 0x0200000,
+               .size   = 0x3400000
+       },
+       {
+               .name   = "user",
+               .offset = 0x3600000,
+               .size   = 0x0A00000
+       },
+};
+
+struct ndfc_controller_settings warp_ndfc_settings = {
+       .ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1),
+       .ndfc_erpn = 0,
+};
+
+static struct ndfc_chip_settings warp_chip0_settings = {
+       .bank_settings = 0x80002222,
+};
+
+struct platform_nand_ctrl warp_nand_ctrl = {
+       .priv = &warp_ndfc_settings,
+};
+
+static struct platform_device warp_ndfc_device = {
+       .name = "ndfc-nand",
+       .id = 0,
+       .dev = {
+               .platform_data = &warp_nand_ctrl,
+       },
+       .num_resources = 1,
+       .resource = &warp_ndfc,
+};
+
+static struct nand_ecclayout nand_oob_16 = {
+       .eccbytes = 3,
+       .eccpos = { 0, 1, 2, 3, 6, 7 },
+       .oobfree = { {.offset = 8, .length = 16} }
+};
+
+static struct platform_nand_chip warp_nand_chip0 = {
+       .nr_chips = 1,
+       .chip_offset = CS_NAND_0,
+       .nr_partitions = ARRAY_SIZE(nand_parts),
+       .partitions = nand_parts,
+       .chip_delay = 50,
+       .ecclayout = &nand_oob_16,
+       .priv = &warp_chip0_settings,
+};
+
+static struct platform_device warp_nand_device = {
+       .name = "ndfc-chip",
+       .id = 0,
+       .num_resources = 1,
+       .resource = &warp_ndfc,
+       .dev = {
+               .platform_data = &warp_nand_chip0,
+               .parent = &warp_ndfc_device.dev,
+       }
+};
+
+static int warp_setup_nand_flash(void)
+{
+       platform_device_register(&warp_ndfc_device);
+       platform_device_register(&warp_nand_device);
+
+       return 0;
+}
+device_initcall(warp_setup_nand_flash);
+
+#endif
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/44x/warp.c powerpc.git/arch/powerpc/platforms/44x/warp.c
--- linux-2.6.24/arch/powerpc/platforms/44x/warp.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/44x/warp.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,153 @@
+/*
+ * PIKA Warp(tm) board specific routines
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/kthread.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+
+#include "44x.h"
+
+
+static __initdata struct of_device_id warp_of_bus[] = {
+       { .compatible = "ibm,plb4", },
+       { .compatible = "ibm,opb", },
+       { .compatible = "ibm,ebc", },
+       {},
+};
+
+static int __init warp_device_probe(void)
+{
+       of_platform_bus_probe(NULL, warp_of_bus, NULL);
+       return 0;
+}
+machine_device_initcall(warp, warp_device_probe);
+
+static int __init warp_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       return of_flat_dt_is_compatible(root, "pika,warp");
+}
+
+define_machine(warp) {
+       .name           = "Warp",
+       .probe          = warp_probe,
+       .progress       = udbg_progress,
+       .init_IRQ       = uic_init_tree,
+       .get_irq        = uic_get_irq,
+       .restart        = ppc44x_reset_system,
+       .calibrate_decr = generic_calibrate_decr,
+};
+
+
+#define LED_GREEN (0x80000000 >> 0)
+#define LED_RED   (0x80000000 >> 1)
+
+
+/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
+void warp_set_power_leds(int green, int red)
+{
+       static void __iomem *gpio_base = NULL;
+       unsigned leds;
+
+       if (gpio_base == NULL) {
+               struct device_node *np;
+
+               /* Power LEDS are on the second GPIO controller */
+               np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
+               if (np)
+                       np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
+               if (np == NULL) {
+                       printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
+                       return;
+               }
+
+               gpio_base = of_iomap(np, 0);
+               of_node_put(np);
+               if (gpio_base == NULL) {
+                       printk(KERN_ERR __FILE__ ": Unable to map gpio");
+                       return;
+               }
+       }
+
+       leds = in_be32(gpio_base);
+
+       switch (green) {
+       case 0: leds &= ~LED_GREEN; break;
+       case 1: leds |=  LED_GREEN; break;
+       }
+       switch (red) {
+       case 0: leds &= ~LED_RED; break;
+       case 1: leds |=  LED_RED; break;
+       }
+
+       out_be32(gpio_base, leds);
+}
+EXPORT_SYMBOL(warp_set_power_leds);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+static int pika_dtm_thread(void __iomem *fpga)
+{
+       extern int ad7414_get_temp(int index);
+
+       while (!kthread_should_stop()) {
+               int temp = ad7414_get_temp(0);
+
+               out_be32(fpga, temp);
+
+               set_current_state(TASK_INTERRUPTIBLE);
+               schedule_timeout(HZ);
+       }
+
+       return 0;
+}
+
+static int __init pika_dtm_start(void)
+{
+       struct task_struct *dtm_thread;
+       struct device_node *np;
+       struct resource res;
+       void __iomem *fpga;
+
+       np = of_find_compatible_node(NULL, NULL, "pika,fpga");
+       if (np == NULL)
+               return -ENOENT;
+
+       /* We do not call of_iomap here since it would map in the entire
+        * fpga space, which is over 8k.
+        */
+       if (of_address_to_resource(np, 0, &res)) {
+               of_node_put(np);
+               return -ENOENT;
+       }
+       of_node_put(np);
+
+       fpga = ioremap(res.start + 0x20, 4);
+       if (fpga == NULL)
+               return -ENOENT;
+
+       dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+       if (IS_ERR(dtm_thread)) {
+               iounmap(fpga);
+               return PTR_ERR(dtm_thread);
+       }
+
+       return 0;
+}
+device_initcall(pika_dtm_start);
+#endif
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/Kconfig powerpc.git/arch/powerpc/platforms/52xx/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/52xx/Kconfig    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/Kconfig     2008-01-28 20:25:49.000000000 +0100
@@ -19,6 +19,28 @@
 
          It is safe to say 'Y' here
 
+config PPC_MPC5200_SIMPLE
+       bool "Generic support for simple MPC5200 based boards"
+       depends on PPC_MULTIPLATFORM && PPC32
+       select PPC_MPC5200
+       select DEFAULT_UIMAGE
+       select WANT_DEVICE_TREE
+       default n
+       help
+         This option enables support for a simple MPC52xx based boards which
+         do not need a custom platform specific setup. Such boards are
+         supported assuming the following:
+
+         - GPIO pins are configured by the firmware,
+         - CDM configuration (clocking) is setup correctly by firmware,
+         - if the 'fsl,has-wdt' property is present in one of the
+           gpt nodes, then it is safe to use such gpt to reset the board,
+         - PCI is supported if enabled in the kernel configuration
+           and if there is a PCI bus node defined in the device tree.
+
+         Boards that are compatible with this generic platform support
+         are: 'tqc,tqm5200', 'promess,motionpro', 'schindler,cm5200'.
+
 config PPC_EFIKA
        bool "bPlan Efika 5k2. MPC5200B based computer"
        depends on PPC_MULTIPLATFORM && PPC32
@@ -31,8 +53,7 @@
 config PPC_LITE5200
        bool "Freescale Lite5200 Eval Board"
        depends on PPC_MULTIPLATFORM && PPC32
-       select WANT_DEVICE_TREE
        select PPC_MPC5200
+       select DEFAULT_UIMAGE
+       select WANT_DEVICE_TREE
        default n
-
-
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/Makefile powerpc.git/arch/powerpc/platforms/52xx/Makefile
--- linux-2.6.24/arch/powerpc/platforms/52xx/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/Makefile    2008-01-28 20:25:49.000000000 +0100
@@ -6,6 +6,7 @@
 obj-$(CONFIG_PCI)              += mpc52xx_pci.o
 endif
 
+obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
 obj-$(CONFIG_PPC_EFIKA)                += efika.o
 obj-$(CONFIG_PPC_LITE5200)     += lite5200.o
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/lite5200.c powerpc.git/arch/powerpc/platforms/52xx/lite5200.c
--- linux-2.6.24/arch/powerpc/platforms/52xx/lite5200.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/lite5200.c  2008-01-28 20:25:49.000000000 +0100
@@ -42,10 +42,13 @@
 static void __init
 lite5200_fix_clock_config(void)
 {
+       struct device_node *np;
        struct mpc52xx_cdm  __iomem *cdm;
 
        /* Map zones */
-       cdm = mpc52xx_find_and_map("mpc5200-cdm");
+       np = of_find_compatible_node(NULL, NULL, "mpc5200-cdm");
+       cdm = of_iomap(np, 0);
+       of_node_put(np);
        if (!cdm) {
                printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
                       __FUNCTION__);
@@ -74,10 +77,13 @@
 static void __init
 lite5200_fix_port_config(void)
 {
+       struct device_node *np;
        struct mpc52xx_gpio __iomem *gpio;
        u32 port_config;
 
-       gpio = mpc52xx_find_and_map("mpc5200-gpio");
+       np = of_find_compatible_node(NULL, NULL, "mpc5200-gpio");
+       gpio = of_iomap(np, 0);
+       of_node_put(np);
        if (!gpio) {
                printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
                       __FUNCTION__);
@@ -131,10 +137,6 @@
 
 static void __init lite5200_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-       struct device_node *np;
-#endif
-
        if (ppc_md.progress)
                ppc_md.progress("lite5200_setup_arch()", 0);
 
@@ -154,13 +156,7 @@
        lite5200_pm_init();
 #endif
 
-#ifdef CONFIG_PCI
-       np = of_find_node_by_type(NULL, "pci");
-       if (np) {
-               mpc52xx_add_bridge(np);
-               of_node_put(np);
-       }
-#endif
+       mpc52xx_setup_pci();
 }
 
 /*
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/lite5200_pm.c powerpc.git/arch/powerpc/platforms/52xx/lite5200_pm.c
--- linux-2.6.24/arch/powerpc/platforms/52xx/lite5200_pm.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/lite5200_pm.c       2008-01-28 20:25:49.000000000 +0100
@@ -42,6 +42,8 @@
 
 static int lite5200_pm_prepare(void)
 {
+       struct device_node *np;
+
        /* deep sleep? let mpc52xx code handle that */
        if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
                return mpc52xx_pm_prepare();
@@ -50,7 +52,9 @@
                return -EINVAL;
 
        /* map registers */
-       mbar = mpc52xx_find_and_map("mpc5200");
+       np = of_find_compatible_node(NULL, NULL, "mpc5200");
+       mbar = of_iomap(np, 0);
+       of_node_put(np);
        if (!mbar) {
                printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
                return -ENOSYS;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/mpc5200_simple.c powerpc.git/arch/powerpc/platforms/52xx/mpc5200_simple.c
--- linux-2.6.24/arch/powerpc/platforms/52xx/mpc5200_simple.c   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/mpc5200_simple.c    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,85 @@
+/*
+ * Support for 'mpc5200-simple-platform' compatible boards.
+ *
+ * Written by Marian Balakowicz <m8@semihalf.com>
+ * Copyright (C) 2007 Semihalf
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Description:
+ * This code implements support for a simple MPC52xx based boards which
+ * do not need a custom platform specific setup. Such boards are
+ * supported assuming the following:
+ *
+ * - GPIO pins are configured by the firmware,
+ * - CDM configuration (clocking) is setup correctly by firmware,
+ * - if the 'fsl,has-wdt' property is present in one of the
+ *   gpt nodes, then it is safe to use such gpt to reset the board,
+ * - PCI is supported if enabled in the kernel configuration
+ *   and if there is a PCI bus node defined in the device tree.
+ *
+ * Boards that are compatible with this generic platform support
+ * are listed in a 'board' table.
+ */
+
+#undef DEBUG
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/mpc52xx.h>
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc5200_simple_setup_arch(void)
+{
+       if (ppc_md.progress)
+               ppc_md.progress("mpc5200_simple_setup_arch()", 0);
+
+       /* Some mpc5200 & mpc5200b related configuration */
+       mpc5200_setup_xlb_arbiter();
+
+       /* Map wdt for mpc52xx_restart() */
+       mpc52xx_map_wdt();
+
+       mpc52xx_setup_pci();
+}
+
+/* list of the supported boards */
+static char *board[] __initdata = {
+       "promess,motionpro",
+       "schindler,cm5200",
+       "tqc,tqm5200",
+       NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5200_simple_probe(void)
+{
+       unsigned long node = of_get_flat_dt_root();
+       int i = 0;
+
+       while (board[i]) {
+               if (of_flat_dt_is_compatible(node, board[i]))
+                       break;
+               i++;
+       }
+       
+       return (board[i] != NULL);
+}
+
+define_machine(mpc5200_simple_platform) {
+       .name           = "mpc5200-simple-platform",
+       .probe          = mpc5200_simple_probe,
+       .setup_arch     = mpc5200_simple_setup_arch,
+       .init           = mpc52xx_declare_of_platform_devices,
+       .init_IRQ       = mpc52xx_init_irq,
+       .get_irq        = mpc52xx_get_irq,
+       .restart        = mpc52xx_restart,
+       .calibrate_decr = generic_calibrate_decr,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_common.c powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_common.c
--- linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_common.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_common.c    2008-01-28 20:25:49.000000000 +0100
@@ -26,45 +26,6 @@
  */
 static volatile struct mpc52xx_gpt *mpc52xx_wdt = NULL;
 
-static void __iomem *
-mpc52xx_map_node(struct device_node *ofn)
-{
-       const u32 *regaddr_p;
-       u64 regaddr64, size64;
-
-       if (!ofn)
-               return NULL;
-
-       regaddr_p = of_get_address(ofn, 0, &size64, NULL);
-       if (!regaddr_p) {
-               of_node_put(ofn);
-               return NULL;
-       }
-
-       regaddr64 = of_translate_address(ofn, regaddr_p);
-
-       of_node_put(ofn);
-
-       return ioremap((u32)regaddr64, (u32)size64);
-}
-
-void __iomem *
-mpc52xx_find_and_map(const char *compatible)
-{
-       return mpc52xx_map_node(
-               of_find_compatible_node(NULL, NULL, compatible));
-}
-
-EXPORT_SYMBOL(mpc52xx_find_and_map);
-
-void __iomem *
-mpc52xx_find_and_map_path(const char *path)
-{
-       return mpc52xx_map_node(of_find_node_by_path(path));
-}
-
-EXPORT_SYMBOL(mpc52xx_find_and_map_path);
-
 /**
  *     mpc52xx_find_ipb_freq - Find the IPB bus frequency for a device
  *     @node:  device node
@@ -101,9 +62,12 @@
 void __init
 mpc5200_setup_xlb_arbiter(void)
 {
+       struct device_node *np;
        struct mpc52xx_xlb  __iomem *xlb;
 
-       xlb = mpc52xx_find_and_map("mpc5200-xlb");
+       np = of_find_compatible_node(NULL, NULL, "mpc5200-xlb");
+       xlb = of_iomap(np, 0);
+       of_node_put(np);
        if (!xlb) {
                printk(KERN_ERR __FILE__ ": "
                        "Error mapping XLB in mpc52xx_setup_cpu().  "
@@ -124,11 +88,21 @@
        iounmap(xlb);
 }
 
+static struct of_device_id mpc52xx_bus_ids[] __initdata= {
+       { .compatible = "fsl,mpc5200-immr", },
+       { .compatible = "fsl,lpb", },
+
+       /* depreciated matches; shouldn't be used in new device trees */
+       { .type = "builtin", .compatible = "mpc5200", }, /* efika */
+       { .type = "soc", .compatible = "mpc5200", }, /* lite5200 */
+       {},
+};
+
 void __init
 mpc52xx_declare_of_platform_devices(void)
 {
        /* Find every child of the SOC node and add it to of_platform */
-       if (of_platform_bus_probe(NULL, NULL, NULL))
+       if (of_platform_bus_probe(NULL, mpc52xx_bus_ids, NULL))
                printk(KERN_ERR __FILE__ ": "
                        "Error while probing of_platform bus\n");
 }
@@ -146,16 +120,19 @@
        for_each_compatible_node(np, NULL, "fsl,mpc5200-gpt") {
                has_wdt = of_get_property(np, "fsl,has-wdt", NULL);
                if (has_wdt) {
-                       mpc52xx_wdt = mpc52xx_map_node(np);
+                       mpc52xx_wdt = of_iomap(np, 0);
+                       of_node_put(np);
                        return;
                }
        }
        for_each_compatible_node(np, NULL, "mpc5200-gpt") {
                has_wdt = of_get_property(np, "has-wdt", NULL);
                if (has_wdt) {
-                       mpc52xx_wdt = mpc52xx_map_node(np);
+                       mpc52xx_wdt = of_iomap(np, 0);
+                       of_node_put(np);
                        return;
                }
+
        }
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_pci.c powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_pci.c
--- linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_pci.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_pci.c       2008-01-28 20:25:49.000000000 +0100
@@ -363,7 +363,7 @@
 
        pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name);
 
-       pci_assign_all_buses = 1;
+       ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
 
        if (of_address_to_resource(node, 0, &rsrc) != 0) {
                printk(KERN_ERR "Can't get %s resources\n", node->full_name);
@@ -406,3 +406,17 @@
 
        return 0;
 }
+
+void __init mpc52xx_setup_pci(void)
+{
+       struct device_node *pci;
+
+       pci = of_find_compatible_node(NULL, NULL, "fsl,mpc5200-pci");
+       if (!pci)
+               pci = of_find_compatible_node(NULL, NULL, "mpc5200-pci");
+       if (!pci)
+               return;
+
+       mpc52xx_add_bridge(pci);
+       of_node_put(pci);
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_pic.c powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_pic.c
--- linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_pic.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_pic.c       2008-01-28 20:25:49.000000000 +0100
@@ -364,16 +364,18 @@
 {
        u32 intr_ctrl;
        struct device_node *picnode;
+       struct device_node *np;
 
        /* Remap the necessary zones */
        picnode = of_find_compatible_node(NULL, NULL, "mpc5200-pic");
-
-       intr = mpc52xx_find_and_map("mpc5200-pic");
+       intr = of_iomap(picnode, 0);
        if (!intr)
                panic(__FILE__  ": find_and_map failed on 'mpc5200-pic'. "
                                "Check node !");
 
-       sdma = mpc52xx_find_and_map("mpc5200-bestcomm");
+       np = of_find_compatible_node(NULL, NULL, "mpc5200-bestcomm");
+       sdma = of_iomap(np, 0);
+       of_node_put(np);
        if (!sdma)
                panic(__FILE__  ": find_and_map failed on 'mpc5200-bestcomm'. "
                                "Check node !");
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_pm.c powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_pm.c
--- linux-2.6.24/arch/powerpc/platforms/52xx/mpc52xx_pm.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/52xx/mpc52xx_pm.c        2008-01-28 20:25:49.000000000 +0100
@@ -59,10 +59,14 @@
 
 int mpc52xx_pm_prepare(void)
 {
+       struct device_node *np;
+
        /* map the whole register space */
-       mbar = mpc52xx_find_and_map("mpc5200");
+       np = of_find_compatible_node(NULL, NULL, "mpc5200");
+       mbar = of_iomap(np, 0);
+       of_node_put(np);
        if (!mbar) {
-               printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
+               pr_err("mpc52xx_pm_prepare(): could not map registers\n");
                return -ENOSYS;
        }
        /* these offsets are from mpc5200 users manual */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/82xx/Kconfig powerpc.git/arch/powerpc/platforms/82xx/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/82xx/Kconfig    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/82xx/Kconfig     2008-01-28 20:25:49.000000000 +0100
@@ -26,6 +26,19 @@
        help
          This option enables support for the PQ2FADS board
 
+config EP8248E
+       bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)"
+       select 8272
+       select 8260
+       select FSL_SOC
+       select PPC_CPM_NEW_BINDING
+       select MDIO_BITBANG
+       help
+         This enables support for the Embedded Planet EP8248E board.
+
+         This board is also resold by Freescale as the QUICCStart
+         MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
+
 endchoice
 
 config PQ2ADS
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/82xx/Makefile powerpc.git/arch/powerpc/platforms/82xx/Makefile
--- linux-2.6.24/arch/powerpc/platforms/82xx/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/82xx/Makefile    2008-01-28 20:25:49.000000000 +0100
@@ -5,3 +5,4 @@
 obj-$(CONFIG_CPM2) += pq2.o
 obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
 obj-$(CONFIG_PQ2FADS) += pq2fads.o
+obj-$(CONFIG_EP8248E) += ep8248e.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/82xx/ep8248e.c powerpc.git/arch/powerpc/platforms/82xx/ep8248e.c
--- linux-2.6.24/arch/powerpc/platforms/82xx/ep8248e.c  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/82xx/ep8248e.c   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,324 @@
+/*
+ * Embedded Planet EP8248E support
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/mdio-bitbang.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/mpc8260.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2.h"
+
+static u8 __iomem *ep8248e_bcsr;
+static struct device_node *ep8248e_bcsr_node;
+
+#define BCSR7_SCC2_ENABLE 0x10
+
+#define BCSR8_PHY1_ENABLE 0x80
+#define BCSR8_PHY1_POWER  0x40
+#define BCSR8_PHY2_ENABLE 0x20
+#define BCSR8_PHY2_POWER  0x10
+#define BCSR8_MDIO_READ   0x04
+#define BCSR8_MDIO_CLOCK  0x02
+#define BCSR8_MDIO_DATA   0x01
+
+#define BCSR9_USB_ENABLE  0x80
+#define BCSR9_USB_POWER   0x40
+#define BCSR9_USB_HOST    0x20
+#define BCSR9_USB_FULL_SPEED_TARGET 0x10
+
+static void __init ep8248e_pic_init(void)
+{
+       struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
+       if (!np) {
+               printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+               return;
+       }
+
+       cpm2_pic_init(np);
+       of_node_put(np);
+}
+
+static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
+{
+       if (level)
+               setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
+       else
+               clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
+
+       /* Read back to flush the write. */
+       in_8(&ep8248e_bcsr[8]);
+}
+
+static void ep8248e_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output)
+{
+       if (output)
+               clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
+       else
+               setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
+
+       /* Read back to flush the write. */
+       in_8(&ep8248e_bcsr[8]);
+}
+
+static void ep8248e_set_mdio_data(struct mdiobb_ctrl *ctrl, int data)
+{
+       if (data)
+               setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
+       else
+               clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
+
+       /* Read back to flush the write. */
+       in_8(&ep8248e_bcsr[8]);
+}
+
+static int ep8248e_get_mdio_data(struct mdiobb_ctrl *ctrl)
+{
+       return in_8(&ep8248e_bcsr[8]) & BCSR8_MDIO_DATA;
+}
+
+static const struct mdiobb_ops ep8248e_mdio_ops = {
+       .set_mdc = ep8248e_set_mdc,
+       .set_mdio_dir = ep8248e_set_mdio_dir,
+       .set_mdio_data = ep8248e_set_mdio_data,
+       .get_mdio_data = ep8248e_get_mdio_data,
+       .owner = THIS_MODULE,
+};
+
+static struct mdiobb_ctrl ep8248e_mdio_ctrl = {
+       .ops = &ep8248e_mdio_ops,
+};
+
+static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
+                                        const struct of_device_id *match)
+{
+       struct mii_bus *bus;
+       struct resource res;
+       struct device_node *node;
+       int ret, i;
+
+       node = of_get_parent(ofdev->node);
+       of_node_put(node);
+       if (node != ep8248e_bcsr_node)
+               return -ENODEV;
+
+       ret = of_address_to_resource(ofdev->node, 0, &res);
+       if (ret)
+               return ret;
+
+       bus = alloc_mdio_bitbang(&ep8248e_mdio_ctrl);
+       if (!bus)
+               return -ENOMEM;
+
+       bus->phy_mask = 0;
+       bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+
+       for (i = 0; i < PHY_MAX_ADDR; i++)
+               bus->irq[i] = -1;
+
+       bus->name = "ep8248e-mdio-bitbang";
+       bus->dev = &ofdev->dev;
+       bus->id = res.start;
+
+       return mdiobus_register(bus);
+}
+
+static int ep8248e_mdio_remove(struct of_device *ofdev)
+{
+       BUG();
+       return 0;
+}
+
+static const struct of_device_id ep8248e_mdio_match[] = {
+       {
+               .compatible = "fsl,ep8248e-mdio-bitbang",
+       },
+       {},
+};
+
+static struct of_platform_driver ep8248e_mdio_driver = {
+       .driver = {
+               .name = "ep8248e-mdio-bitbang",
+       },
+       .match_table = ep8248e_mdio_match,
+       .probe = ep8248e_mdio_probe,
+       .remove = ep8248e_mdio_remove,
+};
+
+struct cpm_pin {
+       int port, pin, flags;
+};
+
+static __initdata struct cpm_pin ep8248e_pins[] = {
+       /* SMC1 */
+       {2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+       /* SCC1 */
+       {2, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+       /* FCC1 */
+       {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+       {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+       {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+       {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+       {2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+       /* FCC2 */
+       {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+       /* I2C */
+       {4, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+       {4, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+       /* USB */
+       {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(ep8248e_pins); i++) {
+               const struct cpm_pin *pin = &ep8248e_pins[i];
+               cpm2_set_pin(pin->port, pin->pin, pin->flags);
+       }
+
+       cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
+       cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+       cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); /* USB */
+       cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+       cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+}
+
+static void __init ep8248e_setup_arch(void)
+{
+       if (ppc_md.progress)
+               ppc_md.progress("ep8248e_setup_arch()", 0);
+
+       cpm2_reset();
+
+       /* When this is set, snooping CPM DMA from RAM causes
+        * machine checks.  See erratum SIU18.
+        */
+       clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
+
+       ep8248e_bcsr_node =
+               of_find_compatible_node(NULL, NULL, "fsl,ep8248e-bcsr");
+       if (!ep8248e_bcsr_node) {
+               printk(KERN_ERR "No bcsr in device tree\n");
+               return;
+       }
+
+       ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0);
+       if (!ep8248e_bcsr) {
+               printk(KERN_ERR "Cannot map BCSR registers\n");
+               of_node_put(ep8248e_bcsr_node);
+               ep8248e_bcsr_node = NULL;
+               return;
+       }
+
+       setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE);
+       setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
+                                  BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
+
+       init_ioports();
+
+       if (ppc_md.progress)
+               ppc_md.progress("ep8248e_setup_arch(), finish", 0);
+}
+
+static  __initdata struct of_device_id of_bus_ids[] = {
+       { .compatible = "simple-bus", },
+       { .compatible = "fsl,ep8248e-bcsr", },
+       {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
+       of_register_platform_driver(&ep8248e_mdio_driver);
+
+       return 0;
+}
+machine_device_initcall(ep8248e, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ep8248e_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+       return of_flat_dt_is_compatible(root, "fsl,ep8248e");
+}
+
+define_machine(ep8248e)
+{
+       .name = "Embedded Planet EP8248E",
+       .probe = ep8248e_probe,
+       .setup_arch = ep8248e_setup_arch,
+       .init_IRQ = ep8248e_pic_init,
+       .get_irq = cpm2_get_irq,
+       .calibrate_decr = generic_calibrate_decr,
+       .restart = pq2_restart,
+       .progress = udbg_progress,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/82xx/pq2.c powerpc.git/arch/powerpc/platforms/82xx/pq2.c
--- linux-2.6.24/arch/powerpc/platforms/82xx/pq2.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/82xx/pq2.c       2008-01-28 20:25:49.000000000 +0100
@@ -53,13 +53,13 @@
        if (of_address_to_resource(np, 0, &r) || r.end - r.start < 0x10b)
                goto err;
 
-       pci_assign_all_buses = 1;
+       ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
 
        hose = pcibios_alloc_controller(np);
        if (!hose)
                return;
 
-       hose->arch_data = np;
+       hose->dn = np;
 
        setup_indirect_pci(hose, r.start + 0x100, r.start + 0x104, 0);
        pci_process_bridge_OF_ranges(hose, np, 1);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/82xx/pq2fads.c powerpc.git/arch/powerpc/platforms/82xx/pq2fads.c
--- linux-2.6.24/arch/powerpc/platforms/82xx/pq2fads.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/82xx/pq2fads.c   2008-01-28 20:25:49.000000000 +0100
@@ -15,12 +15,12 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
 
 #include <asm/io.h>
 #include <asm/cpm2.h>
 #include <asm/udbg.h>
 #include <asm/machdep.h>
-#include <asm/of_platform.h>
 #include <asm/time.h>
 
 #include <sysdev/fsl_soc.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/Kconfig powerpc.git/arch/powerpc/platforms/83xx/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/83xx/Kconfig    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/Kconfig     2008-01-28 20:25:49.000000000 +0100
@@ -50,6 +50,11 @@
        help
          This option enables support for the MPC836x MDS Processor Board.
 
+config MPC837x_MDS
+       bool "Freescale MPC837x MDS"
+       select DEFAULT_UIMAGE
+       help
+         This option enables support for the MPC837x MDS Processor Board.
 endchoice
 
 config PPC_MPC831x
@@ -75,3 +80,9 @@
        select PPC_UDBG_16550
        select PPC_INDIRECT_PCI
        default y if MPC836x_MDS
+
+config PPC_MPC837x
+       bool
+       select PPC_UDBG_16550
+       select PPC_INDIRECT_PCI
+       default y if MPC837x_MDS
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/Makefile powerpc.git/arch/powerpc/platforms/83xx/Makefile
--- linux-2.6.24/arch/powerpc/platforms/83xx/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/Makefile    2008-01-28 20:25:49.000000000 +0100
@@ -9,3 +9,4 @@
 obj-$(CONFIG_MPC834x_ITX)      += mpc834x_itx.o
 obj-$(CONFIG_MPC836x_MDS)      += mpc836x_mds.o
 obj-$(CONFIG_MPC832x_MDS)      += mpc832x_mds.o
+obj-$(CONFIG_MPC837x_MDS)      += mpc837x_mds.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc8313_rdb.c powerpc.git/arch/powerpc/platforms/83xx/mpc8313_rdb.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc8313_rdb.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc8313_rdb.c       2008-01-28 20:25:49.000000000 +0100
@@ -14,6 +14,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/of_platform.h>
 
 #include <asm/time.h>
 #include <asm/ipic.h>
@@ -70,11 +71,23 @@
  */
 static int __init mpc8313_rdb_probe(void)
 {
-        unsigned long root = of_get_flat_dt_root();
+       unsigned long root = of_get_flat_dt_root();
 
-        return of_flat_dt_is_compatible(root, "MPC8313ERDB");
+       return of_flat_dt_is_compatible(root, "MPC8313ERDB");
 }
 
+static struct of_device_id __initdata of_bus_ids[] = {
+       { .compatible = "simple-bus" },
+       {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
+       return 0;
+}
+machine_device_initcall(mpc8313_rdb, declare_of_platform_devices);
+
 define_machine(mpc8313_rdb) {
        .name                   = "MPC8313 RDB",
        .probe                  = mpc8313_rdb_probe,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc832x_mds.c powerpc.git/arch/powerpc/platforms/83xx/mpc832x_mds.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc832x_mds.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc832x_mds.c       2008-01-28 20:25:49.000000000 +0100
@@ -23,9 +23,9 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
 
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <asm/time.h>
@@ -110,15 +110,12 @@
 
 static int __init mpc832x_declare_of_platform_devices(void)
 {
-       if (!machine_is(mpc832x_mds))
-               return 0;
-
        /* Publish the QE devices */
        of_platform_bus_probe(NULL, mpc832x_ids, NULL);
 
        return 0;
 }
-device_initcall(mpc832x_declare_of_platform_devices);
+machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
 
 static void __init mpc832x_sys_init_IRQ(void)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc832x_rdb.c powerpc.git/arch/powerpc/platforms/83xx/mpc832x_rdb.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc832x_rdb.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc832x_rdb.c       2008-01-28 20:25:49.000000000 +0100
@@ -19,8 +19,8 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/mmc_spi.h>
 #include <linux/mmc/host.h>
+#include <linux/of_platform.h>
 
-#include <asm/of_platform.h>
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
@@ -63,9 +63,6 @@
 
 static int __init mpc832x_spi_init(void)
 {
-       if (!machine_is(mpc832x_rdb))
-               return 0;
-
        par_io_config_pin(3,  0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
        par_io_config_pin(3,  1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
        par_io_config_pin(3,  2, 3, 0, 1, 0); /* SPI1 CLK,  I/O */
@@ -80,7 +77,7 @@
                            mpc83xx_spi_deactivate_cs);
 }
 
-device_initcall(mpc832x_spi_init);
+machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
 
 /* ************************************************************************
  *
@@ -123,15 +120,12 @@
 
 static int __init mpc832x_declare_of_platform_devices(void)
 {
-       if (!machine_is(mpc832x_rdb))
-               return 0;
-
        /* Publish the QE devices */
        of_platform_bus_probe(NULL, mpc832x_ids, NULL);
 
        return 0;
 }
-device_initcall(mpc832x_declare_of_platform_devices);
+machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
 
 void __init mpc832x_rdb_init_IRQ(void)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc834x_itx.c powerpc.git/arch/powerpc/platforms/83xx/mpc834x_itx.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc834x_itx.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc834x_itx.c       2008-01-28 20:25:49.000000000 +0100
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -37,6 +38,17 @@
 
 #include "mpc83xx.h"
 
+static struct of_device_id __initdata mpc834x_itx_ids[] = {
+       { .compatible = "fsl,pq2pro-localbus", },
+       {},
+};
+
+static int __init mpc834x_itx_declare_of_platform_devices(void)
+{
+       return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
+}
+machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
+
 /* ************************************************************************
  *
  * Setup the architecture
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc834x_mds.c powerpc.git/arch/powerpc/platforms/83xx/mpc834x_mds.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc834x_mds.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc834x_mds.c       2008-01-28 20:25:49.000000000 +0100
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -106,14 +107,27 @@
        ipic_set_default_priority();
 }
 
+static struct of_device_id mpc834x_ids[] = {
+       { .type = "soc", },
+       { .compatible = "soc", },
+       {},
+};
+
+static int __init mpc834x_declare_of_platform_devices(void)
+{
+       of_platform_bus_probe(NULL, mpc834x_ids, NULL);
+       return 0;
+}
+machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
+
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
 static int __init mpc834x_mds_probe(void)
 {
-        unsigned long root = of_get_flat_dt_root();
+       unsigned long root = of_get_flat_dt_root();
 
-        return of_flat_dt_is_compatible(root, "MPC834xMDS");
+       return of_flat_dt_is_compatible(root, "MPC834xMDS");
 }
 
 define_machine(mpc834x_mds) {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc836x_mds.c powerpc.git/arch/powerpc/platforms/83xx/mpc836x_mds.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc836x_mds.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc836x_mds.c       2008-01-28 20:25:49.000000000 +0100
@@ -29,9 +29,9 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
 
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <asm/time.h>
@@ -141,15 +141,12 @@
 
 static int __init mpc836x_declare_of_platform_devices(void)
 {
-       if (!machine_is(mpc836x_mds))
-               return 0;
-
        /* Publish the QE devices */
        of_platform_bus_probe(NULL, mpc836x_ids, NULL);
 
        return 0;
 }
-device_initcall(mpc836x_declare_of_platform_devices);
+machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
 
 static void __init mpc836x_mds_init_IRQ(void)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc837x_mds.c powerpc.git/arch/powerpc/platforms/83xx/mpc837x_mds.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc837x_mds.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc837x_mds.c       2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,147 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc837x_mds.c
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * MPC837x MDS board specific routines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include "mpc83xx.h"
+
+#define BCSR12_USB_SER_MASK    0x8a
+#define BCSR12_USB_SER_PIN     0x80
+#define BCSR12_USB_SER_DEVICE  0x02
+extern int mpc837x_usb_cfg(void);
+
+static int mpc837xmds_usb_cfg(void)
+{
+       struct device_node *np;
+       const void *phy_type, *mode;
+       void __iomem *bcsr_regs = NULL;
+       u8 bcsr12;
+       int ret;
+
+       ret = mpc837x_usb_cfg();
+       if (ret)
+               return ret;
+       /* Map BCSR area */
+       np = of_find_node_by_name(NULL, "bcsr");
+       if (np) {
+               struct resource res;
+
+               of_address_to_resource(np, 0, &res);
+               bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+               of_node_put(np);
+       }
+       if (!bcsr_regs)
+               return -1;
+
+       np = of_find_node_by_name(NULL, "usb");
+       if (!np)
+               return -ENODEV;
+       phy_type = of_get_property(np, "phy_type", NULL);
+       if (phy_type && !strcmp(phy_type, "ulpi")) {
+               clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
+       } else if (phy_type && !strcmp(phy_type, "serial")) {
+               mode = of_get_property(np, "dr_mode", NULL);
+               bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
+               bcsr12 |= BCSR12_USB_SER_PIN;
+               if (mode && !strcmp(mode, "peripheral"))
+                       bcsr12 |= BCSR12_USB_SER_DEVICE;
+               out_8(bcsr_regs + 12, bcsr12);
+       } else {
+               printk(KERN_ERR "USB DR: unsupported PHY\n");
+       }
+
+       of_node_put(np);
+       iounmap(bcsr_regs);
+       return 0;
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc837x_mds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+       struct device_node *np;
+#endif
+
+       if (ppc_md.progress)
+               ppc_md.progress("mpc837x_mds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+       for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+               mpc83xx_add_bridge(np);
+#endif
+       mpc837xmds_usb_cfg();
+}
+
+static struct of_device_id mpc837x_ids[] = {
+       { .type = "soc", },
+       { .compatible = "soc", },
+       {},
+};
+
+static int __init mpc837x_declare_of_platform_devices(void)
+{
+       /* Publish of_device */
+       of_platform_bus_probe(NULL, mpc837x_ids, NULL);
+
+       return 0;
+}
+machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
+
+static void __init mpc837x_mds_init_IRQ(void)
+{
+       struct device_node *np;
+
+       np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+       if (!np)
+               return;
+
+       ipic_init(np, 0);
+
+       /* Initialize the default interrupt mapping priorities,
+        * in case the boot rom changed something on us.
+        */
+       ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc837x_mds_probe(void)
+{
+        unsigned long root = of_get_flat_dt_root();
+
+        return of_flat_dt_is_compatible(root, "fsl,mpc837xmds");
+}
+
+define_machine(mpc837x_mds) {
+       .name                   = "MPC837x MDS",
+       .probe                  = mpc837x_mds_probe,
+       .setup_arch             = mpc837x_mds_setup_arch,
+       .init_IRQ               = mpc837x_mds_init_IRQ,
+       .get_irq                = ipic_get_irq,
+       .restart                = mpc83xx_restart,
+       .time_init              = mpc83xx_time_init,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = udbg_progress,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/mpc83xx.h powerpc.git/arch/powerpc/platforms/83xx/mpc83xx.h
--- linux-2.6.24/arch/powerpc/platforms/83xx/mpc83xx.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/mpc83xx.h   2008-01-28 20:25:49.000000000 +0100
@@ -14,6 +14,7 @@
 #define MPC83XX_SCCR_USB_DRCM_11   0x00300000
 #define MPC83XX_SCCR_USB_DRCM_01   0x00100000
 #define MPC83XX_SCCR_USB_DRCM_10   0x00200000
+#define MPC837X_SCCR_USB_DRCM_11   0x00c00000
 
 /* system i/o configuration register low */
 #define MPC83XX_SICRL_OFFS         0x114
@@ -22,6 +23,8 @@
 #define MPC834X_SICRL_USB1         0x20000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
+#define MPC837X_SICRL_USB_MASK     0xf0000000
+#define MPC837X_SICRL_USB_ULPI     0x50000000
 
 /* system i/o configuration register high */
 #define MPC83XX_SICRH_OFFS         0x118
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/pci.c powerpc.git/arch/powerpc/platforms/83xx/pci.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/pci.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/pci.c       2008-01-28 20:25:49.000000000 +0100
@@ -54,7 +54,7 @@
                       " bus 0\n", dev->full_name);
        }
 
-       pci_assign_all_buses = 1;
+       ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
        hose = pcibios_alloc_controller(dev);
        if (!hose)
                return -ENOMEM;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/83xx/usb.c powerpc.git/arch/powerpc/platforms/83xx/usb.c
--- linux-2.6.24/arch/powerpc/platforms/83xx/usb.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/83xx/usb.c       2008-01-28 20:25:49.000000000 +0100
@@ -41,7 +41,7 @@
        sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
        sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
 
-       np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
+       np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
        if (np) {
                sccr |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
 
@@ -67,7 +67,7 @@
                port0_is_dr = 1;
                of_node_put(np);
        }
-       np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph");
+       np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
        if (np) {
                sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
 
@@ -111,7 +111,7 @@
        const void *dr_mode;
 #endif
 
-       np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
+       np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
        if (!np)
                return -ENODEV;
        prop = of_get_property(np, "phy_type", NULL);
@@ -179,3 +179,43 @@
        return ret;
 }
 #endif /* CONFIG_PPC_MPC831x */
+
+#ifdef CONFIG_PPC_MPC837x
+int mpc837x_usb_cfg(void)
+{
+       void __iomem *immap;
+       struct device_node *np = NULL;
+       const void *prop;
+       int ret = 0;
+
+       np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+       if (!np)
+               return -ENODEV;
+       prop = of_get_property(np, "phy_type", NULL);
+
+       if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
+               printk(KERN_WARNING "837x USB PHY type not supported\n");
+               of_node_put(np);
+               return -EINVAL;
+       }
+
+       /* Map IMMR space for pin and clock settings */
+       immap = ioremap(get_immrbase(), 0x1000);
+       if (!immap) {
+               of_node_put(np);
+               return -ENOMEM;
+       }
+
+       /* Configure clock */
+       clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
+                       MPC837X_SCCR_USB_DRCM_11);
+
+       /* Configure pin mux for ULPI/serial */
+       clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
+                       MPC837X_SICRL_USB_ULPI);
+
+       iounmap(immap);
+       of_node_put(np);
+       return ret;
+}
+#endif /* CONFIG_PPC_MPC837x */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_ads.c powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_ads.c
--- linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_ads.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_ads.c       2008-01-28 20:25:49.000000000 +0100
@@ -52,9 +52,9 @@
 {
        int cascade_irq;
 
-       while ((cascade_irq = cpm2_get_irq()) >= 0) {
+       while ((cascade_irq = cpm2_get_irq()) >= 0)
                generic_handle_irq(cascade_irq);
-       }
+
        desc->chip->eoi(irq);
 }
 
@@ -70,13 +70,12 @@
 #endif
 
        np = of_find_node_by_type(np, "open-pic");
-
-       if (np == NULL) {
+       if (!np) {
                printk(KERN_ERR "Could not find open-pic node\n");
                return;
        }
 
-       if(of_address_to_resource(np, 0, &r)) {
+       if (of_address_to_resource(np, 0, &r)) {
                printk(KERN_ERR "Could not map mpic register space\n");
                of_node_put(np);
                return;
@@ -100,6 +99,7 @@
        irq = irq_of_parse_and_map(np, 0);
 
        cpm2_pic_init(np);
+       of_node_put(np);
        set_irq_chained_handler(irq, cpm2_cascade);
 #endif
 }
@@ -112,7 +112,7 @@
        int port, pin, flags;
 };
 
-static struct cpm_pin mpc8560_ads_pins[] = {
+static const struct cpm_pin mpc8560_ads_pins[] = {
        /* SCC1 */
        {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
        {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
@@ -233,13 +233,11 @@
 
 static int __init declare_of_platform_devices(void)
 {
-       if (!machine_is(mpc85xx_ads))
-               return 0;
-
        of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
        return 0;
 }
-device_initcall(declare_of_platform_devices);
+machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_cds.c powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_cds.c
--- linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_cds.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_cds.c       2008-01-28 20:25:49.000000000 +0100
@@ -222,9 +222,6 @@
        struct device_node *cascade_node = NULL;
        int cascade_irq;
 
-       if (!machine_is(mpc85xx_cds))
-               return 0;
-
        /* Initialize the i8259 controller */
        for_each_node_by_type(np, "interrupt-controller")
                if (of_device_is_compatible(np, "chrp,iic")) {
@@ -262,8 +259,7 @@
 
        return 0;
 }
-
-device_initcall(mpc85xx_cds_8259_attach);
+machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
 
 #endif /* CONFIG_PPC_I8259 */
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_ds.c powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_ds.c
--- linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_ds.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_ds.c        2008-01-28 20:25:49.000000000 +0100
@@ -123,7 +123,7 @@
        struct device_node* node;
        struct resource rsrc;
 
-       node = (struct device_node *)hose->arch_data;
+       node = hose->dn;
        of_address_to_resource(node, 0, &rsrc);
 
        if ((rsrc.start & 0xfffff) == primary_phb_addr) {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_mds.c powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_mds.c
--- linux-2.6.24/arch/powerpc/platforms/85xx/mpc85xx_mds.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/85xx/mpc85xx_mds.c       2008-01-28 20:25:49.000000000 +0100
@@ -30,9 +30,9 @@
 #include <linux/initrd.h>
 #include <linux/module.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
 
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <asm/time.h>
@@ -144,15 +144,12 @@
 
 static int __init mpc85xx_publish_devices(void)
 {
-       if (!machine_is(mpc85xx_mds))
-               return 0;
-
        /* Publish the QE devices */
-       of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
+       of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
 
        return 0;
 }
-device_initcall(mpc85xx_publish_devices);
+machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/86xx/mpc8610_hpcd.c powerpc.git/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
--- linux-2.6.24/arch/powerpc/platforms/86xx/mpc8610_hpcd.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/86xx/mpc8610_hpcd.c      2008-01-28 20:25:49.000000000 +0100
@@ -34,9 +34,24 @@
 
 #include <asm/mpic.h>
 
+#include <linux/of_platform.h>
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 
+static struct of_device_id __initdata mpc8610_ids[] = {
+       { .compatible = "fsl,mpc8610-immr", },
+       {}
+};
+
+static int __init mpc8610_declare_of_platform_devices(void)
+{
+       /* Without this call, the SSI device driver won't get probed. */
+       of_platform_bus_probe(NULL, mpc8610_ids, NULL);
+
+       return 0;
+}
+machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
+
 void __init
 mpc86xx_hpcd_init_irq(void)
 {
@@ -124,7 +139,7 @@
 static void __devinit final_uli5288(struct pci_dev *dev)
 {
        struct pci_controller *hose = pci_bus_to_host(dev->bus);
-       struct device_node *hosenode = hose ? hose->arch_data : NULL;
+       struct device_node *hosenode = hose ? hose->dn : NULL;
        struct of_irq oirq;
        int virq, pin = 2;
        u32 laddr[3];
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c powerpc.git/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
--- linux-2.6.24/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c      2008-01-28 20:25:49.000000000 +0100
@@ -18,6 +18,7 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -116,7 +117,7 @@
        struct device_node* node;       
        struct resource rsrc;
 
-       node = (struct device_node *)hose->arch_data;
+       node = hose->dn;
        of_address_to_resource(node, 0, &rsrc);
 
        if ((rsrc.start & 0xfffff) == 0x8000) {
@@ -212,6 +213,19 @@
        return 0;
 }
 
+static __initdata struct of_device_id of_bus_ids[] = {
+       { .compatible = "simple-bus", },
+       {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+       return 0;
+}
+machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
+
 define_machine(mpc86xx_hpcn) {
        .name                   = "MPC86xx HPCN",
        .probe                  = mpc86xx_hpcn_probe,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/Kconfig powerpc.git/arch/powerpc/platforms/8xx/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/8xx/Kconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/Kconfig      2008-01-28 20:25:49.000000000 +0100
@@ -18,6 +18,7 @@
 config MPC86XADS
        bool "MPC86XADS"
        select CPM1
+       select PPC_CPM_NEW_BINDING
        help
          MPC86x Application Development System by Freescale Semiconductor.
          The MPC86xADS is meant to serve as a platform for s/w and h/w
@@ -43,6 +44,15 @@
          This board is also resold by Freescale as the QUICCStart
          MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
 
+config PPC_ADDER875
+       bool "Analogue & Micro Adder 875"
+       select CPM1
+       select PPC_CPM_NEW_BINDING
+       select REDBOOT
+       help
+         This enables support for the Analogue & Micro Adder 875
+         board.
+
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/Makefile powerpc.git/arch/powerpc/platforms/8xx/Makefile
--- linux-2.6.24/arch/powerpc/platforms/8xx/Makefile    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/Makefile     2008-01-28 20:25:49.000000000 +0100
@@ -5,3 +5,4 @@
 obj-$(CONFIG_MPC885ADS)   += mpc885ads_setup.o
 obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
 obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
+obj-$(CONFIG_PPC_ADDER875) += adder875.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/adder875.c powerpc.git/arch/powerpc/platforms/8xx/adder875.c
--- linux-2.6.24/arch/powerpc/platforms/8xx/adder875.c  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/adder875.c   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,118 @@
+/* Analogue & Micro Adder MPC875 board support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/fs_enet_pd.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/commproc.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include <sysdev/commproc.h>
+
+struct cpm_pin {
+       int port, pin, flags;
+};
+
+static __initdata struct cpm_pin adder875_pins[] = {
+       /* SMC1 */
+       {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+       {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+       /* MII1 */
+       {CPM_PORTA, 0, CPM_PIN_INPUT},
+       {CPM_PORTA, 1, CPM_PIN_INPUT},
+       {CPM_PORTA, 2, CPM_PIN_INPUT},
+       {CPM_PORTA, 3, CPM_PIN_INPUT},
+       {CPM_PORTA, 4, CPM_PIN_OUTPUT},
+       {CPM_PORTA, 10, CPM_PIN_OUTPUT},
+       {CPM_PORTA, 11, CPM_PIN_OUTPUT},
+       {CPM_PORTB, 19, CPM_PIN_INPUT},
+       {CPM_PORTB, 31, CPM_PIN_INPUT},
+       {CPM_PORTC, 12, CPM_PIN_INPUT},
+       {CPM_PORTC, 13, CPM_PIN_INPUT},
+       {CPM_PORTE, 30, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 31, CPM_PIN_OUTPUT},
+
+       /* MII2 */
+       {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {CPM_PORTE, 16, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {CPM_PORTE, 21, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 22, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 23, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 24, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 25, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 26, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 27, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 28, CPM_PIN_OUTPUT},
+       {CPM_PORTE, 29, CPM_PIN_OUTPUT},
+};
+
+static void __init init_ioports(void)
+{
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) {
+               const struct cpm_pin *pin = &adder875_pins[i];
+               cpm1_set_pin(pin->port, pin->pin, pin->flags);
+       }
+
+       cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+
+       /* Set FEC1 and FEC2 to MII mode */
+       clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
+}
+
+static void __init adder875_setup(void)
+{
+       cpm_reset();
+       init_ioports();
+}
+
+static int __init adder875_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+       return of_flat_dt_is_compatible(root, "analogue-and-micro,adder875");
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+       { .compatible = "simple-bus", },
+       {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
+       return 0;
+}
+machine_device_initcall(adder875, declare_of_platform_devices);
+
+define_machine(adder875) {
+       .name = "Adder MPC875",
+       .probe = adder875_probe,
+       .setup_arch = adder875_setup,
+       .init_IRQ = m8xx_pic_init,
+       .get_irq = mpc8xx_get_irq,
+       .restart = mpc8xx_restart,
+       .calibrate_decr = generic_calibrate_decr,
+       .set_rtc_time = mpc8xx_set_rtc_time,
+       .get_rtc_time = mpc8xx_get_rtc_time,
+       .progress = udbg_progress,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/ep88xc.c powerpc.git/arch/powerpc/platforms/8xx/ep88xc.c
--- linux-2.6.24/arch/powerpc/platforms/8xx/ep88xc.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/ep88xc.c     2008-01-28 20:25:49.000000000 +0100
@@ -155,12 +155,11 @@
 static int __init declare_of_platform_devices(void)
 {
        /* Publish the QE devices */
-       if (machine_is(ep88xc))
-               of_platform_bus_probe(NULL, of_bus_ids, NULL);
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
 
        return 0;
 }
-device_initcall(declare_of_platform_devices);
+machine_device_initcall(ep88xc, declare_of_platform_devices);
 
 define_machine(ep88xc) {
        .name = "Embedded Planet EP88xC",
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/m8xx_setup.c powerpc.git/arch/powerpc/platforms/8xx/m8xx_setup.c
--- linux-2.6.24/arch/powerpc/platforms/8xx/m8xx_setup.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/m8xx_setup.c 2008-01-28 20:25:49.000000000 +0100
@@ -120,7 +120,7 @@
        ppc_tb_freq /= 16;
        ppc_proc_freq = 50000000;
        if (!get_freq("clock-frequency", &ppc_proc_freq))
-               printk(KERN_ERR "WARNING: Estimating processor frequency"
+               printk(KERN_ERR "WARNING: Estimating processor frequency "
                                "(not found)\n");
 
        printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/mpc86xads.h powerpc.git/arch/powerpc/platforms/8xx/mpc86xads.h
--- linux-2.6.24/arch/powerpc/platforms/8xx/mpc86xads.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/mpc86xads.h  2008-01-28 20:25:49.000000000 +0100
@@ -15,27 +15,6 @@
 #ifndef __ASM_MPC86XADS_H__
 #define __ASM_MPC86XADS_H__
 
-#include <sysdev/fsl_soc.h>
-
-/* U-Boot maps BCSR to 0xff080000 */
-#define BCSR_ADDR              ((uint)0xff080000)
-#define BCSR_SIZE              ((uint)32)
-#define BCSR0                  ((uint)(BCSR_ADDR + 0x00))
-#define BCSR1                  ((uint)(BCSR_ADDR + 0x04))
-#define BCSR2                  ((uint)(BCSR_ADDR + 0x08))
-#define BCSR3                  ((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4                  ((uint)(BCSR_ADDR + 0x10))
-
-#define CFG_PHYDEV_ADDR                ((uint)0xff0a0000)
-#define BCSR5                  ((uint)(CFG_PHYDEV_ADDR + 0x300))
-
-#define MPC8xx_CPM_OFFSET      (0x9c0)
-#define CPM_MAP_ADDR           (get_immrbase() + MPC8xx_CPM_OFFSET)
-#define CPM_IRQ_OFFSET         16     // for compability with cpm_uart driver
-
-#define PCMCIA_MEM_ADDR                ((uint)0xff020000)
-#define PCMCIA_MEM_SIZE                ((uint)(64 * 1024))
-
 /* Bits of interest in the BCSRs.
  */
 #define BCSR1_ETHEN            ((uint)0x20000000)
@@ -64,28 +43,5 @@
 #define BCSR5_MII1_EN          0x02
 #define BCSR5_MII1_RST         0x01
 
-/* Interrupt level assignments */
-#define PHY_INTERRUPT  SIU_IRQ7        /* PHY link change interrupt */
-#define SIU_INT_FEC1   SIU_LEVEL1      /* FEC1 interrupt */
-#define FEC_INTERRUPT  SIU_INT_FEC1    /* FEC interrupt */
-
-/* We don't use the 8259 */
-#define NR_8259_INTS   0
-
-/* CPM Ethernet through SCC1 */
-#define PA_ENET_RXD     ((ushort)0x0001)
-#define PA_ENET_TXD     ((ushort)0x0002)
-#define PA_ENET_TCLK    ((ushort)0x0100)
-#define PA_ENET_RCLK    ((ushort)0x0200)
-#define PB_ENET_TENA    ((uint)0x00001000)
-#define PC_ENET_CLSN    ((ushort)0x0010)
-#define PC_ENET_RENA    ((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK  ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000002c)
-
 #endif /* __ASM_MPC86XADS_H__ */
 #endif /* __KERNEL__ */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/mpc86xads_setup.c powerpc.git/arch/powerpc/platforms/8xx/mpc86xads_setup.c
--- linux-2.6.24/arch/powerpc/platforms/8xx/mpc86xads_setup.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/mpc86xads_setup.c    2008-01-28 20:25:49.000000000 +0100
@@ -6,264 +6,133 @@
  *
  * Copyright 2005 MontaVista Software Inc.
  *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/root_dev.h>
-
-#include <linux/fs_enet_pd.h>
-#include <linux/fs_uart_pd.h>
-#include <linux/mii.h>
+#include <linux/of_platform.h>
 
-#include <asm/delay.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/time.h>
 #include <asm/mpc8xx.h>
 #include <asm/8xx_immap.h>
 #include <asm/commproc.h>
 #include <asm/fs_pd.h>
-#include <asm/prom.h>
+#include <asm/udbg.h>
 
 #include <sysdev/commproc.h>
 
-static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
-static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
-static void init_scc1_ioports(struct fs_platform_info* ptr);
-
-void __init mpc86xads_board_setup(void)
-{
-       cpm8xx_t *cp;
-       unsigned int *bcsr_io;
-       u8 tmpval8;
-
-       bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-       cp = (cpm8xx_t *)immr_map(im_cpm);
+#include "mpc86xads.h"
 
-       if (bcsr_io == NULL) {
-               printk(KERN_CRIT "Could not remap BCSR\n");
-               return;
-       }
-#ifdef CONFIG_SERIAL_CPM_SMC1
-       clrbits32(bcsr_io, BCSR1_RS232EN_1);
-       clrbits32(&cp->cp_simode, 0xe0000000 >> 17);    /* brg1 */
-       tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX);
-       out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
-       clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
-#else
-       setbits32(bcsr_io,BCSR1_RS232EN_1);
-       out_be16(&cp->cp_smc[0].smc_smcmr, 0);
-       out_8(&cp->cp_smc[0].smc_smce, 0);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-       clrbits32(bcsr_io,BCSR1_RS232EN_2);
-       clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
-       setbits32(&cp->cp_simode, 0x20000000 >> 1);     /* brg2 */
-       tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX);
-       out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
-       clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
-
-       init_smc2_uart_ioports(0);
-#else
-       setbits32(bcsr_io,BCSR1_RS232EN_2);
-       out_be16(&cp->cp_smc[1].smc_smcmr, 0);
-       out_8(&cp->cp_smc[1].smc_smce, 0);
-#endif
-       immr_unmap(cp);
-       iounmap(bcsr_io);
-}
+struct cpm_pin {
+       int port, pin, flags;
+};
 
+static struct cpm_pin mpc866ads_pins[] = {
+       /* SMC1 */
+       {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+       {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+       /* SMC2 */
+       {CPM_PORTB, 21, CPM_PIN_INPUT}, /* RX */
+       {CPM_PORTB, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+       /* SCC1 */
+       {CPM_PORTA, 6, CPM_PIN_INPUT}, /* CLK1 */
+       {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
+       {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
+       {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
+       {CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+       {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
+       {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
+
+       /* MII */
+       {CPM_PORTD, 3, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 4, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 5, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 6, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 7, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 8, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 9, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 10, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 11, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 12, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 13, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 14, CPM_PIN_OUTPUT},
+       {CPM_PORTD, 15, CPM_PIN_OUTPUT},
+};
 
-static void init_fec1_ioports(struct fs_platform_info* ptr)
+static void __init init_ioports(void)
 {
-       iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport);
+       int i;
 
-       /* configure FEC1 pins  */
+       for (i = 0; i < ARRAY_SIZE(mpc866ads_pins); i++) {
+               struct cpm_pin *pin = &mpc866ads_pins[i];
+               cpm1_set_pin(pin->port, pin->pin, pin->flags);
+       }
 
-       setbits16(&io_port->iop_pdpar, 0x1fff);
-       setbits16(&io_port->iop_pddir, 0x1fff);
+       cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+       cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+       cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK1, CPM_CLK_TX);
+       cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX);
 
-       immr_unmap(io_port);
+       /* Set FEC1 and FEC2 to MII mode */
+       clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
 }
 
-void init_fec_ioports(struct fs_platform_info *fpi)
+static void __init mpc86xads_setup_arch(void)
 {
-       int fec_no = fs_get_fec_index(fpi->fs_no);
+       struct device_node *np;
+       u32 __iomem *bcsr_io;
+
+       cpm_reset();
+       init_ioports();
 
-       switch (fec_no) {
-       case 0:
-               init_fec1_ioports(fpi);
-               break;
-       default:
-               printk(KERN_ERR "init_fec_ioports: invalid FEC number\n");
+       np = of_find_compatible_node(NULL, NULL, "fsl,mpc866ads-bcsr");
+       if (!np) {
+               printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n");
                return;
        }
-}
 
-static void init_scc1_ioports(struct fs_platform_info* fpi)
-{
-       unsigned *bcsr_io;
-       iop8xx_t *io_port;
-       cpm8xx_t *cp;
-
-       bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
-       io_port = (iop8xx_t *)immr_map(im_ioport);
-       cp = (cpm8xx_t *)immr_map(im_cpm);
+       bcsr_io = of_iomap(np, 0);
+       of_node_put(np);
 
        if (bcsr_io == NULL) {
                printk(KERN_CRIT "Could not remap BCSR\n");
                return;
        }
 
-       /* Configure port A pins for Txd and Rxd.
-        */
-       setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
-       clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
-       clrbits16(&io_port->iop_paodr, PA_ENET_TXD);
-
-       /* Configure port C pins to enable CLSN and RENA.
-        */
-       clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
-       clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
-       setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
-
-       /* Configure port A for TCLK and RCLK.
-        */
-       setbits16(&io_port->iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
-        clrbits16(&io_port->iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
-        clrbits32(&cp->cp_pbpar, PB_ENET_TENA);
-        clrbits32(&cp->cp_pbdir, PB_ENET_TENA);
-
-       /* Configure Serial Interface clock routing.
-        * First, clear all SCC bits to zero, then set the ones we want.
-        */
-       clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
-       setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
-
-       /* In the original SCC enet driver the following code is placed at
-          the end of the initialization */
-        setbits32(&cp->cp_pbpar, PB_ENET_TENA);
-        setbits32(&cp->cp_pbdir, PB_ENET_TENA);
-
-       clrbits32(bcsr_io+1, BCSR1_ETHEN);
+       clrbits32(bcsr_io, BCSR1_RS232EN_1 | BCSR1_RS232EN_2 | BCSR1_ETHEN);
        iounmap(bcsr_io);
-       immr_unmap(cp);
-       immr_unmap(io_port);
-}
-
-void init_scc_ioports(struct fs_platform_info *fpi)
-{
-       int scc_no = fs_get_scc_index(fpi->fs_no);
-
-       switch (scc_no) {
-       case 0:
-               init_scc1_ioports(fpi);
-               break;
-       default:
-               printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
-               return;
-       }
 }
 
-
-
-static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr)
+static int __init mpc86xads_probe(void)
 {
-        unsigned *bcsr_io;
-       cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
-
-       setbits32(&cp->cp_pbpar, 0x000000c0);
-       clrbits32(&cp->cp_pbdir, 0x000000c0);
-       clrbits16(&cp->cp_pbodr, 0x00c0);
-       immr_unmap(cp);
-
-        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-        if (bcsr_io == NULL) {
-                printk(KERN_CRIT "Could not remap BCSR1\n");
-                return;
-        }
-        clrbits32(bcsr_io,BCSR1_RS232EN_1);
-        iounmap(bcsr_io);
+       unsigned long root = of_get_flat_dt_root();
+       return of_flat_dt_is_compatible(root, "fsl,mpc866ads");
 }
 
-static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi)
-{
-        unsigned *bcsr_io;
-       cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
-
-       setbits32(&cp->cp_pbpar, 0x00000c00);
-       clrbits32(&cp->cp_pbdir, 0x00000c00);
-       clrbits16(&cp->cp_pbodr, 0x0c00);
-       immr_unmap(cp);
-
-        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-        if (bcsr_io == NULL) {
-                printk(KERN_CRIT "Could not remap BCSR1\n");
-                return;
-        }
-        clrbits32(bcsr_io,BCSR1_RS232EN_2);
-        iounmap(bcsr_io);
-}
+static struct of_device_id __initdata of_bus_ids[] = {
+       { .name = "soc", },
+       { .name = "cpm", },
+       { .name = "localbus", },
+       {},
+};
 
-void init_smc_ioports(struct fs_uart_platform_info *data)
+static int __init declare_of_platform_devices(void)
 {
-       int smc_no = fs_uart_id_fsid2smc(data->fs_no);
-
-       switch (smc_no) {
-       case 0:
-               init_smc1_uart_ioports(data);
-               data->brg = data->clk_rx;
-               break;
-       case 1:
-               init_smc2_uart_ioports(data);
-               data->brg = data->clk_rx;
-               break;
-       default:
-               printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
-               return;
-       }
-}
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
 
-int platform_device_skip(const char *model, int id)
-{
        return 0;
 }
-
-static void __init mpc86xads_setup_arch(void)
-{
-       cpm_reset();
-
-       mpc86xads_board_setup();
-
-       ROOT_DEV = Root_NFS;
-}
-
-static int __init mpc86xads_probe(void)
-{
-       char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
-                                         "model", NULL);
-       if (model == NULL)
-               return 0;
-       if (strcmp(model, "MPC866ADS"))
-               return 0;
-
-       return 1;
-}
+machine_device_initcall(mpc86x_ads, declare_of_platform_devices);
 
 define_machine(mpc86x_ads) {
        .name                   = "MPC86x ADS",
@@ -275,4 +144,5 @@
        .calibrate_decr         = mpc8xx_calibrate_decr,
        .set_rtc_time           = mpc8xx_set_rtc_time,
        .get_rtc_time           = mpc8xx_get_rtc_time,
+       .progress               = udbg_progress,
 };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/8xx/mpc885ads_setup.c powerpc.git/arch/powerpc/platforms/8xx/mpc885ads_setup.c
--- linux-2.6.24/arch/powerpc/platforms/8xx/mpc885ads_setup.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/8xx/mpc885ads_setup.c    2008-01-28 20:25:49.000000000 +0100
@@ -264,12 +264,11 @@
 static int __init declare_of_platform_devices(void)
 {
        /* Publish the QE devices */
-       if (machine_is(mpc885_ads))
-               of_platform_bus_probe(NULL, of_bus_ids, NULL);
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
 
        return 0;
 }
-device_initcall(declare_of_platform_devices);
+machine_device_initcall(mpc885_ads, declare_of_platform_devices);
 
 define_machine(mpc885_ads) {
        .name                   = "Freescale MPC885 ADS",
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/Kconfig powerpc.git/arch/powerpc/platforms/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/Kconfig 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/Kconfig  2008-01-28 20:25:49.000000000 +0100
@@ -22,6 +22,7 @@
        depends on 6xx
        select FSL_SOC
        select 83xx
+       select IPIC
        select WANT_DEVICE_TREE
 
 config PPC_86xx
@@ -80,6 +81,10 @@
        bool
        default y
 
+config IPIC
+       bool
+       default n
+
 config MPIC
        bool
        default n
@@ -265,6 +270,7 @@
 config QUICC_ENGINE
        bool
        select PPC_LIB_RHEAP
+       select CRC32
        help
          The QUICC Engine (QE) is a new generation of communications
          coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
@@ -315,6 +321,12 @@
 config CPM
        bool
 
+config OF_RTC
+       bool
+       help
+         Uses information from the OF or flattened device tree to instatiate
+         platform devices for direct mapped RTC chips like the DS1742 or DS1743.
+
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
 endmenu
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/Kconfig.cputype powerpc.git/arch/powerpc/platforms/Kconfig.cputype
--- linux-2.6.24/arch/powerpc/platforms/Kconfig.cputype 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/Kconfig.cputype  2008-01-28 20:25:49.000000000 +0100
@@ -43,6 +43,7 @@
        bool "AMCC 40x"
        select PPC_DCR_NATIVE
        select WANT_DEVICE_TREE
+       select PPC_UDBG_16550
 
 config 44x
        bool "AMCC 44x"
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/Makefile powerpc.git/arch/powerpc/platforms/cell/Makefile
--- linux-2.6.24/arch/powerpc/platforms/cell/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/Makefile    2008-01-28 20:25:49.000000000 +0100
@@ -20,7 +20,7 @@
 
 obj-$(CONFIG_SPU_BASE)                 += spu_callbacks.o spu_base.o \
                                           spu_notify.o \
-                                          spu_syscalls.o \
+                                          spu_syscalls.o spu_fault.o \
                                           $(spu-priv1-y) \
                                           $(spu-manage-y) \
                                           spufs/
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/cbe_cpufreq.c powerpc.git/arch/powerpc/platforms/cell/cbe_cpufreq.c
--- linux-2.6.24/arch/powerpc/platforms/cell/cbe_cpufreq.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/cbe_cpufreq.c       2008-01-28 20:25:49.000000000 +0100
@@ -21,8 +21,9 @@
  */
 
 #include <linux/cpufreq.h>
+#include <linux/of_platform.h>
+
 #include <asm/machdep.h>
-#include <asm/of_platform.h>
 #include <asm/prom.h>
 #include <asm/cell-regs.h>
 #include "cbe_cpufreq.h"
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c powerpc.git/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
--- linux-2.6.24/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c   2008-01-28 20:25:49.000000000 +0100
@@ -23,7 +23,8 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/timer.h>
-#include <asm/of_platform.h>
+#include <linux/of_platform.h>
+
 #include <asm/processor.h>
 #include <asm/prom.h>
 #include <asm/pmi.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/cbe_regs.c powerpc.git/arch/powerpc/platforms/cell/cbe_regs.c
--- linux-2.6.24/arch/powerpc/platforms/cell/cbe_regs.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/cbe_regs.c  2008-01-28 20:25:49.000000000 +0100
@@ -9,13 +9,13 @@
 #include <linux/percpu.h>
 #include <linux/types.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
 #include <asm/ptrace.h>
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
 #include <asm/cell-regs.h>
 
 /*
@@ -256,6 +256,7 @@
                        printk(KERN_ERR "cbe_regs: More BE chips than supported"
                               "!\n");
                        cbe_regs_map_count--;
+                       of_node_put(cpu);
                        return;
                }
                map->cpu_node = cpu;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/io-workarounds.c powerpc.git/arch/powerpc/platforms/cell/io-workarounds.c
--- linux-2.6.24/arch/powerpc/platforms/cell/io-workarounds.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/io-workarounds.c    2008-01-28 20:25:49.000000000 +0100
@@ -238,7 +238,7 @@
 static void __init spider_pci_add_one(struct pci_controller *phb)
 {
        struct spider_pci_bus *bus = &spider_pci_busses[spider_pci_count];
-       struct device_node *np = phb->arch_data;
+       struct device_node *np = phb->dn;
        struct resource rsrc;
        void __iomem *regs;
 
@@ -309,15 +309,12 @@
 {
        struct pci_controller *phb;
 
-       if (!machine_is(cell))
-               return 0;
-
        /* Find spider bridges. We assume they have been all probed
         * in setup_arch(). If that was to change, we would need to
         * update this code to cope with dynamically added busses
         */
        list_for_each_entry(phb, &hose_list, list_node) {
-               struct device_node *np = phb->arch_data;
+               struct device_node *np = phb->dn;
                const char *model = of_get_property(np, "model", NULL);
 
                /* If no model property or name isn't exactly "pci", skip */
@@ -343,4 +340,4 @@
 
        return 0;
 }
-arch_initcall(spider_pci_workaround_init);
+machine_arch_initcall(cell, spider_pci_workaround_init);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/iommu.c powerpc.git/arch/powerpc/platforms/cell/iommu.c
--- linux-2.6.24/arch/powerpc/platforms/cell/iommu.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/iommu.c     2008-01-28 20:25:49.000000000 +0100
@@ -26,14 +26,15 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
+#include <linux/of_platform.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
 #include <asm/udbg.h>
-#include <asm/of_platform.h>
 #include <asm/lmb.h>
+#include <asm/firmware.h>
 #include <asm/cell-regs.h>
 
 #include "interrupt.h"
@@ -309,8 +310,8 @@
 {
        struct page *page;
        int ret, i;
-       unsigned long reg, segments, pages_per_segment, ptab_size, n_pte_pages;
-       unsigned long xlate_base;
+       unsigned long reg, segments, pages_per_segment, ptab_size, stab_size,
+                     n_pte_pages, xlate_base;
        unsigned int virq;
 
        if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
@@ -327,7 +328,8 @@
                        __FUNCTION__, iommu->nid, segments, pages_per_segment);
 
        /* set up the segment table */
-       page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
+       stab_size = segments * sizeof(unsigned long);
+       page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
        BUG_ON(!page);
        iommu->stab = page_address(page);
        clear_page(iommu->stab);
@@ -489,15 +491,18 @@
        return NULL;
 }
 
+static unsigned long cell_dma_direct_offset;
+
 static void cell_dma_dev_setup(struct device *dev)
 {
        struct iommu_window *window;
        struct cbe_iommu *iommu;
        struct dev_archdata *archdata = &dev->archdata;
 
-       /* If we run without iommu, no need to do anything */
-       if (get_pci_dma_ops() == &dma_direct_ops)
+       if (get_pci_dma_ops() == &dma_direct_ops) {
+               archdata->dma_data = (void *)cell_dma_direct_offset;
                return;
+       }
 
        /* Current implementation uses the first window available in that
         * node's iommu. We -might- do something smarter later though it may
@@ -653,7 +658,7 @@
 
        /* If we have no Axon, we set up the spider DMA magic offset */
        if (of_find_node_by_name(NULL, "axon") == NULL)
-               dma_direct_offset = SPIDER_DMA_OFFSET;
+               cell_dma_direct_offset = SPIDER_DMA_OFFSET;
 
        /* Now we need to check to see where the memory is mapped
         * in PCI space. We assume that all busses use the same dma
@@ -687,10 +692,13 @@
                return -ENODEV;
        }
 
-       dma_direct_offset += base;
+       cell_dma_direct_offset += base;
+
+       if (cell_dma_direct_offset != 0)
+               ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
 
        printk("iommu: disabled, direct DMA offset is 0x%lx\n",
-              dma_direct_offset);
+              cell_dma_direct_offset);
 
        return 0;
 }
@@ -699,9 +707,6 @@
 {
        struct device_node *np;
 
-       if (!machine_is(cell))
-               return -ENODEV;
-
        /* If IOMMU is disabled or we have little enough RAM to not need
         * to enable it, we setup a direct mapping.
         *
@@ -744,5 +749,6 @@
 
        return 0;
 }
-arch_initcall(cell_iommu_init);
+machine_arch_initcall(cell, cell_iommu_init);
+machine_arch_initcall(celleb_native, cell_iommu_init);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/pmu.c powerpc.git/arch/powerpc/platforms/cell/pmu.c
--- linux-2.6.24/arch/powerpc/platforms/cell/pmu.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/pmu.c       2008-01-28 20:25:49.000000000 +0100
@@ -213,7 +213,7 @@
                break;
 
        case pm_interval:
-               READ_SHADOW_REG(val, pm_interval);
+               READ_MMIO_UPPER32(val, pm_interval);
                break;
 
        case pm_start_stop:
@@ -381,9 +381,6 @@
        unsigned int irq;
        int rc, node;
 
-       if (!machine_is(cell))
-               return 0;
-
        for_each_node(node) {
                irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
                                               (node << IIC_IRQ_NODE_SHIFT));
@@ -404,7 +401,7 @@
 
        return 0;
 }
-arch_initcall(cbe_init_pm_irq);
+machine_arch_initcall(cell, cbe_init_pm_irq);
 
 void cbe_sync_irq(int node)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/setup.c powerpc.git/arch/powerpc/platforms/cell/setup.c
--- linux-2.6.24/arch/powerpc/platforms/cell/setup.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/setup.c     2008-01-28 20:25:49.000000000 +0100
@@ -30,6 +30,7 @@
 #include <linux/console.h>
 #include <linux/mutex.h>
 #include <linux/memory_hotplug.h>
+#include <linux/of_platform.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -51,7 +52,6 @@
 #include <asm/spu_priv1.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
-#include <asm/of_platform.h>
 #include <asm/cell-regs.h>
 
 #include "interrupt.h"
@@ -85,9 +85,6 @@
 {
        int node;
 
-       if (!machine_is(cell))
-               return 0;
-
        /* Publish OF platform devices for southbridge IOs */
        of_platform_bus_probe(NULL, NULL, NULL);
 
@@ -101,7 +98,7 @@
        }
        return 0;
 }
-device_initcall(cell_publish_devices);
+machine_device_initcall(cell, cell_publish_devices);
 
 static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/smp.c powerpc.git/arch/powerpc/platforms/cell/smp.c
--- linux-2.6.24/arch/powerpc/platforms/cell/smp.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/smp.c       2008-01-28 20:25:49.000000000 +0100
@@ -42,6 +42,7 @@
 #include <asm/firmware.h>
 #include <asm/system.h>
 #include <asm/rtas.h>
+#include <asm/cputhreads.h>
 
 #include "interrupt.h"
 #include <asm/udbg.h>
@@ -182,7 +183,7 @@
         */
        if (system_state < SYSTEM_RUNNING &&
            cpu_has_feature(CPU_FTR_SMT) &&
-           !smt_enabled_at_boot && nr % 2 != 0)
+           !smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
                return 0;
 
        return 1;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spu_base.c powerpc.git/arch/powerpc/platforms/cell/spu_base.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spu_base.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spu_base.c  2008-01-28 20:25:49.000000000 +0100
@@ -34,6 +34,7 @@
 #include <linux/linux_logo.h>
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
+#include <asm/spu_csa.h>
 #include <asm/xmon.h>
 #include <asm/prom.h>
 
@@ -47,6 +48,13 @@
 EXPORT_SYMBOL_GPL(cbe_spu_info);
 
 /*
+ * The spufs fault-handling code needs to call force_sig_info to raise signals
+ * on DMA errors. Export it here to avoid general kernel-wide access to this
+ * function
+ */
+EXPORT_SYMBOL_GPL(force_sig_info);
+
+/*
  * Protects cbe_spu_info and spu->number.
  */
 static DEFINE_SPINLOCK(spu_lock);
@@ -66,6 +74,10 @@
 static DEFINE_SPINLOCK(spu_full_list_lock);
 static DEFINE_MUTEX(spu_full_list_mutex);
 
+struct spu_slb {
+       u64 esid, vsid;
+};
+
 void spu_invalidate_slbs(struct spu *spu)
 {
        struct spu_priv2 __iomem *priv2 = spu->priv2;
@@ -114,40 +126,36 @@
 }
 EXPORT_SYMBOL_GPL(spu_associate_mm);
 
-static int __spu_trap_invalid_dma(struct spu *spu)
+int spu_64k_pages_available(void)
 {
-       pr_debug("%s\n", __FUNCTION__);
-       spu->dma_callback(spu, SPE_EVENT_INVALID_DMA);
-       return 0;
+       return mmu_psize_defs[MMU_PAGE_64K].shift != 0;
 }
+EXPORT_SYMBOL_GPL(spu_64k_pages_available);
 
-static int __spu_trap_dma_align(struct spu *spu)
+static void spu_restart_dma(struct spu *spu)
 {
-       pr_debug("%s\n", __FUNCTION__);
-       spu->dma_callback(spu, SPE_EVENT_DMA_ALIGNMENT);
-       return 0;
-}
+       struct spu_priv2 __iomem *priv2 = spu->priv2;
 
-static int __spu_trap_error(struct spu *spu)
-{
-       pr_debug("%s\n", __FUNCTION__);
-       spu->dma_callback(spu, SPE_EVENT_SPE_ERROR);
-       return 0;
+       if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags))
+               out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
 }
 
-static void spu_restart_dma(struct spu *spu)
+static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
 {
        struct spu_priv2 __iomem *priv2 = spu->priv2;
 
-       if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags))
-               out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
+       pr_debug("%s: adding SLB[%d] 0x%016lx 0x%016lx\n",
+                       __func__, slbe, slb->vsid, slb->esid);
+
+       out_be64(&priv2->slb_index_W, slbe);
+       out_be64(&priv2->slb_vsid_RW, slb->vsid);
+       out_be64(&priv2->slb_esid_RW, slb->esid);
 }
 
 static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
 {
-       struct spu_priv2 __iomem *priv2 = spu->priv2;
        struct mm_struct *mm = spu->mm;
-       u64 esid, vsid, llp;
+       struct spu_slb slb;
        int psize;
 
        pr_debug("%s\n", __FUNCTION__);
@@ -159,7 +167,7 @@
                printk("%s: invalid access during switch!\n", __func__);
                return 1;
        }
-       esid = (ea & ESID_MASK) | SLB_ESID_V;
+       slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
 
        switch(REGION_ID(ea)) {
        case USER_REGION_ID:
@@ -168,21 +176,21 @@
 #else
                psize = mm->context.user_psize;
 #endif
-               vsid = (get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
-                               SLB_VSID_USER;
+               slb.vsid = (get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M)
+                               << SLB_VSID_SHIFT) | SLB_VSID_USER;
                break;
        case VMALLOC_REGION_ID:
                if (ea < VMALLOC_END)
                        psize = mmu_vmalloc_psize;
                else
                        psize = mmu_io_psize;
-               vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
-                       SLB_VSID_KERNEL;
+               slb.vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M)
+                               << SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
                break;
        case KERNEL_REGION_ID:
                psize = mmu_linear_psize;
-               vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
-                       SLB_VSID_KERNEL;
+               slb.vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M)
+                               << SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
                break;
        default:
                /* Future: support kernel segments so that drivers
@@ -191,11 +199,9 @@
                pr_debug("invalid region access at %016lx\n", ea);
                return 1;
        }
-       llp = mmu_psize_defs[psize].sllp;
+       slb.vsid |= mmu_psize_defs[psize].sllp;
 
-       out_be64(&priv2->slb_index_W, spu->slb_replace);
-       out_be64(&priv2->slb_vsid_RW, vsid | llp);
-       out_be64(&priv2->slb_esid_RW, esid);
+       spu_load_slb(spu, spu->slb_replace, &slb);
 
        spu->slb_replace++;
        if (spu->slb_replace >= 8)
@@ -225,13 +231,83 @@
                return 1;
        }
 
+       spu->class_0_pending = 0;
        spu->dar = ea;
        spu->dsisr = dsisr;
-       mb();
+
        spu->stop_callback(spu);
+
        return 0;
 }
 
+static void __spu_kernel_slb(void *addr, struct spu_slb *slb)
+{
+       unsigned long ea = (unsigned long)addr;
+       u64 llp;
+
+       if (REGION_ID(ea) == KERNEL_REGION_ID)
+               llp = mmu_psize_defs[mmu_linear_psize].sllp;
+       else
+               llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+
+       slb->vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
+               SLB_VSID_KERNEL | llp;
+       slb->esid = (ea & ESID_MASK) | SLB_ESID_V;
+}
+
+/**
+ * Given an array of @nr_slbs SLB entries, @slbs, return non-zero if the
+ * address @new_addr is present.
+ */
+static inline int __slb_present(struct spu_slb *slbs, int nr_slbs,
+               void *new_addr)
+{
+       unsigned long ea = (unsigned long)new_addr;
+       int i;
+
+       for (i = 0; i < nr_slbs; i++)
+               if (!((slbs[i].esid ^ ea) & ESID_MASK))
+                       return 1;
+
+       return 0;
+}
+
+/**
+ * Setup the SPU kernel SLBs, in preparation for a context save/restore. We
+ * need to map both the context save area, and the save/restore code.
+ *
+ * Because the lscsa and code may cross segment boundaires, we check to see
+ * if mappings are required for the start and end of each range. We currently
+ * assume that the mappings are smaller that one segment - if not, something
+ * is seriously wrong.
+ */
+void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
+               void *code, int code_size)
+{
+       struct spu_slb slbs[4];
+       int i, nr_slbs = 0;
+       /* start and end addresses of both mappings */
+       void *addrs[] = {
+               lscsa, (void *)lscsa + sizeof(*lscsa) - 1,
+               code, code + code_size - 1
+       };
+
+       /* check the set of addresses, and create a new entry in the slbs array
+        * if there isn't already a SLB for that address */
+       for (i = 0; i < ARRAY_SIZE(addrs); i++) {
+               if (__slb_present(slbs, nr_slbs, addrs[i]))
+                       continue;
+
+               __spu_kernel_slb(addrs[i], &slbs[nr_slbs]);
+               nr_slbs++;
+       }
+
+       /* Add the set of SLBs */
+       for (i = 0; i < nr_slbs; i++)
+               spu_load_slb(spu, i, &slbs[i]);
+}
+EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs);
+
 static irqreturn_t
 spu_irq_class_0(int irq, void *data)
 {
@@ -240,12 +316,13 @@
 
        spu = data;
 
+       spin_lock(&spu->register_lock);
        mask = spu_int_mask_get(spu, 0);
-       stat = spu_int_stat_get(spu, 0);
-       stat &= mask;
+       stat = spu_int_stat_get(spu, 0) & mask;
 
-       spin_lock(&spu->register_lock);
        spu->class_0_pending |= stat;
+       spu->dsisr = spu_mfc_dsisr_get(spu);
+       spu->dar = spu_mfc_dar_get(spu);
        spin_unlock(&spu->register_lock);
 
        spu->stop_callback(spu);
@@ -255,31 +332,6 @@
        return IRQ_HANDLED;
 }
 
-int
-spu_irq_class_0_bottom(struct spu *spu)
-{
-       unsigned long flags;
-       unsigned long stat;
-
-       spin_lock_irqsave(&spu->register_lock, flags);
-       stat = spu->class_0_pending;
-       spu->class_0_pending = 0;
-
-       if (stat & 1) /* invalid DMA alignment */
-               __spu_trap_dma_align(spu);
-
-       if (stat & 2) /* invalid MFC DMA */
-               __spu_trap_invalid_dma(spu);
-
-       if (stat & 4) /* error on SPU */
-               __spu_trap_error(spu);
-
-       spin_unlock_irqrestore(&spu->register_lock, flags);
-
-       return (stat & 0x7) ? -EIO : 0;
-}
-EXPORT_SYMBOL_GPL(spu_irq_class_0_bottom);
-
 static irqreturn_t
 spu_irq_class_1(int irq, void *data)
 {
@@ -294,24 +346,23 @@
        stat  = spu_int_stat_get(spu, 1) & mask;
        dar   = spu_mfc_dar_get(spu);
        dsisr = spu_mfc_dsisr_get(spu);
-       if (stat & 2) /* mapping fault */
+       if (stat & CLASS1_STORAGE_FAULT_INTR)
                spu_mfc_dsisr_set(spu, 0ul);
        spu_int_stat_clear(spu, 1, stat);
        spin_unlock(&spu->register_lock);
        pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
                        dar, dsisr);
 
-       if (stat & 1) /* segment fault */
+       if (stat & CLASS1_SEGMENT_FAULT_INTR)
                __spu_trap_data_seg(spu, dar);
 
-       if (stat & 2) { /* mapping fault */
+       if (stat & CLASS1_STORAGE_FAULT_INTR)
                __spu_trap_data_map(spu, dar, dsisr);
-       }
 
-       if (stat & 4) /* ls compare & suspend on get */
+       if (stat & CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR)
                ;
 
-       if (stat & 8) /* ls compare & suspend on put */
+       if (stat & CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR)
                ;
 
        return stat ? IRQ_HANDLED : IRQ_NONE;
@@ -323,6 +374,8 @@
        struct spu *spu;
        unsigned long stat;
        unsigned long mask;
+       const int mailbox_intrs =
+               CLASS2_MAILBOX_THRESHOLD_INTR | CLASS2_MAILBOX_INTR;
 
        spu = data;
        spin_lock(&spu->register_lock);
@@ -330,31 +383,30 @@
        mask = spu_int_mask_get(spu, 2);
        /* ignore interrupts we're not waiting for */
        stat &= mask;
-       /*
-        * mailbox interrupts (0x1 and 0x10) are level triggered.
-        * mask them now before acknowledging.
-        */
-       if (stat & 0x11)
-               spu_int_mask_and(spu, 2, ~(stat & 0x11));
+
+       /* mailbox interrupts are level triggered. mask them now before
+        * acknowledging */
+       if (stat & mailbox_intrs)
+               spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs));
        /* acknowledge all interrupts before the callbacks */
        spu_int_stat_clear(spu, 2, stat);
        spin_unlock(&spu->register_lock);
 
        pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask);
 
-       if (stat & 1)  /* PPC core mailbox */
+       if (stat & CLASS2_MAILBOX_INTR)
                spu->ibox_callback(spu);
 
-       if (stat & 2) /* SPU stop-and-signal */
+       if (stat & CLASS2_SPU_STOP_INTR)
                spu->stop_callback(spu);
 
-       if (stat & 4) /* SPU halted */
+       if (stat & CLASS2_SPU_HALT_INTR)
                spu->stop_callback(spu);
 
-       if (stat & 8) /* DMA tag group complete */
+       if (stat & CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR)
                spu->mfc_callback(spu);
 
-       if (stat & 0x10) /* SPU mailbox threshold */
+       if (stat & CLASS2_MAILBOX_THRESHOLD_INTR)
                spu->wbox_callback(spu);
 
        spu->stats.class2_intr++;
@@ -479,13 +531,27 @@
 int spu_add_sysdev_attr_group(struct attribute_group *attrs)
 {
        struct spu *spu;
+       int rc = 0;
 
        mutex_lock(&spu_full_list_mutex);
-       list_for_each_entry(spu, &spu_full_list, full_list)
-               sysfs_create_group(&spu->sysdev.kobj, attrs);
+       list_for_each_entry(spu, &spu_full_list, full_list) {
+               rc = sysfs_create_group(&spu->sysdev.kobj, attrs);
+
+               /* we're in trouble here, but try unwinding anyway */
+               if (rc) {
+                       printk(KERN_ERR "%s: can't create sysfs group '%s'\n",
+                                       __func__, attrs->name);
+
+                       list_for_each_entry_continue_reverse(spu,
+                                       &spu_full_list, full_list)
+                               sysfs_remove_group(&spu->sysdev.kobj, attrs);
+                       break;
+               }
+       }
+
        mutex_unlock(&spu_full_list_mutex);
 
-       return 0;
+       return rc;
 }
 EXPORT_SYMBOL_GPL(spu_add_sysdev_attr_group);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spu_fault.c powerpc.git/arch/powerpc/platforms/cell/spu_fault.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spu_fault.c        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spu_fault.c 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,98 @@
+/*
+ * SPU mm fault handler
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2007
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ * Author: Jeremy Kerr <jk@ozlabs.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+
+/*
+ * This ought to be kept in sync with the powerpc specific do_page_fault
+ * function. Currently, there are a few corner cases that we haven't had
+ * to handle fortunately.
+ */
+int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
+               unsigned long dsisr, unsigned *flt)
+{
+       struct vm_area_struct *vma;
+       unsigned long is_write;
+       int ret;
+
+#if 0
+       if (!IS_VALID_EA(ea)) {
+               return -EFAULT;
+       }
+#endif /* XXX */
+       if (mm == NULL) {
+               return -EFAULT;
+       }
+       if (mm->pgd == NULL) {
+               return -EFAULT;
+       }
+
+       down_read(&mm->mmap_sem);
+       vma = find_vma(mm, ea);
+       if (!vma)
+               goto bad_area;
+       if (vma->vm_start <= ea)
+               goto good_area;
+       if (!(vma->vm_flags & VM_GROWSDOWN))
+               goto bad_area;
+       if (expand_stack(vma, ea))
+               goto bad_area;
+good_area:
+       is_write = dsisr & MFC_DSISR_ACCESS_PUT;
+       if (is_write) {
+               if (!(vma->vm_flags & VM_WRITE))
+                       goto bad_area;
+       } else {
+               if (dsisr & MFC_DSISR_ACCESS_DENIED)
+                       goto bad_area;
+               if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+                       goto bad_area;
+       }
+       ret = 0;
+       *flt = handle_mm_fault(mm, vma, ea, is_write);
+       if (unlikely(*flt & VM_FAULT_ERROR)) {
+               if (*flt & VM_FAULT_OOM) {
+                       ret = -ENOMEM;
+                       goto bad_area;
+               } else if (*flt & VM_FAULT_SIGBUS) {
+                       ret = -EFAULT;
+                       goto bad_area;
+               }
+               BUG();
+       }
+       if (*flt & VM_FAULT_MAJOR)
+               current->maj_flt++;
+       else
+               current->min_flt++;
+       up_read(&mm->mmap_sem);
+       return ret;
+
+bad_area:
+       up_read(&mm->mmap_sem);
+       return -EFAULT;
+}
+EXPORT_SYMBOL_GPL(spu_handle_mm_fault);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spu_manage.c powerpc.git/arch/powerpc/platforms/cell/spu_manage.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spu_manage.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spu_manage.c        2008-01-28 20:25:49.000000000 +0100
@@ -35,6 +35,7 @@
 #include <asm/firmware.h>
 #include <asm/prom.h>
 
+#include "spufs/spufs.h"
 #include "interrupt.h"
 
 struct device_node *spu_devnode(struct spu *spu)
@@ -345,7 +346,7 @@
                }
                ret = spu_map_interrupts_old(spu, spe);
                if (ret) {
-                       printk(KERN_ERR "%s: could not map interrupts",
+                       printk(KERN_ERR "%s: could not map interrupts\n",
                                spu->name);
                        goto out_unmap;
                }
@@ -369,6 +370,16 @@
        return 0;
 }
 
+static void enable_spu_by_master_run(struct spu_context *ctx)
+{
+       ctx->ops->master_start(ctx);
+}
+
+static void disable_spu_by_master_run(struct spu_context *ctx)
+{
+       ctx->ops->master_stop(ctx);
+}
+
 /* Hardcoded affinity idxs for qs20 */
 #define QS20_SPES_PER_BE 8
 static int qs20_reg_idxs[QS20_SPES_PER_BE] =   { 0, 2, 4, 6, 7, 5, 3, 1 };
@@ -411,10 +422,15 @@
 
 static int of_has_vicinity(void)
 {
-       struct spu* spu;
+       struct device_node *dn;
 
-       spu = list_first_entry(&cbe_spu_info[0].spus, struct spu, cbe_list);
-       return of_find_property(spu_devnode(spu), "vicinity", NULL) != NULL;
+       for_each_node_by_type(dn, "spe") {
+               if (of_find_property(dn, "vicinity", NULL))  {
+                       of_node_put(dn);
+                       return 1;
+               }
+       }
+       return 0;
 }
 
 static struct spu *devnode_spu(int cbe, struct device_node *dn)
@@ -525,7 +541,7 @@
                if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0"))
                        init_affinity_qs20_harcoded();
                else
-                       printk("No affinity configuration found");
+                       printk("No affinity configuration found\n");
        }
 
        return 0;
@@ -535,5 +551,7 @@
        .enumerate_spus = of_enumerate_spus,
        .create_spu = of_create_spu,
        .destroy_spu = of_destroy_spu,
+       .enable_spu = enable_spu_by_master_run,
+       .disable_spu = disable_spu_by_master_run,
        .init_affinity = init_affinity,
 };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/Makefile powerpc.git/arch/powerpc/platforms/cell/spufs/Makefile
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/Makefile     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/Makefile      2008-01-28 20:25:49.000000000 +0100
@@ -1,8 +1,8 @@
-obj-y += switch.o fault.o lscsa_alloc.o
 
 obj-$(CONFIG_SPU_FS) += spufs.o
 spufs-y += inode.o file.o context.o syscalls.o coredump.o
 spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o
+spufs-y += switch.o fault.o lscsa_alloc.o
 
 # Rules to build switch.o with the help of SPU tool chain
 SPU_CROSS      := spu-
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/backing_ops.c powerpc.git/arch/powerpc/platforms/cell/spufs/backing_ops.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/backing_ops.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/backing_ops.c 2008-01-28 20:25:49.000000000 +0100
@@ -106,16 +106,20 @@
                if (stat & 0xff0000)
                        ret |= POLLIN | POLLRDNORM;
                else {
-                       ctx->csa.priv1.int_stat_class0_RW &= ~0x1;
-                       ctx->csa.priv1.int_mask_class2_RW |= 0x1;
+                       ctx->csa.priv1.int_stat_class2_RW &=
+                               ~CLASS2_MAILBOX_INTR;
+                       ctx->csa.priv1.int_mask_class2_RW |=
+                               CLASS2_ENABLE_MAILBOX_INTR;
                }
        }
        if (events & (POLLOUT | POLLWRNORM)) {
                if (stat & 0x00ff00)
                        ret = POLLOUT | POLLWRNORM;
                else {
-                       ctx->csa.priv1.int_stat_class0_RW &= ~0x10;
-                       ctx->csa.priv1.int_mask_class2_RW |= 0x10;
+                       ctx->csa.priv1.int_stat_class2_RW &=
+                               ~CLASS2_MAILBOX_THRESHOLD_INTR;
+                       ctx->csa.priv1.int_mask_class2_RW |=
+                               CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR;
                }
        }
        spin_unlock_irq(&ctx->csa.register_lock);
@@ -139,7 +143,7 @@
                ret = 4;
        } else {
                /* make sure we get woken up by the interrupt */
-               ctx->csa.priv1.int_mask_class2_RW |= 0x1UL;
+               ctx->csa.priv1.int_mask_class2_RW |= CLASS2_ENABLE_MAILBOX_INTR;
                ret = 0;
        }
        spin_unlock(&ctx->csa.register_lock);
@@ -169,7 +173,8 @@
        } else {
                /* make sure we get woken up by the interrupt when space
                   becomes available */
-               ctx->csa.priv1.int_mask_class2_RW |= 0x10;
+               ctx->csa.priv1.int_mask_class2_RW |=
+                       CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR;
                ret = 0;
        }
        spin_unlock(&ctx->csa.register_lock);
@@ -268,6 +273,11 @@
        return ctx->csa.lscsa->ls;
 }
 
+static void spu_backing_privcntl_write(struct spu_context *ctx, u64 val)
+{
+       ctx->csa.priv2.spu_privcntl_RW = val;
+}
+
 static u32 spu_backing_runcntl_read(struct spu_context *ctx)
 {
        return ctx->csa.prob.spu_runcntl_RW;
@@ -285,6 +295,11 @@
        spin_unlock(&ctx->csa.register_lock);
 }
 
+static void spu_backing_runcntl_stop(struct spu_context *ctx)
+{
+       spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP);
+}
+
 static void spu_backing_master_start(struct spu_context *ctx)
 {
        struct spu_state *csa = &ctx->csa;
@@ -358,7 +373,7 @@
 
 static void spu_backing_restart_dma(struct spu_context *ctx)
 {
-       /* nothing to do here */
+       ctx->csa.priv2.mfc_control_RW |= MFC_CNTL_RESTART_DMA_COMMAND;
 }
 
 struct spu_context_ops spu_backing_ops = {
@@ -379,8 +394,10 @@
        .npc_write = spu_backing_npc_write,
        .status_read = spu_backing_status_read,
        .get_ls = spu_backing_get_ls,
+       .privcntl_write = spu_backing_privcntl_write,
        .runcntl_read = spu_backing_runcntl_read,
        .runcntl_write = spu_backing_runcntl_write,
+       .runcntl_stop = spu_backing_runcntl_stop,
        .master_start = spu_backing_master_start,
        .master_stop = spu_backing_master_stop,
        .set_mfc_query = spu_backing_set_mfc_query,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/context.c powerpc.git/arch/powerpc/platforms/cell/spufs/context.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/context.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/context.c     2008-01-28 20:25:49.000000000 +0100
@@ -52,6 +52,7 @@
        init_waitqueue_head(&ctx->wbox_wq);
        init_waitqueue_head(&ctx->stop_wq);
        init_waitqueue_head(&ctx->mfc_wq);
+       init_waitqueue_head(&ctx->run_wq);
        ctx->state = SPU_STATE_SAVED;
        ctx->ops = &spu_backing_ops;
        ctx->owner = get_task_mm(current);
@@ -105,7 +106,17 @@
 void spu_forget(struct spu_context *ctx)
 {
        struct mm_struct *mm;
-       spu_acquire_saved(ctx);
+
+       /*
+        * This is basically an open-coded spu_acquire_saved, except that
+        * we don't acquire the state mutex interruptible.
+        */
+       mutex_lock(&ctx->state_mutex);
+       if (ctx->state != SPU_STATE_SAVED) {
+               set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags);
+               spu_deactivate(ctx);
+       }
+
        mm = ctx->owner;
        ctx->owner = NULL;
        mmput(mm);
@@ -133,47 +144,23 @@
 }
 
 /**
- * spu_acquire_runnable - lock spu contex and make sure it is in runnable state
+ * spu_acquire_saved - lock spu contex and make sure it is in saved state
  * @ctx:       spu contex to lock
- *
- * Note:
- *     Returns 0 and with the context locked on success
- *     Returns negative error and with the context _unlocked_ on failure.
  */
-int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags)
+int spu_acquire_saved(struct spu_context *ctx)
 {
-       int ret = -EINVAL;
+       int ret;
 
-       spu_acquire(ctx);
-       if (ctx->state == SPU_STATE_SAVED) {
-               /*
-                * Context is about to be freed, so we can't acquire it anymore.
-                */
-               if (!ctx->owner)
-                       goto out_unlock;
-               ret = spu_activate(ctx, flags);
-               if (ret)
-                       goto out_unlock;
-       }
-
-       return 0;
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
 
- out_unlock:
-       spu_release(ctx);
-       return ret;
-}
-
-/**
- * spu_acquire_saved - lock spu contex and make sure it is in saved state
- * @ctx:       spu contex to lock
- */
-void spu_acquire_saved(struct spu_context *ctx)
-{
-       spu_acquire(ctx);
        if (ctx->state != SPU_STATE_SAVED) {
                set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags);
                spu_deactivate(ctx);
        }
+
+       return 0;
 }
 
 /**
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/coredump.c powerpc.git/arch/powerpc/platforms/cell/spufs/coredump.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/coredump.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/coredump.c    2008-01-28 20:25:49.000000000 +0100
@@ -148,7 +148,9 @@
 
        fd = 0;
        while ((ctx = coredump_next_context(&fd)) != NULL) {
-               spu_acquire_saved(ctx);
+               rc = spu_acquire_saved(ctx);
+               if (rc)
+                       break;
                rc = spufs_ctx_note_size(ctx, fd);
                spu_release_saved(ctx);
                if (rc < 0)
@@ -224,7 +226,9 @@
 
        fd = 0;
        while ((ctx = coredump_next_context(&fd)) != NULL) {
-               spu_acquire_saved(ctx);
+               rc = spu_acquire_saved(ctx);
+               if (rc)
+                       return rc;
 
                for (j = 0; spufs_coredump_read[j].name != NULL; j++) {
                        rc = spufs_arch_write_note(ctx, j, file, fd, foffset);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/fault.c powerpc.git/arch/powerpc/platforms/cell/spufs/fault.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/fault.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/fault.c       2008-01-28 20:25:49.000000000 +0100
@@ -28,117 +28,71 @@
 
 #include "spufs.h"
 
-/*
- * This ought to be kept in sync with the powerpc specific do_page_fault
- * function. Currently, there are a few corner cases that we haven't had
- * to handle fortunately.
+/**
+ * Handle an SPE event, depending on context SPU_CREATE_EVENTS_ENABLED flag.
+ *
+ * If the context was created with events, we just set the return event.
+ * Otherwise, send an appropriate signal to the process.
  */
-static int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
-               unsigned long dsisr, unsigned *flt)
-{
-       struct vm_area_struct *vma;
-       unsigned long is_write;
-       int ret;
-
-#if 0
-       if (!IS_VALID_EA(ea)) {
-               return -EFAULT;
-       }
-#endif /* XXX */
-       if (mm == NULL) {
-               return -EFAULT;
-       }
-       if (mm->pgd == NULL) {
-               return -EFAULT;
-       }
-
-       down_read(&mm->mmap_sem);
-       vma = find_vma(mm, ea);
-       if (!vma)
-               goto bad_area;
-       if (vma->vm_start <= ea)
-               goto good_area;
-       if (!(vma->vm_flags & VM_GROWSDOWN))
-               goto bad_area;
-       if (expand_stack(vma, ea))
-               goto bad_area;
-good_area:
-       is_write = dsisr & MFC_DSISR_ACCESS_PUT;
-       if (is_write) {
-               if (!(vma->vm_flags & VM_WRITE))
-                       goto bad_area;
-       } else {
-               if (dsisr & MFC_DSISR_ACCESS_DENIED)
-                       goto bad_area;
-               if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
-                       goto bad_area;
-       }
-       ret = 0;
-       *flt = handle_mm_fault(mm, vma, ea, is_write);
-       if (unlikely(*flt & VM_FAULT_ERROR)) {
-               if (*flt & VM_FAULT_OOM) {
-                       ret = -ENOMEM;
-                       goto bad_area;
-               } else if (*flt & VM_FAULT_SIGBUS) {
-                       ret = -EFAULT;
-                       goto bad_area;
-               }
-               BUG();
-       }
-       if (*flt & VM_FAULT_MAJOR)
-               current->maj_flt++;
-       else
-               current->min_flt++;
-       up_read(&mm->mmap_sem);
-       return ret;
-
-bad_area:
-       up_read(&mm->mmap_sem);
-       return -EFAULT;
-}
-
-static void spufs_handle_dma_error(struct spu_context *ctx,
+static void spufs_handle_event(struct spu_context *ctx,
                                unsigned long ea, int type)
 {
+       siginfo_t info;
+
        if (ctx->flags & SPU_CREATE_EVENTS_ENABLED) {
                ctx->event_return |= type;
                wake_up_all(&ctx->stop_wq);
-       } else {
-               siginfo_t info;
-               memset(&info, 0, sizeof(info));
-
-               switch (type) {
-               case SPE_EVENT_INVALID_DMA:
-                       info.si_signo = SIGBUS;
-                       info.si_code = BUS_OBJERR;
-                       break;
-               case SPE_EVENT_SPE_DATA_STORAGE:
-                       info.si_signo = SIGBUS;
-                       info.si_addr = (void __user *)ea;
-                       info.si_code = BUS_ADRERR;
-                       break;
-               case SPE_EVENT_DMA_ALIGNMENT:
-                       info.si_signo = SIGBUS;
-                       /* DAR isn't set for an alignment fault :( */
-                       info.si_code = BUS_ADRALN;
-                       break;
-               case SPE_EVENT_SPE_ERROR:
-                       info.si_signo = SIGILL;
-                       info.si_addr = (void __user *)(unsigned long)
-                               ctx->ops->npc_read(ctx) - 4;
-                       info.si_code = ILL_ILLOPC;
-                       break;
-               }
-               if (info.si_signo)
-                       force_sig_info(info.si_signo, &info, current);
+               return;
        }
+
+       memset(&info, 0, sizeof(info));
+
+       switch (type) {
+       case SPE_EVENT_INVALID_DMA:
+               info.si_signo = SIGBUS;
+               info.si_code = BUS_OBJERR;
+               break;
+       case SPE_EVENT_SPE_DATA_STORAGE:
+               info.si_signo = SIGSEGV;
+               info.si_addr = (void __user *)ea;
+               info.si_code = SEGV_ACCERR;
+               ctx->ops->restart_dma(ctx);
+               break;
+       case SPE_EVENT_DMA_ALIGNMENT:
+               info.si_signo = SIGBUS;
+               /* DAR isn't set for an alignment fault :( */
+               info.si_code = BUS_ADRALN;
+               break;
+       case SPE_EVENT_SPE_ERROR:
+               info.si_signo = SIGILL;
+               info.si_addr = (void __user *)(unsigned long)
+                       ctx->ops->npc_read(ctx) - 4;
+               info.si_code = ILL_ILLOPC;
+               break;
+       }
+
+       if (info.si_signo)
+               force_sig_info(info.si_signo, &info, current);
 }
 
-void spufs_dma_callback(struct spu *spu, int type)
+int spufs_handle_class0(struct spu_context *ctx)
 {
-       spufs_handle_dma_error(spu->ctx, spu->dar, type);
+       unsigned long stat = ctx->csa.class_0_pending & CLASS0_INTR_MASK;
+
+       if (likely(!stat))
+               return 0;
+
+       if (stat & CLASS0_DMA_ALIGNMENT_INTR)
+               spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_DMA_ALIGNMENT);
+
+       if (stat & CLASS0_INVALID_DMA_COMMAND_INTR)
+               spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_INVALID_DMA);
+
+       if (stat & CLASS0_SPU_ERROR_INTR)
+               spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_SPE_ERROR);
+
+       return -EIO;
 }
-EXPORT_SYMBOL_GPL(spufs_dma_callback);
 
 /*
  * bottom half handler for page faults, we can't do this from
@@ -154,7 +108,7 @@
        u64 ea, dsisr, access;
        unsigned long flags;
        unsigned flt = 0;
-       int ret;
+       int ret, ret2;
 
        /*
         * dar and dsisr get passed from the registers
@@ -165,16 +119,8 @@
         * in time, we can still expect to get the same fault
         * the immediately after the context restore.
         */
-       if (ctx->state == SPU_STATE_RUNNABLE) {
-               ea = ctx->spu->dar;
-               dsisr = ctx->spu->dsisr;
-               ctx->spu->dar= ctx->spu->dsisr = 0;
-       } else {
-               ea = ctx->csa.priv1.mfc_dar_RW;
-               dsisr = ctx->csa.priv1.mfc_dsisr_RW;
-               ctx->csa.priv1.mfc_dar_RW = 0;
-               ctx->csa.priv1.mfc_dsisr_RW = 0;
-       }
+       ea = ctx->csa.dar;
+       dsisr = ctx->csa.dsisr;
 
        if (!(dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)))
                return 0;
@@ -201,7 +147,22 @@
        if (ret)
                ret = spu_handle_mm_fault(current->mm, ea, dsisr, &flt);
 
-       spu_acquire(ctx);
+       /*
+        * If spu_acquire fails due to a pending signal we just want to return
+        * EINTR to userspace even if that means missing the dma restart or
+        * updating the page fault statistics.
+        */
+       ret2 = spu_acquire(ctx);
+       if (ret2)
+               goto out;
+
+       /*
+        * Clear dsisr under ctxt lock after handling the fault, so that
+        * time slicing will not preempt the context while the page fault
+        * handler is running. Context switch code removes mappings.
+        */
+       ctx->csa.dar = ctx->csa.dsisr = 0;
+
        /*
         * If we handled the fault successfully and are in runnable
         * state, restart the DMA.
@@ -222,9 +183,9 @@
                if (ctx->spu)
                        ctx->ops->restart_dma(ctx);
        } else
-               spufs_handle_dma_error(ctx, ea, SPE_EVENT_SPE_DATA_STORAGE);
+               spufs_handle_event(ctx, ea, SPE_EVENT_SPE_DATA_STORAGE);
 
+ out:
        spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
        return ret;
 }
-EXPORT_SYMBOL_GPL(spufs_handle_class1);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/file.c powerpc.git/arch/powerpc/platforms/cell/spufs/file.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/file.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/file.c        2008-01-28 20:25:49.000000000 +0100
@@ -40,6 +40,120 @@
 
 #define SPUFS_MMAP_4K (PAGE_SIZE == 0x1000)
 
+/* Simple attribute files */
+struct spufs_attr {
+       int (*get)(void *, u64 *);
+       int (*set)(void *, u64);
+       char get_buf[24];       /* enough to store a u64 and "\n\0" */
+       char set_buf[24];
+       void *data;
+       const char *fmt;        /* format for read operation */
+       struct mutex mutex;     /* protects access to these buffers */
+};
+
+static int spufs_attr_open(struct inode *inode, struct file *file,
+               int (*get)(void *, u64 *), int (*set)(void *, u64),
+               const char *fmt)
+{
+       struct spufs_attr *attr;
+
+       attr = kmalloc(sizeof(*attr), GFP_KERNEL);
+       if (!attr)
+               return -ENOMEM;
+
+       attr->get = get;
+       attr->set = set;
+       attr->data = inode->i_private;
+       attr->fmt = fmt;
+       mutex_init(&attr->mutex);
+       file->private_data = attr;
+
+       return nonseekable_open(inode, file);
+}
+
+static int spufs_attr_release(struct inode *inode, struct file *file)
+{
+       kfree(file->private_data);
+       return 0;
+}
+
+static ssize_t spufs_attr_read(struct file *file, char __user *buf,
+               size_t len, loff_t *ppos)
+{
+       struct spufs_attr *attr;
+       size_t size;
+       ssize_t ret;
+
+       attr = file->private_data;
+       if (!attr->get)
+               return -EACCES;
+
+       ret = mutex_lock_interruptible(&attr->mutex);
+       if (ret)
+               return ret;
+
+       if (*ppos) {            /* continued read */
+               size = strlen(attr->get_buf);
+       } else {                /* first read */
+               u64 val;
+               ret = attr->get(attr->data, &val);
+               if (ret)
+                       goto out;
+
+               size = scnprintf(attr->get_buf, sizeof(attr->get_buf),
+                                attr->fmt, (unsigned long long)val);
+       }
+
+       ret = simple_read_from_buffer(buf, len, ppos, attr->get_buf, size);
+out:
+       mutex_unlock(&attr->mutex);
+       return ret;
+}
+
+static ssize_t spufs_attr_write(struct file *file, const char __user *buf,
+               size_t len, loff_t *ppos)
+{
+       struct spufs_attr *attr;
+       u64 val;
+       size_t size;
+       ssize_t ret;
+
+       attr = file->private_data;
+       if (!attr->set)
+               return -EACCES;
+
+       ret = mutex_lock_interruptible(&attr->mutex);
+       if (ret)
+               return ret;
+
+       ret = -EFAULT;
+       size = min(sizeof(attr->set_buf) - 1, len);
+       if (copy_from_user(attr->set_buf, buf, size))
+               goto out;
+
+       ret = len; /* claim we got the whole input */
+       attr->set_buf[size] = '\0';
+       val = simple_strtol(attr->set_buf, NULL, 0);
+       attr->set(attr->data, val);
+out:
+       mutex_unlock(&attr->mutex);
+       return ret;
+}
+
+#define DEFINE_SPUFS_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt)     \
+static int __fops ## _open(struct inode *inode, struct file *file)     \
+{                                                                      \
+       __simple_attr_check_format(__fmt, 0ull);                        \
+       return spufs_attr_open(inode, file, __get, __set, __fmt);       \
+}                                                                      \
+static struct file_operations __fops = {                               \
+       .owner   = THIS_MODULE,                                         \
+       .open    = __fops ## _open,                                     \
+       .release = spufs_attr_release,                                  \
+       .read    = spufs_attr_read,                                     \
+       .write   = spufs_attr_write,                                    \
+};
+
 
 static int
 spufs_mem_open(struct inode *inode, struct file *file)
@@ -84,9 +198,12 @@
        struct spu_context *ctx = file->private_data;
        ssize_t ret;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ret = __spufs_mem_read(ctx, buffer, size, pos);
        spu_release(ctx);
+
        return ret;
 }
 
@@ -106,7 +223,10 @@
        if (size > LS_SIZE - pos)
                size = LS_SIZE - pos;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
+
        local_store = ctx->ops->get_ls(ctx);
        ret = copy_from_user(local_store + pos, buffer, size);
        spu_release(ctx);
@@ -146,7 +266,8 @@
        pr_debug("spufs_mem_mmap_nopfn address=0x%lx -> 0x%lx, offset=0x%lx\n",
                 addr0, address, offset);
 
-       spu_acquire(ctx);
+       if (spu_acquire(ctx))
+               return NOPFN_REFAULT;
 
        if (ctx->state == SPU_STATE_SAVED) {
                vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
@@ -236,23 +357,32 @@
 {
        struct spu_context *ctx = vma->vm_file->private_data;
        unsigned long area, offset = address - vma->vm_start;
-       int ret;
 
        offset += vma->vm_pgoff << PAGE_SHIFT;
        if (offset >= ps_size)
                return NOPFN_SIGBUS;
 
-       /* error here usually means a signal.. we might want to test
-        * the error code more precisely though
+       /*
+        * We have to wait for context to be loaded before we have
+        * pages to hand out to the user, but we don't want to wait
+        * with the mmap_sem held.
+        * It is possible to drop the mmap_sem here, but then we need
+        * to return NOPFN_REFAULT because the mappings may have
+        * hanged.
         */
-       ret = spu_acquire_runnable(ctx, 0);
-       if (ret)
+       if (spu_acquire(ctx))
                return NOPFN_REFAULT;
 
-       area = ctx->spu->problem_phys + ps_offs;
-       vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT);
-       spu_release(ctx);
+       if (ctx->state == SPU_STATE_SAVED) {
+               up_read(&current->mm->mmap_sem);
+               spufs_wait(ctx->run_wq, ctx->state == SPU_STATE_RUNNABLE);
+               down_read(&current->mm->mmap_sem);
+       } else {
+               area = ctx->spu->problem_phys + ps_offs;
+               vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT);
+       }
 
+       spu_release(ctx);
        return NOPFN_REFAULT;
 }
 
@@ -286,25 +416,32 @@
 #define spufs_cntl_mmap NULL
 #endif /* !SPUFS_MMAP_4K */
 
-static u64 spufs_cntl_get(void *data)
+static int spufs_cntl_get(void *data, u64 *val)
 {
        struct spu_context *ctx = data;
-       u64 val;
+       int ret;
 
-       spu_acquire(ctx);
-       val = ctx->ops->status_read(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
+       *val = ctx->ops->status_read(ctx);
        spu_release(ctx);
 
-       return val;
+       return 0;
 }
 
-static void spufs_cntl_set(void *data, u64 val)
+static int spufs_cntl_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
+       int ret;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ctx->ops->runcntl_write(ctx, val);
        spu_release(ctx);
+
+       return 0;
 }
 
 static int spufs_cntl_open(struct inode *inode, struct file *file)
@@ -317,7 +454,7 @@
        if (!i->i_openers++)
                ctx->cntl = inode->i_mapping;
        mutex_unlock(&ctx->mapping_lock);
-       return simple_attr_open(inode, file, spufs_cntl_get,
+       return spufs_attr_open(inode, file, spufs_cntl_get,
                                        spufs_cntl_set, "0x%08lx");
 }
 
@@ -327,7 +464,7 @@
        struct spufs_inode_info *i = SPUFS_I(inode);
        struct spu_context *ctx = i->i_ctx;
 
-       simple_attr_close(inode, file);
+       spufs_attr_release(inode, file);
 
        mutex_lock(&ctx->mapping_lock);
        if (!--i->i_openers)
@@ -339,8 +476,8 @@
 static const struct file_operations spufs_cntl_fops = {
        .open = spufs_cntl_open,
        .release = spufs_cntl_release,
-       .read = simple_attr_read,
-       .write = simple_attr_write,
+       .read = spufs_attr_read,
+       .write = spufs_attr_write,
        .mmap = spufs_cntl_mmap,
 };
 
@@ -368,7 +505,9 @@
        int ret;
        struct spu_context *ctx = file->private_data;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        ret = __spufs_regs_read(ctx, buffer, size, pos);
        spu_release_saved(ctx);
        return ret;
@@ -387,7 +526,9 @@
                return -EFBIG;
        *pos += size;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
 
        ret = copy_from_user(lscsa->gprs + *pos - size,
                             buffer, size) ? -EFAULT : size;
@@ -419,7 +560,9 @@
        int ret;
        struct spu_context *ctx = file->private_data;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        ret = __spufs_fpcr_read(ctx, buffer, size, pos);
        spu_release_saved(ctx);
        return ret;
@@ -436,10 +579,12 @@
        size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size);
        if (size <= 0)
                return -EFBIG;
-       *pos += size;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
 
+       *pos += size;
        ret = copy_from_user((char *)&lscsa->fpcr + *pos - size,
                             buffer, size) ? -EFAULT : size;
 
@@ -486,7 +631,10 @@
 
        udata = (void __user *)buf;
 
-       spu_acquire(ctx);
+       count = spu_acquire(ctx);
+       if (count)
+               return count;
+
        for (count = 0; (count + 4) <= len; count += 4, udata++) {
                int ret;
                ret = ctx->ops->mbox_read(ctx, &mbox_data);
@@ -522,12 +670,15 @@
                        size_t len, loff_t *pos)
 {
        struct spu_context *ctx = file->private_data;
+       ssize_t ret;
        u32 mbox_stat;
 
        if (len < 4)
                return -EINVAL;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
 
        mbox_stat = ctx->ops->mbox_stat_read(ctx) & 0xff;
 
@@ -562,6 +713,9 @@
 {
        struct spu_context *ctx = spu->ctx;
 
+       if (!ctx)
+               return;
+
        wake_up_all(&ctx->ibox_wq);
        kill_fasync(&ctx->ibox_fasync, SIGIO, POLLIN);
 }
@@ -593,7 +747,9 @@
 
        udata = (void __user *)buf;
 
-       spu_acquire(ctx);
+       count = spu_acquire(ctx);
+       if (count)
+               return count;
 
        /* wait only for the first element */
        count = 0;
@@ -639,7 +795,11 @@
 
        poll_wait(file, &ctx->ibox_wq, wait);
 
-       spu_acquire(ctx);
+       /*
+        * For now keep this uninterruptible and also ignore the rule
+        * that poll should not sleep.  Will be fixed later.
+        */
+       mutex_lock(&ctx->state_mutex);
        mask = ctx->ops->mbox_stat_poll(ctx, POLLIN | POLLRDNORM);
        spu_release(ctx);
 
@@ -657,12 +817,15 @@
                        size_t len, loff_t *pos)
 {
        struct spu_context *ctx = file->private_data;
+       ssize_t ret;
        u32 ibox_stat;
 
        if (len < 4)
                return -EINVAL;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ibox_stat = (ctx->ops->mbox_stat_read(ctx) >> 16) & 0xff;
        spu_release(ctx);
 
@@ -698,6 +861,9 @@
 {
        struct spu_context *ctx = spu->ctx;
 
+       if (!ctx)
+               return;
+
        wake_up_all(&ctx->wbox_wq);
        kill_fasync(&ctx->wbox_fasync, SIGIO, POLLOUT);
 }
@@ -731,7 +897,9 @@
        if (__get_user(wbox_data, udata))
                return -EFAULT;
 
-       spu_acquire(ctx);
+       count = spu_acquire(ctx);
+       if (count)
+               return count;
 
        /*
         * make sure we can at least write one element, by waiting
@@ -772,7 +940,11 @@
 
        poll_wait(file, &ctx->wbox_wq, wait);
 
-       spu_acquire(ctx);
+       /*
+        * For now keep this uninterruptible and also ignore the rule
+        * that poll should not sleep.  Will be fixed later.
+        */
+       mutex_lock(&ctx->state_mutex);
        mask = ctx->ops->mbox_stat_poll(ctx, POLLOUT | POLLWRNORM);
        spu_release(ctx);
 
@@ -790,12 +962,15 @@
                        size_t len, loff_t *pos)
 {
        struct spu_context *ctx = file->private_data;
+       ssize_t ret;
        u32 wbox_stat;
 
        if (len < 4)
                return -EINVAL;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        wbox_stat = (ctx->ops->mbox_stat_read(ctx) >> 8) & 0xff;
        spu_release(ctx);
 
@@ -866,7 +1041,9 @@
        int ret;
        struct spu_context *ctx = file->private_data;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        ret = __spufs_signal1_read(ctx, buf, len, pos);
        spu_release_saved(ctx);
 
@@ -877,6 +1054,7 @@
                        size_t len, loff_t *pos)
 {
        struct spu_context *ctx;
+       ssize_t ret;
        u32 data;
 
        ctx = file->private_data;
@@ -887,7 +1065,9 @@
        if (copy_from_user(&data, buf, 4))
                return -EFAULT;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ctx->ops->signal1_write(ctx, data);
        spu_release(ctx);
 
@@ -997,7 +1177,9 @@
        struct spu_context *ctx = file->private_data;
        int ret;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        ret = __spufs_signal2_read(ctx, buf, len, pos);
        spu_release_saved(ctx);
 
@@ -1008,6 +1190,7 @@
                        size_t len, loff_t *pos)
 {
        struct spu_context *ctx;
+       ssize_t ret;
        u32 data;
 
        ctx = file->private_data;
@@ -1018,7 +1201,9 @@
        if (copy_from_user(&data, buf, 4))
                return -EFAULT;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ctx->ops->signal2_write(ctx, data);
        spu_release(ctx);
 
@@ -1086,33 +1271,42 @@
 #define SPU_ATTR_ACQUIRE_SAVED 2
 
 #define DEFINE_SPUFS_ATTRIBUTE(__name, __get, __set, __fmt, __acquire) \
-static u64 __##__get(void *data)                                       \
+static int __##__get(void *data, u64 *val)                             \
 {                                                                      \
        struct spu_context *ctx = data;                                 \
-       u64 ret;                                                        \
+       int ret = 0;                                                    \
                                                                        \
        if (__acquire == SPU_ATTR_ACQUIRE) {                            \
-               spu_acquire(ctx);                                       \
-               ret = __get(ctx);                                       \
+               ret = spu_acquire(ctx);                                 \
+               if (ret)                                                \
+                       return ret;                                     \
+               *val = __get(ctx);                                      \
                spu_release(ctx);                                       \
        } else if (__acquire == SPU_ATTR_ACQUIRE_SAVED) {               \
-               spu_acquire_saved(ctx);                                 \
-               ret = __get(ctx);                                       \
+               ret = spu_acquire_saved(ctx);                           \
+               if (ret)                                                \
+                       return ret;                                     \
+               *val = __get(ctx);                                      \
                spu_release_saved(ctx);                                 \
        } else                                                          \
-               ret = __get(ctx);                                       \
+               *val = __get(ctx);                                      \
                                                                        \
-       return ret;                                                     \
+       return 0;                                                       \
 }                                                                      \
-DEFINE_SIMPLE_ATTRIBUTE(__name, __##__get, __set, __fmt);
+DEFINE_SPUFS_SIMPLE_ATTRIBUTE(__name, __##__get, __set, __fmt);
 
-static void spufs_signal1_type_set(void *data, u64 val)
+static int spufs_signal1_type_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
+       int ret;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ctx->ops->signal1_type_set(ctx, val);
        spu_release(ctx);
+
+       return 0;
 }
 
 static u64 spufs_signal1_type_get(struct spu_context *ctx)
@@ -1123,13 +1317,18 @@
                       spufs_signal1_type_set, "%llu", SPU_ATTR_ACQUIRE);
 
 
-static void spufs_signal2_type_set(void *data, u64 val)
+static int spufs_signal2_type_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
+       int ret;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ctx->ops->signal2_type_set(ctx, val);
        spu_release(ctx);
+
+       return 0;
 }
 
 static u64 spufs_signal2_type_get(struct spu_context *ctx)
@@ -1329,6 +1528,9 @@
 {
        struct spu_context *ctx = spu->ctx;
 
+       if (!ctx)
+               return;
+
        wake_up_all(&ctx->mfc_wq);
 
        pr_debug("%s %s\n", __FUNCTION__, spu->name);
@@ -1375,12 +1577,17 @@
        if (size != 4)
                goto out;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
+
+       ret = -EINVAL;
        if (file->f_flags & O_NONBLOCK) {
                status = ctx->ops->read_mfc_tagstatus(ctx);
                if (!(status & ctx->tagwait))
                        ret = -EAGAIN;
                else
+                       /* XXX(hch): shouldn't we clear ret here? */
                        ctx->tagwait &= ~status;
        } else {
                ret = spufs_wait(ctx->mfc_wq,
@@ -1505,7 +1712,11 @@
        if (ret)
                goto out;
 
-       ret = spu_acquire_runnable(ctx, 0);
+       ret = spu_acquire(ctx);
+       if (ret)
+               goto out;
+
+       ret = spufs_wait(ctx->run_wq, ctx->state == SPU_STATE_RUNNABLE);
        if (ret)
                goto out;
 
@@ -1539,7 +1750,11 @@
 
        poll_wait(file, &ctx->mfc_wq, wait);
 
-       spu_acquire(ctx);
+       /*
+        * For now keep this uninterruptible and also ignore the rule
+        * that poll should not sleep.  Will be fixed later.
+        */
+       mutex_lock(&ctx->state_mutex);
        ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2);
        free_elements = ctx->ops->get_mfc_free_elements(ctx);
        tagstatus = ctx->ops->read_mfc_tagstatus(ctx);
@@ -1562,7 +1777,9 @@
        struct spu_context *ctx = file->private_data;
        int ret;
 
-       spu_acquire(ctx);
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
 #if 0
 /* this currently hangs */
        ret = spufs_wait(ctx->mfc_wq,
@@ -1605,12 +1822,18 @@
        .mmap    = spufs_mfc_mmap,
 };
 
-static void spufs_npc_set(void *data, u64 val)
+static int spufs_npc_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
-       spu_acquire(ctx);
+       int ret;
+
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
        ctx->ops->npc_write(ctx, val);
        spu_release(ctx);
+
+       return 0;
 }
 
 static u64 spufs_npc_get(struct spu_context *ctx)
@@ -1620,13 +1843,19 @@
 DEFINE_SPUFS_ATTRIBUTE(spufs_npc_ops, spufs_npc_get, spufs_npc_set,
                       "0x%llx\n", SPU_ATTR_ACQUIRE);
 
-static void spufs_decr_set(void *data, u64 val)
+static int spufs_decr_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
        struct spu_lscsa *lscsa = ctx->csa.lscsa;
-       spu_acquire_saved(ctx);
+       int ret;
+
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        lscsa->decr.slot[0] = (u32) val;
        spu_release_saved(ctx);
+
+       return 0;
 }
 
 static u64 spufs_decr_get(struct spu_context *ctx)
@@ -1637,15 +1866,21 @@
 DEFINE_SPUFS_ATTRIBUTE(spufs_decr_ops, spufs_decr_get, spufs_decr_set,
                       "0x%llx\n", SPU_ATTR_ACQUIRE_SAVED);
 
-static void spufs_decr_status_set(void *data, u64 val)
+static int spufs_decr_status_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
-       spu_acquire_saved(ctx);
+       int ret;
+
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        if (val)
                ctx->csa.priv2.mfc_control_RW |= MFC_CNTL_DECREMENTER_RUNNING;
        else
                ctx->csa.priv2.mfc_control_RW &= ~MFC_CNTL_DECREMENTER_RUNNING;
        spu_release_saved(ctx);
+
+       return 0;
 }
 
 static u64 spufs_decr_status_get(struct spu_context *ctx)
@@ -1659,13 +1894,19 @@
                       spufs_decr_status_set, "0x%llx\n",
                       SPU_ATTR_ACQUIRE_SAVED);
 
-static void spufs_event_mask_set(void *data, u64 val)
+static int spufs_event_mask_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
        struct spu_lscsa *lscsa = ctx->csa.lscsa;
-       spu_acquire_saved(ctx);
+       int ret;
+
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        lscsa->event_mask.slot[0] = (u32) val;
        spu_release_saved(ctx);
+
+       return 0;
 }
 
 static u64 spufs_event_mask_get(struct spu_context *ctx)
@@ -1690,13 +1931,19 @@
 DEFINE_SPUFS_ATTRIBUTE(spufs_event_status_ops, spufs_event_status_get,
                       NULL, "0x%llx\n", SPU_ATTR_ACQUIRE_SAVED)
 
-static void spufs_srr0_set(void *data, u64 val)
+static int spufs_srr0_set(void *data, u64 val)
 {
        struct spu_context *ctx = data;
        struct spu_lscsa *lscsa = ctx->csa.lscsa;
-       spu_acquire_saved(ctx);
+       int ret;
+
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        lscsa->srr0.slot[0] = (u32) val;
        spu_release_saved(ctx);
+
+       return 0;
 }
 
 static u64 spufs_srr0_get(struct spu_context *ctx)
@@ -1727,10 +1974,12 @@
        return ctx->object_id;
 }
 
-static void spufs_object_id_set(void *data, u64 id)
+static int spufs_object_id_set(void *data, u64 id)
 {
        struct spu_context *ctx = data;
        ctx->object_id = id;
+
+       return 0;
 }
 
 DEFINE_SPUFS_ATTRIBUTE(spufs_object_id_ops, spufs_object_id_get,
@@ -1777,13 +2026,13 @@
 static ssize_t __spufs_mbox_info_read(struct spu_context *ctx,
                        char __user *buf, size_t len, loff_t *pos)
 {
-       u32 mbox_stat;
        u32 data;
 
-       mbox_stat = ctx->csa.prob.mb_stat_R;
-       if (mbox_stat & 0x0000ff) {
-               data = ctx->csa.prob.pu_mb_R;
-       }
+       /* EOF if there's no entry in the mbox */
+       if (!(ctx->csa.prob.mb_stat_R & 0x0000ff))
+               return 0;
+
+       data = ctx->csa.prob.pu_mb_R;
 
        return simple_read_from_buffer(buf, len, pos, &data, sizeof data);
 }
@@ -1797,7 +2046,9 @@
        if (!access_ok(VERIFY_WRITE, buf, len))
                return -EFAULT;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        spin_lock(&ctx->csa.register_lock);
        ret = __spufs_mbox_info_read(ctx, buf, len, pos);
        spin_unlock(&ctx->csa.register_lock);
@@ -1815,13 +2066,13 @@
 static ssize_t __spufs_ibox_info_read(struct spu_context *ctx,
                                char __user *buf, size_t len, loff_t *pos)
 {
-       u32 ibox_stat;
        u32 data;
 
-       ibox_stat = ctx->csa.prob.mb_stat_R;
-       if (ibox_stat & 0xff0000) {
-               data = ctx->csa.priv2.puint_mb_R;
-       }
+       /* EOF if there's no entry in the ibox */
+       if (!(ctx->csa.prob.mb_stat_R & 0xff0000))
+               return 0;
+
+       data = ctx->csa.priv2.puint_mb_R;
 
        return simple_read_from_buffer(buf, len, pos, &data, sizeof data);
 }
@@ -1835,7 +2086,9 @@
        if (!access_ok(VERIFY_WRITE, buf, len))
                return -EFAULT;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        spin_lock(&ctx->csa.register_lock);
        ret = __spufs_ibox_info_read(ctx, buf, len, pos);
        spin_unlock(&ctx->csa.register_lock);
@@ -1876,7 +2129,9 @@
        if (!access_ok(VERIFY_WRITE, buf, len))
                return -EFAULT;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        spin_lock(&ctx->csa.register_lock);
        ret = __spufs_wbox_info_read(ctx, buf, len, pos);
        spin_unlock(&ctx->csa.register_lock);
@@ -1926,7 +2181,9 @@
        if (!access_ok(VERIFY_WRITE, buf, len))
                return -EFAULT;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        spin_lock(&ctx->csa.register_lock);
        ret = __spufs_dma_info_read(ctx, buf, len, pos);
        spin_unlock(&ctx->csa.register_lock);
@@ -1977,7 +2234,9 @@
        struct spu_context *ctx = file->private_data;
        int ret;
 
-       spu_acquire_saved(ctx);
+       ret = spu_acquire_saved(ctx);
+       if (ret)
+               return ret;
        spin_lock(&ctx->csa.register_lock);
        ret = __spufs_proxydma_info_read(ctx, buf, len, pos);
        spin_unlock(&ctx->csa.register_lock);
@@ -2066,8 +2325,12 @@
 static int spufs_show_stat(struct seq_file *s, void *private)
 {
        struct spu_context *ctx = s->private;
+       int ret;
+
+       ret = spu_acquire(ctx);
+       if (ret)
+               return ret;
 
-       spu_acquire(ctx);
        seq_printf(s, "%s %llu %llu %llu %llu "
                      "%llu %llu %llu %llu %llu %llu %llu %llu\n",
                ctx_state_names[ctx->stats.util_state],
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/hw_ops.c powerpc.git/arch/powerpc/platforms/cell/spufs/hw_ops.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/hw_ops.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/hw_ops.c      2008-01-28 20:25:49.000000000 +0100
@@ -76,16 +76,18 @@
                if (stat & 0xff0000)
                        ret |= POLLIN | POLLRDNORM;
                else {
-                       spu_int_stat_clear(spu, 2, 0x1);
-                       spu_int_mask_or(spu, 2, 0x1);
+                       spu_int_stat_clear(spu, 2, CLASS2_MAILBOX_INTR);
+                       spu_int_mask_or(spu, 2, CLASS2_ENABLE_MAILBOX_INTR);
                }
        }
        if (events & (POLLOUT | POLLWRNORM)) {
                if (stat & 0x00ff00)
                        ret = POLLOUT | POLLWRNORM;
                else {
-                       spu_int_stat_clear(spu, 2, 0x10);
-                       spu_int_mask_or(spu, 2, 0x10);
+                       spu_int_stat_clear(spu, 2,
+                                       CLASS2_MAILBOX_THRESHOLD_INTR);
+                       spu_int_mask_or(spu, 2,
+                                       CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR);
                }
        }
        spin_unlock_irq(&spu->register_lock);
@@ -106,7 +108,7 @@
                ret = 4;
        } else {
                /* make sure we get woken up by the interrupt */
-               spu_int_mask_or(spu, 2, 0x1);
+               spu_int_mask_or(spu, 2, CLASS2_ENABLE_MAILBOX_INTR);
                ret = 0;
        }
        spin_unlock_irq(&spu->register_lock);
@@ -127,7 +129,7 @@
        } else {
                /* make sure we get woken up by the interrupt when space
                   becomes available */
-               spu_int_mask_or(spu, 2, 0x10);
+               spu_int_mask_or(spu, 2, CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR);
                ret = 0;
        }
        spin_unlock_irq(&spu->register_lock);
@@ -206,6 +208,11 @@
        return ctx->spu->local_store;
 }
 
+static void spu_hw_privcntl_write(struct spu_context *ctx, u64 val)
+{
+       out_be64(&ctx->spu->priv2->spu_privcntl_RW, val);
+}
+
 static u32 spu_hw_runcntl_read(struct spu_context *ctx)
 {
        return in_be32(&ctx->spu->problem->spu_runcntl_RW);
@@ -215,11 +222,21 @@
 {
        spin_lock_irq(&ctx->spu->register_lock);
        if (val & SPU_RUNCNTL_ISOLATE)
-               out_be64(&ctx->spu->priv2->spu_privcntl_RW, 4LL);
+               spu_hw_privcntl_write(ctx,
+                       SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK);
        out_be32(&ctx->spu->problem->spu_runcntl_RW, val);
        spin_unlock_irq(&ctx->spu->register_lock);
 }
 
+static void spu_hw_runcntl_stop(struct spu_context *ctx)
+{
+       spin_lock_irq(&ctx->spu->register_lock);
+       out_be32(&ctx->spu->problem->spu_runcntl_RW, SPU_RUNCNTL_STOP);
+       while (in_be32(&ctx->spu->problem->spu_status_R) & SPU_STATUS_RUNNING)
+               cpu_relax();
+       spin_unlock_irq(&ctx->spu->register_lock);
+}
+
 static void spu_hw_master_start(struct spu_context *ctx)
 {
        struct spu *spu = ctx->spu;
@@ -319,8 +336,10 @@
        .npc_write = spu_hw_npc_write,
        .status_read = spu_hw_status_read,
        .get_ls = spu_hw_get_ls,
+       .privcntl_write = spu_hw_privcntl_write,
        .runcntl_read = spu_hw_runcntl_read,
        .runcntl_write = spu_hw_runcntl_write,
+       .runcntl_stop = spu_hw_runcntl_stop,
        .master_start = spu_hw_master_start,
        .master_stop = spu_hw_master_stop,
        .set_mfc_query = spu_hw_set_mfc_query,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c powerpc.git/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c 2008-01-28 20:25:49.000000000 +0100
@@ -28,6 +28,8 @@
 #include <asm/spu_csa.h>
 #include <asm/mmu.h>
 
+#include "spufs.h"
+
 static int spu_alloc_lscsa_std(struct spu_state *csa)
 {
        struct spu_lscsa *lscsa;
@@ -73,7 +75,7 @@
        int             i, j, n_4k;
 
        /* Check availability of 64K pages */
-       if (mmu_psize_defs[MMU_PAGE_64K].shift == 0)
+       if (!spu_64k_pages_available())
                goto fail;
 
        csa->use_big_pages = 1;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/run.c powerpc.git/arch/powerpc/platforms/cell/spufs/run.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/run.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/run.c 2008-01-28 20:25:49.000000000 +0100
@@ -15,24 +15,55 @@
 {
        struct spu_context *ctx = spu->ctx;
 
-       wake_up_all(&ctx->stop_wq);
+       /*
+        * It should be impossible to preempt a context while an exception
+        * is being processed, since the context switch code is specially
+        * coded to deal with interrupts ... But, just in case, sanity check
+        * the context pointer.  It is OK to return doing nothing since
+        * the exception will be regenerated when the context is resumed.
+        */
+       if (ctx) {
+               /* Copy exception arguments into module specific structure */
+               ctx->csa.class_0_pending = spu->class_0_pending;
+               ctx->csa.dsisr = spu->dsisr;
+               ctx->csa.dar = spu->dar;
+
+               /* ensure that the exception status has hit memory before a
+                * thread waiting on the context's stop queue is woken */
+               smp_wmb();
+
+               wake_up_all(&ctx->stop_wq);
+       }
+
+       /* Clear callback arguments from spu structure */
+       spu->class_0_pending = 0;
+       spu->dsisr = 0;
+       spu->dar = 0;
 }
 
-static inline int spu_stopped(struct spu_context *ctx, u32 *stat)
+int spu_stopped(struct spu_context *ctx, u32 *stat)
 {
-       struct spu *spu;
-       u64 pte_fault;
+       u64 dsisr;
+       u32 stopped;
 
        *stat = ctx->ops->status_read(ctx);
 
-       spu = ctx->spu;
-       if (ctx->state != SPU_STATE_RUNNABLE ||
-           test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
+       if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
+               return 1;
+
+       stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
+               SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
+       if (*stat & stopped)
+               return 1;
+
+       dsisr = ctx->csa.dsisr;
+       if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
                return 1;
-       pte_fault = spu->dsisr &
-           (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED);
-       return (!(*stat & SPU_STATUS_RUNNING) || pte_fault || spu->class_0_pending) ?
-               1 : 0;
+
+       if (ctx->csa.class_0_pending)
+               return 1;
+
+       return 0;
 }
 
 static int spu_setup_isolated(struct spu_context *ctx)
@@ -128,34 +159,66 @@
 
 static int spu_run_init(struct spu_context *ctx, u32 *npc)
 {
+       unsigned long runcntl = SPU_RUNCNTL_RUNNABLE;
+       int ret;
+
        spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
 
-       if (ctx->flags & SPU_CREATE_ISOLATE) {
-               unsigned long runcntl;
+       /*
+        * NOSCHED is synchronous scheduling with respect to the caller.
+        * The caller waits for the context to be loaded.
+        */
+       if (ctx->flags & SPU_CREATE_NOSCHED) {
+               if (ctx->state == SPU_STATE_SAVED) {
+                       ret = spu_activate(ctx, 0);
+                       if (ret)
+                               return ret;
+               }
+       }
 
+       /*
+        * Apply special setup as required.
+        */
+       if (ctx->flags & SPU_CREATE_ISOLATE) {
                if (!(ctx->ops->status_read(ctx) & SPU_STATUS_ISOLATED_STATE)) {
-                       int ret = spu_setup_isolated(ctx);
+                       ret = spu_setup_isolated(ctx);
                        if (ret)
                                return ret;
                }
 
-               /* if userspace has set the runcntrl register (eg, to issue an
-                * isolated exit), we need to re-set it here */
+               /*
+                * If userspace has set the runcntrl register (eg, to
+                * issue an isolated exit), we need to re-set it here
+                */
                runcntl = ctx->ops->runcntl_read(ctx) &
                        (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
                if (runcntl == 0)
                        runcntl = SPU_RUNCNTL_RUNNABLE;
+       }
+
+       if (ctx->flags & SPU_CREATE_NOSCHED) {
+               spuctx_switch_state(ctx, SPU_UTIL_USER);
                ctx->ops->runcntl_write(ctx, runcntl);
        } else {
-               unsigned long mode = SPU_PRIVCNTL_MODE_NORMAL;
-               ctx->ops->npc_write(ctx, *npc);
+               unsigned long privcntl;
+
                if (test_thread_flag(TIF_SINGLESTEP))
-                       mode = SPU_PRIVCNTL_MODE_SINGLE_STEP;
-               out_be64(&ctx->spu->priv2->spu_privcntl_RW, mode);
-               ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
-       }
+                       privcntl = SPU_PRIVCNTL_MODE_SINGLE_STEP;
+               else
+                       privcntl = SPU_PRIVCNTL_MODE_NORMAL;
 
-       spuctx_switch_state(ctx, SPU_UTIL_USER);
+               ctx->ops->npc_write(ctx, *npc);
+               ctx->ops->privcntl_write(ctx, privcntl);
+               ctx->ops->runcntl_write(ctx, runcntl);
+
+               if (ctx->state == SPU_STATE_SAVED) {
+                       ret = spu_activate(ctx, 0);
+                       if (ret)
+                               return ret;
+               } else {
+                       spuctx_switch_state(ctx, SPU_UTIL_USER);
+               }
+       }
 
        return 0;
 }
@@ -165,6 +228,8 @@
 {
        int ret = 0;
 
+       spu_del_from_rq(ctx);
+
        *status = ctx->ops->status_read(ctx);
        *npc = ctx->ops->npc_read(ctx);
 
@@ -177,26 +242,6 @@
        return ret;
 }
 
-static int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc,
-                                        u32 *status)
-{
-       int ret;
-
-       ret = spu_run_fini(ctx, npc, status);
-       if (ret)
-               return ret;
-
-       if (*status & (SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_STOPPED_BY_HALT))
-               return *status;
-
-       ret = spu_acquire_runnable(ctx, 0);
-       if (ret)
-               return ret;
-
-       spuctx_switch_state(ctx, SPU_UTIL_USER);
-       return 0;
-}
-
 /*
  * SPU syscall restarting is tricky because we violate the basic
  * assumption that the signal handler is running on the interrupted
@@ -247,7 +292,7 @@
        u32 ls_pointer, npc;
        void __iomem *ls;
        long spu_ret;
-       int ret;
+       int ret, ret2;
 
        /* get syscall block from local store */
        npc = ctx->ops->npc_read(ctx) & ~3;
@@ -269,9 +314,11 @@
                if (spu_ret <= -ERESTARTSYS) {
                        ret = spu_handle_restartsys(ctx, &spu_ret, &npc);
                }
-               spu_acquire(ctx);
+               ret2 = spu_acquire(ctx);
                if (ret == -ERESTARTSYS)
                        return ret;
+               if (ret2)
+                       return -EINTR;
        }
 
        /* write result, jump over indirect pointer */
@@ -281,18 +328,6 @@
        return ret;
 }
 
-static inline int spu_process_events(struct spu_context *ctx)
-{
-       struct spu *spu = ctx->spu;
-       int ret = 0;
-
-       if (spu->class_0_pending)
-               ret = spu_irq_class_0_bottom(spu);
-       if (!ret && signal_pending(current))
-               ret = -ERESTARTSYS;
-       return ret;
-}
-
 long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 {
        int ret;
@@ -302,29 +337,14 @@
        if (mutex_lock_interruptible(&ctx->run_mutex))
                return -ERESTARTSYS;
 
-       ctx->ops->master_start(ctx);
+       spu_enable_spu(ctx);
        ctx->event_return = 0;
 
-       spu_acquire(ctx);
-       if (ctx->state == SPU_STATE_SAVED) {
-               __spu_update_sched_info(ctx);
-               spu_set_timeslice(ctx);
-
-               ret = spu_activate(ctx, 0);
-               if (ret) {
-                       spu_release(ctx);
-                       goto out;
-               }
-       } else {
-               /*
-                * We have to update the scheduling priority under active_mutex
-                * to protect against find_victim().
-                *
-                * No need to update the timeslice ASAP, it will get updated
-                * once the current one has expired.
-                */
-               spu_update_sched_info(ctx);
-       }
+       ret = spu_acquire(ctx);
+       if (ret)
+               goto out_unlock;
+
+       spu_update_sched_info(ctx);
 
        ret = spu_run_init(ctx, npc);
        if (ret) {
@@ -358,14 +378,12 @@
                if (ret)
                        break;
 
-               if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
-                       ret = spu_reacquire_runnable(ctx, npc, &status);
-                       if (ret)
-                               goto out2;
-                       continue;
-               }
-               ret = spu_process_events(ctx);
+               ret = spufs_handle_class0(ctx);
+               if (ret)
+                       break;
 
+               if (signal_pending(current))
+                       ret = -ERESTARTSYS;
        } while (!ret && !(status & (SPU_STATUS_STOPPED_BY_STOP |
                                      SPU_STATUS_STOPPED_BY_HALT |
                                       SPU_STATUS_SINGLE_STEP)));
@@ -376,11 +394,10 @@
                ctx->stats.libassist++;
 
 
-       ctx->ops->master_stop(ctx);
+       spu_disable_spu(ctx);
        ret = spu_run_fini(ctx, npc, &status);
        spu_yield(ctx);
 
-out2:
        if ((ret == 0) ||
            ((ret == -ERESTARTSYS) &&
             ((status & SPU_STATUS_STOPPED_BY_HALT) ||
@@ -401,6 +418,7 @@
 
 out:
        *event = ctx->event_return;
+out_unlock:
        mutex_unlock(&ctx->run_mutex);
        return ret;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/sched.c powerpc.git/arch/powerpc/platforms/cell/spufs/sched.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/sched.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/sched.c       2008-01-28 20:25:49.000000000 +0100
@@ -58,6 +58,7 @@
 static struct spu_prio_array *spu_prio;
 static struct task_struct *spusched_task;
 static struct timer_list spusched_timer;
+static struct timer_list spuloadavg_timer;
 
 /*
  * Priority of a normal, non-rt, non-niced'd process (aka nice level 0).
@@ -105,15 +106,21 @@
 void __spu_update_sched_info(struct spu_context *ctx)
 {
        /*
-        * 32-Bit assignment are atomic on powerpc, and we don't care about
-        * memory ordering here because retriving the controlling thread is
-        * per defintion racy.
+        * assert that the context is not on the runqueue, so it is safe
+        * to change its scheduling parameters.
+        */
+       BUG_ON(!list_empty(&ctx->rq));
+
+       /*
+        * 32-Bit assignments are atomic on powerpc, and we don't care about
+        * memory ordering here because retrieving the controlling thread is
+        * per definition racy.
         */
        ctx->tid = current->pid;
 
        /*
         * We do our own priority calculations, so we normally want
-        * ->static_prio to start with. Unfortunately thies field
+        * ->static_prio to start with. Unfortunately this field
         * contains junk for threads with a realtime scheduling
         * policy so we have to look at ->prio in this case.
         */
@@ -124,23 +131,32 @@
        ctx->policy = current->policy;
 
        /*
-        * A lot of places that don't hold list_mutex poke into
-        * cpus_allowed, including grab_runnable_context which
-        * already holds the runq_lock.  So abuse runq_lock
-        * to protect this field aswell.
+        * TO DO: the context may be loaded, so we may need to activate
+        * it again on a different node. But it shouldn't hurt anything
+        * to update its parameters, because we know that the scheduler
+        * is not actively looking at this field, since it is not on the
+        * runqueue. The context will be rescheduled on the proper node
+        * if it is timesliced or preempted.
         */
-       spin_lock(&spu_prio->runq_lock);
        ctx->cpus_allowed = current->cpus_allowed;
-       spin_unlock(&spu_prio->runq_lock);
 }
 
 void spu_update_sched_info(struct spu_context *ctx)
 {
-       int node = ctx->spu->node;
+       int node;
 
-       mutex_lock(&cbe_spu_info[node].list_mutex);
-       __spu_update_sched_info(ctx);
-       mutex_unlock(&cbe_spu_info[node].list_mutex);
+       if (ctx->state == SPU_STATE_RUNNABLE) {
+               node = ctx->spu->node;
+
+               /*
+                * Take list_mutex to sync with find_victim().
+                */
+               mutex_lock(&cbe_spu_info[node].list_mutex);
+               __spu_update_sched_info(ctx);
+               mutex_unlock(&cbe_spu_info[node].list_mutex);
+       } else {
+               __spu_update_sched_info(ctx);
+       }
 }
 
 static int __node_allowed(struct spu_context *ctx, int node)
@@ -174,7 +190,7 @@
         * Wake up the active spu_contexts.
         *
         * When the awakened processes see their "notify_active" flag is set,
-        * they will call spu_switch_notify();
+        * they will call spu_switch_notify().
         */
        for_each_online_node(node) {
                struct spu *spu;
@@ -221,7 +237,6 @@
        spu->wbox_callback = spufs_wbox_callback;
        spu->stop_callback = spufs_stop_callback;
        spu->mfc_callback = spufs_mfc_callback;
-       spu->dma_callback = spufs_dma_callback;
        mb();
        spu_unmap_mappings(ctx);
        spu_restore(&ctx->csa, spu);
@@ -409,7 +424,6 @@
        spu->wbox_callback = NULL;
        spu->stop_callback = NULL;
        spu->mfc_callback = NULL;
-       spu->dma_callback = NULL;
        spu_associate_mm(spu, NULL);
        spu->pid = 0;
        spu->tgid = 0;
@@ -454,6 +468,13 @@
        }
 }
 
+static void spu_add_to_rq(struct spu_context *ctx)
+{
+       spin_lock(&spu_prio->runq_lock);
+       __spu_add_to_rq(ctx);
+       spin_unlock(&spu_prio->runq_lock);
+}
+
 static void __spu_del_from_rq(struct spu_context *ctx)
 {
        int prio = ctx->prio;
@@ -468,10 +489,24 @@
        }
 }
 
+void spu_del_from_rq(struct spu_context *ctx)
+{
+       spin_lock(&spu_prio->runq_lock);
+       __spu_del_from_rq(ctx);
+       spin_unlock(&spu_prio->runq_lock);
+}
+
 static void spu_prio_wait(struct spu_context *ctx)
 {
        DEFINE_WAIT(wait);
 
+       /*
+        * The caller must explicitly wait for a context to be loaded
+        * if the nosched flag is set.  If NOSCHED is not set, the caller
+        * queues the context and waits for an spu event or error.
+        */
+       BUG_ON(!(ctx->flags & SPU_CREATE_NOSCHED));
+
        spin_lock(&spu_prio->runq_lock);
        prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE);
        if (!signal_pending(current)) {
@@ -555,7 +590,7 @@
        /*
         * Look for a possible preemption candidate on the local node first.
         * If there is no candidate look at the other nodes.  This isn't
-        * exactly fair, but so far the whole spu schedule tries to keep
+        * exactly fair, but so far the whole spu scheduler tries to keep
         * a strong node affinity.  We might want to fine-tune this in
         * the future.
         */
@@ -571,6 +606,7 @@
                        struct spu_context *tmp = spu->ctx;
 
                        if (tmp && tmp->prio > ctx->prio &&
+                           !(tmp->flags & SPU_CREATE_NOSCHED) &&
                            (!victim || tmp->prio > victim->prio))
                                victim = spu->ctx;
                }
@@ -582,6 +618,10 @@
                         * higher priority contexts before lower priority
                         * ones, so this is safe until we introduce
                         * priority inheritance schemes.
+                        *
+                        * XXX if the highest priority context is locked,
+                        * this can loop a long time.  Might be better to
+                        * look at another context or give up after X retries.
                         */
                        if (!mutex_trylock(&victim->state_mutex)) {
                                victim = NULL;
@@ -589,10 +629,10 @@
                        }
 
                        spu = victim->spu;
-                       if (!spu) {
+                       if (!spu || victim->prio <= ctx->prio) {
                                /*
                                 * This race can happen because we've dropped
-                                * the active list mutex.  No a problem, just
+                                * the active list mutex.  Not a problem, just
                                 * restart the search.
                                 */
                                mutex_unlock(&victim->state_mutex);
@@ -607,13 +647,10 @@
 
                        victim->stats.invol_ctx_switch++;
                        spu->stats.invol_ctx_switch++;
+                       spu_add_to_rq(victim);
+
                        mutex_unlock(&victim->state_mutex);
-                       /*
-                        * We need to break out of the wait loop in spu_run
-                        * manually to ensure this context gets put on the
-                        * runqueue again ASAP.
-                        */
-                       wake_up(&victim->stop_wq);
+
                        return spu;
                }
        }
@@ -621,6 +658,50 @@
        return NULL;
 }
 
+static void __spu_schedule(struct spu *spu, struct spu_context *ctx)
+{
+       int node = spu->node;
+       int success = 0;
+
+       spu_set_timeslice(ctx);
+
+       mutex_lock(&cbe_spu_info[node].list_mutex);
+       if (spu->ctx == NULL) {
+               spu_bind_context(spu, ctx);
+               cbe_spu_info[node].nr_active++;
+               spu->alloc_state = SPU_USED;
+               success = 1;
+       }
+       mutex_unlock(&cbe_spu_info[node].list_mutex);
+
+       if (success)
+               wake_up_all(&ctx->run_wq);
+       else
+               spu_add_to_rq(ctx);
+}
+
+static void spu_schedule(struct spu *spu, struct spu_context *ctx)
+{
+       /* not a candidate for interruptible because it's called either
+          from the scheduler thread or from spu_deactivate */
+       mutex_lock(&ctx->state_mutex);
+       __spu_schedule(spu, ctx);
+       spu_release(ctx);
+}
+
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+{
+       int node = spu->node;
+
+       mutex_lock(&cbe_spu_info[node].list_mutex);
+       cbe_spu_info[node].nr_active--;
+       spu->alloc_state = SPU_FREE;
+       spu_unbind_context(spu, ctx);
+       ctx->stats.invol_ctx_switch++;
+       spu->stats.invol_ctx_switch++;
+       mutex_unlock(&cbe_spu_info[node].list_mutex);
+}
+
 /**
  * spu_activate - find a free spu for a context and execute it
  * @ctx:       spu context to schedule
@@ -632,39 +713,47 @@
  */
 int spu_activate(struct spu_context *ctx, unsigned long flags)
 {
-       do {
-               struct spu *spu;
+       struct spu *spu;
 
-               /*
-                * If there are multiple threads waiting for a single context
-                * only one actually binds the context while the others will
-                * only be able to acquire the state_mutex once the context
-                * already is in runnable state.
-                */
-               if (ctx->spu)
-                       return 0;
+       /*
+        * If there are multiple threads waiting for a single context
+        * only one actually binds the context while the others will
+        * only be able to acquire the state_mutex once the context
+        * already is in runnable state.
+        */
+       if (ctx->spu)
+               return 0;
 
-               spu = spu_get_idle(ctx);
-               /*
-                * If this is a realtime thread we try to get it running by
-                * preempting a lower priority thread.
-                */
-               if (!spu && rt_prio(ctx->prio))
-                       spu = find_victim(ctx);
-               if (spu) {
-                       int node = spu->node;
+spu_activate_top:
+       if (signal_pending(current))
+               return -ERESTARTSYS;
 
-                       mutex_lock(&cbe_spu_info[node].list_mutex);
-                       spu_bind_context(spu, ctx);
-                       cbe_spu_info[node].nr_active++;
-                       mutex_unlock(&cbe_spu_info[node].list_mutex);
-                       return 0;
-               }
+       spu = spu_get_idle(ctx);
+       /*
+        * If this is a realtime thread we try to get it running by
+        * preempting a lower priority thread.
+        */
+       if (!spu && rt_prio(ctx->prio))
+               spu = find_victim(ctx);
+       if (spu) {
+               unsigned long runcntl;
 
+               runcntl = ctx->ops->runcntl_read(ctx);
+               __spu_schedule(spu, ctx);
+               if (runcntl & SPU_RUNCNTL_RUNNABLE)
+                       spuctx_switch_state(ctx, SPU_UTIL_USER);
+
+               return 0;
+       }
+
+       if (ctx->flags & SPU_CREATE_NOSCHED) {
                spu_prio_wait(ctx);
-       } while (!signal_pending(current));
+               goto spu_activate_top;
+       }
+
+       spu_add_to_rq(ctx);
 
-       return -ERESTARTSYS;
+       return 0;
 }
 
 /**
@@ -706,21 +795,19 @@
        if (spu) {
                new = grab_runnable_context(max_prio, spu->node);
                if (new || force) {
-                       int node = spu->node;
-
-                       mutex_lock(&cbe_spu_info[node].list_mutex);
-                       spu_unbind_context(spu, ctx);
-                       spu->alloc_state = SPU_FREE;
-                       cbe_spu_info[node].nr_active--;
-                       mutex_unlock(&cbe_spu_info[node].list_mutex);
-
-                       ctx->stats.vol_ctx_switch++;
-                       spu->stats.vol_ctx_switch++;
-
-                       if (new)
-                               wake_up(&new->stop_wq);
+                       spu_unschedule(spu, ctx);
+                       if (new) {
+                               if (new->flags & SPU_CREATE_NOSCHED)
+                                       wake_up(&new->stop_wq);
+                               else {
+                                       spu_release(ctx);
+                                       spu_schedule(spu, new);
+                                       /* this one can't easily be made
+                                          interruptible */
+                                       mutex_lock(&ctx->state_mutex);
+                               }
+                       }
                }
-
        }
 
        return new != NULL;
@@ -757,43 +844,38 @@
 
 static noinline void spusched_tick(struct spu_context *ctx)
 {
+       struct spu_context *new = NULL;
+       struct spu *spu = NULL;
+       u32 status;
+
+       if (spu_acquire(ctx))
+               BUG();  /* a kernel thread never has signals pending */
+
+       if (ctx->state != SPU_STATE_RUNNABLE)
+               goto out;
+       if (spu_stopped(ctx, &status))
+               goto out;
        if (ctx->flags & SPU_CREATE_NOSCHED)
-               return;
+               goto out;
        if (ctx->policy == SCHED_FIFO)
-               return;
+               goto out;
 
        if (--ctx->time_slice)
-               return;
-
-       /*
-        * Unfortunately list_mutex ranks outside of state_mutex, so
-        * we have to trylock here.  If we fail give the context another
-        * tick and try again.
-        */
-       if (mutex_trylock(&ctx->state_mutex)) {
-               struct spu *spu = ctx->spu;
-               struct spu_context *new;
+               goto out;
 
-               new = grab_runnable_context(ctx->prio + 1, spu->node);
-               if (new) {
-                       spu_unbind_context(spu, ctx);
-                       ctx->stats.invol_ctx_switch++;
-                       spu->stats.invol_ctx_switch++;
-                       spu->alloc_state = SPU_FREE;
-                       cbe_spu_info[spu->node].nr_active--;
-                       wake_up(&new->stop_wq);
-                       /*
-                        * We need to break out of the wait loop in
-                        * spu_run manually to ensure this context
-                        * gets put on the runqueue again ASAP.
-                        */
-                       wake_up(&ctx->stop_wq);
-               }
-               spu_set_timeslice(ctx);
-               mutex_unlock(&ctx->state_mutex);
+       spu = ctx->spu;
+       new = grab_runnable_context(ctx->prio + 1, spu->node);
+       if (new) {
+               spu_unschedule(spu, ctx);
+               spu_add_to_rq(ctx);
        } else {
                ctx->time_slice++;
        }
+out:
+       spu_release(ctx);
+
+       if (new)
+               spu_schedule(spu, new);
 }
 
 /**
@@ -817,35 +899,31 @@
 }
 
 /**
- * spu_calc_load - given tick count, update the avenrun load estimates.
- * @tick:      tick count
+ * spu_calc_load - update the avenrun load estimates.
  *
  * No locking against reading these values from userspace, as for
  * the CPU loadavg code.
  */
-static void spu_calc_load(unsigned long ticks)
+static void spu_calc_load(void)
 {
        unsigned long active_tasks; /* fixed-point */
-       static int count = LOAD_FREQ;
 
-       count -= ticks;
-
-       if (unlikely(count < 0)) {
-               active_tasks = count_active_contexts() * FIXED_1;
-               do {
-                       CALC_LOAD(spu_avenrun[0], EXP_1, active_tasks);
-                       CALC_LOAD(spu_avenrun[1], EXP_5, active_tasks);
-                       CALC_LOAD(spu_avenrun[2], EXP_15, active_tasks);
-                       count += LOAD_FREQ;
-               } while (count < 0);
-       }
+       active_tasks = count_active_contexts() * FIXED_1;
+       CALC_LOAD(spu_avenrun[0], EXP_1, active_tasks);
+       CALC_LOAD(spu_avenrun[1], EXP_5, active_tasks);
+       CALC_LOAD(spu_avenrun[2], EXP_15, active_tasks);
 }
 
 static void spusched_wake(unsigned long data)
 {
        mod_timer(&spusched_timer, jiffies + SPUSCHED_TICK);
        wake_up_process(spusched_task);
-       spu_calc_load(SPUSCHED_TICK);
+}
+
+static void spuloadavg_wake(unsigned long data)
+{
+       mod_timer(&spuloadavg_timer, jiffies + LOAD_FREQ);
+       spu_calc_load();
 }
 
 static int spusched_thread(void *unused)
@@ -857,17 +935,58 @@
                set_current_state(TASK_INTERRUPTIBLE);
                schedule();
                for (node = 0; node < MAX_NUMNODES; node++) {
-                       mutex_lock(&cbe_spu_info[node].list_mutex);
-                       list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list)
-                               if (spu->ctx)
-                                       spusched_tick(spu->ctx);
-                       mutex_unlock(&cbe_spu_info[node].list_mutex);
+                       struct mutex *mtx = &cbe_spu_info[node].list_mutex;
+
+                       mutex_lock(mtx);
+                       list_for_each_entry(spu, &cbe_spu_info[node].spus,
+                                       cbe_list) {
+                               struct spu_context *ctx = spu->ctx;
+
+                               if (ctx) {
+                                       mutex_unlock(mtx);
+                                       spusched_tick(ctx);
+                                       mutex_lock(mtx);
+                               }
+                       }
+                       mutex_unlock(mtx);
                }
        }
 
        return 0;
 }
 
+void spuctx_switch_state(struct spu_context *ctx,
+               enum spu_utilization_state new_state)
+{
+       unsigned long long curtime;
+       signed long long delta;
+       struct timespec ts;
+       struct spu *spu;
+       enum spu_utilization_state old_state;
+
+       ktime_get_ts(&ts);
+       curtime = timespec_to_ns(&ts);
+       delta = curtime - ctx->stats.tstamp;
+
+       WARN_ON(!mutex_is_locked(&ctx->state_mutex));
+       WARN_ON(delta < 0);
+
+       spu = ctx->spu;
+       old_state = ctx->stats.util_state;
+       ctx->stats.util_state = new_state;
+       ctx->stats.tstamp = curtime;
+
+       /*
+        * Update the physical SPU utilization statistics.
+        */
+       if (spu) {
+               ctx->stats.times[old_state] += delta;
+               spu->stats.times[old_state] += delta;
+               spu->stats.util_state = new_state;
+               spu->stats.tstamp = curtime;
+       }
+}
+
 #define LOAD_INT(x) ((x) >> FSHIFT)
 #define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100)
 
@@ -881,7 +1000,7 @@
 
        /*
         * Note that last_pid doesn't really make much sense for the
-        * SPU loadavg (it even seems very odd on the CPU side..),
+        * SPU loadavg (it even seems very odd on the CPU side...),
         * but we include it here to have a 100% compatible interface.
         */
        seq_printf(s, "%d.%02d %d.%02d %d.%02d %ld/%d %d\n",
@@ -922,6 +1041,7 @@
        spin_lock_init(&spu_prio->runq_lock);
 
        setup_timer(&spusched_timer, spusched_wake, 0);
+       setup_timer(&spuloadavg_timer, spuloadavg_wake, 0);
 
        spusched_task = kthread_run(spusched_thread, NULL, "spusched");
        if (IS_ERR(spusched_task)) {
@@ -929,6 +1049,8 @@
                goto out_free_spu_prio;
        }
 
+       mod_timer(&spuloadavg_timer, 0);
+
        entry = create_proc_entry("spu_loadavg", 0, NULL);
        if (!entry)
                goto out_stop_kthread;
@@ -954,6 +1076,7 @@
        remove_proc_entry("spu_loadavg", NULL);
 
        del_timer_sync(&spusched_timer);
+       del_timer_sync(&spuloadavg_timer);
        kthread_stop(spusched_task);
 
        for (node = 0; node < MAX_NUMNODES; node++) {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/spufs.h powerpc.git/arch/powerpc/platforms/cell/spufs/spufs.h
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/spufs.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/spufs.h       2008-01-28 20:25:49.000000000 +0100
@@ -71,6 +71,7 @@
        wait_queue_head_t wbox_wq;
        wait_queue_head_t stop_wq;
        wait_queue_head_t mfc_wq;
+       wait_queue_head_t run_wq;
        struct fasync_struct *ibox_fasync;
        struct fasync_struct *wbox_fasync;
        struct fasync_struct *mfc_fasync;
@@ -168,8 +169,10 @@
        void (*npc_write) (struct spu_context * ctx, u32 data);
         u32(*status_read) (struct spu_context * ctx);
        char*(*get_ls) (struct spu_context * ctx);
+       void (*privcntl_write) (struct spu_context *ctx, u64 data);
         u32 (*runcntl_read) (struct spu_context * ctx);
        void (*runcntl_write) (struct spu_context * ctx, u32 data);
+       void (*runcntl_stop) (struct spu_context * ctx);
        void (*master_start) (struct spu_context * ctx);
        void (*master_stop) (struct spu_context * ctx);
        int (*set_mfc_query)(struct spu_context * ctx, u32 mask, u32 mode);
@@ -219,15 +222,16 @@
 
 /* fault handling */
 int spufs_handle_class1(struct spu_context *ctx);
+int spufs_handle_class0(struct spu_context *ctx);
 
 /* affinity */
 struct spu *affinity_check(struct spu_context *ctx);
 
 /* context management */
 extern atomic_t nr_spu_contexts;
-static inline void spu_acquire(struct spu_context *ctx)
+static inline int __must_check spu_acquire(struct spu_context *ctx)
 {
-       mutex_lock(&ctx->state_mutex);
+       return mutex_lock_interruptible(&ctx->state_mutex);
 }
 
 static inline void spu_release(struct spu_context *ctx)
@@ -242,10 +246,11 @@
 void spu_unmap_mappings(struct spu_context *ctx);
 
 void spu_forget(struct spu_context *ctx);
-int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags);
-void spu_acquire_saved(struct spu_context *ctx);
+int __must_check spu_acquire_saved(struct spu_context *ctx);
 void spu_release_saved(struct spu_context *ctx);
 
+int spu_stopped(struct spu_context *ctx, u32 * stat);
+void spu_del_from_rq(struct spu_context *ctx);
 int spu_activate(struct spu_context *ctx, unsigned long flags);
 void spu_deactivate(struct spu_context *ctx);
 void spu_yield(struct spu_context *ctx);
@@ -279,7 +284,9 @@
                }                                                       \
                spu_release(ctx);                                       \
                schedule();                                             \
-               spu_acquire(ctx);                                       \
+               __ret = spu_acquire(ctx);                               \
+               if (__ret)                                              \
+                       break;                                          \
        }                                                               \
        finish_wait(&(wq), &__wait);                                    \
        __ret;                                                          \
@@ -306,41 +313,16 @@
 extern struct spufs_coredump_reader spufs_coredump_read[];
 extern int spufs_coredump_num_notes;
 
-/*
- * This function is a little bit too large for an inline, but
- * as fault.c is built into the kernel we can't move it out of
- * line.
- */
-static inline void spuctx_switch_state(struct spu_context *ctx,
-               enum spu_utilization_state new_state)
-{
-       unsigned long long curtime;
-       signed long long delta;
-       struct timespec ts;
-       struct spu *spu;
-       enum spu_utilization_state old_state;
-
-       ktime_get_ts(&ts);
-       curtime = timespec_to_ns(&ts);
-       delta = curtime - ctx->stats.tstamp;
-
-       WARN_ON(!mutex_is_locked(&ctx->state_mutex));
-       WARN_ON(delta < 0);
-
-       spu = ctx->spu;
-       old_state = ctx->stats.util_state;
-       ctx->stats.util_state = new_state;
-       ctx->stats.tstamp = curtime;
-
-       /*
-        * Update the physical SPU utilization statistics.
-        */
-       if (spu) {
-               ctx->stats.times[old_state] += delta;
-               spu->stats.times[old_state] += delta;
-               spu->stats.util_state = new_state;
-               spu->stats.tstamp = curtime;
-       }
-}
+extern int spu_init_csa(struct spu_state *csa);
+extern void spu_fini_csa(struct spu_state *csa);
+extern int spu_save(struct spu_state *prev, struct spu *spu);
+extern int spu_restore(struct spu_state *new, struct spu *spu);
+extern int spu_switch(struct spu_state *prev, struct spu_state *new,
+                     struct spu *spu);
+extern int spu_alloc_lscsa(struct spu_state *csa);
+extern void spu_free_lscsa(struct spu_state *csa);
+
+extern void spuctx_switch_state(struct spu_context *ctx,
+               enum spu_utilization_state new_state);
 
 #endif
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/cell/spufs/switch.c powerpc.git/arch/powerpc/platforms/cell/spufs/switch.c
--- linux-2.6.24/arch/powerpc/platforms/cell/spufs/switch.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/cell/spufs/switch.c      2008-01-28 20:25:49.000000000 +0100
@@ -48,6 +48,8 @@
 #include <asm/spu_csa.h>
 #include <asm/mmu_context.h>
 
+#include "spufs.h"
+
 #include "spu_save_dump.h"
 #include "spu_restore_dump.h"
 
@@ -691,35 +693,9 @@
        out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
 }
 
-static inline void get_kernel_slb(u64 ea, u64 slb[2])
+static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu,
+               unsigned int *code, int code_size)
 {
-       u64 llp;
-
-       if (REGION_ID(ea) == KERNEL_REGION_ID)
-               llp = mmu_psize_defs[mmu_linear_psize].sllp;
-       else
-               llp = mmu_psize_defs[mmu_virtual_psize].sllp;
-       slb[0] = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
-               SLB_VSID_KERNEL | llp;
-       slb[1] = (ea & ESID_MASK) | SLB_ESID_V;
-}
-
-static inline void load_mfc_slb(struct spu *spu, u64 slb[2], int slbe)
-{
-       struct spu_priv2 __iomem *priv2 = spu->priv2;
-
-       out_be64(&priv2->slb_index_W, slbe);
-       eieio();
-       out_be64(&priv2->slb_vsid_RW, slb[0]);
-       out_be64(&priv2->slb_esid_RW, slb[1]);
-       eieio();
-}
-
-static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu)
-{
-       u64 code_slb[2];
-       u64 lscsa_slb[2];
-
        /* Save, Step 47:
         * Restore, Step 30.
         *     If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All
@@ -735,11 +711,7 @@
         *     translation is desired by OS environment).
         */
        spu_invalidate_slbs(spu);
-       get_kernel_slb((unsigned long)&spu_save_code[0], code_slb);
-       get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb);
-       load_mfc_slb(spu, code_slb, 0);
-       if ((lscsa_slb[0] != code_slb[0]) || (lscsa_slb[1] != code_slb[1]))
-               load_mfc_slb(spu, lscsa_slb, 1);
+       spu_setup_kernel_slbs(spu, csa->lscsa, code, code_size);
 }
 
 static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
@@ -768,9 +740,9 @@
         *     (translation) interrupts.
         */
        spin_lock_irq(&spu->register_lock);
-       spu_int_stat_clear(spu, 0, ~0ul);
-       spu_int_stat_clear(spu, 1, ~0ul);
-       spu_int_stat_clear(spu, 2, ~0ul);
+       spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
+       spu_int_stat_clear(spu, 1, CLASS1_INTR_MASK);
+       spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
        spu_int_mask_set(spu, 0, 0ul);
        spu_int_mask_set(spu, 1, class1_mask);
        spu_int_mask_set(spu, 2, 0ul);
@@ -927,8 +899,8 @@
        POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask);
 
        local_irq_save(flags);
-       spu_int_stat_clear(spu, 0, ~(0ul));
-       spu_int_stat_clear(spu, 2, ~(0ul));
+       spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
+       spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
        local_irq_restore(flags);
 }
 
@@ -946,8 +918,8 @@
        POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
 
        local_irq_save(flags);
-       spu_int_stat_clear(spu, 0, ~(0ul));
-       spu_int_stat_clear(spu, 2, ~(0ul));
+       spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
+       spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
        local_irq_restore(flags);
 }
 
@@ -1423,9 +1395,9 @@
        spu_int_mask_set(spu, 0, 0ul);
        spu_int_mask_set(spu, 1, 0ul);
        spu_int_mask_set(spu, 2, 0ul);
-       spu_int_stat_clear(spu, 0, ~0ul);
-       spu_int_stat_clear(spu, 1, ~0ul);
-       spu_int_stat_clear(spu, 2, ~0ul);
+       spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
+       spu_int_stat_clear(spu, 1, CLASS1_INTR_MASK);
+       spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
        spin_unlock_irq(&spu->register_lock);
 }
 
@@ -1866,7 +1838,8 @@
         */
 
        resume_mfc_queue(prev, spu);    /* Step 46. */
-       setup_mfc_slbs(prev, spu);      /* Step 47. */
+       /* Step 47. */
+       setup_mfc_slbs(prev, spu, spu_save_code, sizeof(spu_save_code));
        set_switch_active(prev, spu);   /* Step 48. */
        enable_interrupts(prev, spu);   /* Step 49. */
        save_ls_16kb(prev, spu);        /* Step 50. */
@@ -1971,7 +1944,8 @@
        setup_spu_status_part1(next, spu);      /* Step 27. */
        setup_spu_status_part2(next, spu);      /* Step 28. */
        restore_mfc_rag(next, spu);             /* Step 29. */
-       setup_mfc_slbs(next, spu);              /* Step 30. */
+       /* Step 30. */
+       setup_mfc_slbs(next, spu, spu_restore_code, sizeof(spu_restore_code));
        set_spu_npc(next, spu);                 /* Step 31. */
        set_signot1(next, spu);                 /* Step 32. */
        set_signot2(next, spu);                 /* Step 33. */
@@ -2103,10 +2077,6 @@
        int rc;
 
        acquire_spu_lock(spu);          /* Step 1.     */
-       prev->dar = spu->dar;
-       prev->dsisr = spu->dsisr;
-       spu->dar = 0;
-       spu->dsisr = 0;
        rc = __do_spu_save(prev, spu);  /* Steps 2-53. */
        release_spu_lock(spu);
        if (rc != 0 && rc != 2 && rc != 6) {
@@ -2133,9 +2103,6 @@
        acquire_spu_lock(spu);
        harvest(NULL, spu);
        spu->slb_replace = 0;
-       new->dar = 0;
-       new->dsisr = 0;
-       spu->class_0_pending = 0;
        rc = __do_spu_restore(new, spu);
        release_spu_lock(spu);
        if (rc) {
@@ -2215,10 +2182,8 @@
 
        return 0;
 }
-EXPORT_SYMBOL_GPL(spu_init_csa);
 
 void spu_fini_csa(struct spu_state *csa)
 {
        spu_free_lscsa(csa);
 }
-EXPORT_SYMBOL_GPL(spu_fini_csa);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/celleb/Kconfig powerpc.git/arch/powerpc/platforms/celleb/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/celleb/Kconfig  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/celleb/Kconfig   2008-01-28 20:25:49.000000000 +0100
@@ -2,6 +2,8 @@
        bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
        depends on PPC_MULTIPLATFORM && PPC64
        select PPC_CELL
+       select PPC_CELL_NATIVE
+       select PPC_RTAS
        select PPC_INDIRECT_IO
        select PPC_OF_PLATFORM_PCI
        select HAS_TXX9_SERIAL
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/celleb/io-workarounds.c powerpc.git/arch/powerpc/platforms/celleb/io-workarounds.c
--- linux-2.6.24/arch/powerpc/platforms/celleb/io-workarounds.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/celleb/io-workarounds.c  2008-01-28 20:25:49.000000000 +0100
@@ -22,6 +22,7 @@
 
 #undef DEBUG
 
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/irq.h>
 
@@ -222,7 +223,7 @@
                               void (*dummy_read)(struct pci_controller *))
 {
        struct celleb_pci_bus *bus = &celleb_pci_busses[celleb_pci_count];
-       struct device_node *np = phb->arch_data;
+       struct device_node *np = phb->dn;
 
        if (celleb_pci_count >= MAX_CELLEB_PCI_BUS) {
                printk(KERN_ERR "Too many pci bridges, workarounds"
@@ -256,13 +257,13 @@
 
        celleb_dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL);
        if (!celleb_dummy_page_va) {
-               printk(KERN_ERR "Celleb: dummy read disabled."
+               printk(KERN_ERR "Celleb: dummy read disabled. "
                        "Alloc celleb_dummy_page_va failed\n");
                return 1;
        }
 
        list_for_each_entry(phb, &hose_list, list_node) {
-               node = phb->arch_data;
+               node = phb->dn;
                match = of_match_node(celleb_pci_workaround_match, node);
 
                if (match) {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/celleb/iommu.c powerpc.git/arch/powerpc/platforms/celleb/iommu.c
--- linux-2.6.24/arch/powerpc/platforms/celleb/iommu.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/celleb/iommu.c   2008-01-28 20:25:49.000000000 +0100
@@ -22,8 +22,9 @@
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
+#include <linux/of_platform.h>
 
-#include <asm/of_platform.h>
+#include <asm/machdep.h>
 
 #include "beat_wrapper.h"
 
@@ -51,6 +52,8 @@
        return 0;
 }
 
+static unsigned long celleb_dma_direct_offset;
+
 static void __init celleb_init_direct_mapping(void)
 {
        u64 lpar_addr, io_addr;
@@ -68,7 +71,18 @@
                                     ioid, DMA_FLAGS);
        }
 
-       dma_direct_offset = dma_base;
+       celleb_dma_direct_offset = dma_base;
+}
+
+static void celleb_dma_dev_setup(struct device *dev)
+{
+       dev->archdata.dma_ops = get_pci_dma_ops();
+       dev->archdata.dma_data = (void *)celleb_dma_direct_offset;
+}
+
+static void celleb_pci_dma_dev_setup(struct pci_dev *pdev)
+{
+       celleb_dma_dev_setup(&pdev->dev);
 }
 
 static int celleb_of_bus_notify(struct notifier_block *nb,
@@ -80,7 +94,7 @@
        if (action != BUS_NOTIFY_ADD_DEVICE)
                return 0;
 
-       dev->archdata.dma_ops = get_pci_dma_ops();
+       celleb_dma_dev_setup(dev);
 
        return 0;
 }
@@ -91,14 +105,12 @@
 
 static int __init celleb_init_iommu(void)
 {
-       if (!machine_is(celleb))
-               return -ENODEV;
-
        celleb_init_direct_mapping();
        set_pci_dma_ops(&dma_direct_ops);
+       ppc_md.pci_dma_dev_setup = celleb_pci_dma_dev_setup;
        bus_register_notifier(&of_platform_bus_type, &celleb_of_bus_notifier);
 
        return 0;
 }
 
-arch_initcall(celleb_init_iommu);
+machine_arch_initcall(celleb_beat, celleb_init_iommu);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/celleb/pci.c powerpc.git/arch/powerpc/platforms/celleb/pci.c
--- linux-2.6.24/arch/powerpc/platforms/celleb/pci.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/celleb/pci.c     2008-01-28 20:25:49.000000000 +0100
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/pci_regs.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 
 #include <asm/io.h>
@@ -138,8 +139,6 @@
                *val = celleb_fake_config_readl(p);
                break;
        }
-
-       return;
 }
 
 static void celleb_config_write_fake(unsigned char *config, int where,
@@ -158,7 +157,6 @@
                celleb_fake_config_writel(val, p);
                break;
        }
-       return;
 }
 
 static int celleb_fake_pci_read_config(struct pci_bus *bus,
@@ -351,6 +349,10 @@
        wi1 = of_get_property(node, "vendor-id", NULL);
        wi2 = of_get_property(node, "class-code", NULL);
        wi3 = of_get_property(node, "revision-id", NULL);
+       if (!wi0 || !wi1 || !wi2 || !wi3) {
+               printk(KERN_ERR "PCI: Missing device tree properties.\n");
+               goto error;
+       }
 
        celleb_config_write_fake(*config, PCI_DEVICE_ID, 2, wi0[0] & 0xffff);
        celleb_config_write_fake(*config, PCI_VENDOR_ID, 2, wi1[0] & 0xffff);
@@ -372,6 +374,10 @@
        celleb_setup_pci_base_addrs(hose, devno, fn, num_base_addr);
 
        li = of_get_property(node, "interrupts", &rlen);
+       if (!li) {
+               printk(KERN_ERR "PCI: interrupts not found.\n");
+               goto error;
+       }
        val = li[0];
        celleb_config_write_fake(*config, PCI_INTERRUPT_PIN, 1, 1);
        celleb_config_write_fake(*config, PCI_INTERRUPT_LINE, 1, val);
@@ -475,7 +481,7 @@
 
 int __init celleb_setup_phb(struct pci_controller *phb)
 {
-       struct device_node *dev = phb->arch_data;
+       struct device_node *dev = phb->dn;
        const struct of_device_id *match;
        int (*setup_func)(struct device_node *, struct pci_controller *);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/celleb/scc_epci.c powerpc.git/arch/powerpc/platforms/celleb/scc_epci.c
--- linux-2.6.24/arch/powerpc/platforms/celleb/scc_epci.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/celleb/scc_epci.c        2008-01-28 20:25:49.000000000 +0100
@@ -95,7 +95,7 @@
        private->dummy_page_da = dma_map_single(hose->parent,
                celleb_dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE);
        if (private->dummy_page_da == DMA_ERROR_CODE) {
-               printk(KERN_ERR "EPCI: dummy read disabled."
+               printk(KERN_ERR "EPCI: dummy read disabled. "
                       "Map dummy page failed.\n");
                return;
        }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/celleb/scc_uhc.c powerpc.git/arch/powerpc/platforms/celleb/scc_uhc.c
--- linux-2.6.24/arch/powerpc/platforms/celleb/scc_uhc.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/celleb/scc_uhc.c 2008-01-28 20:25:49.000000000 +0100
@@ -47,7 +47,8 @@
        u32 val = 0;
        int i;
 
-       if (!machine_is(celleb))
+       if (!machine_is(celleb_beat) &&
+           !machine_is(celleb_native))
                return;
 
        uhc_base = ioremap(pci_resource_start(dev, 0),
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/celleb/setup.c powerpc.git/arch/powerpc/platforms/celleb/setup.c
--- linux-2.6.24/arch/powerpc/platforms/celleb/setup.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/celleb/setup.c   2008-01-28 20:25:49.000000000 +0100
@@ -40,6 +40,7 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/console.h>
+#include <linux/of_platform.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -52,12 +53,16 @@
 #include <asm/time.h>
 #include <asm/spu_priv1.h>
 #include <asm/firmware.h>
-#include <asm/of_platform.h>
+#include <asm/rtas.h>
+#include <asm/cell-regs.h>
 
 #include "interrupt.h"
 #include "beat_wrapper.h"
 #include "beat.h"
 #include "pci.h"
+#include "../cell/interrupt.h"
+#include "../cell/pervasive.h"
+#include "../cell/ras.h"
 
 static char celleb_machine_type[128] = "Celleb";
 
@@ -88,61 +93,122 @@
        printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
-static void __init celleb_setup_arch(void)
+static void __init celleb_setup_arch_common(void)
+{
+       /* init to some ~sane value until calibrate_delay() runs */
+       loops_per_jiffy = 50000000;
+
+#ifdef CONFIG_DUMMY_CONSOLE
+       conswitchp = &dummy_con;
+#endif
+}
+
+static struct of_device_id celleb_bus_ids[] __initdata = {
+       { .type = "scc", },
+       { .type = "ioif", },    /* old style */
+       {},
+};
+
+static int __init celleb_publish_devices(void)
+{
+       /* Publish OF platform devices for southbridge IOs */
+       of_platform_bus_probe(NULL, celleb_bus_ids, NULL);
+
+       celleb_pci_workaround_init();
+
+       return 0;
+}
+machine_device_initcall(celleb_beat, celleb_publish_devices);
+machine_device_initcall(celleb_native, celleb_publish_devices);
+
+
+/*
+ * functions for Celleb-Beat
+ */
+static void __init celleb_setup_arch_beat(void)
 {
 #ifdef CONFIG_SPU_BASE
-       spu_priv1_ops = &spu_priv1_beat_ops;
-       spu_management_ops = &spu_management_of_ops;
+       spu_priv1_ops           = &spu_priv1_beat_ops;
+       spu_management_ops      = &spu_management_of_ops;
 #endif
 
 #ifdef CONFIG_SMP
        smp_init_celleb();
 #endif
 
-       /* init to some ~sane value until calibrate_delay() runs */
-       loops_per_jiffy = 50000000;
-
-#ifdef CONFIG_DUMMY_CONSOLE
-       conswitchp = &dummy_con;
-#endif
+       celleb_setup_arch_common();
 }
 
-static int __init celleb_probe(void)
+static int __init celleb_probe_beat(void)
 {
        unsigned long root = of_get_flat_dt_root();
 
        if (!of_flat_dt_is_compatible(root, "Beat"))
                return 0;
 
-       powerpc_firmware_features |= FW_FEATURE_CELLEB_POSSIBLE;
+       powerpc_firmware_features |= FW_FEATURE_CELLEB_ALWAYS
+               | FW_FEATURE_BEAT | FW_FEATURE_LPAR;
        hpte_init_beat_v3();
+
        return 1;
 }
 
-static struct of_device_id celleb_bus_ids[] __initdata = {
-       { .type = "scc", },
-       { .type = "ioif", },    /* old style */
-       {},
-};
 
-static int __init celleb_publish_devices(void)
+/*
+ * functions for Celleb-native
+ */
+static void __init celleb_init_IRQ_native(void)
 {
-       if (!machine_is(celleb))
-               return 0;
+       iic_init_IRQ();
+       spider_init_IRQ();
+}
 
-       /* Publish OF platform devices for southbridge IOs */
-       of_platform_bus_probe(NULL, celleb_bus_ids, NULL);
+static void __init celleb_setup_arch_native(void)
+{
+#ifdef CONFIG_SPU_BASE
+       spu_priv1_ops           = &spu_priv1_mmio_ops;
+       spu_management_ops      = &spu_management_of_ops;
+#endif
 
-       celleb_pci_workaround_init();
+       cbe_regs_init();
 
-       return 0;
+#ifdef CONFIG_CBE_RAS
+       cbe_ras_init();
+#endif
+
+#ifdef CONFIG_SMP
+       smp_init_cell();
+#endif
+
+       cbe_pervasive_init();
+
+       /* XXX: nvram initialization should be added */
+
+       celleb_setup_arch_common();
+}
+
+static int __init celleb_probe_native(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (of_flat_dt_is_compatible(root, "Beat") ||
+           !of_flat_dt_is_compatible(root, "TOSHIBA,Celleb"))
+               return 0;
+
+       powerpc_firmware_features |= FW_FEATURE_CELLEB_ALWAYS;
+       hpte_init_native();
+
+       return 1;
 }
-device_initcall(celleb_publish_devices);
 
-define_machine(celleb) {
-       .name                   = "Cell Reference Set",
-       .probe                  = celleb_probe,
-       .setup_arch             = celleb_setup_arch,
+
+/*
+ * machine definitions
+ */
+define_machine(celleb_beat) {
+       .name                   = "Cell Reference Set (Beat)",
+       .probe                  = celleb_probe_beat,
+       .setup_arch             = celleb_setup_arch_beat,
        .show_cpuinfo           = celleb_show_cpuinfo,
        .restart                = beat_restart,
        .power_off              = beat_power_off,
@@ -167,3 +233,26 @@
        .machine_crash_shutdown = default_machine_crash_shutdown,
 #endif
 };
+
+define_machine(celleb_native) {
+       .name                   = "Cell Reference Set (native)",
+       .probe                  = celleb_probe_native,
+       .setup_arch             = celleb_setup_arch_native,
+       .show_cpuinfo           = celleb_show_cpuinfo,
+       .restart                = rtas_restart,
+       .power_off              = rtas_power_off,
+       .halt                   = rtas_halt,
+       .get_boot_time          = rtas_get_boot_time,
+       .get_rtc_time           = rtas_get_rtc_time,
+       .set_rtc_time           = rtas_set_rtc_time,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = celleb_progress,
+       .pci_probe_mode         = celleb_pci_probe_mode,
+       .pci_setup_phb          = celleb_setup_phb,
+       .init_IRQ               = celleb_init_IRQ_native,
+#ifdef CONFIG_KEXEC
+       .machine_kexec          = default_machine_kexec,
+       .machine_kexec_prepare  = default_machine_kexec_prepare,
+       .machine_crash_shutdown = default_machine_crash_shutdown,
+#endif
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/chrp/pci.c powerpc.git/arch/powerpc/platforms/chrp/pci.c
--- linux-2.6.24/arch/powerpc/platforms/chrp/pci.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/chrp/pci.c       2008-01-28 20:25:49.000000000 +0100
@@ -198,7 +198,7 @@
                printk ("RTAS supporting Pegasos OF not found, please upgrade"
                        " your firmware\n");
        }
-       pci_assign_all_buses = 1;
+       ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
        /* keep the reference to the root node */
 }
 
@@ -354,7 +354,7 @@
  * mode as well. The same fixup must be done to the class-code property in
  * the IDE node /pci@80000000/ide@C,1
  */
-static void __devinit chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
+static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
 {
        u8 progif;
        struct pci_dev *viaisa;
@@ -375,4 +375,4 @@
 
        pci_dev_put(viaisa);
 }
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/chrp/setup.c powerpc.git/arch/powerpc/platforms/chrp/setup.c
--- linux-2.6.24/arch/powerpc/platforms/chrp/setup.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/chrp/setup.c     2008-01-28 20:25:49.000000000 +0100
@@ -115,7 +115,7 @@
        seq_printf(m, "machine\t\t: CHRP %s\n", model);
 
        /* longtrail (goldengate) stuff */
-       if (!strncmp(model, "IBM,LongTrail", 13)) {
+       if (model && !strncmp(model, "IBM,LongTrail", 13)) {
                /* VLSI VAS96011/12 `Golden Gate 2' */
                /* Memory banks */
                sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
@@ -203,15 +203,20 @@
 static void __init sio_init(void)
 {
        struct device_node *root;
+       const char *model;
 
-       if ((root = of_find_node_by_path("/")) &&
-           !strncmp(of_get_property(root, "model", NULL),
-                       "IBM,LongTrail", 13)) {
+       root = of_find_node_by_path("/");
+       if (!root)
+               return;
+
+       model = of_get_property(root, "model", NULL);
+       if (model && !strncmp(model, "IBM,LongTrail", 13)) {
                /* logical device 0 (KBC/Keyboard) */
                sio_fixup_irq("keyboard", 0, 1, 2);
                /* select logical device 1 (KBC/Mouse) */
                sio_fixup_irq("mouse", 1, 12, 2);
        }
+
        of_node_put(root);
 }
 
@@ -251,6 +256,57 @@
        for(;;);
 }
 
+/*
+ * Per default, input/output-device points to the keyboard/screen
+ * If no card is installed, the built-in serial port is used as a fallback.
+ * But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
+ * the the built-in serial node. Instead, a /failsafe node is created.
+ */
+static void chrp_init_early(void)
+{
+       struct device_node *node;
+       const char *property;
+
+       if (strstr(cmd_line, "console="))
+               return;
+       /* find the boot console from /chosen/stdout */
+       if (!of_chosen)
+               return;
+       node = of_find_node_by_path("/");
+       if (!node)
+               return;
+       property = of_get_property(node, "model", NULL);
+       if (!property)
+               goto out_put;
+       if (strcmp(property, "Pegasos2"))
+               goto out_put;
+       /* this is a Pegasos2 */
+       property = of_get_property(of_chosen, "linux,stdout-path", NULL);
+       if (!property)
+               goto out_put;
+       of_node_put(node);
+       node = of_find_node_by_path(property);
+       if (!node)
+               return;
+       property = of_get_property(node, "device_type", NULL);
+       if (!property)
+               goto out_put;
+       if (strcmp(property, "serial"))
+               goto out_put;
+       /*
+        * The 9pin connector is either /failsafe
+        * or /pci@80000000/isa@C/serial@i2F8
+        * The optional graphics card has also type 'serial' in VGA mode.
+        */
+       property = of_get_property(node, "name", NULL);
+       if (!property)
+               goto out_put;
+       if (!strcmp(property, "failsafe") || !strcmp(property, "serial"))
+               add_preferred_console("ttyS", 0, NULL);
+out_put:
+       of_node_put(node);
+}
+
 void __init chrp_setup_arch(void)
 {
        struct device_node *root = of_find_node_by_path("/");
@@ -594,6 +650,7 @@
        .probe                  = chrp_probe,
        .setup_arch             = chrp_setup_arch,
        .init                   = chrp_init2,
+       .init_early             = chrp_init_early,
        .show_cpuinfo           = chrp_show_cpuinfo,
        .init_IRQ               = chrp_init_IRQ,
        .restart                = rtas_restart,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/embedded6xx/Kconfig powerpc.git/arch/powerpc/platforms/embedded6xx/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/embedded6xx/Kconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/embedded6xx/Kconfig      2008-01-28 20:25:49.000000000 +0100
@@ -9,6 +9,8 @@
        select FSL_SOC
        select PPC_UDBG_16550 if SERIAL_8250
        select DEFAULT_UIMAGE
+       select MPC10X_OPENPIC
+       select MPC10X_BRIDGE
        help
          Select LINKSTATION if configuring for one of PPC- (MPC8241)
          based NAS systems from Buffalo Technology. So far only
@@ -16,6 +18,19 @@
          Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
          Terastation systems should be supported too.
 
+config STORCENTER
+       bool "IOMEGA StorCenter"
+       depends on EMBEDDED6xx
+       select MPIC
+       select FSL_SOC
+       select PPC_UDBG_16550 if SERIAL_8250
+       select WANT_DEVICE_TREE
+       select MPC10X_OPENPIC
+       select MPC10X_BRIDGE
+       help
+         Select STORCENTER if configuring for the iomega StorCenter
+         with an 8241 CPU in it.
+
 config MPC7448HPC2
        bool "Freescale MPC7448HPC2(Taiga)"
        depends on EMBEDDED6xx
@@ -23,6 +38,7 @@
        select DEFAULT_UIMAGE
        select PPC_UDBG_16550
        select WANT_DEVICE_TREE
+       select TSI108_BRIDGE
        help
          Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
          platform
@@ -33,6 +49,7 @@
        select TSI108_BRIDGE
        select PPC_UDBG_16550
        select WANT_DEVICE_TREE
+       select TSI108_BRIDGE
        help
          Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
          Board with TSI108/9 bridge (Hickory/Holly)
@@ -48,17 +65,13 @@
 
 config TSI108_BRIDGE
        bool
-       depends on MPC7448HPC2 || PPC_HOLLY
        select PCI
        select MPIC
        select MPIC_WEIRD
-       default y
 
 config MPC10X_BRIDGE
        bool
-       depends on LINKSTATION
        select PPC_INDIRECT_PCI
-       default y
 
 config MV64X60
        bool
@@ -67,8 +80,6 @@
 
 config MPC10X_OPENPIC
        bool
-       depends on LINKSTATION
-       default y
 
 config MPC10X_STORE_GATHERING
        bool "Enable MPC10x store gathering"
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/embedded6xx/Makefile powerpc.git/arch/powerpc/platforms/embedded6xx/Makefile
--- linux-2.6.24/arch/powerpc/platforms/embedded6xx/Makefile    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/embedded6xx/Makefile     2008-01-28 20:25:49.000000000 +0100
@@ -3,5 +3,6 @@
 #
 obj-$(CONFIG_MPC7448HPC2)      += mpc7448_hpc2.o
 obj-$(CONFIG_LINKSTATION)      += linkstation.o ls_uart.o
+obj-$(CONFIG_STORCENTER)       += storcenter.o
 obj-$(CONFIG_PPC_HOLLY)                += holly.o
 obj-$(CONFIG_PPC_PRPMC2800)    += prpmc2800.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/embedded6xx/holly.c powerpc.git/arch/powerpc/platforms/embedded6xx/holly.c
--- linux-2.6.24/arch/powerpc/platforms/embedded6xx/holly.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/embedded6xx/holly.c      2008-01-28 20:25:49.000000000 +0100
@@ -20,12 +20,12 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -39,7 +39,6 @@
 #include <asm/tsi108_irq.h>
 #include <asm/tsi108_pci.h>
 #include <asm/mpic.h>
-#include <asm/of_platform.h>
 
 #undef DEBUG
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c powerpc.git/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
--- linux-2.6.24/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c       2008-01-28 20:25:49.000000000 +0100
@@ -53,8 +53,6 @@
 
 #define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
 
-extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
 int mpc7448_hpc2_exclude_device(struct pci_controller *hose,
                                u_char bus, u_char devfn)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/embedded6xx/storcenter.c powerpc.git/arch/powerpc/platforms/embedded6xx/storcenter.c
--- linux-2.6.24/arch/powerpc/platforms/embedded6xx/storcenter.c        1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/embedded6xx/storcenter.c 2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,192 @@
+/*
+ * Board setup routines for the storcenter
+ *
+ * Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org)
+ * Copyright 2007 Andy Wilcox, Jon Loeliger
+ *
+ * Based on linkstation.c by G. Liakhovetski
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/initrd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/mpic.h>
+#include <asm/pci-bridge.h>
+
+#include "mpc10x.h"
+
+
+#ifdef CONFIG_MTD_PHYSMAP
+static struct mtd_partition storcenter_physmap_partitions[] = {
+       {
+               .name   = "kernel",
+               .offset = 0x000000,
+               .size   = 0x170000,
+       },
+       {
+               .name   = "rootfs",
+               .offset = 0x170000,
+               .size   = 0x590000,
+       },
+       {
+               .name   = "uboot",
+               .offset = 0x700000,
+               .size   = 0x040000,
+       },
+       {
+               .name   = "config",
+               .offset = 0x740000,
+               .size   = 0x0c0000,
+       },
+};
+#endif
+
+
+static __initdata struct of_device_id storcenter_of_bus[] = {
+       { .name = "soc", },
+       {},
+};
+
+static int __init storcenter_device_probe(void)
+{
+       of_platform_bus_probe(NULL, storcenter_of_bus, NULL);
+       return 0;
+}
+machine_device_initcall(storcenter, storcenter_device_probe);
+
+
+static int __init storcenter_add_bridge(struct device_node *dev)
+{
+#ifdef CONFIG_PCI
+       int len;
+       struct pci_controller *hose;
+       const int *bus_range;
+
+       printk("Adding PCI host bridge %s\n", dev->full_name);
+
+       hose = pcibios_alloc_controller(dev);
+       if (hose == NULL)
+               return -ENOMEM;
+
+       bus_range = of_get_property(dev, "bus-range", &len);
+       hose->first_busno = bus_range ? bus_range[0] : 0;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+       setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0);
+
+       /* Interpret the "ranges" property */
+       /* This also maps the I/O region and sets isa_io/mem_base */
+       pci_process_bridge_OF_ranges(hose, dev, 1);
+#endif
+
+       return 0;
+}
+
+static void __init storcenter_setup_arch(void)
+{
+       struct device_node *np;
+
+#ifdef CONFIG_MTD_PHYSMAP
+       physmap_set_partitions(storcenter_physmap_partitions,
+                              ARRAY_SIZE(storcenter_physmap_partitions));
+#endif
+
+       /* Lookup PCI host bridges */
+       for_each_compatible_node(np, "pci", "mpc10x-pci")
+               storcenter_add_bridge(np);
+
+       printk(KERN_INFO "IOMEGA StorCenter\n");
+}
+
+/*
+ * Interrupt setup and service.  Interrrupts on the turbostation come
+ * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
+ */
+static void __init storcenter_init_IRQ(void)
+{
+       struct mpic *mpic;
+       struct device_node *dnp;
+       const void *prop;
+       int size;
+       phys_addr_t paddr;
+
+       dnp = of_find_node_by_type(NULL, "open-pic");
+       if (dnp == NULL)
+               return;
+
+       prop = of_get_property(dnp, "reg", &size);
+       if (prop == NULL) {
+               of_node_put(dnp);
+               return;
+       }
+
+       paddr = (phys_addr_t)of_translate_address(dnp, prop);
+       mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
+                       4, 32, " EPIC     ");
+
+       of_node_put(dnp);
+
+       BUG_ON(mpic == NULL);
+
+       /* PCI IRQs */
+       /*
+        * 2.6.12 patch:
+        *         openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200);
+        *         openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120);
+        *         first_irq, num_irqs, __iomem first_ISR
+        *         o_ss: i, src: 0, fdf50200
+        *         o_ss: i, src: 1, fdf50220
+        *         o_ss: i, src: 2, fdf50240
+        *         o_ss: i, src: 3, fdf50260
+        *         o_ss: i, src: 4, fdf50280
+        *         o_ss: i, src: 5, fdf51120
+        *         o_ss: i, src: 6, fdf51140
+        */
+       mpic_assign_isu(mpic, 0, paddr + 0x10200);
+       mpic_assign_isu(mpic, 1, paddr + 0x10220);
+       mpic_assign_isu(mpic, 2, paddr + 0x10240);
+       mpic_assign_isu(mpic, 3, paddr + 0x10260);
+       mpic_assign_isu(mpic, 4, paddr + 0x10280);
+       mpic_assign_isu(mpic, 5, paddr + 0x11120);
+       mpic_assign_isu(mpic, 6, paddr + 0x11140);
+
+       mpic_init(mpic);
+}
+
+static void storcenter_restart(char *cmd)
+{
+       local_irq_disable();
+
+       /* Set exception prefix high - to the firmware */
+       _nmask_and_or_msr(0, MSR_IP);
+
+       /* Wait for reset to happen */
+       for (;;) ;
+}
+
+static int __init storcenter_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       return of_flat_dt_is_compatible(root, "storcenter");
+}
+
+define_machine(storcenter){
+       .name                   = "IOMEGA StorCenter",
+       .probe                  = storcenter_probe,
+       .setup_arch             = storcenter_setup_arch,
+       .init_IRQ               = storcenter_init_IRQ,
+       .get_irq                = mpic_get_irq,
+       .restart                = storcenter_restart,
+       .calibrate_decr         = generic_calibrate_decr,
+};
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/Makefile powerpc.git/arch/powerpc/platforms/iseries/Makefile
--- linux-2.6.24/arch/powerpc/platforms/iseries/Makefile        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/Makefile 2008-01-28 20:25:49.000000000 +0100
@@ -5,7 +5,7 @@
 obj-y += exception.o
 obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
        hvcall.o proc.o htab.o iommu.o misc.o irq.o
-obj-$(CONFIG_PCI) += pci.o vpdinfo.o
+obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_VIOPATH) += viopath.o vio.o
 obj-$(CONFIG_MODULES) += ksyms.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/iommu.c powerpc.git/arch/powerpc/platforms/iseries/iommu.c
--- linux-2.6.24/arch/powerpc/platforms/iseries/iommu.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/iommu.c  2008-01-28 20:25:49.000000000 +0100
@@ -163,8 +163,10 @@
                    (it->it_type == TCE_PCI) &&
                    (it->it_offset == tbl->it_offset) &&
                    (it->it_index == tbl->it_index) &&
-                   (it->it_size == tbl->it_size))
+                   (it->it_size == tbl->it_size)) {
+                       of_node_put(node);
                        return it;
+               }
        }
        return NULL;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/lpevents.c powerpc.git/arch/powerpc/platforms/iseries/lpevents.c
--- linux-2.6.24/arch/powerpc/platforms/iseries/lpevents.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/lpevents.c       2008-01-28 20:25:49.000000000 +0100
@@ -239,7 +239,7 @@
                         * other CPUs, and that the deleted handler isn't
                         * still running on another CPU when we return.
                         */
-                       synchronize_rcu();
+                       synchronize_sched();
                        return 0;
                }
        }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/pci.c powerpc.git/arch/powerpc/platforms/iseries/pci.c
--- linux-2.6.24/arch/powerpc/platforms/iseries/pci.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/pci.c    2008-01-28 20:25:49.000000000 +0100
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2001 Allan Trautman, IBM Corporation
+ * Copyright (C) 2005,2007  Stephen Rothwell, IBM Corp
  *
  * iSeries specific routines for PCI.
  *
@@ -19,13 +20,18 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
+
+#undef DEBUG
+
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/of.h>
 
+#include <asm/types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
@@ -35,6 +41,7 @@
 #include <asm/abs_addr.h>
 #include <asm/firmware.h>
 
+#include <asm/iseries/hv_types.h>
 #include <asm/iseries/hv_call_xm.h>
 #include <asm/iseries/mf.h>
 #include <asm/iseries/iommu.h>
@@ -45,15 +52,8 @@
 #include "pci.h"
 #include "call_pci.h"
 
-/*
- * Forward declares of prototypes.
- */
-static struct device_node *find_Device_Node(int bus, int devfn);
-
-static int Pci_Retry_Max = 3;  /* Only retry 3 times  */
-static int Pci_Error_Flag = 1; /* Set Retry Error on. */
-
-static struct pci_ops iSeries_pci_ops;
+#define PCI_RETRY_MAX  3
+static int limit_pci_retries = 1;      /* Set Retry Error on. */
 
 /*
  * Table defines
@@ -62,6 +62,7 @@
 #define IOMM_TABLE_MAX_ENTRIES 1024
 #define IOMM_TABLE_ENTRY_SIZE  0x0000000000400000UL
 #define BASE_IO_MEMORY         0xE000000000000000UL
+#define END_IO_MEMORY          0xEFFFFFFFFFFFFFFFUL
 
 static unsigned long max_io_memory = BASE_IO_MEMORY;
 static long current_iomm_table_entry;
@@ -70,12 +71,237 @@
  * Lookup Tables.
  */
 static struct device_node *iomm_table[IOMM_TABLE_MAX_ENTRIES];
-static u8 iobar_table[IOMM_TABLE_MAX_ENTRIES];
+static u64 ds_addr_table[IOMM_TABLE_MAX_ENTRIES];
 
-static const char pci_io_text[] = "iSeries PCI I/O";
 static DEFINE_SPINLOCK(iomm_table_lock);
 
 /*
+ * Generate a Direct Select Address for the Hypervisor
+ */
+static inline u64 iseries_ds_addr(struct device_node *node)
+{
+       struct pci_dn *pdn = PCI_DN(node);
+       const u32 *sbp = of_get_property(node, "linux,subbus", NULL);
+
+       return ((u64)pdn->busno << 48) + ((u64)(sbp ? *sbp : 0) << 40)
+                       + ((u64)0x10 << 32);
+}
+
+/*
+ * Size of Bus VPD data
+ */
+#define BUS_VPDSIZE      1024
+
+/*
+ * Bus Vpd Tags
+ */
+#define VPD_END_OF_AREA                0x79
+#define VPD_ID_STRING          0x82
+#define VPD_VENDOR_AREA                0x84
+
+/*
+ * Mfg Area Tags
+ */
+#define VPD_FRU_FRAME_ID       0x4649  /* "FI" */
+#define VPD_SLOT_MAP_FORMAT    0x4D46  /* "MF" */
+#define VPD_SLOT_MAP           0x534D  /* "SM" */
+
+/*
+ * Structures of the areas
+ */
+struct mfg_vpd_area {
+       u16     tag;
+       u8      length;
+       u8      data1;
+       u8      data2;
+};
+#define MFG_ENTRY_SIZE   3
+
+struct slot_map {
+       u8      agent;
+       u8      secondary_agent;
+       u8      phb;
+       char    card_location[3];
+       char    parms[8];
+       char    reserved[2];
+};
+#define SLOT_ENTRY_SIZE   16
+
+/*
+ * Parse the Slot Area
+ */
+static void __init iseries_parse_slot_area(struct slot_map *map, int len,
+               HvAgentId agent, u8 *phb, char card[4])
+{
+       /*
+        * Parse Slot label until we find the one requested
+        */
+       while (len > 0) {
+               if (map->agent == agent) {
+                       /*
+                        * If Phb wasn't found, grab the entry first one found.
+                        */
+                       if (*phb == 0xff)
+                               *phb = map->phb;
+                       /* Found it, extract the data. */
+                       if (map->phb == *phb) {
+                               memcpy(card, &map->card_location, 3);
+                               card[3]  = 0;
+                               break;
+                       }
+               }
+               /* Point to the next Slot */
+               map = (struct slot_map *)((char *)map + SLOT_ENTRY_SIZE);
+               len -= SLOT_ENTRY_SIZE;
+       }
+}
+
+/*
+ * Parse the Mfg Area
+ */
+static void __init iseries_parse_mfg_area(struct mfg_vpd_area *area, int len,
+               HvAgentId agent, u8 *phb, u8 *frame, char card[4])
+{
+       u16 slot_map_fmt = 0;
+
+       /* Parse Mfg Data */
+       while (len > 0) {
+               int mfg_tag_len = area->length;
+               /* Frame ID         (FI 4649020310 ) */
+               if (area->tag == VPD_FRU_FRAME_ID)
+                       *frame = area->data1;
+               /* Slot Map Format  (MF 4D46020004 ) */
+               else if (area->tag == VPD_SLOT_MAP_FORMAT)
+                       slot_map_fmt = (area->data1 * 256)
+                               + area->data2;
+               /* Slot Map         (SM 534D90 */
+               else if (area->tag == VPD_SLOT_MAP) {
+                       struct slot_map *slot_map;
+
+                       if (slot_map_fmt == 0x1004)
+                               slot_map = (struct slot_map *)((char *)area
+                                               + MFG_ENTRY_SIZE + 1);
+                       else
+                               slot_map = (struct slot_map *)((char *)area
+                                               + MFG_ENTRY_SIZE);
+                       iseries_parse_slot_area(slot_map, mfg_tag_len,
+                                       agent, phb, card);
+               }
+               /*
+                * Point to the next Mfg Area
+                * Use defined size, sizeof give wrong answer
+                */
+               area = (struct mfg_vpd_area *)((char *)area + mfg_tag_len
+                               + MFG_ENTRY_SIZE);
+               len -= (mfg_tag_len + MFG_ENTRY_SIZE);
+       }
+}
+
+/*
+ * Look for "BUS".. Data is not Null terminated.
+ * PHBID of 0xFF indicates PHB was not found in VPD Data.
+ */
+static u8 __init iseries_parse_phbid(u8 *area, int len)
+{
+       while (len > 0) {
+               if ((*area == 'B') && (*(area + 1) == 'U')
+                               && (*(area + 2) == 'S')) {
+                       area += 3;
+                       while (*area == ' ')
+                               area++;
+                       return *area & 0x0F;
+               }
+               area++;
+               len--;
+       }
+       return 0xff;
+}
+
+/*
+ * Parse out the VPD Areas
+ */
+static void __init iseries_parse_vpd(u8 *data, int data_len,
+               HvAgentId agent, u8 *frame, char card[4])
+{
+       u8 phb = 0xff;
+
+       while (data_len > 0) {
+               int len;
+               u8 tag = *data;
+
+               if (tag == VPD_END_OF_AREA)
+                       break;
+               len = *(data + 1) + (*(data + 2) * 256);
+               data += 3;
+               data_len -= 3;
+               if (tag == VPD_ID_STRING)
+                       phb = iseries_parse_phbid(data, len);
+               else if (tag == VPD_VENDOR_AREA)
+                       iseries_parse_mfg_area((struct mfg_vpd_area *)data, len,
+                                       agent, &phb, frame, card);
+               /* Point to next Area. */
+               data += len;
+               data_len -= len;
+       }
+}
+
+static int __init iseries_get_location_code(u16 bus, HvAgentId agent,
+               u8 *frame, char card[4])
+{
+       int status = 0;
+       int bus_vpd_len = 0;
+       u8 *bus_vpd = kmalloc(BUS_VPDSIZE, GFP_KERNEL);
+
+       if (bus_vpd == NULL) {
+               printk("PCI: Bus VPD Buffer allocation failure.\n");
+               return 0;
+       }
+       bus_vpd_len = HvCallPci_getBusVpd(bus, iseries_hv_addr(bus_vpd),
+                                       BUS_VPDSIZE);
+       if (bus_vpd_len == 0) {
+               printk("PCI: Bus VPD Buffer zero length.\n");
+               goto out_free;
+       }
+       /* printk("PCI: bus_vpd: %p, %d\n",bus_vpd, bus_vpd_len); */
+       /* Make sure this is what I think it is */
+       if (*bus_vpd != VPD_ID_STRING) {
+               printk("PCI: Bus VPD Buffer missing starting tag.\n");
+               goto out_free;
+       }
+       iseries_parse_vpd(bus_vpd, bus_vpd_len, agent, frame, card);
+       status = 1;
+out_free:
+       kfree(bus_vpd);
+       return status;
+}
+
+/*
+ * Prints the device information.
+ * - Pass in pci_dev* pointer to the device.
+ * - Pass in the device count
+ *
+ * Format:
+ * PCI: Bus  0, Device 26, Vendor 0x12AE  Frame  1, Card  C10  Ethernet
+ * controller
+ */
+static void __init iseries_device_information(struct pci_dev *pdev,
+                                             u16 bus, HvSubBusNumber subbus)
+{
+       u8 frame = 0;
+       char card[4];
+       HvAgentId agent;
+
+       agent = ISERIES_PCI_AGENTID(ISERIES_GET_DEVICE_FROM_SUBBUS(subbus),
+                       ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus));
+
+       if (iseries_get_location_code(bus, agent, &frame, card)) {
+               printk(KERN_INFO "PCI: %s, Vendor %04X Frame%3d, "
+                      "Card %4s  0x%04X\n", pci_name(pdev), pdev->vendor,
+                      frame, card, (int)(pdev->class >> 8));
+       }
+}
+
+/*
  * iomm_table_allocate_entry
  *
  * Adds pci_dev entry in address translation table
@@ -87,7 +313,7 @@
  * - CurrentIndex is incremented to keep track of the last entry.
  * - Builds the resource entry for allocated BARs.
  */
-static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
+static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
 {
        struct resource *bar_res = &dev->resource[bar_num];
        long bar_size = pci_resource_len(dev, bar_num);
@@ -101,7 +327,6 @@
         * Set Resource values.
         */
        spin_lock(&iomm_table_lock);
-       bar_res->name = pci_io_text;
        bar_res->start = BASE_IO_MEMORY +
                IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
        bar_res->end = bar_res->start + bar_size - 1;
@@ -110,7 +335,8 @@
         */
        while (bar_size > 0 ) {
                iomm_table[current_iomm_table_entry] = dev->sysdata;
-               iobar_table[current_iomm_table_entry] = bar_num;
+               ds_addr_table[current_iomm_table_entry] =
+                       iseries_ds_addr(dev->sysdata) | (bar_num << 24);
                bar_size -= IOMM_TABLE_ENTRY_SIZE;
                ++current_iomm_table_entry;
        }
@@ -130,7 +356,7 @@
  * - Loops through The Bar resources(0 - 5) including the ROM
  *   is resource(6).
  */
-static void allocate_device_bars(struct pci_dev *dev)
+static void __init allocate_device_bars(struct pci_dev *dev)
 {
        int bar_num;
 
@@ -145,79 +371,19 @@
  * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx
  * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx
  */
-static void pci_Log_Error(char *Error_Text, int Bus, int SubBus,
-               int AgentId, int HvRc)
+static void pci_log_error(char *error, int bus, int subbus,
+               int agent, int hv_res)
 {
-       if (HvRc == 0x0302)
+       if (hv_res == 0x0302)
                return;
        printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X",
-              Error_Text, Bus, SubBus, AgentId, HvRc);
-}
-
-/*
- * iSeries_pci_final_fixup(void)
- */
-void __init iSeries_pci_final_fixup(void)
-{
-       struct pci_dev *pdev = NULL;
-       struct device_node *node;
-       int DeviceCount = 0;
-
-       /* Fix up at the device node and pci_dev relationship */
-       mf_display_src(0xC9000100);
-
-       printk("pcibios_final_fixup\n");
-       for_each_pci_dev(pdev) {
-               node = find_Device_Node(pdev->bus->number, pdev->devfn);
-               printk("pci dev %p (%x.%x), node %p\n", pdev,
-                      pdev->bus->number, pdev->devfn, node);
-
-               if (node != NULL) {
-                       struct pci_dn *pdn = PCI_DN(node);
-                       const u32 *agent;
-
-                       agent = of_get_property(node, "linux,agent-id", NULL);
-                       if ((pdn != NULL) && (agent != NULL)) {
-                               u8 irq = iSeries_allocate_IRQ(pdn->busno, 0,
-                                               pdn->bussubno);
-                               int err;
-
-                               err = HvCallXm_connectBusUnit(pdn->busno, pdn->bussubno,
-                                               *agent, irq);
-                               if (err)
-                                       pci_Log_Error("Connect Bus Unit",
-                                               pdn->busno, pdn->bussubno, *agent, err);
-                               else {
-                                       err = HvCallPci_configStore8(pdn->busno, pdn->bussubno,
-                                                       *agent,
-                                                       PCI_INTERRUPT_LINE,
-                                                       irq);
-                                       if (err)
-                                               pci_Log_Error("PciCfgStore Irq Failed!",
-                                                       pdn->busno, pdn->bussubno, *agent, err);
-                               }
-                               if (!err)
-                                       pdev->irq = irq;
-                       }
-
-                       ++DeviceCount;
-                       pdev->sysdata = (void *)node;
-                       PCI_DN(node)->pcidev = pdev;
-                       allocate_device_bars(pdev);
-                       iSeries_Device_Information(pdev, DeviceCount);
-                       iommu_devnode_init_iSeries(pdev, node);
-               } else
-                       printk("PCI: Device Tree not found for 0x%016lX\n",
-                                       (unsigned long)pdev);
-       }
-       iSeries_activate_IRQs();
-       mf_display_src(0xC9000200);
+              error, bus, subbus, agent, hv_res);
 }
 
 /*
  * Look down the chain to find the matching Device Device
  */
-static struct device_node *find_Device_Node(int bus, int devfn)
+static struct device_node *find_device_node(int bus, int devfn)
 {
        struct device_node *node;
 
@@ -230,22 +396,66 @@
        return NULL;
 }
 
-#if 0
 /*
- * Returns the device node for the passed pci_dev
- * Sanity Check Node PciDev to passed pci_dev
- * If none is found, returns a NULL which the client must handle.
+ * iSeries_pcibios_fixup_resources
+ *
+ * Fixes up all resources for devices
  */
-static struct device_node *get_Device_Node(struct pci_dev *pdev)
+void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 {
+       const u32 *agent;
+       const u32 *sub_bus;
+       unsigned char bus = pdev->bus->number;
        struct device_node *node;
+       int i;
+
+       node = find_device_node(bus, pdev->devfn);
+       pr_debug("PCI: iSeries %s, pdev %p, node %p\n",
+                pci_name(pdev), pdev, node);
+       if (!node) {
+               printk("PCI: %s disabled, device tree entry not found !\n",
+                      pci_name(pdev));
+               for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+                       pdev->resource[i].flags = 0;
+               return;
+       }
+       sub_bus = of_get_property(node, "linux,subbus", NULL);
+       agent = of_get_property(node, "linux,agent-id", NULL);
+       if (agent && sub_bus) {
+               u8 irq = iSeries_allocate_IRQ(bus, 0, *sub_bus);
+               int err;
+
+               err = HvCallXm_connectBusUnit(bus, *sub_bus, *agent, irq);
+               if (err)
+                       pci_log_error("Connect Bus Unit",
+                                     bus, *sub_bus, *agent, err);
+               else {
+                       err = HvCallPci_configStore8(bus, *sub_bus,
+                                       *agent, PCI_INTERRUPT_LINE, irq);
+                       if (err)
+                               pci_log_error("PciCfgStore Irq Failed!",
+                                               bus, *sub_bus, *agent, err);
+                       else
+                               pdev->irq = irq;
+               }
+       }
 
-       node = pdev->sysdata;
-       if (node == NULL || PCI_DN(node)->pcidev != pdev)
-               node = find_Device_Node(pdev->bus->number, pdev->devfn);
-       return node;
+       pdev->sysdata = node;
+       allocate_device_bars(pdev);
+       iseries_device_information(pdev, bus, *sub_bus);
+       iommu_devnode_init_iSeries(pdev, node);
+}
+
+/*
+ * iSeries_pci_final_fixup(void)
+ */
+void __init iSeries_pci_final_fixup(void)
+{
+       /* Fix up at the device node and pci_dev relationship */
+       mf_display_src(0xC9000100);
+       iSeries_activate_IRQs();
+       mf_display_src(0xC9000200);
 }
-#endif
 
 /*
  * Config space read and write functions.
@@ -269,7 +479,7 @@
 static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
                int offset, int size, u32 *val)
 {
-       struct device_node *node = find_Device_Node(bus->number, devfn);
+       struct device_node *node = find_device_node(bus->number, devfn);
        u64 fn;
        struct HvCallPci_LoadReturn ret;
 
@@ -299,7 +509,7 @@
 static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
                int offset, int size, u32 val)
 {
-       struct device_node *node = find_Device_Node(bus->number, devfn);
+       struct device_node *node = find_device_node(bus->number, devfn);
        u64 fn;
        u64 ret;
 
@@ -331,22 +541,22 @@
  * PCI: Device 23.90 ReadL Retry( 1)
  * PCI: Device 23.90 ReadL Retry Successful(1)
  */
-static int CheckReturnCode(char *TextHdr, struct device_node *DevNode,
+static int check_return_code(char *type, struct device_node *dn,
                int *retry, u64 ret)
 {
        if (ret != 0)  {
-               struct pci_dn *pdn = PCI_DN(DevNode);
+               struct pci_dn *pdn = PCI_DN(dn);
 
                (*retry)++;
                printk("PCI: %s: Device 0x%04X:%02X  I/O Error(%2d): 0x%04X\n",
-                               TextHdr, pdn->busno, pdn->devfn,
+                               type, pdn->busno, pdn->devfn,
                                *retry, (int)ret);
                /*
                 * Bump the retry and check for retry count exceeded.
                 * If, Exceeded, panic the system.
                 */
-               if (((*retry) > Pci_Retry_Max) &&
-                               (Pci_Error_Flag > 0)) {
+               if (((*retry) > PCI_RETRY_MAX) &&
+                               (limit_pci_retries > 0)) {
                        mf_display_src(0xB6000103);
                        panic_timeout = 0;
                        panic("PCI: Hardware I/O Error, SRC B6000103, "
@@ -363,28 +573,39 @@
  * the exposure of being device global.
  */
 static inline struct device_node *xlate_iomm_address(
-               const volatile void __iomem *IoAddress,
-               u64 *dsaptr, u64 *BarOffsetPtr)
+               const volatile void __iomem *addr,
+               u64 *dsaptr, u64 *bar_offset, const char *func)
 {
-       unsigned long OrigIoAddr;
-       unsigned long BaseIoAddr;
-       unsigned long TableIndex;
-       struct device_node *DevNode;
+       unsigned long orig_addr;
+       unsigned long base_addr;
+       unsigned long ind;
+       struct device_node *dn;
 
-       OrigIoAddr = (unsigned long __force)IoAddress;
-       if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory))
+       orig_addr = (unsigned long __force)addr;
+       if ((orig_addr < BASE_IO_MEMORY) || (orig_addr >= max_io_memory)) {
+               static unsigned long last_jiffies;
+               static int num_printed;
+
+               if ((jiffies - last_jiffies) > 60 * HZ) {
+                       last_jiffies = jiffies;
+                       num_printed = 0;
+               }
+               if (num_printed++ < 10)
+                       printk(KERN_ERR
+                               "iSeries_%s: invalid access at IO address %p\n",
+                               func, addr);
                return NULL;
-       BaseIoAddr = OrigIoAddr - BASE_IO_MEMORY;
-       TableIndex = BaseIoAddr / IOMM_TABLE_ENTRY_SIZE;
-       DevNode = iomm_table[TableIndex];
-
-       if (DevNode != NULL) {
-               int barnum = iobar_table[TableIndex];
-               *dsaptr = iseries_ds_addr(DevNode) | (barnum << 24);
-               *BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE;
+       }
+       base_addr = orig_addr - BASE_IO_MEMORY;
+       ind = base_addr / IOMM_TABLE_ENTRY_SIZE;
+       dn = iomm_table[ind];
+
+       if (dn != NULL) {
+               *dsaptr = ds_addr_table[ind];
+               *bar_offset = base_addr % IOMM_TABLE_ENTRY_SIZE;
        } else
-               panic("PCI: Invalid PCI IoAddress detected!\n");
-       return DevNode;
+               panic("PCI: Invalid PCI IO address detected!\n");
+       return dn;
 }
 
 /*
@@ -392,91 +613,58 @@
  * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal
  * else, data is returned in Big Endian format.
  */
-static u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress)
+static u8 iseries_readb(const volatile void __iomem *addr)
 {
-       u64 BarOffset;
+       u64 bar_offset;
        u64 dsa;
        int retry = 0;
        struct HvCallPci_LoadReturn ret;
-       struct device_node *DevNode =
-               xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
-       if (DevNode == NULL) {
-               static unsigned long last_jiffies;
-               static int num_printed;
+       struct device_node *dn =
+               xlate_iomm_address(addr, &dsa, &bar_offset, "read_byte");
 
-               if ((jiffies - last_jiffies) > 60 * HZ) {
-                       last_jiffies = jiffies;
-                       num_printed = 0;
-               }
-               if (num_printed++ < 10)
-                       printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n",
-                              IoAddress);
+       if (dn == NULL)
                return 0xff;
-       }
        do {
-               HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0);
-       } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0);
+               HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, bar_offset, 0);
+       } while (check_return_code("RDB", dn, &retry, ret.rc) != 0);
 
        return ret.value;
 }
 
-static u16 iSeries_Read_Word(const volatile void __iomem *IoAddress)
+static u16 iseries_readw_be(const volatile void __iomem *addr)
 {
-       u64 BarOffset;
+       u64 bar_offset;
        u64 dsa;
        int retry = 0;
        struct HvCallPci_LoadReturn ret;
-       struct device_node *DevNode =
-               xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
-       if (DevNode == NULL) {
-               static unsigned long last_jiffies;
-               static int num_printed;
+       struct device_node *dn =
+               xlate_iomm_address(addr, &dsa, &bar_offset, "read_word");
 
-               if ((jiffies - last_jiffies) > 60 * HZ) {
-                       last_jiffies = jiffies;
-                       num_printed = 0;
-               }
-               if (num_printed++ < 10)
-                       printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n",
-                              IoAddress);
+       if (dn == NULL)
                return 0xffff;
-       }
        do {
                HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa,
-                               BarOffset, 0);
-       } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0);
+                               bar_offset, 0);
+       } while (check_return_code("RDW", dn, &retry, ret.rc) != 0);
 
        return ret.value;
 }
 
-static u32 iSeries_Read_Long(const volatile void __iomem *IoAddress)
+static u32 iseries_readl_be(const volatile void __iomem *addr)
 {
-       u64 BarOffset;
+       u64 bar_offset;
        u64 dsa;
        int retry = 0;
        struct HvCallPci_LoadReturn ret;
-       struct device_node *DevNode =
-               xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+       struct device_node *dn =
+               xlate_iomm_address(addr, &dsa, &bar_offset, "read_long");
 
-       if (DevNode == NULL) {
-               static unsigned long last_jiffies;
-               static int num_printed;
-
-               if ((jiffies - last_jiffies) > 60 * HZ) {
-                       last_jiffies = jiffies;
-                       num_printed = 0;
-               }
-               if (num_printed++ < 10)
-                       printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n",
-                              IoAddress);
+       if (dn == NULL)
                return 0xffffffff;
-       }
        do {
                HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa,
-                               BarOffset, 0);
-       } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0);
+                               bar_offset, 0);
+       } while (check_return_code("RDL", dn, &retry, ret.rc) != 0);
 
        return ret.value;
 }
@@ -485,134 +673,72 @@
  * Write MM I/O Instructions for the iSeries
  *
  */
-static void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress)
+static void iseries_writeb(u8 data, volatile void __iomem *addr)
 {
-       u64 BarOffset;
+       u64 bar_offset;
        u64 dsa;
        int retry = 0;
        u64 rc;
-       struct device_node *DevNode =
-               xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
-       if (DevNode == NULL) {
-               static unsigned long last_jiffies;
-               static int num_printed;
+       struct device_node *dn =
+               xlate_iomm_address(addr, &dsa, &bar_offset, "write_byte");
 
-               if ((jiffies - last_jiffies) > 60 * HZ) {
-                       last_jiffies = jiffies;
-                       num_printed = 0;
-               }
-               if (num_printed++ < 10)
-                       printk(KERN_ERR "iSeries_Write_Byte: invalid access at IO address %p\n", IoAddress);
+       if (dn == NULL)
                return;
-       }
        do {
-               rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0);
-       } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0);
+               rc = HvCall4(HvCallPciBarStore8, dsa, bar_offset, data, 0);
+       } while (check_return_code("WWB", dn, &retry, rc) != 0);
 }
 
-static void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress)
+static void iseries_writew_be(u16 data, volatile void __iomem *addr)
 {
-       u64 BarOffset;
+       u64 bar_offset;
        u64 dsa;
        int retry = 0;
        u64 rc;
-       struct device_node *DevNode =
-               xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+       struct device_node *dn =
+               xlate_iomm_address(addr, &dsa, &bar_offset, "write_word");
 
-       if (DevNode == NULL) {
-               static unsigned long last_jiffies;
-               static int num_printed;
-
-               if ((jiffies - last_jiffies) > 60 * HZ) {
-                       last_jiffies = jiffies;
-                       num_printed = 0;
-               }
-               if (num_printed++ < 10)
-                       printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n",
-                              IoAddress);
+       if (dn == NULL)
                return;
-       }
        do {
-               rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, data, 0);
-       } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0);
+               rc = HvCall4(HvCallPciBarStore16, dsa, bar_offset, data, 0);
+       } while (check_return_code("WWW", dn, &retry, rc) != 0);
 }
 
-static void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress)
+static void iseries_writel_be(u32 data, volatile void __iomem *addr)
 {
-       u64 BarOffset;
+       u64 bar_offset;
        u64 dsa;
        int retry = 0;
        u64 rc;
-       struct device_node *DevNode =
-               xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
-       if (DevNode == NULL) {
-               static unsigned long last_jiffies;
-               static int num_printed;
+       struct device_node *dn =
+               xlate_iomm_address(addr, &dsa, &bar_offset, "write_long");
 
-               if ((jiffies - last_jiffies) > 60 * HZ) {
-                       last_jiffies = jiffies;
-                       num_printed = 0;
-               }
-               if (num_printed++ < 10)
-                       printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n",
-                              IoAddress);
+       if (dn == NULL)
                return;
-       }
        do {
-               rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, data, 0);
-       } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0);
-}
-
-static u8 iseries_readb(const volatile void __iomem *addr)
-{
-       return iSeries_Read_Byte(addr);
+               rc = HvCall4(HvCallPciBarStore32, dsa, bar_offset, data, 0);
+       } while (check_return_code("WWL", dn, &retry, rc) != 0);
 }
 
 static u16 iseries_readw(const volatile void __iomem *addr)
 {
-       return le16_to_cpu(iSeries_Read_Word(addr));
+       return le16_to_cpu(iseries_readw_be(addr));
 }
 
 static u32 iseries_readl(const volatile void __iomem *addr)
 {
-       return le32_to_cpu(iSeries_Read_Long(addr));
-}
-
-static u16 iseries_readw_be(const volatile void __iomem *addr)
-{
-       return iSeries_Read_Word(addr);
-}
-
-static u32 iseries_readl_be(const volatile void __iomem *addr)
-{
-       return iSeries_Read_Long(addr);
-}
-
-static void iseries_writeb(u8 data, volatile void __iomem *addr)
-{
-       iSeries_Write_Byte(data, addr);
+       return le32_to_cpu(iseries_readl_be(addr));
 }
 
 static void iseries_writew(u16 data, volatile void __iomem *addr)
 {
-       iSeries_Write_Word(cpu_to_le16(data), addr);
+       iseries_writew_be(cpu_to_le16(data), addr);
 }
 
 static void iseries_writel(u32 data, volatile void __iomem *addr)
 {
-       iSeries_Write_Long(cpu_to_le32(data), addr);
-}
-
-static void iseries_writew_be(u16 data, volatile void __iomem *addr)
-{
-       iSeries_Write_Word(data, addr);
-}
-
-static void iseries_writel_be(u32 data, volatile void __iomem *addr)
-{
-       iSeries_Write_Long(data, addr);
+       iseries_writel(cpu_to_le32(data), addr);
 }
 
 static void iseries_readsb(const volatile void __iomem *addr, void *buf,
@@ -620,7 +746,7 @@
 {
        u8 *dst = buf;
        while(count-- > 0)
-               *(dst++) = iSeries_Read_Byte(addr);
+               *(dst++) = iseries_readb(addr);
 }
 
 static void iseries_readsw(const volatile void __iomem *addr, void *buf,
@@ -628,7 +754,7 @@
 {
        u16 *dst = buf;
        while(count-- > 0)
-               *(dst++) = iSeries_Read_Word(addr);
+               *(dst++) = iseries_readw_be(addr);
 }
 
 static void iseries_readsl(const volatile void __iomem *addr, void *buf,
@@ -636,7 +762,7 @@
 {
        u32 *dst = buf;
        while(count-- > 0)
-               *(dst++) = iSeries_Read_Long(addr);
+               *(dst++) = iseries_readl_be(addr);
 }
 
 static void iseries_writesb(volatile void __iomem *addr, const void *buf,
@@ -644,7 +770,7 @@
 {
        const u8 *src = buf;
        while(count-- > 0)
-               iSeries_Write_Byte(*(src++), addr);
+               iseries_writeb(*(src++), addr);
 }
 
 static void iseries_writesw(volatile void __iomem *addr, const void *buf,
@@ -652,7 +778,7 @@
 {
        const u16 *src = buf;
        while(count-- > 0)
-               iSeries_Write_Word(*(src++), addr);
+               iseries_writew_be(*(src++), addr);
 }
 
 static void iseries_writesl(volatile void __iomem *addr, const void *buf,
@@ -660,7 +786,7 @@
 {
        const u32 *src = buf;
        while(count-- > 0)
-               iSeries_Write_Long(*(src++), addr);
+               iseries_writel_be(*(src++), addr);
 }
 
 static void iseries_memset_io(volatile void __iomem *addr, int c,
@@ -669,7 +795,7 @@
        volatile char __iomem *d = addr;
 
        while (n-- > 0)
-               iSeries_Write_Byte(c, d++);
+               iseries_writeb(c, d++);
 }
 
 static void iseries_memcpy_fromio(void *dest, const volatile void __iomem *src,
@@ -679,7 +805,7 @@
        const volatile char __iomem *s = src;
 
        while (n-- > 0)
-               *d++ = iSeries_Read_Byte(s++);
+               *d++ = iseries_readb(s++);
 }
 
 static void iseries_memcpy_toio(volatile void __iomem *dest, const void *src,
@@ -689,7 +815,7 @@
        volatile char __iomem *d = dest;
 
        while (n-- > 0)
-               iSeries_Write_Byte(*s++, d++);
+               iseries_writeb(*s++, d++);
 }
 
 /* We only set MMIO ops. The default PIO ops will be default
@@ -742,6 +868,8 @@
        /* Install IO hooks */
        ppc_pci_io = iseries_pci_io;
 
+       pci_probe_only = 1;
+
        /* iSeries has no IO space in the common sense, it needs to set
         * the IO base to 0
         */
@@ -767,11 +895,21 @@
                phb = pcibios_alloc_controller(node);
                if (phb == NULL)
                        continue;
+               /* All legacy iSeries PHBs are in domain zero */
+               phb->global_number = 0;
 
-               phb->pci_mem_offset = bus;
                phb->first_busno = bus;
                phb->last_busno = bus;
                phb->ops = &iSeries_pci_ops;
+               phb->io_base_virt = (void __iomem *)_IO_BASE;
+               phb->io_resource.flags = IORESOURCE_IO;
+               phb->io_resource.start = BASE_IO_MEMORY;
+               phb->io_resource.end = END_IO_MEMORY;
+               phb->io_resource.name = "iSeries PCI IO";
+               phb->mem_resources[0].flags = IORESOURCE_MEM;
+               phb->mem_resources[0].start = BASE_IO_MEMORY;
+               phb->mem_resources[0].end = END_IO_MEMORY;
+               phb->mem_resources[0].name = "Series PCI MEM";
        }
 
        of_node_put(root);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/pci.h powerpc.git/arch/powerpc/platforms/iseries/pci.h
--- linux-2.6.24/arch/powerpc/platforms/iseries/pci.h   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/pci.h    2008-01-28 20:25:49.000000000 +0100
@@ -30,10 +30,6 @@
  * End Change Activity
  */
 
-#include <asm/pci-bridge.h>
-
-struct pci_dev;                                /* For Forward Reference */
-
 /*
  * Decodes Linux DevFn to iSeries DevFn, bridge device, or function.
  * For Linux, see PCI_SLOT and PCI_FUNC in include/linux/pci.h
@@ -47,17 +43,16 @@
 #define ISERIES_GET_DEVICE_FROM_SUBBUS(subbus)         ((subbus >> 5) & 0x7)
 #define ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus)       ((subbus >> 2) & 0x7)
 
-/*
- * Generate a Direct Select Address for the Hypervisor
- */
-static inline u64 iseries_ds_addr(struct device_node *node)
-{
-       struct pci_dn *pdn = PCI_DN(node);
-
-       return ((u64)pdn->busno << 48) + ((u64)pdn->bussubno << 40)
-                       + ((u64)0x10 << 32);
-}
+struct pci_dev;
 
-extern void    iSeries_Device_Information(struct pci_dev*, int);
+#ifdef CONFIG_PCI
+extern void    iSeries_pcibios_init(void);
+extern void    iSeries_pci_final_fixup(void);
+extern void    iSeries_pcibios_fixup_resources(struct pci_dev *dev);
+#else
+static inline void     iSeries_pcibios_init(void) { }
+static inline void     iSeries_pci_final_fixup(void) { }
+static inline void     iSeries_pcibios_fixup_resources(struct pci_dev *dev) {}
+#endif
 
 #endif /* _PLATFORMS_ISERIES_PCI_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/setup.c powerpc.git/arch/powerpc/platforms/iseries/setup.c
--- linux-2.6.24/arch/powerpc/platforms/iseries/setup.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/setup.c  2008-01-28 20:25:49.000000000 +0100
@@ -63,6 +63,7 @@
 #include "main_store.h"
 #include "call_sm.h"
 #include "call_hpt.h"
+#include "pci.h"
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -74,11 +75,6 @@
 static unsigned long build_iSeries_Memory_Map(void);
 static void iseries_shared_idle(void);
 static void iseries_dedicated_idle(void);
-#ifdef CONFIG_PCI
-extern void iSeries_pci_final_fixup(void);
-#else
-static void iSeries_pci_final_fixup(void) { }
-#endif
 
 
 struct MemoryBlock {
@@ -112,13 +108,13 @@
         * correctly.
         */
        mb_array[0].logicalStart = 0;
-       mb_array[0].logicalEnd = 0x100000000;
+       mb_array[0].logicalEnd = 0x100000000UL;
        mb_array[0].absStart = 0;
-       mb_array[0].absEnd = 0x100000000;
+       mb_array[0].absEnd = 0x100000000UL;
 
        if (holeSize) {
                numMemoryBlocks = 2;
-               holeStart = holeStart & 0x000fffffffffffff;
+               holeStart = holeStart & 0x000fffffffffffffUL;
                holeStart = addr_to_chunk(holeStart);
                holeFirstChunk = holeStart;
                holeSize = addr_to_chunk(holeSize);
@@ -128,9 +124,9 @@
                mb_array[0].logicalEnd = holeFirstChunk;
                mb_array[0].absEnd = holeFirstChunk;
                mb_array[1].logicalStart = holeFirstChunk;
-               mb_array[1].logicalEnd = 0x100000000 - holeSizeChunks;
+               mb_array[1].logicalEnd = 0x100000000UL - holeSizeChunks;
                mb_array[1].absStart = holeFirstChunk + holeSizeChunks;
-               mb_array[1].absEnd = 0x100000000;
+               mb_array[1].absEnd = 0x100000000UL;
        }
        return numMemoryBlocks;
 }
@@ -234,9 +230,9 @@
                                mb_array[i].logicalEnd,
                                mb_array[i].absStart, mb_array[i].absEnd);
                mb_array[i].absStart = addr_to_chunk(mb_array[i].absStart &
-                               0x000fffffffffffff);
+                               0x000fffffffffffffUL);
                mb_array[i].absEnd = addr_to_chunk(mb_array[i].absEnd &
-                               0x000fffffffffffff);
+                               0x000fffffffffffffUL);
                mb_array[i].logicalStart =
                        addr_to_chunk(mb_array[i].logicalStart);
                mb_array[i].logicalEnd = addr_to_chunk(mb_array[i].logicalEnd);
@@ -320,7 +316,7 @@
 };
 EXPORT_SYMBOL(mschunks_map);
 
-void mschunks_alloc(unsigned long num_chunks)
+static void mschunks_alloc(unsigned long num_chunks)
 {
        klimit = _ALIGN(klimit, sizeof(u32));
        mschunks_map.mapping = (u32 *)klimit;
@@ -499,6 +495,8 @@
                        itVpdAreas.xSlicMaxLogicalProcs);
        printk("Max physical processors = %d\n",
                        itVpdAreas.xSlicMaxPhysicalProcs);
+
+       iSeries_pcibios_init();
 }
 
 static void iSeries_show_cpuinfo(struct seq_file *m)
@@ -641,24 +639,25 @@
 }
 
 define_machine(iseries) {
-       .name           = "iSeries",
-       .setup_arch     = iSeries_setup_arch,
-       .show_cpuinfo   = iSeries_show_cpuinfo,
-       .init_IRQ       = iSeries_init_IRQ,
-       .get_irq        = iSeries_get_irq,
-       .init_early     = iSeries_init_early,
-       .pcibios_fixup  = iSeries_pci_final_fixup,
-       .restart        = mf_reboot,
-       .power_off      = mf_power_off,
-       .halt           = mf_power_off,
-       .get_boot_time  = iSeries_get_boot_time,
-       .set_rtc_time   = iSeries_set_rtc_time,
-       .get_rtc_time   = iSeries_get_rtc_time,
-       .calibrate_decr = generic_calibrate_decr,
-       .progress       = iSeries_progress,
-       .probe          = iseries_probe,
-       .ioremap        = iseries_ioremap,
-       .iounmap        = iseries_iounmap,
+       .name                   = "iSeries",
+       .setup_arch             = iSeries_setup_arch,
+       .show_cpuinfo           = iSeries_show_cpuinfo,
+       .init_IRQ               = iSeries_init_IRQ,
+       .get_irq                = iSeries_get_irq,
+       .init_early             = iSeries_init_early,
+       .pcibios_fixup          = iSeries_pci_final_fixup,
+       .pcibios_fixup_resources= iSeries_pcibios_fixup_resources,
+       .restart                = mf_reboot,
+       .power_off              = mf_power_off,
+       .halt                   = mf_power_off,
+       .get_boot_time          = iSeries_get_boot_time,
+       .set_rtc_time           = iSeries_set_rtc_time,
+       .get_rtc_time           = iSeries_get_rtc_time,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = iSeries_progress,
+       .probe                  = iseries_probe,
+       .ioremap                = iseries_ioremap,
+       .iounmap                = iseries_iounmap,
        /* XXX Implement enable_pmcs for iSeries */
 };
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/setup.h powerpc.git/arch/powerpc/platforms/iseries/setup.h
--- linux-2.6.24/arch/powerpc/platforms/iseries/setup.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/setup.h  2008-01-28 20:25:49.000000000 +0100
@@ -17,6 +17,7 @@
 #ifndef        __ISERIES_SETUP_H__
 #define        __ISERIES_SETUP_H__
 
+extern void *iSeries_early_setup(void);
 extern unsigned long iSeries_get_boot_time(void);
 extern int iSeries_set_rtc_time(struct rtc_time *tm);
 extern void iSeries_get_rtc_time(struct rtc_time *tm);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/iseries/vpdinfo.c powerpc.git/arch/powerpc/platforms/iseries/vpdinfo.c
--- linux-2.6.24/arch/powerpc/platforms/iseries/vpdinfo.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/iseries/vpdinfo.c        1970-01-01 01:00:00.000000000 +0100
@@ -1,275 +0,0 @@
-/*
- * This code gets the card location of the hardware
- * Copyright (C) 2001  <Allan H Trautman> <IBM Corp>
- * Copyright (C) 2005  Stephen Rothwel, IBM Corp
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the:
- * Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330,
- * Boston, MA  02111-1307  USA
- *
- * Change Activity:
- *   Created, Feb 2, 2001
- *   Ported to ppc64, August 20, 2001
- * End Change Activity
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-
-#include <asm/types.h>
-#include <asm/resource.h>
-#include <asm/abs_addr.h>
-#include <asm/pci-bridge.h>
-#include <asm/iseries/hv_types.h>
-
-#include "pci.h"
-#include "call_pci.h"
-
-/*
- * Size of Bus VPD data
- */
-#define BUS_VPDSIZE      1024
-
-/*
- * Bus Vpd Tags
- */
-#define  VpdEndOfAreaTag   0x79
-#define  VpdIdStringTag    0x82
-#define  VpdVendorAreaTag  0x84
-
-/*
- * Mfg Area Tags
- */
-#define  VpdFruFrameId    0x4649     // "FI"
-#define  VpdSlotMapFormat 0x4D46     // "MF"
-#define  VpdSlotMap       0x534D     // "SM"
-
-/*
- * Structures of the areas
- */
-struct MfgVpdAreaStruct {
-       u16 Tag;
-       u8  TagLength;
-       u8  AreaData1;
-       u8  AreaData2;
-};
-typedef struct MfgVpdAreaStruct MfgArea;
-#define MFG_ENTRY_SIZE   3
-
-struct SlotMapStruct {
-       u8   AgentId;
-       u8   SecondaryAgentId;
-       u8   PhbId;
-       char CardLocation[3];
-       char Parms[8];
-       char Reserved[2];
-};
-typedef struct SlotMapStruct SlotMap;
-#define SLOT_ENTRY_SIZE   16
-
-/*
- * Parse the Slot Area
- */
-static void __init iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen,
-               HvAgentId agent, u8 *PhbId, char card[4])
-{
-       int SlotMapLen = MapLen;
-       SlotMap *SlotMapPtr = MapPtr;
-
-       /*
-        * Parse Slot label until we find the one requested
-        */
-       while (SlotMapLen > 0) {
-               if (SlotMapPtr->AgentId == agent) {
-                       /*
-                        * If Phb wasn't found, grab the entry first one found.
-                        */
-                       if (*PhbId == 0xff)
-                               *PhbId = SlotMapPtr->PhbId;
-                       /* Found it, extract the data. */
-                       if (SlotMapPtr->PhbId == *PhbId) {
-                               memcpy(card, &SlotMapPtr->CardLocation, 3);
-                               card[3]  = 0;
-                               break;
-                       }
-               }
-               /* Point to the next Slot */
-               SlotMapPtr = (SlotMap *)((char *)SlotMapPtr + SLOT_ENTRY_SIZE);
-               SlotMapLen -= SLOT_ENTRY_SIZE;
-       }
-}
-
-/*
- * Parse the Mfg Area
- */
-static void __init iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen,
-               HvAgentId agent, u8 *PhbId,
-               u8 *frame, char card[4])
-{
-       MfgArea *MfgAreaPtr = (MfgArea *)AreaData;
-       int MfgAreaLen = AreaLen;
-       u16 SlotMapFmt = 0;
-
-       /* Parse Mfg Data */
-       while (MfgAreaLen > 0) {
-               int MfgTagLen = MfgAreaPtr->TagLength;
-               /* Frame ID         (FI 4649020310 ) */
-               if (MfgAreaPtr->Tag == VpdFruFrameId)           /* FI  */
-                       *frame = MfgAreaPtr->AreaData1;
-               /* Slot Map Format  (MF 4D46020004 ) */
-               else if (MfgAreaPtr->Tag == VpdSlotMapFormat)   /* MF  */
-                       SlotMapFmt = (MfgAreaPtr->AreaData1 * 256)
-                               + MfgAreaPtr->AreaData2;
-               /* Slot Map         (SM 534D90 */
-               else if (MfgAreaPtr->Tag == VpdSlotMap) {       /* SM  */
-                       SlotMap *SlotMapPtr;
-
-                       if (SlotMapFmt == 0x1004)
-                               SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr
-                                               + MFG_ENTRY_SIZE + 1);
-                       else
-                               SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr
-                                               + MFG_ENTRY_SIZE);
-                       iSeries_Parse_SlotArea(SlotMapPtr, MfgTagLen,
-                                       agent, PhbId, card);
-               }
-               /*
-                * Point to the next Mfg Area
-                * Use defined size, sizeof give wrong answer
-                */
-               MfgAreaPtr = (MfgArea *)((char *)MfgAreaPtr + MfgTagLen
-                               + MFG_ENTRY_SIZE);
-               MfgAreaLen -= (MfgTagLen + MFG_ENTRY_SIZE);
-       }
-}
-
-/*
- * Look for "BUS".. Data is not Null terminated.
- * PHBID of 0xFF indicates PHB was not found in VPD Data.
- */
-static int __init iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength)
-{
-       u8 *PhbPtr = AreaPtr;
-       int DataLen = AreaLength;
-       char PhbId = 0xFF;
-
-       while (DataLen > 0) {
-               if ((*PhbPtr == 'B') && (*(PhbPtr + 1) == 'U')
-                               && (*(PhbPtr + 2) == 'S')) {
-                       PhbPtr += 3;
-                       while (*PhbPtr == ' ')
-                               ++PhbPtr;
-                       PhbId = (*PhbPtr & 0x0F);
-                       break;
-               }
-               ++PhbPtr;
-               --DataLen;
-       }
-       return PhbId;
-}
-
-/*
- * Parse out the VPD Areas
- */
-static void __init iSeries_Parse_Vpd(u8 *VpdData, int VpdDataLen,
-               HvAgentId agent, u8 *frame, char card[4])
-{
-       u8 *TagPtr = VpdData;
-       int DataLen = VpdDataLen - 3;
-       u8 PhbId = 0xff;
-
-       while ((*TagPtr != VpdEndOfAreaTag) && (DataLen > 0)) {
-               int AreaLen = *(TagPtr + 1) + (*(TagPtr + 2) * 256);
-               u8 *AreaData  = TagPtr + 3;
-
-               if (*TagPtr == VpdIdStringTag)
-                       PhbId = iSeries_Parse_PhbId(AreaData, AreaLen);
-               else if (*TagPtr == VpdVendorAreaTag)
-                       iSeries_Parse_MfgArea(AreaData, AreaLen,
-                                       agent, &PhbId, frame, card);
-               /* Point to next Area. */
-               TagPtr  = AreaData + AreaLen;
-               DataLen -= AreaLen;
-       }
-}
-
-static int __init iSeries_Get_Location_Code(u16 bus, HvAgentId agent,
-               u8 *frame, char card[4])
-{
-       int status = 0;
-       int BusVpdLen = 0;
-       u8 *BusVpdPtr = kmalloc(BUS_VPDSIZE, GFP_KERNEL);
-
-       if (BusVpdPtr == NULL) {
-               printk("PCI: Bus VPD Buffer allocation failure.\n");
-               return 0;
-       }
-       BusVpdLen = HvCallPci_getBusVpd(bus, iseries_hv_addr(BusVpdPtr),
-                                       BUS_VPDSIZE);
-       if (BusVpdLen == 0) {
-               printk("PCI: Bus VPD Buffer zero length.\n");
-               goto out_free;
-       }
-       /* printk("PCI: BusVpdPtr: %p, %d\n",BusVpdPtr, BusVpdLen); */
-       /* Make sure this is what I think it is */
-       if (*BusVpdPtr != VpdIdStringTag) {     /* 0x82 */
-               printk("PCI: Bus VPD Buffer missing starting tag.\n");
-               goto out_free;
-       }
-       iSeries_Parse_Vpd(BusVpdPtr, BusVpdLen, agent, frame, card);
-       status = 1;
-out_free:
-       kfree(BusVpdPtr);
-       return status;
-}
-
-/*
- * Prints the device information.
- * - Pass in pci_dev* pointer to the device.
- * - Pass in the device count
- *
- * Format:
- * PCI: Bus  0, Device 26, Vendor 0x12AE  Frame  1, Card  C10  Ethernet
- * controller
- */
-void __init iSeries_Device_Information(struct pci_dev *PciDev, int count)
-{
-       struct device_node *DevNode = PciDev->sysdata;
-       struct pci_dn *pdn;
-       u16 bus;
-       u8 frame = 0;
-       char card[4];
-       HvSubBusNumber subbus;
-       HvAgentId agent;
-
-       if (DevNode == NULL) {
-               printk("%d. PCI: iSeries_Device_Information DevNode is NULL\n",
-                               count);
-               return;
-       }
-
-       pdn = PCI_DN(DevNode);
-       bus = pdn->busno;
-       subbus = pdn->bussubno;
-       agent = ISERIES_PCI_AGENTID(ISERIES_GET_DEVICE_FROM_SUBBUS(subbus),
-                       ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus));
-
-       if (iSeries_Get_Location_Code(bus, agent, &frame, card)) {
-               printk("%d. PCI: Bus%3d, Device%3d, Vendor %04X Frame%3d, "
-                       "Card %4s  0x%04X\n", count, bus,
-                       PCI_SLOT(PciDev->devfn), PciDev->vendor, frame,
-                       card, (int)(PciDev->class >> 8));
-       }
-}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/maple/Kconfig powerpc.git/arch/powerpc/platforms/maple/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/maple/Kconfig   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/maple/Kconfig    2008-01-28 20:25:49.000000000 +0100
@@ -1,6 +1,7 @@
 config PPC_MAPLE
        depends on PPC_MULTIPLATFORM && PPC64
        bool "Maple 970FX Evaluation Board"
+       select PCI
        select MPIC
        select U3_DART
        select MPIC_U3_HT_IRQS
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/maple/pci.c powerpc.git/arch/powerpc/platforms/maple/pci.c
--- linux-2.6.24/arch/powerpc/platforms/maple/pci.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/maple/pci.c      2008-01-28 20:25:49.000000000 +0100
@@ -558,7 +558,7 @@
         * safe assumptions hopefully.
         */
        if (u3_agp) {
-               struct device_node *np = u3_agp->arch_data;
+               struct device_node *np = u3_agp->dn;
                PCI_DN(np)->busno = 0xf0;
                for (np = np->child; np; np = np->sibling)
                        PCI_DN(np)->busno = 0xf0;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/maple/setup.c powerpc.git/arch/powerpc/platforms/maple/setup.c
--- linux-2.6.24/arch/powerpc/platforms/maple/setup.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/maple/setup.c    2008-01-28 20:25:49.000000000 +0100
@@ -42,6 +42,7 @@
 #include <linux/serial.h>
 #include <linux/smp.h>
 #include <linux/bitops.h>
+#include <linux/of_device.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
@@ -56,7 +57,6 @@
 #include <asm/dma.h>
 #include <asm/cputable.h>
 #include <asm/time.h>
-#include <asm/of_device.h>
 #include <asm/lmb.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/Kconfig powerpc.git/arch/powerpc/platforms/pasemi/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/pasemi/Kconfig  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/Kconfig   2008-01-28 20:25:49.000000000 +0100
@@ -3,6 +3,7 @@
        bool "PA Semi SoC-based platforms"
        default n
        select MPIC
+       select PCI
        select PPC_UDBG_16550
        select PPC_NATIVE
        select MPIC_BROKEN_REGREAD
@@ -17,7 +18,7 @@
        bool "PA Semi IOMMU support"
        depends on PPC_PASEMI
        help
-         IOMMU support for PA6T-1682M
+         IOMMU support for PA Semi PWRficient
 
 config PPC_PASEMI_IOMMU_DMA_FORCE
        bool "Force DMA engine to use IOMMU"
@@ -36,13 +37,4 @@
        help
          Driver for MDIO via GPIO on PWRficient platforms
 
-config ELECTRA_IDE
-      tristate "Electra IDE driver"
-      default y
-      depends on PPC_PASEMI && ATA
-      select PATA_PLATFORM
-      help
-       This includes driver support for the Electra on-board IDE
-       interface.
-
 endmenu
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/Makefile powerpc.git/arch/powerpc/platforms/pasemi/Makefile
--- linux-2.6.24/arch/powerpc/platforms/pasemi/Makefile 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/Makefile  2008-01-28 20:25:49.000000000 +0100
@@ -1,4 +1,3 @@
 obj-y  += setup.o pci.o time.o idle.o powersave.o iommu.o
 obj-$(CONFIG_PPC_PASEMI_MDIO)  += gpio_mdio.o
-obj-$(CONFIG_ELECTRA_IDE) += electra_ide.o
 obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/cpufreq.c powerpc.git/arch/powerpc/platforms/pasemi/cpufreq.c
--- linux-2.6.24/arch/powerpc/platforms/pasemi/cpufreq.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/cpufreq.c 2008-01-28 20:25:49.000000000 +0100
@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/time.h>
+#include <asm/smp.h>
 
 #define SDCASR_REG             0x0100
 #define SDCASR_REG_STRIDE      0x1000
@@ -124,6 +125,11 @@
        local_irq_restore(flags);
 }
 
+int check_astate(void)
+{
+       return get_cur_astate(hard_smp_processor_id());
+}
+
 void restore_astate(int cpu)
 {
        set_astate(cpu, current_astate);
@@ -147,7 +153,10 @@
        if (!cpu)
                goto out;
 
-       dn = of_find_compatible_node(NULL, "sdc", "1682m-sdc");
+       dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
+       if (!dn)
+               dn = of_find_compatible_node(NULL, NULL,
+                                            "pasemi,pwrficient-sdc");
        if (!dn)
                goto out;
        err = of_address_to_resource(dn, 0, &res);
@@ -160,7 +169,10 @@
                goto out;
        }
 
-       dn = of_find_compatible_node(NULL, "gizmo", "1682m-gizmo");
+       dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
+       if (!dn)
+               dn = of_find_compatible_node(NULL, NULL,
+                                            "pasemi,pwrficient-gizmo");
        if (!dn) {
                err = -ENODEV;
                goto out_unmap_sdcasr;
@@ -292,7 +304,8 @@
 
 static int __init pas_cpufreq_init(void)
 {
-       if (!machine_is_compatible("PA6T-1682M"))
+       if (!machine_is_compatible("PA6T-1682M") &&
+           !machine_is_compatible("pasemi,pwrficient"))
                return -ENODEV;
 
        return cpufreq_register_driver(&pas_cpufreq_driver);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/electra_ide.c powerpc.git/arch/powerpc/platforms/pasemi/electra_ide.c
--- linux-2.6.24/arch/powerpc/platforms/pasemi/electra_ide.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/electra_ide.c     1970-01-01 01:00:00.000000000 +0100
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2007 PA Semi, Inc
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/prom.h>
-#include <asm/system.h>
-
-/* The electra IDE interface is incredibly simple: Just a device on the localbus
- * with interrupts hooked up to one of the GPIOs. The device tree contains the
- * address window and interrupt mappings already, and the pata_platform driver handles
- * the rest. We just need to hook the two up.
- */
-
-#define MAX_IFS        4       /* really, we have only one */
-
-static struct platform_device *pdevs[MAX_IFS];
-
-static int __devinit electra_ide_init(void)
-{
-       struct device_node *np;
-       struct resource r[3];
-       int ret = 0;
-       int i;
-
-       np = of_find_compatible_node(NULL, "ide", "electra-ide");
-       i = 0;
-
-       while (np && i < MAX_IFS) {
-               memset(r, 0, sizeof(r));
-
-               /* pata_platform wants two address ranges: one for the base registers,
-                * another for the control (altstatus). It's located at offset 0x3f6 in
-                * the window, but the device tree only has one large register window
-                * that covers both ranges. So we need to split it up by hand here:
-                */
-
-               ret = of_address_to_resource(np, 0, &r[0]);
-               if (ret)
-                       goto out;
-               ret = of_address_to_resource(np, 0, &r[1]);
-               if (ret)
-                       goto out;
-
-               r[1].start += 0x3f6;
-               r[0].end = r[1].start-1;
-
-               r[2].start = irq_of_parse_and_map(np, 0);
-               r[2].end = irq_of_parse_and_map(np, 0);
-               r[2].flags = IORESOURCE_IRQ;
-
-               pr_debug("registering platform device at 0x%lx/0x%lx, irq is %ld\n",
-                        r[0].start, r[1].start, r[2].start);
-               pdevs[i] = platform_device_register_simple("pata_platform", i, r, 3);
-               if (IS_ERR(pdevs[i])) {
-                       ret = PTR_ERR(pdevs[i]);
-                       pdevs[i] = NULL;
-                       goto out;
-               }
-               np = of_find_compatible_node(np, "ide", "electra-ide");
-       }
-out:
-       return ret;
-}
-module_init(electra_ide_init);
-
-static void __devexit electra_ide_exit(void)
-{
-       int i;
-
-       for (i = 0; i < MAX_IFS; i++)
-               if (pdevs[i])
-                       platform_device_unregister(pdevs[i]);
-}
-module_exit(electra_ide_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
-MODULE_DESCRIPTION("PA Semi Electra IDE driver");
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/gpio_mdio.c powerpc.git/arch/powerpc/platforms/pasemi/gpio_mdio.c
--- linux-2.6.24/arch/powerpc/platforms/pasemi/gpio_mdio.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/gpio_mdio.c       2008-01-28 20:25:49.000000000 +0100
@@ -30,7 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_platform.h>
 
 #define DELAY 1
 
@@ -218,45 +218,27 @@
                                     const struct of_device_id *match)
 {
        struct device *dev = &ofdev->dev;
-       struct device_node *np = ofdev->node;
-       struct device_node *gpio_np;
+       struct device_node *phy_dn, *np = ofdev->node;
        struct mii_bus *new_bus;
-       struct resource res;
        struct gpio_priv *priv;
        const unsigned int *prop;
-       int err = 0;
+       int err;
        int i;
 
-       gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
-
-       if (!gpio_np)
-               return -ENODEV;
-
-       err = of_address_to_resource(gpio_np, 0, &res);
-       of_node_put(gpio_np);
-
-       if (err)
-               return -EINVAL;
-
-       if (!gpio_regs)
-               gpio_regs = ioremap(res.start, 0x100);
-
-       if (!gpio_regs)
-               return -EPERM;
-
+       err = -ENOMEM;
        priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
-       if (priv == NULL)
-               return -ENOMEM;
+       if (!priv)
+               goto out;
 
        new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
 
-       if (new_bus == NULL)
-               return -ENOMEM;
+       if (!new_bus)
+               goto out_free_priv;
 
-       new_bus->name = "pasemi gpio mdio bus",
-       new_bus->read = &gpio_mdio_read,
-       new_bus->write = &gpio_mdio_write,
-       new_bus->reset = &gpio_mdio_reset,
+       new_bus->name = "pasemi gpio mdio bus";
+       new_bus->read = &gpio_mdio_read;
+       new_bus->write = &gpio_mdio_write;
+       new_bus->reset = &gpio_mdio_reset;
 
        prop = of_get_property(np, "reg", NULL);
        new_bus->id = *prop;
@@ -265,9 +247,24 @@
        new_bus->phy_mask = 0;
 
        new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-       for(i = 0; i < PHY_MAX_ADDR; ++i)
-               new_bus->irq[i] = irq_create_mapping(NULL, 10);
 
+       if (!new_bus->irq)
+               goto out_free_bus;
+
+       for (i = 0; i < PHY_MAX_ADDR; i++)
+               new_bus->irq[i] = NO_IRQ;
+
+       for (phy_dn = of_get_next_child(np, NULL);
+            phy_dn != NULL;
+            phy_dn = of_get_next_child(np, phy_dn)) {
+               const unsigned int *ip, *regp;
+
+               ip = of_get_property(phy_dn, "interrupts", NULL);
+               regp = of_get_property(phy_dn, "reg", NULL);
+               if (!ip || !regp || *regp >= PHY_MAX_ADDR)
+                       continue;
+               new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
+       }
 
        prop = of_get_property(np, "mdc-pin", NULL);
        priv->mdc_pin = *prop;
@@ -280,17 +277,21 @@
 
        err = mdiobus_register(new_bus);
 
-       if (0 != err) {
+       if (err != 0) {
                printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
                                new_bus->name, err);
-               goto bus_register_fail;
+               goto out_free_irq;
        }
 
        return 0;
 
-bus_register_fail:
+out_free_irq:
+       kfree(new_bus->irq);
+out_free_bus:
        kfree(new_bus);
-
+out_free_priv:
+       kfree(priv);
+out:
        return err;
 }
 
@@ -317,6 +318,7 @@
        },
        {},
 };
+MODULE_DEVICE_TABLE(of, gpio_mdio_match);
 
 static struct of_platform_driver gpio_mdio_driver =
 {
@@ -330,12 +332,32 @@
 
 int gpio_mdio_init(void)
 {
+       struct device_node *np;
+
+       np = of_find_compatible_node(NULL, NULL, "1682m-gpio");
+       if (!np)
+               np = of_find_compatible_node(NULL, NULL,
+                                            "pasemi,pwrficient-gpio");
+       if (!np)
+               return -ENODEV;
+       gpio_regs = of_iomap(np, 0);
+       of_node_put(np);
+
+       if (!gpio_regs)
+               return -ENODEV;
+
        return of_register_platform_driver(&gpio_mdio_driver);
 }
+module_init(gpio_mdio_init);
 
 void gpio_mdio_exit(void)
 {
        of_unregister_platform_driver(&gpio_mdio_driver);
+       if (gpio_regs)
+               iounmap(gpio_regs);
 }
-device_initcall(gpio_mdio_init);
+module_exit(gpio_mdio_exit);
 
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
+MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards");
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/idle.c powerpc.git/arch/powerpc/platforms/pasemi/idle.c
--- linux-2.6.24/arch/powerpc/platforms/pasemi/idle.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/idle.c    2008-01-28 20:25:49.000000000 +0100
@@ -74,9 +74,6 @@
 
 static int __init pasemi_idle_init(void)
 {
-       if (!machine_is(pasemi))
-               return -ENODEV;
-
 #ifndef CONFIG_PPC_PASEMI_CPUFREQ
        printk(KERN_WARNING "No cpufreq driver, powersavings modes disabled\n");
        current_mode = 0;
@@ -88,7 +85,7 @@
 
        return 0;
 }
-late_initcall(pasemi_idle_init);
+machine_late_initcall(pasemi, pasemi_idle_init);
 
 static int __init idle_param(char *p)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/pasemi.h powerpc.git/arch/powerpc/platforms/pasemi/pasemi.h
--- linux-2.6.24/arch/powerpc/platforms/pasemi/pasemi.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/pasemi.h  2008-01-28 20:25:49.000000000 +0100
@@ -16,8 +16,14 @@
 
 /* Restore astate to last set */
 #ifdef CONFIG_PPC_PASEMI_CPUFREQ
+extern int check_astate(void);
 extern void restore_astate(int cpu);
 #else
+static inline int check_astate(void)
+{
+       /* Always return >0 so we never power save */
+       return 1;
+}
 static inline void restore_astate(int cpu)
 {
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/powersave.S powerpc.git/arch/powerpc/platforms/pasemi/powersave.S
--- linux-2.6.24/arch/powerpc/platforms/pasemi/powersave.S      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/powersave.S       2008-01-28 20:25:49.000000000 +0100
@@ -62,7 +62,16 @@
        mflr    r0
        std     r0, 16(r1)
        stdu    r1,-64(r1)
+#ifdef CONFIG_PPC_PASEMI_CPUFREQ
+       std     r3, 48(r1)
 
+       /* Only do power savings when in astate 0 */
+       bl      .check_astate
+       cmpwi   r3,0
+       bne     1f
+
+       ld      r3, 48(r1)
+#endif
        LOAD_REG_IMMEDIATE(r6,MSR_DR|MSR_IR|MSR_ME|MSR_EE)
        mfmsr   r4
        andc    r5,r4,r6
@@ -73,7 +82,7 @@
 
        mtmsrd  r4,0
 
-       addi    r1,r1,64
+1:     addi    r1,r1,64
        ld      r0,16(r1)
        mtlr    r0
        blr
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pasemi/setup.c powerpc.git/arch/powerpc/platforms/pasemi/setup.c
--- linux-2.6.24/arch/powerpc/platforms/pasemi/setup.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pasemi/setup.c   2008-01-28 20:25:49.000000000 +0100
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/console.h>
 #include <linux/pci.h>
+#include <linux/of_platform.h>
 
 #include <asm/prom.h>
 #include <asm/system.h>
@@ -35,7 +36,7 @@
 #include <asm/mpic.h>
 #include <asm/smp.h>
 #include <asm/time.h>
-#include <asm/of_platform.h>
+#include <asm/mmu.h>
 
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
@@ -43,6 +44,10 @@
 
 #include "pasemi.h"
 
+#if !defined(CONFIG_SMP)
+static void smp_send_stop(void) {}
+#endif
+
 /* SDC reset register, must be pre-mapped at reset time */
 static void __iomem *reset_reg;
 
@@ -56,10 +61,14 @@
 
 static struct mce_regs mce_regs[MAX_MCE_REGS];
 static int num_mce_regs;
+static int nmi_virq = NO_IRQ;
 
 
 static void pas_restart(char *cmd)
 {
+       /* Need to put others cpu in hold loop so they're not sleeping */
+       smp_send_stop();
+       udelay(10000);
        printk("Restarting...\n");
        while (1)
                out_le32(reset_reg, 0x6000000);
@@ -126,9 +135,6 @@
        struct pci_dev *dev;
        int reg;
 
-       if (!machine_is(pasemi))
-               return -ENODEV;
-
        /* Remap various SoC status registers for use by the MCE handler */
 
        reg = 0;
@@ -172,7 +178,7 @@
 
        return 0;
 }
-device_initcall(pas_setup_mce_regs);
+machine_device_initcall(pasemi, pas_setup_mce_regs);
 
 static __init void pas_init_IRQ(void)
 {
@@ -181,6 +187,8 @@
        unsigned long openpic_addr;
        const unsigned int *opprop;
        int naddr, opplen;
+       int mpic_flags;
+       const unsigned int *nmiprop;
        struct mpic *mpic;
 
        mpic_node = NULL;
@@ -213,13 +221,26 @@
        openpic_addr = of_read_number(opprop, naddr);
        printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 
+       mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
+
+       nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
+       if (nmiprop)
+               mpic_flags |= MPIC_ENABLE_MCK;
+
        mpic = mpic_alloc(mpic_node, openpic_addr,
-                         MPIC_PRIMARY|MPIC_LARGE_VECTORS,
-                         0, 0, " PAS-OPIC  ");
+                         mpic_flags, 0, 0, "PASEMI-OPIC");
        BUG_ON(!mpic);
 
        mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
        mpic_init(mpic);
+       /* The NMI/MCK source needs to be prio 15 */
+       if (nmiprop) {
+               nmi_virq = irq_create_mapping(NULL, *nmiprop);
+               mpic_irq_set_priority(nmi_virq, 15);
+               set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING);
+               mpic_unmask_irq(nmi_virq);
+       }
+
        of_node_put(mpic_node);
        of_node_put(root);
 }
@@ -239,6 +260,14 @@
 
        srr0 = regs->nip;
        srr1 = regs->msr;
+
+       if (nmi_virq != NO_IRQ && mpic_get_mcirq() == nmi_virq) {
+               printk(KERN_ERR "NMI delivered\n");
+               debugger(regs);
+               mpic_end_irq(nmi_virq);
+               goto out;
+       }
+
        dsisr = mfspr(SPRN_DSISR);
        printk(KERN_ERR "Machine Check on CPU %d\n", cpu);
        printk(KERN_ERR "SRR0  0x%016lx SRR1 0x%016lx\n", srr0, srr1);
@@ -295,14 +324,14 @@
                int i;
 
                printk(KERN_ERR "slb contents:\n");
-               for (i = 0; i < SLB_NUM_ENTRIES; i++) {
+               for (i = 0; i < mmu_slb_size; i++) {
                        asm volatile("slbmfee  %0,%1" : "=r" (e) : "r" (i));
                        asm volatile("slbmfev  %0,%1" : "=r" (v) : "r" (i));
                        printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v);
                }
        }
 
-
+out:
        /* SRR1[62] is from MSR[62] if recoverable, so pass that back */
        return !!(srr1 & 0x2);
 }
@@ -362,16 +391,17 @@
 
 
 static struct of_device_id pasemi_bus_ids[] = {
+       /* Unfortunately needed for legacy firmwares */
        { .type = "localbus", },
        { .type = "sdc", },
+       /* These are the proper entries, which newer firmware uses */
+       { .compatible = "pasemi,localbus", },
+       { .compatible = "pasemi,sdc", },
        {},
 };
 
 static int __init pasemi_publish_devices(void)
 {
-       if (!machine_is(pasemi))
-               return 0;
-
        pasemi_pcmcia_init();
 
        /* Publish OF platform devices for SDC and other non-PCI devices */
@@ -379,7 +409,7 @@
 
        return 0;
 }
-device_initcall(pasemi_publish_devices);
+machine_device_initcall(pasemi, pasemi_publish_devices);
 
 
 /*
@@ -389,7 +419,8 @@
 {
        unsigned long root = of_get_flat_dt_root();
 
-       if (!of_flat_dt_is_compatible(root, "PA6T-1682M"))
+       if (!of_flat_dt_is_compatible(root, "PA6T-1682M") &&
+           !of_flat_dt_is_compatible(root, "pasemi,pwrficient"))
                return 0;
 
        hpte_init_native();
@@ -400,7 +431,7 @@
 }
 
 define_machine(pasemi) {
-       .name                   = "PA Semi PA6T-1682M",
+       .name                   = "PA Semi PWRficient",
        .probe                  = pas_probe,
        .setup_arch             = pas_setup_arch,
        .init_early             = pas_init_early,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/powermac/low_i2c.c powerpc.git/arch/powerpc/platforms/powermac/low_i2c.c
--- linux-2.6.24/arch/powerpc/platforms/powermac/low_i2c.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/powermac/low_i2c.c       2008-01-28 20:25:49.000000000 +0100
@@ -585,8 +585,7 @@
        struct device_node *np, *child, *parent;
 
        /* Probe keywest-i2c busses */
-       for (np = NULL;
-            (np = of_find_compatible_node(np, "i2c","keywest-i2c")) != NULL;){
+       for_each_compatible_node(np, "i2c","keywest-i2c") {
                struct pmac_i2c_host_kw *host;
                int multibus, chans, i;
 
@@ -1462,9 +1461,6 @@
                return 0;
        i2c_inited = 1;
 
-       if (!machine_is(powermac))
-               return 0;
-
        /* Probe keywest-i2c busses */
        kw_i2c_probe();
 
@@ -1483,7 +1479,7 @@
 
        return 0;
 }
-arch_initcall(pmac_i2c_init);
+machine_arch_initcall(powermac, pmac_i2c_init);
 
 /* Since pmac_i2c_init can be called too early for the platform device
  * registration, we need to do it at a later time. In our case, subsys
@@ -1515,4 +1511,4 @@
 
        return 0;
 }
-subsys_initcall(pmac_i2c_create_platform_devices);
+machine_subsys_initcall(powermac, pmac_i2c_create_platform_devices);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/powermac/pci.c powerpc.git/arch/powerpc/platforms/powermac/pci.c
--- linux-2.6.24/arch/powerpc/platforms/powermac/pci.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/powermac/pci.c   2008-01-28 20:25:49.000000000 +0100
@@ -40,8 +40,6 @@
 static int has_uninorth;
 #ifdef CONFIG_PPC64
 static struct pci_controller *u3_agp;
-static struct pci_controller *u4_pcie;
-static struct pci_controller *u3_ht;
 #else
 static int has_second_ohare;
 #endif /* CONFIG_PPC64 */
@@ -314,12 +312,15 @@
 
        /* We only allow config cycles to devices that are in OF device-tree
         * as we are apparently having some weird things going on with some
-        * revs of K2 on recent G5s
+        * revs of K2 on recent G5s, except for the host bridge itself, which
+        * is missing from the tree but we know we can probe.
         */
        if (bus->self)
                busdn = pci_device_to_OF_node(bus->self);
+       else if (devfn == 0)
+               return 0;
        else
-               busdn = hose->arch_data;
+               busdn = hose->dn;
        for (dn = busdn->child; dn; dn = dn->sibling)
                if (PCI_DN(dn) && PCI_DN(dn)->devfn == devfn)
                        break;
@@ -344,14 +345,15 @@
                + (((unsigned int)bus) << 16) \
                + 0x01000000UL)
 
-static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
-                                            u8 bus, u8 devfn, u8 offset)
+static void __iomem *u3_ht_cfg_access(struct pci_controller *hose, u8 bus,
+                                     u8 devfn, u8 offset, int *swap)
 {
+       *swap = 1;
        if (bus == hose->first_busno) {
-               /* For now, we don't self probe U3 HT bridge */
-               if (PCI_SLOT(devfn) == 0)
-                       return NULL;
-               return hose->cfg_data + U3_HT_CFA0(devfn, offset);
+               if (devfn != 0)
+                       return hose->cfg_data + U3_HT_CFA0(devfn, offset);
+               *swap = 0;
+               return ((void __iomem *)hose->cfg_addr) + (offset << 2);
        } else
                return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
 }
@@ -360,14 +362,15 @@
                                    int offset, int len, u32 *val)
 {
        struct pci_controller *hose;
-       volatile void __iomem *addr;
+       void __iomem *addr;
+       int swap;
 
        hose = pci_bus_to_host(bus);
        if (hose == NULL)
                return PCIBIOS_DEVICE_NOT_FOUND;
        if (offset >= 0x100)
                return  PCIBIOS_BAD_REGISTER_NUMBER;
-       addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+       addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap);
        if (!addr)
                return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -397,10 +400,10 @@
                *val = in_8(addr);
                break;
        case 2:
-               *val = in_le16(addr);
+               *val = swap ? in_le16(addr) : in_be16(addr);
                break;
        default:
-               *val = in_le32(addr);
+               *val = swap ? in_le32(addr) : in_be32(addr);
                break;
        }
        return PCIBIOS_SUCCESSFUL;
@@ -410,14 +413,15 @@
                                     int offset, int len, u32 val)
 {
        struct pci_controller *hose;
-       volatile void __iomem *addr;
+       void __iomem *addr;
+       int swap;
 
        hose = pci_bus_to_host(bus);
        if (hose == NULL)
                return PCIBIOS_DEVICE_NOT_FOUND;
        if (offset >= 0x100)
                return  PCIBIOS_BAD_REGISTER_NUMBER;
-       addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+       addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap);
        if (!addr)
                return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -439,10 +443,10 @@
                out_8(addr, val);
                break;
        case 2:
-               out_le16(addr, val);
+               swap ? out_le16(addr, val) : out_be16(addr, val);
                break;
        default:
-               out_le32((u32 __iomem *)addr, val);
+               swap ? out_le32(addr, val) : out_be32(addr, val);
                break;
        }
        return PCIBIOS_SUCCESSFUL;
@@ -725,7 +729,7 @@
 static int __init setup_uninorth(struct pci_controller *hose,
                                 struct resource *addr)
 {
-       pci_assign_all_buses = 1;
+       ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
        has_uninorth = 1;
        hose->ops = &macrisc_pci_ops;
        hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
@@ -773,31 +777,72 @@
         */
        hose->first_busno = 0x00;
        hose->last_busno = 0xff;
-       u4_pcie = hose;
 }
 
-static void __init setup_u3_ht(struct pci_controller* hose)
+static void __init parse_region_decode(struct pci_controller *hose,
+                                      u32 decode)
 {
-       struct device_node *np = (struct device_node *)hose->arch_data;
-       struct pci_controller *other = NULL;
-       int i, cur;
+       unsigned long base, end, next = -1;
+       int i, cur = -1;
 
+       /* Iterate through all bits. We ignore the last bit as this region is
+        * reserved for the ROM among other niceties
+        */
+       for (i = 0; i < 31; i++) {
+               if ((decode & (0x80000000 >> i)) == 0)
+                       continue;
+               if (i < 16) {
+                       base = 0xf0000000 | (((u32)i) << 24);
+                       end = base + 0x00ffffff;
+               } else {
+                       base = ((u32)i-16) << 28;
+                       end = base + 0x0fffffff;
+               }
+               if (base != next) {
+                       if (++cur >= 3) {
+                               printk(KERN_WARNING "PCI: Too many ranges !\n");
+                               break;
+                       }
+                       hose->mem_resources[cur].flags = IORESOURCE_MEM;
+                       hose->mem_resources[cur].name = hose->dn->full_name;
+                       hose->mem_resources[cur].start = base;
+                       hose->mem_resources[cur].end = end;
+                       DBG("  %d: 0x%08lx-0x%08lx\n", cur, base, end);
+               } else {
+                       DBG("   :           -0x%08lx\n", end);
+                       hose->mem_resources[cur].end = end;
+               }
+               next = end + 1;
+       }
+}
+
+static void __init setup_u3_ht(struct pci_controller* hose)
+{
+       struct device_node *np = hose->dn;
+       struct resource cfg_res, self_res;
+       u32 decode;
 
        hose->ops = &u3_ht_pci_ops;
 
-       /* We hard code the address because of the different size of
-        * the reg address cell, we shall fix that by killing struct
-        * reg_property and using some accessor functions instead
+       /* Get base addresses from OF tree
         */
-       hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+       if (of_address_to_resource(np, 0, &cfg_res) ||
+           of_address_to_resource(np, 1, &self_res)) {
+               printk(KERN_ERR "PCI: Failed to get U3/U4 HT resources !\n");
+               return;
+       }
+
+       /* Map external cfg space access into cfg_data and self registers
+        * into cfg_addr
+        */
+       hose->cfg_data = ioremap(cfg_res.start, 0x02000000);
+       hose->cfg_addr = ioremap(self_res.start,
+                                self_res.end - self_res.start + 1);
 
        /*
-        * /ht node doesn't expose a "ranges" property, so we "remove"
-        * regions that have been allocated to AGP. So far, this version of
-        * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions
-        * to /ht. We need to fix that sooner or later by either parsing all
-        * child "ranges" properties or figuring out the U3 address space
-        * decoding logic and then read its configuration register (if any).
+        * /ht node doesn't expose a "ranges" property, we read the register
+        * that controls the decoding logic and use that for memory regions.
+        * The IO region is hard coded since it is fixed in HW as well.
         */
        hose->io_base_phys = 0xf4000000;
        hose->pci_io_size = 0x00400000;
@@ -808,76 +853,33 @@
        hose->pci_mem_offset = 0;
        hose->first_busno = 0;
        hose->last_busno = 0xef;
-       hose->mem_resources[0].name = np->full_name;
-       hose->mem_resources[0].start = 0x80000000;
-       hose->mem_resources[0].end = 0xefffffff;
-       hose->mem_resources[0].flags = IORESOURCE_MEM;
-
-       u3_ht = hose;
-
-       if (u3_agp != NULL)
-               other = u3_agp;
-       else if (u4_pcie != NULL)
-               other = u4_pcie;
 
-       if (other == NULL) {
-               DBG("U3/4 has no AGP/PCIE, using full resource range\n");
-               return;
-       }
+       /* Note: fix offset when cfg_addr becomes a void * */
+       decode = in_be32(hose->cfg_addr + 0x80);
 
-       /* Fixup bus range vs. PCIE */
-       if (u4_pcie)
-               hose->last_busno = u4_pcie->first_busno - 1;
-
-       /* We "remove" the AGP resources from the resources allocated to HT,
-        * that is we create "holes". However, that code does assumptions
-        * that so far happen to be true (cross fingers...), typically that
-        * resources in the AGP node are properly ordered
-        */
-       cur = 0;
-       for (i=0; i<3; i++) {
-               struct resource *res = &other->mem_resources[i];
-               if (res->flags != IORESOURCE_MEM)
-                       continue;
-               /* We don't care about "fine" resources */
-               if (res->start >= 0xf0000000)
-                       continue;
-               /* Check if it's just a matter of "shrinking" us in one
-                * direction
-                */
-               if (hose->mem_resources[cur].start == res->start) {
-                       DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
-                           cur, hose->mem_resources[cur].start,
-                           res->end + 1);
-                       hose->mem_resources[cur].start = res->end + 1;
-                       continue;
-               }
-               if (hose->mem_resources[cur].end == res->end) {
-                       DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
-                           cur, hose->mem_resources[cur].end,
-                           res->start - 1);
-                       hose->mem_resources[cur].end = res->start - 1;
-                       continue;
-               }
-               /* No, it's not the case, we need a hole */
-               if (cur == 2) {
-                       /* not enough resources for a hole, we drop part
-                        * of the range
-                        */
-                       printk(KERN_WARNING "Running out of resources"
-                              " for /ht host !\n");
-                       hose->mem_resources[cur].end = res->start - 1;
-                       continue;
-               }
-               cur++;
-               DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
-                   cur-1, res->start - 1, cur, res->end + 1);
-               hose->mem_resources[cur].name = np->full_name;
-               hose->mem_resources[cur].flags = IORESOURCE_MEM;
-               hose->mem_resources[cur].start = res->end + 1;
-               hose->mem_resources[cur].end = hose->mem_resources[cur-1].end;
-               hose->mem_resources[cur-1].end = res->start - 1;
-       }
+       DBG("PCI: Apple HT bridge decode register: 0x%08x\n", decode);
+
+       /* NOTE: The decode register setup is a bit weird... region
+        * 0xf8000000 for example is marked as enabled in there while it's
+        & actually the memory controller registers.
+        * That means that we are incorrectly attributing it to HT.
+        *
+        * In a similar vein, region 0xf4000000 is actually the HT IO space but
+        * also marked as enabled in here and 0xf9000000 is used by some other
+        * internal bits of the northbridge.
+        *
+        * Unfortunately, we can't just mask out those bit as we would end
+        * up with more regions than we can cope (linux can only cope with
+        * 3 memory regions for a PHB at this stage).
+        *
+        * So for now, we just do a little hack. We happen to -know- that
+        * Apple firmware doesn't assign things below 0xfa000000 for that
+        * bridge anyway so we mask out all bits we don't want.
+        */
+       decode &= 0x003fffff;
+
+       /* Now parse the resulting bits and build resources */
+       parse_region_decode(hose, decode);
 }
 #endif /* CONFIG_PPC64 */
 
@@ -994,6 +996,8 @@
        struct device_node *np, *root;
        struct device_node *ht = NULL;
 
+       ppc_pci_flags = PPC_PCI_CAN_SKIP_ISA_ALIGN;
+
        root = of_find_node_by_path("/");
        if (root == NULL) {
                printk(KERN_CRIT "pmac_pci_init: can't find root "
@@ -1032,15 +1036,15 @@
         * future though
         */
        if (u3_agp) {
-               struct device_node *np = u3_agp->arch_data;
+               struct device_node *np = u3_agp->dn;
                PCI_DN(np)->busno = 0xf0;
                for (np = np->child; np; np = np->sibling)
                        PCI_DN(np)->busno = 0xf0;
        }
        /* pmac_check_ht_link(); */
 
-       /* Tell pci.c to not use the common resource allocation mechanism */
-       pci_probe_only = 1;
+       /* We can allocate missing resources if any */
+       pci_probe_only = 0;
 
 #else /* CONFIG_PPC64 */
        init_p2pbridge();
@@ -1051,13 +1055,13 @@
         * some offset between bus number and domains for now when we
         * assign all busses should help for now
         */
-       if (pci_assign_all_buses)
+       if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_BUS)
                pcibios_assign_bus_offset = 0x10;
 #endif
 }
 
-int
-pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
+#ifdef CONFIG_PPC32
+int pmac_pci_enable_device_hook(struct pci_dev *dev)
 {
        struct device_node* node;
        int updatecfg = 0;
@@ -1099,24 +1103,21 @@
                updatecfg = 1;
        }
 
+       /*
+        * Fixup various header fields on 32 bits. We don't do that on
+        * 64 bits as some of these have strange values behind the HT
+        * bridge and we must not, for example, enable MWI or set the
+        * cache line size on them.
+        */
        if (updatecfg) {
                u16 cmd;
 
-               /*
-                * Make sure PCI is correctly configured
-                *
-                * We use old pci_bios versions of the function since, by
-                * default, gmac is not powered up, and so will be absent
-                * from the kernel initial PCI lookup.
-                *
-                * Should be replaced by 2.4 new PCI mechanisms and really
-                * register the device.
-                */
                pci_read_config_word(dev, PCI_COMMAND, &cmd);
                cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
                        | PCI_COMMAND_INVALIDATE;
                pci_write_config_word(dev, PCI_COMMAND, cmd);
                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
+
                pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
                                      L1_CACHE_BYTES >> 2);
        }
@@ -1124,6 +1125,18 @@
        return 0;
 }
 
+void __devinit pmac_pci_fixup_ohci(struct pci_dev *dev)
+{
+       struct device_node *node = pci_device_to_OF_node(dev);
+
+       /* We don't want to assign resources to USB controllers
+        * absent from the OF tree (iBook second controller)
+        */
+       if (dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node)
+               dev->resource[0].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_ANY_ID, pmac_pci_fixup_ohci);
+
 /* We power down some devices after they have been probed. They'll
  * be powered back on later on
  */
@@ -1171,7 +1184,6 @@
        of_node_put(nd);
 }
 
-#ifdef CONFIG_PPC32
 void pmac_pci_fixup_cardbus(struct pci_dev* dev)
 {
        if (!machine_is(powermac))
@@ -1259,7 +1271,7 @@
        }
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
-#endif
+#endif /* CONFIG_PPC32 */
 
 /*
  * Disable second function on K2-SATA, it's broken
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/powermac/pfunc_base.c powerpc.git/arch/powerpc/platforms/powermac/pfunc_base.c
--- linux-2.6.24/arch/powerpc/platforms/powermac/pfunc_base.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/powermac/pfunc_base.c    2008-01-28 20:25:49.000000000 +0100
@@ -363,8 +363,7 @@
 
        return 0;
 }
-
-arch_initcall(pmac_pfunc_base_install);
+machine_arch_initcall(powermac, pmac_pfunc_base_install);
 
 #ifdef CONFIG_PM
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/powermac/pic.c powerpc.git/arch/powerpc/platforms/powermac/pic.c
--- linux-2.6.24/arch/powerpc/platforms/powermac/pic.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/powermac/pic.c   2008-01-28 20:25:49.000000000 +0100
@@ -690,6 +690,5 @@
        sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
        return 0;
 }
-
-subsys_initcall(init_pmacpic_sysfs);
+machine_subsys_initcall(powermac, init_pmacpic_sysfs);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/powermac/pmac.h powerpc.git/arch/powerpc/platforms/powermac/pmac.h
--- linux-2.6.24/arch/powerpc/platforms/powermac/pmac.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/powermac/pmac.h  2008-01-28 20:25:49.000000000 +0100
@@ -26,7 +26,7 @@
 extern void pmac_nvram_update(void);
 extern unsigned char pmac_nvram_read_byte(int addr);
 extern void pmac_nvram_write_byte(int addr, unsigned char val);
-extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial);
+extern int pmac_pci_enable_device_hook(struct pci_dev *dev);
 extern void pmac_pcibios_after_init(void);
 extern int of_show_percpuinfo(struct seq_file *m, int i);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/powermac/setup.c powerpc.git/arch/powerpc/platforms/powermac/setup.c
--- linux-2.6.24/arch/powerpc/platforms/powermac/setup.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/powermac/setup.c 2008-01-28 20:25:49.000000000 +0100
@@ -51,6 +51,8 @@
 #include <linux/root_dev.h>
 #include <linux/bitops.h>
 #include <linux/suspend.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/reg.h>
 #include <asm/sections.h>
@@ -68,8 +70,6 @@
 #include <asm/btext.h>
 #include <asm/pmac_feature.h>
 #include <asm/time.h>
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
 #include <asm/mmu_context.h>
 #include <asm/iommu.h>
 #include <asm/smu.h>
@@ -94,7 +94,6 @@
 #define DEFAULT_ROOT_DEVICE Root_SDA1  /* sda1 - slightly silly choice */
 
 #ifdef CONFIG_PPC64
-#include <asm/udbg.h>
 int sccdbg;
 #endif
 
@@ -398,17 +397,13 @@
 
 static int pmac_late_init(void)
 {
-       if (!machine_is(powermac))
-               return -ENODEV;
-
        initializing = 0;
        /* this is udbg (which is __init) and we can later use it during
         * cpu hotplug (in smp_core99_kick_cpu) */
        ppc_md.progress = NULL;
        return 0;
 }
-
-late_initcall(pmac_late_init);
+machine_late_initcall(powermac, pmac_late_init);
 
 /*
  * This is __init_refok because we check for "initializing" before
@@ -535,9 +530,6 @@
        if (machine_is(chrp))
                return -1;
 
-       if (!machine_is(powermac))
-               return 0;
-
        np = of_find_node_by_name(NULL, "valkyrie");
        if (np)
                of_platform_device_create(np, "valkyrie", NULL);
@@ -552,8 +544,7 @@
 
        return 0;
 }
-
-device_initcall(pmac_declare_of_platform_devices);
+machine_device_initcall(powermac, pmac_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -613,9 +604,11 @@
 
        /* We need to use normal PCI probing for the AGP bus,
         * since the device for the AGP bridge isn't in the tree.
+        * Same for the PCIe host on U4 and the HT host bridge.
         */
        if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
-                                 of_device_is_compatible(node, "u4-pcie")))
+                                 of_device_is_compatible(node, "u4-pcie") ||
+                                 of_device_is_compatible(node, "u3-ht")))
                return PCI_PROBE_NORMAL;
        return PCI_PROBE_DEVTREE;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/powermac/time.c powerpc.git/arch/powerpc/platforms/powermac/time.c
--- linux-2.6.24/arch/powerpc/platforms/powermac/time.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/powermac/time.c  2008-01-28 20:25:49.000000000 +0100
@@ -84,12 +84,14 @@
        return delta;
 }
 
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
 static void to_rtc_time(unsigned long now, struct rtc_time *tm)
 {
        to_tm(now, tm);
        tm->tm_year -= 1900;
        tm->tm_mon -= 1;
 }
+#endif
 
 static unsigned long from_rtc_time(struct rtc_time *tm)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/ps3/Kconfig powerpc.git/arch/powerpc/platforms/ps3/Kconfig
--- linux-2.6.24/arch/powerpc/platforms/ps3/Kconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/ps3/Kconfig      2008-01-28 20:25:49.000000000 +0100
@@ -61,17 +61,6 @@
          This support is mainly for Linux kernel development.  If unsure,
          say N.
 
-config PS3_USE_LPAR_ADDR
-       depends on PPC_PS3 && EXPERIMENTAL
-       bool "PS3 use lpar address space"
-       default y
-       help
-         This option is solely for experimentation by experts.  Disables
-         translation of lpar addresses.  SPE support currently won't work
-         without this set to y.
-
-         If you have any doubt, choose the default y.
-
 config PS3_VUART
        depends on PPC_PS3
        tristate
@@ -138,4 +127,17 @@
          be disabled on the kernel command line using "ps3flash=off", to
          not allocate this fixed buffer.
 
+config PS3_LPM
+       tristate "PS3 Logical Performance Monitor support"
+       depends on PPC_PS3
+       help
+         Include support for the PS3 Logical Performance Monitor.
+
+         This support is required to use the logical performance monitor
+         of the PS3's LV1 hypervisor.
+
+         If you intend to use the advanced performance monitoring and
+         profiling support of the Cell processor with programs like
+         oprofile and perfmon2, then say Y or M, otherwise say N.
+
 endmenu
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/ps3/device-init.c powerpc.git/arch/powerpc/platforms/ps3/device-init.c
--- linux-2.6.24/arch/powerpc/platforms/ps3/device-init.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/ps3/device-init.c        2008-01-28 20:25:49.000000000 +0100
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/kthread.h>
 #include <linux/init.h>
+#include <linux/reboot.h>
 
 #include <asm/firmware.h>
 #include <asm/lv1call.h>
@@ -30,6 +31,89 @@
 
 #include "platform.h"
 
+static int __init ps3_register_lpm_devices(void)
+{
+       int result;
+       u64 tmp1;
+       u64 tmp2;
+       struct ps3_system_bus_device *dev;
+
+       pr_debug(" -> %s:%d\n", __func__, __LINE__);
+
+       dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+       if (!dev)
+               return -ENOMEM;
+
+       dev->match_id = PS3_MATCH_ID_LPM;
+       dev->dev_type = PS3_DEVICE_TYPE_LPM;
+
+       /* The current lpm driver only supports a single BE processor. */
+
+       result = ps3_repository_read_be_node_id(0, &dev->lpm.node_id);
+
+       if (result) {
+               pr_debug("%s:%d: ps3_repository_read_be_node_id failed \n",
+                       __func__, __LINE__);
+               goto fail_read_repo;
+       }
+
+       result = ps3_repository_read_lpm_privileges(dev->lpm.node_id, &tmp1,
+               &dev->lpm.rights);
+
+       if (result) {
+               pr_debug("%s:%d: ps3_repository_read_lpm_privleges failed \n",
+                       __func__, __LINE__);
+               goto fail_read_repo;
+       }
+
+       lv1_get_logical_partition_id(&tmp2);
+
+       if (tmp1 != tmp2) {
+               pr_debug("%s:%d: wrong lpar\n",
+                       __func__, __LINE__);
+               result = -ENODEV;
+               goto fail_rights;
+       }
+
+       if (!(dev->lpm.rights & PS3_LPM_RIGHTS_USE_LPM)) {
+               pr_debug("%s:%d: don't have rights to use lpm\n",
+                       __func__, __LINE__);
+               result = -EPERM;
+               goto fail_rights;
+       }
+
+       pr_debug("%s:%d: pu_id %lu, rights %lu(%lxh)\n",
+               __func__, __LINE__, dev->lpm.pu_id, dev->lpm.rights,
+               dev->lpm.rights);
+
+       result = ps3_repository_read_pu_id(0, &dev->lpm.pu_id);
+
+       if (result) {
+               pr_debug("%s:%d: ps3_repository_read_pu_id failed \n",
+                       __func__, __LINE__);
+               goto fail_read_repo;
+       }
+
+       result = ps3_system_bus_device_register(dev);
+
+       if (result) {
+               pr_debug("%s:%d ps3_system_bus_device_register failed\n",
+                       __func__, __LINE__);
+               goto fail_register;
+       }
+
+       pr_debug(" <- %s:%d\n", __func__, __LINE__);
+       return 0;
+
+
+fail_register:
+fail_rights:
+fail_read_repo:
+       kfree(dev);
+       pr_debug(" <- %s:%d: failed\n", __func__, __LINE__);
+       return result;
+}
+
 /**
  * ps3_setup_gelic_device - Setup and register a gelic device instance.
  *
@@ -238,166 +322,6 @@
        return result;
 }
 
-static int ps3stor_wait_for_completion(u64 dev_id, u64 tag,
-                                      unsigned int timeout)
-{
-       int result = -1;
-       unsigned int retries = 0;
-       u64 status;
-
-       for (retries = 0; retries < timeout; retries++) {
-               result = lv1_storage_check_async_status(dev_id, tag, &status);
-               if (!result)
-                       break;
-
-               msleep(1);
-       }
-
-       if (result)
-               pr_debug("%s:%u: check_async_status: %s, status %lx\n",
-                        __func__, __LINE__, ps3_result(result), status);
-
-       return result;
-}
-
-/**
- * ps3_storage_wait_for_device - Wait for a storage device to become ready.
- * @repo: The repository device to wait for.
- *
- * Uses the hypervisor's storage device notification mechanism to wait until
- * a storage device is ready.  The device notification mechanism uses a
- * psuedo device (id = -1) to asynchronously notify the guest when storage
- * devices become ready.  The notification device has a block size of 512
- * bytes.
- */
-
-static int ps3_storage_wait_for_device(const struct ps3_repository_device *repo)
-{
-       int error = -ENODEV;
-       int result;
-       const u64 notification_dev_id = (u64)-1LL;
-       const unsigned int timeout = HZ;
-       u64 lpar;
-       u64 tag;
-       void *buf;
-       enum ps3_notify_type {
-               notify_device_ready = 0,
-               notify_region_probe = 1,
-               notify_region_update = 2,
-       };
-       struct {
-               u64 operation_code;     /* must be zero */
-               u64 event_mask;         /* OR of 1UL << enum ps3_notify_type */
-       } *notify_cmd;
-       struct {
-               u64 event_type;         /* enum ps3_notify_type */
-               u64 bus_id;
-               u64 dev_id;
-               u64 dev_type;
-               u64 dev_port;
-       } *notify_event;
-
-       pr_debug(" -> %s:%u: (%u:%u:%u)\n", __func__, __LINE__, repo->bus_id,
-                repo->dev_id, repo->dev_type);
-
-       buf = kzalloc(512, GFP_KERNEL);
-       if (!buf)
-               return -ENOMEM;
-
-       lpar = ps3_mm_phys_to_lpar(__pa(buf));
-       notify_cmd = buf;
-       notify_event = buf;
-
-       result = lv1_open_device(repo->bus_id, notification_dev_id, 0);
-       if (result) {
-               printk(KERN_ERR "%s:%u: lv1_open_device %s\n", __func__,
-                      __LINE__, ps3_result(result));
-               goto fail_free;
-       }
-
-       /* Setup and write the request for device notification. */
-
-       notify_cmd->operation_code = 0; /* must be zero */
-       notify_cmd->event_mask = 1UL << notify_region_probe;
-
-       result = lv1_storage_write(notification_dev_id, 0, 0, 1, 0, lpar,
-                                  &tag);
-       if (result) {
-               printk(KERN_ERR "%s:%u: write failed %s\n", __func__, __LINE__,
-                      ps3_result(result));
-               goto fail_close;
-       }
-
-       /* Wait for the write completion */
-
-       result = ps3stor_wait_for_completion(notification_dev_id, tag,
-                                            timeout);
-       if (result) {
-               printk(KERN_ERR "%s:%u: write not completed %s\n", __func__,
-                      __LINE__, ps3_result(result));
-               goto fail_close;
-       }
-
-       /* Loop here processing the requested notification events. */
-
-       while (1) {
-               memset(notify_event, 0, sizeof(*notify_event));
-
-               result = lv1_storage_read(notification_dev_id, 0, 0, 1, 0,
-                                         lpar, &tag);
-               if (result) {
-                       printk(KERN_ERR "%s:%u: write failed %s\n", __func__,
-                              __LINE__, ps3_result(result));
-                       break;
-               }
-
-               result = ps3stor_wait_for_completion(notification_dev_id, tag,
-                                                    timeout);
-               if (result) {
-                       printk(KERN_ERR "%s:%u: read not completed %s\n",
-                              __func__, __LINE__, ps3_result(result));
-                       break;
-               }
-
-               pr_debug("%s:%d: notify event (%u:%u:%u): event_type 0x%lx, "
-                        "port %lu\n", __func__, __LINE__, repo->bus_index,
-                        repo->dev_index, repo->dev_type,
-                        notify_event->event_type, notify_event->dev_port);
-
-               if (notify_event->event_type != notify_region_probe ||
-                   notify_event->bus_id != repo->bus_id) {
-                       pr_debug("%s:%u: bad notify_event: event %lu, "
-                                "dev_id %lu, dev_type %lu\n",
-                                __func__, __LINE__, notify_event->event_type,
-                                notify_event->dev_id, notify_event->dev_type);
-                       break;
-               }
-
-               if (notify_event->dev_id == repo->dev_id &&
-                   notify_event->dev_type == repo->dev_type) {
-                       pr_debug("%s:%u: device ready (%u:%u:%u)\n", __func__,
-                                __LINE__, repo->bus_index, repo->dev_index,
-                                repo->dev_type);
-                       error = 0;
-                       break;
-               }
-
-               if (notify_event->dev_id == repo->dev_id &&
-                   notify_event->dev_type == PS3_DEV_TYPE_NOACCESS) {
-                       pr_debug("%s:%u: no access: dev_id %u\n", __func__,
-                                __LINE__, repo->dev_id);
-                       break;
-               }
-       }
-
-fail_close:
-       lv1_close_device(repo->bus_id, notification_dev_id);
-fail_free:
-       kfree(buf);
-       pr_debug(" <- %s:%u\n", __func__, __LINE__);
-       return error;
-}
-
 static int ps3_setup_storage_dev(const struct ps3_repository_device *repo,
                                 enum ps3_match_id match_id)
 {
@@ -449,16 +373,6 @@
                goto fail_find_interrupt;
        }
 
-       /* FIXME: Arrange to only do this on a 'cold' boot */
-
-       result = ps3_storage_wait_for_device(repo);
-       if (result) {
-               printk(KERN_ERR "%s:%u: storage_notification failed %d\n",
-                      __func__, __LINE__, result);
-               result = -ENODEV;
-               goto fail_probe_notification;
-       }
-
        for (i = 0; i < num_regions; i++) {
                unsigned int id;
                u64 start, size;
@@ -494,7 +408,6 @@
 
 fail_device_register:
 fail_read_region:
-fail_probe_notification:
 fail_find_interrupt:
        kfree(p);
 fail_malloc:
@@ -659,62 +572,268 @@
        return result;
 }
 
+static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
+{
+       struct ps3_repository_device repo;
+       int res;
+       unsigned int retries;
+       unsigned long rem;
+
+       /*
+        * On some firmware versions (e.g. 1.90), the device may not show up
+        * in the repository immediately
+        */
+       for (retries = 0; retries < 10; retries++) {
+               res = ps3_repository_find_device_by_id(&repo, bus_id, dev_id);
+               if (!res)
+                       goto found;
+
+               rem = msleep_interruptible(100);
+               if (rem)
+                       break;
+       }
+       pr_warning("%s:%u: device %lu:%lu not found\n", __func__, __LINE__,
+                  bus_id, dev_id);
+       return;
+
+found:
+       if (retries)
+               pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
+                        __func__, __LINE__, bus_id, dev_id, retries);
+
+       ps3_register_repository_device(&repo);
+       return;
+}
+
+#define PS3_NOTIFICATION_DEV_ID                ULONG_MAX
+#define PS3_NOTIFICATION_INTERRUPT_ID  0
+
+struct ps3_notification_device {
+       struct ps3_system_bus_device sbd;
+       spinlock_t lock;
+       u64 tag;
+       u64 lv1_status;
+       struct completion done;
+};
+
+enum ps3_notify_type {
+       notify_device_ready = 0,
+       notify_region_probe = 1,
+       notify_region_update = 2,
+};
+
+struct ps3_notify_cmd {
+       u64 operation_code;             /* must be zero */
+       u64 event_mask;                 /* OR of 1UL << enum ps3_notify_type */
+};
+
+struct ps3_notify_event {
+       u64 event_type;                 /* enum ps3_notify_type */
+       u64 bus_id;
+       u64 dev_id;
+       u64 dev_type;
+       u64 dev_port;
+};
+
+static irqreturn_t ps3_notification_interrupt(int irq, void *data)
+{
+       struct ps3_notification_device *dev = data;
+       int res;
+       u64 tag, status;
+
+       spin_lock(&dev->lock);
+       res = lv1_storage_get_async_status(PS3_NOTIFICATION_DEV_ID, &tag,
+                                          &status);
+       if (tag != dev->tag)
+               pr_err("%s:%u: tag mismatch, got %lx, expected %lx\n",
+                      __func__, __LINE__, tag, dev->tag);
+
+       if (res) {
+               pr_err("%s:%u: res %d status 0x%lx\n", __func__, __LINE__, res,
+                      status);
+       } else {
+               pr_debug("%s:%u: completed, status 0x%lx\n", __func__,
+                        __LINE__, status);
+               dev->lv1_status = status;
+               complete(&dev->done);
+       }
+       spin_unlock(&dev->lock);
+       return IRQ_HANDLED;
+}
+
+static int ps3_notification_read_write(struct ps3_notification_device *dev,
+                                      u64 lpar, int write)
+{
+       const char *op = write ? "write" : "read";
+       unsigned long flags;
+       int res;
+
+       init_completion(&dev->done);
+       spin_lock_irqsave(&dev->lock, flags);
+       res = write ? lv1_storage_write(dev->sbd.dev_id, 0, 0, 1, 0, lpar,
+                                       &dev->tag)
+                   : lv1_storage_read(dev->sbd.dev_id, 0, 0, 1, 0, lpar,
+                                      &dev->tag);
+       spin_unlock_irqrestore(&dev->lock, flags);
+       if (res) {
+               pr_err("%s:%u: %s failed %d\n", __func__, __LINE__, op, res);
+               return -EPERM;
+       }
+       pr_debug("%s:%u: notification %s issued\n", __func__, __LINE__, op);
+
+       res = wait_event_interruptible(dev->done.wait,
+                                      dev->done.done || kthread_should_stop());
+       if (kthread_should_stop())
+               res = -EINTR;
+       if (res) {
+               pr_debug("%s:%u: interrupted %s\n", __func__, __LINE__, op);
+               return res;
+       }
+
+       if (dev->lv1_status) {
+               pr_err("%s:%u: %s not completed, status 0x%lx\n", __func__,
+                      __LINE__, op, dev->lv1_status);
+               return -EIO;
+       }
+       pr_debug("%s:%u: notification %s completed\n", __func__, __LINE__, op);
+
+       return 0;
+}
+
+static struct task_struct *probe_task;
+
 /**
  * ps3_probe_thread - Background repository probing at system startup.
  *
  * This implementation only supports background probing on a single bus.
+ * It uses the hypervisor's storage device notification mechanism to wait until
+ * a storage device is ready.  The device notification mechanism uses a
+ * pseudo device to asynchronously notify the guest when storage devices become
+ * ready.  The notification device has a block size of 512 bytes.
  */
 
 static int ps3_probe_thread(void *data)
 {
-       struct ps3_repository_device *repo = data;
-       int result;
-       unsigned int ms = 250;
+       struct ps3_notification_device dev;
+       int res;
+       unsigned int irq;
+       u64 lpar;
+       void *buf;
+       struct ps3_notify_cmd *notify_cmd;
+       struct ps3_notify_event *notify_event;
 
        pr_debug(" -> %s:%u: kthread started\n", __func__, __LINE__);
 
-       do {
-               try_to_freeze();
+       buf = kzalloc(512, GFP_KERNEL);
+       if (!buf)
+               return -ENOMEM;
 
-               pr_debug("%s:%u: probing...\n", __func__, __LINE__);
+       lpar = ps3_mm_phys_to_lpar(__pa(buf));
+       notify_cmd = buf;
+       notify_event = buf;
+
+       /* dummy system bus device */
+       dev.sbd.bus_id = (u64)data;
+       dev.sbd.dev_id = PS3_NOTIFICATION_DEV_ID;
+       dev.sbd.interrupt_id = PS3_NOTIFICATION_INTERRUPT_ID;
+
+       res = lv1_open_device(dev.sbd.bus_id, dev.sbd.dev_id, 0);
+       if (res) {
+               pr_err("%s:%u: lv1_open_device failed %s\n", __func__,
+                      __LINE__, ps3_result(res));
+               goto fail_free;
+       }
+
+       res = ps3_sb_event_receive_port_setup(&dev.sbd, PS3_BINDING_CPU_ANY,
+                                             &irq);
+       if (res) {
+               pr_err("%s:%u: ps3_sb_event_receive_port_setup failed %d\n",
+                      __func__, __LINE__, res);
+              goto fail_close_device;
+       }
+
+       spin_lock_init(&dev.lock);
+
+       res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED,
+                         "ps3_notification", &dev);
+       if (res) {
+               pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__,
+                      res);
+               goto fail_sb_event_receive_port_destroy;
+       }
+
+       /* Setup and write the request for device notification. */
+       notify_cmd->operation_code = 0; /* must be zero */
+       notify_cmd->event_mask = 1UL << notify_region_probe;
 
-               do {
-                       result = ps3_repository_find_device(repo);
+       res = ps3_notification_read_write(&dev, lpar, 1);
+       if (res)
+               goto fail_free_irq;
 
-                       if (result == -ENODEV)
-                               pr_debug("%s:%u: nothing new\n", __func__,
-                                       __LINE__);
-                       else if (result)
-                               pr_debug("%s:%u: find device error.\n",
-                                       __func__, __LINE__);
-                       else {
-                               pr_debug("%s:%u: found device (%u:%u:%u)\n",
-                                        __func__, __LINE__, repo->bus_index,
-                                        repo->dev_index, repo->dev_type);
-                               ps3_register_repository_device(repo);
-                               ps3_repository_bump_device(repo);
-                               ms = 250;
-                       }
-               } while (!result);
+       /* Loop here processing the requested notification events. */
+       do {
+               try_to_freeze();
 
-               pr_debug("%s:%u: ms %u\n", __func__, __LINE__, ms);
+               memset(notify_event, 0, sizeof(*notify_event));
 
-               if ( ms > 60000)
+               res = ps3_notification_read_write(&dev, lpar, 0);
+               if (res)
                        break;
 
-               msleep_interruptible(ms);
+               pr_debug("%s:%u: notify event type 0x%lx bus id %lu dev id %lu"
+                        " type %lu port %lu\n", __func__, __LINE__,
+                        notify_event->event_type, notify_event->bus_id,
+                        notify_event->dev_id, notify_event->dev_type,
+                        notify_event->dev_port);
+
+               if (notify_event->event_type != notify_region_probe ||
+                   notify_event->bus_id != dev.sbd.bus_id) {
+                       pr_warning("%s:%u: bad notify_event: event %lu, "
+                                  "dev_id %lu, dev_type %lu\n",
+                                  __func__, __LINE__, notify_event->event_type,
+                                  notify_event->dev_id,
+                                  notify_event->dev_type);
+                       continue;
+               }
 
-               /* An exponential backoff. */
-               ms <<= 1;
+               ps3_find_and_add_device(dev.sbd.bus_id, notify_event->dev_id);
 
        } while (!kthread_should_stop());
 
+fail_free_irq:
+       free_irq(irq, &dev);
+fail_sb_event_receive_port_destroy:
+       ps3_sb_event_receive_port_destroy(&dev.sbd, irq);
+fail_close_device:
+       lv1_close_device(dev.sbd.bus_id, dev.sbd.dev_id);
+fail_free:
+       kfree(buf);
+
+       probe_task = NULL;
+
        pr_debug(" <- %s:%u: kthread finished\n", __func__, __LINE__);
 
        return 0;
 }
 
 /**
+ * ps3_stop_probe_thread - Stops the background probe thread.
+ *
+ */
+
+static int ps3_stop_probe_thread(struct notifier_block *nb, unsigned long code,
+                                void *data)
+{
+       if (probe_task)
+               kthread_stop(probe_task);
+       return 0;
+}
+
+static struct notifier_block nb = {
+       .notifier_call = ps3_stop_probe_thread
+};
+
+/**
  * ps3_start_probe_thread - Starts the background probe thread.
  *
  */
@@ -723,7 +842,7 @@
 {
        int result;
        struct task_struct *task;
-       static struct ps3_repository_device repo; /* must be static */
+       struct ps3_repository_device repo;
 
        pr_debug(" -> %s:%d\n", __func__, __LINE__);
 
@@ -746,7 +865,8 @@
                return -ENODEV;
        }
 
-       task = kthread_run(ps3_probe_thread, &repo, "ps3-probe-%u", bus_type);
+       task = kthread_run(ps3_probe_thread, (void *)repo.bus_id,
+                          "ps3-probe-%u", bus_type);
 
        if (IS_ERR(task)) {
                result = PTR_ERR(task);
@@ -755,6 +875,9 @@
                return result;
        }
 
+       probe_task = task;
+       register_reboot_notifier(&nb);
+
        pr_debug(" <- %s:%d\n", __func__, __LINE__);
        return 0;
 }
@@ -787,6 +910,8 @@
 
        ps3_register_sound_devices();
 
+       ps3_register_lpm_devices();
+
        pr_debug(" <- %s:%d\n", __func__, __LINE__);
        return 0;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/ps3/mm.c powerpc.git/arch/powerpc/platforms/ps3/mm.c
--- linux-2.6.24/arch/powerpc/platforms/ps3/mm.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/ps3/mm.c 2008-01-28 20:25:49.000000000 +0100
@@ -36,11 +36,6 @@
 #endif
 
 enum {
-#if defined(CONFIG_PS3_USE_LPAR_ADDR)
-       USE_LPAR_ADDR = 1,
-#else
-       USE_LPAR_ADDR = 0,
-#endif
 #if defined(CONFIG_PS3_DYNAMIC_DMA)
        USE_DYNAMIC_DMA = 1,
 #else
@@ -137,11 +132,8 @@
 unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr)
 {
        BUG_ON(is_kernel_addr(phys_addr));
-       if (USE_LPAR_ADDR)
-               return phys_addr;
-       else
-               return (phys_addr < map.rm.size || phys_addr >= map.total)
-                       ? phys_addr : phys_addr + map.r1.offset;
+       return (phys_addr < map.rm.size || phys_addr >= map.total)
+               ? phys_addr : phys_addr + map.r1.offset;
 }
 
 EXPORT_SYMBOL(ps3_mm_phys_to_lpar);
@@ -309,7 +301,7 @@
 
        BUG_ON(!mem_init_done);
 
-       start_addr = USE_LPAR_ADDR ? map.r1.base : map.rm.size;
+       start_addr = map.rm.size;
        start_pfn = start_addr >> PAGE_SHIFT;
        nr_pages = (map.r1.size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
@@ -359,7 +351,7 @@
 static void  __maybe_unused _dma_dump_region(const struct ps3_dma_region *r,
        const char *func, int line)
 {
-       DBG("%s:%d: dev        %u:%u\n", func, line, r->dev->bus_id,
+       DBG("%s:%d: dev        %lu:%lu\n", func, line, r->dev->bus_id,
                r->dev->dev_id);
        DBG("%s:%d: page_size  %u\n", func, line, r->page_size);
        DBG("%s:%d: bus_addr   %lxh\n", func, line, r->bus_addr);
@@ -394,7 +386,7 @@
 static void _dma_dump_chunk (const struct dma_chunk* c, const char* func,
        int line)
 {
-       DBG("%s:%d: r.dev        %u:%u\n", func, line,
+       DBG("%s:%d: r.dev        %lu:%lu\n", func, line,
                c->region->dev->bus_id, c->region->dev->dev_id);
        DBG("%s:%d: r.bus_addr   %lxh\n", func, line, c->region->bus_addr);
        DBG("%s:%d: r.page_size  %u\n", func, line, c->region->page_size);
@@ -658,7 +650,7 @@
        BUG_ON(!r);
 
        if (!r->dev->bus_id) {
-               pr_info("%s:%d: %u:%u no dma\n", __func__, __LINE__,
+               pr_info("%s:%d: %lu:%lu no dma\n", __func__, __LINE__,
                        r->dev->bus_id, r->dev->dev_id);
                return 0;
        }
@@ -724,7 +716,7 @@
        BUG_ON(!r);
 
        if (!r->dev->bus_id) {
-               pr_info("%s:%d: %u:%u no dma\n", __func__, __LINE__,
+               pr_info("%s:%d: %lu:%lu no dma\n", __func__, __LINE__,
                        r->dev->bus_id, r->dev->dev_id);
                return 0;
        }
@@ -1007,7 +999,7 @@
 
        if (r->offset + r->len > map.rm.size) {
                /* Map (part of) 2nd RAM chunk */
-               virt_addr = USE_LPAR_ADDR ? map.r1.base : map.rm.size;
+               virt_addr = map.rm.size;
                len = r->len;
                if (r->offset >= map.rm.size)
                        virt_addr += r->offset - map.rm.size;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/ps3/platform.h powerpc.git/arch/powerpc/platforms/ps3/platform.h
--- linux-2.6.24/arch/powerpc/platforms/ps3/platform.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/ps3/platform.h   2008-01-28 20:25:49.000000000 +0100
@@ -89,13 +89,11 @@
        PS3_DEV_TYPE_STOR_ROM = TYPE_ROM,       /* 5 */
        PS3_DEV_TYPE_SB_GPIO = 6,
        PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC,     /* 14 */
-       PS3_DEV_TYPE_STOR_DUMMY = 32,
-       PS3_DEV_TYPE_NOACCESS = 255,
 };
 
 int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str,
        u64 *value);
-int ps3_repository_read_bus_id(unsigned int bus_index, unsigned int *bus_id);
+int ps3_repository_read_bus_id(unsigned int bus_index, u64 *bus_id);
 int ps3_repository_read_bus_type(unsigned int bus_index,
        enum ps3_bus_type *bus_type);
 int ps3_repository_read_bus_num_dev(unsigned int bus_index,
@@ -119,7 +117,7 @@
 int ps3_repository_read_dev_str(unsigned int bus_index,
        unsigned int dev_index, const char *dev_str, u64 *value);
 int ps3_repository_read_dev_id(unsigned int bus_index, unsigned int dev_index,
-       unsigned int *dev_id);
+       u64 *dev_id);
 int ps3_repository_read_dev_type(unsigned int bus_index,
        unsigned int dev_index, enum ps3_dev_type *dev_type);
 int ps3_repository_read_dev_intr(unsigned int bus_index,
@@ -138,21 +136,17 @@
 /* repository bus enumerators */
 
 struct ps3_repository_device {
-       enum ps3_bus_type bus_type;
        unsigned int bus_index;
-       unsigned int bus_id;
-       enum ps3_dev_type dev_type;
        unsigned int dev_index;
-       unsigned int dev_id;
+       enum ps3_bus_type bus_type;
+       enum ps3_dev_type dev_type;
+       u64 bus_id;
+       u64 dev_id;
 };
 
-static inline struct ps3_repository_device *ps3_repository_bump_device(
-       struct ps3_repository_device *repo)
-{
-       repo->dev_index++;
-       return repo;
-}
 int ps3_repository_find_device(struct ps3_repository_device *repo);
+int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
+                                    u64 bus_id, u64 dev_id);
 int ps3_repository_find_devices(enum ps3_bus_type bus_type,
        int (*callback)(const struct ps3_repository_device *repo));
 int ps3_repository_find_bus(enum ps3_bus_type bus_type, unsigned int from,
@@ -186,10 +180,10 @@
        unsigned int dev_index, unsigned int region_index,
        unsigned int *region_id, u64 *region_start, u64 *region_size);
 
-/* repository pu and memory info */
+/* repository logical pu and memory info */
 
-int ps3_repository_read_num_pu(unsigned int *num_pu);
-int ps3_repository_read_ppe_id(unsigned int *pu_index, unsigned int *ppe_id);
+int ps3_repository_read_num_pu(u64 *num_pu);
+int ps3_repository_read_pu_id(unsigned int pu_index, u64 *pu_id);
 int ps3_repository_read_rm_base(unsigned int ppe_id, u64 *rm_base);
 int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size);
 int ps3_repository_read_region_total(u64 *region_total);
@@ -200,9 +194,15 @@
 
 int ps3_repository_read_num_be(unsigned int *num_be);
 int ps3_repository_read_be_node_id(unsigned int be_index, u64 *node_id);
+int ps3_repository_read_be_id(u64 node_id, u64 *be_id);
 int ps3_repository_read_tb_freq(u64 node_id, u64 *tb_freq);
 int ps3_repository_read_be_tb_freq(unsigned int be_index, u64 *tb_freq);
 
+/* repository performance monitor info */
+
+int ps3_repository_read_lpm_privileges(unsigned int be_index, u64 *lpar,
+       u64 *rights);
+
 /* repository 'Other OS' area */
 
 int ps3_repository_read_boot_dat_addr(u64 *lpar_addr);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/ps3/repository.c powerpc.git/arch/powerpc/platforms/ps3/repository.c
--- linux-2.6.24/arch/powerpc/platforms/ps3/repository.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/ps3/repository.c 2008-01-28 20:25:49.000000000 +0100
@@ -33,7 +33,7 @@
 };
 
 #define dump_field(_a, _b) _dump_field(_a, _b, __func__, __LINE__)
-static void _dump_field(const char *hdr, u64 n, const char* func, int line)
+static void _dump_field(const char *hdr, u64 n, const char *func, int line)
 {
 #if defined(DEBUG)
        char s[16];
@@ -50,8 +50,8 @@
 
 #define dump_node_name(_a, _b, _c, _d, _e) \
        _dump_node_name(_a, _b, _c, _d, _e, __func__, __LINE__)
-static void _dump_node_name (unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
-       u64 n4, const char* func, int line)
+static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
+       u64 n4, const char *func, int line)
 {
        pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
        _dump_field("n1: ", n1, func, line);
@@ -63,7 +63,7 @@
 #define dump_node(_a, _b, _c, _d, _e, _f, _g) \
        _dump_node(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__)
 static void _dump_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
-       u64 v1, u64 v2, const char* func, int line)
+       u64 v1, u64 v2, const char *func, int line)
 {
        pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
        _dump_field("n1: ", n1, func, line);
@@ -165,21 +165,18 @@
                make_first_field("bus", bus_index),
                make_field(bus_str, 0),
                0, 0,
-               value, 0);
+               value, NULL);
 }
 
-int ps3_repository_read_bus_id(unsigned int bus_index, unsigned int *bus_id)
+int ps3_repository_read_bus_id(unsigned int bus_index, u64 *bus_id)
 {
        int result;
-       u64 v1;
-       u64 v2; /* unused */
 
        result = read_node(PS3_LPAR_ID_PME,
                make_first_field("bus", bus_index),
                make_field("id", 0),
                0, 0,
-               &v1, &v2);
-       *bus_id = v1;
+               bus_id, NULL);
        return result;
 }
 
@@ -193,7 +190,7 @@
                make_first_field("bus", bus_index),
                make_field("type", 0),
                0, 0,
-               &v1, 0);
+               &v1, NULL);
        *bus_type = v1;
        return result;
 }
@@ -208,7 +205,7 @@
                make_first_field("bus", bus_index),
                make_field("num_dev", 0),
                0, 0,
-               &v1, 0);
+               &v1, NULL);
        *num_dev = v1;
        return result;
 }
@@ -221,22 +218,20 @@
                make_field("dev", dev_index),
                make_field(dev_str, 0),
                0,
-               value, 0);
+               value, NULL);
 }
 
 int ps3_repository_read_dev_id(unsigned int bus_index, unsigned int dev_index,
-       unsigned int *dev_id)
+       u64 *dev_id)
 {
        int result;
-       u64 v1;
 
        result = read_node(PS3_LPAR_ID_PME,
                make_first_field("bus", bus_index),
                make_field("dev", dev_index),
                make_field("id", 0),
                0,
-               &v1, 0);
-       *dev_id = v1;
+               dev_id, NULL);
        return result;
 }
 
@@ -251,14 +246,14 @@
                make_field("dev", dev_index),
                make_field("type", 0),
                0,
-               &v1, 0);
+               &v1, NULL);
        *dev_type = v1;
        return result;
 }
 
 int ps3_repository_read_dev_intr(unsigned int bus_index,
        unsigned int dev_index, unsigned int intr_index,
-       enum ps3_interrupt_type *intr_type, unsigned int* interrupt_id)
+       enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id)
 {
        int result;
        u64 v1;
@@ -287,7 +282,7 @@
                make_field("dev", dev_index),
                make_field("reg", reg_index),
                make_field("type", 0),
-               &v1, 0);
+               &v1, NULL);
        *reg_type = v1;
        return result;
 }
@@ -332,7 +327,7 @@
                return result;
        }
 
-       pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %u, num_dev %u\n",
+       pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %lu, num_dev %u\n",
                __func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id,
                num_dev);
 
@@ -349,47 +344,95 @@
                return result;
        }
 
-       if (tmp.bus_type == PS3_BUS_TYPE_STORAGE) {
-               /*
-                * A storage device may show up in the repository before the
-                * hypervisor has finished probing its type and regions
-                */
-               unsigned int num_regions;
-
-               if (tmp.dev_type == PS3_DEV_TYPE_STOR_DUMMY) {
-                       pr_debug("%s:%u storage device not ready\n", __func__,
-                                __LINE__);
-                       return -ENODEV;
-               }
+       result = ps3_repository_read_dev_id(tmp.bus_index, tmp.dev_index,
+               &tmp.dev_id);
 
-               result = ps3_repository_read_stor_dev_num_regions(tmp.bus_index,
-                                                                 tmp.dev_index,
-                                                                 &num_regions);
+       if (result) {
+               pr_debug("%s:%d ps3_repository_read_dev_id failed\n", __func__,
+               __LINE__);
+               return result;
+       }
+
+       pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %lu\n",
+               __func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
+
+       *repo = tmp;
+       return 0;
+}
+
+int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
+                                    u64 bus_id, u64 dev_id)
+{
+       int result = -ENODEV;
+       struct ps3_repository_device tmp;
+       unsigned int num_dev;
+
+       pr_debug(" -> %s:%u: find device by id %lu:%lu\n", __func__, __LINE__,
+                bus_id, dev_id);
+
+       for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) {
+               result = ps3_repository_read_bus_id(tmp.bus_index,
+                                                   &tmp.bus_id);
                if (result) {
-                       pr_debug("%s:%d read_stor_dev_num_regions failed\n",
-                                __func__, __LINE__);
+                       pr_debug("%s:%u read_bus_id(%u) failed\n", __func__,
+                                __LINE__, tmp.bus_index);
                        return result;
                }
 
-               if (!num_regions) {
-                       pr_debug("%s:%u storage device has no regions yet\n",
-                                __func__, __LINE__);
-                       return -ENODEV;
-               }
+               if (tmp.bus_id == bus_id)
+                       goto found_bus;
+
+               pr_debug("%s:%u: skip, bus_id %lu\n", __func__, __LINE__,
+                        tmp.bus_id);
        }
+       pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+       return result;
 
-       result = ps3_repository_read_dev_id(tmp.bus_index, tmp.dev_index,
-               &tmp.dev_id);
+found_bus:
+       result = ps3_repository_read_bus_type(tmp.bus_index, &tmp.bus_type);
+       if (result) {
+               pr_debug("%s:%u read_bus_type(%u) failed\n", __func__,
+                        __LINE__, tmp.bus_index);
+               return result;
+       }
 
+       result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
        if (result) {
-               pr_debug("%s:%d ps3_repository_read_dev_id failed\n", __func__,
-               __LINE__);
+               pr_debug("%s:%u read_bus_num_dev failed\n", __func__,
+                        __LINE__);
                return result;
        }
 
-       pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %u\n",
-               __func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
+       for (tmp.dev_index = 0; tmp.dev_index < num_dev; tmp.dev_index++) {
+               result = ps3_repository_read_dev_id(tmp.bus_index,
+                                                   tmp.dev_index,
+                                                   &tmp.dev_id);
+               if (result) {
+                       pr_debug("%s:%u read_dev_id(%u:%u) failed\n", __func__,
+                                __LINE__, tmp.bus_index, tmp.dev_index);
+                       return result;
+               }
+
+               if (tmp.dev_id == dev_id)
+                       goto found_dev;
+
+               pr_debug("%s:%u: skip, dev_id %lu\n", __func__, __LINE__,
+                        tmp.dev_id);
+       }
+       pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__);
+       return result;
+
+found_dev:
+       result = ps3_repository_read_dev_type(tmp.bus_index, tmp.dev_index,
+                                             &tmp.dev_type);
+       if (result) {
+               pr_debug("%s:%u read_dev_type failed\n", __func__, __LINE__);
+               return result;
+       }
 
+       pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%lu:%lu)\n",
+                __func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index,
+                tmp.dev_index, tmp.bus_id, tmp.dev_id);
        *repo = tmp;
        return 0;
 }
@@ -402,50 +445,34 @@
 
        pr_debug(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
 
-       for (repo.bus_index = 0; repo.bus_index < 10; repo.bus_index++) {
+       repo.bus_type = bus_type;
+       result = ps3_repository_find_bus(repo.bus_type, 0, &repo.bus_index);
+       if (result) {
+               pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+               return result;
+       }
 
-               result = ps3_repository_read_bus_type(repo.bus_index,
-                       &repo.bus_type);
+       result = ps3_repository_read_bus_id(repo.bus_index, &repo.bus_id);
+       if (result) {
+               pr_debug("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
+                        repo.bus_index);
+               return result;
+       }
 
-               if (result) {
-                       pr_debug("%s:%d read_bus_type(%u) failed\n",
-                               __func__, __LINE__, repo.bus_index);
+       for (repo.dev_index = 0; ; repo.dev_index++) {
+               result = ps3_repository_find_device(&repo);
+               if (result == -ENODEV) {
+                       result = 0;
+                       break;
+               } else if (result)
                        break;
-               }
-
-               if (repo.bus_type != bus_type) {
-                       pr_debug("%s:%d: skip, bus_type %u\n", __func__,
-                               __LINE__, repo.bus_type);
-                       continue;
-               }
-
-               result = ps3_repository_read_bus_id(repo.bus_index,
-                       &repo.bus_id);
 
+               result = callback(&repo);
                if (result) {
-                       pr_debug("%s:%d read_bus_id(%u) failed\n",
-                               __func__, __LINE__, repo.bus_index);
-                       continue;
-               }
-
-               for (repo.dev_index = 0; ; repo.dev_index++) {
-                       result = ps3_repository_find_device(&repo);
-
-                       if (result == -ENODEV) {
-                               result = 0;
-                               break;
-                       } else if (result)
-                               break;
-
-                       result = callback(&repo);
-
-                       if (result) {
-                               pr_debug("%s:%d: abort at callback\n", __func__,
-                                       __LINE__);
-                               break;
-                       }
+                       pr_debug("%s:%d: abort at callback\n", __func__,
+                               __LINE__);
+                       break;
                }
-               break;
        }
 
        pr_debug(" <- %s:%d\n", __func__, __LINE__);
@@ -561,7 +588,7 @@
                make_first_field("bus", bus_index),
                make_field("dev", dev_index),
                make_field("port", 0),
-               0, port, 0);
+               0, port, NULL);
 }
 
 int ps3_repository_read_stor_dev_blk_size(unsigned int bus_index,
@@ -571,7 +598,7 @@
                make_first_field("bus", bus_index),
                make_field("dev", dev_index),
                make_field("blk_size", 0),
-               0, blk_size, 0);
+               0, blk_size, NULL);
 }
 
 int ps3_repository_read_stor_dev_num_blocks(unsigned int bus_index,
@@ -581,7 +608,7 @@
                make_first_field("bus", bus_index),
                make_field("dev", dev_index),
                make_field("n_blocks", 0),
-               0, num_blocks, 0);
+               0, num_blocks, NULL);
 }
 
 int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index,
@@ -594,7 +621,7 @@
                make_first_field("bus", bus_index),
                make_field("dev", dev_index),
                make_field("n_regs", 0),
-               0, &v1, 0);
+               0, &v1, NULL);
        *num_regions = v1;
        return result;
 }
@@ -611,7 +638,7 @@
            make_field("dev", dev_index),
            make_field("region", region_index),
            make_field("id", 0),
-           &v1, 0);
+           &v1, NULL);
        *region_id = v1;
        return result;
 }
@@ -624,7 +651,7 @@
            make_field("dev", dev_index),
            make_field("region", region_index),
            make_field("size", 0),
-           region_size, 0);
+           region_size, NULL);
 }
 
 int ps3_repository_read_stor_dev_region_start(unsigned int bus_index,
@@ -635,7 +662,7 @@
            make_field("dev", dev_index),
            make_field("region", region_index),
            make_field("start", 0),
-           region_start, 0);
+           region_start, NULL);
 }
 
 int ps3_repository_read_stor_dev_info(unsigned int bus_index,
@@ -684,6 +711,35 @@
        return result;
 }
 
+/**
+ * ps3_repository_read_num_pu - Number of logical PU processors for this lpar.
+ */
+
+int ps3_repository_read_num_pu(u64 *num_pu)
+{
+       *num_pu = 0;
+       return read_node(PS3_LPAR_ID_CURRENT,
+                          make_first_field("bi", 0),
+                          make_field("pun", 0),
+                          0, 0,
+                          num_pu, NULL);
+}
+
+/**
+ * ps3_repository_read_pu_id - Read the logical PU id.
+ * @pu_index: Zero based index.
+ * @pu_id: The logical PU id.
+ */
+
+int ps3_repository_read_pu_id(unsigned int pu_index, u64 *pu_id)
+{
+       return read_node(PS3_LPAR_ID_CURRENT,
+               make_first_field("bi", 0),
+               make_field("pu", pu_index),
+               0, 0,
+               pu_id, NULL);
+}
+
 int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size)
 {
        return read_node(PS3_LPAR_ID_CURRENT,
@@ -691,7 +747,7 @@
                make_field("pu", 0),
                ppe_id,
                make_field("rm_size", 0),
-               rm_size, 0);
+               rm_size, NULL);
 }
 
 int ps3_repository_read_region_total(u64 *region_total)
@@ -700,7 +756,7 @@
                make_first_field("bi", 0),
                make_field("rgntotal", 0),
                0, 0,
-               region_total, 0);
+               region_total, NULL);
 }
 
 /**
@@ -736,7 +792,7 @@
                make_first_field("bi", 0),
                make_field("spun", 0),
                0, 0,
-               &v1, 0);
+               &v1, NULL);
        *num_spu_reserved = v1;
        return result;
 }
@@ -755,7 +811,7 @@
                make_first_field("bi", 0),
                make_field("spursvn", 0),
                0, 0,
-               &v1, 0);
+               &v1, NULL);
        *num_resource_id = v1;
        return result;
 }
@@ -768,7 +824,7 @@
  */
 
 int ps3_repository_read_spu_resource_id(unsigned int res_index,
-       enum ps3_spu_resource_type* resource_type, unsigned int *resource_id)
+       enum ps3_spu_resource_type *resource_type, unsigned int *resource_id)
 {
        int result;
        u64 v1;
@@ -785,14 +841,14 @@
        return result;
 }
 
-int ps3_repository_read_boot_dat_address(u64 *address)
+static int ps3_repository_read_boot_dat_address(u64 *address)
 {
        return read_node(PS3_LPAR_ID_CURRENT,
                make_first_field("bi", 0),
                make_field("boot_dat", 0),
                make_field("address", 0),
                0,
-               address, 0);
+               address, NULL);
 }
 
 int ps3_repository_read_boot_dat_size(unsigned int *size)
@@ -805,7 +861,7 @@
                make_field("boot_dat", 0),
                make_field("size", 0),
                0,
-               &v1, 0);
+               &v1, NULL);
        *size = v1;
        return result;
 }
@@ -820,7 +876,7 @@
                make_field("vir_uart", 0),
                make_field("port", 0),
                make_field("avset", 0),
-               &v1, 0);
+               &v1, NULL);
        *port = v1;
        return result;
 }
@@ -835,7 +891,7 @@
                make_field("vir_uart", 0),
                make_field("port", 0),
                make_field("sysmgr", 0),
-               &v1, 0);
+               &v1, NULL);
        *port = v1;
        return result;
 }
@@ -856,6 +912,10 @@
                : ps3_repository_read_boot_dat_size(size);
 }
 
+/**
+ * ps3_repository_read_num_be - Number of physical BE processors in the system.
+ */
+
 int ps3_repository_read_num_be(unsigned int *num_be)
 {
        int result;
@@ -866,11 +926,17 @@
                0,
                0,
                0,
-               &v1, 0);
+               &v1, NULL);
        *num_be = v1;
        return result;
 }
 
+/**
+ * ps3_repository_read_be_node_id - Read the physical BE processor node id.
+ * @be_index: Zero based index.
+ * @node_id: The BE processor node id.
+ */
+
 int ps3_repository_read_be_node_id(unsigned int be_index, u64 *node_id)
 {
        return read_node(PS3_LPAR_ID_PME,
@@ -878,7 +944,23 @@
                0,
                0,
                0,
-               node_id, 0);
+               node_id, NULL);
+}
+
+/**
+ * ps3_repository_read_be_id - Read the physical BE processor id.
+ * @node_id: The BE processor node id.
+ * @be_id: The BE processor id.
+ */
+
+int ps3_repository_read_be_id(u64 node_id, u64 *be_id)
+{
+       return read_node(PS3_LPAR_ID_PME,
+               make_first_field("be", 0),
+               node_id,
+               0,
+               0,
+               be_id, NULL);
 }
 
 int ps3_repository_read_tb_freq(u64 node_id, u64 *tb_freq)
@@ -888,7 +970,7 @@
                node_id,
                make_field("clock", 0),
                0,
-               tb_freq, 0);
+               tb_freq, NULL);
 }
 
 int ps3_repository_read_be_tb_freq(unsigned int be_index, u64 *tb_freq)
@@ -897,11 +979,29 @@
        u64 node_id;
 
        *tb_freq = 0;
-       result = ps3_repository_read_be_node_id(0, &node_id);
+       result = ps3_repository_read_be_node_id(be_index, &node_id);
        return result ? result
                : ps3_repository_read_tb_freq(node_id, tb_freq);
 }
 
+int ps3_repository_read_lpm_privileges(unsigned int be_index, u64 *lpar,
+       u64 *rights)
+{
+       int result;
+       u64 node_id;
+
+       *lpar = 0;
+       *rights = 0;
+       result = ps3_repository_read_be_node_id(be_index, &node_id);
+       return result ? result
+               : read_node(PS3_LPAR_ID_PME,
+                           make_first_field("be", 0),
+                           node_id,
+                           make_field("lpm", 0),
+                           make_field("priv", 0),
+                           lpar, rights);
+}
+
 #if defined(DEBUG)
 
 int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
@@ -1034,7 +1134,7 @@
                        continue;
                }
 
-               pr_debug("%s:%d  (%u:%u): dev_type %u, dev_id %u\n", __func__,
+               pr_debug("%s:%d  (%u:%u): dev_type %u, dev_id %lu\n", __func__,
                        __LINE__, repo->bus_index, repo->dev_index,
                        repo->dev_type, repo->dev_id);
 
@@ -1091,7 +1191,7 @@
                        continue;
                }
 
-               pr_debug("%s:%d bus_%u: bus_type %u, bus_id %u, num_dev %u\n",
+               pr_debug("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
                        __func__, __LINE__, repo.bus_index, repo.bus_type,
                        repo.bus_id, num_dev);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/ps3/spu.c powerpc.git/arch/powerpc/platforms/ps3/spu.c
--- linux-2.6.24/arch/powerpc/platforms/ps3/spu.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/ps3/spu.c        2008-01-28 20:25:49.000000000 +0100
@@ -28,6 +28,7 @@
 #include <asm/spu_priv1.h>
 #include <asm/lv1call.h>
 
+#include "../cell/spufs/spufs.h"
 #include "platform.h"
 
 /* spu_management_ops */
@@ -419,10 +420,34 @@
        return 0;
 }
 
+/**
+ * ps3_enable_spu - Enable SPU run control.
+ *
+ * An outstanding enhancement for the PS3 would be to add a guard to check
+ * for incorrect access to the spu problem state when the spu context is
+ * disabled.  This check could be implemented with a flag added to the spu
+ * context that would inhibit mapping problem state pages, and a routine
+ * to unmap spu problem state pages.  When the spu is enabled with
+ * ps3_enable_spu() the flag would be set allowing pages to be mapped,
+ * and when the spu is disabled with ps3_disable_spu() the flag would be
+ * cleared and the mapped problem state pages would be unmapped.
+ */
+
+static void ps3_enable_spu(struct spu_context *ctx)
+{
+}
+
+static void ps3_disable_spu(struct spu_context *ctx)
+{
+       ctx->ops->runcntl_stop(ctx);
+}
+
 const struct spu_management_ops spu_management_ps3_ops = {
        .enumerate_spus = ps3_enumerate_spus,
        .create_spu = ps3_create_spu,
        .destroy_spu = ps3_destroy_spu,
+       .enable_spu = ps3_enable_spu,
+       .disable_spu = ps3_disable_spu,
        .init_affinity = ps3_init_affinity,
 };
 
@@ -505,8 +530,6 @@
        static const u64 allowed = ~(MFC_STATE1_LOCAL_STORAGE_DECODE_MASK
                | MFC_STATE1_PROBLEM_STATE_MASK);
 
-       sr1 |= MFC_STATE1_MASTER_RUN_CONTROL_MASK;
-
        BUG_ON((sr1 & allowed) != (spu_pdata(spu)->cache.sr1 & allowed));
 
        spu_pdata(spu)->cache.sr1 = sr1;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/ps3/system-bus.c powerpc.git/arch/powerpc/platforms/ps3/system-bus.c
--- linux-2.6.24/arch/powerpc/platforms/ps3/system-bus.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/ps3/system-bus.c 2008-01-28 20:25:49.000000000 +0100
@@ -42,8 +42,8 @@
        int gpu;
 } static usage_hack;
 
-static int ps3_is_device(struct ps3_system_bus_device *dev,
-                        unsigned int bus_id, unsigned int dev_id)
+static int ps3_is_device(struct ps3_system_bus_device *dev, u64 bus_id,
+                        u64 dev_id)
 {
        return dev->bus_id == bus_id && dev->dev_id == dev_id;
 }
@@ -182,8 +182,8 @@
        case PS3_MATCH_ID_SYSTEM_MANAGER:
                pr_debug("%s:%d: unsupported match_id: %u\n", __func__,
                        __LINE__, dev->match_id);
-               pr_debug("%s:%d: bus_id: %u\n", __func__,
-                       __LINE__, dev->bus_id);
+               pr_debug("%s:%d: bus_id: %lu\n", __func__, __LINE__,
+                       dev->bus_id);
                BUG();
                return -EINVAL;
 
@@ -220,8 +220,8 @@
        case PS3_MATCH_ID_SYSTEM_MANAGER:
                pr_debug("%s:%d: unsupported match_id: %u\n", __func__,
                        __LINE__, dev->match_id);
-               pr_debug("%s:%d: bus_id: %u\n", __func__,
-                       __LINE__, dev->bus_id);
+               pr_debug("%s:%d: bus_id: %lu\n", __func__, __LINE__,
+                       dev->bus_id);
                BUG();
                return -EINVAL;
 
@@ -240,7 +240,7 @@
 static void _dump_mmio_region(const struct ps3_mmio_region* r,
        const char* func, int line)
 {
-       pr_debug("%s:%d: dev       %u:%u\n", func, line, r->dev->bus_id,
+       pr_debug("%s:%d: dev       %lu:%lu\n", func, line, r->dev->bus_id,
                r->dev->dev_id);
        pr_debug("%s:%d: bus_addr  %lxh\n", func, line, r->bus_addr);
        pr_debug("%s:%d: len       %lxh\n", func, line, r->len);
@@ -715,6 +715,7 @@
        static unsigned int dev_ioc0_count;
        static unsigned int dev_sb_count;
        static unsigned int dev_vuart_count;
+       static unsigned int dev_lpm_count;
 
        if (!dev->core.parent)
                dev->core.parent = &ps3_system_bus;
@@ -737,6 +738,10 @@
                snprintf(dev->core.bus_id, sizeof(dev->core.bus_id),
                        "vuart_%02x", ++dev_vuart_count);
                break;
+       case PS3_DEVICE_TYPE_LPM:
+               snprintf(dev->core.bus_id, sizeof(dev->core.bus_id),
+                       "lpm_%02x", ++dev_lpm_count);
+               break;
        default:
                BUG();
        };
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/eeh.c powerpc.git/arch/powerpc/platforms/pseries/eeh.c
--- linux-2.6.24/arch/powerpc/platforms/pseries/eeh.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/eeh.c    2008-01-28 20:25:49.000000000 +0100
@@ -29,6 +29,8 @@
 #include <linux/rbtree.h>
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
+#include <linux/of.h>
+
 #include <asm/atomic.h>
 #include <asm/eeh.h>
 #include <asm/eeh_event.h>
@@ -169,7 +171,6 @@
  */
 static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
 {
-       struct device_node *dn;
        struct pci_dev *dev = pdn->pcidev;
        u32 cfg;
        int cap, i;
@@ -243,12 +244,12 @@
 
        /* Gather status on devices under the bridge */
        if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
-               dn = pdn->node->child;
-               while (dn) {
+               struct device_node *dn;
+
+               for_each_child_of_node(pdn->node, dn) {
                        pdn = PCI_DN(dn);
                        if (pdn)
                                n += gather_pci_data(pdn, buf+n, len-n);
-                       dn = dn->sibling;
                }
        }
 
@@ -372,7 +373,7 @@
        return dn;
 }
 
-/** Mark all devices that are peers of this device as failed.
+/** Mark all devices that are children of this device as failed.
  *  Mark the device driver too, so that it can see the failure
  *  immediately; this is critical, since some drivers poll
  *  status registers in interrupts ... If a driver is polling,
@@ -380,9 +381,11 @@
  *  an interrupt context, which is bad.
  */
 
-static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
+static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
 {
-       while (dn) {
+       struct device_node *dn;
+
+       for_each_child_of_node(parent, dn) {
                if (PCI_DN(dn)) {
                        /* Mark the pci device driver too */
                        struct pci_dev *dev = PCI_DN(dn)->pcidev;
@@ -392,10 +395,8 @@
                        if (dev && dev->driver)
                                dev->error_state = pci_channel_io_frozen;
 
-                       if (dn->child)
-                               __eeh_mark_slot (dn->child, mode_flag);
+                       __eeh_mark_slot(dn, mode_flag);
                }
-               dn = dn->sibling;
        }
 }
 
@@ -415,19 +416,19 @@
        if (dev)
                dev->error_state = pci_channel_io_frozen;
 
-       __eeh_mark_slot (dn->child, mode_flag);
+       __eeh_mark_slot(dn, mode_flag);
 }
 
-static void __eeh_clear_slot (struct device_node *dn, int mode_flag)
+static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
 {
-       while (dn) {
+       struct device_node *dn;
+
+       for_each_child_of_node(parent, dn) {
                if (PCI_DN(dn)) {
                        PCI_DN(dn)->eeh_mode &= ~mode_flag;
                        PCI_DN(dn)->eeh_check_count = 0;
-                       if (dn->child)
-                               __eeh_clear_slot (dn->child, mode_flag);
+                       __eeh_clear_slot(dn, mode_flag);
                }
-               dn = dn->sibling;
        }
 }
 
@@ -444,7 +445,7 @@
 
        PCI_DN(dn)->eeh_mode &= ~mode_flag;
        PCI_DN(dn)->eeh_check_count = 0;
-       __eeh_clear_slot (dn->child, mode_flag);
+       __eeh_clear_slot(dn, mode_flag);
        spin_unlock_irqrestore(&confirm_error_lock, flags);
 }
 
@@ -480,6 +481,7 @@
                no_dn++;
                return 0;
        }
+       dn = find_device_pe(dn);
        pdn = PCI_DN(dn);
 
        /* Access to IO BARs might get this far and still not want checking. */
@@ -545,7 +547,7 @@
 
        /* Note that config-io to empty slots may fail;
         * they are empty when they don't have children. */
-       if ((rets[0] == 5) && (dn->child == NULL)) {
+       if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) {
                false_positives++;
                pdn->eeh_false_positives ++;
                rc = 0;
@@ -848,11 +850,8 @@
        if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
                __restore_bars (pdn);
 
-       dn = pdn->node->child;
-       while (dn) {
+       for_each_child_of_node(pdn->node, dn)
                eeh_restore_bars (PCI_DN(dn));
-               dn = dn->sibling;
-       }
 }
 
 /**
@@ -1130,7 +1129,8 @@
 void eeh_add_device_tree_early(struct device_node *dn)
 {
        struct device_node *sib;
-       for (sib = dn->child; sib; sib = sib->sibling)
+
+       for_each_child_of_node(dn, sib)
                eeh_add_device_tree_early(sib);
        eeh_add_device_early(dn);
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/eeh_driver.c powerpc.git/arch/powerpc/platforms/pseries/eeh_driver.c
--- linux-2.6.24/arch/powerpc/platforms/pseries/eeh_driver.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/eeh_driver.c     2008-01-28 20:25:49.000000000 +0100
@@ -310,8 +310,6 @@
        const char *location, *pci_str, *drv_str;
 
        frozen_dn = find_device_pe(event->dn);
-       frozen_bus = pcibios_find_pci_bus(frozen_dn);
-
        if (!frozen_dn) {
 
                location = of_get_property(event->dn, "ibm,loc-code", NULL);
@@ -321,6 +319,8 @@
                        location, pci_name(event->dev));
                return NULL;
        }
+
+       frozen_bus = pcibios_find_pci_bus(frozen_dn);
        location = of_get_property(frozen_dn, "ibm,loc-code", NULL);
        location = location ? location : "unknown";
 
@@ -354,13 +354,6 @@
        if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
                goto excess_failures;
 
-       /* Get the current PCI slot state. */
-       rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000);
-       if (rc < 0) {
-               printk(KERN_WARNING "EEH: Permanent failure\n");
-               goto hard_fail;
-       }
-
        printk(KERN_WARNING
           "EEH: This PCI device has failed %d times in the last hour:\n",
                frozen_pdn->eeh_freeze_count);
@@ -376,6 +369,14 @@
         */
        pci_walk_bus(frozen_bus, eeh_report_error, &result);
 
+       /* Get the current PCI slot state. This can take a long time,
+        * sometimes over 3 seconds for certain systems. */
+       rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000);
+       if (rc < 0) {
+               printk(KERN_WARNING "EEH: Permanent failure\n");
+               goto hard_fail;
+       }
+
        /* Since rtas may enable MMIO when posting the error log,
         * don't post the error log until after all dev drivers
         * have been informed.
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/iommu.c powerpc.git/arch/powerpc/platforms/pseries/iommu.c
--- linux-2.6.24/arch/powerpc/platforms/pseries/iommu.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/iommu.c  2008-01-28 20:25:49.000000000 +0100
@@ -251,7 +251,7 @@
        const unsigned long *basep;
        const u32 *sizep;
 
-       node = (struct device_node *)phb->arch_data;
+       node = phb->dn;
 
        basep = of_get_property(node, "linux,tce-base", NULL);
        sizep = of_get_property(node, "linux,tce-size", NULL);
@@ -296,11 +296,12 @@
 static void iommu_table_setparms_lpar(struct pci_controller *phb,
                                      struct device_node *dn,
                                      struct iommu_table *tbl,
-                                     const void *dma_window)
+                                     const void *dma_window,
+                                     int bussubno)
 {
        unsigned long offset, size;
 
-       tbl->it_busno  = PCI_DN(dn)->bussubno;
+       tbl->it_busno  = bussubno;
        of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size);
 
        tbl->it_base   = 0;
@@ -420,17 +421,10 @@
            pdn->full_name, ppci->iommu_table);
 
        if (!ppci->iommu_table) {
-               /* Bussubno hasn't been copied yet.
-                * Do it now because iommu_table_setparms_lpar needs it.
-                */
-
-               ppci->bussubno = bus->number;
-
                tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
                                   ppci->phb->node);
-
-               iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window);
-
+               iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window,
+                       bus->number);
                ppci->iommu_table = iommu_init_table(tbl, ppci->phb->node);
                DBG("  created table: %p\n", ppci->iommu_table);
        }
@@ -523,14 +517,10 @@
 
        pci = PCI_DN(pdn);
        if (!pci->iommu_table) {
-               /* iommu_table_setparms_lpar needs bussubno. */
-               pci->bussubno = pci->phb->bus->number;
-
                tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
                                   pci->phb->node);
-
-               iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window);
-
+               iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window,
+                       pci->phb->bus->number);
                pci->iommu_table = iommu_init_table(tbl, pci->phb->node);
                DBG("  created table: %p\n", pci->iommu_table);
        } else {
@@ -556,7 +546,7 @@
        case PSERIES_RECONFIG_REMOVE:
                if (pci && pci->iommu_table &&
                    of_get_property(np, "ibm,dma-window", NULL))
-                       iommu_free_table(np);
+                       iommu_free_table(pci->iommu_table, np->full_name);
                break;
        default:
                err = NOTIFY_DONE;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/pci_dlpar.c powerpc.git/arch/powerpc/platforms/pseries/pci_dlpar.c
--- linux-2.6.24/arch/powerpc/platforms/pseries/pci_dlpar.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/pci_dlpar.c      2008-01-28 20:25:49.000000000 +0100
@@ -83,7 +83,7 @@
 
 /* Must be called before pci_bus_add_devices */
 void
-pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
+pcibios_fixup_new_pci_devices(struct pci_bus *bus)
 {
        struct pci_dev *dev;
 
@@ -98,8 +98,6 @@
                        /* Fill device archdata and setup iommu table */
                        pcibios_setup_new_device(dev);
 
-                       if(fix_bus)
-                               pcibios_fixup_device_resources(dev, bus);
                        pci_read_irq_line(dev);
                        for (i = 0; i < PCI_NUM_RESOURCES; i++) {
                                struct resource *r = &dev->resource[i];
@@ -132,8 +130,8 @@
 
        pci_scan_child_bus(child_bus);
 
-       /* Fixup new pci devices without touching bus struct */
-       pcibios_fixup_new_pci_devices(child_bus, 0);
+       /* Fixup new pci devices */
+       pcibios_fixup_new_pci_devices(child_bus);
 
        /* Make the discovered devices available */
        pci_bus_add_devices(child_bus);
@@ -169,7 +167,7 @@
                /* use ofdt-based probe */
                of_scan_bus(dn, bus);
                if (!list_empty(&bus->devices)) {
-                       pcibios_fixup_new_pci_devices(bus, 0);
+                       pcibios_fixup_new_pci_devices(bus);
                        pci_bus_add_devices(bus);
                        eeh_add_device_tree_late(bus);
                }
@@ -178,7 +176,7 @@
                slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
                num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
                if (num) {
-                       pcibios_fixup_new_pci_devices(bus, 1);
+                       pcibios_fixup_new_pci_devices(bus);
                        pci_bus_add_devices(bus);
                        eeh_add_device_tree_late(bus);
                }
@@ -208,7 +206,7 @@
                eeh_add_device_tree_early(dn);
 
        scan_phb(phb);
-       pcibios_fixup_new_pci_devices(phb->bus, 0);
+       pcibios_fixup_new_pci_devices(phb->bus);
        pci_bus_add_devices(phb->bus);
        eeh_add_device_tree_late(phb->bus);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/plpar_wrappers.h powerpc.git/arch/powerpc/platforms/pseries/plpar_wrappers.h
--- linux-2.6.24/arch/powerpc/platforms/pseries/plpar_wrappers.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/plpar_wrappers.h 2008-01-28 20:25:49.000000000 +0100
@@ -8,11 +8,6 @@
        return plpar_hcall_norets(H_POLL_PENDING);
 }
 
-static inline long prod_processor(void)
-{
-       return plpar_hcall_norets(H_PROD);
-}
-
 static inline long cede_processor(void)
 {
        return plpar_hcall_norets(H_CEDE);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/smp.c powerpc.git/arch/powerpc/platforms/pseries/smp.c
--- linux-2.6.24/arch/powerpc/platforms/pseries/smp.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/smp.c    2008-01-28 20:25:49.000000000 +0100
@@ -46,6 +46,7 @@
 #include <asm/pSeries_reconfig.h>
 #include <asm/mpic.h>
 #include <asm/vdso_datapage.h>
+#include <asm/cputhreads.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
@@ -202,7 +203,7 @@
         */
        if (system_state < SYSTEM_RUNNING &&
            cpu_has_feature(CPU_FTR_SMT) &&
-           !smt_enabled_at_boot && nr % 2 != 0)
+           !smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
                return 0;
 
        return 1;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/xics.c powerpc.git/arch/powerpc/platforms/pseries/xics.c
--- linux-2.6.24/arch/powerpc/platforms/pseries/xics.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/xics.c   2008-01-28 20:25:49.000000000 +0100
@@ -87,19 +87,25 @@
 /* Direct HW low level accessors */
 
 
-static inline unsigned int direct_xirr_info_get(int n_cpu)
+static inline unsigned int direct_xirr_info_get(void)
 {
-       return in_be32(&xics_per_cpu[n_cpu]->xirr.word);
+       int cpu = smp_processor_id();
+
+       return in_be32(&xics_per_cpu[cpu]->xirr.word);
 }
 
-static inline void direct_xirr_info_set(int n_cpu, int value)
+static inline void direct_xirr_info_set(int value)
 {
-       out_be32(&xics_per_cpu[n_cpu]->xirr.word, value);
+       int cpu = smp_processor_id();
+
+       out_be32(&xics_per_cpu[cpu]->xirr.word, value);
 }
 
-static inline void direct_cppr_info(int n_cpu, u8 value)
+static inline void direct_cppr_info(u8 value)
 {
-       out_8(&xics_per_cpu[n_cpu]->xirr.bytes[0], value);
+       int cpu = smp_processor_id();
+
+       out_8(&xics_per_cpu[cpu]->xirr.bytes[0], value);
 }
 
 static inline void direct_qirr_info(int n_cpu, u8 value)
@@ -111,7 +117,7 @@
 /* LPAR low level accessors */
 
 
-static inline unsigned int lpar_xirr_info_get(int n_cpu)
+static inline unsigned int lpar_xirr_info_get(void)
 {
        unsigned long lpar_rc;
        unsigned long return_value;
@@ -122,7 +128,7 @@
        return (unsigned int)return_value;
 }
 
-static inline void lpar_xirr_info_set(int n_cpu, int value)
+static inline void lpar_xirr_info_set(int value)
 {
        unsigned long lpar_rc;
        unsigned long val64 = value & 0xffffffff;
@@ -133,7 +139,7 @@
                      val64);
 }
 
-static inline void lpar_cppr_info(int n_cpu, u8 value)
+static inline void lpar_cppr_info(u8 value)
 {
        unsigned long lpar_rc;
 
@@ -275,21 +281,19 @@
 
 static void xics_eoi_direct(unsigned int virq)
 {
-       int cpu = smp_processor_id();
        unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
        iosync();
-       direct_xirr_info_set(cpu, (0xff << 24) | irq);
+       direct_xirr_info_set((0xff << 24) | irq);
 }
 
 
 static void xics_eoi_lpar(unsigned int virq)
 {
-       int cpu = smp_processor_id();
        unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
        iosync();
-       lpar_xirr_info_set(cpu, (0xff << 24) | irq);
+       lpar_xirr_info_set((0xff << 24) | irq);
 }
 
 static inline unsigned int xics_remap_irq(unsigned int vec)
@@ -312,16 +316,12 @@
 
 static unsigned int xics_get_irq_direct(void)
 {
-       unsigned int cpu = smp_processor_id();
-
-       return xics_remap_irq(direct_xirr_info_get(cpu));
+       return xics_remap_irq(direct_xirr_info_get());
 }
 
 static unsigned int xics_get_irq_lpar(void)
 {
-       unsigned int cpu = smp_processor_id();
-
-       return xics_remap_irq(lpar_xirr_info_get(cpu));
+       return xics_remap_irq(lpar_xirr_info_get());
 }
 
 #ifdef CONFIG_SMP
@@ -387,12 +387,12 @@
 
 #endif /* CONFIG_SMP */
 
-static void xics_set_cpu_priority(int cpu, unsigned char cppr)
+static void xics_set_cpu_priority(unsigned char cppr)
 {
        if (firmware_has_feature(FW_FEATURE_LPAR))
-               lpar_cppr_info(cpu, cppr);
+               lpar_cppr_info(cppr);
        else
-               direct_cppr_info(cpu, cppr);
+               direct_cppr_info(cppr);
        iosync();
 }
 
@@ -440,9 +440,7 @@
 
 void xics_setup_cpu(void)
 {
-       int cpu = smp_processor_id();
-
-       xics_set_cpu_priority(cpu, 0xff);
+       xics_set_cpu_priority(0xff);
 
        /*
         * Put the calling processor into the GIQ.  This is really only
@@ -783,7 +781,7 @@
        unsigned int ipi;
        struct irq_desc *desc;
 
-       xics_set_cpu_priority(cpu, 0);
+       xics_set_cpu_priority(0);
 
        /*
         * Clear IPI
@@ -824,10 +822,11 @@
 void xics_migrate_irqs_away(void)
 {
        int status;
-       unsigned int irq, virq, cpu = smp_processor_id();
+       int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
+       unsigned int irq, virq;
 
        /* Reject any interrupt that was queued to us... */
-       xics_set_cpu_priority(cpu, 0);
+       xics_set_cpu_priority(0);
 
        /* remove ourselves from the global interrupt queue */
        status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
@@ -835,7 +834,7 @@
        WARN_ON(status < 0);
 
        /* Allow IPIs again... */
-       xics_set_cpu_priority(cpu, DEFAULT_PRIORITY);
+       xics_set_cpu_priority(DEFAULT_PRIORITY);
 
        for_each_irq(virq) {
                struct irq_desc *desc;
@@ -874,7 +873,7 @@
                 * The irq has to be migrated only in the single cpu
                 * case.
                 */
-               if (xics_status[0] != get_hard_smp_processor_id(cpu))
+               if (xics_status[0] != hw_cpu)
                        goto unlock;
 
                printk(KERN_WARNING "IRQ %u affinity broken off cpu %u\n",
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/platforms/pseries/xics.h powerpc.git/arch/powerpc/platforms/pseries/xics.h
--- linux-2.6.24/arch/powerpc/platforms/pseries/xics.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/platforms/pseries/xics.h   2008-01-28 20:25:49.000000000 +0100
@@ -21,9 +21,6 @@
 extern  void xics_request_IPIs(void);
 extern void xics_migrate_irqs_away(void);
 
-/* first argument is ignored for now*/
-void pSeriesLP_cppr_info(int n_cpu, u8 value);
-
 struct xics_ipi_struct {
        volatile unsigned long value;
 } ____cacheline_aligned;
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/Kconfig powerpc.git/arch/powerpc/sysdev/Kconfig
--- linux-2.6.24/arch/powerpc/sysdev/Kconfig    1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/Kconfig     2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,8 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+config PPC4xx_PCI_EXPRESS
+       bool
+       depends on PCI && 4xx
+       default n
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/Makefile powerpc.git/arch/powerpc/sysdev/Makefile
--- linux-2.6.24/arch/powerpc/sysdev/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/Makefile    2008-01-28 20:25:49.000000000 +0100
@@ -2,7 +2,7 @@
 EXTRA_CFLAGS                   += -mno-minimal-toc
 endif
 
-mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o
+mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
 obj-$(CONFIG_MPIC)             += mpic.o $(mpic-msi-obj-y)
 
 obj-$(CONFIG_PPC_MPC106)       += grackle.o
@@ -12,6 +12,7 @@
 obj-$(CONFIG_MMIO_NVRAM)       += mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)          += fsl_soc.o
 obj-$(CONFIG_FSL_PCI)          += fsl_pci.o
+obj-$(CONFIG_RAPIDIO)          += fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)    += tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)     += qe_lib/
 obj-$(CONFIG_PPC_BESTCOMM)     += bestcomm/
@@ -24,9 +25,13 @@
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
 obj-$(CONFIG_PPC_I8259)                += i8259.o
-obj-$(CONFIG_PPC_83xx)         += ipic.o
+obj-$(CONFIG_IPIC)             += ipic.o
 obj-$(CONFIG_4xx)              += uic.o
 obj-$(CONFIG_XILINX_VIRTEX)    += xilinx_intc.o
+obj-$(CONFIG_OF_RTC)           += of_rtc.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_4xx)              += ppc4xx_pci.o
+endif
 endif
 
 # Temporary hack until we have migrated to asm-powerpc
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/axonram.c powerpc.git/arch/powerpc/sysdev/axonram.c
--- linux-2.6.24/arch/powerpc/sysdev/axonram.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/axonram.c   2008-01-28 20:25:49.000000000 +0100
@@ -42,8 +42,9 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
 #include <asm/page.h>
 #include <asm/prom.h>
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/bestcomm/bestcomm.h powerpc.git/arch/powerpc/sysdev/bestcomm/bestcomm.h
--- linux-2.6.24/arch/powerpc/sysdev/bestcomm/bestcomm.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/bestcomm/bestcomm.h 2008-01-28 20:25:49.000000000 +0100
@@ -20,7 +20,7 @@
 
 
 /* ======================================================================== */
-/* Generic task managment                                                   */
+/* Generic task management                                                   */
 /* ======================================================================== */
 
 /**
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/commproc.c powerpc.git/arch/powerpc/sysdev/commproc.c
--- linux-2.6.24/arch/powerpc/sysdev/commproc.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/commproc.c  2008-01-28 20:25:49.000000000 +0100
@@ -240,6 +240,34 @@
 #endif
 }
 
+static DEFINE_SPINLOCK(cmd_lock);
+
+#define MAX_CR_CMD_LOOPS        10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+       int i, ret;
+       unsigned long flags;
+
+       if (command & 0xffffff0f)
+               return -EINVAL;
+
+       spin_lock_irqsave(&cmd_lock, flags);
+
+       ret = 0;
+       out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
+       for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+               if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+                       goto out;
+
+       printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+       ret = -EIO;
+out:
+       spin_unlock_irqrestore(&cmd_lock, flags);
+       return ret;
+}
+EXPORT_SYMBOL(cpm_command);
+
 /* We used to do this earlier, but have to postpone as long as possible
  * to ensure the kernel VM is now running.
  */
@@ -408,7 +436,7 @@
 #endif /* !CONFIG_PPC_CPM_NEW_BINDING */
 
 struct cpm_ioport16 {
-       __be16 dir, par, sor, dat, intr;
+       __be16 dir, par, odr_sor, dat, intr;
        __be16 res[3];
 };
 
@@ -438,6 +466,13 @@
        else
                clrbits32(&iop->par, pin);
 
+       if (port == CPM_PORTB) {
+               if (flags & CPM_PIN_OPENDRAIN)
+                       setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+               else
+                       clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+       }
+
        if (port == CPM_PORTE) {
                if (flags & CPM_PIN_SECONDARY)
                        setbits32(&iop->sor, pin);
@@ -471,11 +506,17 @@
        else
                clrbits16(&iop->par, pin);
 
+       if (port == CPM_PORTA) {
+               if (flags & CPM_PIN_OPENDRAIN)
+                       setbits16(&iop->odr_sor, pin);
+               else
+                       clrbits16(&iop->odr_sor, pin);
+       }
        if (port == CPM_PORTC) {
                if (flags & CPM_PIN_SECONDARY)
-                       setbits16(&iop->sor, pin);
+                       setbits16(&iop->odr_sor, pin);
                else
-                       clrbits16(&iop->sor, pin);
+                       clrbits16(&iop->odr_sor, pin);
        }
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/cpm2_common.c powerpc.git/arch/powerpc/sysdev/cpm2_common.c
--- linux-2.6.24/arch/powerpc/sysdev/cpm2_common.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/cpm2_common.c       2008-01-28 20:25:49.000000000 +0100
@@ -82,6 +82,31 @@
        cpmp = &cpm2_immr->im_cpm;
 }
 
+static DEFINE_SPINLOCK(cmd_lock);
+
+#define MAX_CR_CMD_LOOPS        10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+       int i, ret;
+       unsigned long flags;
+
+       spin_lock_irqsave(&cmd_lock, flags);
+
+       ret = 0;
+       out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
+       for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+               if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+                       goto out;
+
+       printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+       ret = -EIO;
+out:
+       spin_unlock_irqrestore(&cmd_lock, flags);
+       return ret;
+}
+EXPORT_SYMBOL(cpm_command);
+
 /* Set a baud rate generator.  This needs lots of work.  There are
  * eight BRGs, which can be connected to the CPM channels or output
  * as clocks.  The BRGs are in two different block of internal
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/fsl_pci.c powerpc.git/arch/powerpc/sysdev/fsl_pci.c
--- linux-2.6.24/arch/powerpc/sysdev/fsl_pci.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/fsl_pci.c   2008-01-28 20:25:49.000000000 +0100
@@ -33,8 +33,8 @@
        struct ccsr_pci __iomem *pci;
        int i;
 
-       pr_debug("PCI memory map start 0x%x, size 0x%x\n", rsrc->start,
-                       rsrc->end - rsrc->start + 1);
+       pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
+                   (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
        pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
 
        /* Disable all windows (except powar0 since its ignored) */
@@ -46,17 +46,17 @@
        /* Setup outbound MEM window */
        for(i = 0; i < 3; i++)
                if (hose->mem_resources[i].flags & IORESOURCE_MEM){
-                       pr_debug("PCI MEM resource start 0x%08x, size 0x%08x.\n",
-                               hose->mem_resources[i].start,
-                               hose->mem_resources[i].end
-                                 - hose->mem_resources[i].start + 1);
-                       out_be32(&pci->pow[i+1].potar,
-                               (hose->mem_resources[i].start >> 12)
-                               & 0x000fffff);
+                       resource_size_t pci_addr_start =
+                                hose->mem_resources[i].start -
+                                hose->pci_mem_offset;
+                       pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
+                               (u64)hose->mem_resources[i].start,
+                               (u64)hose->mem_resources[i].end
+                                 - (u64)hose->mem_resources[i].start + 1);
+                       out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
                        out_be32(&pci->pow[i+1].potear, 0);
                        out_be32(&pci->pow[i+1].powbar,
-                               (hose->mem_resources[i].start >> 12)
-                               & 0x000fffff);
+                               (hose->mem_resources[i].start >> 12));
                        /* Enable, Mem R/W */
                        out_be32(&pci->pow[i+1].powar, 0x80044000
                                | (__ilog2(hose->mem_resources[i].end
@@ -65,15 +65,14 @@
 
        /* Setup outbound IO window */
        if (hose->io_resource.flags & IORESOURCE_IO){
-               pr_debug("PCI IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
-                       hose->io_resource.start,
-                       hose->io_resource.end - hose->io_resource.start + 1,
-                       hose->io_base_phys);
-               out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12)
-                               & 0x000fffff);
+               pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
+                        "phy base 0x%016llx.\n",
+                       (u64)hose->io_resource.start,
+                       (u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
+                       (u64)hose->io_base_phys);
+               out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
                out_be32(&pci->pow[i+1].potear, 0);
-               out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12)
-                               & 0x000fffff);
+               out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
                /* Enable, IO R/W */
                out_be32(&pci->pow[i+1].powar, 0x80088000
                        | (__ilog2(hose->io_resource.end
@@ -107,55 +106,17 @@
        }
 }
 
-static void __init quirk_fsl_pcie_transparent(struct pci_dev *dev)
-{
-       struct resource *res;
-       int i, res_idx = PCI_BRIDGE_RESOURCES;
-       struct pci_controller *hose;
+static int fsl_pcie_bus_fixup;
 
+static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+{
        /* if we aren't a PCIe don't bother */
        if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
                return ;
 
-       /*
-        * Make the bridge be transparent.
-        */
-       dev->transparent = 1;
-
-       hose = pci_bus_to_host(dev->bus);
-       if (!hose) {
-               printk(KERN_ERR "Can't find hose for bus %d\n",
-                      dev->bus->number);
-               return;
-       }
-
-       /* Clear out any of the virtual P2P bridge registers */
-       pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
-       pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 0);
-       pci_write_config_byte(dev, PCI_IO_BASE, 0x10);
-       pci_write_config_byte(dev, PCI_IO_LIMIT, 0);
-       pci_write_config_word(dev, PCI_MEMORY_BASE, 0x10);
-       pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
-       pci_write_config_word(dev, PCI_PREF_BASE_UPPER32, 0x0);
-       pci_write_config_word(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
-       pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
-       pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
-
-       if (hose->io_resource.flags) {
-               res = &dev->resource[res_idx++];
-               res->start = hose->io_resource.start;
-               res->end = hose->io_resource.end;
-               res->flags = hose->io_resource.flags;
-               update_bridge_resource(dev, res);
-       }
-
-       for (i = 0; i < 3; i++) {
-               res = &dev->resource[res_idx + i];
-               res->start = hose->mem_resources[i].start;
-               res->end = hose->mem_resources[i].end;
-               res->flags = hose->mem_resources[i].flags;
-               update_bridge_resource(dev, res);
-       }
+       dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+       fsl_pcie_bus_fixup = 1;
+       return ;
 }
 
 int __init fsl_pcie_check_link(struct pci_controller *hose)
@@ -172,11 +133,24 @@
        struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
        int i;
 
-       /* deal with bogus pci_bus when we don't have anything connected on PCIe */
-       if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
-               if (bus->parent) {
-                       for (i = 0; i < 4; ++i)
-                               bus->resource[i] = bus->parent->resource[i];
+       if ((bus->parent == hose->bus) &&
+           ((fsl_pcie_bus_fixup &&
+             early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
+            (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
+       {
+               for (i = 0; i < 4; ++i) {
+                       struct resource *res = bus->resource[i];
+                       struct resource *par = bus->parent->resource[i];
+                       if (res) {
+                               res->start = 0;
+                               res->end   = 0;
+                               res->flags = 0;
+                       }
+                       if (res && par) {
+                               res->start = par->start;
+                               res->end   = par->end;
+                               res->flags = par->flags;
+                       }
                }
        }
 }
@@ -202,7 +176,7 @@
                printk(KERN_WARNING "Can't get bus-range for %s, assume"
                        " bus 0\n", dev->full_name);
 
-       pci_assign_all_buses = 1;
+       ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
        hose = pcibios_alloc_controller(dev);
        if (!hose)
                return -ENOMEM;
@@ -222,7 +196,7 @@
                        hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
        }
 
-       printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx."
+       printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
                "Firmware bus number: %d->%d\n",
                (unsigned long long)rsrc.start, hose->first_busno,
                hose->last_busno);
@@ -240,23 +214,23 @@
        return 0;
 }
 
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/fsl_rio.c powerpc.git/arch/powerpc/sysdev/fsl_rio.c
--- linux-2.6.24/arch/powerpc/sysdev/fsl_rio.c  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/fsl_rio.c   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,932 @@
+/*
+ * MPC85xx RapidIO support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+
+#include <asm/io.h>
+
+#define RIO_REGS_BASE          (CCSRBAR + 0xc0000)
+#define RIO_ATMU_REGS_OFFSET   0x10c00
+#define RIO_MSG_REGS_OFFSET    0x11000
+#define RIO_MAINT_WIN_SIZE     0x400000
+#define RIO_DBELL_WIN_SIZE     0x1000
+
+#define RIO_MSG_OMR_MUI                0x00000002
+#define RIO_MSG_OSR_TE         0x00000080
+#define RIO_MSG_OSR_QOI                0x00000020
+#define RIO_MSG_OSR_QFI                0x00000010
+#define RIO_MSG_OSR_MUB                0x00000004
+#define RIO_MSG_OSR_EOMI       0x00000002
+#define RIO_MSG_OSR_QEI                0x00000001
+
+#define RIO_MSG_IMR_MI         0x00000002
+#define RIO_MSG_ISR_TE         0x00000080
+#define RIO_MSG_ISR_QFI                0x00000010
+#define RIO_MSG_ISR_DIQI       0x00000001
+
+#define RIO_MSG_DESC_SIZE      32
+#define RIO_MSG_BUFFER_SIZE    4096
+#define RIO_MIN_TX_RING_SIZE   2
+#define RIO_MAX_TX_RING_SIZE   2048
+#define RIO_MIN_RX_RING_SIZE   2
+#define RIO_MAX_RX_RING_SIZE   2048
+
+#define DOORBELL_DMR_DI                0x00000002
+#define DOORBELL_DSR_TE                0x00000080
+#define DOORBELL_DSR_QFI       0x00000010
+#define DOORBELL_DSR_DIQI      0x00000001
+#define DOORBELL_TID_OFFSET    0x03
+#define DOORBELL_SID_OFFSET    0x05
+#define DOORBELL_INFO_OFFSET   0x06
+
+#define DOORBELL_MESSAGE_SIZE  0x08
+#define DBELL_SID(x)           (*(u8 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x)           (*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x)           (*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_atmu_regs {
+       u32 rowtar;
+       u32 pad1;
+       u32 rowbar;
+       u32 pad2;
+       u32 rowar;
+       u32 pad3[3];
+};
+
+struct rio_msg_regs {
+       u32 omr;
+       u32 osr;
+       u32 pad1;
+       u32 odqdpar;
+       u32 pad2;
+       u32 osar;
+       u32 odpr;
+       u32 odatr;
+       u32 odcr;
+       u32 pad3;
+       u32 odqepar;
+       u32 pad4[13];
+       u32 imr;
+       u32 isr;
+       u32 pad5;
+       u32 ifqdpar;
+       u32 pad6;
+       u32 ifqepar;
+       u32 pad7[250];
+       u32 dmr;
+       u32 dsr;
+       u32 pad8;
+       u32 dqdpar;
+       u32 pad9;
+       u32 dqepar;
+       u32 pad10[26];
+       u32 pwmr;
+       u32 pwsr;
+       u32 pad11;
+       u32 pwqbar;
+};
+
+struct rio_tx_desc {
+       u32 res1;
+       u32 saddr;
+       u32 dport;
+       u32 dattr;
+       u32 res2;
+       u32 res3;
+       u32 dwcnt;
+       u32 res4;
+};
+
+static u32 regs_win;
+static struct rio_atmu_regs *atmu_regs;
+static struct rio_atmu_regs *maint_atmu_regs;
+static struct rio_atmu_regs *dbell_atmu_regs;
+static u32 dbell_win;
+static u32 maint_win;
+static struct rio_msg_regs *msg_regs;
+
+static struct rio_dbell_ring {
+       void *virt;
+       dma_addr_t phys;
+} dbell_ring;
+
+static struct rio_msg_tx_ring {
+       void *virt;
+       dma_addr_t phys;
+       void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+       dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+       int tx_slot;
+       int size;
+       void *dev_id;
+} msg_tx_ring;
+
+static struct rio_msg_rx_ring {
+       void *virt;
+       dma_addr_t phys;
+       void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+       int rx_slot;
+       int size;
+       void *dev_id;
+} msg_rx_ring;
+
+/**
+ * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+{
+       pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+                index, destid, data);
+       out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
+       out_be16((void *)(dbell_win), data);
+
+       return 0;
+}
+
+/**
+ * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a MPC85xx local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+{
+       pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+                offset);
+       *data = in_be32((void *)(regs_win + offset));
+
+       return 0;
+}
+
+/**
+ * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a MPC85xx local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+{
+       pr_debug
+           ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+            index, offset, data);
+       out_be32((void *)(regs_win + offset), data);
+
+       return 0;
+}
+
+/**
+ * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
+                       u32 * val)
+{
+       u8 *data;
+
+       pr_debug
+           ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+            index, destid, hopcount, offset, len);
+       out_be32((void *)&maint_atmu_regs->rowtar,
+                (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+       data = (u8 *) maint_win + offset;
+       switch (len) {
+       case 1:
+               *val = in_8((u8 *) data);
+               break;
+       case 2:
+               *val = in_be16((u16 *) data);
+               break;
+       default:
+               *val = in_be32((u32 *) data);
+               break;
+       }
+
+       return 0;
+}
+
+/**
+ * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
+                        int len, u32 val)
+{
+       u8 *data;
+       pr_debug
+           ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+            index, destid, hopcount, offset, len, val);
+       out_be32((void *)&maint_atmu_regs->rowtar,
+                (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+       data = (u8 *) maint_win + offset;
+       switch (len) {
+       case 1:
+               out_8((u8 *) data, val);
+               break;
+       case 2:
+               out_be16((u16 *) data, val);
+               break;
+       default:
+               out_be32((u32 *) data, val);
+               break;
+       }
+
+       return 0;
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+                       void *buffer, size_t len)
+{
+       u32 omr;
+       struct rio_tx_desc *desc =
+           (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+       int ret = 0;
+
+       pr_debug
+           ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n",
+            rdev->destid, mbox, (int)buffer, len);
+
+       if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+               ret = -EINVAL;
+               goto out;
+       }
+
+       /* Copy and clear rest of buffer */
+       memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+       if (len < (RIO_MAX_MSG_SIZE - 4))
+               memset((void *)((u32) msg_tx_ring.
+                               virt_buffer[msg_tx_ring.tx_slot] + len), 0,
+                      RIO_MAX_MSG_SIZE - len);
+
+       /* Set mbox field for message */
+       desc->dport = mbox & 0x3;
+
+       /* Enable EOMI interrupt, set priority, and set destid */
+       desc->dattr = 0x28000000 | (rdev->destid << 2);
+
+       /* Set transfer size aligned to next power of 2 (in double words) */
+       desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+       /* Set snooping and source buffer address */
+       desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+
+       /* Increment enqueue pointer */
+       omr = in_be32((void *)&msg_regs->omr);
+       out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+       /* Go to next descriptor */
+       if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
+               msg_tx_ring.tx_slot = 0;
+
+      out:
+       return ret;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
+
+/**
+ * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+mpc85xx_rio_tx_handler(int irq, void *dev_instance)
+{
+       int osr;
+       struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+       osr = in_be32((void *)&msg_regs->osr);
+
+       if (osr & RIO_MSG_OSR_TE) {
+               pr_info("RIO: outbound message transmission error\n");
+               out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+               goto out;
+       }
+
+       if (osr & RIO_MSG_OSR_QOI) {
+               pr_info("RIO: outbound message queue overflow\n");
+               out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+               goto out;
+       }
+
+       if (osr & RIO_MSG_OSR_EOMI) {
+               u32 dqp = in_be32((void *)&msg_regs->odqdpar);
+               int slot = (dqp - msg_tx_ring.phys) >> 5;
+               port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+
+               /* Ack the end-of-message interrupt */
+               out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+       }
+
+      out:
+       return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+       int i, j, rc = 0;
+
+       if ((entries < RIO_MIN_TX_RING_SIZE) ||
+           (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+               rc = -EINVAL;
+               goto out;
+       }
+
+       /* Initialize shadow copy ring */
+       msg_tx_ring.dev_id = dev_id;
+       msg_tx_ring.size = entries;
+
+       for (i = 0; i < msg_tx_ring.size; i++) {
+               if (!
+                   (msg_tx_ring.virt_buffer[i] =
+                    dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+                                       &msg_tx_ring.phys_buffer[i],
+                                       GFP_KERNEL))) {
+                       rc = -ENOMEM;
+                       for (j = 0; j < msg_tx_ring.size; j++)
+                               if (msg_tx_ring.virt_buffer[j])
+                                       dma_free_coherent(NULL,
+                                                         RIO_MSG_BUFFER_SIZE,
+                                                         msg_tx_ring.
+                                                         virt_buffer[j],
+                                                         msg_tx_ring.
+                                                         phys_buffer[j]);
+                       goto out;
+               }
+       }
+
+       /* Initialize outbound message descriptor ring */
+       if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
+                                                   msg_tx_ring.size *
+                                                   RIO_MSG_DESC_SIZE,
+                                                   &msg_tx_ring.phys,
+                                                   GFP_KERNEL))) {
+               rc = -ENOMEM;
+               goto out_dma;
+       }
+       memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+       msg_tx_ring.tx_slot = 0;
+
+       /* Point dequeue/enqueue pointers at first entry in ring */
+       out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
+       out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+
+       /* Configure for snooping */
+       out_be32((void *)&msg_regs->osar, 0x00000004);
+
+       /* Clear interrupt status */
+       out_be32((void *)&msg_regs->osr, 0x000000b3);
+
+       /* Hook up outbound message handler */
+       if ((rc =
+            request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
+                        "msg_tx", (void *)mport)) < 0)
+               goto out_irq;
+
+       /*
+        * Configure outbound message unit
+        *      Snooping
+        *      Interrupts (all enabled, except QEIE)
+        *      Chaining mode
+        *      Disable
+        */
+       out_be32((void *)&msg_regs->omr, 0x00100220);
+
+       /* Set number of entries */
+       out_be32((void *)&msg_regs->omr,
+                in_be32((void *)&msg_regs->omr) |
+                ((get_bitmask_order(entries) - 2) << 12));
+
+       /* Now enable the unit */
+       out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+
+      out:
+       return rc;
+
+      out_irq:
+       dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+                         msg_tx_ring.virt, msg_tx_ring.phys);
+
+      out_dma:
+       for (i = 0; i < msg_tx_ring.size; i++)
+               dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+                                 msg_tx_ring.virt_buffer[i],
+                                 msg_tx_ring.phys_buffer[i]);
+
+       return rc;
+}
+
+/**
+ * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+       /* Disable inbound message unit */
+       out_be32((void *)&msg_regs->omr, 0);
+
+       /* Free ring */
+       dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+                         msg_tx_ring.virt, msg_tx_ring.phys);
+
+       /* Free interrupt */
+       free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+}
+
+/**
+ * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+mpc85xx_rio_rx_handler(int irq, void *dev_instance)
+{
+       int isr;
+       struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+       isr = in_be32((void *)&msg_regs->isr);
+
+       if (isr & RIO_MSG_ISR_TE) {
+               pr_info("RIO: inbound message reception error\n");
+               out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+               goto out;
+       }
+
+       /* XXX Need to check/dispatch until queue empty */
+       if (isr & RIO_MSG_ISR_DIQI) {
+               /*
+                * We implement *only* mailbox 0, but can receive messages
+                * for any mailbox/letter to that mailbox destination. So,
+                * make the callback with an unknown/invalid mailbox number
+                * argument.
+                */
+               port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+
+               /* Ack the queueing interrupt */
+               out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+       }
+
+      out:
+       return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+       int i, rc = 0;
+
+       if ((entries < RIO_MIN_RX_RING_SIZE) ||
+           (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+               rc = -EINVAL;
+               goto out;
+       }
+
+       /* Initialize client buffer ring */
+       msg_rx_ring.dev_id = dev_id;
+       msg_rx_ring.size = entries;
+       msg_rx_ring.rx_slot = 0;
+       for (i = 0; i < msg_rx_ring.size; i++)
+               msg_rx_ring.virt_buffer[i] = NULL;
+
+       /* Initialize inbound message ring */
+       if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
+                                                   msg_rx_ring.size *
+                                                   RIO_MAX_MSG_SIZE,
+                                                   &msg_rx_ring.phys,
+                                                   GFP_KERNEL))) {
+               rc = -ENOMEM;
+               goto out;
+       }
+
+       /* Point dequeue/enqueue pointers at first entry in ring */
+       out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
+       out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+
+       /* Clear interrupt status */
+       out_be32((void *)&msg_regs->isr, 0x00000091);
+
+       /* Hook up inbound message handler */
+       if ((rc =
+            request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
+                        "msg_rx", (void *)mport)) < 0) {
+               dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+                                 msg_tx_ring.virt_buffer[i],
+                                 msg_tx_ring.phys_buffer[i]);
+               goto out;
+       }
+
+       /*
+        * Configure inbound message unit:
+        *      Snooping
+        *      4KB max message size
+        *      Unmask all interrupt sources
+        *      Disable
+        */
+       out_be32((void *)&msg_regs->imr, 0x001b0060);
+
+       /* Set number of queue entries */
+       out_be32((void *)&msg_regs->imr,
+                in_be32((void *)&msg_regs->imr) |
+                ((get_bitmask_order(entries) - 2) << 12));
+
+       /* Now enable the unit */
+       out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+
+      out:
+       return rc;
+}
+
+/**
+ * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+       /* Disable inbound message unit */
+       out_be32((void *)&msg_regs->imr, 0);
+
+       /* Free ring */
+       dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+                         msg_rx_ring.virt, msg_rx_ring.phys);
+
+       /* Free interrupt */
+       free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+}
+
+/**
+ * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+       int rc = 0;
+
+       pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+                msg_rx_ring.rx_slot);
+
+       if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
+               printk(KERN_ERR
+                      "RIO: error adding inbound buffer %d, buffer exists\n",
+                      msg_rx_ring.rx_slot);
+               rc = -EINVAL;
+               goto out;
+       }
+
+       msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
+       if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
+               msg_rx_ring.rx_slot = 0;
+
+      out:
+       return rc;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
+
+/**
+ * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
+{
+       u32 imr;
+       u32 phys_buf, virt_buf;
+       void *buf = NULL;
+       int buf_idx;
+
+       phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+
+       /* If no more messages, then bail out */
+       if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+               goto out2;
+
+       virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
+       buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+       buf = msg_rx_ring.virt_buffer[buf_idx];
+
+       if (!buf) {
+               printk(KERN_ERR
+                      "RIO: inbound message copy failed, no buffers\n");
+               goto out1;
+       }
+
+       /* Copy max message size, caller is expected to allocate that big */
+       memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+       /* Clear the available buffer */
+       msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+      out1:
+       imr = in_be32((void *)&msg_regs->imr);
+       out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+
+      out2:
+       return buf;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
+
+/**
+ * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
+{
+       int dsr;
+       struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+       dsr = in_be32((void *)&msg_regs->dsr);
+
+       if (dsr & DOORBELL_DSR_TE) {
+               pr_info("RIO: doorbell reception error\n");
+               out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+               goto out;
+       }
+
+       if (dsr & DOORBELL_DSR_QFI) {
+               pr_info("RIO: doorbell queue full\n");
+               out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+               goto out;
+       }
+
+       /* XXX Need to check/dispatch until queue empty */
+       if (dsr & DOORBELL_DSR_DIQI) {
+               u32 dmsg =
+                   (u32) dbell_ring.virt +
+                   (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
+               u32 dmr;
+               struct rio_dbell *dbell;
+               int found = 0;
+
+               pr_debug
+                   ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+                    DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+               list_for_each_entry(dbell, &port->dbells, node) {
+                       if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+                           (dbell->res->end >= DBELL_INF(dmsg))) {
+                               found = 1;
+                               break;
+                       }
+               }
+               if (found) {
+                       dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
+                                   DBELL_INF(dmsg));
+               } else {
+                       pr_debug
+                           ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+                            DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+               }
+               dmr = in_be32((void *)&msg_regs->dmr);
+               out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
+               out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+       }
+
+      out:
+       return IRQ_HANDLED;
+}
+
+/**
+ * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+{
+       int rc = 0;
+
+       /* Map outbound doorbell window immediately after maintenance window */
+       if (!(dbell_win =
+             (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+                           RIO_DBELL_WIN_SIZE))) {
+               printk(KERN_ERR
+                      "RIO: unable to map outbound doorbell window\n");
+               rc = -ENOMEM;
+               goto out;
+       }
+
+       /* Initialize inbound doorbells */
+       if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
+                                                  512 * DOORBELL_MESSAGE_SIZE,
+                                                  &dbell_ring.phys,
+                                                  GFP_KERNEL))) {
+               printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+               rc = -ENOMEM;
+               iounmap((void *)dbell_win);
+               goto out;
+       }
+
+       /* Point dequeue/enqueue pointers at first entry in ring */
+       out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
+       out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+
+       /* Clear interrupt status */
+       out_be32((void *)&msg_regs->dsr, 0x00000091);
+
+       /* Hook up doorbell handler */
+       if ((rc =
+            request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
+                        "dbell_rx", (void *)mport) < 0)) {
+               iounmap((void *)dbell_win);
+               dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+                                 dbell_ring.virt, dbell_ring.phys);
+               printk(KERN_ERR
+                      "MPC85xx RIO: unable to request inbound doorbell irq");
+               goto out;
+       }
+
+       /* Configure doorbells for snooping, 512 entries, and enable */
+       out_be32((void *)&msg_regs->dmr, 0x00108161);
+
+      out:
+       return rc;
+}
+
+static char *cmdline = NULL;
+
+static int mpc85xx_rio_get_hdid(int index)
+{
+       /* XXX Need to parse multiple entries in some format */
+       if (!cmdline)
+               return -1;
+
+       return simple_strtol(cmdline, NULL, 0);
+}
+
+static int mpc85xx_rio_get_cmdline(char *s)
+{
+       if (!s)
+               return 0;
+
+       cmdline = s;
+       return 1;
+}
+
+__setup("riohdid=", mpc85xx_rio_get_cmdline);
+
+/**
+ * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
+ * @law_start: Starting physical address of RapidIO LAW
+ * @law_size: Size of RapidIO LAW
+ *
+ * Initializes MPC85xx RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+void mpc85xx_rio_setup(int law_start, int law_size)
+{
+       struct rio_ops *ops;
+       struct rio_mport *port;
+
+       ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+       ops->lcread = mpc85xx_local_config_read;
+       ops->lcwrite = mpc85xx_local_config_write;
+       ops->cread = mpc85xx_rio_config_read;
+       ops->cwrite = mpc85xx_rio_config_write;
+       ops->dsend = mpc85xx_rio_doorbell_send;
+
+       port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+       port->id = 0;
+       port->index = 0;
+       INIT_LIST_HEAD(&port->dbells);
+       port->iores.start = law_start;
+       port->iores.end = law_start + law_size;
+       port->iores.flags = IORESOURCE_MEM;
+
+       rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+       rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+       rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+       strcpy(port->name, "RIO0 mport");
+
+       port->ops = ops;
+       port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+
+       rio_register_mport(port);
+
+       regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
+       atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
+       maint_atmu_regs = atmu_regs + 1;
+       dbell_atmu_regs = atmu_regs + 2;
+       msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+
+       /* Configure maintenance transaction window */
+       out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
+       out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+
+       maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+
+       /* Configure outbound doorbell window */
+       out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
+       out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
+       mpc85xx_rio_doorbell_init(port);
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/fsl_rio.h powerpc.git/arch/powerpc/sysdev/fsl_rio.h
--- linux-2.6.24/arch/powerpc/sysdev/fsl_rio.h  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/fsl_rio.h   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,20 @@
+/*
+ * MPC85xx RapidIO definitions
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
+#define __PPC_SYSLIB_PPC85XX_RIO_H
+
+#include <linux/init.h>
+
+extern void mpc85xx_rio_setup(int law_start, int law_size);
+
+#endif                         /* __PPC_SYSLIB_PPC85XX_RIO_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/fsl_soc.c powerpc.git/arch/powerpc/sysdev/fsl_soc.c
--- linux-2.6.24/arch/powerpc/sysdev/fsl_soc.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/fsl_soc.c   2008-01-28 20:25:49.000000000 +0100
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
+#include <linux/phy_fixed.h>
 #include <linux/spi/spi.h>
 #include <linux/fsl_devices.h>
 #include <linux/fs_enet_pd.h>
@@ -54,10 +55,18 @@
        soc = of_find_node_by_type(NULL, "soc");
        if (soc) {
                int size;
-               const void *prop = of_get_property(soc, "reg", &size);
+               u32 naddr;
+               const u32 *prop = of_get_property(soc, "#address-cells", &size);
 
+               if (prop && size == 4)
+                       naddr = *prop;
+               else
+                       naddr = 2;
+
+               prop = of_get_property(soc, "ranges", &size);
                if (prop)
-                       immrbase = of_translate_address(soc, prop);
+                       immrbase = of_translate_address(soc, prop + naddr);
+
                of_node_put(soc);
        }
 
@@ -130,17 +139,51 @@
 EXPORT_SYMBOL(get_baudrate);
 #endif /* CONFIG_CPM2 */
 
-static int __init gfar_mdio_of_init(void)
+#ifdef CONFIG_FIXED_PHY
+static int __init of_add_fixed_phys(void)
 {
+       int ret;
        struct device_node *np;
-       unsigned int i;
+       u32 *fixed_link;
+       struct fixed_phy_status status = {};
+
+       for_each_node_by_name(np, "ethernet") {
+               fixed_link  = (u32 *)of_get_property(np, "fixed-link", NULL);
+               if (!fixed_link)
+                       continue;
+
+               status.link = 1;
+               status.duplex = fixed_link[1];
+               status.speed = fixed_link[2];
+               status.pause = fixed_link[3];
+               status.asym_pause = fixed_link[4];
+
+               ret = fixed_phy_add(PHY_POLL, fixed_link[0], &status);
+               if (ret) {
+                       of_node_put(np);
+                       return ret;
+               }
+       }
+
+       return 0;
+}
+arch_initcall(of_add_fixed_phys);
+#endif /* CONFIG_FIXED_PHY */
+
+static int __init gfar_mdio_of_init(void)
+{
+       struct device_node *np = NULL;
        struct platform_device *mdio_dev;
        struct resource res;
        int ret;
 
-       for (np = NULL, i = 0;
-            (np = of_find_compatible_node(np, "mdio", "gianfar")) != NULL;
-            i++) {
+       np = of_find_compatible_node(np, NULL, "fsl,gianfar-mdio");
+
+       /* try the deprecated version */
+       if (!np)
+               np = of_find_compatible_node(np, "mdio", "gianfar");
+
+       if (np) {
                int k;
                struct device_node *child = NULL;
                struct gianfar_mdio_data mdio_data;
@@ -179,11 +222,13 @@
                        goto unreg;
        }
 
+       of_node_put(np);
        return 0;
 
 unreg:
        platform_device_unregister(mdio_dev);
 err:
+       of_node_put(np);
        return ret;
 }
 
@@ -193,7 +238,6 @@
 static const char *gfar_rx_intr = "rx";
 static const char *gfar_err_intr = "error";
 
-
 static int __init gfar_of_init(void)
 {
        struct device_node *np;
@@ -277,29 +321,43 @@
                        gfar_data.interface = PHY_INTERFACE_MODE_MII;
 
                ph = of_get_property(np, "phy-handle", NULL);
-               phy = of_find_node_by_phandle(*ph);
+               if (ph == NULL) {
+                       u32 *fixed_link;
 
-               if (phy == NULL) {
-                       ret = -ENODEV;
-                       goto unreg;
-               }
+                       fixed_link = (u32 *)of_get_property(np, "fixed-link",
+                                                          NULL);
+                       if (!fixed_link) {
+                               ret = -ENODEV;
+                               goto unreg;
+                       }
 
-               mdio = of_get_parent(phy);
+                       gfar_data.bus_id = 0;
+                       gfar_data.phy_id = fixed_link[0];
+               } else {
+                       phy = of_find_node_by_phandle(*ph);
+
+                       if (phy == NULL) {
+                               ret = -ENODEV;
+                               goto unreg;
+                       }
+
+                       mdio = of_get_parent(phy);
+
+                       id = of_get_property(phy, "reg", NULL);
+                       ret = of_address_to_resource(mdio, 0, &res);
+                       if (ret) {
+                               of_node_put(phy);
+                               of_node_put(mdio);
+                               goto unreg;
+                       }
+
+                       gfar_data.phy_id = *id;
+                       gfar_data.bus_id = res.start;
 
-               id = of_get_property(phy, "reg", NULL);
-               ret = of_address_to_resource(mdio, 0, &res);
-               if (ret) {
                        of_node_put(phy);
                        of_node_put(mdio);
-                       goto unreg;
                }
 
-               gfar_data.phy_id = *id;
-               gfar_data.bus_id = res.start;
-
-               of_node_put(phy);
-               of_node_put(mdio);
-
                ret =
                    platform_device_add_data(gfar_dev, &gfar_data,
                                             sizeof(struct
@@ -390,13 +448,11 @@
 static int __init fsl_i2c_of_init(void)
 {
        struct device_node *np;
-       unsigned int i;
+       unsigned int i = 0;
        struct platform_device *i2c_dev;
        int ret;
 
-       for (np = NULL, i = 0;
-            (np = of_find_compatible_node(np, "i2c", "fsl-i2c")) != NULL;
-            i++) {
+       for_each_compatible_node(np, NULL, "fsl-i2c") {
                struct resource r[2];
                struct fsl_i2c_platform_data i2c_data;
                const unsigned char *flags = NULL;
@@ -432,7 +488,7 @@
                if (ret)
                        goto unreg;
 
-               of_register_i2c_devices(np, i);
+               of_register_i2c_devices(np, i++);
        }
 
        return 0;
@@ -528,14 +584,12 @@
 static int __init fsl_usb_of_init(void)
 {
        struct device_node *np;
-       unsigned int i;
+       unsigned int i = 0;
        struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
                *usb_dev_dr_client = NULL;
        int ret;
 
-       for (np = NULL, i = 0;
-            (np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL;
-            i++) {
+       for_each_compatible_node(np, NULL, "fsl-usb2-mph") {
                struct resource r[2];
                struct fsl_usb2_platform_data usb_data;
                const unsigned char *prop = NULL;
@@ -578,11 +632,10 @@
                                                    fsl_usb2_platform_data));
                if (ret)
                        goto unreg_mph;
+               i++;
        }
 
-       for (np = NULL;
-            (np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL;
-            i++) {
+       for_each_compatible_node(np, NULL, "fsl-usb2-dr") {
                struct resource r[2];
                struct fsl_usb2_platform_data usb_data;
                const unsigned char *prop = NULL;
@@ -654,6 +707,7 @@
                                                fsl_usb2_platform_data))))
                                goto unreg_dr;
                }
+               i++;
        }
        return 0;
 
@@ -1125,13 +1179,12 @@
 
 static int __init fsl_pcmcia_of_init(void)
 {
-       struct device_node *np = NULL;
+       struct device_node *np;
        /*
         * Register all the devices which type is "pcmcia"
         */
-       while ((np = of_find_compatible_node(np,
-                       "pcmcia", "fsl,pq-pcmcia")) != NULL)
-                           of_platform_device_create(np, "m8xx-pcmcia", NULL);
+       for_each_compatible_node(np, "pcmcia", "fsl,pq-pcmcia")
+               of_platform_device_create(np, "m8xx-pcmcia", NULL);
        return 0;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/grackle.c powerpc.git/arch/powerpc/sysdev/grackle.c
--- linux-2.6.24/arch/powerpc/sysdev/grackle.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/grackle.c   2008-01-28 20:25:49.000000000 +0100
@@ -57,7 +57,7 @@
 {
        setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
        if (machine_is_compatible("PowerMac1,1"))
-               pci_assign_all_buses = 1;
+               ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
        if (machine_is_compatible("AAPL,PowerBook1998"))
                grackle_set_loop_snoop(hose, 1);
 #if 0  /* Disabled for now, HW problems ??? */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/ipic.c powerpc.git/arch/powerpc/sysdev/ipic.c
--- linux-2.6.24/arch/powerpc/sysdev/ipic.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/ipic.c      2008-01-28 20:25:49.000000000 +0100
@@ -30,11 +30,67 @@
 #include "ipic.h"
 
 static struct ipic * primary_ipic;
+static struct irq_chip ipic_level_irq_chip, ipic_edge_irq_chip;
 static DEFINE_SPINLOCK(ipic_lock);
 
 static struct ipic_info ipic_info[] = {
+       [1] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 16,
+               .prio_mask = 0,
+       },
+       [2] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 17,
+               .prio_mask = 1,
+       },
+       [3] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 18,
+               .prio_mask = 2,
+       },
+       [4] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 19,
+               .prio_mask = 3,
+       },
+       [5] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 20,
+               .prio_mask = 4,
+       },
+       [6] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 21,
+               .prio_mask = 5,
+       },
+       [7] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 22,
+               .prio_mask = 6,
+       },
+       [8] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_C,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 23,
+               .prio_mask = 7,
+       },
        [9] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_D,
                .force  = IPIC_SIFCR_H,
@@ -42,7 +98,6 @@
                .prio_mask = 0,
        },
        [10] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_D,
                .force  = IPIC_SIFCR_H,
@@ -50,15 +105,27 @@
                .prio_mask = 1,
        },
        [11] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_D,
                .force  = IPIC_SIFCR_H,
                .bit    = 26,
                .prio_mask = 2,
        },
+       [12] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_D,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 27,
+               .prio_mask = 3,
+       },
+       [13] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_D,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 28,
+               .prio_mask = 4,
+       },
        [14] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_D,
                .force  = IPIC_SIFCR_H,
@@ -66,7 +133,6 @@
                .prio_mask = 5,
        },
        [15] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_D,
                .force  = IPIC_SIFCR_H,
@@ -74,7 +140,6 @@
                .prio_mask = 6,
        },
        [16] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_D,
                .force  = IPIC_SIFCR_H,
@@ -82,7 +147,7 @@
                .prio_mask = 7,
        },
        [17] = {
-               .pend   = IPIC_SEPNR,
+               .ack    = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SEFCR,
@@ -90,7 +155,7 @@
                .prio_mask = 5,
        },
        [18] = {
-               .pend   = IPIC_SEPNR,
+               .ack    = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SEFCR,
@@ -98,7 +163,7 @@
                .prio_mask = 6,
        },
        [19] = {
-               .pend   = IPIC_SEPNR,
+               .ack    = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SEFCR,
@@ -106,7 +171,7 @@
                .prio_mask = 7,
        },
        [20] = {
-               .pend   = IPIC_SEPNR,
+               .ack    = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SEFCR,
@@ -114,7 +179,7 @@
                .prio_mask = 4,
        },
        [21] = {
-               .pend   = IPIC_SEPNR,
+               .ack    = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SEFCR,
@@ -122,7 +187,7 @@
                .prio_mask = 5,
        },
        [22] = {
-               .pend   = IPIC_SEPNR,
+               .ack    = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SEFCR,
@@ -130,7 +195,7 @@
                .prio_mask = 6,
        },
        [23] = {
-               .pend   = IPIC_SEPNR,
+               .ack    = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SEFCR,
@@ -138,7 +203,6 @@
                .prio_mask = 7,
        },
        [32] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
@@ -146,7 +210,6 @@
                .prio_mask = 0,
        },
        [33] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
@@ -154,7 +217,6 @@
                .prio_mask = 1,
        },
        [34] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
@@ -162,7 +224,6 @@
                .prio_mask = 2,
        },
        [35] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
@@ -170,7 +231,6 @@
                .prio_mask = 3,
        },
        [36] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
@@ -178,7 +238,6 @@
                .prio_mask = 4,
        },
        [37] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
@@ -186,7 +245,6 @@
                .prio_mask = 5,
        },
        [38] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
@@ -194,15 +252,69 @@
                .prio_mask = 6,
        },
        [39] = {
-               .pend   = IPIC_SIPNR_H,
                .mask   = IPIC_SIMSR_H,
                .prio   = IPIC_SIPRR_A,
                .force  = IPIC_SIFCR_H,
                .bit    = 7,
                .prio_mask = 7,
        },
+       [40] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 8,
+               .prio_mask = 0,
+       },
+       [41] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 9,
+               .prio_mask = 1,
+       },
+       [42] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 10,
+               .prio_mask = 2,
+       },
+       [43] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 11,
+               .prio_mask = 3,
+       },
+       [44] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 12,
+               .prio_mask = 4,
+       },
+       [45] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 13,
+               .prio_mask = 5,
+       },
+       [46] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 14,
+               .prio_mask = 6,
+       },
+       [47] = {
+               .mask   = IPIC_SIMSR_H,
+               .prio   = IPIC_SIPRR_B,
+               .force  = IPIC_SIFCR_H,
+               .bit    = 15,
+               .prio_mask = 7,
+       },
        [48] = {
-               .pend   = IPIC_SEPNR,
                .mask   = IPIC_SEMSR,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SEFCR,
@@ -210,7 +322,6 @@
                .prio_mask = 4,
        },
        [64] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SIFCR_L,
@@ -218,7 +329,6 @@
                .prio_mask = 0,
        },
        [65] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SIFCR_L,
@@ -226,7 +336,6 @@
                .prio_mask = 1,
        },
        [66] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SIFCR_L,
@@ -234,7 +343,6 @@
                .prio_mask = 2,
        },
        [67] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_A,
                .force  = IPIC_SIFCR_L,
@@ -242,7 +350,6 @@
                .prio_mask = 3,
        },
        [68] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SIFCR_L,
@@ -250,7 +357,6 @@
                .prio_mask = 0,
        },
        [69] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SIFCR_L,
@@ -258,7 +364,6 @@
                .prio_mask = 1,
        },
        [70] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SIFCR_L,
@@ -266,7 +371,6 @@
                .prio_mask = 2,
        },
        [71] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = IPIC_SMPRR_B,
                .force  = IPIC_SIFCR_L,
@@ -274,91 +378,120 @@
                .prio_mask = 3,
        },
        [72] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 8,
        },
        [73] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 9,
        },
        [74] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 10,
        },
        [75] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 11,
        },
        [76] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 12,
        },
        [77] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 13,
        },
        [78] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 14,
        },
        [79] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 15,
        },
        [80] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 16,
        },
+       [81] = {
+               .mask   = IPIC_SIMSR_L,
+               .prio   = 0,
+               .force  = IPIC_SIFCR_L,
+               .bit    = 17,
+       },
+       [82] = {
+               .mask   = IPIC_SIMSR_L,
+               .prio   = 0,
+               .force  = IPIC_SIFCR_L,
+               .bit    = 18,
+       },
+       [83] = {
+               .mask   = IPIC_SIMSR_L,
+               .prio   = 0,
+               .force  = IPIC_SIFCR_L,
+               .bit    = 19,
+       },
        [84] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 20,
        },
        [85] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 21,
        },
+       [86] = {
+               .mask   = IPIC_SIMSR_L,
+               .prio   = 0,
+               .force  = IPIC_SIFCR_L,
+               .bit    = 22,
+       },
+       [87] = {
+               .mask   = IPIC_SIMSR_L,
+               .prio   = 0,
+               .force  = IPIC_SIFCR_L,
+               .bit    = 23,
+       },
+       [88] = {
+               .mask   = IPIC_SIMSR_L,
+               .prio   = 0,
+               .force  = IPIC_SIFCR_L,
+               .bit    = 24,
+       },
+       [89] = {
+               .mask   = IPIC_SIMSR_L,
+               .prio   = 0,
+               .force  = IPIC_SIFCR_L,
+               .bit    = 25,
+       },
        [90] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
                .bit    = 26,
        },
        [91] = {
-               .pend   = IPIC_SIPNR_L,
                .mask   = IPIC_SIMSR_L,
                .prio   = 0,
                .force  = IPIC_SIFCR_L,
@@ -412,6 +545,10 @@
        temp &= ~(1 << (31 - ipic_info[src].bit));
        ipic_write(ipic->regs, ipic_info[src].mask, temp);
 
+       /* mb() can't guarantee that masking is finished.  But it does finish
+        * for nearly all cases. */
+       mb();
+
        spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
@@ -424,9 +561,13 @@
 
        spin_lock_irqsave(&ipic_lock, flags);
 
-       temp = ipic_read(ipic->regs, ipic_info[src].pend);
+       temp = ipic_read(ipic->regs, ipic_info[src].ack);
        temp |= (1 << (31 - ipic_info[src].bit));
-       ipic_write(ipic->regs, ipic_info[src].pend, temp);
+       ipic_write(ipic->regs, ipic_info[src].ack, temp);
+
+       /* mb() can't guarantee that ack is finished.  But it does finish
+        * for nearly all cases. */
+       mb();
 
        spin_unlock_irqrestore(&ipic_lock, flags);
 }
@@ -444,9 +585,13 @@
        temp &= ~(1 << (31 - ipic_info[src].bit));
        ipic_write(ipic->regs, ipic_info[src].mask, temp);
 
-       temp = ipic_read(ipic->regs, ipic_info[src].pend);
+       temp = ipic_read(ipic->regs, ipic_info[src].ack);
        temp |= (1 << (31 - ipic_info[src].bit));
-       ipic_write(ipic->regs, ipic_info[src].pend, temp);
+       ipic_write(ipic->regs, ipic_info[src].ack, temp);
+
+       /* mb() can't guarantee that ack is finished.  But it does finish
+        * for nearly all cases. */
+       mb();
 
        spin_unlock_irqrestore(&ipic_lock, flags);
 }
@@ -468,14 +613,22 @@
                        flow_type);
                return -EINVAL;
        }
+       /* ipic supports only edge mode on external interrupts */
+       if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !ipic_info[src].ack) {
+               printk(KERN_ERR "ipic: edge sense not supported on internal "
+                               "interrupts\n");
+               return -EINVAL;
+       }
 
        desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
        desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
        if (flow_type & IRQ_TYPE_LEVEL_LOW)  {
                desc->status |= IRQ_LEVEL;
                desc->handle_irq = handle_level_irq;
+               desc->chip = &ipic_level_irq_chip;
        } else {
                desc->handle_irq = handle_edge_irq;
+               desc->chip = &ipic_edge_irq_chip;
        }
 
        /* only EXT IRQ senses are programmable on ipic
@@ -500,7 +653,16 @@
        return 0;
 }
 
-static struct irq_chip ipic_irq_chip = {
+/* level interrupts and edge interrupts have different ack operations */
+static struct irq_chip ipic_level_irq_chip = {
+       .typename       = " IPIC  ",
+       .unmask         = ipic_unmask_irq,
+       .mask           = ipic_mask_irq,
+       .mask_ack       = ipic_mask_irq,
+       .set_type       = ipic_set_irq_type,
+};
+
+static struct irq_chip ipic_edge_irq_chip = {
        .typename       = " IPIC  ",
        .unmask         = ipic_unmask_irq,
        .mask           = ipic_mask_irq,
@@ -519,13 +681,9 @@
                         irq_hw_number_t hw)
 {
        struct ipic *ipic = h->host_data;
-       struct irq_chip *chip;
-
-       /* Default chip */
-       chip = &ipic->hc_irq;
 
        set_irq_chip_data(virq, ipic);
-       set_irq_chip_and_handler(virq, chip, handle_level_irq);
+       set_irq_chip_and_handler(virq, &ipic_level_irq_chip, handle_level_irq);
 
        /* Set default irq type */
        set_irq_type(virq, IRQ_TYPE_NONE);
@@ -584,7 +742,6 @@
        ipic->regs = ioremap(res.start, res.end - res.start + 1);
 
        ipic->irqhost->host_data = ipic;
-       ipic->hc_irq = ipic_irq_chip;
 
        /* init hw */
        ipic_write(ipic->regs, IPIC_SICNR, 0x0);
@@ -593,6 +750,10 @@
         * configure SICFR accordingly */
        if (flags & IPIC_SPREADMODE_GRP_A)
                temp |= SICFR_IPSA;
+       if (flags & IPIC_SPREADMODE_GRP_B)
+               temp |= SICFR_IPSB;
+       if (flags & IPIC_SPREADMODE_GRP_C)
+               temp |= SICFR_IPSC;
        if (flags & IPIC_SPREADMODE_GRP_D)
                temp |= SICFR_IPSD;
        if (flags & IPIC_SPREADMODE_MIX_A)
@@ -600,7 +761,7 @@
        if (flags & IPIC_SPREADMODE_MIX_B)
                temp |= SICFR_MPSB;
 
-       ipic_write(ipic->regs, IPIC_SICNR, temp);
+       ipic_write(ipic->regs, IPIC_SICFR, temp);
 
        /* handle MCP route */
        temp = 0;
@@ -672,10 +833,12 @@
 
 void ipic_set_default_priority(void)
 {
-       ipic_write(primary_ipic->regs, IPIC_SIPRR_A, IPIC_SIPRR_A_DEFAULT);
-       ipic_write(primary_ipic->regs, IPIC_SIPRR_D, IPIC_SIPRR_D_DEFAULT);
-       ipic_write(primary_ipic->regs, IPIC_SMPRR_A, IPIC_SMPRR_A_DEFAULT);
-       ipic_write(primary_ipic->regs, IPIC_SMPRR_B, IPIC_SMPRR_B_DEFAULT);
+       ipic_write(primary_ipic->regs, IPIC_SIPRR_A, IPIC_PRIORITY_DEFAULT);
+       ipic_write(primary_ipic->regs, IPIC_SIPRR_B, IPIC_PRIORITY_DEFAULT);
+       ipic_write(primary_ipic->regs, IPIC_SIPRR_C, IPIC_PRIORITY_DEFAULT);
+       ipic_write(primary_ipic->regs, IPIC_SIPRR_D, IPIC_PRIORITY_DEFAULT);
+       ipic_write(primary_ipic->regs, IPIC_SMPRR_A, IPIC_PRIORITY_DEFAULT);
+       ipic_write(primary_ipic->regs, IPIC_SMPRR_B, IPIC_PRIORITY_DEFAULT);
 }
 
 void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/ipic.h powerpc.git/arch/powerpc/sysdev/ipic.h
--- linux-2.6.24/arch/powerpc/sysdev/ipic.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/ipic.h      2008-01-28 20:25:49.000000000 +0100
@@ -23,13 +23,12 @@
 #define IPIC_IRQ_EXT7 23
 
 /* Default Priority Registers */
-#define IPIC_SIPRR_A_DEFAULT 0x05309770
-#define IPIC_SIPRR_D_DEFAULT 0x05309770
-#define IPIC_SMPRR_A_DEFAULT 0x05309770
-#define IPIC_SMPRR_B_DEFAULT 0x05309770
+#define IPIC_PRIORITY_DEFAULT 0x05309770
 
 /* System Global Interrupt Configuration Register */
 #define        SICFR_IPSA      0x00010000
+#define        SICFR_IPSB      0x00020000
+#define        SICFR_IPSC      0x00040000
 #define        SICFR_IPSD      0x00080000
 #define        SICFR_MPSA      0x00200000
 #define        SICFR_MPSB      0x00400000
@@ -45,13 +44,11 @@
 
        /* The remapper for this IPIC */
        struct irq_host         *irqhost;
-
-       /* The "linux" controller struct */
-       struct irq_chip         hc_irq;
 };
 
 struct ipic_info {
-       u8      pend;           /* pending register offset from base */
+       u8      ack;            /* pending register offset from base if the irq
+                                  supports ack operation */
        u8      mask;           /* mask register offset from base */
        u8      prio;           /* priority register offset from base */
        u8      force;          /* force register offset from base */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/mmio_nvram.c powerpc.git/arch/powerpc/sysdev/mmio_nvram.c
--- linux-2.6.24/arch/powerpc/sysdev/mmio_nvram.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/mmio_nvram.c        2008-01-28 20:25:49.000000000 +0100
@@ -99,7 +99,7 @@
        nvram_addr = r.start;
        mmio_nvram_len = r.end - r.start + 1;
        if ( (!mmio_nvram_len) || (!nvram_addr) ) {
-               printk(KERN_WARNING "nvram: address or lenght is 0\n");
+               printk(KERN_WARNING "nvram: address or length is 0\n");
                ret = -EIO;
                goto out;
        }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/mpic.c powerpc.git/arch/powerpc/sysdev/mpic.c
--- linux-2.6.24/arch/powerpc/sysdev/mpic.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/mpic.c      2008-01-28 20:25:49.000000000 +0100
@@ -83,6 +83,7 @@
                MPIC_CPU_WHOAMI,
                MPIC_CPU_INTACK,
                MPIC_CPU_EOI,
+               MPIC_CPU_MCACK,
 
                MPIC_IRQ_BASE,
                MPIC_IRQ_STRIDE,
@@ -121,6 +122,7 @@
                TSI108_CPU_WHOAMI,
                TSI108_CPU_INTACK,
                TSI108_CPU_EOI,
+               TSI108_CPU_MCACK,
 
                TSI108_IRQ_BASE,
                TSI108_IRQ_STRIDE,
@@ -265,7 +267,7 @@
  */
 
 
-static void _mpic_map_mmio(struct mpic *mpic, unsigned long phys_addr,
+static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
                           struct mpic_reg_bank *rb, unsigned int offset,
                           unsigned int size)
 {
@@ -285,7 +287,7 @@
        BUG_ON(!DCR_MAP_OK(rb->dhost));
 }
 
-static inline void mpic_map(struct mpic *mpic, unsigned long phys_addr,
+static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
                            struct mpic_reg_bank *rb, unsigned int offset,
                            unsigned int size)
 {
@@ -612,12 +614,11 @@
 }
 
 #ifdef CONFIG_SMP
-static irqreturn_t mpic_ipi_action(int irq, void *dev_id)
+static irqreturn_t mpic_ipi_action(int irq, void *data)
 {
-       struct mpic *mpic;
+       long ipi = (long)data;
 
-       mpic = mpic_find(irq, NULL);
-       smp_message_recv(mpic_irq_to_hw(irq) - mpic->ipi_vecs[0]);
+       smp_message_recv(ipi);
 
        return IRQ_HANDLED;
 }
@@ -842,6 +843,24 @@
        return 0;
 }
 
+void mpic_set_vector(unsigned int virq, unsigned int vector)
+{
+       struct mpic *mpic = mpic_from_irq(virq);
+       unsigned int src = mpic_irq_to_hw(virq);
+       unsigned int vecpri;
+
+       DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n",
+           mpic, virq, src, vector);
+
+       if (src >= mpic->irq_count)
+               return;
+
+       vecpri = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
+       vecpri = vecpri & ~MPIC_INFO(VECPRI_VECTOR_MASK);
+       vecpri |= vector;
+       mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
+}
+
 static struct irq_chip mpic_irq_chip = {
        .mask           = mpic_mask_irq,
        .unmask         = mpic_unmask_irq,
@@ -1109,6 +1128,11 @@
                        mb();
        }
 
+       if (flags & MPIC_ENABLE_MCK)
+               mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
+                          mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
+                          | MPIC_GREG_GCONF_MCK);
+
        /* Read feature register, calculate num CPUs and, for non-ISU
         * MPICs, num sources as well. On ISU MPICs, sources are counted
         * as ISUs are added
@@ -1230,6 +1254,8 @@
                mpic_u3msi_init(mpic);
        }
 
+       mpic_pasemi_msi_init(mpic);
+
        for (i = 0; i < mpic->num_sources; i++) {
                /* start with vector = source number, and masked */
                u32 vecpri = MPIC_VECPRI_MASK | i |
@@ -1253,6 +1279,11 @@
                           mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
                           | MPIC_GREG_GCONF_8259_PTHROU_DIS);
 
+       if (mpic->flags & MPIC_NO_BIAS)
+               mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
+                       mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
+                       | MPIC_GREG_GCONF_NO_BIAS);
+
        /* Set current processor priority to 0 */
        mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0);
 
@@ -1419,13 +1450,13 @@
                       mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
 }
 
-unsigned int mpic_get_one_irq(struct mpic *mpic)
+static unsigned int _mpic_get_one_irq(struct mpic *mpic, int reg)
 {
        u32 src;
 
-       src = mpic_cpu_read(MPIC_INFO(CPU_INTACK)) & MPIC_INFO(VECPRI_VECTOR_MASK);
+       src = mpic_cpu_read(reg) & MPIC_INFO(VECPRI_VECTOR_MASK);
 #ifdef DEBUG_LOW
-       DBG("%s: get_one_irq(): %d\n", mpic->name, src);
+       DBG("%s: get_one_irq(reg 0x%x): %d\n", mpic->name, reg, src);
 #endif
        if (unlikely(src == mpic->spurious_vec)) {
                if (mpic->flags & MPIC_SPV_EOI)
@@ -1443,6 +1474,11 @@
        return irq_linear_revmap(mpic->irqhost, src);
 }
 
+unsigned int mpic_get_one_irq(struct mpic *mpic)
+{
+       return _mpic_get_one_irq(mpic, MPIC_INFO(CPU_INTACK));
+}
+
 unsigned int mpic_get_irq(void)
 {
        struct mpic *mpic = mpic_primary;
@@ -1452,12 +1488,20 @@
        return mpic_get_one_irq(mpic);
 }
 
+unsigned int mpic_get_mcirq(void)
+{
+       struct mpic *mpic = mpic_primary;
+
+       BUG_ON(mpic == NULL);
+
+       return _mpic_get_one_irq(mpic, MPIC_INFO(CPU_MCACK));
+}
 
 #ifdef CONFIG_SMP
 void mpic_request_ipis(void)
 {
        struct mpic *mpic = mpic_primary;
-       int i, err;
+       long i, err;
        static char *ipi_names[] = {
                "IPI0 (call function)",
                "IPI1 (reschedule)",
@@ -1472,14 +1516,14 @@
                unsigned int vipi = irq_create_mapping(mpic->irqhost,
                                                       mpic->ipi_vecs[0] + i);
                if (vipi == NO_IRQ) {
-                       printk(KERN_ERR "Failed to map IPI %d\n", i);
+                       printk(KERN_ERR "Failed to map IPI %ld\n", i);
                        break;
                }
                err = request_irq(vipi, mpic_ipi_action,
                                  IRQF_DISABLED|IRQF_PERCPU,
-                                 ipi_names[i], mpic);
+                                 ipi_names[i], (void *)i);
                if (err) {
-                       printk(KERN_ERR "Request of irq %d for IPI %d failed\n",
+                       printk(KERN_ERR "Request of irq %d for IPI %ld failed\n",
                               vipi, i);
                        break;
                }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/mpic.h powerpc.git/arch/powerpc/sysdev/mpic.h
--- linux-2.6.24/arch/powerpc/sysdev/mpic.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/mpic.h      2008-01-28 20:25:49.000000000 +0100
@@ -17,6 +17,7 @@
 extern irq_hw_number_t mpic_msi_alloc_hwirqs(struct mpic *mpic, int num);
 extern void mpic_msi_free_hwirqs(struct mpic *mpic, int offset, int num);
 extern int mpic_u3msi_init(struct mpic *mpic);
+extern int mpic_pasemi_msi_init(struct mpic *mpic);
 #else
 static inline void mpic_msi_reserve_hwirq(struct mpic *mpic,
                                          irq_hw_number_t hwirq)
@@ -28,12 +29,15 @@
 {
        return -1;
 }
+
+static inline int mpic_pasemi_msi_init(struct mpic *mpic)
+{
+       return -1;
+}
 #endif
 
 extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
-extern void mpic_end_irq(unsigned int irq);
-extern void mpic_mask_irq(unsigned int irq);
-extern void mpic_unmask_irq(unsigned int irq);
+extern void mpic_set_vector(unsigned int virq, unsigned int vector);
 extern void mpic_set_affinity(unsigned int irq, cpumask_t cpumask);
 
 #endif /* _POWERPC_SYSDEV_MPIC_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/mpic_pasemi_msi.c powerpc.git/arch/powerpc/sysdev/mpic_pasemi_msi.c
--- linux-2.6.24/arch/powerpc/sysdev/mpic_pasemi_msi.c  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/mpic_pasemi_msi.c   2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2007, Olof Johansson, PA Semi
+ *
+ * Based on arch/powerpc/sysdev/mpic_u3msi.c:
+ *
+ * Copyright 2006, Segher Boessenkool, IBM Corporation.
+ * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/msi.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+
+#include "mpic.h"
+
+/* Allocate 16 interrupts per device, to give an alignment of 16,
+ * since that's the size of the grouping w.r.t. affinity. If someone
+ * needs more than 32 MSI's down the road we'll have to rethink this,
+ * but it should be OK for now.
+ */
+#define ALLOC_CHUNK 16
+
+#define PASEMI_MSI_ADDR 0xfc080000
+
+/* A bit ugly, can we get this from the pci_dev somehow? */
+static struct mpic *msi_mpic;
+
+
+static void mpic_pasemi_msi_mask_irq(unsigned int irq)
+{
+       pr_debug("mpic_pasemi_msi_mask_irq %d\n", irq);
+       mask_msi_irq(irq);
+       mpic_mask_irq(irq);
+}
+
+static void mpic_pasemi_msi_unmask_irq(unsigned int irq)
+{
+       pr_debug("mpic_pasemi_msi_unmask_irq %d\n", irq);
+       mpic_unmask_irq(irq);
+       unmask_msi_irq(irq);
+}
+
+static struct irq_chip mpic_pasemi_msi_chip = {
+       .shutdown       = mpic_pasemi_msi_mask_irq,
+       .mask           = mpic_pasemi_msi_mask_irq,
+       .unmask         = mpic_pasemi_msi_unmask_irq,
+       .eoi            = mpic_end_irq,
+       .set_type       = mpic_set_irq_type,
+       .set_affinity   = mpic_set_affinity,
+       .typename       = "PASEMI-MSI ",
+};
+
+static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+       if (type == PCI_CAP_ID_MSIX)
+               pr_debug("pasemi_msi: MSI-X untested, trying anyway\n");
+
+       return 0;
+}
+
+static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
+{
+       struct msi_desc *entry;
+
+       pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev);
+
+       list_for_each_entry(entry, &pdev->msi_list, list) {
+               if (entry->irq == NO_IRQ)
+                       continue;
+
+               set_irq_msi(entry->irq, NULL);
+               mpic_msi_free_hwirqs(msi_mpic, virq_to_hw(entry->irq),
+                                    ALLOC_CHUNK);
+               irq_dispose_mapping(entry->irq);
+       }
+
+       return;
+}
+
+static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+       irq_hw_number_t hwirq;
+       unsigned int virq;
+       struct msi_desc *entry;
+       struct msi_msg msg;
+       u64 addr;
+
+       pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
+                pdev, nvec, type);
+
+       msg.address_hi = 0;
+       msg.address_lo = PASEMI_MSI_ADDR;
+
+       list_for_each_entry(entry, &pdev->msi_list, list) {
+               /* Allocate 16 interrupts for now, since that's the grouping for
+                * affinity. This can be changed later if it turns out 32 is too
+                * few MSIs for someone, but restrictions will apply to how the
+                * sources can be changed independently.
+                */
+               hwirq = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
+               if (hwirq < 0) {
+                       pr_debug("pasemi_msi: failed allocating hwirq\n");
+                       return hwirq;
+               }
+
+               virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
+               if (virq == NO_IRQ) {
+                       pr_debug("pasemi_msi: failed mapping hwirq 0x%lx\n", hwirq);
+                       mpic_msi_free_hwirqs(msi_mpic, hwirq, ALLOC_CHUNK);
+                       return -ENOSPC;
+               }
+
+               /* Vector on MSI is really an offset, the hardware adds
+                * it to the value written at the magic address. So set
+                * it to 0 to remain sane.
+                */
+               mpic_set_vector(virq, 0);
+
+               set_irq_msi(virq, entry);
+               set_irq_chip(virq, &mpic_pasemi_msi_chip);
+               set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
+
+               pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%lx) addr 0x%lx\n",
+                         virq, hwirq, addr);
+
+               /* Likewise, the device writes [0...511] into the target
+                * register to generate MSI [512...1023]
+                */
+               msg.data = hwirq-0x200;
+               write_msi_msg(virq, &msg);
+       }
+
+       return 0;
+}
+
+int mpic_pasemi_msi_init(struct mpic *mpic)
+{
+       int rc;
+
+       if (!mpic->irqhost->of_node ||
+           !of_device_is_compatible(mpic->irqhost->of_node,
+                                    "pasemi,pwrficient-openpic"))
+               return -ENODEV;
+
+       rc = mpic_msi_init_allocator(mpic);
+       if (rc) {
+               pr_debug("pasemi_msi: Error allocating bitmap!\n");
+               return rc;
+       }
+
+       pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n");
+
+       msi_mpic = mpic;
+       WARN_ON(ppc_md.setup_msi_irqs);
+       ppc_md.setup_msi_irqs = pasemi_msi_setup_msi_irqs;
+       ppc_md.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs;
+       ppc_md.msi_check_device = pasemi_msi_check_device;
+
+       return 0;
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/mv64x60_dev.c powerpc.git/arch/powerpc/sysdev/mv64x60_dev.c
--- linux-2.6.24/arch/powerpc/sysdev/mv64x60_dev.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/mv64x60_dev.c       2008-01-28 20:25:49.000000000 +0100
@@ -241,7 +241,7 @@
 
        /* only register the shared platform device the first time through */
        if (id == 0 && (err = eth_register_shared_pdev(np)))
-               return err;;
+               return err;
 
        memset(r, 0, sizeof(r));
        of_irq_to_resource(np, 0, &r[0]);
@@ -451,22 +451,19 @@
        int id;
        int err;
 
-       for (id = 0;
-            (np = of_find_compatible_node(np, "serial", "marvell,mpsc")); id++)
-               if ((err = mv64x60_mpsc_device_setup(np, id)))
+       id = 0;
+       for_each_compatible_node(np, "serial", "marvell,mpsc")
+               if ((err = mv64x60_mpsc_device_setup(np, id++)))
                        goto error;
 
-       for (id = 0;
-            (np = of_find_compatible_node(np, "network",
-                                          "marvell,mv64x60-eth"));
-            id++)
-               if ((err = mv64x60_eth_device_setup(np, id)))
+       id = 0;
+       for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
+               if ((err = mv64x60_eth_device_setup(np, id++)))
                        goto error;
 
-       for (id = 0;
-            (np = of_find_compatible_node(np, "i2c", "marvell,mv64x60-i2c"));
-            id++)
-               if ((err = mv64x60_i2c_device_setup(np, id)))
+       id = 0;
+       for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
+               if ((err = mv64x60_i2c_device_setup(np, id++)))
                        goto error;
 
        /* support up to one watchdog timer */
@@ -477,7 +474,6 @@
                of_node_put(np);
        }
 
-
        return 0;
 
 error:
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/mv64x60_pci.c powerpc.git/arch/powerpc/sysdev/mv64x60_pci.c
--- linux-2.6.24/arch/powerpc/sysdev/mv64x60_pci.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/mv64x60_pci.c       2008-01-28 20:25:49.000000000 +0100
@@ -164,8 +164,8 @@
 
 void __init mv64x60_pci_init(void)
 {
-       struct device_node *np = NULL;
+       struct device_node *np;
 
-       while ((np = of_find_compatible_node(np, "pci", "marvell,mv64x60-pci")))
+       for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
                mv64x60_add_bridge(np);
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/mv64x60_udbg.c powerpc.git/arch/powerpc/sysdev/mv64x60_udbg.c
--- linux-2.6.24/arch/powerpc/sysdev/mv64x60_udbg.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/mv64x60_udbg.c      2008-01-28 20:25:49.000000000 +0100
@@ -85,10 +85,10 @@
        if (!stdout)
                return;
 
-       for (np = NULL;
-            (np = of_find_compatible_node(np, "serial", "marvell,mpsc")); )
+       for_each_compatible_node(np, "serial", "marvell,mpsc") {
                if (np == stdout)
                        break;
+       }
 
        of_node_put(stdout);
        if (!np)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/of_rtc.c powerpc.git/arch/powerpc/sysdev/of_rtc.c
--- linux-2.6.24/arch/powerpc/sysdev/of_rtc.c   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/of_rtc.c    2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,59 @@
+/*
+ * Instantiate mmio-mapped RTC chips based on device tree information
+ *
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct {
+       const char *compatible;
+       char *plat_name;
+} of_rtc_table[] = {
+       { "ds1743-nvram", "rtc-ds1742" },
+};
+
+void __init of_instantiate_rtc(void)
+{
+       struct device_node *node;
+       int err;
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(of_rtc_table); i++) {
+               char *plat_name = of_rtc_table[i].plat_name;
+
+               for_each_compatible_node(node, NULL,
+                                        of_rtc_table[i].compatible) {
+                       struct resource *res;
+
+                       res = kmalloc(sizeof(*res), GFP_KERNEL);
+                       if (!res) {
+                               printk(KERN_ERR "OF RTC: Out of memory "
+                                      "allocating resource structure for %s\n",
+                                      node->full_name);
+                               continue;
+                       }
+
+                       err = of_address_to_resource(node, 0, res);
+                       if (err) {
+                               printk(KERN_ERR "OF RTC: Error "
+                                      "translating resources for %s\n",
+                                      node->full_name);
+                               continue;
+                       }
+
+                       printk(KERN_INFO "OF_RTC: %s is a %s @ 0x%llx-0x%llx\n",
+                              node->full_name, plat_name,
+                              (unsigned long long)res->start,
+                              (unsigned long long)res->end);
+                       platform_device_register_simple(plat_name, -1, res, 1);
+               }
+       }
+}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/pmi.c powerpc.git/arch/powerpc/sysdev/pmi.c
--- linux-2.6.24/arch/powerpc/sysdev/pmi.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/pmi.c       2008-01-28 20:25:49.000000000 +0100
@@ -28,9 +28,9 @@
 #include <linux/completion.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
 
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
 #include <asm/io.h>
 #include <asm/pmi.h>
 #include <asm/prom.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/ppc4xx_pci.c powerpc.git/arch/powerpc/sysdev/ppc4xx_pci.c
--- linux-2.6.24/arch/powerpc/sysdev/ppc4xx_pci.c       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/ppc4xx_pci.c        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,1528 @@
+/*
+ * PCI / PCI-X / PCI-Express support for 4xx parts
+ *
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * Most PCI Express code is coming from Stefan Roese implementation for
+ * arch/ppc in the Denx tree, slightly reworked by me.
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Some of that comes itself from a previous implementation for 440SPE only
+ * by Roland Dreier:
+ *
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+
+#include "ppc4xx_pci.h"
+
+static int dma_offset_set;
+
+/* Move that to a useable header */
+extern unsigned long total_memory;
+
+#define U64_TO_U32_LOW(val)    ((u32)((val) & 0x00000000ffffffffULL))
+#define U64_TO_U32_HIGH(val)   ((u32)((val) >> 32))
+
+#ifdef CONFIG_RESOURCES_64BIT
+#define RES_TO_U32_LOW(val)    U64_TO_U32_LOW(val)
+#define RES_TO_U32_HIGH(val)   U64_TO_U32_HIGH(val)
+#else
+#define RES_TO_U32_LOW(val)    (val)
+#define RES_TO_U32_HIGH(val)   (0)
+#endif
+
+static inline int ppc440spe_revA(void)
+{
+       /* Catch both 440SPe variants, with and without RAID6 support */
+        if ((mfspr(SPRN_PVR) & 0xffefffff) == 0x53421890)
+                return 1;
+        else
+                return 0;
+}
+
+static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
+{
+       struct pci_controller *hose;
+       int i;
+
+       if (dev->devfn != 0 || dev->bus->self != NULL)
+               return;
+
+       hose = pci_bus_to_host(dev->bus);
+       if (hose == NULL)
+               return;
+
+       if (!of_device_is_compatible(hose->dn, "ibm,plb-pciex") &&
+           !of_device_is_compatible(hose->dn, "ibm,plb-pcix") &&
+           !of_device_is_compatible(hose->dn, "ibm,plb-pci"))
+               return;
+
+       /* Hide the PCI host BARs from the kernel as their content doesn't
+        * fit well in the resource management
+        */
+       for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+               dev->resource[i].start = dev->resource[i].end = 0;
+               dev->resource[i].flags = 0;
+       }
+
+       printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n",
+              pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_ppc4xx_pci_bridge);
+
+static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
+                                         void __iomem *reg,
+                                         struct resource *res)
+{
+       u64 size;
+       const u32 *ranges;
+       int rlen;
+       int pna = of_n_addr_cells(hose->dn);
+       int np = pna + 5;
+
+       /* Default */
+       res->start = 0;
+       res->end = size = 0x80000000;
+       res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+
+       /* Get dma-ranges property */
+       ranges = of_get_property(hose->dn, "dma-ranges", &rlen);
+       if (ranges == NULL)
+               goto out;
+
+       /* Walk it */
+       while ((rlen -= np * 4) >= 0) {
+               u32 pci_space = ranges[0];
+               u64 pci_addr = of_read_number(ranges + 1, 2);
+               u64 cpu_addr = of_translate_dma_address(hose->dn, ranges + 3);
+               size = of_read_number(ranges + pna + 3, 2);
+               ranges += np;
+               if (cpu_addr == OF_BAD_ADDR || size == 0)
+                       continue;
+
+               /* We only care about memory */
+               if ((pci_space & 0x03000000) != 0x02000000)
+                       continue;
+
+               /* We currently only support memory at 0, and pci_addr
+                * within 32 bits space
+                */
+               if (cpu_addr != 0 || pci_addr > 0xffffffff) {
+                       printk(KERN_WARNING "%s: Ignored unsupported dma range"
+                              " 0x%016llx...0x%016llx -> 0x%016llx\n",
+                              hose->dn->full_name,
+                              pci_addr, pci_addr + size - 1, cpu_addr);
+                       continue;
+               }
+
+               /* Check if not prefetchable */
+               if (!(pci_space & 0x40000000))
+                       res->flags &= ~IORESOURCE_PREFETCH;
+
+
+               /* Use that */
+               res->start = pci_addr;
+#ifndef CONFIG_RESOURCES_64BIT
+               /* Beware of 32 bits resources */
+               if ((pci_addr + size) > 0x100000000ull)
+                       res->end = 0xffffffff;
+               else
+#endif
+                       res->end = res->start + size - 1;
+               break;
+       }
+
+       /* We only support one global DMA offset */
+       if (dma_offset_set && pci_dram_offset != res->start) {
+               printk(KERN_ERR "%s: dma-ranges(s) mismatch\n",
+                      hose->dn->full_name);
+               return -ENXIO;
+       }
+
+       /* Check that we can fit all of memory as we don't support
+        * DMA bounce buffers
+        */
+       if (size < total_memory) {
+               printk(KERN_ERR "%s: dma-ranges too small "
+                      "(size=%llx total_memory=%lx)\n",
+                      hose->dn->full_name, size, total_memory);
+               return -ENXIO;
+       }
+
+       /* Check we are a power of 2 size and that base is a multiple of size*/
+       if (!is_power_of_2(size) ||
+           (res->start & (size - 1)) != 0) {
+               printk(KERN_ERR "%s: dma-ranges unaligned\n",
+                      hose->dn->full_name);
+               return -ENXIO;
+       }
+
+       /* Check that we are fully contained within 32 bits space */
+       if (res->end > 0xffffffff) {
+               printk(KERN_ERR "%s: dma-ranges outside of 32 bits space\n",
+                      hose->dn->full_name);
+               return -ENXIO;
+       }
+ out:
+       dma_offset_set = 1;
+       pci_dram_offset = res->start;
+
+       printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
+              pci_dram_offset);
+       return 0;
+}
+
+/*
+ * 4xx PCI 2.x part
+ */
+
+static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
+                                            void __iomem *reg)
+{
+       u32 la, ma, pcila, pciha;
+       int i, j;
+
+       /* Setup outbound memory windows */
+       for (i = j = 0; i < 3; i++) {
+               struct resource *res = &hose->mem_resources[i];
+
+               /* we only care about memory windows */
+               if (!(res->flags & IORESOURCE_MEM))
+                       continue;
+               if (j > 2) {
+                       printk(KERN_WARNING "%s: Too many ranges\n",
+                              hose->dn->full_name);
+                       break;
+               }
+
+               /* Calculate register values */
+               la = res->start;
+               pciha = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+               pcila = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
+
+               ma = res->end + 1 - res->start;
+               if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) {
+                       printk(KERN_WARNING "%s: Resource out of range\n",
+                              hose->dn->full_name);
+                       continue;
+               }
+               ma = (0xffffffffu << ilog2(ma)) | 0x1;
+               if (res->flags & IORESOURCE_PREFETCH)
+                       ma |= 0x2;
+
+               /* Program register values */
+               writel(la, reg + PCIL0_PMM0LA + (0x10 * j));
+               writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * j));
+               writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * j));
+               writel(ma, reg + PCIL0_PMM0MA + (0x10 * j));
+               j++;
+       }
+}
+
+static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose,
+                                            void __iomem *reg,
+                                            const struct resource *res)
+{
+       resource_size_t size = res->end - res->start + 1;
+       u32 sa;
+
+       /* Calculate window size */
+       sa = (0xffffffffu << ilog2(size)) | 1;
+       sa |= 0x1;
+
+       /* RAM is always at 0 local for now */
+       writel(0, reg + PCIL0_PTM1LA);
+       writel(sa, reg + PCIL0_PTM1MS);
+
+       /* Map on PCI side */
+       early_write_config_dword(hose, hose->first_busno, 0,
+                                PCI_BASE_ADDRESS_1, res->start);
+       early_write_config_dword(hose, hose->first_busno, 0,
+                                PCI_BASE_ADDRESS_2, 0x00000000);
+       early_write_config_word(hose, hose->first_busno, 0,
+                               PCI_COMMAND, 0x0006);
+}
+
+static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
+{
+       /* NYI */
+       struct resource rsrc_cfg;
+       struct resource rsrc_reg;
+       struct resource dma_window;
+       struct pci_controller *hose = NULL;
+       void __iomem *reg = NULL;
+       const int *bus_range;
+       int primary = 0;
+
+       /* Fetch config space registers address */
+       if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+               printk(KERN_ERR "%s:Can't get PCI config register base !",
+                      np->full_name);
+               return;
+       }
+       /* Fetch host bridge internal registers address */
+       if (of_address_to_resource(np, 3, &rsrc_reg)) {
+               printk(KERN_ERR "%s: Can't get PCI internal register base !",
+                      np->full_name);
+               return;
+       }
+
+       /* Check if primary bridge */
+       if (of_get_property(np, "primary", NULL))
+               primary = 1;
+
+       /* Get bus range if any */
+       bus_range = of_get_property(np, "bus-range", NULL);
+
+       /* Map registers */
+       reg = ioremap(rsrc_reg.start, rsrc_reg.end + 1 - rsrc_reg.start);
+       if (reg == NULL) {
+               printk(KERN_ERR "%s: Can't map registers !", np->full_name);
+               goto fail;
+       }
+
+       /* Allocate the host controller data structure */
+       hose = pcibios_alloc_controller(np);
+       if (!hose)
+               goto fail;
+
+       hose->first_busno = bus_range ? bus_range[0] : 0x0;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+       /* Setup config space */
+       setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+
+       /* Disable all windows */
+       writel(0, reg + PCIL0_PMM0MA);
+       writel(0, reg + PCIL0_PMM1MA);
+       writel(0, reg + PCIL0_PMM2MA);
+       writel(0, reg + PCIL0_PTM1MS);
+       writel(0, reg + PCIL0_PTM2MS);
+
+       /* Parse outbound mapping resources */
+       pci_process_bridge_OF_ranges(hose, np, primary);
+
+       /* Parse inbound mapping resources */
+       if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0)
+               goto fail;
+
+       /* Configure outbound ranges POMs */
+       ppc4xx_configure_pci_PMMs(hose, reg);
+
+       /* Configure inbound ranges PIMs */
+       ppc4xx_configure_pci_PTMs(hose, reg, &dma_window);
+
+       /* We don't need the registers anymore */
+       iounmap(reg);
+       return;
+
+ fail:
+       if (hose)
+               pcibios_free_controller(hose);
+       if (reg)
+               iounmap(reg);
+}
+
+/*
+ * 4xx PCI-X part
+ */
+
+static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
+                                             void __iomem *reg)
+{
+       u32 lah, lal, pciah, pcial, sa;
+       int i, j;
+
+       /* Setup outbound memory windows */
+       for (i = j = 0; i < 3; i++) {
+               struct resource *res = &hose->mem_resources[i];
+
+               /* we only care about memory windows */
+               if (!(res->flags & IORESOURCE_MEM))
+                       continue;
+               if (j > 1) {
+                       printk(KERN_WARNING "%s: Too many ranges\n",
+                              hose->dn->full_name);
+                       break;
+               }
+
+               /* Calculate register values */
+               lah = RES_TO_U32_HIGH(res->start);
+               lal = RES_TO_U32_LOW(res->start);
+               pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+               pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
+               sa = res->end + 1 - res->start;
+               if (!is_power_of_2(sa) || sa < 0x100000 ||
+                   sa > 0xffffffffu) {
+                       printk(KERN_WARNING "%s: Resource out of range\n",
+                              hose->dn->full_name);
+                       continue;
+               }
+               sa = (0xffffffffu << ilog2(sa)) | 0x1;
+
+               /* Program register values */
+               if (j == 0) {
+                       writel(lah, reg + PCIX0_POM0LAH);
+                       writel(lal, reg + PCIX0_POM0LAL);
+                       writel(pciah, reg + PCIX0_POM0PCIAH);
+                       writel(pcial, reg + PCIX0_POM0PCIAL);
+                       writel(sa, reg + PCIX0_POM0SA);
+               } else {
+                       writel(lah, reg + PCIX0_POM1LAH);
+                       writel(lal, reg + PCIX0_POM1LAL);
+                       writel(pciah, reg + PCIX0_POM1PCIAH);
+                       writel(pcial, reg + PCIX0_POM1PCIAL);
+                       writel(sa, reg + PCIX0_POM1SA);
+               }
+               j++;
+       }
+}
+
+static void __init ppc4xx_configure_pcix_PIMs(struct pci_controller *hose,
+                                             void __iomem *reg,
+                                             const struct resource *res,
+                                             int big_pim,
+                                             int enable_msi_hole)
+{
+       resource_size_t size = res->end - res->start + 1;
+       u32 sa;
+
+       /* RAM is always at 0 */
+       writel(0x00000000, reg + PCIX0_PIM0LAH);
+       writel(0x00000000, reg + PCIX0_PIM0LAL);
+
+       /* Calculate window size */
+       sa = (0xffffffffu << ilog2(size)) | 1;
+       sa |= 0x1;
+       if (res->flags & IORESOURCE_PREFETCH)
+               sa |= 0x2;
+       if (enable_msi_hole)
+               sa |= 0x4;
+       writel(sa, reg + PCIX0_PIM0SA);
+       if (big_pim)
+               writel(0xffffffff, reg + PCIX0_PIM0SAH);
+
+       /* Map on PCI side */
+       writel(0x00000000, reg + PCIX0_BAR0H);
+       writel(res->start, reg + PCIX0_BAR0L);
+       writew(0x0006, reg + PCIX0_COMMAND);
+}
+
+static void __init ppc4xx_probe_pcix_bridge(struct device_node *np)
+{
+       struct resource rsrc_cfg;
+       struct resource rsrc_reg;
+       struct resource dma_window;
+       struct pci_controller *hose = NULL;
+       void __iomem *reg = NULL;
+       const int *bus_range;
+       int big_pim = 0, msi = 0, primary = 0;
+
+       /* Fetch config space registers address */
+       if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+               printk(KERN_ERR "%s:Can't get PCI-X config register base !",
+                      np->full_name);
+               return;
+       }
+       /* Fetch host bridge internal registers address */
+       if (of_address_to_resource(np, 3, &rsrc_reg)) {
+               printk(KERN_ERR "%s: Can't get PCI-X internal register base !",
+                      np->full_name);
+               return;
+       }
+
+       /* Check if it supports large PIMs (440GX) */
+       if (of_get_property(np, "large-inbound-windows", NULL))
+               big_pim = 1;
+
+       /* Check if we should enable MSIs inbound hole */
+       if (of_get_property(np, "enable-msi-hole", NULL))
+               msi = 1;
+
+       /* Check if primary bridge */
+       if (of_get_property(np, "primary", NULL))
+               primary = 1;
+
+       /* Get bus range if any */
+       bus_range = of_get_property(np, "bus-range", NULL);
+
+       /* Map registers */
+       reg = ioremap(rsrc_reg.start, rsrc_reg.end + 1 - rsrc_reg.start);
+       if (reg == NULL) {
+               printk(KERN_ERR "%s: Can't map registers !", np->full_name);
+               goto fail;
+       }
+
+       /* Allocate the host controller data structure */
+       hose = pcibios_alloc_controller(np);
+       if (!hose)
+               goto fail;
+
+       hose->first_busno = bus_range ? bus_range[0] : 0x0;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+       /* Setup config space */
+       setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+
+       /* Disable all windows */
+       writel(0, reg + PCIX0_POM0SA);
+       writel(0, reg + PCIX0_POM1SA);
+       writel(0, reg + PCIX0_POM2SA);
+       writel(0, reg + PCIX0_PIM0SA);
+       writel(0, reg + PCIX0_PIM1SA);
+       writel(0, reg + PCIX0_PIM2SA);
+       if (big_pim) {
+               writel(0, reg + PCIX0_PIM0SAH);
+               writel(0, reg + PCIX0_PIM2SAH);
+       }
+
+       /* Parse outbound mapping resources */
+       pci_process_bridge_OF_ranges(hose, np, primary);
+
+       /* Parse inbound mapping resources */
+       if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0)
+               goto fail;
+
+       /* Configure outbound ranges POMs */
+       ppc4xx_configure_pcix_POMs(hose, reg);
+
+       /* Configure inbound ranges PIMs */
+       ppc4xx_configure_pcix_PIMs(hose, reg, &dma_window, big_pim, msi);
+
+       /* We don't need the registers anymore */
+       iounmap(reg);
+       return;
+
+ fail:
+       if (hose)
+               pcibios_free_controller(hose);
+       if (reg)
+               iounmap(reg);
+}
+
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+
+/*
+ * 4xx PCI-Express part
+ *
+ * We support 3 parts currently based on the compatible property:
+ *
+ * ibm,plb-pciex-440spe
+ * ibm,plb-pciex-405ex
+ *
+ * Anything else will be rejected for now as they are all subtly
+ * different unfortunately.
+ *
+ */
+
+#define MAX_PCIE_BUS_MAPPED    0x40
+
+struct ppc4xx_pciex_port
+{
+       struct pci_controller   *hose;
+       struct device_node      *node;
+       unsigned int            index;
+       int                     endpoint;
+       int                     link;
+       int                     has_ibpre;
+       unsigned int            sdr_base;
+       dcr_host_t              dcrs;
+       struct resource         cfg_space;
+       struct resource         utl_regs;
+       void __iomem            *utl_base;
+};
+
+static struct ppc4xx_pciex_port *ppc4xx_pciex_ports;
+static unsigned int ppc4xx_pciex_port_count;
+
+struct ppc4xx_pciex_hwops
+{
+       int (*core_init)(struct device_node *np);
+       int (*port_init_hw)(struct ppc4xx_pciex_port *port);
+       int (*setup_utl)(struct ppc4xx_pciex_port *port);
+};
+
+static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops;
+
+#ifdef CONFIG_44x
+
+/* Check various reset bits of the 440SPe PCIe core */
+static int __init ppc440spe_pciex_check_reset(struct device_node *np)
+{
+       u32 valPE0, valPE1, valPE2;
+       int err = 0;
+
+       /* SDR0_PEGPLLLCT1 reset */
+       if (!(mfdcri(SDR0, PESDR0_PLLLCT1) & 0x01000000)) {
+               /*
+                * the PCIe core was probably already initialised
+                * by firmware - let's re-reset RCSSET regs
+                *
+                * -- Shouldn't we also re-reset the whole thing ? -- BenH
+                */
+               pr_debug("PCIE: SDR0_PLLLCT1 already reset.\n");
+               mtdcri(SDR0, PESDR0_440SPE_RCSSET, 0x01010000);
+               mtdcri(SDR0, PESDR1_440SPE_RCSSET, 0x01010000);
+               mtdcri(SDR0, PESDR2_440SPE_RCSSET, 0x01010000);
+       }
+
+       valPE0 = mfdcri(SDR0, PESDR0_440SPE_RCSSET);
+       valPE1 = mfdcri(SDR0, PESDR1_440SPE_RCSSET);
+       valPE2 = mfdcri(SDR0, PESDR2_440SPE_RCSSET);
+
+       /* SDR0_PExRCSSET rstgu */
+       if (!(valPE0 & 0x01000000) ||
+           !(valPE1 & 0x01000000) ||
+           !(valPE2 & 0x01000000)) {
+               printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
+               err = -1;
+       }
+
+       /* SDR0_PExRCSSET rstdl */
+       if (!(valPE0 & 0x00010000) ||
+           !(valPE1 & 0x00010000) ||
+           !(valPE2 & 0x00010000)) {
+               printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
+               err = -1;
+       }
+
+       /* SDR0_PExRCSSET rstpyn */
+       if ((valPE0 & 0x00001000) ||
+           (valPE1 & 0x00001000) ||
+           (valPE2 & 0x00001000)) {
+               printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
+               err = -1;
+       }
+
+       /* SDR0_PExRCSSET hldplb */
+       if ((valPE0 & 0x10000000) ||
+           (valPE1 & 0x10000000) ||
+           (valPE2 & 0x10000000)) {
+               printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
+               err = -1;
+       }
+
+       /* SDR0_PExRCSSET rdy */
+       if ((valPE0 & 0x00100000) ||
+           (valPE1 & 0x00100000) ||
+           (valPE2 & 0x00100000)) {
+               printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
+               err = -1;
+       }
+
+       /* SDR0_PExRCSSET shutdown */
+       if ((valPE0 & 0x00000100) ||
+           (valPE1 & 0x00000100) ||
+           (valPE2 & 0x00000100)) {
+               printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
+               err = -1;
+       }
+
+       return err;
+}
+
+/* Global PCIe core initializations for 440SPe core */
+static int __init ppc440spe_pciex_core_init(struct device_node *np)
+{
+       int time_out = 20;
+
+       /* Set PLL clock receiver to LVPECL */
+       mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+
+       /* Shouldn't we do all the calibration stuff etc... here ? */
+       if (ppc440spe_pciex_check_reset(np))
+               return -ENXIO;
+
+       if (!(mfdcri(SDR0, PESDR0_PLLLCT2) & 0x10000)) {
+               printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration "
+                      "failed (0x%08x)\n",
+                      mfdcri(SDR0, PESDR0_PLLLCT2));
+               return -1;
+       }
+
+       /* De-assert reset of PCIe PLL, wait for lock */
+       mtdcri(SDR0, PESDR0_PLLLCT1,
+              mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+       udelay(3);
+
+       while (time_out) {
+               if (!(mfdcri(SDR0, PESDR0_PLLLCT3) & 0x10000000)) {
+                       time_out--;
+                       udelay(1);
+               } else
+                       break;
+       }
+       if (!time_out) {
+               printk(KERN_INFO "PCIE: VCO output not locked\n");
+               return -1;
+       }
+
+       pr_debug("PCIE initialization OK\n");
+
+       return 3;
+}
+
+static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+       u32 val = 1 << 24;
+
+       if (port->endpoint)
+               val = PTYPE_LEGACY_ENDPOINT << 20;
+       else
+               val = PTYPE_ROOT_PORT << 20;
+
+       if (port->index == 0)
+               val |= LNKW_X8 << 12;
+       else
+               val |= LNKW_X4 << 12;
+
+       mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+       mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222);
+       if (ppc440spe_revA())
+               mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000);
+       mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000);
+       mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000);
+       mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL2SET1, 0x35000000);
+       mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL3SET1, 0x35000000);
+       if (port->index == 0) {
+               mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL4SET1,
+                      0x35000000);
+               mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL5SET1,
+                      0x35000000);
+               mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL6SET1,
+                      0x35000000);
+               mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
+                      0x35000000);
+       }
+       val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
+       mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+              (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+
+       return 0;
+}
+
+static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+       return ppc440spe_pciex_init_port_hw(port);
+}
+
+static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+       int rc = ppc440spe_pciex_init_port_hw(port);
+
+       port->has_ibpre = 1;
+
+       return rc;
+}
+
+static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+       /* XXX Check what that value means... I hate magic */
+       dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800);
+
+       /*
+        * Set buffer allocations and then assert VRB and TXE.
+        */
+       out_be32(port->utl_base + PEUTL_OUTTR,   0x08000000);
+       out_be32(port->utl_base + PEUTL_INTR,    0x02000000);
+       out_be32(port->utl_base + PEUTL_OPDBSZ,  0x10000000);
+       out_be32(port->utl_base + PEUTL_PBBSZ,   0x53000000);
+       out_be32(port->utl_base + PEUTL_IPHBSZ,  0x08000000);
+       out_be32(port->utl_base + PEUTL_IPDBSZ,  0x10000000);
+       out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+       out_be32(port->utl_base + PEUTL_PCTL,    0x80800066);
+
+       return 0;
+}
+
+static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+       /* Report CRS to the operating system */
+       out_be32(port->utl_base + PEUTL_PBCTL,    0x08000000);
+
+       return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
+{
+       .core_init      = ppc440spe_pciex_core_init,
+       .port_init_hw   = ppc440speA_pciex_init_port_hw,
+       .setup_utl      = ppc440speA_pciex_init_utl,
+};
+
+static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
+{
+       .core_init      = ppc440spe_pciex_core_init,
+       .port_init_hw   = ppc440speB_pciex_init_port_hw,
+       .setup_utl      = ppc440speB_pciex_init_utl,
+};
+
+#endif /* CONFIG_44x */
+
+#ifdef CONFIG_40x
+
+static int __init ppc405ex_pciex_core_init(struct device_node *np)
+{
+       /* Nothing to do, return 2 ports */
+       return 2;
+}
+
+static void ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port)
+{
+       /* Assert the PE0_PHY reset */
+       mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000);
+       msleep(1);
+
+       /* deassert the PE0_hotreset */
+       if (port->endpoint)
+               mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000);
+       else
+               mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000);
+
+       /* poll for phy !reset */
+       /* XXX FIXME add timeout */
+       while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000))
+               ;
+
+       /* deassert the PE0_gpl_utl_reset */
+       mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
+}
+
+static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+       u32 val;
+
+       if (port->endpoint)
+               val = PTYPE_LEGACY_ENDPOINT;
+       else
+               val = PTYPE_ROOT_PORT;
+
+       mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET,
+              1 << 24 | val << 20 | LNKW_X1 << 12);
+
+       mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+       mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+       mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000);
+       mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003);
+
+       /*
+        * Only reset the PHY when no link is currently established.
+        * This is for the Atheros PCIe board which has problems to establish
+        * the link (again) after this PHY reset. All other currently tested
+        * PCIe boards don't show this problem.
+        * This has to be re-tested and fixed in a later release!
+        */
+#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
+       * configured as done previously by U-Boot. Then Linux will currently
+       * not reassign them. So the PHY reset is now done always. This will
+       * lead to problems with the Atheros PCIe board again.
+       */
+       val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+       if (!(val & 0x00001000))
+               ppc405ex_pcie_phy_reset(port);
+#else
+       ppc405ex_pcie_phy_reset(port);
+#endif
+
+       dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000);  /* guarded on */
+
+       port->has_ibpre = 1;
+
+       return 0;
+}
+
+static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+       dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+       /*
+        * Set buffer allocations and then assert VRB and TXE.
+        */
+       out_be32(port->utl_base + PEUTL_OUTTR,   0x02000000);
+       out_be32(port->utl_base + PEUTL_INTR,    0x02000000);
+       out_be32(port->utl_base + PEUTL_OPDBSZ,  0x04000000);
+       out_be32(port->utl_base + PEUTL_PBBSZ,   0x21000000);
+       out_be32(port->utl_base + PEUTL_IPHBSZ,  0x02000000);
+       out_be32(port->utl_base + PEUTL_IPDBSZ,  0x04000000);
+       out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+       out_be32(port->utl_base + PEUTL_PCTL,    0x80800066);
+
+       out_be32(port->utl_base + PEUTL_PBCTL,   0x08000000);
+
+       return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
+{
+       .core_init      = ppc405ex_pciex_core_init,
+       .port_init_hw   = ppc405ex_pciex_init_port_hw,
+       .setup_utl      = ppc405ex_pciex_init_utl,
+};
+
+#endif /* CONFIG_40x */
+
+
+/* Check that the core has been initied and if not, do it */
+static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
+{
+       static int core_init;
+       int count = -ENODEV;
+
+       if (core_init++)
+               return 0;
+
+#ifdef CONFIG_44x
+       if (of_device_is_compatible(np, "ibm,plb-pciex-440spe")) {
+               if (ppc440spe_revA())
+                       ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
+               else
+                       ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+       }
+#endif /* CONFIG_44x    */
+#ifdef CONFIG_40x
+       if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
+               ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
+#endif
+       if (ppc4xx_pciex_hwops == NULL) {
+               printk(KERN_WARNING "PCIE: unknown host type %s\n",
+                      np->full_name);
+               return -ENODEV;
+       }
+
+       count = ppc4xx_pciex_hwops->core_init(np);
+       if (count > 0) {
+               ppc4xx_pciex_ports =
+                      kzalloc(count * sizeof(struct ppc4xx_pciex_port),
+                              GFP_KERNEL);
+               if (ppc4xx_pciex_ports) {
+                       ppc4xx_pciex_port_count = count;
+                       return 0;
+               }
+               printk(KERN_WARNING "PCIE: failed to allocate ports array\n");
+               return -ENOMEM;
+       }
+       return -ENODEV;
+}
+
+static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port)
+{
+       /* We map PCI Express configuration based on the reg property */
+       dcr_write(port->dcrs, DCRO_PEGPL_CFGBAH,
+                 RES_TO_U32_HIGH(port->cfg_space.start));
+       dcr_write(port->dcrs, DCRO_PEGPL_CFGBAL,
+                 RES_TO_U32_LOW(port->cfg_space.start));
+
+       /* XXX FIXME: Use size from reg property. For now, map 512M */
+       dcr_write(port->dcrs, DCRO_PEGPL_CFGMSK, 0xe0000001);
+
+       /* We map UTL registers based on the reg property */
+       dcr_write(port->dcrs, DCRO_PEGPL_REGBAH,
+                 RES_TO_U32_HIGH(port->utl_regs.start));
+       dcr_write(port->dcrs, DCRO_PEGPL_REGBAL,
+                 RES_TO_U32_LOW(port->utl_regs.start));
+
+       /* XXX FIXME: Use size from reg property */
+       dcr_write(port->dcrs, DCRO_PEGPL_REGMSK, 0x00007001);
+
+       /* Disable all other outbound windows */
+       dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, 0);
+       dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, 0);
+       dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0);
+       dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0);
+}
+
+static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port,
+                                          unsigned int sdr_offset,
+                                          unsigned int mask,
+                                          unsigned int value,
+                                          int timeout_ms)
+{
+       u32 val;
+
+       while(timeout_ms--) {
+               val = mfdcri(SDR0, port->sdr_base + sdr_offset);
+               if ((val & mask) == value) {
+                       pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n",
+                                port->index, sdr_offset, timeout_ms, val);
+                       return 0;
+               }
+               msleep(1);
+       }
+       return -1;
+}
+
+static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
+{
+       int rc = 0;
+
+       /* Init HW */
+       if (ppc4xx_pciex_hwops->port_init_hw)
+               rc = ppc4xx_pciex_hwops->port_init_hw(port);
+       if (rc != 0)
+               return rc;
+
+       printk(KERN_INFO "PCIE%d: Checking link...\n",
+              port->index);
+
+       /* Wait for reset to complete */
+       if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) {
+               printk(KERN_WARNING "PCIE%d: PGRST failed\n",
+                      port->index);
+               return -1;
+       }
+
+       /* Check for card presence detect if supported, if not, just wait for
+        * link unconditionally.
+        *
+        * note that we don't fail if there is no link, we just filter out
+        * config space accesses. That way, it will be easier to implement
+        * hotplug later on.
+        */
+       if (!port->has_ibpre ||
+           !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+                                     1 << 28, 1 << 28, 100)) {
+               printk(KERN_INFO
+                      "PCIE%d: Device detected, waiting for link...\n",
+                      port->index);
+               if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+                                            0x1000, 0x1000, 2000))
+                       printk(KERN_WARNING
+                              "PCIE%d: Link up failed\n", port->index);
+               else {
+                       printk(KERN_INFO
+                              "PCIE%d: link is up !\n", port->index);
+                       port->link = 1;
+               }
+       } else
+               printk(KERN_INFO "PCIE%d: No device detected.\n", port->index);
+
+       /*
+        * Initialize mapping: disable all regions and configure
+        * CFG and REG regions based on resources in the device tree
+        */
+       ppc4xx_pciex_port_init_mapping(port);
+
+       /*
+        * Map UTL
+        */
+       port->utl_base = ioremap(port->utl_regs.start, 0x100);
+       BUG_ON(port->utl_base == NULL);
+
+       /*
+        * Setup UTL registers --BenH.
+        */
+       if (ppc4xx_pciex_hwops->setup_utl)
+               ppc4xx_pciex_hwops->setup_utl(port);
+
+       /*
+        * Check for VC0 active and assert RDY.
+        */
+       if (port->link &&
+           ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+                                    1 << 16, 1 << 16, 5000)) {
+               printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
+               port->link = 0;
+       }
+
+       mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+              mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+       msleep(100);
+
+       return 0;
+}
+
+static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port,
+                                    struct pci_bus *bus,
+                                    unsigned int devfn)
+{
+       static int message;
+
+       /* Endpoint can not generate upstream(remote) config cycles */
+       if (port->endpoint && bus->number != port->hose->first_busno)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       /* Check we are within the mapped range */
+       if (bus->number > port->hose->last_busno) {
+               if (!message) {
+                       printk(KERN_WARNING "Warning! Probing bus %u"
+                              " out of range !\n", bus->number);
+                       message++;
+               }
+               return PCIBIOS_DEVICE_NOT_FOUND;
+       }
+
+       /* The root complex has only one device / function */
+       if (bus->number == port->hose->first_busno && devfn != 0)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       /* The other side of the RC has only one device as well */
+       if (bus->number == (port->hose->first_busno + 1) &&
+           PCI_SLOT(devfn) != 0)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       /* Check if we have a link */
+       if ((bus->number != port->hose->first_busno) && !port->link)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       return 0;
+}
+
+static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port,
+                                                 struct pci_bus *bus,
+                                                 unsigned int devfn)
+{
+       int relbus;
+
+       /* Remove the casts when we finally remove the stupid volatile
+        * in struct pci_controller
+        */
+       if (bus->number == port->hose->first_busno)
+               return (void __iomem *)port->hose->cfg_addr;
+
+       relbus = bus->number - (port->hose->first_busno + 1);
+       return (void __iomem *)port->hose->cfg_data +
+               ((relbus  << 20) | (devfn << 12));
+}
+
+static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
+                                   int offset, int len, u32 *val)
+{
+       struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+       struct ppc4xx_pciex_port *port =
+               &ppc4xx_pciex_ports[hose->indirect_type];
+       void __iomem *addr;
+       u32 gpl_cfg;
+
+       BUG_ON(hose != port->hose);
+
+       if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+       /*
+        * Reading from configuration space of non-existing device can
+        * generate transaction errors. For the read duration we suppress
+        * assertion of machine check exceptions to avoid those.
+        */
+       gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+       dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+       /* Make sure no CRS is recorded */
+       out_be32(port->utl_base + PEUTL_RCSTA, 0x00040000);
+
+       switch (len) {
+       case 1:
+               *val = in_8((u8 *)(addr + offset));
+               break;
+       case 2:
+               *val = in_le16((u16 *)(addr + offset));
+               break;
+       default:
+               *val = in_le32((u32 *)(addr + offset));
+               break;
+       }
+
+       pr_debug("pcie-config-read: bus=%3d [%3d..%3d] devfn=0x%04x"
+                " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+                bus->number, hose->first_busno, hose->last_busno,
+                devfn, offset, len, addr + offset, *val);
+
+       /* Check for CRS (440SPe rev B does that for us but heh ..) */
+       if (in_be32(port->utl_base + PEUTL_RCSTA) & 0x00040000) {
+               pr_debug("Got CRS !\n");
+               if (len != 4 || offset != 0)
+                       return PCIBIOS_DEVICE_NOT_FOUND;
+               *val = 0xffff0001;
+       }
+
+       dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
+                                    int offset, int len, u32 val)
+{
+       struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+       struct ppc4xx_pciex_port *port =
+               &ppc4xx_pciex_ports[hose->indirect_type];
+       void __iomem *addr;
+       u32 gpl_cfg;
+
+       if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+       /*
+        * Reading from configuration space of non-existing device can
+        * generate transaction errors. For the read duration we suppress
+        * assertion of machine check exceptions to avoid those.
+        */
+       gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+       dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+       pr_debug("pcie-config-write: bus=%3d [%3d..%3d] devfn=0x%04x"
+                " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+                bus->number, hose->first_busno, hose->last_busno,
+                devfn, offset, len, addr + offset, val);
+
+       switch (len) {
+       case 1:
+               out_8((u8 *)(addr + offset), val);
+               break;
+       case 2:
+               out_le16((u16 *)(addr + offset), val);
+               break;
+       default:
+               out_le32((u32 *)(addr + offset), val);
+               break;
+       }
+
+       dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ppc4xx_pciex_pci_ops =
+{
+       .read  = ppc4xx_pciex_read_config,
+       .write = ppc4xx_pciex_write_config,
+};
+
+static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
+                                              struct pci_controller *hose,
+                                              void __iomem *mbase)
+{
+       u32 lah, lal, pciah, pcial, sa;
+       int i, j;
+
+       /* Setup outbound memory windows */
+       for (i = j = 0; i < 3; i++) {
+               struct resource *res = &hose->mem_resources[i];
+
+               /* we only care about memory windows */
+               if (!(res->flags & IORESOURCE_MEM))
+                       continue;
+               if (j > 1) {
+                       printk(KERN_WARNING "%s: Too many ranges\n",
+                              port->node->full_name);
+                       break;
+               }
+
+               /* Calculate register values */
+               lah = RES_TO_U32_HIGH(res->start);
+               lal = RES_TO_U32_LOW(res->start);
+               pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+               pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
+               sa = res->end + 1 - res->start;
+               if (!is_power_of_2(sa) || sa < 0x100000 ||
+                   sa > 0xffffffffu) {
+                       printk(KERN_WARNING "%s: Resource out of range\n",
+                              port->node->full_name);
+                       continue;
+               }
+               sa = (0xffffffffu << ilog2(sa)) | 0x1;
+
+               /* Program register values */
+               switch (j) {
+               case 0:
+                       out_le32(mbase + PECFG_POM0LAH, pciah);
+                       out_le32(mbase + PECFG_POM0LAL, pcial);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+                       break;
+               case 1:
+                       out_le32(mbase + PECFG_POM1LAH, pciah);
+                       out_le32(mbase + PECFG_POM1LAL, pcial);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
+                       dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+                       break;
+               }
+               j++;
+       }
+
+       /* Configure IO, always 64K starting at 0 */
+       if (hose->io_resource.flags & IORESOURCE_IO) {
+               lah = RES_TO_U32_HIGH(hose->io_base_phys);
+               lal = RES_TO_U32_LOW(hose->io_base_phys);
+               out_le32(mbase + PECFG_POM2LAH, 0);
+               out_le32(mbase + PECFG_POM2LAL, 0);
+               dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
+               dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
+               dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
+               dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0xffff0000 | 3);
+       }
+}
+
+static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
+                                              struct pci_controller *hose,
+                                              void __iomem *mbase,
+                                              struct resource *res)
+{
+       resource_size_t size = res->end - res->start + 1;
+       u64 sa;
+
+       /* Calculate window size */
+       sa = (0xffffffffffffffffull << ilog2(size));;
+       if (res->flags & IORESOURCE_PREFETCH)
+               sa |= 0x8;
+
+       out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+       out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+       /* The setup of the split looks weird to me ... let's see if it works */
+       out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+       out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+       out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+       out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+       out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+       out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+       /* Enable inbound mapping */
+       out_le32(mbase + PECFG_PIMEN, 0x1);
+
+       out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+       out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+
+       /* Enable I/O, Mem, and Busmaster cycles */
+       out_le16(mbase + PCI_COMMAND,
+                in_le16(mbase + PCI_COMMAND) |
+                PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+
+static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
+{
+       struct resource dma_window;
+       struct pci_controller *hose = NULL;
+       const int *bus_range;
+       int primary = 0, busses;
+       void __iomem *mbase = NULL, *cfg_data = NULL;
+
+       /* XXX FIXME: Handle endpoint mode properly */
+       if (port->endpoint) {
+               printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n",
+                      port->index);
+               return;
+       }
+
+       /* Check if primary bridge */
+       if (of_get_property(port->node, "primary", NULL))
+               primary = 1;
+
+       /* Get bus range if any */
+       bus_range = of_get_property(port->node, "bus-range", NULL);
+
+       /* Allocate the host controller data structure */
+       hose = pcibios_alloc_controller(port->node);
+       if (!hose)
+               goto fail;
+
+       /* We stick the port number in "indirect_type" so the config space
+        * ops can retrieve the port data structure easily
+        */
+       hose->indirect_type = port->index;
+
+       /* Get bus range */
+       hose->first_busno = bus_range ? bus_range[0] : 0x0;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+       /* Because of how big mapping the config space is (1M per bus), we
+        * limit how many busses we support. In the long run, we could replace
+        * that with something akin to kmap_atomic instead. We set aside 1 bus
+        * for the host itself too.
+        */
+       busses = hose->last_busno - hose->first_busno; /* This is off by 1 */
+       if (busses > MAX_PCIE_BUS_MAPPED) {
+               busses = MAX_PCIE_BUS_MAPPED;
+               hose->last_busno = hose->first_busno + busses;
+       }
+
+       /* We map the external config space in cfg_data and the host config
+        * space in cfg_addr. External space is 1M per bus, internal space
+        * is 4K
+        */
+       cfg_data = ioremap(port->cfg_space.start +
+                                (hose->first_busno + 1) * 0x100000,
+                                busses * 0x100000);
+       mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+       if (cfg_data == NULL || mbase == NULL) {
+               printk(KERN_ERR "%s: Can't map config space !",
+                      port->node->full_name);
+               goto fail;
+       }
+
+       hose->cfg_data = cfg_data;
+       hose->cfg_addr = mbase;
+
+       pr_debug("PCIE %s, bus %d..%d\n", port->node->full_name,
+                hose->first_busno, hose->last_busno);
+       pr_debug("     config space mapped at: root @0x%p, other @0x%p\n",
+                hose->cfg_addr, hose->cfg_data);
+
+       /* Setup config space */
+       hose->ops = &ppc4xx_pciex_pci_ops;
+       port->hose = hose;
+       mbase = (void __iomem *)hose->cfg_addr;
+
+       /*
+        * Set bus numbers on our root port
+        */
+       out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+       out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+       out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+
+       /*
+        * OMRs are already reset, also disable PIMs
+        */
+       out_le32(mbase + PECFG_PIMEN, 0);
+
+       /* Parse outbound mapping resources */
+       pci_process_bridge_OF_ranges(hose, port->node, primary);
+
+       /* Parse inbound mapping resources */
+       if (ppc4xx_parse_dma_ranges(hose, mbase, &dma_window) != 0)
+               goto fail;
+
+       /* Configure outbound ranges POMs */
+       ppc4xx_configure_pciex_POMs(port, hose, mbase);
+
+       /* Configure inbound ranges PIMs */
+       ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
+
+       /* The root complex doesn't show up if we don't set some vendor
+        * and device IDs into it. Those are the same bogus one that the
+        * initial code in arch/ppc add. We might want to change that.
+        */
+       out_le16(mbase + 0x200, 0xaaa0 + port->index);
+       out_le16(mbase + 0x202, 0xbed0 + port->index);
+
+       /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+       out_le32(mbase + 0x208, 0x06040001);
+
+       printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+              port->index);
+       return;
+ fail:
+       if (hose)
+               pcibios_free_controller(hose);
+       if (cfg_data)
+               iounmap(cfg_data);
+       if (mbase)
+               iounmap(mbase);
+}
+
+static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
+{
+       struct ppc4xx_pciex_port *port;
+       const u32 *pval;
+       int portno;
+       unsigned int dcrs;
+
+       /* First, proceed to core initialization as we assume there's
+        * only one PCIe core in the system
+        */
+       if (ppc4xx_pciex_check_core_init(np))
+               return;
+
+       /* Get the port number from the device-tree */
+       pval = of_get_property(np, "port", NULL);
+       if (pval == NULL) {
+               printk(KERN_ERR "PCIE: Can't find port number for %s\n",
+                      np->full_name);
+               return;
+       }
+       portno = *pval;
+       if (portno >= ppc4xx_pciex_port_count) {
+               printk(KERN_ERR "PCIE: port number out of range for %s\n",
+                      np->full_name);
+               return;
+       }
+       port = &ppc4xx_pciex_ports[portno];
+       port->index = portno;
+       port->node = of_node_get(np);
+       pval = of_get_property(np, "sdr-base", NULL);
+       if (pval == NULL) {
+               printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
+                      np->full_name);
+               return;
+       }
+       port->sdr_base = *pval;
+
+       /* XXX Currently, we only support root complex mode */
+       port->endpoint = 0;
+
+       /* Fetch config space registers address */
+       if (of_address_to_resource(np, 0, &port->cfg_space)) {
+               printk(KERN_ERR "%s: Can't get PCI-E config space !",
+                      np->full_name);
+               return;
+       }
+       /* Fetch host bridge internal registers address */
+       if (of_address_to_resource(np, 1, &port->utl_regs)) {
+               printk(KERN_ERR "%s: Can't get UTL register base !",
+                      np->full_name);
+               return;
+       }
+
+       /* Map DCRs */
+       dcrs = dcr_resource_start(np, 0);
+       if (dcrs == 0) {
+               printk(KERN_ERR "%s: Can't get DCR register base !",
+                      np->full_name);
+               return;
+       }
+       port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+
+       /* Initialize the port specific registers */
+       if (ppc4xx_pciex_port_init(port)) {
+               printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index);
+               return;
+       }
+
+       /* Setup the linux hose data structure */
+       ppc4xx_pciex_port_setup_hose(port);
+}
+
+#endif /* CONFIG_PPC4xx_PCI_EXPRESS */
+
+static int __init ppc4xx_pci_find_bridges(void)
+{
+       struct device_node *np;
+
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+       for_each_compatible_node(np, NULL, "ibm,plb-pciex")
+               ppc4xx_probe_pciex_bridge(np);
+#endif
+       for_each_compatible_node(np, NULL, "ibm,plb-pcix")
+               ppc4xx_probe_pcix_bridge(np);
+       for_each_compatible_node(np, NULL, "ibm,plb-pci")
+               ppc4xx_probe_pci_bridge(np);
+
+       return 0;
+}
+arch_initcall(ppc4xx_pci_find_bridges);
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/ppc4xx_pci.h powerpc.git/arch/powerpc/sysdev/ppc4xx_pci.h
--- linux-2.6.24/arch/powerpc/sysdev/ppc4xx_pci.h       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/ppc4xx_pci.h        2008-01-28 20:25:49.000000000 +0100
@@ -0,0 +1,369 @@
+/*
+ * PCI / PCI-X / PCI-Express support for 4xx parts
+ *
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * Bits and pieces extracted from arch/ppc support by
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2002-2005 MontaVista Software Inc.
+ */
+#ifndef __PPC4XX_PCI_H__
+#define __PPC4XX_PCI_H__
+
+/*
+ * 4xx PCI-X bridge register definitions
+ */
+#define PCIX0_VENDID           0x000
+#define PCIX0_DEVID            0x002
+#define PCIX0_COMMAND          0x004
+#define PCIX0_STATUS           0x006
+#define PCIX0_REVID            0x008
+#define PCIX0_CLS              0x009
+#define PCIX0_CACHELS          0x00c
+#define PCIX0_LATTIM           0x00d
+#define PCIX0_HDTYPE           0x00e
+#define PCIX0_BIST             0x00f
+#define PCIX0_BAR0L            0x010
+#define PCIX0_BAR0H            0x014
+#define PCIX0_BAR1             0x018
+#define PCIX0_BAR2L            0x01c
+#define PCIX0_BAR2H            0x020
+#define PCIX0_BAR3             0x024
+#define PCIX0_CISPTR           0x028
+#define PCIX0_SBSYSVID         0x02c
+#define PCIX0_SBSYSID          0x02e
+#define PCIX0_EROMBA           0x030
+#define PCIX0_CAP              0x034
+#define PCIX0_RES0             0x035
+#define PCIX0_RES1             0x036
+#define PCIX0_RES2             0x038
+#define PCIX0_INTLN            0x03c
+#define PCIX0_INTPN            0x03d
+#define PCIX0_MINGNT           0x03e
+#define PCIX0_MAXLTNCY         0x03f
+#define PCIX0_BRDGOPT1         0x040
+#define PCIX0_BRDGOPT2         0x044
+#define PCIX0_ERREN            0x050
+#define PCIX0_ERRSTS           0x054
+#define PCIX0_PLBBESR          0x058
+#define PCIX0_PLBBEARL         0x05c
+#define PCIX0_PLBBEARH         0x060
+#define PCIX0_POM0LAL          0x068
+#define PCIX0_POM0LAH          0x06c
+#define PCIX0_POM0SA           0x070
+#define PCIX0_POM0PCIAL                0x074
+#define PCIX0_POM0PCIAH                0x078
+#define PCIX0_POM1LAL          0x07c
+#define PCIX0_POM1LAH          0x080
+#define PCIX0_POM1SA           0x084
+#define PCIX0_POM1PCIAL                0x088
+#define PCIX0_POM1PCIAH                0x08c
+#define PCIX0_POM2SA           0x090
+#define PCIX0_PIM0SAL          0x098
+#define PCIX0_PIM0SA           PCIX0_PIM0SAL
+#define PCIX0_PIM0LAL          0x09c
+#define PCIX0_PIM0LAH          0x0a0
+#define PCIX0_PIM1SA           0x0a4
+#define PCIX0_PIM1LAL          0x0a8
+#define PCIX0_PIM1LAH          0x0ac
+#define PCIX0_PIM2SAL          0x0b0
+#define PCIX0_PIM2SA           PCIX0_PIM2SAL
+#define PCIX0_PIM2LAL          0x0b4
+#define PCIX0_PIM2LAH          0x0b8
+#define PCIX0_OMCAPID          0x0c0
+#define PCIX0_OMNIPTR          0x0c1
+#define PCIX0_OMMC             0x0c2
+#define PCIX0_OMMA             0x0c4
+#define PCIX0_OMMUA            0x0c8
+#define PCIX0_OMMDATA          0x0cc
+#define PCIX0_OMMEOI           0x0ce
+#define PCIX0_PMCAPID          0x0d0
+#define PCIX0_PMNIPTR          0x0d1
+#define PCIX0_PMC              0x0d2
+#define PCIX0_PMCSR            0x0d4
+#define PCIX0_PMCSRBSE         0x0d6
+#define PCIX0_PMDATA           0x0d7
+#define PCIX0_PMSCRR           0x0d8
+#define PCIX0_CAPID            0x0dc
+#define PCIX0_NIPTR            0x0dd
+#define PCIX0_CMD              0x0de
+#define PCIX0_STS              0x0e0
+#define PCIX0_IDR              0x0e4
+#define PCIX0_CID              0x0e8
+#define PCIX0_RID              0x0ec
+#define PCIX0_PIM0SAH          0x0f8
+#define PCIX0_PIM2SAH          0x0fc
+#define PCIX0_MSGIL            0x100
+#define PCIX0_MSGIH            0x104
+#define PCIX0_MSGOL            0x108
+#define PCIX0_MSGOH            0x10c
+#define PCIX0_IM               0x1f8
+
+/*
+ * 4xx PCI bridge register definitions
+ */
+#define PCIL0_PMM0LA           0x00
+#define PCIL0_PMM0MA           0x04
+#define PCIL0_PMM0PCILA                0x08
+#define PCIL0_PMM0PCIHA                0x0c
+#define PCIL0_PMM1LA           0x10
+#define PCIL0_PMM1MA           0x14
+#define PCIL0_PMM1PCILA                0x18
+#define PCIL0_PMM1PCIHA                0x1c
+#define PCIL0_PMM2LA           0x20
+#define PCIL0_PMM2MA           0x24
+#define PCIL0_PMM2PCILA                0x28
+#define PCIL0_PMM2PCIHA                0x2c
+#define PCIL0_PTM1MS           0x30
+#define PCIL0_PTM1LA           0x34
+#define PCIL0_PTM2MS           0x38
+#define PCIL0_PTM2LA           0x3c
+
+/*
+ * 4xx PCIe bridge register definitions
+ */
+
+/* DCR offsets */
+#define DCRO_PEGPL_CFGBAH              0x00
+#define DCRO_PEGPL_CFGBAL              0x01
+#define DCRO_PEGPL_CFGMSK              0x02
+#define DCRO_PEGPL_MSGBAH              0x03
+#define DCRO_PEGPL_MSGBAL              0x04
+#define DCRO_PEGPL_MSGMSK              0x05
+#define DCRO_PEGPL_OMR1BAH             0x06
+#define DCRO_PEGPL_OMR1BAL             0x07
+#define DCRO_PEGPL_OMR1MSKH            0x08
+#define DCRO_PEGPL_OMR1MSKL            0x09
+#define DCRO_PEGPL_OMR2BAH             0x0a
+#define DCRO_PEGPL_OMR2BAL             0x0b
+#define DCRO_PEGPL_OMR2MSKH            0x0c
+#define DCRO_PEGPL_OMR2MSKL            0x0d
+#define DCRO_PEGPL_OMR3BAH             0x0e
+#define DCRO_PEGPL_OMR3BAL             0x0f
+#define DCRO_PEGPL_OMR3MSKH            0x10
+#define DCRO_PEGPL_OMR3MSKL            0x11
+#define DCRO_PEGPL_REGBAH              0x12
+#define DCRO_PEGPL_REGBAL              0x13
+#define DCRO_PEGPL_REGMSK              0x14
+#define DCRO_PEGPL_SPECIAL             0x15
+#define DCRO_PEGPL_CFG                 0x16
+#define DCRO_PEGPL_ESR                 0x17
+#define DCRO_PEGPL_EARH                        0x18
+#define DCRO_PEGPL_EARL                        0x19
+#define DCRO_PEGPL_EATR                        0x1a
+
+/* DMER mask */
+#define GPL_DMER_MASK_DISA     0x02000000
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1                 0x03a0
+#define PESDR0_PLLLCT2                 0x03a1
+#define PESDR0_PLLLCT3                 0x03a2
+
+/*
+ * 440SPe additional DCRs
+ */
+#define PESDR0_440SPE_UTLSET1          0x0300
+#define PESDR0_440SPE_UTLSET2          0x0301
+#define PESDR0_440SPE_DLPSET           0x0302
+#define PESDR0_440SPE_LOOP             0x0303
+#define PESDR0_440SPE_RCSSET           0x0304
+#define PESDR0_440SPE_RCSSTS           0x0305
+#define PESDR0_440SPE_HSSL0SET1                0x0306
+#define PESDR0_440SPE_HSSL0SET2                0x0307
+#define PESDR0_440SPE_HSSL0STS         0x0308
+#define PESDR0_440SPE_HSSL1SET1                0x0309
+#define PESDR0_440SPE_HSSL1SET2                0x030a
+#define PESDR0_440SPE_HSSL1STS         0x030b
+#define PESDR0_440SPE_HSSL2SET1                0x030c
+#define PESDR0_440SPE_HSSL2SET2                0x030d
+#define PESDR0_440SPE_HSSL2STS         0x030e
+#define PESDR0_440SPE_HSSL3SET1                0x030f
+#define PESDR0_440SPE_HSSL3SET2                0x0310
+#define PESDR0_440SPE_HSSL3STS         0x0311
+#define PESDR0_440SPE_HSSL4SET1                0x0312
+#define PESDR0_440SPE_HSSL4SET2                0x0313
+#define PESDR0_440SPE_HSSL4STS         0x0314
+#define PESDR0_440SPE_HSSL5SET1                0x0315
+#define PESDR0_440SPE_HSSL5SET2                0x0316
+#define PESDR0_440SPE_HSSL5STS         0x0317
+#define PESDR0_440SPE_HSSL6SET1                0x0318
+#define PESDR0_440SPE_HSSL6SET2                0x0319
+#define PESDR0_440SPE_HSSL6STS         0x031a
+#define PESDR0_440SPE_HSSL7SET1                0x031b
+#define PESDR0_440SPE_HSSL7SET2                0x031c
+#define PESDR0_440SPE_HSSL7STS         0x031d
+#define PESDR0_440SPE_HSSCTLSET                0x031e
+#define PESDR0_440SPE_LANE_ABCD                0x031f
+#define PESDR0_440SPE_LANE_EFGH                0x0320
+
+#define PESDR1_440SPE_UTLSET1          0x0340
+#define PESDR1_440SPE_UTLSET2          0x0341
+#define PESDR1_440SPE_DLPSET           0x0342
+#define PESDR1_440SPE_LOOP             0x0343
+#define PESDR1_440SPE_RCSSET           0x0344
+#define PESDR1_440SPE_RCSSTS           0x0345
+#define PESDR1_440SPE_HSSL0SET1                0x0346
+#define PESDR1_440SPE_HSSL0SET2                0x0347
+#define PESDR1_440SPE_HSSL0STS         0x0348
+#define PESDR1_440SPE_HSSL1SET1                0x0349
+#define PESDR1_440SPE_HSSL1SET2                0x034a
+#define PESDR1_440SPE_HSSL1STS         0x034b
+#define PESDR1_440SPE_HSSL2SET1                0x034c
+#define PESDR1_440SPE_HSSL2SET2                0x034d
+#define PESDR1_440SPE_HSSL2STS         0x034e
+#define PESDR1_440SPE_HSSL3SET1                0x034f
+#define PESDR1_440SPE_HSSL3SET2                0x0350
+#define PESDR1_440SPE_HSSL3STS         0x0351
+#define PESDR1_440SPE_HSSCTLSET                0x0352
+#define PESDR1_440SPE_LANE_ABCD                0x0353
+
+#define PESDR2_440SPE_UTLSET1          0x0370
+#define PESDR2_440SPE_UTLSET2          0x0371
+#define PESDR2_440SPE_DLPSET           0x0372
+#define PESDR2_440SPE_LOOP             0x0373
+#define PESDR2_440SPE_RCSSET           0x0374
+#define PESDR2_440SPE_RCSSTS           0x0375
+#define PESDR2_440SPE_HSSL0SET1                0x0376
+#define PESDR2_440SPE_HSSL0SET2                0x0377
+#define PESDR2_440SPE_HSSL0STS         0x0378
+#define PESDR2_440SPE_HSSL1SET1                0x0379
+#define PESDR2_440SPE_HSSL1SET2                0x037a
+#define PESDR2_440SPE_HSSL1STS         0x037b
+#define PESDR2_440SPE_HSSL2SET1                0x037c
+#define PESDR2_440SPE_HSSL2SET2                0x037d
+#define PESDR2_440SPE_HSSL2STS         0x037e
+#define PESDR2_440SPE_HSSL3SET1                0x037f
+#define PESDR2_440SPE_HSSL3SET2                0x0380
+#define PESDR2_440SPE_HSSL3STS         0x0381
+#define PESDR2_440SPE_HSSCTLSET                0x0382
+#define PESDR2_440SPE_LANE_ABCD                0x0383
+
+/*
+ * 405EX additional DCRs
+ */
+#define PESDR0_405EX_UTLSET1           0x0400
+#define PESDR0_405EX_UTLSET2           0x0401
+#define PESDR0_405EX_DLPSET            0x0402
+#define PESDR0_405EX_LOOP              0x0403
+#define PESDR0_405EX_RCSSET            0x0404
+#define PESDR0_405EX_RCSSTS            0x0405
+#define PESDR0_405EX_PHYSET1           0x0406
+#define PESDR0_405EX_PHYSET2           0x0407
+#define PESDR0_405EX_BIST              0x0408
+#define PESDR0_405EX_LPB               0x040B
+#define PESDR0_405EX_PHYSTA            0x040C
+
+#define PESDR1_405EX_UTLSET1           0x0440
+#define PESDR1_405EX_UTLSET2           0x0441
+#define PESDR1_405EX_DLPSET            0x0442
+#define PESDR1_405EX_LOOP              0x0443
+#define PESDR1_405EX_RCSSET            0x0444
+#define PESDR1_405EX_RCSSTS            0x0445
+#define PESDR1_405EX_PHYSET1           0x0446
+#define PESDR1_405EX_PHYSET2           0x0447
+#define PESDR1_405EX_BIST              0x0448
+#define PESDR1_405EX_LPB               0x044B
+#define PESDR1_405EX_PHYSTA            0x044C
+
+/*
+ * Of the above, some are common offsets from the base
+ */
+#define PESDRn_UTLSET1                 0x00
+#define PESDRn_UTLSET2                 0x01
+#define PESDRn_DLPSET                  0x02
+#define PESDRn_LOOP                    0x03
+#define PESDRn_RCSSET                  0x04
+#define PESDRn_RCSSTS                  0x05
+
+/* 440spe only */
+#define PESDRn_440SPE_HSSL0SET1                0x06
+#define PESDRn_440SPE_HSSL0SET2                0x07
+#define PESDRn_440SPE_HSSL0STS         0x08
+#define PESDRn_440SPE_HSSL1SET1                0x09
+#define PESDRn_440SPE_HSSL1SET2                0x0a
+#define PESDRn_440SPE_HSSL1STS         0x0b
+#define PESDRn_440SPE_HSSL2SET1                0x0c
+#define PESDRn_440SPE_HSSL2SET2                0x0d
+#define PESDRn_440SPE_HSSL2STS         0x0e
+#define PESDRn_440SPE_HSSL3SET1                0x0f
+#define PESDRn_440SPE_HSSL3SET2                0x10
+#define PESDRn_440SPE_HSSL3STS         0x11
+
+/* 440spe port 0 only */
+#define PESDRn_440SPE_HSSL4SET1                0x12
+#define PESDRn_440SPE_HSSL4SET2                0x13
+#define PESDRn_440SPE_HSSL4STS         0x14
+#define PESDRn_440SPE_HSSL5SET1                0x15
+#define PESDRn_440SPE_HSSL5SET2                0x16
+#define PESDRn_440SPE_HSSL5STS         0x17
+#define PESDRn_440SPE_HSSL6SET1                0x18
+#define PESDRn_440SPE_HSSL6SET2                0x19
+#define PESDRn_440SPE_HSSL6STS         0x1a
+#define PESDRn_440SPE_HSSL7SET1                0x1b
+#define PESDRn_440SPE_HSSL7SET2                0x1c
+#define PESDRn_440SPE_HSSL7STS         0x1d
+
+/* 405ex only */
+#define PESDRn_405EX_PHYSET1           0x06
+#define PESDRn_405EX_PHYSET2           0x07
+#define PESDRn_405EX_PHYSTA            0x0c
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBCTL            0x00
+#define PEUTL_PBBSZ            0x20
+#define PEUTL_OPDBSZ           0x68
+#define PEUTL_IPHBSZ           0x70
+#define PEUTL_IPDBSZ           0x78
+#define PEUTL_OUTTR            0x90
+#define PEUTL_INTR             0x98
+#define PEUTL_PCTL             0xa0
+#define PEUTL_RCSTA            0xB0
+#define PEUTL_RCIRQEN          0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_ECRTCTL          0x074
+
+#define PECFG_BAR0LMPA         0x210
+#define PECFG_BAR0HMPA         0x214
+#define PECFG_BAR1MPA          0x218
+#define PECFG_BAR2LMPA         0x220
+#define PECFG_BAR2HMPA         0x224
+
+#define PECFG_PIMEN            0x33c
+#define PECFG_PIM0LAL          0x340
+#define PECFG_PIM0LAH          0x344
+#define PECFG_PIM1LAL          0x348
+#define PECFG_PIM1LAH          0x34c
+#define PECFG_PIM01SAL         0x350
+#define PECFG_PIM01SAH         0x354
+
+#define PECFG_POM0LAL          0x380
+#define PECFG_POM0LAH          0x384
+#define PECFG_POM1LAL          0x388
+#define PECFG_POM1LAH          0x38c
+#define PECFG_POM2LAL          0x390
+#define PECFG_POM2LAH          0x394
+
+
+enum
+{
+       PTYPE_ENDPOINT          = 0x0,
+       PTYPE_LEGACY_ENDPOINT   = 0x1,
+       PTYPE_ROOT_PORT         = 0x4,
+
+       LNKW_X1                 = 0x1,
+       LNKW_X4                 = 0x4,
+       LNKW_X8                 = 0x8
+};
+
+
+#endif /* __PPC4XX_PCI_H__ */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/qe_lib/Kconfig powerpc.git/arch/powerpc/sysdev/qe_lib/Kconfig
--- linux-2.6.24/arch/powerpc/sysdev/qe_lib/Kconfig     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/qe_lib/Kconfig      2008-01-28 20:25:49.000000000 +0100
@@ -4,7 +4,7 @@
 
 config UCC_SLOW
        bool
-       default n
+       default y if SERIAL_QE
        help
          This option provides qe_lib support to UCC slow
          protocols: UART, BISYNC, QMC
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/qe_lib/qe.c powerpc.git/arch/powerpc/sysdev/qe_lib/qe.c
--- linux-2.6.24/arch/powerpc/sysdev/qe_lib/qe.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/qe_lib/qe.c 2008-01-28 20:25:49.000000000 +0100
@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
+#include <linux/crc32.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -167,19 +168,20 @@
 
 /* Program the BRG to the given sampling rate and multiplier
  *
- * @brg: the BRG, 1-16
+ * @brg: the BRG, QE_BRG1 - QE_BRG16
  * @rate: the desired sampling rate
  * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
  * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
  * then 'multiplier' should be 8.
- *
- * Also note that the value programmed into the BRGC register must be even.
  */
-void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier)
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
 {
        u32 divisor, tempval;
        u32 div16 = 0;
 
+       if ((brg < QE_BRG1) || (brg > QE_BRG16))
+               return -EINVAL;
+
        divisor = get_brg_clk() / (rate * multiplier);
 
        if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
@@ -196,8 +198,43 @@
        tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
                QE_BRGC_ENABLE | div16;
 
-       out_be32(&qe_immr->brg.brgc[brg - 1], tempval);
+       out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
+
+       return 0;
+}
+EXPORT_SYMBOL(qe_setbrg);
+
+/* Convert a string to a QE clock source enum
+ *
+ * This function takes a string, typically from a property in the device
+ * tree, and returns the corresponding "enum qe_clock" value.
+*/
+enum qe_clock qe_clock_source(const char *source)
+{
+       unsigned int i;
+
+       if (strcasecmp(source, "none") == 0)
+               return QE_CLK_NONE;
+
+       if (strncasecmp(source, "brg", 3) == 0) {
+               i = simple_strtoul(source + 3, NULL, 10);
+               if ((i >= 1) && (i <= 16))
+                       return (QE_BRG1 - 1) + i;
+               else
+                       return QE_CLK_DUMMY;
+       }
+
+       if (strncasecmp(source, "clk", 3) == 0) {
+               i = simple_strtoul(source + 3, NULL, 10);
+               if ((i >= 1) && (i <= 24))
+                       return (QE_CLK1 - 1) + i;
+               else
+                       return QE_CLK_DUMMY;
+       }
+
+       return QE_CLK_DUMMY;
 }
+EXPORT_SYMBOL(qe_clock_source);
 
 /* Initialize SNUMs (thread serial numbers) according to
  * QE Module Control chapter, SNUM table
@@ -358,3 +395,249 @@
        return (void *)&qe_immr->muram[offset];
 }
 EXPORT_SYMBOL(qe_muram_addr);
+
+/* The maximum number of RISCs we support */
+#define MAX_QE_RISC     2
+
+/* Firmware information stored here for qe_get_firmware_info() */
+static struct qe_firmware_info qe_firmware_info;
+
+/*
+ * Set to 1 if QE firmware has been uploaded, and therefore
+ * qe_firmware_info contains valid data.
+ */
+static int qe_firmware_uploaded;
+
+/*
+ * Upload a QE microcode
+ *
+ * This function is a worker function for qe_upload_firmware().  It does
+ * the actual uploading of the microcode.
+ */
+static void qe_upload_microcode(const void *base,
+       const struct qe_microcode *ucode)
+{
+       const __be32 *code = base + be32_to_cpu(ucode->code_offset);
+       unsigned int i;
+
+       if (ucode->major || ucode->minor || ucode->revision)
+               printk(KERN_INFO "qe-firmware: "
+                       "uploading microcode '%s' version %u.%u.%u\n",
+                       ucode->id, ucode->major, ucode->minor, ucode->revision);
+       else
+               printk(KERN_INFO "qe-firmware: "
+                       "uploading microcode '%s'\n", ucode->id);
+
+       /* Use auto-increment */
+       out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
+               QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+
+       for (i = 0; i < be32_to_cpu(ucode->count); i++)
+               out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+}
+
+/*
+ * Upload a microcode to the I-RAM at a specific address.
+ *
+ * See Documentation/powerpc/qe-firmware.txt for information on QE microcode
+ * uploading.
+ *
+ * Currently, only version 1 is supported, so the 'version' field must be
+ * set to 1.
+ *
+ * The SOC model and revision are not validated, they are only displayed for
+ * informational purposes.
+ *
+ * 'calc_size' is the calculated size, in bytes, of the firmware structure and
+ * all of the microcode structures, minus the CRC.
+ *
+ * 'length' is the size that the structure says it is, including the CRC.
+ */
+int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+       unsigned int i;
+       unsigned int j;
+       u32 crc;
+       size_t calc_size = sizeof(struct qe_firmware);
+       size_t length;
+       const struct qe_header *hdr;
+
+       if (!firmware) {
+               printk(KERN_ERR "qe-firmware: invalid pointer\n");
+               return -EINVAL;
+       }
+
+       hdr = &firmware->header;
+       length = be32_to_cpu(hdr->length);
+
+       /* Check the magic */
+       if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+           (hdr->magic[2] != 'F')) {
+               printk(KERN_ERR "qe-firmware: not a microcode\n");
+               return -EPERM;
+       }
+
+       /* Check the version */
+       if (hdr->version != 1) {
+               printk(KERN_ERR "qe-firmware: unsupported version\n");
+               return -EPERM;
+       }
+
+       /* Validate some of the fields */
+       if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
+               printk(KERN_ERR "qe-firmware: invalid data\n");
+               return -EINVAL;
+       }
+
+       /* Validate the length and check if there's a CRC */
+       calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
+
+       for (i = 0; i < firmware->count; i++)
+               /*
+                * For situations where the second RISC uses the same microcode
+                * as the first, the 'code_offset' and 'count' fields will be
+                * zero, so it's okay to add those.
+                */
+               calc_size += sizeof(__be32) *
+                       be32_to_cpu(firmware->microcode[i].count);
+
+       /* Validate the length */
+       if (length != calc_size + sizeof(__be32)) {
+               printk(KERN_ERR "qe-firmware: invalid length\n");
+               return -EPERM;
+       }
+
+       /* Validate the CRC */
+       crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
+       if (crc != crc32(0, firmware, calc_size)) {
+               printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
+               return -EIO;
+       }
+
+       /*
+        * If the microcode calls for it, split the I-RAM.
+        */
+       if (!firmware->split)
+               setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
+
+       if (firmware->soc.model)
+               printk(KERN_INFO
+                       "qe-firmware: firmware '%s' for %u V%u.%u\n",
+                       firmware->id, be16_to_cpu(firmware->soc.model),
+                       firmware->soc.major, firmware->soc.minor);
+       else
+               printk(KERN_INFO "qe-firmware: firmware '%s'\n",
+                       firmware->id);
+
+       /*
+        * The QE only supports one microcode per RISC, so clear out all the
+        * saved microcode information and put in the new.
+        */
+       memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
+       strcpy(qe_firmware_info.id, firmware->id);
+       qe_firmware_info.extended_modes = firmware->extended_modes;
+       memcpy(qe_firmware_info.vtraps, firmware->vtraps,
+               sizeof(firmware->vtraps));
+
+       /* Loop through each microcode. */
+       for (i = 0; i < firmware->count; i++) {
+               const struct qe_microcode *ucode = &firmware->microcode[i];
+
+               /* Upload a microcode if it's present */
+               if (ucode->code_offset)
+                       qe_upload_microcode(firmware, ucode);
+
+               /* Program the traps for this processor */
+               for (j = 0; j < 16; j++) {
+                       u32 trap = be32_to_cpu(ucode->traps[j]);
+
+                       if (trap)
+                               out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+               }
+
+               /* Enable traps */
+               out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+       }
+
+       qe_firmware_uploaded = 1;
+
+       return 0;
+}
+EXPORT_SYMBOL(qe_upload_firmware);
+
+/*
+ * Get info on the currently-loaded firmware
+ *
+ * This function also checks the device tree to see if the boot loader has
+ * uploaded a firmware already.
+ */
+struct qe_firmware_info *qe_get_firmware_info(void)
+{
+       static int initialized;
+       struct property *prop;
+       struct device_node *qe;
+       struct device_node *fw = NULL;
+       const char *sprop;
+       unsigned int i;
+
+       /*
+        * If we haven't checked yet, and a driver hasn't uploaded a firmware
+        * yet, then check the device tree for information.
+        */
+       if (initialized || qe_firmware_uploaded)
+               return NULL;
+
+       initialized = 1;
+
+       /*
+        * Newer device trees have an "fsl,qe" compatible property for the QE
+        * node, but we still need to support older device trees.
+       */
+       qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+       if (!qe) {
+               qe = of_find_node_by_type(NULL, "qe");
+               if (!qe)
+                       return NULL;
+       }
+
+       /* Find the 'firmware' child node */
+       for_each_child_of_node(qe, fw) {
+               if (strcmp(fw->name, "firmware") == 0)
+                       break;
+       }
+
+       of_node_put(qe);
+
+       /* Did we find the 'firmware' node? */
+       if (!fw)
+               return NULL;
+
+       qe_firmware_uploaded = 1;
+
+       /* Copy the data into qe_firmware_info*/
+       sprop = of_get_property(fw, "id", NULL);
+       if (sprop)
+               strncpy(qe_firmware_info.id, sprop,
+                       sizeof(qe_firmware_info.id) - 1);
+
+       prop = of_find_property(fw, "extended-modes", NULL);
+       if (prop && (prop->length == sizeof(u64))) {
+               const u64 *iprop = prop->value;
+
+               qe_firmware_info.extended_modes = *iprop;
+       }
+
+       prop = of_find_property(fw, "virtual-traps", NULL);
+       if (prop && (prop->length == 32)) {
+               const u32 *iprop = prop->value;
+
+               for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
+                       qe_firmware_info.vtraps[i] = iprop[i];
+       }
+
+       of_node_put(fw);
+
+       return &qe_firmware_info;
+}
+EXPORT_SYMBOL(qe_get_firmware_info);
+
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/qe_lib/ucc_slow.c powerpc.git/arch/powerpc/sysdev/qe_lib/ucc_slow.c
--- linux-2.6.24/arch/powerpc/sysdev/qe_lib/ucc_slow.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/qe_lib/ucc_slow.c   2008-01-28 20:25:49.000000000 +0100
@@ -19,6 +19,7 @@
 #include <linux/stddef.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/immap_qe.h>
@@ -41,6 +42,7 @@
        default: return QE_CR_SUBBLOCK_INVALID;
        }
 }
+EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
 
 void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
 {
@@ -56,6 +58,7 @@
        qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
                         QE_CR_PROTOCOL_UNSPECIFIED, 0);
 }
+EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
 
 void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
 {
@@ -65,6 +68,7 @@
        id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
        qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
 }
+EXPORT_SYMBOL(ucc_slow_stop_tx);
 
 void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
 {
@@ -74,6 +78,7 @@
        id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
        qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
 }
+EXPORT_SYMBOL(ucc_slow_restart_tx);
 
 void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
 {
@@ -94,6 +99,7 @@
        }
        out_be32(&us_regs->gumr_l, gumr_l);
 }
+EXPORT_SYMBOL(ucc_slow_enable);
 
 void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
 {
@@ -114,6 +120,7 @@
        }
        out_be32(&us_regs->gumr_l, gumr_l);
 }
+EXPORT_SYMBOL(ucc_slow_disable);
 
 /* Initialize the UCC for Slow operations
  *
@@ -347,6 +354,7 @@
        *uccs_ret = uccs;
        return 0;
 }
+EXPORT_SYMBOL(ucc_slow_init);
 
 void ucc_slow_free(struct ucc_slow_private * uccs)
 {
@@ -366,5 +374,5 @@
 
        kfree(uccs);
 }
-
+EXPORT_SYMBOL(ucc_slow_free);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/tsi108_dev.c powerpc.git/arch/powerpc/sysdev/tsi108_dev.c
--- linux-2.6.24/arch/powerpc/sysdev/tsi108_dev.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/tsi108_dev.c        2008-01-28 20:25:49.000000000 +0100
@@ -66,14 +66,12 @@
 static int __init tsi108_eth_of_init(void)
 {
        struct device_node *np;
-       unsigned int i;
+       unsigned int i = 0;
        struct platform_device *tsi_eth_dev;
        struct resource res;
        int ret;
 
-       for (np = NULL, i = 0;
-            (np = of_find_compatible_node(np, "network", "tsi108-ethernet")) != NULL;
-            i++) {
+       for_each_compatible_node(np, "network", "tsi108-ethernet") {
                struct resource r[2];
                struct device_node *phy, *mdio;
                hw_info tsi_eth_data;
@@ -98,7 +96,7 @@
                        __FUNCTION__,r[1].name, r[1].start, r[1].end);
 
                tsi_eth_dev =
-                   platform_device_register_simple("tsi-ethernet", i, &r[0],
+                   platform_device_register_simple("tsi-ethernet", i++, &r[0],
                                                    1);
 
                if (IS_ERR(tsi_eth_dev)) {
@@ -154,6 +152,7 @@
 unreg:
        platform_device_unregister(tsi_eth_dev);
 err:
+       of_node_put(np);
        return ret;
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/uic.c powerpc.git/arch/powerpc/sysdev/uic.c
--- linux-2.6.24/arch/powerpc/sysdev/uic.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/uic.c       2008-01-28 20:25:49.000000000 +0100
@@ -53,21 +53,23 @@
 
        /* The remapper for this UIC */
        struct irq_host *irqhost;
-
-       /* For secondary UICs, the cascade interrupt's irqaction */
-       struct irqaction cascade;
 };
 
 static void uic_unmask_irq(unsigned int virq)
 {
+       struct irq_desc *desc = get_irq_desc(virq);
        struct uic *uic = get_irq_chip_data(virq);
        unsigned int src = uic_irq_to_hw(virq);
        unsigned long flags;
-       u32 er;
+       u32 er, sr;
 
+       sr = 1 << (31-src);
        spin_lock_irqsave(&uic->lock, flags);
+       /* ack level-triggered interrupts here */
+       if (desc->status & IRQ_LEVEL)
+               mtdcr(uic->dcrbase + UIC_SR, sr);
        er = mfdcr(uic->dcrbase + UIC_ER);
-       er |= 1 << (31 - src);
+       er |= sr;
        mtdcr(uic->dcrbase + UIC_ER, er);
        spin_unlock_irqrestore(&uic->lock, flags);
 }
@@ -99,6 +101,7 @@
 
 static void uic_mask_ack_irq(unsigned int virq)
 {
+       struct irq_desc *desc = get_irq_desc(virq);
        struct uic *uic = get_irq_chip_data(virq);
        unsigned int src = uic_irq_to_hw(virq);
        unsigned long flags;
@@ -109,7 +112,16 @@
        er = mfdcr(uic->dcrbase + UIC_ER);
        er &= ~sr;
        mtdcr(uic->dcrbase + UIC_ER, er);
-       mtdcr(uic->dcrbase + UIC_SR, sr);
+       /* On the UIC, acking (i.e. clearing the SR bit)
+        * a level irq will have no effect if the interrupt
+        * is still asserted by the device, even if
+        * the interrupt is already masked. Therefore
+        * we only ack the egde interrupts here, while
+        * level interrupts are ack'ed after the actual
+        * isr call in the uic_unmask_irq()
+        */
+       if (!(desc->status & IRQ_LEVEL))
+               mtdcr(uic->dcrbase + UIC_SR, sr);
        spin_unlock_irqrestore(&uic->lock, flags);
 }
 
@@ -173,64 +185,6 @@
        .set_type       = uic_set_irq_type,
 };
 
-/**
- *     handle_uic_irq - irq flow handler for UIC
- *     @irq:   the interrupt number
- *     @desc:  the interrupt description structure for this irq
- *
- * This is modified version of the generic handle_level_irq() suitable
- * for the UIC.  On the UIC, acking (i.e. clearing the SR bit) a level
- * irq will have no effect if the interrupt is still asserted by the
- * device, even if the interrupt is already masked.  Therefore, unlike
- * the standard handle_level_irq(), we must ack the interrupt *after*
- * invoking the ISR (which should have de-asserted the interrupt in
- * the external source).  For edge interrupts we ack at the beginning
- * instead of the end, to keep the window in which we can miss an
- * interrupt as small as possible.
- */
-void fastcall handle_uic_irq(unsigned int irq, struct irq_desc *desc)
-{
-       unsigned int cpu = smp_processor_id();
-       struct irqaction *action;
-       irqreturn_t action_ret;
-
-       spin_lock(&desc->lock);
-       if (desc->status & IRQ_LEVEL)
-               desc->chip->mask(irq);
-       else
-               desc->chip->mask_ack(irq);
-
-       if (unlikely(desc->status & IRQ_INPROGRESS))
-               goto out_unlock;
-       desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
-       kstat_cpu(cpu).irqs[irq]++;
-
-       /*
-        * If its disabled or no action available
-        * keep it masked and get out of here
-        */
-       action = desc->action;
-       if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
-               desc->status |= IRQ_PENDING;
-               goto out_unlock;
-       }
-
-       desc->status |= IRQ_INPROGRESS;
-       desc->status &= ~IRQ_PENDING;
-       spin_unlock(&desc->lock);
-
-       action_ret = handle_IRQ_event(irq, action);
-
-       spin_lock(&desc->lock);
-       desc->status &= ~IRQ_INPROGRESS;
-       if (desc->status & IRQ_LEVEL)
-               desc->chip->ack(irq);
-       if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
-               desc->chip->unmask(irq);
-out_unlock:
-       spin_unlock(&desc->lock);
-}
-
 static int uic_host_map(struct irq_host *h, unsigned int virq,
                        irq_hw_number_t hw)
 {
@@ -239,7 +193,7 @@
        set_irq_chip_data(virq, uic);
        /* Despite the name, handle_level_irq() works for both level
         * and edge irqs on UIC.  FIXME: check this is correct */
-       set_irq_chip_and_handler(virq, &uic_irq_chip, handle_uic_irq);
+       set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq);
 
        /* Set default irq type */
        set_irq_type(virq, IRQ_TYPE_NONE);
@@ -264,23 +218,36 @@
        .xlate  = uic_host_xlate,
 };
 
-irqreturn_t uic_cascade(int virq, void *data)
+void uic_irq_cascade(unsigned int virq, struct irq_desc *desc)
 {
-       struct uic *uic = data;
+       struct uic *uic = get_irq_data(virq);
        u32 msr;
        int src;
        int subvirq;
 
+       spin_lock(&desc->lock);
+       if (desc->status & IRQ_LEVEL)
+               desc->chip->mask(virq);
+       else
+               desc->chip->mask_ack(virq);
+       spin_unlock(&desc->lock);
+
        msr = mfdcr(uic->dcrbase + UIC_MSR);
        if (!msr) /* spurious interrupt */
-               return IRQ_HANDLED;
+               goto uic_irq_ret;
 
        src = 32 - ffs(msr);
 
        subvirq = irq_linear_revmap(uic->irqhost, src);
        generic_handle_irq(subvirq);
 
-       return IRQ_HANDLED;
+uic_irq_ret:
+       spin_lock(&desc->lock);
+       if (desc->status & IRQ_LEVEL)
+               desc->chip->ack(virq);
+       if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+               desc->chip->unmask(virq);
+       spin_unlock(&desc->lock);
 }
 
 static struct uic * __init uic_init_one(struct device_node *node)
@@ -342,33 +309,27 @@
        const u32 *interrupts;
 
        /* First locate and initialize the top-level UIC */
-
-       np = of_find_compatible_node(NULL, NULL, "ibm,uic");
-       while (np) {
+       for_each_compatible_node(np, NULL, "ibm,uic") {
                interrupts = of_get_property(np, "interrupts", NULL);
-               if (! interrupts)
+               if (!interrupts)
                        break;
-
-               np = of_find_compatible_node(np, NULL, "ibm,uic");
        }
 
        BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the
                      * top-level interrupt controller */
        primary_uic = uic_init_one(np);
-       if (! primary_uic)
+       if (!primary_uic)
                panic("Unable to initialize primary UIC %s\n", np->full_name);
 
        irq_set_default_host(primary_uic->irqhost);
        of_node_put(np);
 
        /* The scan again for cascaded UICs */
-       np = of_find_compatible_node(NULL, NULL, "ibm,uic");
-       while (np) {
+       for_each_compatible_node(np, NULL, "ibm,uic") {
                interrupts = of_get_property(np, "interrupts", NULL);
                if (interrupts) {
                        /* Secondary UIC */
                        int cascade_virq;
-                       int ret;
 
                        uic = uic_init_one(np);
                        if (! uic)
@@ -377,20 +338,11 @@
 
                        cascade_virq = irq_of_parse_and_map(np, 0);
 
-                       uic->cascade.handler = uic_cascade;
-                       uic->cascade.name = "UIC cascade";
-                       uic->cascade.dev_id = uic;
-
-                       ret = setup_irq(cascade_virq, &uic->cascade);
-                       if (ret)
-                               printk(KERN_ERR "Failed to setup_irq(%d) for "
-                                      "UIC%d cascade\n", cascade_virq,
-                                      uic->index);
+                       set_irq_data(cascade_virq, uic);
+                       set_irq_chained_handler(cascade_virq, uic_irq_cascade);
 
                        /* FIXME: setup critical cascade?? */
                }
-
-               np = of_find_compatible_node(np, NULL, "ibm,uic");
        }
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/sysdev/xilinx_intc.c powerpc.git/arch/powerpc/sysdev/xilinx_intc.c
--- linux-2.6.24/arch/powerpc/sysdev/xilinx_intc.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/sysdev/xilinx_intc.c       2008-01-28 20:25:49.000000000 +0100
@@ -135,10 +135,16 @@
        struct device_node *np;
 
        /* find top level interrupt controller */
-       for_each_compatible_node(np, NULL, "xilinx,intc") {
+       for_each_compatible_node(np, NULL, "xlnx,opb-intc-1.00.c") {
                if (!of_get_property(np, "interrupts", NULL))
                        break;
        }
+       if (!np) {
+               for_each_compatible_node(np, NULL, "xlnx,xps-intc-1.00.a") {
+                       if (!of_get_property(np, "interrupts", NULL))
+                               break;
+               }
+       }
 
        /* xilinx interrupt controller needs to be top level */
        BUG_ON(!np);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/xmon/setjmp.S powerpc.git/arch/powerpc/xmon/setjmp.S
--- linux-2.6.24/arch/powerpc/xmon/setjmp.S     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/xmon/setjmp.S      2008-01-28 20:25:49.000000000 +0100
@@ -12,67 +12,6 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 
-_GLOBAL(xmon_setjmp)
-       mflr    r0
-       PPC_STL r0,0(r3)
-       PPC_STL r1,SZL(r3)
-       PPC_STL r2,2*SZL(r3)
-       mfcr    r0
-       PPC_STL r0,3*SZL(r3)
-       PPC_STL r13,4*SZL(r3)
-       PPC_STL r14,5*SZL(r3)
-       PPC_STL r15,6*SZL(r3)
-       PPC_STL r16,7*SZL(r3)
-       PPC_STL r17,8*SZL(r3)
-       PPC_STL r18,9*SZL(r3)
-       PPC_STL r19,10*SZL(r3)
-       PPC_STL r20,11*SZL(r3)
-       PPC_STL r21,12*SZL(r3)
-       PPC_STL r22,13*SZL(r3)
-       PPC_STL r23,14*SZL(r3)
-       PPC_STL r24,15*SZL(r3)
-       PPC_STL r25,16*SZL(r3)
-       PPC_STL r26,17*SZL(r3)
-       PPC_STL r27,18*SZL(r3)
-       PPC_STL r28,19*SZL(r3)
-       PPC_STL r29,20*SZL(r3)
-       PPC_STL r30,21*SZL(r3)
-       PPC_STL r31,22*SZL(r3)
-       li      r3,0
-       blr
-
-_GLOBAL(xmon_longjmp)
-       PPC_LCMPI r4,0
-       bne     1f
-       li      r4,1
-1:     PPC_LL  r13,4*SZL(r3)
-       PPC_LL  r14,5*SZL(r3)
-       PPC_LL  r15,6*SZL(r3)
-       PPC_LL  r16,7*SZL(r3)
-       PPC_LL  r17,8*SZL(r3)
-       PPC_LL  r18,9*SZL(r3)
-       PPC_LL  r19,10*SZL(r3)
-       PPC_LL  r20,11*SZL(r3)
-       PPC_LL  r21,12*SZL(r3)
-       PPC_LL  r22,13*SZL(r3)
-       PPC_LL  r23,14*SZL(r3)
-       PPC_LL  r24,15*SZL(r3)
-       PPC_LL  r25,16*SZL(r3)
-       PPC_LL  r26,17*SZL(r3)
-       PPC_LL  r27,18*SZL(r3)
-       PPC_LL  r28,19*SZL(r3)
-       PPC_LL  r29,20*SZL(r3)
-       PPC_LL  r30,21*SZL(r3)
-       PPC_LL  r31,22*SZL(r3)
-       PPC_LL  r0,3*SZL(r3)
-       mtcrf   0x38,r0
-       PPC_LL  r0,0(r3)
-       PPC_LL  r1,SZL(r3)
-       PPC_LL  r2,2*SZL(r3)
-       mtlr    r0
-       mr      r3,r4
-       blr
-
 /*
  * Grab the register values as they are now.
  * This won't do a particularily good job because we really
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/powerpc/xmon/xmon.c powerpc.git/arch/powerpc/xmon/xmon.c
--- linux-2.6.24/arch/powerpc/xmon/xmon.c       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/powerpc/xmon/xmon.c        2008-01-28 20:25:49.000000000 +0100
@@ -40,6 +40,7 @@
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
 #include <asm/firmware.h>
+#include <asm/setjmp.h>
 
 #ifdef CONFIG_PPC64
 #include <asm/hvcall.h>
@@ -71,12 +72,9 @@
 static int termch;
 static char tmpstr[128];
 
-#define JMP_BUF_LEN    23
 static long bus_error_jmp[JMP_BUF_LEN];
 static int catch_memory_errors;
 static long *xmon_fault_jmp[NR_CPUS];
-#define setjmp xmon_setjmp
-#define longjmp xmon_longjmp
 
 /* Breakpoint stuff */
 struct bpt {
@@ -153,13 +151,15 @@
 
 static int do_spu_cmd(void);
 
+#ifdef CONFIG_44x
+static void dump_tlb_44x(void);
+#endif
+
 int xmon_no_auto_backtrace;
 
 extern void xmon_enter(void);
 extern void xmon_leave(void);
 
-extern long setjmp(long *);
-extern void longjmp(long *, long);
 extern void xmon_save_regs(struct pt_regs *);
 
 #ifdef CONFIG_PPC64
@@ -231,6 +231,9 @@
 #ifdef CONFIG_PPC_STD_MMU_32
 "  u   dump segment registers\n"
 #endif
+#ifdef CONFIG_44x
+"  u   dump TLB\n"
+#endif
 "  ?   help\n"
 "  zr  reboot\n\
   zh   halt\n"
@@ -856,6 +859,11 @@
                        dump_segments();
                        break;
 #endif
+#ifdef CONFIG_4xx
+               case 'u':
+                       dump_tlb_44x();
+                       break;
+#endif
                default:
                        printf("Unrecognized command: ");
                        do {
@@ -2527,16 +2535,33 @@
 static void dump_slb(void)
 {
        int i;
-       unsigned long tmp;
+       unsigned long esid,vsid,valid;
+       unsigned long llp;
 
        printf("SLB contents of cpu %x\n", smp_processor_id());
 
-       for (i = 0; i < SLB_NUM_ENTRIES; i++) {
-               asm volatile("slbmfee  %0,%1" : "=r" (tmp) : "r" (i));
-               printf("%02d %016lx ", i, tmp);
-
-               asm volatile("slbmfev  %0,%1" : "=r" (tmp) : "r" (i));
-               printf("%016lx\n", tmp);
+       for (i = 0; i < mmu_slb_size; i++) {
+               asm volatile("slbmfee  %0,%1" : "=r" (esid) : "r" (i));
+               asm volatile("slbmfev  %0,%1" : "=r" (vsid) : "r" (i));
+               valid = (esid & SLB_ESID_V);
+               if (valid | esid | vsid) {
+                       printf("%02d %016lx %016lx", i, esid, vsid);
+                       if (valid) {
+                               llp = vsid & SLB_VSID_LLP;
+                               if (vsid & SLB_VSID_B_1T) {
+                                       printf("  1T  ESID=%9lx  VSID=%13lx LLP:%3lx \n",
+                                               GET_ESID_1T(esid),
+                                               (vsid & ~SLB_VSID_B) >> SLB_VSID_SHIFT_1T,
+                                               llp);
+                               } else {
+                                       printf(" 256M ESID=%9lx  VSID=%13lx LLP:%3lx \n",
+                                               GET_ESID(esid),
+                                               (vsid & ~SLB_VSID_B) >> SLB_VSID_SHIFT,
+                                               llp);
+                               }
+                       } else
+                               printf("\n");
+               }
        }
 }
 
@@ -2581,6 +2606,32 @@
 }
 #endif
 
+#ifdef CONFIG_44x
+static void dump_tlb_44x(void)
+{
+       int i;
+
+       for (i = 0; i < PPC44x_TLB_SIZE; i++) {
+               unsigned long w0,w1,w2;
+               asm volatile("tlbre  %0,%1,0" : "=r" (w0) : "r" (i));
+               asm volatile("tlbre  %0,%1,1" : "=r" (w1) : "r" (i));
+               asm volatile("tlbre  %0,%1,2" : "=r" (w2) : "r" (i));
+               printf("[%02x] %08x %08x %08x ", i, w0, w1, w2);
+               if (w0 & PPC44x_TLB_VALID) {
+                       printf("V %08x -> %01x%08x %c%c%c%c%c",
+                              w0 & PPC44x_TLB_EPN_MASK,
+                              w1 & PPC44x_TLB_ERPN_MASK,
+                              w1 & PPC44x_TLB_RPN_MASK,
+                              (w2 & PPC44x_TLB_W) ? 'W' : 'w',
+                              (w2 & PPC44x_TLB_I) ? 'I' : 'i',
+                              (w2 & PPC44x_TLB_M) ? 'M' : 'm',
+                              (w2 & PPC44x_TLB_G) ? 'G' : 'g',
+                              (w2 & PPC44x_TLB_E) ? 'E' : 'e');
+               }
+               printf("\n");
+       }
+}
+#endif /* CONFIG_44x */
 void xmon_init(int enable)
 {
 #ifdef CONFIG_PPC_ISERIES
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/kernel/Makefile powerpc.git/arch/ppc/kernel/Makefile
--- linux-2.6.24/arch/ppc/kernel/Makefile       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/kernel/Makefile        2008-01-28 20:25:50.000000000 +0100
@@ -13,7 +13,6 @@
                                        ppc_htab.o
 obj-$(CONFIG_MODULES)          += ppc_ksyms.o
 obj-$(CONFIG_PCI)              += pci.o
-obj-$(CONFIG_RAPIDIO)          += rio.o
 obj-$(CONFIG_KGDB)             += ppc-stub.o
 obj-$(CONFIG_SMP)              += smp.o smp-tbsync.o
 obj-$(CONFIG_KEXEC)            += machine_kexec.o relocate_kernel.o
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/kernel/head_44x.S powerpc.git/arch/ppc/kernel/head_44x.S
--- linux-2.6.24/arch/ppc/kernel/head_44x.S     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/kernel/head_44x.S      2008-01-28 20:25:50.000000000 +0100
@@ -195,7 +195,7 @@
        li      r5,0
        ori     r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
 
-        li      r0,0                    /* TLB slot 0 */
+       li      r0,62                   /* TLB slot 62 */
 
        tlbwe   r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
        tlbwe   r4,r0,PPC44x_TLB_XLAT   /* Load the translation fields */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/kernel/rio.c powerpc.git/arch/ppc/kernel/rio.c
--- linux-2.6.24/arch/ppc/kernel/rio.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/kernel/rio.c   1970-01-01 01:00:00.000000000 +0100
@@ -1,52 +0,0 @@
-/*
- * RapidIO PPC32 support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/rio.h>
-
-#include <asm/rio.h>
-
-/**
- * platform_rio_init - Do platform specific RIO init
- *
- * Any platform specific initialization of RapdIO
- * hardware is done here as well as registration
- * of any active master ports in the system.
- */
-void __attribute__ ((weak))
-    platform_rio_init(void)
-{
-       printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
-}
-
-/**
- * ppc_rio_init - Do PPC32 RIO init
- *
- * Calls platform-specific RIO init code and then calls
- * rio_init_mports() to initialize any master ports that
- * have been registered with the RIO subsystem.
- */
-static int __init ppc_rio_init(void)
-{
-       printk(KERN_INFO "RIO: RapidIO init\n");
-
-       /* Platform specific initialization */
-       platform_rio_init();
-
-       /* Enumerate all registered ports */
-       rio_init_mports();
-
-       return 0;
-}
-
-subsys_initcall(ppc_rio_init);
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/kernel/setup.c powerpc.git/arch/ppc/kernel/setup.c
--- linux-2.6.24/arch/ppc/kernel/setup.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/kernel/setup.c 2008-01-28 20:25:50.000000000 +0100
@@ -37,7 +37,6 @@
 #include <asm/nvram.h>
 #include <asm/xmon.h>
 #include <asm/ocp.h>
-#include <asm/prom.h>
 
 #define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \
                      defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/kernel/traps.c powerpc.git/arch/ppc/kernel/traps.c
--- linux-2.6.24/arch/ppc/kernel/traps.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/kernel/traps.c 2008-01-28 20:25:50.000000000 +0100
@@ -231,39 +231,25 @@
 {
 }
 
-void machine_check_exception(struct pt_regs *regs)
+#if defined(CONFIG_4xx)
+int machine_check_4xx(struct pt_regs *regs)
 {
        unsigned long reason = get_mc_reason(regs);
 
-       if (user_mode(regs)) {
-               regs->msr |= MSR_RI;
-               _exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
-               return;
-       }
-
-#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
-       /* the qspan pci read routines can cause machine checks -- Cort */
-       bad_page_fault(regs, regs->dar, SIGBUS);
-       return;
-#endif
-
-       if (debugger_fault_handler) {
-               debugger_fault_handler(regs);
-               regs->msr |= MSR_RI;
-               return;
-       }
-
-       if (check_io_access(regs))
-               return;
-
-#if defined(CONFIG_4xx) && !defined(CONFIG_440A)
        if (reason & ESR_IMCP) {
                printk("Instruction");
                mtspr(SPRN_ESR, reason & ~ESR_IMCP);
        } else
                printk("Data");
        printk(" machine check in kernel mode.\n");
-#elif defined(CONFIG_440A)
+
+       return 0;
+}
+
+int machine_check_440A(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        if (reason & ESR_IMCP){
                printk("Instruction Synchronous Machine Check exception\n");
@@ -293,7 +279,13 @@
                /* Clear MCSR */
                mtspr(SPRN_MCSR, mcsr);
        }
-#elif defined (CONFIG_E500)
+       return 0;
+}
+#elif defined(CONFIG_E500)
+int machine_check_e500(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        printk("Caused by (from MCSR=%lx): ", reason);
 
@@ -305,8 +297,6 @@
                printk("Data Cache Push Parity Error\n");
        if (reason & MCSR_DCPERR)
                printk("Data Cache Parity Error\n");
-       if (reason & MCSR_GL_CI)
-               printk("Guarded Load or Cache-Inhibited stwcx.\n");
        if (reason & MCSR_BUS_IAERR)
                printk("Bus - Instruction Address Error\n");
        if (reason & MCSR_BUS_RAERR)
@@ -318,12 +308,19 @@
        if (reason & MCSR_BUS_RBERR)
                printk("Bus - Read Data Bus Error\n");
        if (reason & MCSR_BUS_WBERR)
-               printk("Bus - Write Data Bus Error\n");
+               printk("Bus - Read Data Bus Error\n");
        if (reason & MCSR_BUS_IPERR)
                printk("Bus - Instruction Parity Error\n");
        if (reason & MCSR_BUS_RPERR)
                printk("Bus - Read Parity Error\n");
-#elif defined (CONFIG_E200)
+
+       return 0;
+}
+#elif defined(CONFIG_E200)
+int machine_check_e200(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        printk("Caused by (from MCSR=%lx): ", reason);
 
@@ -341,7 +338,14 @@
                printk("Bus - Read Bus Error on data load\n");
        if (reason & MCSR_BUS_WRERR)
                printk("Bus - Write Bus Error on buffered store or cache line push\n");
-#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */
+
+       return 0;
+}
+#else
+int machine_check_generic(struct pt_regs *regs)
+{
+       unsigned long reason = get_mc_reason(regs);
+
        printk("Machine check in kernel mode.\n");
        printk("Caused by (from SRR1=%lx): ", reason);
        switch (reason & 0x601F0000) {
@@ -371,7 +375,39 @@
        default:
                printk("Unknown values in msr\n");
        }
-#endif /* CONFIG_4xx */
+       return 0;
+}
+#endif /* everything else */
+
+void machine_check_exception(struct pt_regs *regs)
+{
+       int recover = 0;
+
+       if (cur_cpu_spec->machine_check)
+               recover = cur_cpu_spec->machine_check(regs);
+       if (recover > 0)
+               return;
+
+       if (user_mode(regs)) {
+               regs->msr |= MSR_RI;
+               _exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
+               return;
+       }
+
+#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
+       /* the qspan pci read routines can cause machine checks -- Cort */
+       bad_page_fault(regs, regs->dar, SIGBUS);
+       return;
+#endif
+
+       if (debugger_fault_handler) {
+               debugger_fault_handler(regs);
+               regs->msr |= MSR_RI;
+               return;
+       }
+
+       if (check_io_access(regs))
+               return;
 
        /*
         * Optional platform-provided routine to print out
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/mm/44x_mmu.c powerpc.git/arch/ppc/mm/44x_mmu.c
--- linux-2.6.24/arch/ppc/mm/44x_mmu.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/mm/44x_mmu.c   2008-01-28 20:25:51.000000000 +0100
@@ -60,38 +60,28 @@
  * Just needed it declared someplace.
  */
 unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = 62;
+unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
 int icache_44x_need_flush;
 
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
  */
-static void __init
-ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
+static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 {
-       unsigned long attrib = 0;
-
-       __asm__ __volatile__("\
-       clrrwi  %2,%2,10\n\
-       ori     %2,%2,%4\n\
-       clrrwi  %1,%1,10\n\
-       li      %0,0\n\
-       ori     %0,%0,%5\n\
-       tlbwe   %2,%3,%6\n\
-       tlbwe   %1,%3,%7\n\
-       tlbwe   %0,%3,%8"
+       __asm__ __volatile__(
+               "tlbwe  %2,%3,%4\n"
+               "tlbwe  %1,%3,%5\n"
+               "tlbwe  %0,%3,%6\n"
        :
-       : "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
-         "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
-         "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+       : "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+         "r" (phys),
+         "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
+         "r" (tlb_44x_hwater--), /* slot for this TLB entry */
          "i" (PPC44x_TLB_PAGEID),
          "i" (PPC44x_TLB_XLAT),
          "i" (PPC44x_TLB_ATTRIB));
 }
 
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
 void __init MMU_init_hw(void)
 {
        flush_instruction_cache();
@@ -99,22 +89,13 @@
 
 unsigned long __init mmu_mapin_ram(void)
 {
-       unsigned int pinned_tlbs = 1;
-       int i;
-
-       /* Determine number of entries necessary to cover lowmem */
-       pinned_tlbs = (unsigned int)
-               (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
-
-       /* Write upper watermark to save location */
-       tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
+       unsigned long addr;
 
-       /* If necessary, set additional pinned TLBs */
-       if (pinned_tlbs > 1)
-               for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
-                       unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
-                       ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
-               }
+       /* Pin in enough TLBs to cover any lowmem not covered by the
+        * initial 256M mapping established in head_44x.S */
+       for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+            addr += PPC_PIN_SIZE)
+               ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
 
        return total_lowmem;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/platforms/85xx/mpc85xx_ads_common.c powerpc.git/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
--- linux-2.6.24/arch/ppc/platforms/85xx/mpc85xx_ads_common.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/platforms/85xx/mpc85xx_ads_common.c    2008-01-28 20:25:51.000000000 +0100
@@ -42,8 +42,6 @@
 
 #include <mm/mmu_decl.h>
 
-#include <syslib/ppc85xx_rio.h>
-
 #include <platforms/85xx/mpc85xx_ads_common.h>
 
 #ifndef CONFIG_PCI
@@ -190,6 +188,7 @@
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
 void platform_rio_init(void)
 {
        /* 512MB RIO LAW at 0xc0000000 */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/platforms/85xx/stx_gp3.c powerpc.git/arch/ppc/platforms/85xx/stx_gp3.c
--- linux-2.6.24/arch/ppc/platforms/85xx/stx_gp3.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/platforms/85xx/stx_gp3.c       2008-01-28 20:25:51.000000000 +0100
@@ -50,12 +50,10 @@
 #include <asm/irq.h>
 #include <asm/immap_85xx.h>
 #include <asm/cpm2.h>
-#include <asm/mpc85xx.h>
 #include <asm/ppc_sys.h>
 
 #include <syslib/cpm2_pic.h>
 #include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_rio.h>
 
 
 unsigned char __res[sizeof(bd_t)];
@@ -271,6 +269,7 @@
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
 void
 platform_rio_init(void)
 {
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/platforms/85xx/tqm85xx.c powerpc.git/arch/ppc/platforms/85xx/tqm85xx.c
--- linux-2.6.24/arch/ppc/platforms/85xx/tqm85xx.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/platforms/85xx/tqm85xx.c       2008-01-28 20:25:51.000000000 +0100
@@ -54,7 +54,6 @@
 #include <syslib/ppc85xx_setup.h>
 #include <syslib/cpm2_pic.h>
 #include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_rio.h>
 
 #ifndef CONFIG_PCI
 unsigned long isa_io_base = 0;
@@ -309,6 +308,7 @@
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
 void platform_rio_init(void)
 {
        /* 512MB RIO LAW at 0xc0000000 */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/platforms/ev64260.c powerpc.git/arch/ppc/platforms/ev64260.c
--- linux-2.6.24/arch/ppc/platforms/ev64260.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/platforms/ev64260.c    2008-01-28 20:25:51.000000000 +0100
@@ -336,7 +336,7 @@
 #endif
 
                if (early_serial_setup(&port) != 0)
-                       printk(KERN_WARNING "Early serial init of port 0"
+                       printk(KERN_WARNING "Early serial init of port 0 "
                                "failed\n");
 
                first_time = 0;
@@ -388,7 +388,7 @@
        ev64260_early_serial_map();
 #endif
 
-       printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc."
+       printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc. "
                "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
 
        if (ppc_md.progress)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/platforms/prep_pci.c powerpc.git/arch/ppc/platforms/prep_pci.c
--- linux-2.6.24/arch/ppc/platforms/prep_pci.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/platforms/prep_pci.c   2008-01-28 20:25:52.000000000 +0100
@@ -1099,7 +1099,6 @@
                                pci_write_config_byte(dev, 0x43, reg);
                        }
                }
-               pci_dev_put(dev);
        }
 
        if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/Makefile powerpc.git/arch/ppc/syslib/Makefile
--- linux-2.6.24/arch/ppc/syslib/Makefile       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/Makefile        2008-01-28 20:25:52.000000000 +0100
@@ -93,7 +93,6 @@
 ifeq ($(CONFIG_85xx),y)
 obj-$(CONFIG_PCI)              += pci_auto.o
 endif
-obj-$(CONFIG_RAPIDIO)          += ppc85xx_rio.o
 obj-$(CONFIG_83xx)             += ppc83xx_setup.o ppc_sys.o \
                                        mpc83xx_sys.o mpc83xx_devices.o ipic.o
 ifeq ($(CONFIG_83xx),y)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/gt64260_pic.c powerpc.git/arch/ppc/syslib/gt64260_pic.c
--- linux-2.6.24/arch/ppc/syslib/gt64260_pic.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/gt64260_pic.c   2008-01-28 20:25:52.000000000 +0100
@@ -35,7 +35,6 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
-#include <linux/stddef.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/mpc52xx_pic.c powerpc.git/arch/ppc/syslib/mpc52xx_pic.c
--- linux-2.6.24/arch/ppc/syslib/mpc52xx_pic.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/mpc52xx_pic.c   2008-01-28 20:25:52.000000000 +0100
@@ -20,7 +20,6 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
-#include <linux/stddef.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/mv64360_pic.c powerpc.git/arch/ppc/syslib/mv64360_pic.c
--- linux-2.6.24/arch/ppc/syslib/mv64360_pic.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/mv64360_pic.c   2008-01-28 20:25:52.000000000 +0100
@@ -36,7 +36,6 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
-#include <linux/stddef.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/ocp.c powerpc.git/arch/ppc/syslib/ocp.c
--- linux-2.6.24/arch/ppc/syslib/ocp.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/ocp.c   2008-01-28 20:25:52.000000000 +0100
@@ -376,7 +376,7 @@
 
        down_write(&ocp_devices_sem);
        dev = __ocp_find_device(vendor, function, index);
-       list_del((struct list_head *)dev);
+       list_del(&dev->link);
        up_write(&ocp_devices_sem);
 
        DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index));
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/ppc83xx_setup.c powerpc.git/arch/ppc/syslib/ppc83xx_setup.c
--- linux-2.6.24/arch/ppc/syslib/ppc83xx_setup.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/ppc83xx_setup.c 2008-01-28 20:25:52.000000000 +0100
@@ -41,7 +41,6 @@
 
 #include <syslib/ppc83xx_setup.h>
 #if defined(CONFIG_PCI)
-#include <asm/delay.h>
 #include <syslib/ppc83xx_pci.h>
 #endif
 
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/ppc85xx_rio.c powerpc.git/arch/ppc/syslib/ppc85xx_rio.c
--- linux-2.6.24/arch/ppc/syslib/ppc85xx_rio.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/ppc85xx_rio.c   1970-01-01 01:00:00.000000000 +0100
@@ -1,932 +0,0 @@
-/*
- * MPC85xx RapidIO support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
-
-#include <asm/io.h>
-
-#define RIO_REGS_BASE          (CCSRBAR + 0xc0000)
-#define RIO_ATMU_REGS_OFFSET   0x10c00
-#define RIO_MSG_REGS_OFFSET    0x11000
-#define RIO_MAINT_WIN_SIZE     0x400000
-#define RIO_DBELL_WIN_SIZE     0x1000
-
-#define RIO_MSG_OMR_MUI                0x00000002
-#define RIO_MSG_OSR_TE         0x00000080
-#define RIO_MSG_OSR_QOI                0x00000020
-#define RIO_MSG_OSR_QFI                0x00000010
-#define RIO_MSG_OSR_MUB                0x00000004
-#define RIO_MSG_OSR_EOMI       0x00000002
-#define RIO_MSG_OSR_QEI                0x00000001
-
-#define RIO_MSG_IMR_MI         0x00000002
-#define RIO_MSG_ISR_TE         0x00000080
-#define RIO_MSG_ISR_QFI                0x00000010
-#define RIO_MSG_ISR_DIQI       0x00000001
-
-#define RIO_MSG_DESC_SIZE      32
-#define RIO_MSG_BUFFER_SIZE    4096
-#define RIO_MIN_TX_RING_SIZE   2
-#define RIO_MAX_TX_RING_SIZE   2048
-#define RIO_MIN_RX_RING_SIZE   2
-#define RIO_MAX_RX_RING_SIZE   2048
-
-#define DOORBELL_DMR_DI                0x00000002
-#define DOORBELL_DSR_TE                0x00000080
-#define DOORBELL_DSR_QFI       0x00000010
-#define DOORBELL_DSR_DIQI      0x00000001
-#define DOORBELL_TID_OFFSET    0x03
-#define DOORBELL_SID_OFFSET    0x05
-#define DOORBELL_INFO_OFFSET   0x06
-
-#define DOORBELL_MESSAGE_SIZE  0x08
-#define DBELL_SID(x)           (*(u8 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x)           (*(u8 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x)           (*(u16 *)(x + DOORBELL_INFO_OFFSET))
-
-struct rio_atmu_regs {
-       u32 rowtar;
-       u32 pad1;
-       u32 rowbar;
-       u32 pad2;
-       u32 rowar;
-       u32 pad3[3];
-};
-
-struct rio_msg_regs {
-       u32 omr;
-       u32 osr;
-       u32 pad1;
-       u32 odqdpar;
-       u32 pad2;
-       u32 osar;
-       u32 odpr;
-       u32 odatr;
-       u32 odcr;
-       u32 pad3;
-       u32 odqepar;
-       u32 pad4[13];
-       u32 imr;
-       u32 isr;
-       u32 pad5;
-       u32 ifqdpar;
-       u32 pad6;
-       u32 ifqepar;
-       u32 pad7[250];
-       u32 dmr;
-       u32 dsr;
-       u32 pad8;
-       u32 dqdpar;
-       u32 pad9;
-       u32 dqepar;
-       u32 pad10[26];
-       u32 pwmr;
-       u32 pwsr;
-       u32 pad11;
-       u32 pwqbar;
-};
-
-struct rio_tx_desc {
-       u32 res1;
-       u32 saddr;
-       u32 dport;
-       u32 dattr;
-       u32 res2;
-       u32 res3;
-       u32 dwcnt;
-       u32 res4;
-};
-
-static u32 regs_win;
-static struct rio_atmu_regs *atmu_regs;
-static struct rio_atmu_regs *maint_atmu_regs;
-static struct rio_atmu_regs *dbell_atmu_regs;
-static u32 dbell_win;
-static u32 maint_win;
-static struct rio_msg_regs *msg_regs;
-
-static struct rio_dbell_ring {
-       void *virt;
-       dma_addr_t phys;
-} dbell_ring;
-
-static struct rio_msg_tx_ring {
-       void *virt;
-       dma_addr_t phys;
-       void *virt_buffer[RIO_MAX_TX_RING_SIZE];
-       dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
-       int tx_slot;
-       int size;
-       void *dev_id;
-} msg_tx_ring;
-
-static struct rio_msg_rx_ring {
-       void *virt;
-       dma_addr_t phys;
-       void *virt_buffer[RIO_MAX_RX_RING_SIZE];
-       int rx_slot;
-       int size;
-       void *dev_id;
-} msg_rx_ring;
-
-/**
- * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
- * @index: ID of RapidIO interface
- * @destid: Destination ID of target device
- * @data: 16-bit info field of RapidIO doorbell message
- *
- * Sends a MPC85xx doorbell message. Returns %0 on success or
- * %-EINVAL on failure.
- */
-static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
-{
-       pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
-                index, destid, data);
-       out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
-       out_be16((void *)(dbell_win), data);
-
-       return 0;
-}
-
-/**
- * mpc85xx_local_config_read - Generate a MPC85xx local config space read
- * @index: ID of RapdiIO interface
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @data: Value to be read into
- *
- * Generates a MPC85xx local configuration space read. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
-{
-       pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
-                offset);
-       *data = in_be32((void *)(regs_win + offset));
-
-       return 0;
-}
-
-/**
- * mpc85xx_local_config_write - Generate a MPC85xx local config space write
- * @index: ID of RapdiIO interface
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @data: Value to be written
- *
- * Generates a MPC85xx local configuration space write. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
-{
-       pr_debug
-           ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
-            index, offset, data);
-       out_be32((void *)(regs_win + offset), data);
-
-       return 0;
-}
-
-/**
- * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
- * @index: ID of RapdiIO interface
- * @destid: Destination ID of transaction
- * @hopcount: Number of hops to target device
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @val: Location to be read into
- *
- * Generates a MPC85xx read maintenance transaction. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int
-mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
-                       u32 * val)
-{
-       u8 *data;
-
-       pr_debug
-           ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
-            index, destid, hopcount, offset, len);
-       out_be32((void *)&maint_atmu_regs->rowtar,
-                (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
-
-       data = (u8 *) maint_win + offset;
-       switch (len) {
-       case 1:
-               *val = in_8((u8 *) data);
-               break;
-       case 2:
-               *val = in_be16((u16 *) data);
-               break;
-       default:
-               *val = in_be32((u32 *) data);
-               break;
-       }
-
-       return 0;
-}
-
-/**
- * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
- * @index: ID of RapdiIO interface
- * @destid: Destination ID of transaction
- * @hopcount: Number of hops to target device
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @val: Value to be written
- *
- * Generates an MPC85xx write maintenance transaction. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int
-mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
-                        int len, u32 val)
-{
-       u8 *data;
-       pr_debug
-           ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
-            index, destid, hopcount, offset, len, val);
-       out_be32((void *)&maint_atmu_regs->rowtar,
-                (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
-
-       data = (u8 *) maint_win + offset;
-       switch (len) {
-       case 1:
-               out_8((u8 *) data, val);
-               break;
-       case 2:
-               out_be16((u16 *) data, val);
-               break;
-       default:
-               out_be32((u32 *) data, val);
-               break;
-       }
-
-       return 0;
-}
-
-/**
- * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
- * @mport: Master port with outbound message queue
- * @rdev: Target of outbound message
- * @mbox: Outbound mailbox
- * @buffer: Message to add to outbound queue
- * @len: Length of message
- *
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-int
-rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
-                       void *buffer, size_t len)
-{
-       u32 omr;
-       struct rio_tx_desc *desc =
-           (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
-       int ret = 0;
-
-       pr_debug
-           ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n",
-            rdev->destid, mbox, (int)buffer, len);
-
-       if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
-               ret = -EINVAL;
-               goto out;
-       }
-
-       /* Copy and clear rest of buffer */
-       memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
-       if (len < (RIO_MAX_MSG_SIZE - 4))
-               memset((void *)((u32) msg_tx_ring.
-                               virt_buffer[msg_tx_ring.tx_slot] + len), 0,
-                      RIO_MAX_MSG_SIZE - len);
-
-       /* Set mbox field for message */
-       desc->dport = mbox & 0x3;
-
-       /* Enable EOMI interrupt, set priority, and set destid */
-       desc->dattr = 0x28000000 | (rdev->destid << 2);
-
-       /* Set transfer size aligned to next power of 2 (in double words) */
-       desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
-
-       /* Set snooping and source buffer address */
-       desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
-
-       /* Increment enqueue pointer */
-       omr = in_be32((void *)&msg_regs->omr);
-       out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
-
-       /* Go to next descriptor */
-       if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
-               msg_tx_ring.tx_slot = 0;
-
-      out:
-       return ret;
-}
-
-EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
-
-/**
- * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-mpc85xx_rio_tx_handler(int irq, void *dev_instance)
-{
-       int osr;
-       struct rio_mport *port = (struct rio_mport *)dev_instance;
-
-       osr = in_be32((void *)&msg_regs->osr);
-
-       if (osr & RIO_MSG_OSR_TE) {
-               pr_info("RIO: outbound message transmission error\n");
-               out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
-               goto out;
-       }
-
-       if (osr & RIO_MSG_OSR_QOI) {
-               pr_info("RIO: outbound message queue overflow\n");
-               out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
-               goto out;
-       }
-
-       if (osr & RIO_MSG_OSR_EOMI) {
-               u32 dqp = in_be32((void *)&msg_regs->odqdpar);
-               int slot = (dqp - msg_tx_ring.phys) >> 5;
-               port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
-
-               /* Ack the end-of-message interrupt */
-               out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
-       }
-
-      out:
-       return IRQ_HANDLED;
-}
-
-/**
- * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the outbound mailbox ring
- *
- * Initializes buffer ring, request the outbound message interrupt,
- * and enables the outbound message unit. Returns %0 on success and
- * %-EINVAL or %-ENOMEM on failure.
- */
-int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
-       int i, j, rc = 0;
-
-       if ((entries < RIO_MIN_TX_RING_SIZE) ||
-           (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
-               rc = -EINVAL;
-               goto out;
-       }
-
-       /* Initialize shadow copy ring */
-       msg_tx_ring.dev_id = dev_id;
-       msg_tx_ring.size = entries;
-
-       for (i = 0; i < msg_tx_ring.size; i++) {
-               if (!
-                   (msg_tx_ring.virt_buffer[i] =
-                    dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
-                                       &msg_tx_ring.phys_buffer[i],
-                                       GFP_KERNEL))) {
-                       rc = -ENOMEM;
-                       for (j = 0; j < msg_tx_ring.size; j++)
-                               if (msg_tx_ring.virt_buffer[j])
-                                       dma_free_coherent(NULL,
-                                                         RIO_MSG_BUFFER_SIZE,
-                                                         msg_tx_ring.
-                                                         virt_buffer[j],
-                                                         msg_tx_ring.
-                                                         phys_buffer[j]);
-                       goto out;
-               }
-       }
-
-       /* Initialize outbound message descriptor ring */
-       if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
-                                                   msg_tx_ring.size *
-                                                   RIO_MSG_DESC_SIZE,
-                                                   &msg_tx_ring.phys,
-                                                   GFP_KERNEL))) {
-               rc = -ENOMEM;
-               goto out_dma;
-       }
-       memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
-       msg_tx_ring.tx_slot = 0;
-
-       /* Point dequeue/enqueue pointers at first entry in ring */
-       out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
-       out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
-
-       /* Configure for snooping */
-       out_be32((void *)&msg_regs->osar, 0x00000004);
-
-       /* Clear interrupt status */
-       out_be32((void *)&msg_regs->osr, 0x000000b3);
-
-       /* Hook up outbound message handler */
-       if ((rc =
-            request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
-                        "msg_tx", (void *)mport)) < 0)
-               goto out_irq;
-
-       /*
-        * Configure outbound message unit
-        *      Snooping
-        *      Interrupts (all enabled, except QEIE)
-        *      Chaining mode
-        *      Disable
-        */
-       out_be32((void *)&msg_regs->omr, 0x00100220);
-
-       /* Set number of entries */
-       out_be32((void *)&msg_regs->omr,
-                in_be32((void *)&msg_regs->omr) |
-                ((get_bitmask_order(entries) - 2) << 12));
-
-       /* Now enable the unit */
-       out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
-
-      out:
-       return rc;
-
-      out_irq:
-       dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
-                         msg_tx_ring.virt, msg_tx_ring.phys);
-
-      out_dma:
-       for (i = 0; i < msg_tx_ring.size; i++)
-               dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
-                                 msg_tx_ring.virt_buffer[i],
-                                 msg_tx_ring.phys_buffer[i]);
-
-       return rc;
-}
-
-/**
- * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the outbound message unit, free all buffers, and
- * frees the outbound message interrupt.
- */
-void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
-{
-       /* Disable inbound message unit */
-       out_be32((void *)&msg_regs->omr, 0);
-
-       /* Free ring */
-       dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
-                         msg_tx_ring.virt, msg_tx_ring.phys);
-
-       /* Free interrupt */
-       free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
-}
-
-/**
- * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-mpc85xx_rio_rx_handler(int irq, void *dev_instance)
-{
-       int isr;
-       struct rio_mport *port = (struct rio_mport *)dev_instance;
-
-       isr = in_be32((void *)&msg_regs->isr);
-
-       if (isr & RIO_MSG_ISR_TE) {
-               pr_info("RIO: inbound message reception error\n");
-               out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
-               goto out;
-       }
-
-       /* XXX Need to check/dispatch until queue empty */
-       if (isr & RIO_MSG_ISR_DIQI) {
-               /*
-                * We implement *only* mailbox 0, but can receive messages
-                * for any mailbox/letter to that mailbox destination. So,
-                * make the callback with an unknown/invalid mailbox number
-                * argument.
-                */
-               port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
-
-               /* Ack the queueing interrupt */
-               out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
-       }
-
-      out:
-       return IRQ_HANDLED;
-}
-
-/**
- * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the inbound mailbox ring
- *
- * Initializes buffer ring, request the inbound message interrupt,
- * and enables the inbound message unit. Returns %0 on success
- * and %-EINVAL or %-ENOMEM on failure.
- */
-int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
-       int i, rc = 0;
-
-       if ((entries < RIO_MIN_RX_RING_SIZE) ||
-           (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
-               rc = -EINVAL;
-               goto out;
-       }
-
-       /* Initialize client buffer ring */
-       msg_rx_ring.dev_id = dev_id;
-       msg_rx_ring.size = entries;
-       msg_rx_ring.rx_slot = 0;
-       for (i = 0; i < msg_rx_ring.size; i++)
-               msg_rx_ring.virt_buffer[i] = NULL;
-
-       /* Initialize inbound message ring */
-       if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
-                                                   msg_rx_ring.size *
-                                                   RIO_MAX_MSG_SIZE,
-                                                   &msg_rx_ring.phys,
-                                                   GFP_KERNEL))) {
-               rc = -ENOMEM;
-               goto out;
-       }
-
-       /* Point dequeue/enqueue pointers at first entry in ring */
-       out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
-       out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
-
-       /* Clear interrupt status */
-       out_be32((void *)&msg_regs->isr, 0x00000091);
-
-       /* Hook up inbound message handler */
-       if ((rc =
-            request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
-                        "msg_rx", (void *)mport)) < 0) {
-               dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
-                                 msg_tx_ring.virt_buffer[i],
-                                 msg_tx_ring.phys_buffer[i]);
-               goto out;
-       }
-
-       /*
-        * Configure inbound message unit:
-        *      Snooping
-        *      4KB max message size
-        *      Unmask all interrupt sources
-        *      Disable
-        */
-       out_be32((void *)&msg_regs->imr, 0x001b0060);
-
-       /* Set number of queue entries */
-       out_be32((void *)&msg_regs->imr,
-                in_be32((void *)&msg_regs->imr) |
-                ((get_bitmask_order(entries) - 2) << 12));
-
-       /* Now enable the unit */
-       out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
-
-      out:
-       return rc;
-}
-
-/**
- * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the inbound message unit, free all buffers, and
- * frees the inbound message interrupt.
- */
-void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
-{
-       /* Disable inbound message unit */
-       out_be32((void *)&msg_regs->imr, 0);
-
-       /* Free ring */
-       dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
-                         msg_rx_ring.virt, msg_rx_ring.phys);
-
-       /* Free interrupt */
-       free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
-}
-
-/**
- * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- * @buf: Buffer to add to inbound queue
- *
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
-{
-       int rc = 0;
-
-       pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
-                msg_rx_ring.rx_slot);
-
-       if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
-               printk(KERN_ERR
-                      "RIO: error adding inbound buffer %d, buffer exists\n",
-                      msg_rx_ring.rx_slot);
-               rc = -EINVAL;
-               goto out;
-       }
-
-       msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
-       if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
-               msg_rx_ring.rx_slot = 0;
-
-      out:
-       return rc;
-}
-
-EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
-
-/**
- * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- *
- * Gets the next available inbound message from the inbound message queue.
- * A pointer to the message is returned on success or NULL on failure.
- */
-void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
-{
-       u32 imr;
-       u32 phys_buf, virt_buf;
-       void *buf = NULL;
-       int buf_idx;
-
-       phys_buf = in_be32((void *)&msg_regs->ifqdpar);
-
-       /* If no more messages, then bail out */
-       if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
-               goto out2;
-
-       virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
-       buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
-       buf = msg_rx_ring.virt_buffer[buf_idx];
-
-       if (!buf) {
-               printk(KERN_ERR
-                      "RIO: inbound message copy failed, no buffers\n");
-               goto out1;
-       }
-
-       /* Copy max message size, caller is expected to allocate that big */
-       memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
-
-       /* Clear the available buffer */
-       msg_rx_ring.virt_buffer[buf_idx] = NULL;
-
-      out1:
-       imr = in_be32((void *)&msg_regs->imr);
-       out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
-
-      out2:
-       return buf;
-}
-
-EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
-
-/**
- * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles doorbell interrupts. Parses a list of registered
- * doorbell event handlers and executes a matching event handler.
- */
-static irqreturn_t
-mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
-{
-       int dsr;
-       struct rio_mport *port = (struct rio_mport *)dev_instance;
-
-       dsr = in_be32((void *)&msg_regs->dsr);
-
-       if (dsr & DOORBELL_DSR_TE) {
-               pr_info("RIO: doorbell reception error\n");
-               out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
-               goto out;
-       }
-
-       if (dsr & DOORBELL_DSR_QFI) {
-               pr_info("RIO: doorbell queue full\n");
-               out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
-               goto out;
-       }
-
-       /* XXX Need to check/dispatch until queue empty */
-       if (dsr & DOORBELL_DSR_DIQI) {
-               u32 dmsg =
-                   (u32) dbell_ring.virt +
-                   (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
-               u32 dmr;
-               struct rio_dbell *dbell;
-               int found = 0;
-
-               pr_debug
-                   ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
-                    DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-
-               list_for_each_entry(dbell, &port->dbells, node) {
-                       if ((dbell->res->start <= DBELL_INF(dmsg)) &&
-                           (dbell->res->end >= DBELL_INF(dmsg))) {
-                               found = 1;
-                               break;
-                       }
-               }
-               if (found) {
-                       dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
-                                   DBELL_INF(dmsg));
-               } else {
-                       pr_debug
-                           ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
-                            DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-               }
-               dmr = in_be32((void *)&msg_regs->dmr);
-               out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
-               out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
-       }
-
-      out:
-       return IRQ_HANDLED;
-}
-
-/**
- * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
- * @mport: Master port implementing the inbound doorbell unit
- *
- * Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
-{
-       int rc = 0;
-
-       /* Map outbound doorbell window immediately after maintenance window */
-       if (!(dbell_win =
-             (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
-                           RIO_DBELL_WIN_SIZE))) {
-               printk(KERN_ERR
-                      "RIO: unable to map outbound doorbell window\n");
-               rc = -ENOMEM;
-               goto out;
-       }
-
-       /* Initialize inbound doorbells */
-       if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
-                                                  512 * DOORBELL_MESSAGE_SIZE,
-                                                  &dbell_ring.phys,
-                                                  GFP_KERNEL))) {
-               printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
-               rc = -ENOMEM;
-               iounmap((void *)dbell_win);
-               goto out;
-       }
-
-       /* Point dequeue/enqueue pointers at first entry in ring */
-       out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
-       out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
-
-       /* Clear interrupt status */
-       out_be32((void *)&msg_regs->dsr, 0x00000091);
-
-       /* Hook up doorbell handler */
-       if ((rc =
-            request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
-                        "dbell_rx", (void *)mport) < 0)) {
-               iounmap((void *)dbell_win);
-               dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
-                                 dbell_ring.virt, dbell_ring.phys);
-               printk(KERN_ERR
-                      "MPC85xx RIO: unable to request inbound doorbell irq");
-               goto out;
-       }
-
-       /* Configure doorbells for snooping, 512 entries, and enable */
-       out_be32((void *)&msg_regs->dmr, 0x00108161);
-
-      out:
-       return rc;
-}
-
-static char *cmdline = NULL;
-
-static int mpc85xx_rio_get_hdid(int index)
-{
-       /* XXX Need to parse multiple entries in some format */
-       if (!cmdline)
-               return -1;
-
-       return simple_strtol(cmdline, NULL, 0);
-}
-
-static int mpc85xx_rio_get_cmdline(char *s)
-{
-       if (!s)
-               return 0;
-
-       cmdline = s;
-       return 1;
-}
-
-__setup("riohdid=", mpc85xx_rio_get_cmdline);
-
-/**
- * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
- * @law_start: Starting physical address of RapidIO LAW
- * @law_size: Size of RapidIO LAW
- *
- * Initializes MPC85xx RapidIO hardware interface, configures
- * master port with system-specific info, and registers the
- * master port with the RapidIO subsystem.
- */
-void mpc85xx_rio_setup(int law_start, int law_size)
-{
-       struct rio_ops *ops;
-       struct rio_mport *port;
-
-       ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
-       ops->lcread = mpc85xx_local_config_read;
-       ops->lcwrite = mpc85xx_local_config_write;
-       ops->cread = mpc85xx_rio_config_read;
-       ops->cwrite = mpc85xx_rio_config_write;
-       ops->dsend = mpc85xx_rio_doorbell_send;
-
-       port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
-       port->id = 0;
-       port->index = 0;
-       INIT_LIST_HEAD(&port->dbells);
-       port->iores.start = law_start;
-       port->iores.end = law_start + law_size;
-       port->iores.flags = IORESOURCE_MEM;
-
-       rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
-       rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
-       rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
-       strcpy(port->name, "RIO0 mport");
-
-       port->ops = ops;
-       port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
-
-       rio_register_mport(port);
-
-       regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
-       atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
-       maint_atmu_regs = atmu_regs + 1;
-       dbell_atmu_regs = atmu_regs + 2;
-       msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
-
-       /* Configure maintenance transaction window */
-       out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
-       out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
-
-       maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
-
-       /* Configure outbound doorbell window */
-       out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
-       out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
-       mpc85xx_rio_doorbell_init(port);
-}
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/ppc85xx_rio.h powerpc.git/arch/ppc/syslib/ppc85xx_rio.h
--- linux-2.6.24/arch/ppc/syslib/ppc85xx_rio.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/ppc85xx_rio.h   1970-01-01 01:00:00.000000000 +0100
@@ -1,20 +0,0 @@
-/*
- * MPC85xx RapidIO definitions
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
-#define __PPC_SYSLIB_PPC85XX_RIO_H
-
-#include <linux/init.h>
-
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-
-#endif                         /* __PPC_SYSLIB_PPC85XX_RIO_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/ppc8xx_pic.c powerpc.git/arch/ppc/syslib/ppc8xx_pic.c
--- linux-2.6.24/arch/ppc/syslib/ppc8xx_pic.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/ppc8xx_pic.c    2008-01-28 20:25:52.000000000 +0100
@@ -16,7 +16,7 @@
  * the only interrupt controller.  Some boards, like the MBX and
  * Sandpoint have the 8259 as a secondary controller.  Depending
  * upon the processor type, the internal controller can have as
- * few as 16 interrups or as many as 64.  We could use  the
+ * few as 16 interrupts or as many as 64.  We could use  the
  * "clear_bit()" and "set_bit()" functions like other platforms,
  * but they are overkill for us.
  */
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/syslib/ppc_sys.c powerpc.git/arch/ppc/syslib/ppc_sys.c
--- linux-2.6.24/arch/ppc/syslib/ppc_sys.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/syslib/ppc_sys.c       2008-01-28 20:25:52.000000000 +0100
@@ -185,7 +185,7 @@
  */
 
 /*
-   Here we'll replace .name pointers with fixed-lenght strings
+   Here we'll replace .name pointers with fixed-length strings
    Hereby, this should be called *before* any func stuff triggeded.
  */
 void ppc_sys_device_initfunc(void)
diff -x .git -x .gitignore -Nur linux-2.6.24/arch/ppc/xmon/start.c powerpc.git/arch/ppc/xmon/start.c
--- linux-2.6.24/arch/ppc/xmon/start.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/arch/ppc/xmon/start.c   2008-01-28 20:25:52.000000000 +0100
@@ -10,7 +10,6 @@
 #include <linux/sysrq.h>
 #include <linux/bitops.h>
 #include <asm/xmon.h>
-#include <asm/machdep.h>
 #include <asm/errno.h>
 #include <asm/processor.h>
 #include <asm/delay.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ata/Kconfig powerpc.git/drivers/ata/Kconfig
--- linux-2.6.24/drivers/ata/Kconfig    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/ata/Kconfig     2008-01-28 20:25:59.000000000 +0100
@@ -607,13 +607,23 @@
 
 config PATA_PLATFORM
        tristate "Generic platform device PATA support"
-       depends on EMBEDDED || ARCH_RPC
+       depends on EMBEDDED || ARCH_RPC || PPC
        help
          This option enables support for generic directly connected ATA
          devices commonly found on embedded systems.
 
          If unsure, say N.
 
+config PATA_OF_PLATFORM
+       tristate "OpenFirmware platform device PATA support"
+       depends on PATA_PLATFORM && PPC_OF
+       help
+         This option enables support for generic directly connected ATA
+         devices commonly found on embedded systems with OpenFirmware
+         bindings.
+
+         If unsure, say N.
+
 config PATA_ICSIDE
        tristate "Acorn ICS PATA support"
        depends on ARM && ARCH_ACORN
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ata/Makefile powerpc.git/drivers/ata/Makefile
--- linux-2.6.24/drivers/ata/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/ata/Makefile    2008-01-28 20:25:59.000000000 +0100
@@ -67,6 +67,7 @@
 obj-$(CONFIG_PATA_SCC)         += pata_scc.o
 obj-$(CONFIG_PATA_BF54X)       += pata_bf54x.o
 obj-$(CONFIG_PATA_PLATFORM)    += pata_platform.o
+obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)      += pata_icside.o
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)                += pata_acpi.o
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ata/pata_of_platform.c powerpc.git/drivers/ata/pata_of_platform.c
--- linux-2.6.24/drivers/ata/pata_of_platform.c 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/drivers/ata/pata_of_platform.c  2008-01-28 20:25:59.000000000 +0100
@@ -0,0 +1,114 @@
+/*
+ * OF-platform PATA driver
+ *
+ * Copyright (c) 2007  MontaVista Software, Inc.
+ *                     Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pata_platform.h>
+
+static int __devinit pata_of_platform_probe(struct of_device *ofdev,
+                                           const struct of_device_id *match)
+{
+       int ret;
+       struct device_node *dn = ofdev->node;
+       struct resource io_res;
+       struct resource ctl_res;
+       struct resource irq_res;
+       unsigned int reg_shift = 0;
+       int pio_mode = 0;
+       int pio_mask;
+       const u32 *prop;
+
+       ret = of_address_to_resource(dn, 0, &io_res);
+       if (ret) {
+               dev_err(&ofdev->dev, "can't get IO address from "
+                       "device tree\n");
+               return -EINVAL;
+       }
+
+       if (of_device_is_compatible(dn, "electra-ide")) {
+               /* Altstatus is really at offset 0x3f6 from the primary window
+                * on electra-ide. Adjust ctl_res and io_res accordingly.
+                */
+               ctl_res = io_res;
+               ctl_res.start = ctl_res.start+0x3f6;
+               io_res.end = ctl_res.start-1;
+       } else {
+               ret = of_address_to_resource(dn, 1, &ctl_res);
+               if (ret) {
+                       dev_err(&ofdev->dev, "can't get CTL address from "
+                               "device tree\n");
+                       return -EINVAL;
+               }
+       }
+
+       ret = of_irq_to_resource(dn, 0, &irq_res);
+       if (ret == NO_IRQ)
+               irq_res.start = irq_res.end = -1;
+       else
+               irq_res.flags = 0;
+
+       prop = of_get_property(dn, "reg-shift", NULL);
+       if (prop)
+               reg_shift = *prop;
+
+       prop = of_get_property(dn, "pio-mode", NULL);
+       if (prop) {
+               pio_mode = *prop;
+               if (pio_mode > 6) {
+                       dev_err(&ofdev->dev, "invalid pio-mode\n");
+                       return -EINVAL;
+               }
+       } else {
+               dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n");
+       }
+
+       pio_mask = 1 << pio_mode;
+       pio_mask |= (1 << pio_mode) - 1;
+
+       return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, &irq_res,
+                                    reg_shift, pio_mask);
+}
+
+static int __devexit pata_of_platform_remove(struct of_device *ofdev)
+{
+       return __pata_platform_remove(&ofdev->dev);
+}
+
+static struct of_device_id pata_of_platform_match[] = {
+       { .compatible = "ata-generic", },
+       { .compatible = "electra-ide", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, pata_of_platform_match);
+
+static struct of_platform_driver pata_of_platform_driver = {
+       .name           = "pata_of_platform",
+       .match_table    = pata_of_platform_match,
+       .probe          = pata_of_platform_probe,
+       .remove         = __devexit_p(pata_of_platform_remove),
+};
+
+static int __init pata_of_platform_init(void)
+{
+       return of_register_platform_driver(&pata_of_platform_driver);
+}
+module_init(pata_of_platform_init);
+
+static void __exit pata_of_platform_exit(void)
+{
+       of_unregister_platform_driver(&pata_of_platform_driver);
+}
+module_exit(pata_of_platform_exit);
+
+MODULE_DESCRIPTION("OF-platform PATA driver");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ata/pata_platform.c powerpc.git/drivers/ata/pata_platform.c
--- linux-2.6.24/drivers/ata/pata_platform.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/ata/pata_platform.c     2008-01-28 20:25:59.000000000 +0100
@@ -93,14 +93,9 @@
 };
 
 static void pata_platform_setup_port(struct ata_ioports *ioaddr,
-                                    struct pata_platform_info *info)
+                                    unsigned int shift)
 {
-       unsigned int shift = 0;
-
        /* Fixup the port shift for platforms that need it */
-       if (info && info->ioport_shift)
-               shift = info->ioport_shift;
-
        ioaddr->data_addr       = ioaddr->cmd_addr + (ATA_REG_DATA    << shift);
        ioaddr->error_addr      = ioaddr->cmd_addr + (ATA_REG_ERR     << shift);
        ioaddr->feature_addr    = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
@@ -114,8 +109,13 @@
 }
 
 /**
- *     pata_platform_probe             -       attach a platform interface
- *     @pdev: platform device
+ *     __pata_platform_probe           -       attach a platform interface
+ *     @dev: device
+ *     @io_res: Resource representing I/O base
+ *     @ctl_res: Resource representing CTL base
+ *     @irq_res: Resource representing IRQ and its flags
+ *     @ioport_shift: I/O port shift
+ *     @__pio_mask: PIO mask
  *
  *     Register a platform bus IDE interface. Such interfaces are PIO and we
  *     assume do not support IRQ sharing.
@@ -135,42 +135,18 @@
  *
  *     If no IRQ resource is present, PIO polling mode is used instead.
  */
-static int __devinit pata_platform_probe(struct platform_device *pdev)
+int __devinit __pata_platform_probe(struct device *dev,
+                                   struct resource *io_res,
+                                   struct resource *ctl_res,
+                                   struct resource *irq_res,
+                                   unsigned int ioport_shift,
+                                   int __pio_mask)
 {
-       struct resource *io_res, *ctl_res;
        struct ata_host *host;
        struct ata_port *ap;
-       struct pata_platform_info *pp_info;
        unsigned int mmio;
-       int irq;
-
-       /*
-        * Simple resource validation ..
-        */
-       if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
-               dev_err(&pdev->dev, "invalid number of resources\n");
-               return -EINVAL;
-       }
-
-       /*
-        * Get the I/O base first
-        */
-       io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-       if (io_res == NULL) {
-               io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-               if (unlikely(io_res == NULL))
-                       return -EINVAL;
-       }
-
-       /*
-        * Then the CTL base
-        */
-       ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
-       if (ctl_res == NULL) {
-               ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-               if (unlikely(ctl_res == NULL))
-                       return -EINVAL;
-       }
+       int irq = 0;
+       int irq_flags = 0;
 
        /*
         * Check for MMIO
@@ -181,20 +157,21 @@
        /*
         * And the IRQ
         */
-       irq = platform_get_irq(pdev, 0);
-       if (irq < 0)
-               irq = 0;        /* no irq */
+       if (irq_res && irq_res->start > 0) {
+               irq = irq_res->start;
+               irq_flags = irq_res->flags;
+       }
 
        /*
         * Now that that's out of the way, wire up the port..
         */
-       host = ata_host_alloc(&pdev->dev, 1);
+       host = ata_host_alloc(dev, 1);
        if (!host)
                return -ENOMEM;
        ap = host->ports[0];
 
        ap->ops = &pata_platform_port_ops;
-       ap->pio_mask = pio_mask;
+       ap->pio_mask = __pio_mask;
        ap->flags |= ATA_FLAG_SLAVE_POSS;
 
        /*
@@ -209,25 +186,24 @@
         * Handle the MMIO case
         */
        if (mmio) {
-               ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
+               ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
                                io_res->end - io_res->start + 1);
-               ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+               ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
                                ctl_res->end - ctl_res->start + 1);
        } else {
-               ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
+               ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
                                io_res->end - io_res->start + 1);
-               ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
+               ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
                                ctl_res->end - ctl_res->start + 1);
        }
        if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
-               dev_err(&pdev->dev, "failed to map IO/CTL base\n");
+               dev_err(dev, "failed to map IO/CTL base\n");
                return -ENOMEM;
        }
 
        ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
 
-       pp_info = pdev->dev.platform_data;
-       pata_platform_setup_port(&ap->ioaddr, pp_info);
+       pata_platform_setup_port(&ap->ioaddr, ioport_shift);
 
        ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
                      (unsigned long long)io_res->start,
@@ -235,26 +211,78 @@
 
        /* activate */
        return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
-                                pp_info ? pp_info->irq_flags : 0,
-                                &pata_platform_sht);
+                                irq_flags, &pata_platform_sht);
 }
+EXPORT_SYMBOL_GPL(__pata_platform_probe);
 
 /**
- *     pata_platform_remove    -       unplug a platform interface
- *     @pdev: platform device
+ *     __pata_platform_remove          -       unplug a platform interface
+ *     @dev: device
  *
  *     A platform bus ATA device has been unplugged. Perform the needed
  *     cleanup. Also called on module unload for any active devices.
  */
-static int __devexit pata_platform_remove(struct platform_device *pdev)
+int __devexit __pata_platform_remove(struct device *dev)
 {
-       struct device *dev = &pdev->dev;
        struct ata_host *host = dev_get_drvdata(dev);
 
        ata_host_detach(host);
 
        return 0;
 }
+EXPORT_SYMBOL_GPL(__pata_platform_remove);
+
+static int __devinit pata_platform_probe(struct platform_device *pdev)
+{
+       struct resource *io_res;
+       struct resource *ctl_res;
+       struct resource *irq_res;
+       struct pata_platform_info *pp_info = pdev->dev.platform_data;
+
+       /*
+        * Simple resource validation ..
+        */
+       if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
+               dev_err(&pdev->dev, "invalid number of resources\n");
+               return -EINVAL;
+       }
+
+       /*
+        * Get the I/O base first
+        */
+       io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+       if (io_res == NULL) {
+               io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+               if (unlikely(io_res == NULL))
+                       return -EINVAL;
+       }
+
+       /*
+        * Then the CTL base
+        */
+       ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+       if (ctl_res == NULL) {
+               ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+               if (unlikely(ctl_res == NULL))
+                       return -EINVAL;
+       }
+
+       /*
+        * And the IRQ
+        */
+       irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       if (irq_res)
+               irq_res->flags = pp_info ? pp_info->irq_flags : 0;
+
+       return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
+                                    pp_info ? pp_info->ioport_shift : 0,
+                                    pio_mask);
+}
+
+static int __devexit pata_platform_remove(struct platform_device *pdev)
+{
+       return __pata_platform_remove(&pdev->dev);
+}
 
 static struct platform_driver pata_platform_driver = {
        .probe          = pata_platform_probe,
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/char/hw_random/Kconfig powerpc.git/drivers/char/hw_random/Kconfig
--- linux-2.6.24/drivers/char/hw_random/Kconfig 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/char/hw_random/Kconfig  2008-01-28 20:25:59.000000000 +0100
@@ -98,7 +98,7 @@
        default HW_RANDOM
        ---help---
          This driver provides kernel-side support for the Random Number
-         Generator hardware found on PA6T-1682M processor.
+         Generator hardware found on PA Semi PWRficient SoCs.
 
          To compile this driver as a module, choose M here: the
          module will be called pasemi-rng.
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/char/hw_random/pasemi-rng.c powerpc.git/drivers/char/hw_random/pasemi-rng.c
--- linux-2.6.24/drivers/char/hw_random/pasemi-rng.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/char/hw_random/pasemi-rng.c     2008-01-28 20:25:59.000000000 +0100
@@ -126,10 +126,9 @@
 }
 
 static struct of_device_id rng_match[] = {
-       {
-               .compatible      = "1682m-rng",
-       },
-       {},
+       { .compatible      = "1682m-rng", },
+       { .compatible      = "pasemi,pwrficient-rng", },
+       { },
 };
 
 static struct of_platform_driver rng_driver = {
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/edac/pasemi_edac.c powerpc.git/drivers/edac/pasemi_edac.c
--- linux-2.6.24/drivers/edac/pasemi_edac.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/edac/pasemi_edac.c      2008-01-28 20:26:00.000000000 +0100
@@ -225,7 +225,7 @@
                EDAC_FLAG_NONE;
        mci->mod_name = MODULE_NAME;
        mci->dev_name = pci_name(pdev);
-       mci->ctl_name = "pasemi,1682m-mc";
+       mci->ctl_name = "pasemi,pwrficient-mc";
        mci->edac_check = pasemi_edac_check;
        mci->ctl_page_to_phys = NULL;
        pci_read_config_dword(pdev, MCCFG_SCRUB, &scrub);
@@ -297,4 +297,4 @@
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>");
-MODULE_DESCRIPTION("MC support for PA Semi PA6T-1682M memory controller");
+MODULE_DESCRIPTION("MC support for PA Semi PWRficient memory controller");
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/macintosh/adb.c powerpc.git/drivers/macintosh/adb.c
--- linux-2.6.24/drivers/macintosh/adb.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/macintosh/adb.c 2008-01-28 20:26:08.000000000 +0100
@@ -35,6 +35,7 @@
 #include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/device.h>
+#include <linux/kthread.h>
 
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
@@ -82,21 +83,11 @@
 BLOCKING_NOTIFIER_HEAD(adb_client_list);
 static int adb_got_sleep;
 static int adb_inited;
-static pid_t adb_probe_task_pid;
 static DECLARE_MUTEX(adb_probe_mutex);
-static struct completion adb_probe_task_comp;
 static int sleepy_trackpad;
 static int autopoll_devs;
 int __adb_probe_sync;
 
-#ifdef CONFIG_PM_SLEEP
-static void adb_notify_sleep(struct pmu_sleep_notifier *self, int when);
-static struct pmu_sleep_notifier adb_sleep_notifier = {
-       adb_notify_sleep,
-       SLEEP_LEVEL_ADB,
-};
-#endif
-
 static int adb_scan_bus(void);
 static int do_adb_reset_bus(void);
 static void adbdev_init(void);
@@ -134,16 +125,6 @@
 }
 #endif
 
-
-static __inline__ void adb_wait_ms(unsigned int ms)
-{
-       if (current->pid && adb_probe_task_pid &&
-         adb_probe_task_pid == current->pid)
-               msleep(ms);
-       else
-               mdelay(ms);
-}
-
 static int adb_scan_bus(void)
 {
        int i, highFree=0, noMovement;
@@ -248,13 +229,10 @@
 static int
 adb_probe_task(void *x)
 {
-       strcpy(current->comm, "kadbprobe");
-
        printk(KERN_INFO "adb: starting probe task...\n");
        do_adb_reset_bus();
        printk(KERN_INFO "adb: finished probe task...\n");
 
-       adb_probe_task_pid = 0;
        up(&adb_probe_mutex);
 
        return 0;
@@ -263,7 +241,7 @@
 static void
 __adb_probe_task(struct work_struct *bullshit)
 {
-       adb_probe_task_pid = kernel_thread(adb_probe_task, NULL, SIGCHLD | CLONE_KERNEL);
+       kthread_run(adb_probe_task, NULL, "kadbprobe");
 }
 
 static DECLARE_WORK(adb_reset_work, __adb_probe_task);
@@ -281,6 +259,36 @@
        return 0;
 }
 
+#ifdef CONFIG_PM
+/*
+ * notify clients before sleep
+ */
+static int adb_suspend(struct platform_device *dev, pm_message_t state)
+{
+       adb_got_sleep = 1;
+       /* We need to get a lock on the probe thread */
+       down(&adb_probe_mutex);
+       /* Stop autopoll */
+       if (adb_controller->autopoll)
+               adb_controller->autopoll(0);
+       blocking_notifier_call_chain(&adb_client_list, ADB_MSG_POWERDOWN, NULL);
+
+       return 0;
+}
+
+/*
+ * reset bus after sleep
+ */
+static int adb_resume(struct platform_device *dev)
+{
+       adb_got_sleep = 0;
+       up(&adb_probe_mutex);
+       adb_reset_bus();
+
+       return 0;
+}
+#endif /* CONFIG_PM */
+
 int __init adb_init(void)
 {
        struct adb_driver *driver;
@@ -313,15 +321,12 @@
                printk(KERN_WARNING "Warning: no ADB interface detected\n");
                adb_controller = NULL;
        } else {
-#ifdef CONFIG_PM_SLEEP
-               pmu_register_sleep_notifier(&adb_sleep_notifier);
-#endif /* CONFIG_PM */
 #ifdef CONFIG_PPC
                if (machine_is_compatible("AAPL,PowerBook1998") ||
                        machine_is_compatible("PowerBook1,1"))
                        sleepy_trackpad = 1;
 #endif /* CONFIG_PPC */
-               init_completion(&adb_probe_task_comp);
+
                adbdev_init();
                adb_reset_bus();
        }
@@ -330,33 +335,6 @@
 
 __initcall(adb_init);
 
-#ifdef CONFIG_PM
-/*
- * notify clients before sleep and reset bus afterwards
- */
-void
-adb_notify_sleep(struct pmu_sleep_notifier *self, int when)
-{
-       switch (when) {
-       case PBOOK_SLEEP_REQUEST:
-               adb_got_sleep = 1;
-               /* We need to get a lock on the probe thread */
-               down(&adb_probe_mutex);
-               /* Stop autopoll */
-               if (adb_controller->autopoll)
-                       adb_controller->autopoll(0);
-               blocking_notifier_call_chain(&adb_client_list,
-                       ADB_MSG_POWERDOWN, NULL);
-               break;
-       case PBOOK_WAKE:
-               adb_got_sleep = 0;
-               up(&adb_probe_mutex);
-               adb_reset_bus();
-               break;
-       }
-}
-#endif /* CONFIG_PM */
-
 static int
 do_adb_reset_bus(void)
 {
@@ -373,7 +351,7 @@
 
        if (sleepy_trackpad) {
                /* Let the trackpad settle down */
-               adb_wait_ms(500);
+               msleep(500);
        }
 
        down(&adb_handler_sem);
@@ -389,7 +367,7 @@
 
        if (sleepy_trackpad) {
                /* Let the trackpad settle down */
-               adb_wait_ms(1500);
+               msleep(1500);
        }
 
        if (!ret) {
@@ -413,41 +391,27 @@
        adb_controller->poll();
 }
 
-static void
-adb_probe_wakeup(struct adb_request *req)
+static void adb_sync_req_done(struct adb_request *req)
 {
-       complete(&adb_probe_task_comp);
-}
+       struct completion *comp = req->arg;
 
-/* Static request used during probe */
-static struct adb_request adb_sreq;
-static unsigned long adb_sreq_lock; // Use semaphore ! */ 
+       complete(comp);
+}
 
 int
 adb_request(struct adb_request *req, void (*done)(struct adb_request *),
            int flags, int nbytes, ...)
 {
        va_list list;
-       int i, use_sreq;
+       int i;
        int rc;
+       struct completion comp;
 
        if ((adb_controller == NULL) || (adb_controller->send_request == NULL))
                return -ENXIO;
        if (nbytes < 1)
                return -EINVAL;
-       if (req == NULL && (flags & ADBREQ_NOSEND))
-               return -EINVAL;
-       
-       if (req == NULL) {
-               if (test_and_set_bit(0,&adb_sreq_lock)) {
-                       printk("adb.c: Warning: contention on static request !\n");
-                       return -EPERM;
-               }
-               req = &adb_sreq;
-               flags |= ADBREQ_SYNC;
-               use_sreq = 1;
-       } else
-               use_sreq = 0;
+
        req->nbytes = nbytes+1;
        req->done = done;
        req->reply_expected = flags & ADBREQ_REPLY;
@@ -460,25 +424,18 @@
        if (flags & ADBREQ_NOSEND)
                return 0;
 
-       /* Synchronous requests send from the probe thread cause it to
-        * block. Beware that the "done" callback will be overriden !
-        */
-       if ((flags & ADBREQ_SYNC) &&
-           (current->pid && adb_probe_task_pid &&
-           adb_probe_task_pid == current->pid)) {
-               req->done = adb_probe_wakeup;
-               rc = adb_controller->send_request(req, 0);
-               if (rc || req->complete)
-                       goto bail;
-               wait_for_completion(&adb_probe_task_comp);
-               rc = 0;
-               goto bail;
-       }
-
-       rc = adb_controller->send_request(req, flags & ADBREQ_SYNC);
-bail:
-       if (use_sreq)
-               clear_bit(0, &adb_sreq_lock);
+       /* Synchronous requests block using an on-stack completion */
+       if (flags & ADBREQ_SYNC) {
+               WARN_ON(done);
+               req->done = adb_sync_req_done;
+               req->arg = &comp;
+               init_completion(&comp);
+       }
+
+       rc = adb_controller->send_request(req, 0);
+
+       if ((flags & ADBREQ_SYNC) && !rc && !req->complete)
+               wait_for_completion(&comp);
 
        return rc;
 }
@@ -864,7 +821,29 @@
        .release        = adb_release,
 };
 
-static void
+static struct platform_driver adb_pfdrv = {
+       .driver = {
+               .name = "adb",
+       },
+#ifdef CONFIG_PM
+       .suspend = adb_suspend,
+       .resume = adb_resume,
+#endif
+};
+
+static struct platform_device adb_pfdev = {
+       .name = "adb",
+};
+
+static int __init
+adb_dummy_probe(struct platform_device *dev)
+{
+       if (dev == &adb_pfdev)
+               return 0;
+       return -ENODEV;
+}
+
+static void __init
 adbdev_init(void)
 {
        if (register_chrdev(ADB_MAJOR, "adb", &adb_fops)) {
@@ -876,4 +855,7 @@
        if (IS_ERR(adb_dev_class))
                return;
        class_device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb");
+
+       platform_device_register(&adb_pfdev);
+       platform_driver_probe(&adb_pfdrv, adb_dummy_probe);
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/macintosh/mediabay.c powerpc.git/drivers/macintosh/mediabay.c
--- linux-2.6.24/drivers/macintosh/mediabay.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/macintosh/mediabay.c    2008-01-28 20:26:08.000000000 +0100
@@ -20,6 +20,7 @@
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/ide.h>
+#include <linux/kthread.h>
 #include <asm/prom.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
@@ -35,7 +36,6 @@
 
 
 #define MB_DEBUG
-#define MB_IGNORE_SIGNALS
 
 #ifdef MB_DEBUG
 #define MBDBG(fmt, arg...)     printk(KERN_INFO fmt , ## arg)
@@ -622,12 +622,7 @@
 {
        int     i;
 
-       strcpy(current->comm, "media-bay");
-#ifdef MB_IGNORE_SIGNALS
-       sigfillset(&current->blocked);
-#endif
-
-       for (;;) {
+       while (!kthread_should_stop()) {
                for (i = 0; i < media_bay_count; ++i) {
                        down(&media_bays[i].lock);
                        if (!media_bays[i].sleeping)
@@ -636,9 +631,8 @@
                }
 
                msleep_interruptible(MB_POLL_DELAY);
-               if (signal_pending(current))
-                       return 0;
        }
+       return 0;
 }
 
 static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_device_id *match)
@@ -699,7 +693,7 @@
 
        /* Startup kernel thread */
        if (i == 0)
-               kernel_thread(media_bay_task, NULL, CLONE_KERNEL);
+               kthread_run(media_bay_task, NULL, "media-bay");
 
        return 0;
 
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/macintosh/therm_adt746x.c powerpc.git/drivers/macintosh/therm_adt746x.c
--- linux-2.6.24/drivers/macintosh/therm_adt746x.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/macintosh/therm_adt746x.c       2008-01-28 20:26:08.000000000 +0100
@@ -553,6 +553,7 @@
        struct device_node* np;
        const u32 *prop;
        int i = 0, offset = 0;
+       int err;
        
        np = of_find_node_by_name(NULL, "fan");
        if (!np)
@@ -612,17 +613,20 @@
                return -ENODEV;
        }
        
-       device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
-       device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
-       device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
-       device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
-       device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
-       device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
-       device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
-       device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
-       device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
+       err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
+       err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
+       err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
+       err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
+       err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
+       err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
+       err |= device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
+       err |= device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
+       err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
        if(therm_type == ADT7460)
-               device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
+               err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
+       if (err)
+               printk(KERN_WARNING
+                       "Failed to create tempertaure attribute file(s).\n");
 
 #ifndef CONFIG_I2C_POWERMAC
        request_module("i2c-powermac");
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/macintosh/therm_pm72.c powerpc.git/drivers/macintosh/therm_pm72.c
--- linux-2.6.24/drivers/macintosh/therm_pm72.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/macintosh/therm_pm72.c  2008-01-28 20:26:08.000000000 +0100
@@ -121,6 +121,7 @@
 #include <linux/reboot.h>
 #include <linux/kmod.h>
 #include <linux/i2c.h>
+#include <linux/kthread.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
@@ -161,7 +162,7 @@
 static int                             state;
 static int                             cpu_count;
 static int                             cpu_pid_type;
-static pid_t                           ctrl_task;
+static struct task_struct              *ctrl_task;
 static struct completion               ctrl_complete;
 static int                             critical_state;
 static int                             rackmac;
@@ -1156,6 +1157,8 @@
  */
 static int init_cpu_state(struct cpu_pid_state *state, int index)
 {
+       int err;
+
        state->index = index;
        state->first = 1;
        state->rpm = (cpu_pid_type == CPU_PID_TYPE_RACKMAC) ? 4000 : 1000;
@@ -1181,18 +1184,21 @@
        DBG("CPU %d Using %d power history entries\n", index, state->count_power);
 
        if (index == 0) {
-               device_create_file(&of_dev->dev, &dev_attr_cpu0_temperature);
-               device_create_file(&of_dev->dev, &dev_attr_cpu0_voltage);
-               device_create_file(&of_dev->dev, &dev_attr_cpu0_current);
-               device_create_file(&of_dev->dev, &dev_attr_cpu0_exhaust_fan_rpm);
-               device_create_file(&of_dev->dev, &dev_attr_cpu0_intake_fan_rpm);
+               err = device_create_file(&of_dev->dev, &dev_attr_cpu0_temperature);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu0_voltage);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu0_current);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu0_exhaust_fan_rpm);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu0_intake_fan_rpm);
        } else {
-               device_create_file(&of_dev->dev, &dev_attr_cpu1_temperature);
-               device_create_file(&of_dev->dev, &dev_attr_cpu1_voltage);
-               device_create_file(&of_dev->dev, &dev_attr_cpu1_current);
-               device_create_file(&of_dev->dev, &dev_attr_cpu1_exhaust_fan_rpm);
-               device_create_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
-       }
+               err = device_create_file(&of_dev->dev, &dev_attr_cpu1_temperature);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu1_voltage);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu1_current);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu1_exhaust_fan_rpm);
+               err |= device_create_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
+       }
+       if (err)
+               printk(KERN_WARNING "Failed to create some of the atribute"
+                       "files for CPU %d\n", index);
 
        return 0;
  fail:
@@ -1328,6 +1334,7 @@
 {
        struct device_node *u3;
        int u3h = 1; /* conservative by default */
+       int err;
 
        /*
         * There are different PID params for machines with U3 and machines
@@ -1379,8 +1386,11 @@
        if (state->monitor == NULL)
                return -ENODEV;
 
-       device_create_file(&of_dev->dev, &dev_attr_backside_temperature);
-       device_create_file(&of_dev->dev, &dev_attr_backside_fan_pwm);
+       err = device_create_file(&of_dev->dev, &dev_attr_backside_temperature);
+       err |= device_create_file(&of_dev->dev, &dev_attr_backside_fan_pwm);
+       if (err)
+               printk(KERN_WARNING "Failed to create attribute file(s)"
+                       " for backside fan\n");
 
        return 0;
 }
@@ -1491,6 +1501,8 @@
  */
 static int init_drives_state(struct drives_pid_state *state)
 {
+       int err;
+
        state->ticks = 1;
        state->first = 1;
        state->rpm = 1000;
@@ -1499,8 +1511,11 @@
        if (state->monitor == NULL)
                return -ENODEV;
 
-       device_create_file(&of_dev->dev, &dev_attr_drives_temperature);
-       device_create_file(&of_dev->dev, &dev_attr_drives_fan_rpm);
+       err = device_create_file(&of_dev->dev, &dev_attr_drives_temperature);
+       err |= device_create_file(&of_dev->dev, &dev_attr_drives_fan_rpm);
+       if (err)
+               printk(KERN_WARNING "Failed to create attribute file(s)"
+                       " for drives bay fan\n");
 
        return 0;
 }
@@ -1621,7 +1636,9 @@
        if (state->monitor == NULL)
                return -ENODEV;
 
-               device_create_file(&of_dev->dev, &dev_attr_dimms_temperature);
+       if (device_create_file(&of_dev->dev, &dev_attr_dimms_temperature))
+               printk(KERN_WARNING "Failed to create attribute file"
+                       " for DIMM temperature\n");
 
        return 0;
 }
@@ -1731,6 +1748,8 @@
  */
 static int init_slots_state(struct slots_pid_state *state)
 {
+       int err;
+
        state->ticks = 1;
        state->first = 1;
        state->pwm = 50;
@@ -1739,8 +1758,11 @@
        if (state->monitor == NULL)
                return -ENODEV;
 
-       device_create_file(&of_dev->dev, &dev_attr_slots_temperature);
-       device_create_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
+       err = device_create_file(&of_dev->dev, &dev_attr_slots_temperature);
+       err |= device_create_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
+       if (err)
+               printk(KERN_WARNING "Failed to create attribute file(s)"
+                       " for slots bay fan\n");
 
        return 0;
 }
@@ -1779,8 +1801,6 @@
  */
 static int main_control_loop(void *x)
 {
-       daemonize("kfand");
-
        DBG("main_control_loop started\n");
 
        down(&driver_lock);
@@ -1956,7 +1976,7 @@
 {
        init_completion(&ctrl_complete);
 
-       ctrl_task = kernel_thread(main_control_loop, NULL, SIGCHLD | CLONE_KERNEL);
+       ctrl_task = kthread_run(main_control_loop, NULL, "kfand");
 }
 
 /*
@@ -1964,7 +1984,7 @@
  */
 static void stop_control_loops(void)
 {
-       if (ctrl_task != 0)
+       if (ctrl_task)
                wait_for_completion(&ctrl_complete);
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/macintosh/therm_windtunnel.c powerpc.git/drivers/macintosh/therm_windtunnel.c
--- linux-2.6.24/drivers/macintosh/therm_windtunnel.c   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/macintosh/therm_windtunnel.c    2008-01-28 20:26:08.000000000 +0100
@@ -36,6 +36,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/kthread.h>
 
 #include <asm/prom.h>
 #include <asm/machdep.h>
@@ -61,8 +62,7 @@
 
 static struct {
        volatile int            running;
-       struct completion       completion;
-       pid_t                   poll_task;
+       struct task_struct      *poll_task;
        
        struct semaphore        lock;
        struct of_device        *of_dev;
@@ -223,6 +223,7 @@
 setup_hardware( void )
 {
        int val;
+       int err;
 
        /* save registers (if we unload the module) */
        x.r0 = read_reg( x.fan, 0x00, 1 );
@@ -265,8 +266,11 @@
        x.upind = -1;
        /* tune_fan( fan_up_table[x.upind].fan_setting ); */
 
-       device_create_file( &x.of_dev->dev, &dev_attr_cpu_temperature );
-       device_create_file( &x.of_dev->dev, &dev_attr_case_temperature );
+       err = device_create_file( &x.of_dev->dev, &dev_attr_cpu_temperature );
+       err |= device_create_file( &x.of_dev->dev, &dev_attr_case_temperature );
+       if (err)
+               printk(KERN_WARNING
+                       "Failed to create temperature attribute file(s).\n");
 }
 
 static void
@@ -282,27 +286,27 @@
        write_reg( x.fan, 0x00, x.r0, 1 );
 }
 
-static int
-control_loop( void *dummy )
+static int control_loop(void *dummy)
 {
-       daemonize("g4fand");
-
-       down( &x.lock );
+       down(&x.lock);
        setup_hardware();
+       up(&x.lock);
 
-       while( x.running ) {
-               up( &x.lock );
-
+       for (;;) {
                msleep_interruptible(8000);
-               
-               down( &x.lock );
+               if (kthread_should_stop())
+                       break;
+
+               down(&x.lock);
                poll_temp();
+               up(&x.lock);
        }
 
+       down(&x.lock);
        restore_regs();
-       up( &x.lock );
+       up(&x.lock);
 
-       complete_and_exit( &x.completion, 0 );
+       return 0;
 }
 
 
@@ -322,8 +326,7 @@
                ret = i2c_probe( adapter, &addr_data, &do_probe );
                if( x.thermostat && x.fan ) {
                        x.running = 1;
-                       init_completion( &x.completion );
-                       x.poll_task = kernel_thread( control_loop, NULL, SIGCHLD | CLONE_KERNEL );
+                       x.poll_task = kthread_run(control_loop, NULL, "g4fand");
                }
        }
        return ret;
@@ -339,7 +342,8 @@
        else {
                if( x.running ) {
                        x.running = 0;
-                       wait_for_completion( &x.completion );
+                       kthread_stop(x.poll_task);
+                       x.poll_task = NULL;
                }
                if( client == x.thermostat )
                        x.thermostat = NULL;
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/macintosh/via-pmu-backlight.c powerpc.git/drivers/macintosh/via-pmu-backlight.c
--- linux-2.6.24/drivers/macintosh/via-pmu-backlight.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/macintosh/via-pmu-backlight.c   2008-01-28 20:26:08.000000000 +0100
@@ -22,7 +22,7 @@
 
 static void pmu_backlight_init_curve(u8 off, u8 min, u8 max)
 {
-       unsigned int i, flat, count, range = (max - min);
+       int i, flat, count, range = (max - min);
 
        bl_curve[0] = off;
 
@@ -68,17 +68,11 @@
        return pmulevel;
 }
 
-static int pmu_backlight_update_status(struct backlight_device *bd)
+static int __pmu_backlight_update_status(struct backlight_device *bd)
 {
        struct adb_request req;
-       unsigned long flags;
        int level = bd->props.brightness;
 
-       spin_lock_irqsave(&pmu_backlight_lock, flags);
-
-       /* Don't update brightness when sleeping */
-       if (sleeping)
-               goto out;
 
        if (bd->props.power != FB_BLANK_UNBLANK ||
            bd->props.fb_blank != FB_BLANK_UNBLANK)
@@ -99,12 +93,23 @@
                pmu_wait_complete(&req);
        }
 
-out:
-       spin_unlock_irqrestore(&pmu_backlight_lock, flags);
-
        return 0;
 }
 
+static int pmu_backlight_update_status(struct backlight_device *bd)
+{
+       unsigned long flags;
+       int rc = 0;
+
+       spin_lock_irqsave(&pmu_backlight_lock, flags);
+       /* Don't update brightness when sleeping */
+       if (!sleeping)
+               rc = __pmu_backlight_update_status(bd);
+       spin_unlock_irqrestore(&pmu_backlight_lock, flags);
+       return rc;
+}
+
+
 static int pmu_backlight_get_brightness(struct backlight_device *bd)
 {
        return bd->props.brightness;
@@ -123,6 +128,16 @@
 
        spin_lock_irqsave(&pmu_backlight_lock, flags);
        sleeping = sleep;
+       if (pmac_backlight) {
+               if (sleep) {
+                       struct adb_request req;
+
+                       pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
+                                   PMU_POW_BACKLIGHT | PMU_POW_OFF);
+                       pmu_wait_complete(&req);
+               } else
+                       __pmu_backlight_update_status(pmac_backlight);
+       }
        spin_unlock_irqrestore(&pmu_backlight_lock, flags);
 }
 #endif /* CONFIG_PM */
@@ -148,8 +163,8 @@
 
        bd = backlight_device_register(name, NULL, NULL, &pmu_backlight_data);
        if (IS_ERR(bd)) {
-               printk("pmubl: Backlight registration failed\n");
-               goto error;
+               printk(KERN_ERR "PMU Backlight registration failed\n");
+               return;
        }
        bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
        pmu_backlight_init_curve(0x7F, 0x46, 0x0E);
@@ -171,10 +186,5 @@
        bd->props.power = FB_BLANK_UNBLANK;
        backlight_update_status(bd);
 
-       printk("pmubl: Backlight initialized (%s)\n", name);
-
-       return;
-
-error:
-       return;
+       printk(KERN_INFO "PMU Backlight initialized (%s)\n", name);
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/macintosh/via-pmu.c powerpc.git/drivers/macintosh/via-pmu.c
--- linux-2.6.24/drivers/macintosh/via-pmu.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/macintosh/via-pmu.c     2008-01-28 20:26:08.000000000 +0100
@@ -10,13 +10,11 @@
  *
  * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
  * Copyright (C) 2001-2002 Benjamin Herrenschmidt
+ * Copyright (C) 2006-2007 Johannes Berg
  *
  * THIS DRIVER IS BECOMING A TOTAL MESS !
  *  - Cleanup atomically disabling reply to PMU events after
  *    a sleep or a freq. switch
- *  - Move sleep code out of here to pmac_pm, merge into new
- *    common PM infrastructure
- *  - Save/Restore PCI space properly
  *
  */
 #include <stdarg.h>
@@ -33,7 +31,6 @@
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/cuda.h>
-#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/pm.h>
@@ -65,9 +62,7 @@
 #include "via-pmu-event.h"
 
 /* Some compile options */
-#undef SUSPEND_USES_PMU
-#define DEBUG_SLEEP
-#undef HACKED_PCI_SAVE
+#undef DEBUG_SLEEP
 
 /* Misc minor number allocated for /dev/pmu */
 #define PMU_MINOR              154
@@ -152,12 +147,9 @@
 static u8 pmu_intr_mask;
 static int pmu_version;
 static int drop_interrupts;
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 static int option_lid_wakeup = 1;
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
-#if (defined(CONFIG_PM_SLEEP)&&defined(CONFIG_PPC32))||defined(CONFIG_PMAC_BACKLIGHT_LEGACY)
-static int sleep_in_progress;
-#endif
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 static unsigned long async_req_locks;
 static unsigned int pmu_irq_stats[11];
 
@@ -177,7 +169,6 @@
 
 int __fake_sleep;
 int asleep;
-BLOCKING_NOTIFIER_HEAD(sleep_notifier_list);
 
 #ifdef CONFIG_ADB
 static int adb_dev_map;
@@ -224,7 +215,7 @@
 
 #ifdef DEBUG_SLEEP
 int pmu_polled_request(struct adb_request *req);
-int pmu_wink(struct adb_request *req);
+void pmu_blink(int n);
 #endif
 
 /*
@@ -875,7 +866,7 @@
 {
        char *p = page;
 
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
        if (pmu_kind == PMU_KEYLARGO_BASED &&
            pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
                p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
@@ -916,7 +907,7 @@
        *(val++) = 0;
        while(*val == ' ')
                val++;
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
        if (pmu_kind == PMU_KEYLARGO_BASED &&
            pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
                if (!strcmp(label, "lid_wakeup"))
@@ -1256,9 +1247,7 @@
 pmu_suspend(void)
 {
        unsigned long flags;
-#ifdef SUSPEND_USES_PMU
-       struct adb_request *req;
-#endif
+
        if (!via)
                return;
        
@@ -1276,17 +1265,10 @@
                via_pmu_interrupt(0, NULL);
                spin_lock_irqsave(&pmu_lock, flags);
                if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
-#ifdef SUSPEND_USES_PMU
-                       pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
-                       spin_unlock_irqrestore(&pmu_lock, flags);
-                       while(!req.complete)
-                               pmu_poll();
-#else /* SUSPEND_USES_PMU */
                        if (gpio_irq >= 0)
                                disable_irq_nosync(gpio_irq);
                        out_8(&via[IER], CB1_INT | IER_CLR);
                        spin_unlock_irqrestore(&pmu_lock, flags);
-#endif /* SUSPEND_USES_PMU */
                        break;
                }
        } while (1);
@@ -1307,18 +1289,11 @@
                return;
        }
        adb_int_pending = 1;
-#ifdef SUSPEND_USES_PMU
-       pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
-       spin_unlock_irqrestore(&pmu_lock, flags);
-       while(!req.complete)
-               pmu_poll();
-#else /* SUSPEND_USES_PMU */
        if (gpio_irq >= 0)
                enable_irq(gpio_irq);
        out_8(&via[IER], CB1_INT | IER_SET);
        spin_unlock_irqrestore(&pmu_lock, flags);
        pmu_poll();
-#endif /* SUSPEND_USES_PMU */
 }
 
 /* Interrupt data could be the result data from an ADB cmd */
@@ -1738,228 +1713,7 @@
        return via != 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-
-static LIST_HEAD(sleep_notifiers);
-
-int
-pmu_register_sleep_notifier(struct pmu_sleep_notifier *n)
-{
-       struct list_head *list;
-       struct pmu_sleep_notifier *notifier;
-
-       for (list = sleep_notifiers.next; list != &sleep_notifiers;
-            list = list->next) {
-               notifier = list_entry(list, struct pmu_sleep_notifier, list);
-               if (n->priority > notifier->priority)
-                       break;
-       }
-       __list_add(&n->list, list->prev, list);
-       return 0;
-}
-EXPORT_SYMBOL(pmu_register_sleep_notifier);
-
-int
-pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n)
-{
-       if (n->list.next == 0)
-               return -ENOENT;
-       list_del(&n->list);
-       n->list.next = NULL;
-       return 0;
-}
-EXPORT_SYMBOL(pmu_unregister_sleep_notifier);
-#endif /* CONFIG_PM_SLEEP */
-
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
-
-/* Sleep is broadcast last-to-first */
-static void broadcast_sleep(int when)
-{
-       struct list_head *list;
-       struct pmu_sleep_notifier *notifier;
-
-       for (list = sleep_notifiers.prev; list != &sleep_notifiers;
-            list = list->prev) {
-               notifier = list_entry(list, struct pmu_sleep_notifier, list);
-               notifier->notifier_call(notifier, when);
-       }
-}
-
-/* Wake is broadcast first-to-last */
-static void broadcast_wake(void)
-{
-       struct list_head *list;
-       struct pmu_sleep_notifier *notifier;
-
-       for (list = sleep_notifiers.next; list != &sleep_notifiers;
-            list = list->next) {
-               notifier = list_entry(list, struct pmu_sleep_notifier, list);
-               notifier->notifier_call(notifier, PBOOK_WAKE);
-       }
-}
-
-/*
- * This struct is used to store config register values for
- * PCI devices which may get powered off when we sleep.
- */
-static struct pci_save {
-#ifndef HACKED_PCI_SAVE
-       u16     command;
-       u16     cache_lat;
-       u16     intr;
-       u32     rom_address;
-#else
-       u32     config[16];
-#endif 
-} *pbook_pci_saves;
-static int pbook_npci_saves;
-
-static void
-pbook_alloc_pci_save(void)
-{
-       int npci;
-       struct pci_dev *pd = NULL;
-
-       npci = 0;
-       while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
-               ++npci;
-       }
-       if (npci == 0)
-               return;
-       pbook_pci_saves = (struct pci_save *)
-               kmalloc(npci * sizeof(struct pci_save), GFP_KERNEL);
-       pbook_npci_saves = npci;
-}
-
-static void
-pbook_free_pci_save(void)
-{
-       if (pbook_pci_saves == NULL)
-               return;
-       kfree(pbook_pci_saves);
-       pbook_pci_saves = NULL;
-       pbook_npci_saves = 0;
-}
-
-static void
-pbook_pci_save(void)
-{
-       struct pci_save *ps = pbook_pci_saves;
-       struct pci_dev *pd = NULL;
-       int npci = pbook_npci_saves;
-       
-       if (ps == NULL)
-               return;
-
-       while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
-               if (npci-- == 0) {
-                       pci_dev_put(pd);
-                       return;
-               }
-#ifndef HACKED_PCI_SAVE
-               pci_read_config_word(pd, PCI_COMMAND, &ps->command);
-               pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
-               pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
-               pci_read_config_dword(pd, PCI_ROM_ADDRESS, &ps->rom_address);
-#else
-               int i;
-               for (i=1;i<16;i++)
-                       pci_read_config_dword(pd, i<<4, &ps->config[i]);
-#endif
-               ++ps;
-       }
-}
-
-/* For this to work, we must take care of a few things: If gmac was enabled
- * during boot, it will be in the pci dev list. If it's disabled at this point
- * (and it will probably be), then you can't access it's config space.
- */
-static void
-pbook_pci_restore(void)
-{
-       u16 cmd;
-       struct pci_save *ps = pbook_pci_saves - 1;
-       struct pci_dev *pd = NULL;
-       int npci = pbook_npci_saves;
-       int j;
-
-       while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
-#ifdef HACKED_PCI_SAVE
-               int i;
-               if (npci-- == 0) {
-                       pci_dev_put(pd);
-                       return;
-               }
-               ps++;
-               for (i=2;i<16;i++)
-                       pci_write_config_dword(pd, i<<4, ps->config[i]);
-               pci_write_config_dword(pd, 4, ps->config[1]);
-#else
-               if (npci-- == 0)
-                       return;
-               ps++;
-               if (ps->command == 0)
-                       continue;
-               pci_read_config_word(pd, PCI_COMMAND, &cmd);
-               if ((ps->command & ~cmd) == 0)
-                       continue;
-               switch (pd->hdr_type) {
-               case PCI_HEADER_TYPE_NORMAL:
-                       for (j = 0; j < 6; ++j)
-                               pci_write_config_dword(pd,
-                                       PCI_BASE_ADDRESS_0 + j*4,
-                                       pd->resource[j].start);
-                       pci_write_config_dword(pd, PCI_ROM_ADDRESS,
-                               ps->rom_address);
-                       pci_write_config_word(pd, PCI_CACHE_LINE_SIZE,
-                               ps->cache_lat);
-                       pci_write_config_word(pd, PCI_INTERRUPT_LINE,
-                               ps->intr);
-                       pci_write_config_word(pd, PCI_COMMAND, ps->command);
-                       break;
-               }
-#endif 
-       }
-}
-
-#ifdef DEBUG_SLEEP
-/* N.B. This doesn't work on the 3400 */
-void 
-pmu_blink(int n)
-{
-       struct adb_request req;
-
-       memset(&req, 0, sizeof(req));
-
-       for (; n > 0; --n) {
-               req.nbytes = 4;
-               req.done = NULL;
-               req.data[0] = 0xee;
-               req.data[1] = 4;
-               req.data[2] = 0;
-               req.data[3] = 1;
-               req.reply[0] = ADB_RET_OK;
-               req.reply_len = 1;
-               req.reply_expected = 0;
-               pmu_polled_request(&req);
-               mdelay(50);
-               req.nbytes = 4;
-               req.done = NULL;
-               req.data[0] = 0xee;
-               req.data[1] = 4;
-               req.data[2] = 0;
-               req.data[3] = 0;
-               req.reply[0] = ADB_RET_OK;
-               req.reply_len = 1;
-               req.reply_expected = 0;
-               pmu_polled_request(&req);
-               mdelay(50);
-       }
-       mdelay(50);
-}
-#endif
-
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 /*
  * Put the powerbook to sleep.
  */
@@ -1994,134 +1748,6 @@
        out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
 }
 
-extern void pmu_backlight_set_sleep(int sleep);
-
-static int
-pmac_suspend_devices(void)
-{
-       int ret;
-
-       pm_prepare_console();
-       
-       /* Notify old-style device drivers */
-       broadcast_sleep(PBOOK_SLEEP_REQUEST);
-
-       /* Sync the disks. */
-       /* XXX It would be nice to have some way to ensure that
-        * nobody is dirtying any new buffers while we wait. That
-        * could be achieved using the refrigerator for processes
-        * that swsusp uses
-        */
-       sys_sync();
-
-       broadcast_sleep(PBOOK_SLEEP_NOW);
-
-       /* Send suspend call to devices, hold the device core's dpm_sem */
-       ret = device_suspend(PMSG_SUSPEND);
-       if (ret) {
-               broadcast_wake();
-               printk(KERN_ERR "Driver sleep failed\n");
-               return -EBUSY;
-       }
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-       /* Tell backlight code not to muck around with the chip anymore */
-       pmu_backlight_set_sleep(1);
-#endif
-
-       /* Call platform functions marked "on sleep" */
-       pmac_pfunc_i2c_suspend();
-       pmac_pfunc_base_suspend();
-
-       /* Stop preemption */
-       preempt_disable();
-
-       /* Make sure the decrementer won't interrupt us */
-       asm volatile("mtdec %0" : : "r" (0x7fffffff));
-       /* Make sure any pending DEC interrupt occurring while we did
-        * the above didn't re-enable the DEC */
-       mb();
-       asm volatile("mtdec %0" : : "r" (0x7fffffff));
-
-       /* We can now disable MSR_EE. This code of course works properly only
-        * on UP machines... For SMP, if we ever implement sleep, we'll have to
-        * stop the "other" CPUs way before we do all that stuff.
-        */
-       local_irq_disable();
-
-       /* Broadcast power down irq
-        * This isn't that useful in most cases (only directly wired devices can
-        * use this but still... This will take care of sysdev's as well, so
-        * we exit from here with local irqs disabled and PIC off.
-        */
-       ret = device_power_down(PMSG_SUSPEND);
-       if (ret) {
-               wakeup_decrementer();
-               local_irq_enable();
-               preempt_enable();
-               device_resume();
-               broadcast_wake();
-               printk(KERN_ERR "Driver powerdown failed\n");
-               return -EBUSY;
-       }
-
-       /* Wait for completion of async requests */
-       while (!batt_req.complete)
-               pmu_poll();
-
-       /* Giveup the lazy FPU & vec so we don't have to back them
-        * up from the low level code
-        */
-       enable_kernel_fp();
-
-#ifdef CONFIG_ALTIVEC
-       if (cpu_has_feature(CPU_FTR_ALTIVEC))
-               enable_kernel_altivec();
-#endif /* CONFIG_ALTIVEC */
-
-       return 0;
-}
-
-static int
-pmac_wakeup_devices(void)
-{
-       mdelay(100);
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-       /* Tell backlight code it can use the chip again */
-       pmu_backlight_set_sleep(0);
-#endif
-
-       /* Power back up system devices (including the PIC) */
-       device_power_up();
-
-       /* Force a poll of ADB interrupts */
-       adb_int_pending = 1;
-       via_pmu_interrupt(0, NULL);
-
-       /* Restart jiffies & scheduling */
-       wakeup_decrementer();
-
-       /* Re-enable local CPU interrupts */
-       local_irq_enable();
-       mdelay(10);
-       preempt_enable();
-
-       /* Call platform functions marked "on wake" */
-       pmac_pfunc_base_resume();
-       pmac_pfunc_i2c_resume();
-
-       /* Resume devices */
-       device_resume();
-
-       /* Notify old style drivers */
-       broadcast_wake();
-
-       pm_restore_console();
-
-       return 0;
-}
-
 #define        GRACKLE_PM      (1<<7)
 #define GRACKLE_DOZE   (1<<5)
 #define        GRACKLE_NAP     (1<<4)
@@ -2132,19 +1758,12 @@
        unsigned long save_l2cr;
        unsigned short pmcr1;
        struct adb_request req;
-       int ret;
        struct pci_dev *grackle;
 
        grackle = pci_get_bus_and_slot(0, 0);
        if (!grackle)
                return -ENODEV;
 
-       ret = pmac_suspend_devices();
-       if (ret) {
-               printk(KERN_ERR "Sleep rejected by devices\n");
-               return ret;
-       }
-       
        /* Turn off various things. Darwin does some retry tests here... */
        pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
        pmu_wait_complete(&req);
@@ -2207,8 +1826,6 @@
                        PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
        pmu_wait_complete(&req);
 
-       pmac_wakeup_devices();
-
        return 0;
 }
 
@@ -2218,7 +1835,6 @@
        unsigned long save_l2cr;
        unsigned long save_l3cr;
        struct adb_request req;
-       int ret;
        
        if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
                printk(KERN_ERR "Sleep mode not supported on this machine\n");
@@ -2228,12 +1844,6 @@
        if (num_online_cpus() > 1 || cpu_is_offline(0))
                return -EAGAIN;
 
-       ret = pmac_suspend_devices();
-       if (ret) {
-               printk(KERN_ERR "Sleep rejected by devices\n");
-               return ret;
-       }
-
        /* Stop environment and ADB interrupts */
        pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
        pmu_wait_complete(&req);
@@ -2304,45 +1914,33 @@
        /* Restore LPJ, cpufreq will adjust the cpu frequency */
        loops_per_jiffy /= 2;
 
-       pmac_wakeup_devices();
-
        return 0;
 }
 
 #define PB3400_MEM_CTRL                0xf8000000
 #define PB3400_MEM_CTRL_SLEEP  0x70
 
-static int
-powerbook_sleep_3400(void)
+static void __iomem *pb3400_mem_ctrl;
+
+static void powerbook_sleep_init_3400(void)
 {
-       int ret, i, x;
+       /* map in the memory controller registers */
+       pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
+       if (pb3400_mem_ctrl == NULL)
+               printk(KERN_WARNING "ioremap failed: sleep won't be possible");
+}
+
+static int powerbook_sleep_3400(void)
+{
+       int i, x;
        unsigned int hid0;
-       unsigned long p;
+       unsigned long msr;
        struct adb_request sleep_req;
-       void __iomem *mem_ctrl;
        unsigned int __iomem *mem_ctrl_sleep;
 
-       /* first map in the memory controller registers */
-       mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
-       if (mem_ctrl == NULL) {
-               printk("powerbook_sleep_3400: ioremap failed\n");
+       if (pb3400_mem_ctrl == NULL)
                return -ENOMEM;
-       }
-       mem_ctrl_sleep = mem_ctrl + PB3400_MEM_CTRL_SLEEP;
-
-       /* Allocate room for PCI save */
-       pbook_alloc_pci_save();
-
-       ret = pmac_suspend_devices();
-       if (ret) {
-               pbook_free_pci_save();
-               iounmap(mem_ctrl);
-               printk(KERN_ERR "Sleep rejected by devices\n");
-               return ret;
-       }
-
-       /* Save the state of PCI config space for some slots */
-       pbook_pci_save();
+       mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;
 
        /* Set the memory controller to keep the memory refreshed
           while we're asleep */
@@ -2357,41 +1955,34 @@
 
        /* Ask the PMU to put us to sleep */
        pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
-       while (!sleep_req.complete)
-               mb();
+       pmu_wait_complete(&sleep_req);
+       pmu_unlock();
 
-       pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
+       pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
 
-       /* displacement-flush the L2 cache - necessary? */
-       for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000)
-               i = *(volatile int *)p;
        asleep = 1;
 
        /* Put the CPU into sleep mode */
        hid0 = mfspr(SPRN_HID0);
        hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
        mtspr(SPRN_HID0, hid0);
-       mtmsr(mfmsr() | MSR_POW | MSR_EE);
-       udelay(10);
+       local_irq_enable();
+       msr = mfmsr() | MSR_POW;
+       while (asleep) {
+               mb();
+               mtmsr(msr);
+               isync();
+       }
+       local_irq_disable();
 
        /* OK, we're awake again, start restoring things */
        out_be32(mem_ctrl_sleep, 0x3f);
-       pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
-       pbook_pci_restore();
-       pmu_unlock();
-
-       /* wait for the PMU interrupt sequence to complete */
-       while (asleep)
-               mb();
-
-       pmac_wakeup_devices();
-       pbook_free_pci_save();
-       iounmap(mem_ctrl);
+       pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
 
        return 0;
 }
 
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 
 /*
  * Support for /dev/pmu device
@@ -2548,7 +2139,6 @@
        struct pmu_private *pp = file->private_data;
        unsigned long flags;
 
-       lock_kernel();
        if (pp != 0) {
                file->private_data = NULL;
                spin_lock_irqsave(&all_pvt_lock, flags);
@@ -2562,10 +2152,96 @@
 
                kfree(pp);
        }
-       unlock_kernel();
        return 0;
 }
 
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
+static void pmac_suspend_disable_irqs(void)
+{
+       /* Call platform functions marked "on sleep" */
+       pmac_pfunc_i2c_suspend();
+       pmac_pfunc_base_suspend();
+}
+
+static int powerbook_sleep(suspend_state_t state)
+{
+       int error = 0;
+
+       /* Wait for completion of async requests */
+       while (!batt_req.complete)
+               pmu_poll();
+
+       /* Giveup the lazy FPU & vec so we don't have to back them
+        * up from the low level code
+        */
+       enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+       if (cpu_has_feature(CPU_FTR_ALTIVEC))
+               enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+       switch (pmu_kind) {
+       case PMU_OHARE_BASED:
+               error = powerbook_sleep_3400();
+               break;
+       case PMU_HEATHROW_BASED:
+       case PMU_PADDINGTON_BASED:
+               error = powerbook_sleep_grackle();
+               break;
+       case PMU_KEYLARGO_BASED:
+               error = powerbook_sleep_Core99();
+               break;
+       default:
+               return -ENOSYS;
+       }
+
+       if (error)
+               return error;
+
+       mdelay(100);
+
+       return 0;
+}
+
+static void pmac_suspend_enable_irqs(void)
+{
+       /* Force a poll of ADB interrupts */
+       adb_int_pending = 1;
+       via_pmu_interrupt(0, NULL);
+
+       mdelay(10);
+
+       /* Call platform functions marked "on wake" */
+       pmac_pfunc_base_resume();
+       pmac_pfunc_i2c_resume();
+}
+
+static int pmu_sleep_valid(suspend_state_t state)
+{
+       return state == PM_SUSPEND_MEM
+               && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
+}
+
+static struct platform_suspend_ops pmu_pm_ops = {
+       .enter = powerbook_sleep,
+       .valid = pmu_sleep_valid,
+};
+
+static int register_pmu_pm_ops(void)
+{
+       if (pmu_kind == PMU_OHARE_BASED)
+               powerbook_sleep_init_3400();
+       ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs;
+       ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs;
+       suspend_set_ops(&pmu_pm_ops);
+
+       return 0;
+}
+
+device_initcall(register_pmu_pm_ops);
+#endif
+
 static int
 pmu_ioctl(struct inode * inode, struct file *filp,
                     u_int cmd, u_long arg)
@@ -2574,35 +2250,15 @@
        int error = -EINVAL;
 
        switch (cmd) {
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
        case PMU_IOC_SLEEP:
                if (!capable(CAP_SYS_ADMIN))
                        return -EACCES;
-               if (sleep_in_progress)
-                       return -EBUSY;
-               sleep_in_progress = 1;
-               switch (pmu_kind) {
-               case PMU_OHARE_BASED:
-                       error = powerbook_sleep_3400();
-                       break;
-               case PMU_HEATHROW_BASED:
-               case PMU_PADDINGTON_BASED:
-                       error = powerbook_sleep_grackle();
-                       break;
-               case PMU_KEYLARGO_BASED:
-                       error = powerbook_sleep_Core99();
-                       break;
-               default:
-                       error = -ENOSYS;
-               }
-               sleep_in_progress = 0;
-               break;
+               return pm_suspend(PM_SUSPEND_MEM);
        case PMU_IOC_CAN_SLEEP:
-               if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0)
+               if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0)
                        return put_user(0, argp);
                else
                        return put_user(1, argp);
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
 
 #ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
        /* Compatibility ioctl's for backlight */
@@ -2610,9 +2266,6 @@
        {
                int brightness;
 
-               if (sleep_in_progress)
-                       return -EBUSY;
-
                brightness = pmac_backlight_get_legacy_brightness();
                if (brightness < 0)
                        return brightness;
@@ -2624,9 +2277,6 @@
        {
                int brightness;
 
-               if (sleep_in_progress)
-                       return -EBUSY;
-
                error = get_user(brightness, argp);
                if (error)
                        return error;
@@ -2751,15 +2401,43 @@
        local_irq_restore(flags);
        return 0;
 }
-#endif /* DEBUG_SLEEP */
 
+/* N.B. This doesn't work on the 3400 */
+void pmu_blink(int n)
+{
+       struct adb_request req;
 
-/* FIXME: This is a temporary set of callbacks to enable us
- * to do suspend-to-disk.
- */
+       memset(&req, 0, sizeof(req));
 
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+       for (; n > 0; --n) {
+               req.nbytes = 4;
+               req.done = NULL;
+               req.data[0] = 0xee;
+               req.data[1] = 4;
+               req.data[2] = 0;
+               req.data[3] = 1;
+               req.reply[0] = ADB_RET_OK;
+               req.reply_len = 1;
+               req.reply_expected = 0;
+               pmu_polled_request(&req);
+               mdelay(50);
+               req.nbytes = 4;
+               req.done = NULL;
+               req.data[0] = 0xee;
+               req.data[1] = 4;
+               req.data[2] = 0;
+               req.data[3] = 0;
+               req.reply[0] = ADB_RET_OK;
+               req.reply_len = 1;
+               req.reply_expected = 0;
+               pmu_polled_request(&req);
+               mdelay(50);
+       }
+       mdelay(50);
+}
+#endif /* DEBUG_SLEEP */
 
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 int pmu_sys_suspended;
 
 static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
@@ -2767,10 +2445,15 @@
        if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended)
                return 0;
 
-       /* Suspend PMU event interrupts */
+       /* Suspend PMU event interrupts */\
        pmu_suspend();
-
        pmu_sys_suspended = 1;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+       /* Tell backlight code not to muck around with the chip anymore */
+       pmu_backlight_set_sleep(1);
+#endif
+
        return 0;
 }
 
@@ -2785,15 +2468,18 @@
        pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
        pmu_wait_complete(&req);
 
+#ifdef CONFIG_PMAC_BACKLIGHT
+       /* Tell backlight code it can use the chip again */
+       pmu_backlight_set_sleep(0);
+#endif
        /* Resume PMU event interrupts */
        pmu_resume();
-
        pmu_sys_suspended = 0;
 
        return 0;
 }
 
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 
 static struct sysdev_class pmu_sysclass = {
        set_kset_name("pmu"),
@@ -2804,10 +2490,10 @@
 };
 
 static struct sysdev_driver driver_pmu = {
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
        .suspend        = &pmu_sys_suspend,
        .resume         = &pmu_sys_resume,
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 };
 
 static int __init init_pmu_sysfs(void)
@@ -2842,10 +2528,10 @@
 EXPORT_SYMBOL(pmu_suspend);
 EXPORT_SYMBOL(pmu_resume);
 EXPORT_SYMBOL(pmu_unlock);
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 EXPORT_SYMBOL(pmu_enable_irled);
 EXPORT_SYMBOL(pmu_battery_count);
 EXPORT_SYMBOL(pmu_batteries);
 EXPORT_SYMBOL(pmu_power_flags);
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/fs_enet/fs_enet-main.c powerpc.git/drivers/net/fs_enet/fs_enet-main.c
--- linux-2.6.24/drivers/net/fs_enet/fs_enet-main.c     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/fs_enet/fs_enet-main.c      2008-01-28 20:26:12.000000000 +0100
@@ -1178,8 +1178,15 @@
        struct device_node *phynode, *mdionode;
        struct resource res;
        int ret = 0, len;
+       const u32 *data;
+
+       data  = of_get_property(np, "fixed-link", NULL);
+       if (data) {
+               snprintf(fpi->bus_id, 16, PHY_ID_FMT, 0, *data);
+               return 0;
+       }
 
-       const u32 *data = of_get_property(np, "phy-handle", &len);
+       data = of_get_property(np, "phy-handle", &len);
        if (!data || len != 4)
                return -EINVAL;
 
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/fs_enet/mac-fcc.c powerpc.git/drivers/net/fs_enet/mac-fcc.c
--- linux-2.6.24/drivers/net/fs_enet/mac-fcc.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/fs_enet/mac-fcc.c   2008-01-28 20:26:12.000000000 +0100
@@ -81,16 +81,8 @@
 static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 op)
 {
        const struct fs_platform_info *fpi = fep->fpi;
-       int i;
 
-       W32(cpmp, cp_cpcr, fpi->cp_command | op | CPM_CR_FLG);
-       for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
-               if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
-                       return 0;
-
-       printk(KERN_ERR "%s(): Not able to issue CPM command\n",
-              __FUNCTION__);
-       return 1;
+       return cpm_command(fpi->cp_command, op);
 }
 
 static int do_pd_setup(struct fs_enet_private *fep)
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/fs_enet/mac-scc.c powerpc.git/drivers/net/fs_enet/mac-scc.c
--- linux-2.6.24/drivers/net/fs_enet/mac-scc.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/fs_enet/mac-scc.c   2008-01-28 20:26:12.000000000 +0100
@@ -89,21 +89,12 @@
  * Delay to wait for SCC reset command to complete (in us)
  */
 #define SCC_RESET_DELAY                50
-#define MAX_CR_CMD_LOOPS       10000
 
 static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op)
 {
        const struct fs_platform_info *fpi = fep->fpi;
-       int i;
 
-       W16(cpmp, cp_cpcr, fpi->cp_command | CPM_CR_FLG | (op << 8));
-       for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
-               if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
-                       return 0;
-
-       printk(KERN_ERR "%s(): Not able to issue CPM command\n",
-               __FUNCTION__);
-       return 1;
+       return cpm_command(fpi->cp_command, op);
 }
 
 static int do_pd_setup(struct fs_enet_private *fep)
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/ibm_newemac/core.c powerpc.git/drivers/net/ibm_newemac/core.c
--- linux-2.6.24/drivers/net/ibm_newemac/core.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/ibm_newemac/core.c  2008-01-28 20:26:12.000000000 +0100
@@ -37,6 +37,7 @@
 #include <linux/mii.h>
 #include <linux/bitops.h>
 #include <linux/workqueue.h>
+#include <linux/of.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/phy/Kconfig powerpc.git/drivers/net/phy/Kconfig
--- linux-2.6.24/drivers/net/phy/Kconfig        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/phy/Kconfig 2008-01-28 20:26:14.000000000 +0100
@@ -61,34 +61,12 @@
          Currently supports the IP175C PHY.
 
 config FIXED_PHY
-       tristate "Drivers for PHY emulation on fixed speed/link"
+       bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
        ---help---
-         Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
-         but with the ability to manipulate the speed/link in software. The relevant MII
-         speed/duplex parameters could be effectively handled in a user-specified function.
-         Currently tested with mpc866ads.
+         Adds the platform "fixed" MDIO Bus to cover the boards that use
+         PHYs that are not connected to the real MDIO bus.
 
-config FIXED_MII_10_FDX
-       bool "Emulation for 10M Fdx fixed PHY behavior"
-       depends on FIXED_PHY
-
-config FIXED_MII_100_FDX
-       bool "Emulation for 100M Fdx fixed PHY behavior"
-       depends on FIXED_PHY
-
-config FIXED_MII_1000_FDX
-       bool "Emulation for 1000M Fdx fixed PHY behavior"
-       depends on FIXED_PHY
-
-config FIXED_MII_AMNT
-        int "Number of emulated PHYs to allocate "
-        depends on FIXED_PHY
-        default "1"
-        ---help---
-        Sometimes it is required to have several independent emulated
-        PHYs on the bus (in case of multi-eth but phy-less HW for instance).
-        This control will have specified number allocated for each fixed
-        PHY type enabled.
+         Currently tested with mpc866ads and mpc8349e-mitx.
 
 config MDIO_BITBANG
        tristate "Support for bitbanged MDIO buses"
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/phy/fixed.c powerpc.git/drivers/net/phy/fixed.c
--- linux-2.6.24/drivers/net/phy/fixed.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/phy/fixed.c 2008-01-28 20:26:14.000000000 +0100
@@ -1,362 +1,253 @@
 /*
- * drivers/net/phy/fixed.c
+ * Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
  *
- * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *         Anton Vorontsov <avorontsov@ru.mvista.com>
  *
- * Author: Vitaly Bordug
- *
- * Copyright (c) 2006 MontaVista Software, Inc.
+ * Copyright (c) 2006-2007 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
- *
  */
+
 #include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
 #include <linux/mii.h>
-#include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
 
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-
-/* we need to track the allocated pointers in order to free them on exit */
-static struct fixed_info *fixed_phy_ptrs[CONFIG_FIXED_MII_AMNT*MAX_PHY_AMNT];
-
-/*-----------------------------------------------------------------------------
- *  If something weird is required to be done with link/speed,
- * network driver is able to assign a function to implement this.
- * May be useful for PHY's that need to be software-driven.
- *-----------------------------------------------------------------------------*/
-int fixed_mdio_set_link_update(struct phy_device *phydev,
-                              int (*link_update) (struct net_device *,
-                                                  struct fixed_phy_status *))
-{
-       struct fixed_info *fixed;
-
-       if (link_update == NULL)
-               return -EINVAL;
+#define MII_REGS_NUM 29
 
-       if (phydev) {
-               if (phydev->bus) {
-                       fixed = phydev->bus->priv;
-                       fixed->link_update = link_update;
-                       return 0;
-               }
-       }
-       return -EINVAL;
-}
-
-EXPORT_SYMBOL(fixed_mdio_set_link_update);
+struct fixed_mdio_bus {
+       int irqs[PHY_MAX_ADDR];
+       struct mii_bus mii_bus;
+       struct list_head phys;
+};
 
-struct fixed_info *fixed_mdio_get_phydev (int phydev_ind)
-{
-       if (phydev_ind >= MAX_PHY_AMNT)
-               return NULL;
-       return fixed_phy_ptrs[phydev_ind];
-}
+struct fixed_phy {
+       int id;
+       u16 regs[MII_REGS_NUM];
+       struct phy_device *phydev;
+       struct fixed_phy_status status;
+       int (*link_update)(struct net_device *, struct fixed_phy_status *);
+       struct list_head node;
+};
 
-EXPORT_SYMBOL(fixed_mdio_get_phydev);
+static struct platform_device *pdev;
+static struct fixed_mdio_bus platform_fmb = {
+       .phys = LIST_HEAD_INIT(platform_fmb.phys),
+};
 
-/*-----------------------------------------------------------------------------
- *  This is used for updating internal mii regs from the status
- *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
-static int fixed_mdio_update_regs(struct fixed_info *fixed)
+static int fixed_phy_update_regs(struct fixed_phy *fp)
 {
-       u16 *regs = fixed->regs;
-       u16 bmsr = 0;
+       u16 bmsr = BMSR_ANEGCAPABLE;
        u16 bmcr = 0;
+       u16 lpagb = 0;
+       u16 lpa = 0;
 
-       if (!regs) {
-               printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
-               return -EINVAL;
-       }
-
-       if (fixed->phy_status.link)
-               bmsr |= BMSR_LSTATUS;
-
-       if (fixed->phy_status.duplex) {
+       if (fp->status.duplex) {
                bmcr |= BMCR_FULLDPLX;
 
-               switch (fixed->phy_status.speed) {
+               switch (fp->status.speed) {
+               case 1000:
+                       bmsr |= BMSR_ESTATEN;
+                       bmcr |= BMCR_SPEED1000;
+                       lpagb |= LPA_1000FULL;
+                       break;
                case 100:
                        bmsr |= BMSR_100FULL;
                        bmcr |= BMCR_SPEED100;
+                       lpa |= LPA_100FULL;
                        break;
-
                case 10:
                        bmsr |= BMSR_10FULL;
+                       lpa |= LPA_10FULL;
                        break;
+               default:
+                       printk(KERN_WARNING "fixed phy: unknown speed\n");
+                       return -EINVAL;
                }
        } else {
-               switch (fixed->phy_status.speed) {
+               switch (fp->status.speed) {
+               case 1000:
+                       bmsr |= BMSR_ESTATEN;
+                       bmcr |= BMCR_SPEED1000;
+                       lpagb |= LPA_1000HALF;
+                       break;
                case 100:
                        bmsr |= BMSR_100HALF;
                        bmcr |= BMCR_SPEED100;
+                       lpa |= LPA_100HALF;
                        break;
-
                case 10:
-                       bmsr |= BMSR_100HALF;
+                       bmsr |= BMSR_10HALF;
+                       lpa |= LPA_10HALF;
                        break;
+               default:
+                       printk(KERN_WARNING "fixed phy: unknown speed\n");
+                       return -EINVAL;
                }
        }
 
-       regs[MII_BMCR] = bmcr;
-       regs[MII_BMSR] = bmsr | 0x800;  /*we are always capable of 10 hdx */
+       if (fp->status.link)
+               bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
+
+       if (fp->status.pause)
+               lpa |= LPA_PAUSE_CAP;
+
+       if (fp->status.asym_pause)
+               lpa |= LPA_PAUSE_ASYM;
+
+       fp->regs[MII_PHYSID1] = fp->id >> 16;
+       fp->regs[MII_PHYSID2] = fp->id;
+
+       fp->regs[MII_BMSR] = bmsr;
+       fp->regs[MII_BMCR] = bmcr;
+       fp->regs[MII_LPA] = lpa;
+       fp->regs[MII_STAT1000] = lpagb;
 
        return 0;
 }
 
-static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
+static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
 {
-       struct fixed_info *fixed = bus->priv;
+       struct fixed_mdio_bus *fmb = container_of(bus, struct fixed_mdio_bus,
+                                                 mii_bus);
+       struct fixed_phy *fp;
 
-       /* if user has registered link update callback, use it */
-       if (fixed->phydev)
-               if (fixed->phydev->attached_dev) {
-                       if (fixed->link_update) {
-                               fixed->link_update(fixed->phydev->attached_dev,
-                                                  &fixed->phy_status);
-                               fixed_mdio_update_regs(fixed);
+       if (reg_num >= MII_REGS_NUM)
+               return -1;
+
+       list_for_each_entry(fp, &fmb->phys, node) {
+               if (fp->id == phy_id) {
+                       /* Issue callback if user registered it. */
+                       if (fp->link_update) {
+                               fp->link_update(fp->phydev->attached_dev,
+                                               &fp->status);
+                               fixed_phy_update_regs(fp);
                        }
+                       return fp->regs[reg_num];
                }
+       }
 
-       if ((unsigned int)location >= fixed->regs_num)
-               return -1;
-       return fixed->regs[location];
+       return 0xFFFF;
 }
 
-static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location,
-                          u16 val)
+static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
+                           u16 val)
 {
-       /* do nothing for now */
        return 0;
 }
 
-static int fixed_mii_reset(struct mii_bus *bus)
+/*
+ * If something weird is required to be done with link/speed,
+ * network driver is able to assign a function to implement this.
+ * May be useful for PHY's that need to be software-driven.
+ */
+int fixed_phy_set_link_update(struct phy_device *phydev,
+                             int (*link_update)(struct net_device *,
+                                                struct fixed_phy_status *))
 {
-       /*nothing here - no way/need to reset it */
-       return 0;
-}
-#endif
+       struct fixed_mdio_bus *fmb = &platform_fmb;
+       struct fixed_phy *fp;
 
-static int fixed_config_aneg(struct phy_device *phydev)
-{
-       /* :TODO:03/13/2006 09:45:37 PM::
-          The full autoneg funcionality can be emulated,
-          but no need to have anything here for now
-        */
-       return 0;
-}
+       if (!link_update || !phydev || !phydev->bus)
+               return -EINVAL;
 
-/*-----------------------------------------------------------------------------
- * the manual bind will do the magic - with phy_id_mask == 0
- * match will never return true...
- *-----------------------------------------------------------------------------*/
-static struct phy_driver fixed_mdio_driver = {
-       .name = "Fixed PHY",
-#ifdef CONFIG_FIXED_MII_1000_FDX
-       .features = PHY_GBIT_FEATURES,
-#else
-       .features = PHY_BASIC_FEATURES,
-#endif
-       .config_aneg = fixed_config_aneg,
-       .read_status = genphy_read_status,
-       .driver = { .owner = THIS_MODULE, },
-};
+       list_for_each_entry(fp, &fmb->phys, node) {
+               if (fp->id == phydev->phy_id) {
+                       fp->link_update = link_update;
+                       fp->phydev = phydev;
+                       return 0;
+               }
+       }
 
-static void fixed_mdio_release(struct device *dev)
-{
-       struct phy_device *phydev = container_of(dev, struct phy_device, dev);
-       struct mii_bus *bus = phydev->bus;
-       struct fixed_info *fixed = bus->priv;
-
-       kfree(phydev);
-       kfree(bus->dev);
-       kfree(bus);
-       kfree(fixed->regs);
-       kfree(fixed);
+       return -ENOENT;
 }
+EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
 
-/*-----------------------------------------------------------------------------
- *  This func is used to create all the necessary stuff, bind
- * the fixed phy driver and register all it on the mdio_bus_type.
- * speed is either 10 or 100 or 1000, duplex is boolean.
- * number is used to create multiple fixed PHYs, so that several devices can
- * utilize them simultaneously.
- *
- * The device on mdio bus will look like [bus_id]:[phy_id],
- * bus_id = number
- * phy_id = speed+duplex.
- *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
-struct fixed_info *fixed_mdio_register_device(
-       int bus_id, int speed, int duplex, u8 phy_id)
+int fixed_phy_add(unsigned int irq, int phy_id,
+                 struct fixed_phy_status *status)
 {
-       struct mii_bus *new_bus;
-       struct fixed_info *fixed;
-       struct phy_device *phydev;
-       int err;
+       int ret;
+       struct fixed_mdio_bus *fmb = &platform_fmb;
+       struct fixed_phy *fp;
 
-       struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+       fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+       if (!fp)
+               return -ENOMEM;
 
-       if (dev == NULL)
-               goto err_dev_alloc;
+       memset(fp->regs, 0xFF,  sizeof(fp->regs[0]) * MII_REGS_NUM);
 
-       new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+       fmb->irqs[phy_id] = irq;
 
-       if (new_bus == NULL)
-               goto err_bus_alloc;
-
-       fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
-
-       if (fixed == NULL)
-               goto err_fixed_alloc;
-
-       fixed->regs = kzalloc(MII_REGS_NUM * sizeof(int), GFP_KERNEL);
-       if (NULL == fixed->regs)
-               goto err_fixed_regs_alloc;
-
-       fixed->regs_num = MII_REGS_NUM;
-       fixed->phy_status.speed = speed;
-       fixed->phy_status.duplex = duplex;
-       fixed->phy_status.link = 1;
-
-       new_bus->name = "Fixed MII Bus";
-       new_bus->read = &fixed_mii_read;
-       new_bus->write = &fixed_mii_write;
-       new_bus->reset = &fixed_mii_reset;
-       /*set up workspace */
-       fixed_mdio_update_regs(fixed);
-       new_bus->priv = fixed;
-
-       new_bus->dev = dev;
-       dev_set_drvdata(dev, new_bus);
-
-       /* create phy_device and register it on the mdio bus */
-       phydev = phy_device_create(new_bus, 0, 0);
-       if (phydev == NULL)
-               goto err_phy_dev_create;
-
-       /*
-        * Put the phydev pointer into the fixed pack so that bus read/write
-        * code could be able to access for instance attached netdev. Well it
-        * doesn't have to do so, only in case of utilizing user-specified
-        * link-update...
-        */
-
-       fixed->phydev = phydev;
-       phydev->speed = speed;
-       phydev->duplex = duplex;
-
-       phydev->irq = PHY_IGNORE_INTERRUPT;
-       phydev->dev.bus = &mdio_bus_type;
-
-       snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
-                PHY_ID_FMT, bus_id, phy_id);
-
-       phydev->bus = new_bus;
-
-       phydev->dev.driver = &fixed_mdio_driver.driver;
-       phydev->dev.release = fixed_mdio_release;
-       err = phydev->dev.driver->probe(&phydev->dev);
-       if (err < 0) {
-               printk(KERN_ERR "Phy %s: problems with fixed driver\n",
-                      phydev->dev.bus_id);
-               goto err_out;
-       }
-       err = device_register(&phydev->dev);
-       if (err) {
-               printk(KERN_ERR "Phy %s failed to register\n",
-                      phydev->dev.bus_id);
-               goto err_out;
-       }
-       //phydev->state = PHY_RUNNING; /* make phy go up quick, but in 10Mbit/HDX
-       return fixed;
+       fp->id = phy_id;
+       fp->status = *status;
 
-err_out:
-       kfree(phydev);
-err_phy_dev_create:
-       kfree(fixed->regs);
-err_fixed_regs_alloc:
-       kfree(fixed);
-err_fixed_alloc:
-       kfree(new_bus);
-err_bus_alloc:
-       kfree(dev);
-err_dev_alloc:
+       ret = fixed_phy_update_regs(fp);
+       if (ret)
+               goto err_regs;
 
-       return NULL;
+       list_add_tail(&fp->node, &fmb->phys);
 
-}
-#endif
+       return 0;
 
-MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
-MODULE_AUTHOR("Vitaly Bordug");
-MODULE_LICENSE("GPL");
+err_regs:
+       kfree(fp);
+       return ret;
+}
+EXPORT_SYMBOL_GPL(fixed_phy_add);
 
-static int __init fixed_init(void)
+static int __init fixed_mdio_bus_init(void)
 {
-       int cnt = 0;
-       int i;
-/* register on the bus... Not expected to be matched
- * with anything there...
- *
- */
-       phy_driver_register(&fixed_mdio_driver);
+       struct fixed_mdio_bus *fmb = &platform_fmb;
+       int ret;
 
-/* We will create several mdio devices here, and will bound the upper
- * driver to them.
- *
- * Then the external software can lookup the phy bus by searching
- * for 0:101, to be connected to the virtual 100M Fdx phy.
- *
- * In case several virtual PHYs required, the bus_id will be in form
- * [num]:[duplex]+[speed], which make it able even to define
- * driver-specific link control callback, if for instance PHY is
- * completely SW-driven.
- */
-       for (i=1; i <= CONFIG_FIXED_MII_AMNT; i++) {
-#ifdef CONFIG_FIXED_MII_1000_FDX
-               fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(0, 1000, 1, i);
-#endif
-#ifdef CONFIG_FIXED_MII_100_FDX
-               fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(1, 100, 1, i);
-#endif
-#ifdef CONFIG_FIXED_MII_10_FDX
-               fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(2, 10, 1, i);
-#endif
+       pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
+       if (!pdev) {
+               ret = -ENOMEM;
+               goto err_pdev;
        }
 
+       fmb->mii_bus.id = 0;
+       fmb->mii_bus.name = "Fixed MDIO Bus";
+       fmb->mii_bus.dev = &pdev->dev;
+       fmb->mii_bus.read = &fixed_mdio_read;
+       fmb->mii_bus.write = &fixed_mdio_write;
+       fmb->mii_bus.irq = fmb->irqs;
+
+       ret = mdiobus_register(&fmb->mii_bus);
+       if (ret)
+               goto err_mdiobus_reg;
+
        return 0;
+
+err_mdiobus_reg:
+       platform_device_unregister(pdev);
+err_pdev:
+       return ret;
 }
+module_init(fixed_mdio_bus_init);
 
-static void __exit fixed_exit(void)
+static void __exit fixed_mdio_bus_exit(void)
 {
-       int i;
+       struct fixed_mdio_bus *fmb = &platform_fmb;
+       struct fixed_phy *fp;
 
-       phy_driver_unregister(&fixed_mdio_driver);
-       for (i=0; i < MAX_PHY_AMNT; i++)
-               if ( fixed_phy_ptrs[i] )
-                       device_unregister(&fixed_phy_ptrs[i]->phydev->dev);
+       mdiobus_unregister(&fmb->mii_bus);
+       platform_device_unregister(pdev);
+
+       list_for_each_entry(fp, &fmb->phys, node) {
+               list_del(&fp->node);
+               kfree(fp);
+       }
 }
+module_exit(fixed_mdio_bus_exit);
 
-module_init(fixed_init);
-module_exit(fixed_exit);
+MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
+MODULE_AUTHOR("Vitaly Bordug");
+MODULE_LICENSE("GPL");
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/ps3_gelic_net.c powerpc.git/drivers/net/ps3_gelic_net.c
--- linux-2.6.24/drivers/net/ps3_gelic_net.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/ps3_gelic_net.c     2008-01-28 20:26:14.000000000 +0100
@@ -58,11 +58,11 @@
 {
        return &card->dev->core;
 }
-static inline unsigned int bus_id(struct gelic_net_card *card)
+static inline u64 bus_id(struct gelic_net_card *card)
 {
        return card->dev->bus_id;
 }
-static inline unsigned int dev_id(struct gelic_net_card *card)
+static inline u64 dev_id(struct gelic_net_card *card)
 {
        return card->dev->dev_id;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/net/ucc_geth.c powerpc.git/drivers/net/ucc_geth.c
--- linux-2.6.24/drivers/net/ucc_geth.c 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/net/ucc_geth.c  2008-01-28 20:26:14.000000000 +0100
@@ -3822,6 +3822,7 @@
        int err, ucc_num, max_speed = 0;
        const phandle *ph;
        const unsigned int *prop;
+       const char *sprop;
        const void *mac_addr;
        phy_interface_t phy_interface;
        static const int enet_to_speed[] = {
@@ -3854,10 +3855,56 @@
 
        ug_info->uf_info.ucc_num = ucc_num;
 
-       prop = of_get_property(np, "rx-clock", NULL);
-       ug_info->uf_info.rx_clock = *prop;
-       prop = of_get_property(np, "tx-clock", NULL);
-       ug_info->uf_info.tx_clock = *prop;
+       sprop = of_get_property(np, "rx-clock-name", NULL);
+       if (sprop) {
+               ug_info->uf_info.rx_clock = qe_clock_source(sprop);
+               if ((ug_info->uf_info.rx_clock < QE_CLK_NONE) ||
+                   (ug_info->uf_info.rx_clock > QE_CLK24)) {
+                       printk(KERN_ERR
+                               "ucc_geth: invalid rx-clock-name property\n");
+                       return -EINVAL;
+               }
+       } else {
+               prop = of_get_property(np, "rx-clock", NULL);
+               if (!prop) {
+                       /* If both rx-clock-name and rx-clock are missing,
+                          we want to tell people to use rx-clock-name. */
+                       printk(KERN_ERR
+                               "ucc_geth: missing rx-clock-name property\n");
+                       return -EINVAL;
+               }
+               if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
+                       printk(KERN_ERR
+                               "ucc_geth: invalid rx-clock propperty\n");
+                       return -EINVAL;
+               }
+               ug_info->uf_info.rx_clock = *prop;
+       }
+
+       sprop = of_get_property(np, "tx-clock-name", NULL);
+       if (sprop) {
+               ug_info->uf_info.tx_clock = qe_clock_source(sprop);
+               if ((ug_info->uf_info.tx_clock < QE_CLK_NONE) ||
+                   (ug_info->uf_info.tx_clock > QE_CLK24)) {
+                       printk(KERN_ERR
+                               "ucc_geth: invalid tx-clock-name property\n");
+                       return -EINVAL;
+               }
+       } else {
+               prop = of_get_property(np, "rx-clock", NULL);
+               if (!prop) {
+                       printk(KERN_ERR
+                               "ucc_geth: mising tx-clock-name property\n");
+                       return -EINVAL;
+               }
+               if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
+                       printk(KERN_ERR
+                               "ucc_geth: invalid tx-clock property\n");
+                       return -EINVAL;
+               }
+               ug_info->uf_info.tx_clock = *prop;
+       }
+
        err = of_address_to_resource(np, 0, &res);
        if (err)
                return -EINVAL;
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/of/base.c powerpc.git/drivers/of/base.c
--- linux-2.6.24/drivers/of/base.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/of/base.c       2008-01-28 20:26:17.000000000 +0100
@@ -273,3 +273,61 @@
        return np;
 }
 EXPORT_SYMBOL(of_find_compatible_node);
+
+/**
+ * of_match_node - Tell if an device_node has a matching of_match structure
+ *     @matches:       array of of device match structures to search in
+ *     @node:          the of device structure to match against
+ *
+ *     Low level utility function used by device matching.
+ */
+const struct of_device_id *of_match_node(const struct of_device_id *matches,
+                                        const struct device_node *node)
+{
+       while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
+               int match = 1;
+               if (matches->name[0])
+                       match &= node->name
+                               && !strcmp(matches->name, node->name);
+               if (matches->type[0])
+                       match &= node->type
+                               && !strcmp(matches->type, node->type);
+               if (matches->compatible[0])
+                       match &= of_device_is_compatible(node,
+                                               matches->compatible);
+               if (match)
+                       return matches;
+               matches++;
+       }
+       return NULL;
+}
+EXPORT_SYMBOL(of_match_node);
+
+/**
+ *     of_find_matching_node - Find a node based on an of_device_id match
+ *                             table.
+ *     @from:          The node to start searching from or NULL, the node
+ *                     you pass will not be searched, only the next one
+ *                     will; typically, you pass what the previous call
+ *                     returned. of_node_put() will be called on it
+ *     @matches:       array of of device match structures to search in
+ *
+ *     Returns a node pointer with refcount incremented, use
+ *     of_node_put() on it when done.
+ */
+struct device_node *of_find_matching_node(struct device_node *from,
+                                         const struct of_device_id *matches)
+{
+       struct device_node *np;
+
+       read_lock(&devtree_lock);
+       np = from ? from->allnext : allnodes;
+       for (; np; np = np->allnext) {
+               if (of_match_node(matches, np) && of_node_get(np))
+                       break;
+       }
+       of_node_put(from);
+       read_unlock(&devtree_lock);
+       return np;
+}
+EXPORT_SYMBOL(of_find_matching_node);
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/of/device.c powerpc.git/drivers/of/device.c
--- linux-2.6.24/drivers/of/device.c    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/of/device.c     2008-01-28 20:26:17.000000000 +0100
@@ -10,35 +10,6 @@
 #include <asm/errno.h>
 
 /**
- * of_match_node - Tell if an device_node has a matching of_match structure
- * @ids: array of of device match structures to search in
- * @node: the of device structure to match against
- *
- * Low level utility function used by device matching.
- */
-const struct of_device_id *of_match_node(const struct of_device_id *matches,
-                                        const struct device_node *node)
-{
-       while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
-               int match = 1;
-               if (matches->name[0])
-                       match &= node->name
-                               && !strcmp(matches->name, node->name);
-               if (matches->type[0])
-                       match &= node->type
-                               && !strcmp(matches->type, node->type);
-               if (matches->compatible[0])
-                       match &= of_device_is_compatible(node,
-                                               matches->compatible);
-               if (match)
-                       return matches;
-               matches++;
-       }
-       return NULL;
-}
-EXPORT_SYMBOL(of_match_node);
-
-/**
  * of_match_device - Tell if an of_device structure has a matching
  * of_match structure
  * @ids: array of of device match structures to search in
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ps3/Makefile powerpc.git/drivers/ps3/Makefile
--- linux-2.6.24/drivers/ps3/Makefile   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/ps3/Makefile    2008-01-28 20:26:18.000000000 +0100
@@ -4,3 +4,4 @@
 obj-$(CONFIG_PPC_PS3) += sys-manager-core.o
 obj-$(CONFIG_PS3_SYS_MANAGER) += ps3-sys-manager.o
 obj-$(CONFIG_PS3_STORAGE) += ps3stor_lib.o
+obj-$(CONFIG_PS3_LPM) += ps3-lpm.o
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ps3/ps3-lpm.c powerpc.git/drivers/ps3/ps3-lpm.c
--- linux-2.6.24/drivers/ps3/ps3-lpm.c  1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/drivers/ps3/ps3-lpm.c   2008-01-28 20:26:18.000000000 +0100
@@ -0,0 +1,1248 @@
+/*
+ * PS3 Logical Performance Monitor.
+ *
+ *  Copyright (C) 2007 Sony Computer Entertainment Inc.
+ *  Copyright 2007 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <asm/ps3.h>
+#include <asm/lv1call.h>
+#include <asm/cell-pmu.h>
+
+
+/* BOOKMARK tag macros */
+#define PS3_PM_BOOKMARK_START                    0x8000000000000000ULL
+#define PS3_PM_BOOKMARK_STOP                     0x4000000000000000ULL
+#define PS3_PM_BOOKMARK_TAG_KERNEL               0x1000000000000000ULL
+#define PS3_PM_BOOKMARK_TAG_USER                 0x3000000000000000ULL
+#define PS3_PM_BOOKMARK_TAG_MASK_HI              0xF000000000000000ULL
+#define PS3_PM_BOOKMARK_TAG_MASK_LO              0x0F00000000000000ULL
+
+/* CBE PM CONTROL register macros */
+#define PS3_PM_CONTROL_PPU_TH0_BOOKMARK          0x00001000
+#define PS3_PM_CONTROL_PPU_TH1_BOOKMARK          0x00000800
+#define PS3_PM_CONTROL_PPU_COUNT_MODE_MASK       0x000C0000
+#define PS3_PM_CONTROL_PPU_COUNT_MODE_PROBLEM    0x00080000
+#define PS3_WRITE_PM_MASK                        0xFFFFFFFFFFFFFFFFULL
+
+/* CBE PM START STOP register macros */
+#define PS3_PM_START_STOP_PPU_TH0_BOOKMARK_START 0x02000000
+#define PS3_PM_START_STOP_PPU_TH1_BOOKMARK_START 0x01000000
+#define PS3_PM_START_STOP_PPU_TH0_BOOKMARK_STOP  0x00020000
+#define PS3_PM_START_STOP_PPU_TH1_BOOKMARK_STOP  0x00010000
+#define PS3_PM_START_STOP_START_MASK             0xFF000000
+#define PS3_PM_START_STOP_STOP_MASK              0x00FF0000
+
+/* CBE PM COUNTER register macres */
+#define PS3_PM_COUNTER_MASK_HI                   0xFFFFFFFF00000000ULL
+#define PS3_PM_COUNTER_MASK_LO                   0x00000000FFFFFFFFULL
+
+/* BASE SIGNAL GROUP NUMBER macros */
+#define PM_ISLAND2_BASE_SIGNAL_GROUP_NUMBER  0
+#define PM_ISLAND2_SIGNAL_GROUP_NUMBER1      6
+#define PM_ISLAND2_SIGNAL_GROUP_NUMBER2      7
+#define PM_ISLAND3_BASE_SIGNAL_GROUP_NUMBER  7
+#define PM_ISLAND4_BASE_SIGNAL_GROUP_NUMBER  15
+#define PM_SPU_TRIGGER_SIGNAL_GROUP_NUMBER   17
+#define PM_SPU_EVENT_SIGNAL_GROUP_NUMBER     18
+#define PM_ISLAND5_BASE_SIGNAL_GROUP_NUMBER  18
+#define PM_ISLAND6_BASE_SIGNAL_GROUP_NUMBER  24
+#define PM_ISLAND7_BASE_SIGNAL_GROUP_NUMBER  49
+#define PM_ISLAND8_BASE_SIGNAL_GROUP_NUMBER  52
+#define PM_SIG_GROUP_SPU                     41
+#define PM_SIG_GROUP_SPU_TRIGGER             42
+#define PM_SIG_GROUP_SPU_EVENT               43
+#define PM_SIG_GROUP_MFC_MAX                 60
+
+/**
+ * struct ps3_lpm_shadow_regs - Performance monitor shadow registers.
+ *
+ * @pm_control: Shadow of the processor's pm_control register.
+ * @pm_start_stop: Shadow of the processor's pm_start_stop register.
+ * @pm_interval: Shadow of the processor's pm_interval register.
+ * @group_control: Shadow of the processor's group_control register.
+ * @debug_bus_control: Shadow of the processor's debug_bus_control register.
+ *
+ * The logical performance monitor provides a write-only interface to
+ * these processor registers.  These shadow variables cache the processor
+ * register values for reading.
+ *
+ * The initial value of the shadow registers at lpm creation is
+ * PS3_LPM_SHADOW_REG_INIT.
+ */
+
+struct ps3_lpm_shadow_regs {
+       u64 pm_control;
+       u64 pm_start_stop;
+       u64 pm_interval;
+       u64 group_control;
+       u64 debug_bus_control;
+};
+
+#define PS3_LPM_SHADOW_REG_INIT 0xFFFFFFFF00000000ULL
+
+/**
+ * struct ps3_lpm_priv - Private lpm device data.
+ *
+ * @open: An atomic variable indicating the lpm driver has been opened.
+ * @rights: The lpm rigths granted by the system policy module.  A logical
+ *  OR of enum ps3_lpm_rights.
+ * @node_id: The node id of a BE prosessor whose performance monitor this
+ *  lpar has the right to use.
+ * @pu_id: The lv1 id of the logical PU.
+ * @lpm_id: The lv1 id of this lpm instance.
+ * @outlet_id: The outlet created by lv1 for this lpm instance.
+ * @tb_count: The number of bytes of data held in the lv1 trace buffer.
+ * @tb_cache: Kernel buffer to receive the data from the lv1 trace buffer.
+ *  Must be 128 byte aligned.
+ * @tb_cache_size: Size of the kernel @tb_cache buffer.  Must be 128 byte
+ *  aligned.
+ * @tb_cache_internal: An unaligned buffer allocated by this driver to be
+ *  used for the trace buffer cache when ps3_lpm_open() is called with a
+ *  NULL tb_cache argument.  Otherwise unused.
+ * @shadow: Processor register shadow of type struct ps3_lpm_shadow_regs.
+ * @sbd: The struct ps3_system_bus_device attached to this driver.
+ *
+ * The trace buffer is a buffer allocated and used internally to the lv1
+ * hypervisor to collect trace data.  The trace buffer cache is a guest
+ * buffer that accepts the trace data from the trace buffer.
+ */
+
+struct ps3_lpm_priv {
+       atomic_t open;
+       u64 rights;
+       u64 node_id;
+       u64 pu_id;
+       u64 lpm_id;
+       u64 outlet_id;
+       u64 tb_count;
+       void *tb_cache;
+       u64 tb_cache_size;
+       void *tb_cache_internal;
+       struct ps3_lpm_shadow_regs shadow;
+       struct ps3_system_bus_device *sbd;
+};
+
+enum {
+       PS3_LPM_DEFAULT_TB_CACHE_SIZE = 0x4000,
+};
+
+/**
+ * lpm_priv - Static instance of the lpm data.
+ *
+ * Since the exported routines don't support the notion of a device
+ * instance we need to hold the instance in this static variable
+ * and then only allow at most one instance at a time to be created.
+ */
+
+static struct ps3_lpm_priv *lpm_priv;
+
+static struct device *sbd_core(void)
+{
+       BUG_ON(!lpm_priv || !lpm_priv->sbd);
+       return &lpm_priv->sbd->core;
+}
+
+/**
+ * use_start_stop_bookmark - Enable the PPU bookmark trace.
+ *
+ * And it enables PPU bookmark triggers ONLY if the other triggers are not set.
+ * The start/stop bookmarks are inserted at ps3_enable_pm() and ps3_disable_pm()
+ * to start/stop LPM.
+ *
+ * Used to get good quality of the performance counter.
+ */
+
+enum {use_start_stop_bookmark = 1,};
+
+void ps3_set_bookmark(u64 bookmark)
+{
+       /*
+        * As per the PPE book IV, to avoid bookmark loss there must
+        * not be a traced branch within 10 cycles of setting the
+        * SPRN_BKMK register.  The actual text is unclear if 'within'
+        * includes cycles before the call.
+        */
+
+       asm volatile("or 29, 29, 29;"); /* db10cyc */
+       mtspr(SPRN_BKMK, bookmark);
+       asm volatile("or 29, 29, 29;"); /* db10cyc */
+}
+EXPORT_SYMBOL_GPL(ps3_set_bookmark);
+
+void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id)
+{
+       u64 bookmark;
+
+       bookmark = (get_tb() & 0x00000000FFFFFFFFULL) |
+               PS3_PM_BOOKMARK_TAG_KERNEL;
+       bookmark = ((tag << 56) & PS3_PM_BOOKMARK_TAG_MASK_LO) |
+               (incident << 48) | (th_id << 32) | bookmark;
+       ps3_set_bookmark(bookmark);
+}
+EXPORT_SYMBOL_GPL(ps3_set_pm_bookmark);
+
+/**
+ * ps3_read_phys_ctr - Read physical counter registers.
+ *
+ * Each physical counter can act as one 32 bit counter or as two 16 bit
+ * counters.
+ */
+
+u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr)
+{
+       int result;
+       u64 counter0415;
+       u64 counter2637;
+
+       if (phys_ctr >= NR_PHYS_CTRS) {
+               dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__,
+                       __LINE__, phys_ctr);
+               return 0;
+       }
+
+       result = lv1_set_lpm_counter(lpm_priv->lpm_id, 0, 0, 0, 0, &counter0415,
+                                    &counter2637);
+       if (result) {
+               dev_err(sbd_core(), "%s:%u: lv1_set_lpm_counter failed: "
+                       "phys_ctr %u, %s\n", __func__, __LINE__, phys_ctr,
+                       ps3_result(result));
+               return 0;
+       }
+
+       switch (phys_ctr) {
+       case 0:
+               return counter0415 >> 32;
+       case 1:
+               return counter0415 & PS3_PM_COUNTER_MASK_LO;
+       case 2:
+               return counter2637 >> 32;
+       case 3:
+               return counter2637 & PS3_PM_COUNTER_MASK_LO;
+       default:
+               BUG();
+       }
+       return 0;
+}
+EXPORT_SYMBOL_GPL(ps3_read_phys_ctr);
+
+/**
+ * ps3_write_phys_ctr - Write physical counter registers.
+ *
+ * Each physical counter can act as one 32 bit counter or as two 16 bit
+ * counters.
+ */
+
+void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val)
+{
+       u64 counter0415;
+       u64 counter0415_mask;
+       u64 counter2637;
+       u64 counter2637_mask;
+       int result;
+
+       if (phys_ctr >= NR_PHYS_CTRS) {
+               dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__,
+                       __LINE__, phys_ctr);
+               return;
+       }
+
+       switch (phys_ctr) {
+       case 0:
+               counter0415 = (u64)val << 32;
+               counter0415_mask = PS3_PM_COUNTER_MASK_HI;
+               counter2637 = 0x0;
+               counter2637_mask = 0x0;
+               break;
+       case 1:
+               counter0415 = (u64)val;
+               counter0415_mask = PS3_PM_COUNTER_MASK_LO;
+               counter2637 = 0x0;
+               counter2637_mask = 0x0;
+               break;
+       case 2:
+               counter0415 = 0x0;
+               counter0415_mask = 0x0;
+               counter2637 = (u64)val << 32;
+               counter2637_mask = PS3_PM_COUNTER_MASK_HI;
+               break;
+       case 3:
+               counter0415 = 0x0;
+               counter0415_mask = 0x0;
+               counter2637 = (u64)val;
+               counter2637_mask = PS3_PM_COUNTER_MASK_LO;
+               break;
+       default:
+               BUG();
+       }
+
+       result = lv1_set_lpm_counter(lpm_priv->lpm_id,
+                                    counter0415, counter0415_mask,
+                                    counter2637, counter2637_mask,
+                                    &counter0415, &counter2637);
+       if (result)
+               dev_err(sbd_core(), "%s:%u: lv1_set_lpm_counter failed: "
+                       "phys_ctr %u, val %u, %s\n", __func__, __LINE__,
+                       phys_ctr, val, ps3_result(result));
+}
+EXPORT_SYMBOL_GPL(ps3_write_phys_ctr);
+
+/**
+ * ps3_read_ctr - Read counter.
+ *
+ * Read 16 or 32 bits depending on the current size of the counter.
+ * Counters 4, 5, 6 & 7 are always 16 bit.
+ */
+
+u32 ps3_read_ctr(u32 cpu, u32 ctr)
+{
+       u32 val;
+       u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1);
+
+       val = ps3_read_phys_ctr(cpu, phys_ctr);
+
+       if (ps3_get_ctr_size(cpu, phys_ctr) == 16)
+               val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff);
+
+       return val;
+}
+EXPORT_SYMBOL_GPL(ps3_read_ctr);
+
+/**
+ * ps3_write_ctr - Write counter.
+ *
+ * Write 16 or 32 bits depending on the current size of the counter.
+ * Counters 4, 5, 6 & 7 are always 16 bit.
+ */
+
+void ps3_write_ctr(u32 cpu, u32 ctr, u32 val)
+{
+       u32 phys_ctr;
+       u32 phys_val;
+
+       phys_ctr = ctr & (NR_PHYS_CTRS - 1);
+
+       if (ps3_get_ctr_size(cpu, phys_ctr) == 16) {
+               phys_val = ps3_read_phys_ctr(cpu, phys_ctr);
+
+               if (ctr < NR_PHYS_CTRS)
+                       val = (val << 16) | (phys_val & 0xffff);
+               else
+                       val = (val & 0xffff) | (phys_val & 0xffff0000);
+       }
+
+       ps3_write_phys_ctr(cpu, phys_ctr, val);
+}
+EXPORT_SYMBOL_GPL(ps3_write_ctr);
+
+/**
+ * ps3_read_pm07_control - Read counter control registers.
+ *
+ * Each logical counter has a corresponding control register.
+ */
+
+u32 ps3_read_pm07_control(u32 cpu, u32 ctr)
+{
+       return 0;
+}
+EXPORT_SYMBOL_GPL(ps3_read_pm07_control);
+
+/**
+ * ps3_write_pm07_control - Write counter control registers.
+ *
+ * Each logical counter has a corresponding control register.
+ */
+
+void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val)
+{
+       int result;
+       static const u64 mask = 0xFFFFFFFFFFFFFFFFULL;
+       u64 old_value;
+
+       if (ctr >= NR_CTRS) {
+               dev_dbg(sbd_core(), "%s:%u: ctr too big: %u\n", __func__,
+                       __LINE__, ctr);
+               return;
+       }
+
+       result = lv1_set_lpm_counter_control(lpm_priv->lpm_id, ctr, val, mask,
+                                            &old_value);
+       if (result)
+               dev_err(sbd_core(), "%s:%u: lv1_set_lpm_counter_control "
+                       "failed: ctr %u, %s\n", __func__, __LINE__, ctr,
+                       ps3_result(result));
+}
+EXPORT_SYMBOL_GPL(ps3_write_pm07_control);
+
+/**
+ * ps3_read_pm - Read Other LPM control registers.
+ */
+
+u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg)
+{
+       int result = 0;
+       u64 val = 0;
+
+       switch (reg) {
+       case pm_control:
+               return lpm_priv->shadow.pm_control;
+       case trace_address:
+               return CBE_PM_TRACE_BUF_EMPTY;
+       case pm_start_stop:
+               return lpm_priv->shadow.pm_start_stop;
+       case pm_interval:
+               return lpm_priv->shadow.pm_interval;
+       case group_control:
+               return lpm_priv->shadow.group_control;
+       case debug_bus_control:
+               return lpm_priv->shadow.debug_bus_control;
+       case pm_status:
+               result = lv1_get_lpm_interrupt_status(lpm_priv->lpm_id,
+                                                     &val);
+               if (result) {
+                       val = 0;
+                       dev_dbg(sbd_core(), "%s:%u: lv1 get_lpm_status failed: "
+                               "reg %u, %s\n", __func__, __LINE__, reg,
+                               ps3_result(result));
+               }
+               return (u32)val;
+       case ext_tr_timer:
+               return 0;
+       default:
+               dev_dbg(sbd_core(), "%s:%u: unknown reg: %d\n", __func__,
+                       __LINE__, reg);
+               BUG();
+               break;
+       }
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(ps3_read_pm);
+
+/**
+ * ps3_write_pm - Write Other LPM control registers.
+ */
+
+void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val)
+{
+       int result = 0;
+       u64 dummy;
+
+       switch (reg) {
+       case group_control:
+               if (val != lpm_priv->shadow.group_control)
+                       result = lv1_set_lpm_group_control(lpm_priv->lpm_id,
+                                                          val,
+                                                          PS3_WRITE_PM_MASK,
+                                                          &dummy);
+               lpm_priv->shadow.group_control = val;
+               break;
+       case debug_bus_control:
+               if (val != lpm_priv->shadow.debug_bus_control)
+                       result = lv1_set_lpm_debug_bus_control(lpm_priv->lpm_id,
+                                                             val,
+                                                             PS3_WRITE_PM_MASK,
+                                                             &dummy);
+               lpm_priv->shadow.debug_bus_control = val;
+               break;
+       case pm_control:
+               if (use_start_stop_bookmark)
+                       val |= (PS3_PM_CONTROL_PPU_TH0_BOOKMARK |
+                               PS3_PM_CONTROL_PPU_TH1_BOOKMARK);
+               if (val != lpm_priv->shadow.pm_control)
+                       result = lv1_set_lpm_general_control(lpm_priv->lpm_id,
+                                                            val,
+                                                            PS3_WRITE_PM_MASK,
+                                                            0, 0, &dummy,
+                                                            &dummy);
+               lpm_priv->shadow.pm_control = val;
+               break;
+       case pm_interval:
+               if (val != lpm_priv->shadow.pm_interval)
+                       result = lv1_set_lpm_interval(lpm_priv->lpm_id, val,
+                                                  PS3_WRITE_PM_MASK, &dummy);
+               lpm_priv->shadow.pm_interval = val;
+               break;
+       case pm_start_stop:
+               if (val != lpm_priv->shadow.pm_start_stop)
+                       result = lv1_set_lpm_trigger_control(lpm_priv->lpm_id,
+                                                            val,
+                                                            PS3_WRITE_PM_MASK,
+                                                            &dummy);
+               lpm_priv->shadow.pm_start_stop = val;
+               break;
+       case trace_address:
+       case ext_tr_timer:
+       case pm_status:
+               break;
+       default:
+               dev_dbg(sbd_core(), "%s:%u: unknown reg: %d\n", __func__,
+                       __LINE__, reg);
+               BUG();
+               break;
+       }
+
+       if (result)
+               dev_err(sbd_core(), "%s:%u: lv1 set_control failed: "
+                       "reg %u, %s\n", __func__, __LINE__, reg,
+                       ps3_result(result));
+}
+EXPORT_SYMBOL_GPL(ps3_write_pm);
+
+/**
+ * ps3_get_ctr_size - Get the size of a physical counter.
+ *
+ * Returns either 16 or 32.
+ */
+
+u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr)
+{
+       u32 pm_ctrl;
+
+       if (phys_ctr >= NR_PHYS_CTRS) {
+               dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__,
+                       __LINE__, phys_ctr);
+               return 0;
+       }
+
+       pm_ctrl = ps3_read_pm(cpu, pm_control);
+       return (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32;
+}
+EXPORT_SYMBOL_GPL(ps3_get_ctr_size);
+
+/**
+ * ps3_set_ctr_size - Set the size of a physical counter to 16 or 32 bits.
+ */
+
+void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size)
+{
+       u32 pm_ctrl;
+
+       if (phys_ctr >= NR_PHYS_CTRS) {
+               dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__,
+                       __LINE__, phys_ctr);
+               return;
+       }
+
+       pm_ctrl = ps3_read_pm(cpu, pm_control);
+
+       switch (ctr_size) {
+       case 16:
+               pm_ctrl |= CBE_PM_16BIT_CTR(phys_ctr);
+               ps3_write_pm(cpu, pm_control, pm_ctrl);
+               break;
+
+       case 32:
+               pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr);
+               ps3_write_pm(cpu, pm_control, pm_ctrl);
+               break;
+       default:
+               BUG();
+       }
+}
+EXPORT_SYMBOL_GPL(ps3_set_ctr_size);
+
+static u64 pm_translate_signal_group_number_on_island2(u64 subgroup)
+{
+
+       if (subgroup == 2)
+               subgroup = 3;
+
+       if (subgroup <= 6)
+               return PM_ISLAND2_BASE_SIGNAL_GROUP_NUMBER + subgroup;
+       else if (subgroup == 7)
+               return PM_ISLAND2_SIGNAL_GROUP_NUMBER1;
+       else
+               return PM_ISLAND2_SIGNAL_GROUP_NUMBER2;
+}
+
+static u64 pm_translate_signal_group_number_on_island3(u64 subgroup)
+{
+
+       switch (subgroup) {
+       case 2:
+       case 3:
+       case 4:
+               subgroup += 2;
+               break;
+       case 5:
+               subgroup = 8;
+               break;
+       default:
+               break;
+       }
+       return PM_ISLAND3_BASE_SIGNAL_GROUP_NUMBER + subgroup;
+}
+
+static u64 pm_translate_signal_group_number_on_island4(u64 subgroup)
+{
+       return PM_ISLAND4_BASE_SIGNAL_GROUP_NUMBER + subgroup;
+}
+
+static u64 pm_translate_signal_group_number_on_island5(u64 subgroup)
+{
+
+       switch (subgroup) {
+       case 3:
+               subgroup = 4;
+               break;
+       case 4:
+               subgroup = 6;
+               break;
+       default:
+               break;
+       }
+       return PM_ISLAND5_BASE_SIGNAL_GROUP_NUMBER + subgroup;
+}
+
+static u64 pm_translate_signal_group_number_on_island6(u64 subgroup,
+                                                      u64 subsubgroup)
+{
+       switch (subgroup) {
+       case 3:
+       case 4:
+       case 5:
+               subgroup += 1;
+               break;
+       default:
+               break;
+       }
+
+       switch (subsubgroup) {
+       case 4:
+       case 5:
+       case 6:
+               subsubgroup += 2;
+               break;
+       case 7:
+       case 8:
+       case 9:
+       case 10:
+               subsubgroup += 4;
+               break;
+       case 11:
+       case 12:
+       case 13:
+               subsubgroup += 5;
+               break;
+       default:
+               break;
+       }
+
+       if (subgroup <= 5)
+               return (PM_ISLAND6_BASE_SIGNAL_GROUP_NUMBER + subgroup);
+       else
+               return (PM_ISLAND6_BASE_SIGNAL_GROUP_NUMBER + subgroup
+                       + subsubgroup - 1);
+}
+
+static u64 pm_translate_signal_group_number_on_island7(u64 subgroup)
+{
+       return PM_ISLAND7_BASE_SIGNAL_GROUP_NUMBER + subgroup;
+}
+
+static u64 pm_translate_signal_group_number_on_island8(u64 subgroup)
+{
+       return PM_ISLAND8_BASE_SIGNAL_GROUP_NUMBER + subgroup;
+}
+
+static u64 pm_signal_group_to_ps3_lv1_signal_group(u64 group)
+{
+       u64 island;
+       u64 subgroup;
+       u64 subsubgroup;
+
+       subgroup = 0;
+       subsubgroup = 0;
+       island = 0;
+       if (group < 1000) {
+               if (group < 100) {
+                       if (20 <= group && group < 30) {
+                               island = 2;
+                               subgroup = group - 20;
+                       } else if (30 <= group && group < 40) {
+                               island = 3;
+                               subgroup = group - 30;
+                       } else if (40 <= group && group < 50) {
+                               island = 4;
+                               subgroup = group - 40;
+                       } else if (50 <= group && group < 60) {
+                               island = 5;
+                               subgroup = group - 50;
+                       } else if (60 <= group && group < 70) {
+                               island = 6;
+                               subgroup = group - 60;
+                       } else if (70 <= group && group < 80) {
+                               island = 7;
+                               subgroup = group - 70;
+                       } else if (80 <= group && group < 90) {
+                               island = 8;
+                               subgroup = group - 80;
+                       }
+               } else if (200 <= group && group < 300) {
+                       island = 2;
+                       subgroup = group - 200;
+               } else if (600 <= group && group < 700) {
+                       island = 6;
+                       subgroup = 5;
+                       subsubgroup = group - 650;
+               }
+       } else if (6000 <= group && group < 7000) {
+               island = 6;
+               subgroup = 5;
+               subsubgroup = group - 6500;
+       }
+
+       switch (island) {
+       case 2:
+               return pm_translate_signal_group_number_on_island2(subgroup);
+       case 3:
+               return pm_translate_signal_group_number_on_island3(subgroup);
+       case 4:
+               return pm_translate_signal_group_number_on_island4(subgroup);
+       case 5:
+               return pm_translate_signal_group_number_on_island5(subgroup);
+       case 6:
+               return pm_translate_signal_group_number_on_island6(subgroup,
+                                                                  subsubgroup);
+       case 7:
+               return pm_translate_signal_group_number_on_island7(subgroup);
+       case 8:
+               return pm_translate_signal_group_number_on_island8(subgroup);
+       default:
+               dev_dbg(sbd_core(), "%s:%u: island not found: %lu\n", __func__,
+                       __LINE__, group);
+               BUG();
+               break;
+       }
+       return 0;
+}
+
+static u64 pm_bus_word_to_ps3_lv1_bus_word(u8 word)
+{
+
+       switch (word) {
+       case 1:
+               return 0xF000;
+       case 2:
+               return 0x0F00;
+       case 4:
+               return 0x00F0;
+       case 8:
+       default:
+               return 0x000F;
+       }
+}
+
+static int __ps3_set_signal(u64 lv1_signal_group, u64 bus_select,
+                           u64 signal_select, u64 attr1, u64 attr2, u64 attr3)
+{
+       int ret;
+
+       ret = lv1_set_lpm_signal(lpm_priv->lpm_id, lv1_signal_group, bus_select,
+                                signal_select, attr1, attr2, attr3);
+       if (ret)
+               dev_err(sbd_core(),
+                       "%s:%u: error:%d 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
+                       __func__, __LINE__, ret, lv1_signal_group, bus_select,
+                       signal_select, attr1, attr2, attr3);
+
+       return ret;
+}
+
+int ps3_set_signal(u64 signal_group, u8 signal_bit, u16 sub_unit,
+                  u8 bus_word)
+{
+       int ret;
+       u64 lv1_signal_group;
+       u64 bus_select;
+       u64 signal_select;
+       u64 attr1, attr2, attr3;
+
+       if (signal_group == 0)
+               return __ps3_set_signal(0, 0, 0, 0, 0, 0);
+
+       lv1_signal_group =
+               pm_signal_group_to_ps3_lv1_signal_group(signal_group);
+       bus_select = pm_bus_word_to_ps3_lv1_bus_word(bus_word);
+
+       switch (signal_group) {
+       case PM_SIG_GROUP_SPU_TRIGGER:
+               signal_select = 1;
+               signal_select = signal_select << (63 - signal_bit);
+               break;
+       case PM_SIG_GROUP_SPU_EVENT:
+               signal_select = 1;
+               signal_select = (signal_select << (63 - signal_bit)) | 0x3;
+               break;
+       default:
+               signal_select = 0;
+               break;
+       }
+
+       /*
+        * 0: physical object.
+        * 1: logical object.
+        * This parameter is only used for the PPE and SPE signals.
+        */
+       attr1 = 1;
+
+       /*
+        * This parameter is used to specify the target physical/logical
+        * PPE/SPE object.
+        */
+       if (PM_SIG_GROUP_SPU <= signal_group &&
+               signal_group < PM_SIG_GROUP_MFC_MAX)
+               attr2 = sub_unit;
+       else
+               attr2 = lpm_priv->pu_id;
+
+       /*
+        * This parameter is only used for setting the SPE signal.
+        */
+       attr3 = 0;
+
+       ret = __ps3_set_signal(lv1_signal_group, bus_select, signal_select,
+                              attr1, attr2, attr3);
+       if (ret)
+               dev_err(sbd_core(), "%s:%u: __ps3_set_signal failed: %d\n",
+                       __func__, __LINE__, ret);
+
+       return ret;
+}
+EXPORT_SYMBOL_GPL(ps3_set_signal);
+
+u32 ps3_get_hw_thread_id(int cpu)
+{
+       return get_hard_smp_processor_id(cpu);
+}
+EXPORT_SYMBOL_GPL(ps3_get_hw_thread_id);
+
+/**
+ * ps3_enable_pm - Enable the entire performance monitoring unit.
+ *
+ * When we enable the LPM, all pending writes to counters get committed.
+ */
+
+void ps3_enable_pm(u32 cpu)
+{
+       int result;
+       u64 tmp;
+       int insert_bookmark = 0;
+
+       lpm_priv->tb_count = 0;
+
+       if (use_start_stop_bookmark) {
+               if (!(lpm_priv->shadow.pm_start_stop &
+                       (PS3_PM_START_STOP_START_MASK
+                       | PS3_PM_START_STOP_STOP_MASK))) {
+                       result = lv1_set_lpm_trigger_control(lpm_priv->lpm_id,
+                               (PS3_PM_START_STOP_PPU_TH0_BOOKMARK_START |
+                               PS3_PM_START_STOP_PPU_TH1_BOOKMARK_START |
+                               PS3_PM_START_STOP_PPU_TH0_BOOKMARK_STOP |
+                               PS3_PM_START_STOP_PPU_TH1_BOOKMARK_STOP),
+                               0xFFFFFFFFFFFFFFFFULL, &tmp);
+
+                       if (result)
+                               dev_err(sbd_core(), "%s:%u: "
+                                       "lv1_set_lpm_trigger_control failed: "
+                                       "%s\n", __func__, __LINE__,
+                                       ps3_result(result));
+
+                       insert_bookmark = !result;
+               }
+       }
+
+       result = lv1_start_lpm(lpm_priv->lpm_id);
+
+       if (result)
+               dev_err(sbd_core(), "%s:%u: lv1_start_lpm failed: %s\n",
+                       __func__, __LINE__, ps3_result(result));
+
+       if (use_start_stop_bookmark && !result && insert_bookmark)
+               ps3_set_bookmark(get_tb() | PS3_PM_BOOKMARK_START);
+}
+EXPORT_SYMBOL_GPL(ps3_enable_pm);
+
+/**
+ * ps3_disable_pm - Disable the entire performance monitoring unit.
+ */
+
+void ps3_disable_pm(u32 cpu)
+{
+       int result;
+       u64 tmp;
+
+       ps3_set_bookmark(get_tb() | PS3_PM_BOOKMARK_STOP);
+
+       result = lv1_stop_lpm(lpm_priv->lpm_id, &tmp);
+
+       if (result) {
+               if(result != LV1_WRONG_STATE)
+                       dev_err(sbd_core(), "%s:%u: lv1_stop_lpm failed: %s\n",
+                               __func__, __LINE__, ps3_result(result));
+               return;
+       }
+
+       lpm_priv->tb_count = tmp;
+
+       dev_dbg(sbd_core(), "%s:%u: tb_count %lu (%lxh)\n", __func__, __LINE__,
+               lpm_priv->tb_count, lpm_priv->tb_count);
+}
+EXPORT_SYMBOL_GPL(ps3_disable_pm);
+
+/**
+ * ps3_lpm_copy_tb - Copy data from the trace buffer to a kernel buffer.
+ * @offset: Offset in bytes from the start of the trace buffer.
+ * @buf: Copy destination.
+ * @count: Maximum count of bytes to copy.
+ * @bytes_copied: Pointer to a variable that will recieve the number of
+ *  bytes copied to @buf.
+ *
+ * On error @buf will contain any successfully copied trace buffer data
+ * and bytes_copied will be set to the number of bytes successfully copied.
+ */
+
+int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
+                   unsigned long *bytes_copied)
+{
+       int result;
+
+       *bytes_copied = 0;
+
+       if (!lpm_priv->tb_cache)
+               return -EPERM;
+
+       if (offset >= lpm_priv->tb_count)
+               return 0;
+
+       count = min(count, lpm_priv->tb_count - offset);
+
+       while (*bytes_copied < count) {
+               const unsigned long request = count - *bytes_copied;
+               u64 tmp;
+
+               result = lv1_copy_lpm_trace_buffer(lpm_priv->lpm_id, offset,
+                                                  request, &tmp);
+               if (result) {
+                       dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%lx\n",
+                               __func__, __LINE__, request, offset);
+
+                       dev_err(sbd_core(), "%s:%u: lv1_copy_lpm_trace_buffer "
+                               "failed: %s\n", __func__, __LINE__,
+                               ps3_result(result));
+                       return result == LV1_WRONG_STATE ? -EBUSY : -EINVAL;
+               }
+
+               memcpy(buf, lpm_priv->tb_cache, tmp);
+               buf += tmp;
+               *bytes_copied += tmp;
+               offset += tmp;
+       }
+       dev_dbg(sbd_core(), "%s:%u: copied %lxh bytes\n", __func__, __LINE__,
+               *bytes_copied);
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(ps3_lpm_copy_tb);
+
+/**
+ * ps3_lpm_copy_tb_to_user - Copy data from the trace buffer to a user buffer.
+ * @offset: Offset in bytes from the start of the trace buffer.
+ * @buf: A __user copy destination.
+ * @count: Maximum count of bytes to copy.
+ * @bytes_copied: Pointer to a variable that will recieve the number of
+ *  bytes copied to @buf.
+ *
+ * On error @buf will contain any successfully copied trace buffer data
+ * and bytes_copied will be set to the number of bytes successfully copied.
+ */
+
+int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
+                           unsigned long count, unsigned long *bytes_copied)
+{
+       int result;
+
+       *bytes_copied = 0;
+
+       if (!lpm_priv->tb_cache)
+               return -EPERM;
+
+       if (offset >= lpm_priv->tb_count)
+               return 0;
+
+       count = min(count, lpm_priv->tb_count - offset);
+
+       while (*bytes_copied < count) {
+               const unsigned long request = count - *bytes_copied;
+               u64 tmp;
+
+               result = lv1_copy_lpm_trace_buffer(lpm_priv->lpm_id, offset,
+                                                  request, &tmp);
+               if (result) {
+                       dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%lx\n",
+                               __func__, __LINE__, request, offset);
+                       dev_err(sbd_core(), "%s:%u: lv1_copy_lpm_trace_buffer "
+                               "failed: %s\n", __func__, __LINE__,
+                               ps3_result(result));
+                       return result == LV1_WRONG_STATE ? -EBUSY : -EINVAL;
+               }
+
+               result = copy_to_user(buf, lpm_priv->tb_cache, tmp);
+
+               if (result) {
+                       dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%p\n",
+                               __func__, __LINE__, tmp, buf);
+                       dev_err(sbd_core(), "%s:%u: copy_to_user failed: %d\n",
+                               __func__, __LINE__, result);
+                       return -EFAULT;
+               }
+
+               buf += tmp;
+               *bytes_copied += tmp;
+               offset += tmp;
+       }
+       dev_dbg(sbd_core(), "%s:%u: copied %lxh bytes\n", __func__, __LINE__,
+               *bytes_copied);
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(ps3_lpm_copy_tb_to_user);
+
+/**
+ * ps3_get_and_clear_pm_interrupts -
+ *
+ * Clearing interrupts for the entire performance monitoring unit.
+ * Reading pm_status clears the interrupt bits.
+ */
+
+u32 ps3_get_and_clear_pm_interrupts(u32 cpu)
+{
+       return ps3_read_pm(cpu, pm_status);
+}
+EXPORT_SYMBOL_GPL(ps3_get_and_clear_pm_interrupts);
+
+/**
+ * ps3_enable_pm_interrupts -
+ *
+ * Enabling interrupts for the entire performance monitoring unit.
+ * Enables the interrupt bits in the pm_status register.
+ */
+
+void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask)
+{
+       if (mask)
+               ps3_write_pm(cpu, pm_status, mask);
+}
+EXPORT_SYMBOL_GPL(ps3_enable_pm_interrupts);
+
+/**
+ * ps3_enable_pm_interrupts -
+ *
+ * Disabling interrupts for the entire performance monitoring unit.
+ */
+
+void ps3_disable_pm_interrupts(u32 cpu)
+{
+       ps3_get_and_clear_pm_interrupts(cpu);
+       ps3_write_pm(cpu, pm_status, 0);
+}
+EXPORT_SYMBOL_GPL(ps3_disable_pm_interrupts);
+
+/**
+ * ps3_lpm_open - Open the logical performance monitor device.
+ * @tb_type: Specifies the type of trace buffer lv1 sould use for this lpm
+ *  instance, specified by one of enum ps3_lpm_tb_type.
+ * @tb_cache: Optional user supplied buffer to use as the trace buffer cache.
+ *  If NULL, the driver will allocate and manage an internal buffer.
+ *  Unused when when @tb_type is PS3_LPM_TB_TYPE_NONE.
+ * @tb_cache_size: The size in bytes of the user supplied @tb_cache buffer.
+ *  Unused when @tb_cache is NULL or @tb_type is PS3_LPM_TB_TYPE_NONE.
+ */
+
+int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
+       u64 tb_cache_size)
+{
+       int result;
+       u64 tb_size;
+
+       BUG_ON(!lpm_priv);
+       BUG_ON(tb_type != PS3_LPM_TB_TYPE_NONE
+               && tb_type != PS3_LPM_TB_TYPE_INTERNAL);
+
+       if (tb_type == PS3_LPM_TB_TYPE_NONE && tb_cache)
+               dev_dbg(sbd_core(), "%s:%u: bad in vals\n", __func__, __LINE__);
+
+       if (!atomic_add_unless(&lpm_priv->open, 1, 1)) {
+               dev_dbg(sbd_core(), "%s:%u: busy\n", __func__, __LINE__);
+               return -EBUSY;
+       }
+
+       /* Note tb_cache needs 128 byte alignment. */
+
+       if (tb_type == PS3_LPM_TB_TYPE_NONE) {
+               lpm_priv->tb_cache_size = 0;
+               lpm_priv->tb_cache_internal = NULL;
+               lpm_priv->tb_cache = NULL;
+       } else if (tb_cache) {
+               if (tb_cache != (void *)_ALIGN_UP((unsigned long)tb_cache, 128)
+                       || tb_cache_size != _ALIGN_UP(tb_cache_size, 128)) {
+                       dev_err(sbd_core(), "%s:%u: unaligned tb_cache\n",
+                               __func__, __LINE__);
+                       result = -EINVAL;
+                       goto fail_align;
+               }
+               lpm_priv->tb_cache_size = tb_cache_size;
+               lpm_priv->tb_cache_internal = NULL;
+               lpm_priv->tb_cache = tb_cache;
+       } else {
+               lpm_priv->tb_cache_size = PS3_LPM_DEFAULT_TB_CACHE_SIZE;
+               lpm_priv->tb_cache_internal = kzalloc(
+                       lpm_priv->tb_cache_size + 127, GFP_KERNEL);
+               if (!lpm_priv->tb_cache_internal) {
+                       dev_err(sbd_core(), "%s:%u: alloc internal tb_cache "
+                               "failed\n", __func__, __LINE__);
+                       result = -ENOMEM;
+                       goto fail_malloc;
+               }
+               lpm_priv->tb_cache = (void *)_ALIGN_UP(
+                       (unsigned long)lpm_priv->tb_cache_internal, 128);
+       }
+
+       result = lv1_construct_lpm(lpm_priv->node_id, tb_type, 0, 0,
+                               ps3_mm_phys_to_lpar(__pa(lpm_priv->tb_cache)),
+                               lpm_priv->tb_cache_size, &lpm_priv->lpm_id,
+                               &lpm_priv->outlet_id, &tb_size);
+
+       if (result) {
+               dev_err(sbd_core(), "%s:%u: lv1_construct_lpm failed: %s\n",
+                       __func__, __LINE__, ps3_result(result));
+               result = -EINVAL;
+               goto fail_construct;
+       }
+
+       lpm_priv->shadow.pm_control = PS3_LPM_SHADOW_REG_INIT;
+       lpm_priv->shadow.pm_start_stop = PS3_LPM_SHADOW_REG_INIT;
+       lpm_priv->shadow.pm_interval = PS3_LPM_SHADOW_REG_INIT;
+       lpm_priv->shadow.group_control = PS3_LPM_SHADOW_REG_INIT;
+       lpm_priv->shadow.debug_bus_control = PS3_LPM_SHADOW_REG_INIT;
+
+       dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%lx, outlet_id 0x%lx, "
+               "tb_size 0x%lx\n", __func__, __LINE__, lpm_priv->lpm_id,
+               lpm_priv->outlet_id, tb_size);
+
+       return 0;
+
+fail_construct:
+       kfree(lpm_priv->tb_cache_internal);
+       lpm_priv->tb_cache_internal = NULL;
+fail_malloc:
+fail_align:
+       atomic_dec(&lpm_priv->open);
+       return result;
+}
+EXPORT_SYMBOL_GPL(ps3_lpm_open);
+
+/**
+ * ps3_lpm_close - Close the lpm device.
+ *
+ */
+
+int ps3_lpm_close(void)
+{
+       dev_dbg(sbd_core(), "%s:%u\n", __func__, __LINE__);
+
+       lv1_destruct_lpm(lpm_priv->lpm_id);
+       lpm_priv->lpm_id = 0;
+
+       kfree(lpm_priv->tb_cache_internal);
+       lpm_priv->tb_cache_internal = NULL;
+
+       atomic_dec(&lpm_priv->open);
+       return 0;
+}
+EXPORT_SYMBOL_GPL(ps3_lpm_close);
+
+static int __devinit ps3_lpm_probe(struct ps3_system_bus_device *dev)
+{
+       dev_dbg(&dev->core, " -> %s:%u\n", __func__, __LINE__);
+
+       if (lpm_priv) {
+               dev_info(&dev->core, "%s:%u: called twice\n",
+                       __func__, __LINE__);
+               return -EBUSY;
+       }
+
+       lpm_priv = kzalloc(sizeof(*lpm_priv), GFP_KERNEL);
+
+       if (!lpm_priv)
+               return -ENOMEM;
+
+       lpm_priv->sbd = dev;
+       lpm_priv->node_id = dev->lpm.node_id;
+       lpm_priv->pu_id = dev->lpm.pu_id;
+       lpm_priv->rights = dev->lpm.rights;
+
+       dev_info(&dev->core, " <- %s:%u:\n", __func__, __LINE__);
+
+       return 0;
+}
+
+static int ps3_lpm_remove(struct ps3_system_bus_device *dev)
+{
+       dev_dbg(&dev->core, " -> %s:%u:\n", __func__, __LINE__);
+
+       ps3_lpm_close();
+
+       kfree(lpm_priv);
+       lpm_priv = NULL;
+
+       dev_info(&dev->core, " <- %s:%u:\n", __func__, __LINE__);
+       return 0;
+}
+
+static struct ps3_system_bus_driver ps3_lpm_driver = {
+       .match_id = PS3_MATCH_ID_LPM,
+       .core.name      = "ps3-lpm",
+       .core.owner     = THIS_MODULE,
+       .probe          = ps3_lpm_probe,
+       .remove         = ps3_lpm_remove,
+       .shutdown       = ps3_lpm_remove,
+};
+
+static int __init ps3_lpm_init(void)
+{
+       pr_debug("%s:%d:\n", __func__, __LINE__);
+       return ps3_system_bus_driver_register(&ps3_lpm_driver);
+}
+
+static void __exit ps3_lpm_exit(void)
+{
+       pr_debug("%s:%d:\n", __func__, __LINE__);
+       ps3_system_bus_driver_unregister(&ps3_lpm_driver);
+}
+
+module_init(ps3_lpm_init);
+module_exit(ps3_lpm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PS3 Logical Performance Monitor Driver");
+MODULE_AUTHOR("Sony Corporation");
+MODULE_ALIAS(PS3_MODULE_ALIAS_LPM);
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ps3/ps3-sys-manager.c powerpc.git/drivers/ps3/ps3-sys-manager.c
--- linux-2.6.24/drivers/ps3/ps3-sys-manager.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/ps3/ps3-sys-manager.c   2008-01-28 20:26:18.000000000 +0100
@@ -452,7 +452,7 @@
        case PS3_SM_EVENT_THERMAL_ALERT:
                dev_dbg(&dev->core, "%s:%d: THERMAL_ALERT (zone %u)\n",
                        __func__, __LINE__, event.value);
-               printk(KERN_INFO "PS3 Thermal Alert Zone %u\n", event.value);
+               pr_info("PS3 Thermal Alert Zone %u\n", event.value);
                break;
        case PS3_SM_EVENT_THERMAL_CLEARED:
                dev_dbg(&dev->core, "%s:%d: THERMAL_CLEARED (zone %u)\n",
@@ -488,7 +488,7 @@
        result = ps3_vuart_read(dev, &cmd, sizeof(cmd));
        BUG_ON(result && "need to retry here");
 
-       if(result)
+       if (result)
                return result;
 
        if (cmd.version != 1) {
@@ -521,7 +521,7 @@
        result = ps3_vuart_read(dev, &header,
                sizeof(struct ps3_sys_manager_header));
 
-       if(result)
+       if (result)
                return result;
 
        if (header.version != 1) {
@@ -589,9 +589,9 @@
                PS3_SM_WAKE_DEFAULT);
        ps3_sys_manager_send_request_shutdown(dev);
 
-       printk(KERN_EMERG "System Halted, OK to turn off power\n");
+       pr_emerg("System Halted, OK to turn off power\n");
 
-       while(1)
+       while (1)
                ps3_sys_manager_handle_msg(dev);
 }
 
@@ -626,9 +626,9 @@
                PS3_SM_WAKE_DEFAULT);
        ps3_sys_manager_send_request_shutdown(dev);
 
-       printk(KERN_EMERG "System Halted, OK to turn off power\n");
+       pr_emerg("System Halted, OK to turn off power\n");
 
-       while(1)
+       while (1)
                ps3_sys_manager_handle_msg(dev);
 }
 
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/ps3/ps3-vuart.c powerpc.git/drivers/ps3/ps3-vuart.c
--- linux-2.6.24/drivers/ps3/ps3-vuart.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/ps3/ps3-vuart.c 2008-01-28 20:26:18.000000000 +0100
@@ -108,18 +108,18 @@
 struct ports_bmp {
        u64 status;
        u64 unused[3];
-} __attribute__ ((aligned (32)));
+} __attribute__((aligned(32)));
 
 #define dump_ports_bmp(_b) _dump_ports_bmp(_b, __func__, __LINE__)
 static void __maybe_unused _dump_ports_bmp(
-       const struct ports_bmp* bmp, const char* func, int line)
+       const struct ports_bmp *bmp, const char *func, int line)
 {
        pr_debug("%s:%d: ports_bmp: %016lxh\n", func, line, bmp->status);
 }
 
 #define dump_port_params(_b) _dump_port_params(_b, __func__, __LINE__)
 static void __maybe_unused _dump_port_params(unsigned int port_number,
-       const char* func, int line)
+       const char *func, int line)
 {
 #if defined(DEBUG)
        static const char *strings[] = {
@@ -363,7 +363,7 @@
  */
 
 static int ps3_vuart_raw_write(struct ps3_system_bus_device *dev,
-       const void* buf, unsigned int bytes, unsigned long *bytes_written)
+       const void *buf, unsigned int bytes, unsigned long *bytes_written)
 {
        int result;
        struct ps3_vuart_port_priv *priv = to_port_priv(dev);
@@ -431,7 +431,7 @@
        int result;
        struct ps3_vuart_port_priv *priv = to_port_priv(dev);
        u64 bytes_waiting;
-       void* tmp;
+       void *tmp;
 
        result = ps3_vuart_get_rx_bytes_waiting(dev, &bytes_waiting);
 
@@ -526,9 +526,8 @@
 
        lb = kmalloc(sizeof(struct list_buffer) + bytes, GFP_KERNEL);
 
-       if (!lb) {
+       if (!lb)
                return -ENOMEM;
-       }
 
        memcpy(lb->data, buf, bytes);
        lb->head = lb->data;
@@ -878,7 +877,7 @@
 struct vuart_bus_priv {
        struct ports_bmp *bmp;
        unsigned int virq;
-       struct semaphore probe_mutex;
+       struct mutex probe_mutex;
        int use_count;
        struct ps3_system_bus_device *devices[PORT_COUNT];
 } static vuart_bus_priv;
@@ -926,9 +925,8 @@
 
        BUG_ON(vuart_bus_priv.use_count > 2);
 
-       if (vuart_bus_priv.use_count != 1) {
+       if (vuart_bus_priv.use_count != 1)
                return 0;
-       }
 
        BUG_ON(vuart_bus_priv.bmp);
 
@@ -1017,7 +1015,7 @@
                return -EINVAL;
        }
 
-       down(&vuart_bus_priv.probe_mutex);
+       mutex_lock(&vuart_bus_priv.probe_mutex);
 
        result = ps3_vuart_bus_interrupt_get();
 
@@ -1077,7 +1075,7 @@
                goto fail_probe;
        }
 
-       up(&vuart_bus_priv.probe_mutex);
+       mutex_unlock(&vuart_bus_priv.probe_mutex);
 
        return result;
 
@@ -1090,7 +1088,7 @@
 fail_busy:
        ps3_vuart_bus_interrupt_put();
 fail_setup_interrupt:
-       up(&vuart_bus_priv.probe_mutex);
+       mutex_unlock(&vuart_bus_priv.probe_mutex);
        dev_dbg(&dev->core, "%s:%d: failed\n", __func__, __LINE__);
        return result;
 }
@@ -1129,7 +1127,7 @@
 
        BUG_ON(!dev);
 
-       down(&vuart_bus_priv.probe_mutex);
+       mutex_lock(&vuart_bus_priv.probe_mutex);
 
        dev_dbg(&dev->core, " -> %s:%d: match_id %d\n", __func__, __LINE__,
                dev->match_id);
@@ -1137,7 +1135,7 @@
        if (!dev->core.driver) {
                dev_dbg(&dev->core, "%s:%d: no driver bound\n", __func__,
                        __LINE__);
-               up(&vuart_bus_priv.probe_mutex);
+               mutex_unlock(&vuart_bus_priv.probe_mutex);
                return 0;
        }
 
@@ -1160,7 +1158,7 @@
        priv = NULL;
 
        dev_dbg(&dev->core, " <- %s:%d\n", __func__, __LINE__);
-       up(&vuart_bus_priv.probe_mutex);
+       mutex_unlock(&vuart_bus_priv.probe_mutex);
        return 0;
 }
 
@@ -1180,7 +1178,7 @@
 
        BUG_ON(!dev);
 
-       down(&vuart_bus_priv.probe_mutex);
+       mutex_lock(&vuart_bus_priv.probe_mutex);
 
        dev_dbg(&dev->core, " -> %s:%d: match_id %d\n", __func__, __LINE__,
                dev->match_id);
@@ -1188,7 +1186,7 @@
        if (!dev->core.driver) {
                dev_dbg(&dev->core, "%s:%d: no driver bound\n", __func__,
                        __LINE__);
-               up(&vuart_bus_priv.probe_mutex);
+               mutex_unlock(&vuart_bus_priv.probe_mutex);
                return 0;
        }
 
@@ -1212,7 +1210,7 @@
 
        dev_dbg(&dev->core, " <- %s:%d\n", __func__, __LINE__);
 
-       up(&vuart_bus_priv.probe_mutex);
+       mutex_unlock(&vuart_bus_priv.probe_mutex);
        return 0;
 }
 
@@ -1223,7 +1221,7 @@
        if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
                return -ENODEV;
 
-       init_MUTEX(&vuart_bus_priv.probe_mutex);
+       mutex_init(&vuart_bus_priv.probe_mutex);
 
        return 0;
 }
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/serial/Kconfig powerpc.git/drivers/serial/Kconfig
--- linux-2.6.24/drivers/serial/Kconfig 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/serial/Kconfig  2008-01-28 20:26:19.000000000 +0100
@@ -1284,4 +1284,14 @@
          Currently, only 8250 compatible ports are supported, but
          others can easily be added.
 
+config SERIAL_QE
+       tristate "Freescale QUICC Engine serial port support"
+       depends on QUICC_ENGINE
+       select SERIAL_CORE
+       select FW_LOADER
+       default n
+       help
+         This driver supports the QE serial ports on Freescale embedded
+         PowerPC that contain a QUICC Engine.
+
 endmenu
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/serial/Makefile powerpc.git/drivers/serial/Makefile
--- linux-2.6.24/drivers/serial/Makefile        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/serial/Makefile 2008-01-28 20:26:19.000000000 +0100
@@ -64,3 +64,4 @@
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/serial/cpm_uart/cpm_uart_cpm1.c powerpc.git/drivers/serial/cpm_uart/cpm_uart_cpm1.c
--- linux-2.6.24/drivers/serial/cpm_uart/cpm_uart_cpm1.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/serial/cpm_uart/cpm_uart_cpm1.c 2008-01-28 20:26:19.000000000 +0100
@@ -52,11 +52,7 @@
 #ifdef CONFIG_PPC_CPM_NEW_BINDING
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
-       u16 __iomem *cpcr = &cpmp->cp_cpcr;
-
-       out_be16(cpcr, port->command | (cmd << 8) | CPM_CR_FLG);
-       while (in_be16(cpcr) & CPM_CR_FLG)
-               ;
+       cpm_command(port->command, cmd);
 }
 #else
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/serial/cpm_uart/cpm_uart_cpm2.c powerpc.git/drivers/serial/cpm_uart/cpm_uart_cpm2.c
--- linux-2.6.24/drivers/serial/cpm_uart/cpm_uart_cpm2.c        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/serial/cpm_uart/cpm_uart_cpm2.c 2008-01-28 20:26:19.000000000 +0100
@@ -52,13 +52,7 @@
 #ifdef CONFIG_PPC_CPM_NEW_BINDING
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
-       cpm_cpm2_t __iomem *cp = cpm2_map(im_cpm);
-
-       out_be32(&cp->cp_cpcr, port->command | cmd | CPM_CR_FLG);
-       while (in_be32(&cp->cp_cpcr) & CPM_CR_FLG)
-               ;
-
-       cpm2_unmap(cp);
+       cpm_command(port->command, cmd);
 }
 #else
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
@@ -171,9 +165,9 @@
         * really has to get out of the driver so boards can
         * be supported in a sane fashion.
         */
+       volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 #ifndef CONFIG_STX_GP3
        volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-       volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
        io->iop_pparb |= 0x008b0000;
        io->iop_pdirb |= 0x00880000;
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/serial/mpc52xx_uart.c powerpc.git/drivers/serial/mpc52xx_uart.c
--- linux-2.6.24/drivers/serial/mpc52xx_uart.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/serial/mpc52xx_uart.c   2008-01-28 20:26:19.000000000 +0100
@@ -36,7 +36,7 @@
  * DCD. However, the pin multiplexing aren't changed and should be set either
  * by the bootloader or in the platform init code.
  *
- * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
+ * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
  * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
  * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
  * fpr the console code : without this 1:1 mapping, at early boot time, when we
@@ -68,11 +68,12 @@
 #include <linux/sysrq.h>
 #include <linux/console.h>
 
-#include <asm/delay.h>
-#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/io.h>
 
 #if defined(CONFIG_PPC_MERGE)
-#include <asm/of_platform.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #else
 #include <linux/platform_device.h>
 #endif
@@ -111,16 +112,18 @@
 #endif
 
 #define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
+#define FIFO(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
 
 
 /* Forward declaration of the interruption handling routine */
-static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id);
+static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
 
 
 /* Simple macro to test if a port is console or not. This one is taken
  * for serial_core.c and maybe should be moved to serial_core.h ? */
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
-#define uart_console(port)     ((port)->cons && (port)->cons->index == (port)->line)
+#define uart_console(port) \
+       ((port)->cons && (port)->cons->index == (port)->line)
 #else
 #define uart_console(port)     (0)
 #endif
@@ -162,7 +165,7 @@
 {
        /* port->lock taken by caller */
        port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
-       out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+       out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
 }
 
 static void
@@ -170,7 +173,7 @@
 {
        /* port->lock taken by caller */
        port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
-       out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+       out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
 }
 
 static void
@@ -184,7 +187,7 @@
                /* Make sure tx interrupts are on */
                /* Truly necessary ??? They should be anyway */
                port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
-               out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+               out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
        }
 
        spin_unlock_irqrestore(&port->lock, flags);
@@ -195,7 +198,7 @@
 {
        /* port->lock taken by caller */
        port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
-       out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+       out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
 }
 
 static void
@@ -210,10 +213,10 @@
        unsigned long flags;
        spin_lock_irqsave(&port->lock, flags);
 
-       if ( ctl == -1 )
-               out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK);
+       if (ctl == -1)
+               out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK);
        else
-               out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK);
+               out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK);
 
        spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -222,6 +225,7 @@
 mpc52xx_uart_startup(struct uart_port *port)
 {
        struct mpc52xx_psc __iomem *psc = PSC(port);
+       struct mpc52xx_psc_fifo __iomem *fifo = FIFO(port);
        int ret;
 
        /* Request IRQ */
@@ -231,23 +235,23 @@
                return ret;
 
        /* Reset/activate the port, clear and enable interrupts */
-       out_8(&psc->command,MPC52xx_PSC_RST_RX);
-       out_8(&psc->command,MPC52xx_PSC_RST_TX);
+       out_8(&psc->command, MPC52xx_PSC_RST_RX);
+       out_8(&psc->command, MPC52xx_PSC_RST_TX);
 
-       out_be32(&psc->sicr,0); /* UART mode DCD ignored */
+       out_be32(&psc->sicr, 0);        /* UART mode DCD ignored */
 
        out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
 
-       out_8(&psc->rfcntl, 0x00);
-       out_be16(&psc->rfalarm, 0x1ff);
-       out_8(&psc->tfcntl, 0x07);
-       out_be16(&psc->tfalarm, 0x80);
+       out_8(&fifo->rfcntl, 0x00);
+       out_be16(&fifo->rfalarm, 0x1ff);
+       out_8(&fifo->tfcntl, 0x07);
+       out_be16(&fifo->tfalarm, 0x80);
 
        port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
-       out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+       out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
 
-       out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
-       out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+       out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
+       out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
 
        return 0;
 }
@@ -258,12 +262,12 @@
        struct mpc52xx_psc __iomem *psc = PSC(port);
 
        /* Shut down the port.  Leave TX active if on a console port */
-       out_8(&psc->command,MPC52xx_PSC_RST_RX);
+       out_8(&psc->command, MPC52xx_PSC_RST_RX);
        if (!uart_console(port))
-               out_8(&psc->command,MPC52xx_PSC_RST_TX);
+               out_8(&psc->command, MPC52xx_PSC_RST_TX);
 
        port->read_status_mask = 0;
-       out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+       out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
 
        /* Release interrupt */
        free_irq(port->irq, port);
@@ -271,7 +275,7 @@
 
 static void
 mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
-                         struct ktermios *old)
+                        struct ktermios *old)
 {
        struct mpc52xx_psc __iomem *psc = PSC(port);
        unsigned long flags;
@@ -283,14 +287,14 @@
        mr1 = 0;
 
        switch (new->c_cflag & CSIZE) {
-               case CS5:       mr1 |= MPC52xx_PSC_MODE_5_BITS;
-                               break;
-               case CS6:       mr1 |= MPC52xx_PSC_MODE_6_BITS;
-                               break;
-               case CS7:       mr1 |= MPC52xx_PSC_MODE_7_BITS;
-                               break;
-               case CS8:
-               default:        mr1 |= MPC52xx_PSC_MODE_8_BITS;
+       case CS5:       mr1 |= MPC52xx_PSC_MODE_5_BITS;
+               break;
+       case CS6:       mr1 |= MPC52xx_PSC_MODE_6_BITS;
+               break;
+       case CS7:       mr1 |= MPC52xx_PSC_MODE_7_BITS;
+               break;
+       case CS8:
+       default:        mr1 |= MPC52xx_PSC_MODE_8_BITS;
        }
 
        if (new->c_cflag & PARENB) {
@@ -332,24 +336,24 @@
                udelay(1);
 
        if (!j)
-               printk( KERN_ERR "mpc52xx_uart.c: "
+               printk(KERN_ERR "mpc52xx_uart.c: "
                        "Unable to flush RX & TX fifos in-time in set_termios."
-                       "Some chars may have been lost.\n" );
+                       "Some chars may have been lost.\n");
 
        /* Reset the TX & RX */
-       out_8(&psc->command,MPC52xx_PSC_RST_RX);
-       out_8(&psc->command,MPC52xx_PSC_RST_TX);
+       out_8(&psc->command, MPC52xx_PSC_RST_RX);
+       out_8(&psc->command, MPC52xx_PSC_RST_TX);
 
        /* Send new mode settings */
-       out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
-       out_8(&psc->mode,mr1);
-       out_8(&psc->mode,mr2);
-       out_8(&psc->ctur,ctr >> 8);
-       out_8(&psc->ctlr,ctr & 0xff);
+       out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
+       out_8(&psc->mode, mr1);
+       out_8(&psc->mode, mr2);
+       out_8(&psc->ctur, ctr >> 8);
+       out_8(&psc->ctlr, ctr & 0xff);
 
        /* Reenable TX & RX */
-       out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
-       out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+       out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
+       out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
 
        /* We're all set, release the lock */
        spin_unlock_irqrestore(&port->lock, flags);
@@ -364,7 +368,8 @@
 static void
 mpc52xx_uart_release_port(struct uart_port *port)
 {
-       if (port->flags & UPF_IOREMAP) { /* remapped by us ? */
+       /* remapped by us ? */
+       if (port->flags & UPF_IOREMAP) {
                iounmap(port->membase);
                port->membase = NULL;
        }
@@ -379,7 +384,7 @@
 
        if (port->flags & UPF_IOREMAP) /* Need to remap ? */
                port->membase = ioremap(port->mapbase,
-                                       sizeof(struct mpc52xx_psc));
+                                       sizeof(struct mpc52xx_psc));
 
        if (!port->membase)
                return -EINVAL;
@@ -398,22 +403,22 @@
 static void
 mpc52xx_uart_config_port(struct uart_port *port, int flags)
 {
-       if ( (flags & UART_CONFIG_TYPE) &&
-            (mpc52xx_uart_request_port(port) == 0) )
-               port->type = PORT_MPC52xx;
+       if ((flags & UART_CONFIG_TYPE)
+               && (mpc52xx_uart_request_port(port) == 0))
+               port->type = PORT_MPC52xx;
 }
 
 static int
 mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-       if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx )
+       if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx)
                return -EINVAL;
 
-       if ( (ser->irq != port->irq) ||
-            (ser->io_type != SERIAL_IO_MEM) ||
-            (ser->baud_base != port->uartclk)  ||
-            (ser->iomem_base != (void*)port->mapbase) ||
-            (ser->hub6 != 0 ) )
+       if ((ser->irq != port->irq) ||
+           (ser->io_type != SERIAL_IO_MEM) ||
+           (ser->baud_base != port->uartclk)  ||
+           (ser->iomem_base != (void *)port->mapbase) ||
+           (ser->hub6 != 0))
                return -EINVAL;
 
        return 0;
@@ -455,8 +460,8 @@
        unsigned short status;
 
        /* While we can read, do so ! */
-       while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
-               MPC52xx_PSC_SR_RXRDY) {
+       while ((status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
+               MPC52xx_PSC_SR_RXRDY) {
 
                /* Get the char */
                ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
@@ -474,9 +479,9 @@
                flag = TTY_NORMAL;
                port->icount.rx++;
 
-               if ( status & (MPC52xx_PSC_SR_PE |
-                              MPC52xx_PSC_SR_FE |
-                              MPC52xx_PSC_SR_RB) ) {
+               if (status & (MPC52xx_PSC_SR_PE |
+                             MPC52xx_PSC_SR_FE |
+                             MPC52xx_PSC_SR_RB)) {
 
                        if (status & MPC52xx_PSC_SR_RB) {
                                flag = TTY_BREAK;
@@ -487,7 +492,7 @@
                                flag = TTY_FRAME;
 
                        /* Clear error condition */
-                       out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT);
+                       out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
 
                }
                tty_insert_flip_char(tty, ch, flag);
@@ -568,16 +573,16 @@
 
                /* Do we need to receive chars ? */
                /* For this RX interrupts must be on and some chars waiting */
-               if ( status & MPC52xx_PSC_IMR_RXRDY )
+               if (status & MPC52xx_PSC_IMR_RXRDY)
                        keepgoing |= mpc52xx_uart_int_rx_chars(port);
 
                /* Do we need to send chars ? */
                /* For this, TX must be ready and TX interrupt enabled */
-               if ( status & MPC52xx_PSC_IMR_TXRDY )
+               if (status & MPC52xx_PSC_IMR_TXRDY)
                        keepgoing |= mpc52xx_uart_int_tx_chars(port);
 
                /* Limit number of iteration */
-               if ( !(--pass) )
+               if (!(--pass))
                        keepgoing = 0;
 
        } while (keepgoing);
@@ -596,7 +601,7 @@
 
 static void __init
 mpc52xx_console_get_options(struct uart_port *port,
-                            int *baud, int *parity, int *bits, int *flow)
+                           int *baud, int *parity, int *bits, int *flow)
 {
        struct mpc52xx_psc __iomem *psc = PSC(port);
        unsigned char mr1;
@@ -604,7 +609,7 @@
        pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
 
        /* Read the mode registers */
-       out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
+       out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
        mr1 = in_8(&psc->mode);
 
        /* CT{U,L}R are write-only ! */
@@ -616,11 +621,18 @@
 
        /* Parse them */
        switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
-               case MPC52xx_PSC_MODE_5_BITS:   *bits = 5; break;
-               case MPC52xx_PSC_MODE_6_BITS:   *bits = 6; break;
-               case MPC52xx_PSC_MODE_7_BITS:   *bits = 7; break;
-               case MPC52xx_PSC_MODE_8_BITS:
-               default:                        *bits = 8;
+       case MPC52xx_PSC_MODE_5_BITS:
+               *bits = 5;
+               break;
+       case MPC52xx_PSC_MODE_6_BITS:
+               *bits = 6;
+               break;
+       case MPC52xx_PSC_MODE_7_BITS:
+               *bits = 7;
+               break;
+       case MPC52xx_PSC_MODE_8_BITS:
+       default:
+               *bits = 8;
        }
 
        if (mr1 & MPC52xx_PSC_MODE_PARNONE)
@@ -657,7 +669,7 @@
                /* Wait the TX buffer to be empty */
                j = 20000;      /* Maximum wait */
                while (!(in_be16(&psc->mpc52xx_psc_status) &
-                        MPC52xx_PSC_SR_TXEMP) && --j)
+                        MPC52xx_PSC_SR_TXEMP) && --j)
                        udelay(1);
        }
 
@@ -730,16 +742,18 @@
        }
 
        pr_debug("Console on ttyPSC%x is %s\n",
-                co->index, mpc52xx_uart_nodes[co->index]->full_name);
+                co->index, mpc52xx_uart_nodes[co->index]->full_name);
 
        /* Fetch register locations */
-       if ((ret = of_address_to_resource(np, 0, &res)) != 0) {
+       ret = of_address_to_resource(np, 0, &res);
+       if (ret) {
                pr_debug("Could not get resources for PSC%x\n", co->index);
                return ret;
        }
 
        /* Search for bus-frequency property in this node or a parent */
-       if ((ipb_freq = mpc52xx_find_ipb_freq(np)) == 0) {
+       ipb_freq = mpc52xx_find_ipb_freq(np);
+       if (ipb_freq == 0) {
                pr_debug("Could not find IPB bus frequency!\n");
                return -EINVAL;
        }
@@ -757,7 +771,8 @@
                return -EINVAL;
 
        pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n",
-                (void*)port->mapbase, port->membase, port->irq, port->uartclk);
+                (void *)port->mapbase, port->membase,
+                port->irq, port->uartclk);
 
        /* Setup the port parameters accoding to options */
        if (options)
@@ -766,7 +781,7 @@
                mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
 
        pr_debug("Setting console parameters: %i %i%c1 flow=%c\n",
-                baud, bits, parity, flow);
+                baud, bits, parity, flow);
 
        return uart_set_options(port, co, baud, parity, bits, flow);
 }
@@ -781,7 +796,7 @@
        .device = uart_console_device,
        .setup  = mpc52xx_console_setup,
        .flags  = CON_PRINTBUFFER,
-       .index  = -1,   /* Specified on the cmdline (e.g. console=ttyPSC0 ) */
+       .index  = -1,   /* Specified on the cmdline (e.g. console=ttyPSC0) */
        .data   = &mpc52xx_uart_driver,
 };
 
@@ -809,7 +824,6 @@
 /* ======================================================================== */
 
 static struct uart_driver mpc52xx_uart_driver = {
-       .owner          = THIS_MODULE,
        .driver_name    = "mpc52xx_psc_uart",
        .dev_name       = "ttyPSC",
        .major          = SERIAL_PSC_MAJOR,
@@ -837,7 +851,7 @@
        if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
                return -EINVAL;
 
-       if (!mpc52xx_match_psc_function(idx,"uart"))
+       if (!mpc52xx_match_psc_function(idx, "uart"))
                return -ENODEV;
 
        /* Init the port structure */
@@ -848,13 +862,13 @@
        port->fifosize  = 512;
        port->iotype    = UPIO_MEM;
        port->flags     = UPF_BOOT_AUTOCONF |
-                         ( uart_console(port) ? 0 : UPF_IOREMAP );
+                         (uart_console(port) ? 0 : UPF_IOREMAP);
        port->line      = idx;
        port->ops       = &mpc52xx_uart_ops;
        port->dev       = &dev->dev;
 
        /* Search for IRQ and mapbase */
-       for (i=0 ; i<dev->num_resources ; i++, res++) {
+       for (i = 0 ; i < dev->num_resources ; i++, res++) {
                if (res->flags & IORESOURCE_MEM)
                        port->mapbase = res->start;
                else if (res->flags & IORESOURCE_IRQ)
@@ -866,7 +880,7 @@
        /* Add the port to the uart sub-system */
        ret = uart_add_one_port(&mpc52xx_uart_driver, port);
        if (!ret)
-               platform_set_drvdata(dev, (void*)port);
+               platform_set_drvdata(dev, (void *)port);
 
        return ret;
 }
@@ -917,6 +931,7 @@
        .resume         = mpc52xx_uart_resume,
 #endif
        .driver         = {
+               .owner  = THIS_MODULE,
                .name   = "mpc52xx-psc",
        },
 };
@@ -946,10 +961,11 @@
        if (idx >= MPC52xx_PSC_MAXNUM)
                return -EINVAL;
        pr_debug("Found %s assigned to ttyPSC%x\n",
-                mpc52xx_uart_nodes[idx]->full_name, idx);
+                mpc52xx_uart_nodes[idx]->full_name, idx);
 
        /* Search for bus-frequency property in this node or a parent */
-       if ((ipb_freq = mpc52xx_find_ipb_freq(op->node)) == 0) {
+       ipb_freq = mpc52xx_find_ipb_freq(op->node);
+       if (ipb_freq == 0) {
                dev_dbg(&op->dev, "Could not find IPB bus frequency!\n");
                return -EINVAL;
        }
@@ -962,22 +978,23 @@
        port->fifosize  = 512;
        port->iotype    = UPIO_MEM;
        port->flags     = UPF_BOOT_AUTOCONF |
-                         ( uart_console(port) ? 0 : UPF_IOREMAP );
+                         (uart_console(port) ? 0 : UPF_IOREMAP);
        port->line      = idx;
        port->ops       = &mpc52xx_uart_ops;
        port->dev       = &op->dev;
 
        /* Search for IRQ and mapbase */
-       if ((ret = of_address_to_resource(op->node, 0, &res)) != 0)
+       ret = of_address_to_resource(op->node, 0, &res);
+       if (ret)
                return ret;
 
        port->mapbase = res.start;
        port->irq = irq_of_parse_and_map(op->node, 0);
 
        dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
-               (void*)port->mapbase, port->irq, port->uartclk);
+               (void *)port->mapbase, port->irq, port->uartclk);
 
-       if ((port->irq==NO_IRQ) || !port->mapbase) {
+       if ((port->irq == NO_IRQ) || !port->mapbase) {
                printk(KERN_ERR "Could not allocate resources for PSC\n");
                return -EINVAL;
        }
@@ -985,7 +1002,7 @@
        /* Add the port to the uart sub-system */
        ret = uart_add_one_port(&mpc52xx_uart_driver, port);
        if (!ret)
-               dev_set_drvdata(&op->dev, (void*)port);
+               dev_set_drvdata(&op->dev, (void *)port);
 
        return ret;
 }
@@ -1048,6 +1065,7 @@
        if (idx < 0)
                return; /* No free slot; abort */
 
+       of_node_get(np);
        /* If the slot is already occupied, then swap slots */
        if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
                mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
@@ -1057,7 +1075,7 @@
 static void
 mpc52xx_uart_of_enumerate(void)
 {
-       static int enum_done = 0;
+       static int enum_done;
        struct device_node *np;
        const unsigned int *devno;
        int i;
@@ -1071,7 +1089,7 @@
 
                /* Is a particular device number requested? */
                devno = of_get_property(np, "port-number", NULL);
-               mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1);
+               mpc52xx_uart_of_assign(np, devno ? *devno : -1);
        }
 
        enum_done = 1;
@@ -1079,15 +1097,13 @@
        for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
                if (mpc52xx_uart_nodes[i])
                        pr_debug("%s assigned to ttyPSC%x\n",
-                                mpc52xx_uart_nodes[i]->full_name, i);
+                                mpc52xx_uart_nodes[i]->full_name, i);
        }
 }
 
 MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
 
 static struct of_platform_driver mpc52xx_uart_of_driver = {
-       .owner          = THIS_MODULE,
-       .name           = "mpc52xx-psc-uart",
        .match_table    = mpc52xx_uart_of_match,
        .probe          = mpc52xx_uart_of_probe,
        .remove         = mpc52xx_uart_of_remove,
@@ -1113,7 +1129,8 @@
 
        printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
 
-       if ((ret = uart_register_driver(&mpc52xx_uart_driver)) != 0) {
+       ret = uart_register_driver(&mpc52xx_uart_driver);
+       if (ret) {
                printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
                       __FILE__, ret);
                return ret;
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/serial/uartlite.c powerpc.git/drivers/serial/uartlite.c
--- linux-2.6.24/drivers/serial/uartlite.c      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/serial/uartlite.c       2008-01-28 20:26:19.000000000 +0100
@@ -539,7 +539,7 @@
  *
  * @dev: pointer to device structure
  */
-static int __devinit ulite_release(struct device *dev)
+static int __devexit ulite_release(struct device *dev)
 {
        struct uart_port *port = dev_get_drvdata(dev);
        int rc = 0;
@@ -572,14 +572,14 @@
        return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start);
 }
 
-static int ulite_remove(struct platform_device *pdev)
+static int __devexit ulite_remove(struct platform_device *pdev)
 {
        return ulite_release(&pdev->dev);
 }
 
 static struct platform_driver ulite_platform_driver = {
        .probe  = ulite_probe,
-       .remove = ulite_remove,
+       .remove = __devexit_p(ulite_remove),
        .driver = {
                   .owner = THIS_MODULE,
                   .name  = "uartlite",
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/serial/ucc_uart.c powerpc.git/drivers/serial/ucc_uart.c
--- linux-2.6.24/drivers/serial/ucc_uart.c      1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/drivers/serial/ucc_uart.c       2008-01-28 20:26:20.000000000 +0100
@@ -0,0 +1,1514 @@
+/*
+ * Freescale QUICC Engine UART device driver
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * This driver adds support for UART devices via Freescale's QUICC Engine
+ * found on some Freescale SOCs.
+ *
+ * If Soft-UART support is needed but not already present, then this driver
+ * will request and upload the "Soft-UART" microcode upon probe.  The
+ * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X"
+ * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC,
+ * (e.g. "11" for 1.1).
+ */
+
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/fs_uart_pd.h>
+#include <asm/ucc_slow.h>
+
+#include <linux/firmware.h>
+#include <asm/reg.h>
+
+/*
+ * The GUMR flag for Soft UART.  This would normally be defined in qe.h,
+ * but Soft-UART is a hack and we want to keep everything related to it in
+ * this file.
+ */
+#define UCC_SLOW_GUMR_H_SUART          0x00004000      /* Soft-UART */
+
+/*
+ * soft_uart is 1 if we need to use Soft-UART mode
+ */
+static int soft_uart;
+/*
+ * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise.
+ */
+static int firmware_loaded;
+
+/* Enable this macro to configure all serial ports in internal loopback
+   mode */
+/* #define LOOPBACK */
+
+/* The major and minor device numbers are defined in
+ * http://www.lanana.org/docs/device-list/devices-2.6+.txt.  For the QE
+ * UART, we have major number 204 and minor numbers 46 - 49, which are the
+ * same as for the CPM2.  This decision was made because no Freescale part
+ * has both a CPM and a QE.
+ */
+#define SERIAL_QE_MAJOR 204
+#define SERIAL_QE_MINOR 46
+
+/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */
+#define UCC_MAX_UART    4
+
+/* The number of buffer descriptors for receiving characters. */
+#define RX_NUM_FIFO     4
+
+/* The number of buffer descriptors for transmitting characters. */
+#define TX_NUM_FIFO     4
+
+/* The maximum size of the character buffer for a single RX BD. */
+#define RX_BUF_SIZE     32
+
+/* The maximum size of the character buffer for a single TX BD. */
+#define TX_BUF_SIZE     32
+
+/*
+ * The number of jiffies to wait after receiving a close command before the
+ * device is actually closed.  This allows the last few characters to be
+ * sent over the wire.
+ */
+#define UCC_WAIT_CLOSING 100
+
+struct ucc_uart_pram {
+       struct ucc_slow_pram common;
+       u8 res1[8];             /* reserved */
+       __be16 maxidl;          /* Maximum idle chars */
+       __be16 idlc;            /* temp idle counter */
+       __be16 brkcr;           /* Break count register */
+       __be16 parec;           /* receive parity error counter */
+       __be16 frmec;           /* receive framing error counter */
+       __be16 nosec;           /* receive noise counter */
+       __be16 brkec;           /* receive break condition counter */
+       __be16 brkln;           /* last received break length */
+       __be16 uaddr[2];        /* UART address character 1 & 2 */
+       __be16 rtemp;           /* Temp storage */
+       __be16 toseq;           /* Transmit out of sequence char */
+       __be16 cchars[8];       /* control characters 1-8 */
+       __be16 rccm;            /* receive control character mask */
+       __be16 rccr;            /* receive control character register */
+       __be16 rlbc;            /* receive last break character */
+       __be16 res2;            /* reserved */
+       __be32 res3;            /* reserved, should be cleared */
+       u8 res4;                /* reserved, should be cleared */
+       u8 res5[3];             /* reserved, should be cleared */
+       __be32 res6;            /* reserved, should be cleared */
+       __be32 res7;            /* reserved, should be cleared */
+       __be32 res8;            /* reserved, should be cleared */
+       __be32 res9;            /* reserved, should be cleared */
+       __be32 res10;           /* reserved, should be cleared */
+       __be32 res11;           /* reserved, should be cleared */
+       __be32 res12;           /* reserved, should be cleared */
+       __be32 res13;           /* reserved, should be cleared */
+/* The rest is for Soft-UART only */
+       __be16 supsmr;          /* 0x90, Shadow UPSMR */
+       __be16 res92;           /* 0x92, reserved, initialize to 0 */
+       __be32 rx_state;        /* 0x94, RX state, initialize to 0 */
+       __be32 rx_cnt;          /* 0x98, RX count, initialize to 0 */
+       u8 rx_length;           /* 0x9C, Char length, set to 1+CL+PEN+1+SL */
+       u8 rx_bitmark;          /* 0x9D, reserved, initialize to 0 */
+       u8 rx_temp_dlst_qe;     /* 0x9E, reserved, initialize to 0 */
+       u8 res14[0xBC - 0x9F];  /* reserved */
+       __be32 dump_ptr;        /* 0xBC, Dump pointer */
+       __be32 rx_frame_rem;    /* 0xC0, reserved, initialize to 0 */
+       u8 rx_frame_rem_size;   /* 0xC4, reserved, initialize to 0 */
+       u8 tx_mode;             /* 0xC5, mode, 0=AHDLC, 1=UART */
+       __be16 tx_state;        /* 0xC6, TX state */
+       u8 res15[0xD0 - 0xC8];  /* reserved */
+       __be32 resD0;           /* 0xD0, reserved, initialize to 0 */
+       u8 resD4;               /* 0xD4, reserved, initialize to 0 */
+       __be16 resD5;           /* 0xD5, reserved, initialize to 0 */
+} __attribute__ ((packed));
+
+/* SUPSMR definitions, for Soft-UART only */
+#define UCC_UART_SUPSMR_SL             0x8000
+#define UCC_UART_SUPSMR_RPM_MASK       0x6000
+#define UCC_UART_SUPSMR_RPM_ODD        0x0000
+#define UCC_UART_SUPSMR_RPM_LOW        0x2000
+#define UCC_UART_SUPSMR_RPM_EVEN       0x4000
+#define UCC_UART_SUPSMR_RPM_HIGH       0x6000
+#define UCC_UART_SUPSMR_PEN            0x1000
+#define UCC_UART_SUPSMR_TPM_MASK       0x0C00
+#define UCC_UART_SUPSMR_TPM_ODD        0x0000
+#define UCC_UART_SUPSMR_TPM_LOW        0x0400
+#define UCC_UART_SUPSMR_TPM_EVEN       0x0800
+#define UCC_UART_SUPSMR_TPM_HIGH       0x0C00
+#define UCC_UART_SUPSMR_FRZ            0x0100
+#define UCC_UART_SUPSMR_UM_MASK        0x00c0
+#define UCC_UART_SUPSMR_UM_NORMAL       0x0000
+#define UCC_UART_SUPSMR_UM_MAN_MULTI    0x0040
+#define UCC_UART_SUPSMR_UM_AUTO_MULTI   0x00c0
+#define UCC_UART_SUPSMR_CL_MASK        0x0030
+#define UCC_UART_SUPSMR_CL_8           0x0030
+#define UCC_UART_SUPSMR_CL_7           0x0020
+#define UCC_UART_SUPSMR_CL_6           0x0010
+#define UCC_UART_SUPSMR_CL_5           0x0000
+
+#define UCC_UART_TX_STATE_AHDLC        0x00
+#define UCC_UART_TX_STATE_UART         0x01
+#define UCC_UART_TX_STATE_X1           0x00
+#define UCC_UART_TX_STATE_X16          0x80
+
+#define UCC_UART_PRAM_ALIGNMENT 0x100
+
+#define UCC_UART_SIZE_OF_BD     UCC_SLOW_SIZE_OF_BD
+#define NUM_CONTROL_CHARS       8
+
+/* Private per-port data structure */
+struct uart_qe_port {
+       struct uart_port port;
+       struct ucc_slow __iomem *uccp;
+       struct ucc_uart_pram __iomem *uccup;
+       struct ucc_slow_info us_info;
+       struct ucc_slow_private *us_private;
+       struct device_node *np;
+       unsigned int ucc_num;   /* First ucc is 0, not 1 */
+
+       u16 rx_nrfifos;
+       u16 rx_fifosize;
+       u16 tx_nrfifos;
+       u16 tx_fifosize;
+       int wait_closing;
+       u32 flags;
+       struct qe_bd *rx_bd_base;
+       struct qe_bd *rx_cur;
+       struct qe_bd *tx_bd_base;
+       struct qe_bd *tx_cur;
+       unsigned char *tx_buf;
+       unsigned char *rx_buf;
+       void *bd_virt;          /* virtual address of the BD buffers */
+       dma_addr_t bd_dma_addr; /* bus address of the BD buffers */
+       unsigned int bd_size;   /* size of BD buffer space */
+};
+
+static struct uart_driver ucc_uart_driver = {
+       .owner          = THIS_MODULE,
+       .driver_name    = "serial",
+       .dev_name       = "ttyQE",
+       .major          = SERIAL_QE_MAJOR,
+       .minor          = SERIAL_QE_MINOR,
+       .nr             = UCC_MAX_UART,
+};
+
+/*
+ * Virtual to physical address translation.
+ *
+ * Given the virtual address for a character buffer, this function returns
+ * the physical (DMA) equivalent.
+ */
+static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port)
+{
+       if (likely((addr >= qe_port->bd_virt)) &&
+           (addr < (qe_port->bd_virt + qe_port->bd_size)))
+               return qe_port->bd_dma_addr + (addr - qe_port->bd_virt);
+
+       /* something nasty happened */
+       printk(KERN_ERR "%s: addr=%p\n", __FUNCTION__, addr);
+       BUG();
+       return 0;
+}
+
+/*
+ * Physical to virtual address translation.
+ *
+ * Given the physical (DMA) address for a character buffer, this function
+ * returns the virtual equivalent.
+ */
+static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
+{
+       /* sanity check */
+       if (likely((addr >= qe_port->bd_dma_addr) &&
+                  (addr < (qe_port->bd_dma_addr + qe_port->bd_size))))
+               return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
+
+       /* something nasty happened */
+       printk(KERN_ERR "%s: addr=%x\n", __FUNCTION__, addr);
+       BUG();
+       return NULL;
+}
+
+/*
+ * Return 1 if the QE is done transmitting all buffers for this port
+ *
+ * This function scans each BD in sequence.  If we find a BD that is not
+ * ready (READY=1), then we return 0 indicating that the QE is still sending
+ * data.  If we reach the last BD (WRAP=1), then we know we've scanned
+ * the entire list, and all BDs are done.
+ */
+static unsigned int qe_uart_tx_empty(struct uart_port *port)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+       struct qe_bd *bdp = qe_port->tx_bd_base;
+
+       while (1) {
+               if (in_be16(&bdp->status) & BD_SC_READY)
+                       /* This BD is not done, so return "not done" */
+                       return 0;
+
+               if (in_be16(&bdp->status) & BD_SC_WRAP)
+                       /*
+                        * This BD is done and it's the last one, so return
+                        * "done"
+                        */
+                       return 1;
+
+               bdp++;
+       };
+}
+
+/*
+ * Set the modem control lines
+ *
+ * Although the QE can control the modem control lines (e.g. CTS), we
+ * don't need that support. This function must exist, however, otherwise
+ * the kernel will panic.
+ */
+void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/*
+ * Get the current modem control line status
+ *
+ * Although the QE can control the modem control lines (e.g. CTS), this
+ * driver currently doesn't support that, so we always return Carrier
+ * Detect, Data Set Ready, and Clear To Send.
+ */
+static unsigned int qe_uart_get_mctrl(struct uart_port *port)
+{
+       return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/*
+ * Disable the transmit interrupt.
+ *
+ * Although this function is called "stop_tx", it does not actually stop
+ * transmission of data.  Instead, it tells the QE to not generate an
+ * interrupt when the UCC is finished sending characters.
+ */
+static void qe_uart_stop_tx(struct uart_port *port)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+
+       clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+}
+
+/*
+ * Transmit as many characters to the HW as possible.
+ *
+ * This function will attempt to stuff of all the characters from the
+ * kernel's transmit buffer into TX BDs.
+ *
+ * A return value of non-zero indicates that it sucessfully stuffed all
+ * characters from the kernel buffer.
+ *
+ * A return value of zero indicates that there are still characters in the
+ * kernel's buffer that have not been transmitted, but there are no more BDs
+ * available.  This function should be called again after a BD has been made
+ * available.
+ */
+static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
+{
+       struct qe_bd *bdp;
+       unsigned char *p;
+       unsigned int count;
+       struct uart_port *port = &qe_port->port;
+       struct circ_buf *xmit = &port->info->xmit;
+
+       bdp = qe_port->rx_cur;
+
+       /* Handle xon/xoff */
+       if (port->x_char) {
+               /* Pick next descriptor and fill from buffer */
+               bdp = qe_port->tx_cur;
+
+               p = qe2cpu_addr(bdp->buf, qe_port);
+
+               *p++ = port->x_char;
+               out_be16(&bdp->length, 1);
+               setbits16(&bdp->status, BD_SC_READY);
+               /* Get next BD. */
+               if (in_be16(&bdp->status) & BD_SC_WRAP)
+                       bdp = qe_port->tx_bd_base;
+               else
+                       bdp++;
+               qe_port->tx_cur = bdp;
+
+               port->icount.tx++;
+               port->x_char = 0;
+               return 1;
+       }
+
+       if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+               qe_uart_stop_tx(port);
+               return 0;
+       }
+
+       /* Pick next descriptor and fill from buffer */
+       bdp = qe_port->tx_cur;
+
+       while (!(in_be16(&bdp->status) & BD_SC_READY) &&
+              (xmit->tail != xmit->head)) {
+               count = 0;
+               p = qe2cpu_addr(bdp->buf, qe_port);
+               while (count < qe_port->tx_fifosize) {
+                       *p++ = xmit->buf[xmit->tail];
+                       xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                       port->icount.tx++;
+                       count++;
+                       if (xmit->head == xmit->tail)
+                               break;
+               }
+
+               out_be16(&bdp->length, count);
+               setbits16(&bdp->status, BD_SC_READY);
+
+               /* Get next BD. */
+               if (in_be16(&bdp->status) & BD_SC_WRAP)
+                       bdp = qe_port->tx_bd_base;
+               else
+                       bdp++;
+       }
+       qe_port->tx_cur = bdp;
+
+       if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+               uart_write_wakeup(port);
+
+       if (uart_circ_empty(xmit)) {
+               /* The kernel buffer is empty, so turn off TX interrupts.  We
+                  don't need to be told when the QE is finished transmitting
+                  the data. */
+               qe_uart_stop_tx(port);
+               return 0;
+       }
+
+       return 1;
+}
+
+/*
+ * Start transmitting data
+ *
+ * This function will start transmitting any available data, if the port
+ * isn't already transmitting data.
+ */
+static void qe_uart_start_tx(struct uart_port *port)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+
+       /* If we currently are transmitting, then just return */
+       if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
+               return;
+
+       /* Otherwise, pump the port and start transmission */
+       if (qe_uart_tx_pump(qe_port))
+               setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+}
+
+/*
+ * Stop transmitting data
+ */
+static void qe_uart_stop_rx(struct uart_port *port)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+
+       clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+}
+
+/*
+ * Enable status change interrupts
+ *
+ * We don't support status change interrupts, but we need to define this
+ * function otherwise the kernel will panic.
+ */
+static void qe_uart_enable_ms(struct uart_port *port)
+{
+}
+
+/* Start or stop sending  break signal
+ *
+ * This function controls the sending of a break signal.  If break_state=1,
+ * then we start sending a break signal.  If break_state=0, then we stop
+ * sending the break signal.
+ */
+static void qe_uart_break_ctl(struct uart_port *port, int break_state)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+
+       if (break_state)
+               ucc_slow_stop_tx(qe_port->us_private);
+       else
+               ucc_slow_restart_tx(qe_port->us_private);
+}
+
+/* ISR helper function for receiving character.
+ *
+ * This function is called by the ISR to handling receiving characters
+ */
+static void qe_uart_int_rx(struct uart_qe_port *qe_port)
+{
+       int i;
+       unsigned char ch, *cp;
+       struct uart_port *port = &qe_port->port;
+       struct tty_struct *tty = port->info->tty;
+       struct qe_bd *bdp;
+       u16 status;
+       unsigned int flg;
+
+       /* Just loop through the closed BDs and copy the characters into
+        * the buffer.
+        */
+       bdp = qe_port->rx_cur;
+       while (1) {
+               status = in_be16(&bdp->status);
+
+               /* If this one is empty, then we assume we've read them all */
+               if (status & BD_SC_EMPTY)
+                       break;
+
+               /* get number of characters, and check space in RX buffer */
+               i = in_be16(&bdp->length);
+
+               /* If we don't have enough room in RX buffer for the entire BD,
+                * then we try later, which will be the next RX interrupt.
+                */
+               if (tty_buffer_request_room(tty, i) < i) {
+                       dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n");
+                       return;
+               }
+
+               /* get pointer */
+               cp = qe2cpu_addr(bdp->buf, qe_port);
+
+               /* loop through the buffer */
+               while (i-- > 0) {
+                       ch = *cp++;
+                       port->icount.rx++;
+                       flg = TTY_NORMAL;
+
+                       if (!i && status &
+                           (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
+                               goto handle_error;
+                       if (uart_handle_sysrq_char(port, ch))
+                               continue;
+
+error_return:
+                       tty_insert_flip_char(tty, ch, flg);
+
+               }
+
+               /* This BD is ready to be used again. Clear status. get next */
+               clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR |
+                       BD_SC_OV | BD_SC_ID, BD_SC_EMPTY);
+               if (in_be16(&bdp->status) & BD_SC_WRAP)
+                       bdp = qe_port->rx_bd_base;
+               else
+                       bdp++;
+
+       }
+
+       /* Write back buffer pointer */
+       qe_port->rx_cur = bdp;
+
+       /* Activate BH processing */
+       tty_flip_buffer_push(tty);
+
+       return;
+
+       /* Error processing */
+
+handle_error:
+       /* Statistics */
+       if (status & BD_SC_BR)
+               port->icount.brk++;
+       if (status & BD_SC_PR)
+               port->icount.parity++;
+       if (status & BD_SC_FR)
+               port->icount.frame++;
+       if (status & BD_SC_OV)
+               port->icount.overrun++;
+
+       /* Mask out ignored conditions */
+       status &= port->read_status_mask;
+
+       /* Handle the remaining ones */
+       if (status & BD_SC_BR)
+               flg = TTY_BREAK;
+       else if (status & BD_SC_PR)
+               flg = TTY_PARITY;
+       else if (status & BD_SC_FR)
+               flg = TTY_FRAME;
+
+       /* Overrun does not affect the current character ! */
+       if (status & BD_SC_OV)
+               tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+#ifdef SUPPORT_SYSRQ
+       port->sysrq = 0;
+#endif
+       goto error_return;
+}
+
+/* Interrupt handler
+ *
+ * This interrupt handler is called after a BD is processed.
+ */
+static irqreturn_t qe_uart_int(int irq, void *data)
+{
+       struct uart_qe_port *qe_port = (struct uart_qe_port *) data;
+       struct ucc_slow __iomem *uccp = qe_port->uccp;
+       u16 events;
+
+       /* Clear the interrupts */
+       events = in_be16(&uccp->ucce);
+       out_be16(&uccp->ucce, events);
+
+       if (events & UCC_UART_UCCE_BRKE)
+               uart_handle_break(&qe_port->port);
+
+       if (events & UCC_UART_UCCE_RX)
+               qe_uart_int_rx(qe_port);
+
+       if (events & UCC_UART_UCCE_TX)
+               qe_uart_tx_pump(qe_port);
+
+       return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/* Initialize buffer descriptors
+ *
+ * This function initializes all of the RX and TX buffer descriptors.
+ */
+static void qe_uart_initbd(struct uart_qe_port *qe_port)
+{
+       int i;
+       void *bd_virt;
+       struct qe_bd *bdp;
+
+       /* Set the physical address of the host memory buffers in the buffer
+        * descriptors, and the virtual address for us to work with.
+        */
+       bd_virt = qe_port->bd_virt;
+       bdp = qe_port->rx_bd_base;
+       qe_port->rx_cur = qe_port->rx_bd_base;
+       for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
+               out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT);
+               out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+               out_be16(&bdp->length, 0);
+               bd_virt += qe_port->rx_fifosize;
+               bdp++;
+       }
+
+       /* */
+       out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
+       out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+       out_be16(&bdp->length, 0);
+
+       /* Set the physical address of the host memory
+        * buffers in the buffer descriptors, and the
+        * virtual address for us to work with.
+        */
+       bd_virt = qe_port->bd_virt +
+               L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
+       qe_port->tx_cur = qe_port->tx_bd_base;
+       bdp = qe_port->tx_bd_base;
+       for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
+               out_be16(&bdp->status, BD_SC_INTRPT);
+               out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+               out_be16(&bdp->length, 0);
+               bd_virt += qe_port->tx_fifosize;
+               bdp++;
+       }
+
+       /* Loopback requires the preamble bit to be set on the first TX BD */
+#ifdef LOOPBACK
+       setbits16(&qe_port->tx_cur->status, BD_SC_P);
+#endif
+
+       out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT);
+       out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+       out_be16(&bdp->length, 0);
+}
+
+/*
+ * Initialize a UCC for UART.
+ *
+ * This function configures a given UCC to be used as a UART device. Basic
+ * UCC initialization is handled in qe_uart_request_port().  This function
+ * does all the UART-specific stuff.
+ */
+static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
+{
+       u32 cecr_subblock;
+       struct ucc_slow __iomem *uccp = qe_port->uccp;
+       struct ucc_uart_pram *uccup = qe_port->uccup;
+
+       unsigned int i;
+
+       /* First, disable TX and RX in the UCC */
+       ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
+
+       /* Program the UCC UART parameter RAM */
+       out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
+       out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
+       out_be16(&uccup->common.mrblr, qe_port->rx_fifosize);
+       out_be16(&uccup->maxidl, 0x10);
+       out_be16(&uccup->brkcr, 1);
+       out_be16(&uccup->parec, 0);
+       out_be16(&uccup->frmec, 0);
+       out_be16(&uccup->nosec, 0);
+       out_be16(&uccup->brkec, 0);
+       out_be16(&uccup->uaddr[0], 0);
+       out_be16(&uccup->uaddr[1], 0);
+       out_be16(&uccup->toseq, 0);
+       for (i = 0; i < 8; i++)
+               out_be16(&uccup->cchars[i], 0xC000);
+       out_be16(&uccup->rccm, 0xc0ff);
+
+       /* Configure the GUMR registers for UART */
+       if (soft_uart)
+               /* Soft-UART requires a 1X multiplier for TX */
+               clrsetbits_be32(&uccp->gumr_l,
+                       UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
+                       UCC_SLOW_GUMR_L_RDCR_MASK,
+                       UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
+                       UCC_SLOW_GUMR_L_RDCR_16);
+       else
+               clrsetbits_be32(&uccp->gumr_l,
+                       UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
+                       UCC_SLOW_GUMR_L_RDCR_MASK,
+                       UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
+                       UCC_SLOW_GUMR_L_RDCR_16);
+
+       clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
+               UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+
+#ifdef LOOPBACK
+       clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+               UCC_SLOW_GUMR_L_DIAG_LOOP);
+       clrsetbits_be32(&uccp->gumr_h,
+               UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
+               UCC_SLOW_GUMR_H_CDS);
+#endif
+
+       /* Enable rx interrupts  and clear all pending events.  */
+       out_be16(&uccp->uccm, 0);
+       out_be16(&uccp->ucce, 0xffff);
+       out_be16(&uccp->udsr, 0x7e7e);
+
+       /* Initialize UPSMR */
+       out_be16(&uccp->upsmr, 0);
+
+       if (soft_uart) {
+               out_be16(&uccup->supsmr, 0x30);
+               out_be16(&uccup->res92, 0);
+               out_be32(&uccup->rx_state, 0);
+               out_be32(&uccup->rx_cnt, 0);
+               out_8(&uccup->rx_bitmark, 0);
+               out_8(&uccup->rx_length, 10);
+               out_be32(&uccup->dump_ptr, 0x4000);
+               out_8(&uccup->rx_temp_dlst_qe, 0);
+               out_be32(&uccup->rx_frame_rem, 0);
+               out_8(&uccup->rx_frame_rem_size, 0);
+               /* Soft-UART requires TX to be 1X */
+               out_8(&uccup->tx_mode,
+                       UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1);
+               out_be16(&uccup->tx_state, 0);
+               out_8(&uccup->resD4, 0);
+               out_be16(&uccup->resD5, 0);
+
+               /* Set UART mode.
+                * Enable receive and transmit.
+                */
+
+               /* From the microcode errata:
+                * 1.GUMR_L register, set mode=0010 (QMC).
+                * 2.Set GUMR_H[17] bit. (UART/AHDLC mode).
+                * 3.Set GUMR_H[19:20] (Transparent mode)
+                * 4.Clear GUMR_H[26] (RFW)
+                * ...
+                * 6.Receiver must use 16x over sampling
+                */
+               clrsetbits_be32(&uccp->gumr_l,
+                       UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
+                       UCC_SLOW_GUMR_L_RDCR_MASK,
+                       UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 |
+                       UCC_SLOW_GUMR_L_RDCR_16);
+
+               clrsetbits_be32(&uccp->gumr_h,
+                       UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
+                       UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX |
+                       UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
+
+#ifdef LOOPBACK
+               clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+                               UCC_SLOW_GUMR_L_DIAG_LOOP);
+               clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP |
+                         UCC_SLOW_GUMR_H_CDS);
+#endif
+
+               cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
+               qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
+                       QE_CR_PROTOCOL_UNSPECIFIED, 0);
+       }
+}
+
+/*
+ * Initialize the port.
+ */
+static int qe_uart_startup(struct uart_port *port)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+       int ret;
+
+       /*
+        * If we're using Soft-UART mode, then we need to make sure the
+        * firmware has been uploaded first.
+        */
+       if (soft_uart && !firmware_loaded) {
+               dev_err(port->dev, "Soft-UART firmware not uploaded\n");
+               return -ENODEV;
+       }
+
+       qe_uart_initbd(qe_port);
+       qe_uart_init_ucc(qe_port);
+
+       /* Install interrupt handler. */
+       ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart",
+               qe_port);
+       if (ret) {
+               dev_err(port->dev, "could not claim IRQ %u\n", port->irq);
+               return ret;
+       }
+
+       /* Startup rx-int */
+       setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+       ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX);
+
+       return 0;
+}
+
+/*
+ * Shutdown the port.
+ */
+static void qe_uart_shutdown(struct uart_port *port)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+       struct ucc_slow __iomem *uccp = qe_port->uccp;
+       unsigned int timeout = 20;
+
+       /* Disable RX and TX */
+
+       /* Wait for all the BDs marked sent */
+       while (!qe_uart_tx_empty(port)) {
+               if (!--timeout) {
+                       dev_warn(port->dev, "shutdown timeout\n");
+                       break;
+               }
+               set_current_state(TASK_UNINTERRUPTIBLE);
+               schedule_timeout(2);
+       }
+
+       if (qe_port->wait_closing) {
+               /* Wait a bit longer */
+               set_current_state(TASK_UNINTERRUPTIBLE);
+               schedule_timeout(qe_port->wait_closing);
+       }
+
+       /* Stop uarts */
+       ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
+       clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
+
+       /* Shut them really down and reinit buffer descriptors */
+       ucc_slow_graceful_stop_tx(qe_port->us_private);
+       qe_uart_initbd(qe_port);
+
+       free_irq(port->irq, qe_port);
+}
+
+/*
+ * Set the serial port parameters.
+ */
+static void qe_uart_set_termios(struct uart_port *port,
+                               struct ktermios *termios, struct ktermios *old)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+       struct ucc_slow __iomem *uccp = qe_port->uccp;
+       unsigned int baud;
+       unsigned long flags;
+       u16 upsmr = in_be16(&uccp->upsmr);
+       struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
+       u16 supsmr = in_be16(&uccup->supsmr);
+       u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */
+
+       /* Character length programmed into the mode register is the
+        * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
+        * 1 or 2 stop bits, minus 1.
+        * The value 'bits' counts this for us.
+        */
+
+       /* byte size */
+       upsmr &= UCC_UART_UPSMR_CL_MASK;
+       supsmr &= UCC_UART_SUPSMR_CL_MASK;
+
+       switch (termios->c_cflag & CSIZE) {
+       case CS5:
+               upsmr |= UCC_UART_UPSMR_CL_5;
+               supsmr |= UCC_UART_SUPSMR_CL_5;
+               char_length += 5;
+               break;
+       case CS6:
+               upsmr |= UCC_UART_UPSMR_CL_6;
+               supsmr |= UCC_UART_SUPSMR_CL_6;
+               char_length += 6;
+               break;
+       case CS7:
+               upsmr |= UCC_UART_UPSMR_CL_7;
+               supsmr |= UCC_UART_SUPSMR_CL_7;
+               char_length += 7;
+               break;
+       default:        /* case CS8 */
+               upsmr |= UCC_UART_UPSMR_CL_8;
+               supsmr |= UCC_UART_SUPSMR_CL_8;
+               char_length += 8;
+               break;
+       }
+
+       /* If CSTOPB is set, we want two stop bits */
+       if (termios->c_cflag & CSTOPB) {
+               upsmr |= UCC_UART_UPSMR_SL;
+               supsmr |= UCC_UART_SUPSMR_SL;
+               char_length++;  /* + SL */
+       }
+
+       if (termios->c_cflag & PARENB) {
+               upsmr |= UCC_UART_UPSMR_PEN;
+               supsmr |= UCC_UART_SUPSMR_PEN;
+               char_length++;  /* + PEN */
+
+               if (!(termios->c_cflag & PARODD)) {
+                       upsmr &= ~(UCC_UART_UPSMR_RPM_MASK |
+                                  UCC_UART_UPSMR_TPM_MASK);
+                       upsmr |= UCC_UART_UPSMR_RPM_EVEN |
+                               UCC_UART_UPSMR_TPM_EVEN;
+                       supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK |
+                                   UCC_UART_SUPSMR_TPM_MASK);
+                       supsmr |= UCC_UART_SUPSMR_RPM_EVEN |
+                               UCC_UART_SUPSMR_TPM_EVEN;
+               }
+       }
+
+       /*
+        * Set up parity check flag
+        */
+       port->read_status_mask = BD_SC_EMPTY | BD_SC_OV;
+       if (termios->c_iflag & INPCK)
+               port->read_status_mask |= BD_SC_FR | BD_SC_PR;
+       if (termios->c_iflag & (BRKINT | PARMRK))
+               port->read_status_mask |= BD_SC_BR;
+
+       /*
+        * Characters to ignore
+        */
+       port->ignore_status_mask = 0;
+       if (termios->c_iflag & IGNPAR)
+               port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
+       if (termios->c_iflag & IGNBRK) {
+               port->ignore_status_mask |= BD_SC_BR;
+               /*
+                * If we're ignore parity and break indicators, ignore
+                * overruns too.  (For real raw support).
+                */
+               if (termios->c_iflag & IGNPAR)
+                       port->ignore_status_mask |= BD_SC_OV;
+       }
+       /*
+        * !!! ignore all characters if CREAD is not set
+        */
+       if ((termios->c_cflag & CREAD) == 0)
+               port->read_status_mask &= ~BD_SC_EMPTY;
+
+       baud = uart_get_baud_rate(port, termios, old, 0, 115200);
+
+       /* Do we really need a spinlock here? */
+       spin_lock_irqsave(&port->lock, flags);
+
+       out_be16(&uccp->upsmr, upsmr);
+       if (soft_uart) {
+               out_be16(&uccup->supsmr, supsmr);
+               out_8(&uccup->rx_length, char_length);
+
+               /* Soft-UART requires a 1X multiplier for TX */
+               qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
+               qe_setbrg(qe_port->us_info.tx_clock, baud, 1);
+       } else {
+               qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
+               qe_setbrg(qe_port->us_info.tx_clock, baud, 16);
+       }
+
+       spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * Return a pointer to a string that describes what kind of port this is.
+ */
+static const char *qe_uart_type(struct uart_port *port)
+{
+       return "QE";
+}
+
+/*
+ * Allocate any memory and I/O resources required by the port.
+ */
+static int qe_uart_request_port(struct uart_port *port)
+{
+       int ret;
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+       struct ucc_slow_info *us_info = &qe_port->us_info;
+       struct ucc_slow_private *uccs;
+       unsigned int rx_size, tx_size;
+       void *bd_virt;
+       dma_addr_t bd_dma_addr = 0;
+
+       ret = ucc_slow_init(us_info, &uccs);
+       if (ret) {
+               dev_err(port->dev, "could not initialize UCC%u\n",
+                      qe_port->ucc_num);
+               return ret;
+       }
+
+       qe_port->us_private = uccs;
+       qe_port->uccp = uccs->us_regs;
+       qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram;
+       qe_port->rx_bd_base = uccs->rx_bd;
+       qe_port->tx_bd_base = uccs->tx_bd;
+
+       /*
+        * Allocate the transmit and receive data buffers.
+        */
+
+       rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
+       tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize);
+
+       bd_virt = dma_alloc_coherent(NULL, rx_size + tx_size, &bd_dma_addr,
+               GFP_KERNEL);
+       if (!bd_virt) {
+               dev_err(port->dev, "could not allocate buffer descriptors\n");
+               return -ENOMEM;
+       }
+
+       qe_port->bd_virt = bd_virt;
+       qe_port->bd_dma_addr = bd_dma_addr;
+       qe_port->bd_size = rx_size + tx_size;
+
+       qe_port->rx_buf = bd_virt;
+       qe_port->tx_buf = qe_port->rx_buf + rx_size;
+
+       return 0;
+}
+
+/*
+ * Configure the port.
+ *
+ * We say we're a CPM-type port because that's mostly true.  Once the device
+ * is configured, this driver operates almost identically to the CPM serial
+ * driver.
+ */
+static void qe_uart_config_port(struct uart_port *port, int flags)
+{
+       if (flags & UART_CONFIG_TYPE) {
+               port->type = PORT_CPM;
+               qe_uart_request_port(port);
+       }
+}
+
+/*
+ * Release any memory and I/O resources that were allocated in
+ * qe_uart_request_port().
+ */
+static void qe_uart_release_port(struct uart_port *port)
+{
+       struct uart_qe_port *qe_port =
+               container_of(port, struct uart_qe_port, port);
+       struct ucc_slow_private *uccs = qe_port->us_private;
+
+       dma_free_coherent(NULL, qe_port->bd_size, qe_port->bd_virt,
+                         qe_port->bd_dma_addr);
+
+       ucc_slow_free(uccs);
+}
+
+/*
+ * Verify that the data in serial_struct is suitable for this device.
+ */
+static int qe_uart_verify_port(struct uart_port *port,
+                              struct serial_struct *ser)
+{
+       if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
+               return -EINVAL;
+
+       if (ser->irq < 0 || ser->irq >= NR_IRQS)
+               return -EINVAL;
+
+       if (ser->baud_base < 9600)
+               return -EINVAL;
+
+       return 0;
+}
+/* UART operations
+ *
+ * Details on these functions can be found in Documentation/serial/driver
+ */
+static struct uart_ops qe_uart_pops = {
+       .tx_empty       = qe_uart_tx_empty,
+       .set_mctrl      = qe_uart_set_mctrl,
+       .get_mctrl      = qe_uart_get_mctrl,
+       .stop_tx        = qe_uart_stop_tx,
+       .start_tx       = qe_uart_start_tx,
+       .stop_rx        = qe_uart_stop_rx,
+       .enable_ms      = qe_uart_enable_ms,
+       .break_ctl      = qe_uart_break_ctl,
+       .startup        = qe_uart_startup,
+       .shutdown       = qe_uart_shutdown,
+       .set_termios    = qe_uart_set_termios,
+       .type           = qe_uart_type,
+       .release_port   = qe_uart_release_port,
+       .request_port   = qe_uart_request_port,
+       .config_port    = qe_uart_config_port,
+       .verify_port    = qe_uart_verify_port,
+};
+
+/*
+ * Obtain the SOC model number and revision level
+ *
+ * This function parses the device tree to obtain the SOC model.  It then
+ * reads the SVR register to the revision.
+ *
+ * The device tree stores the SOC model two different ways.
+ *
+ * The new way is:
+ *
+ *             cpu@0 {
+ *                     compatible = "PowerPC,8323";
+ *                     device_type = "cpu";
+ *                     ...
+ *
+ *
+ * The old way is:
+ *              PowerPC,8323@0 {
+ *                     device_type = "cpu";
+ *                     ...
+ *
+ * This code first checks the new way, and then the old way.
+ */
+static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
+{
+       struct device_node *np;
+       const char *soc_string;
+       unsigned int svr;
+       unsigned int soc;
+
+       /* Find the CPU node */
+       np = of_find_node_by_type(NULL, "cpu");
+       if (!np)
+               return 0;
+       /* Find the compatible property */
+       soc_string = of_get_property(np, "compatible", NULL);
+       if (!soc_string)
+               /* No compatible property, so try the name. */
+               soc_string = np->name;
+
+       /* Extract the SOC number from the "PowerPC," string */
+       if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
+               return 0;
+
+       /* Get the revision from the SVR */
+       svr = mfspr(SPRN_SVR);
+       *rev_h = (svr >> 4) & 0xf;
+       *rev_l = svr & 0xf;
+
+       return soc;
+}
+
+/*
+ * requst_firmware_nowait() callback function
+ *
+ * This function is called by the kernel when a firmware is made available,
+ * or if it times out waiting for the firmware.
+ */
+static void uart_firmware_cont(const struct firmware *fw, void *context)
+{
+       struct qe_firmware *firmware;
+       struct device *dev = context;
+       int ret;
+
+       if (!fw) {
+               dev_err(dev, "firmware not found\n");
+               return;
+       }
+
+       firmware = (struct qe_firmware *) fw->data;
+
+       if (firmware->header.length != fw->size) {
+               dev_err(dev, "invalid firmware\n");
+               return;
+       }
+
+       ret = qe_upload_firmware(firmware);
+       if (ret) {
+               dev_err(dev, "could not load firmware\n");
+               return;
+       }
+
+       firmware_loaded = 1;
+}
+
+static int ucc_uart_probe(struct of_device *ofdev,
+       const struct of_device_id *match)
+{
+       struct device_node *np = ofdev->node;
+       const unsigned int *iprop;      /* Integer OF properties */
+       const char *sprop;      /* String OF properties */
+       struct uart_qe_port *qe_port = NULL;
+       struct resource res;
+       int ret;
+
+       /*
+        * Determine if we need Soft-UART mode
+        */
+       if (of_find_property(np, "soft-uart", NULL)) {
+               dev_dbg(&ofdev->dev, "using Soft-UART mode\n");
+               soft_uart = 1;
+       }
+
+       /*
+        * If we are using Soft-UART, determine if we need to upload the
+        * firmware, too.
+        */
+       if (soft_uart) {
+               struct qe_firmware_info *qe_fw_info;
+
+               qe_fw_info = qe_get_firmware_info();
+
+               /* Check if the firmware has been uploaded. */
+               if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) {
+                       firmware_loaded = 1;
+               } else {
+                       char filename[32];
+                       unsigned int soc;
+                       unsigned int rev_h;
+                       unsigned int rev_l;
+
+                       soc = soc_info(&rev_h, &rev_l);
+                       if (!soc) {
+                               dev_err(&ofdev->dev, "unknown CPU model\n");
+                               return -ENXIO;
+                       }
+                       sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin",
+                               soc, rev_h, rev_l);
+
+                       dev_info(&ofdev->dev, "waiting for firmware %s\n",
+                               filename);
+
+                       /*
+                        * We call request_firmware_nowait instead of
+                        * request_firmware so that the driver can load and
+                        * initialize the ports without holding up the rest of
+                        * the kernel.  If hotplug support is enabled in the
+                        * kernel, then we use it.
+                        */
+                       ret = request_firmware_nowait(THIS_MODULE,
+                               FW_ACTION_HOTPLUG, filename, &ofdev->dev,
+                               &ofdev->dev, uart_firmware_cont);
+                       if (ret) {
+                               dev_err(&ofdev->dev,
+                                       "could not load firmware %s\n",
+                                       filename);
+                               return ret;
+                       }
+               }
+       }
+
+       qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL);
+       if (!qe_port) {
+               dev_err(&ofdev->dev, "can't allocate QE port structure\n");
+               return -ENOMEM;
+       }
+
+       /* Search for IRQ and mapbase */
+       ret = of_address_to_resource(np, 0, &res);
+       if (ret) {
+               dev_err(&ofdev->dev, "missing 'reg' property in device tree\n");
+               kfree(qe_port);
+               return ret;
+       }
+       if (!res.start) {
+               dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n");
+               kfree(qe_port);
+               return -EINVAL;
+       }
+       qe_port->port.mapbase = res.start;
+
+       /* Get the UCC number (device ID) */
+       /* UCCs are numbered 1-7 */
+       iprop = of_get_property(np, "device-id", NULL);
+       if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
+               dev_err(&ofdev->dev,
+                       "missing or invalid UCC specified in device tree\n");
+               kfree(qe_port);
+               return -ENODEV;
+       }
+       qe_port->ucc_num = *iprop - 1;
+
+       /*
+        * In the future, we should not require the BRG to be specified in the
+        * device tree.  If no clock-source is specified, then just pick a BRG
+        * to use.  This requires a new QE library function that manages BRG
+        * assignments.
+        */
+
+       sprop = of_get_property(np, "rx-clock-name", NULL);
+       if (!sprop) {
+               dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n");
+               kfree(qe_port);
+               return -ENODEV;
+       }
+
+       qe_port->us_info.rx_clock = qe_clock_source(sprop);
+       if ((qe_port->us_info.rx_clock < QE_BRG1) ||
+           (qe_port->us_info.rx_clock > QE_BRG16)) {
+               dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n");
+               kfree(qe_port);
+               return -ENODEV;
+       }
+
+#ifdef LOOPBACK
+       /* In internal loopback mode, TX and RX must use the same clock */
+       qe_port->us_info.tx_clock = qe_port->us_info.rx_clock;
+#else
+       sprop = of_get_property(np, "tx-clock-name", NULL);
+       if (!sprop) {
+               dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n");
+               kfree(qe_port);
+               return -ENODEV;
+       }
+       qe_port->us_info.tx_clock = qe_clock_source(sprop);
+#endif
+       if ((qe_port->us_info.tx_clock < QE_BRG1) ||
+           (qe_port->us_info.tx_clock > QE_BRG16)) {
+               dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n");
+               kfree(qe_port);
+               return -ENODEV;
+       }
+
+       /* Get the port number, numbered 0-3 */
+       iprop = of_get_property(np, "port-number", NULL);
+       if (!iprop) {
+               dev_err(&ofdev->dev, "missing port-number in device tree\n");
+               kfree(qe_port);
+               return -EINVAL;
+       }
+       qe_port->port.line = *iprop;
+       if (qe_port->port.line >= UCC_MAX_UART) {
+               dev_err(&ofdev->dev, "port-number must be 0-%u\n",
+                       UCC_MAX_UART - 1);
+               kfree(qe_port);
+               return -EINVAL;
+       }
+
+       qe_port->port.irq = irq_of_parse_and_map(np, 0);
+       if (qe_port->port.irq == NO_IRQ) {
+               dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n",
+                      qe_port->ucc_num + 1);
+               kfree(qe_port);
+               return -EINVAL;
+       }
+
+       /*
+        * Newer device trees have an "fsl,qe" compatible property for the QE
+        * node, but we still need to support older device trees.
+        */
+       np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+       if (!np) {
+               np = of_find_node_by_type(NULL, "qe");
+               if (!np) {
+                       dev_err(&ofdev->dev, "could not find 'qe' node\n");
+                       kfree(qe_port);
+                       return -EINVAL;
+               }
+       }
+
+       iprop = of_get_property(np, "brg-frequency", NULL);
+       if (!iprop) {
+               dev_err(&ofdev->dev,
+                      "missing brg-frequency in device tree\n");
+               kfree(qe_port);
+               return -EINVAL;
+       }
+
+       if (*iprop)
+               qe_port->port.uartclk = *iprop;
+       else {
+               /*
+                * Older versions of U-Boot do not initialize the brg-frequency
+                * property, so in this case we assume the BRG frequency is
+                * half the QE bus frequency.
+                */
+               iprop = of_get_property(np, "bus-frequency", NULL);
+               if (!iprop) {
+                       dev_err(&ofdev->dev,
+                               "missing QE bus-frequency in device tree\n");
+                       kfree(qe_port);
+                       return -EINVAL;
+               }
+               if (*iprop)
+                       qe_port->port.uartclk = *iprop / 2;
+               else {
+                       dev_err(&ofdev->dev,
+                               "invalid QE bus-frequency in device tree\n");
+                       kfree(qe_port);
+                       return -EINVAL;
+               }
+       }
+
+       spin_lock_init(&qe_port->port.lock);
+       qe_port->np = np;
+       qe_port->port.dev = &ofdev->dev;
+       qe_port->port.ops = &qe_uart_pops;
+       qe_port->port.iotype = UPIO_MEM;
+
+       qe_port->tx_nrfifos = TX_NUM_FIFO;
+       qe_port->tx_fifosize = TX_BUF_SIZE;
+       qe_port->rx_nrfifos = RX_NUM_FIFO;
+       qe_port->rx_fifosize = RX_BUF_SIZE;
+
+       qe_port->wait_closing = UCC_WAIT_CLOSING;
+       qe_port->port.fifosize = 512;
+       qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+
+       qe_port->us_info.ucc_num = qe_port->ucc_num;
+       qe_port->us_info.regs = (phys_addr_t) res.start;
+       qe_port->us_info.irq = qe_port->port.irq;
+
+       qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos;
+       qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos;
+
+       /* Make sure ucc_slow_init() initializes both TX and RX */
+       qe_port->us_info.init_tx = 1;
+       qe_port->us_info.init_rx = 1;
+
+       /* Add the port to the uart sub-system.  This will cause
+        * qe_uart_config_port() to be called, so the us_info structure must
+        * be initialized.
+        */
+       ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port);
+       if (ret) {
+               dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n",
+                      qe_port->port.line);
+               kfree(qe_port);
+               return ret;
+       }
+
+       dev_set_drvdata(&ofdev->dev, qe_port);
+
+       dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n",
+               qe_port->ucc_num + 1, qe_port->port.line);
+
+       /* Display the mknod command for this device */
+       dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n",
+              qe_port->port.line, SERIAL_QE_MAJOR,
+              SERIAL_QE_MINOR + qe_port->port.line);
+
+       return 0;
+}
+
+static int ucc_uart_remove(struct of_device *ofdev)
+{
+       struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);
+
+       dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line);
+
+       uart_remove_one_port(&ucc_uart_driver, &qe_port->port);
+
+       dev_set_drvdata(&ofdev->dev, NULL);
+       kfree(qe_port);
+
+       return 0;
+}
+
+static struct of_device_id ucc_uart_match[] = {
+       {
+               .type = "serial",
+               .compatible = "ucc_uart",
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, ucc_uart_match);
+
+static struct of_platform_driver ucc_uart_of_driver = {
+       .owner          = THIS_MODULE,
+       .name           = "ucc_uart",
+       .match_table    = ucc_uart_match,
+       .probe          = ucc_uart_probe,
+       .remove         = ucc_uart_remove,
+};
+
+static int __init ucc_uart_init(void)
+{
+       int ret;
+
+       printk(KERN_INFO "Freescale QUICC Engine UART device driver\n");
+#ifdef LOOPBACK
+       printk(KERN_INFO "ucc-uart: Using loopback mode\n");
+#endif
+
+       ret = uart_register_driver(&ucc_uart_driver);
+       if (ret) {
+               printk(KERN_ERR "ucc-uart: could not register UART driver\n");
+               return ret;
+       }
+
+       ret = of_register_platform_driver(&ucc_uart_of_driver);
+       if (ret)
+               printk(KERN_ERR
+                      "ucc-uart: could not register platform driver\n");
+
+       return ret;
+}
+
+static void __exit ucc_uart_exit(void)
+{
+       printk(KERN_INFO
+              "Freescale QUICC Engine UART device driver unloading\n");
+
+       of_unregister_platform_driver(&ucc_uart_of_driver);
+       uart_unregister_driver(&ucc_uart_driver);
+}
+
+module_init(ucc_uart_init);
+module_exit(ucc_uart_exit);
+
+MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART");
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR);
+
diff -x .git -x .gitignore -Nur linux-2.6.24/drivers/spi/mpc52xx_psc_spi.c powerpc.git/drivers/spi/mpc52xx_psc_spi.c
--- linux-2.6.24/drivers/spi/mpc52xx_psc_spi.c  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/drivers/spi/mpc52xx_psc_spi.c   2008-01-28 20:26:20.000000000 +0100
@@ -330,6 +330,7 @@
 
 static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
 {
+       struct device_node *np;
        struct mpc52xx_cdm __iomem *cdm;
        struct mpc52xx_gpio __iomem *gpio;
        struct mpc52xx_psc __iomem *psc = mps->psc;
@@ -338,8 +339,12 @@
        int ret = 0;
 
 #if defined(CONFIG_PPC_MERGE)
-       cdm = mpc52xx_find_and_map("mpc5200-cdm");
-       gpio = mpc52xx_find_and_map("mpc5200-gpio");
+       np = of_find_compatible_node(NULL, NULL, "mpc5200-cdm");
+       cdm = of_iomap(np, 0);
+       of_node_put(np);
+       np = of_find_compatible_node(NULL, NULL, "mpc5200-gpio");
+       gpio = of_iomap(np, 0);
+       of_node_put(np);
 #else
        cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
        gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
diff -x .git -x .gitignore -Nur linux-2.6.24/fs/openpromfs/inode.c powerpc.git/fs/openpromfs/inode.c
--- linux-2.6.24/fs/openpromfs/inode.c  2008-01-28 20:50:11.000000000 +0100
+++ powerpc.git/fs/openpromfs/inode.c   2008-01-28 20:26:31.000000000 +0100
@@ -131,7 +131,7 @@
        /* Nothing to do */
 }
 
-static const struct seq_operations property_op = {
+static struct seq_operations property_op = {
        .start          = property_start,
        .next           = property_next,
        .stop           = property_stop,
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/8xx_immap.h powerpc.git/include/asm-powerpc/8xx_immap.h
--- linux-2.6.24/include/asm-powerpc/8xx_immap.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/8xx_immap.h 2008-01-28 20:26:42.000000000 +0100
@@ -123,7 +123,7 @@
 #define OR_G5LA                0x00000400      /* Output #GPL5 on #GPL_A5              */
 #define OR_G5LS                0x00000200      /* Drive #GPL high on falling edge of...*/
 #define OR_BI          0x00000100      /* Burst inhibit                        */
-#define OR_SCY_MSK     0x000000f0      /* Cycle Lenght in Clocks               */
+#define OR_SCY_MSK     0x000000f0      /* Cycle Length in Clocks               */
 #define OR_SCY_0_CLK   0x00000000      /* 0 clock cycles wait states           */
 #define OR_SCY_1_CLK   0x00000010      /* 1 clock cycles wait states           */
 #define OR_SCY_2_CLK   0x00000020      /* 2 clock cycles wait states           */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/commproc.h powerpc.git/include/asm-powerpc/commproc.h
--- linux-2.6.24/include/asm-powerpc/commproc.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/commproc.h  2008-01-28 20:26:42.000000000 +0100
@@ -693,7 +693,7 @@
 #define        CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
 #define        CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
 #define        CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
-#define CICR_IRL_MASK          ((uint)0x0000e000)      /* Core interrrupt */
+#define CICR_IRL_MASK          ((uint)0x0000e000)      /* Core interrupt */
 #define CICR_HP_MASK           ((uint)0x00001f00)      /* Hi-pri int. */
 #define CICR_IEN               ((uint)0x00000080)      /* Int. enable */
 #define CICR_SPS               ((uint)0x00000001)      /* SCC Spread */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/cpm.h powerpc.git/include/asm-powerpc/cpm.h
--- linux-2.6.24/include/asm-powerpc/cpm.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/cpm.h       2008-01-28 20:26:42.000000000 +0100
@@ -10,5 +10,6 @@
 unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
 void __iomem *cpm_muram_addr(unsigned long offset);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
+int cpm_command(u32 command, u8 opcode);
 
 #endif
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/cputable.h powerpc.git/include/asm-powerpc/cputable.h
--- linux-2.6.24/include/asm-powerpc/cputable.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/cputable.h  2008-01-28 20:26:42.000000000 +0100
@@ -57,6 +57,14 @@
        PPC_PMC_PA6T = 2,
 };
 
+struct pt_regs;
+
+extern int machine_check_generic(struct pt_regs *regs);
+extern int machine_check_4xx(struct pt_regs *regs);
+extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500(struct pt_regs *regs);
+extern int machine_check_e200(struct pt_regs *regs);
+
 /* NOTE WELL: Update identify_cpu() if fields are added or removed! */
 struct cpu_spec {
        /* CPU is matched via (PVR & pvr_mask) == pvr_value */
@@ -97,6 +105,11 @@
 
        /* Name of processor class, for the ELF AT_PLATFORM entry */
        char            *platform;
+
+       /* Processor specific machine check handling. Return negative
+        * if the error is fatal, 1 if it was fully recovered and 0 to
+        * pass up (not CPU originated) */
+       int             (*machine_check)(struct pt_regs *regs);
 };
 
 extern struct cpu_spec         *cur_cpu_spec;
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/cputhreads.h powerpc.git/include/asm-powerpc/cputhreads.h
--- linux-2.6.24/include/asm-powerpc/cputhreads.h       1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/include/asm-powerpc/cputhreads.h        2008-01-28 20:26:42.000000000 +0100
@@ -0,0 +1,71 @@
+#ifndef _ASM_POWERPC_CPUTHREADS_H
+#define _ASM_POWERPC_CPUTHREADS_H
+
+#include <linux/cpumask.h>
+
+/*
+ * Mapping of threads to cores
+ */
+
+#ifdef CONFIG_SMP
+extern int threads_per_core;
+extern int threads_shift;
+extern cpumask_t threads_core_mask;
+#else
+#define threads_per_core       1
+#define threads_shift          0
+#define threads_core_mask      (CPU_MASK_CPU0)
+#endif
+
+/* cpu_thread_mask_to_cores - Return a cpumask of one per cores
+ *                            hit by the argument
+ *
+ * @threads:   a cpumask of threads
+ *
+ * This function returns a cpumask which will have one "cpu" (or thread)
+ * bit set for each core that has at least one thread set in the argument.
+ *
+ * This can typically be used for things like IPI for tlb invalidations
+ * since those need to be done only once per core/TLB
+ */
+static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+{
+       cpumask_t       tmp, res;
+       int             i;
+
+       res = CPU_MASK_NONE;
+       for (i = 0; i < NR_CPUS; i += threads_per_core) {
+               cpus_shift_right(tmp, threads_core_mask, i);
+               if (cpus_intersects(threads, tmp))
+                       cpu_set(i, res);
+       }
+       return res;
+}
+
+static inline int cpu_nr_cores(void)
+{
+       return NR_CPUS >> threads_shift;
+}
+
+static inline cpumask_t cpu_online_cores_map(void)
+{
+       return cpu_thread_mask_to_cores(cpu_online_map);
+}
+
+static inline int cpu_thread_to_core(int cpu)
+{
+       return cpu >> threads_shift;
+}
+
+static inline int cpu_thread_in_core(int cpu)
+{
+       return cpu & (threads_per_core - 1);
+}
+
+static inline int cpu_first_thread_in_core(int cpu)
+{
+       return cpu & ~(threads_per_core - 1);
+}
+
+#endif /* _ASM_POWERPC_CPUTHREADS_H */
+
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/dcr-native.h powerpc.git/include/asm-powerpc/dcr-native.h
--- linux-2.6.24/include/asm-powerpc/dcr-native.h       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/dcr-native.h        2008-01-28 20:26:42.000000000 +0100
@@ -22,6 +22,8 @@
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
+#include <linux/spinlock.h>
+
 typedef struct {
        unsigned int base;
 } dcr_host_t;
@@ -55,20 +57,28 @@
 } while (0)
 
 /* R/W of indirect DCRs make use of standard naming conventions for DCRs */
-#define mfdcri(base, reg)                      \
-({                                             \
-       mtdcr(base ## _CFGADDR, base ## _ ## reg);      \
-       mfdcr(base ## _CFGDATA);                        \
+extern spinlock_t dcr_ind_lock;
+
+#define mfdcri(base, reg)                              \
+({                                                     \
+       unsigned long flags;                            \
+       unsigned int val;                               \
+       spin_lock_irqsave(&dcr_ind_lock, flags);        \
+       mtdcr(DCRN_ ## base ## _CONFIG_ADDR, reg);      \
+       val = mfdcr(DCRN_ ## base ## _CONFIG_DATA);     \
+       spin_unlock_irqrestore(&dcr_ind_lock, flags);   \
+       val;                                            \
 })
 
-#define mtdcri(base, reg, data)                        \
-do {                                           \
-       mtdcr(base ## _CFGADDR, base ## _ ## reg);      \
-       mtdcr(base ## _CFGDATA, data);          \
+#define mtdcri(base, reg, data)                                \
+do {                                                   \
+       unsigned long flags;                            \
+       spin_lock_irqsave(&dcr_ind_lock, flags);        \
+       mtdcr(DCRN_ ## base ## _CONFIG_ADDR, reg);      \
+       mtdcr(DCRN_ ## base ## _CONFIG_DATA, data);     \
+       spin_unlock_irqrestore(&dcr_ind_lock, flags);   \
 } while (0)
 
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DCR_NATIVE_H */
-
-
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/dcr-regs.h powerpc.git/include/asm-powerpc/dcr-regs.h
--- linux-2.6.24/include/asm-powerpc/dcr-regs.h 1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/include/asm-powerpc/dcr-regs.h  2008-01-28 20:26:42.000000000 +0100
@@ -0,0 +1,71 @@
+/*
+ * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
+ * 4xx processors
+ *
+ *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
+ *                   <benh@kernel.crashing.org>
+ *
+ * Mostly lifted from asm-ppc/ibm4xx.h by
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ */
+
+#ifndef __DCR_REGS_H__
+#define __DCR_REGS_H__
+
+/*
+ * Most DCRs used for controlling devices such as the MAL, DMA engine,
+ * etc... are obtained for the device tree.
+ *
+ * The definitions in this files are fixed DCRs and indirect DCRs that
+ * are commonly used outside of specific drivers or refer to core
+ * common registers that may occasionally have to be tweaked outside
+ * of the driver main register set
+ */
+
+/* CPRs (440GX and 440SP/440SPe) */
+#define DCRN_CPR0_CONFIG_ADDR  0xc
+#define DCRN_CPR0_CONFIG_DATA  0xd
+
+/* SDRs (440GX and 440SP/440SPe) */
+#define DCRN_SDR0_CONFIG_ADDR  0xe
+#define DCRN_SDR0_CONFIG_DATA  0xf
+
+#define SDR0_PFC0              0x4100
+#define SDR0_PFC1              0x4101
+#define SDR0_PFC1_EPS          0x1c00000
+#define SDR0_PFC1_EPS_SHIFT    22
+#define SDR0_PFC1_RMII         0x02000000
+#define SDR0_MFR               0x4300
+#define SDR0_MFR_TAH0          0x80000000      /* TAHOE0 Enable */
+#define SDR0_MFR_TAH1          0x40000000      /* TAHOE1 Enable */
+#define SDR0_MFR_PCM           0x10000000      /* PPC440GP irq compat mode */
+#define SDR0_MFR_ECS           0x08000000      /* EMAC int clk */
+#define SDR0_MFR_T0TXFL                0x00080000
+#define SDR0_MFR_T0TXFH                0x00040000
+#define SDR0_MFR_T1TXFL                0x00020000
+#define SDR0_MFR_T1TXFH                0x00010000
+#define SDR0_MFR_E0TXFL                0x00008000
+#define SDR0_MFR_E0TXFH                0x00004000
+#define SDR0_MFR_E0RXFL                0x00002000
+#define SDR0_MFR_E0RXFH                0x00001000
+#define SDR0_MFR_E1TXFL                0x00000800
+#define SDR0_MFR_E1TXFH                0x00000400
+#define SDR0_MFR_E1RXFL                0x00000200
+#define SDR0_MFR_E1RXFH                0x00000100
+#define SDR0_MFR_E2TXFL                0x00000080
+#define SDR0_MFR_E2TXFH                0x00000040
+#define SDR0_MFR_E2RXFL                0x00000020
+#define SDR0_MFR_E2RXFH                0x00000010
+#define SDR0_MFR_E3TXFL                0x00000008
+#define SDR0_MFR_E3TXFH                0x00000004
+#define SDR0_MFR_E3RXFL                0x00000002
+#define SDR0_MFR_E3RXFH                0x00000001
+#define SDR0_UART0             0x0120
+#define SDR0_UART1             0x0121
+#define SDR0_UART2             0x0122
+#define SDR0_UART3             0x0123
+#define SDR0_CUST0             0x4000
+
+#endif /* __DCR_REGS_H__ */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/dma-mapping.h powerpc.git/include/asm-powerpc/dma-mapping.h
--- linux-2.6.24/include/asm-powerpc/dma-mapping.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/dma-mapping.h       2008-01-28 20:26:42.000000000 +0100
@@ -87,6 +87,9 @@
        return dma_ops->dma_supported(dev, mask);
 }
 
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
@@ -186,8 +189,6 @@
 extern struct dma_mapping_ops dma_iommu_ops;
 extern struct dma_mapping_ops dma_direct_ops;
 
-extern unsigned long dma_direct_offset;
-
 #else /* CONFIG_PPC64 */
 
 #define dma_supported(dev, mask)       (1)
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/firmware.h powerpc.git/include/asm-powerpc/firmware.h
--- linux-2.6.24/include/asm-powerpc/firmware.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/firmware.h  2008-01-28 20:26:42.000000000 +0100
@@ -64,7 +64,7 @@
        FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
        FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
        FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
-       FW_FEATURE_CELLEB_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
+       FW_FEATURE_CELLEB_ALWAYS = 0,
        FW_FEATURE_NATIVE_POSSIBLE = 0,
        FW_FEATURE_NATIVE_ALWAYS = 0,
        FW_FEATURE_POSSIBLE =
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/immap_86xx.h powerpc.git/include/asm-powerpc/immap_86xx.h
--- linux-2.6.24/include/asm-powerpc/immap_86xx.h       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/immap_86xx.h        2008-01-28 20:26:42.000000000 +0100
@@ -89,14 +89,14 @@
  * them.
  *
  * guts: Pointer to GUTS structure
- * co: The DMA controller (1 or 2)
+ * co: The DMA controller (0 or 1)
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
  */
 static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
        unsigned int co, unsigned int ch, unsigned int device)
 {
-       unsigned int shift = 16 + (8 * (2 - co) + 2 * (3 - ch));
+       unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
 
        clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
 }
@@ -118,6 +118,27 @@
 #define CCSR_GUTS_PMUXCR_DMA1_0                0x00000002
 #define CCSR_GUTS_PMUXCR_DMA1_3                0x00000001
 
+/*
+ * Set the DMA external control bits in the GUTS
+ *
+ * The DMA external control bits in the PMUXCR are only meaningful for
+ * channels 0 and 3.  Any other channels are ignored.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * value: the new value for the bit (0 or 1)
+ */
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+       unsigned int co, unsigned int ch, unsigned int value)
+{
+       if ((ch == 0) || (ch == 3)) {
+               unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
+
+               clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
+       }
+}
+
 #define CCSR_GUTS_CLKDVDR_PXCKEN       0x80000000
 #define CCSR_GUTS_CLKDVDR_SSICKEN      0x20000000
 #define CCSR_GUTS_CLKDVDR_PXCKINV      0x10000000
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/immap_qe.h powerpc.git/include/asm-powerpc/immap_qe.h
--- linux-2.6.24/include/asm-powerpc/immap_qe.h 2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/immap_qe.h  2008-01-28 20:26:42.000000000 +0100
@@ -393,9 +393,39 @@
        u8      res2[0x48];
 } __attribute__ ((packed));
 
-/* RISC Special Registers (Trap and Breakpoint) */
+/*
+ * RISC Special Registers (Trap and Breakpoint).  These are described in
+ * the QE Developer's Handbook.
+ */
 struct rsp {
-       u32     reg[0x40];      /* 64 32-bit registers */
+       __be32 tibcr[16];       /* Trap/instruction breakpoint control regs */
+       u8 res0[64];
+       __be32 ibcr0;
+       __be32 ibs0;
+       __be32 ibcnr0;
+       u8 res1[4];
+       __be32 ibcr1;
+       __be32 ibs1;
+       __be32 ibcnr1;
+       __be32 npcr;
+       __be32 dbcr;
+       __be32 dbar;
+       __be32 dbamr;
+       __be32 dbsr;
+       __be32 dbcnr;
+       u8 res2[12];
+       __be32 dbdr_h;
+       __be32 dbdr_l;
+       __be32 dbdmr_h;
+       __be32 dbdmr_l;
+       __be32 bsr;
+       __be32 bor;
+       __be32 bior;
+       u8 res3[4];
+       __be32 iatr[4];
+       __be32 eccr;            /* Exception control configuration register */
+       __be32 eicr;
+       u8 res4[0x100-0xf8];
 } __attribute__ ((packed));
 
 struct qe_immap {
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/io.h powerpc.git/include/asm-powerpc/io.h
--- linux-2.6.24/include/asm-powerpc/io.h       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/io.h        2008-01-28 20:26:42.000000000 +0100
@@ -50,15 +50,16 @@
 #define PCI_DRAM_OFFSET        pci_dram_offset
 #else
 #define _IO_BASE       pci_io_base
-#define _ISA_MEM_BASE  0
+#define _ISA_MEM_BASE  isa_mem_base
 #define PCI_DRAM_OFFSET        0
 #endif
 
 extern unsigned long isa_io_base;
-extern unsigned long isa_mem_base;
 extern unsigned long pci_io_base;
 extern unsigned long pci_dram_offset;
 
+extern resource_size_t isa_mem_base;
+
 #if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
 #error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
 #endif
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/iommu.h powerpc.git/include/asm-powerpc/iommu.h
--- linux-2.6.24/include/asm-powerpc/iommu.h    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/iommu.h     2008-01-28 20:26:42.000000000 +0100
@@ -69,10 +69,9 @@
 };
 
 struct scatterlist;
-struct device_node;
 
 /* Frees table for an individual device node */
-extern void iommu_free_table(struct device_node *dn);
+extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
 
 /* Initializes an iommu_table based in values set in the passed-in
  * structure
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/ipic.h powerpc.git/include/asm-powerpc/ipic.h
--- linux-2.6.24/include/asm-powerpc/ipic.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/ipic.h      2008-01-28 20:26:42.000000000 +0100
@@ -20,11 +20,13 @@
 
 /* Flags when we init the IPIC */
 #define IPIC_SPREADMODE_GRP_A  0x00000001
-#define IPIC_SPREADMODE_GRP_D  0x00000002
-#define IPIC_SPREADMODE_MIX_A  0x00000004
-#define IPIC_SPREADMODE_MIX_B  0x00000008
-#define IPIC_DISABLE_MCP_OUT   0x00000010
-#define IPIC_IRQ0_MCP          0x00000020
+#define IPIC_SPREADMODE_GRP_B  0x00000002
+#define IPIC_SPREADMODE_GRP_C  0x00000004
+#define IPIC_SPREADMODE_GRP_D  0x00000008
+#define IPIC_SPREADMODE_MIX_A  0x00000010
+#define IPIC_SPREADMODE_MIX_B  0x00000020
+#define IPIC_DISABLE_MCP_OUT   0x00000040
+#define IPIC_IRQ0_MCP          0x00000080
 
 /* IPIC registers offsets */
 #define IPIC_SICFR     0x00    /* System Global Interrupt Configuration Register */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/iseries/hv_lp_event.h powerpc.git/include/asm-powerpc/iseries/hv_lp_event.h
--- linux-2.6.24/include/asm-powerpc/iseries/hv_lp_event.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/iseries/hv_lp_event.h       2008-01-28 20:26:42.000000000 +0100
@@ -78,7 +78,7 @@
 
 /*
  * Close an Lp Event Path for a type and partition
- * returns 0 on sucess
+ * returns 0 on success
  */
 extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/kexec.h powerpc.git/include/asm-powerpc/kexec.h
--- linux-2.6.24/include/asm-powerpc/kexec.h    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/kexec.h     2008-01-28 20:26:42.000000000 +0100
@@ -123,6 +123,9 @@
 extern void default_machine_kexec(struct kimage *image);
 extern int default_machine_kexec_prepare(struct kimage *image);
 extern void default_machine_crash_shutdown(struct pt_regs *regs);
+typedef void (*crash_shutdown_t)(void);
+extern int crash_shutdown_register(crash_shutdown_t handler);
+extern int crash_shutdown_unregister(crash_shutdown_t handler);
 
 extern void machine_kexec_simple(struct kimage *image);
 extern void crash_kexec_secondary(struct pt_regs *regs);
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/lmb.h powerpc.git/include/asm-powerpc/lmb.h
--- linux-2.6.24/include/asm-powerpc/lmb.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/lmb.h       2008-01-28 20:26:42.000000000 +0100
@@ -51,6 +51,7 @@
 extern unsigned long __init lmb_phys_mem_size(void);
 extern unsigned long __init lmb_end_of_DRAM(void);
 extern void __init lmb_enforce_memory_limit(unsigned long memory_limit);
+extern int __init lmb_is_reserved(unsigned long addr);
 
 extern void lmb_dump_all(void);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/machdep.h powerpc.git/include/asm-powerpc/machdep.h
--- linux-2.6.24/include/asm-powerpc/machdep.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/machdep.h   2008-01-28 20:26:42.000000000 +0100
@@ -204,6 +204,13 @@
        /*
         * optional PCI "hooks"
         */
+       /* Called in indirect_* to avoid touching devices */
+       int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
+       /* Called at then very end of pcibios_init() */
+       void (*pcibios_after_init)(void);
+
+#endif /* CONFIG_PPC32 */
 
        /* Called after PPC generic resource fixup to perform
           machine specific fixups */
@@ -212,18 +219,9 @@
        /* Called for each PCI bus in the system when it's probed */
        void (*pcibios_fixup_bus)(struct pci_bus *);
 
-       /* Called when pci_enable_device() is called (initial=0) or
-        * when a device with no assigned resource is found (initial=1).
-        * Returns 0 to allow assignment/enabling of the device. */
-       int  (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
-
-       /* Called in indirect_* to avoid touching devices */
-       int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
-       /* Called at then very end of pcibios_init() */
-       void (*pcibios_after_init)(void);
-
-#endif /* CONFIG_PPC32 */
+       /* Called when pci_enable_device() is called. Returns 0 to
+        * allow assignment/enabling of the device. */
+       int  (*pcibios_enable_device_hook)(struct pci_dev *);
 
        /* Called to shutdown machine specific hardware not already controlled
         * by other drivers.
@@ -253,6 +251,16 @@
         */
        void (*machine_kexec)(struct kimage *image);
 #endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_SUSPEND
+       /* These are called to disable and enable, respectively, IRQs when
+        * entering a suspend state.  If NULL, then the generic versions
+        * will be called.  The generic versions disable/enable the
+        * decrementer along with interrupts.
+        */
+       void (*suspend_disable_irqs)(void);
+       void (*suspend_enable_irqs)(void);
+#endif
 };
 
 extern void power4_idle(void);
@@ -326,5 +334,31 @@
                ppc_md.log_error(buf, err_type, fatal);
 }
 
+#define __define_machine_initcall(mach,level,fn,id) \
+       static int __init __machine_initcall_##mach##_##fn(void) { \
+               if (machine_is(mach)) return fn(); \
+               return 0; \
+       } \
+       __define_initcall(level,__machine_initcall_##mach##_##fn,id);
+
+#define machine_core_initcall(mach,fn)         __define_machine_initcall(mach,"1",fn,1)
+#define machine_core_initcall_sync(mach,fn)    __define_machine_initcall(mach,"1s",fn,1s)
+#define machine_postcore_initcall(mach,fn)     __define_machine_initcall(mach,"2",fn,2)
+#define machine_postcore_initcall_sync(mach,fn)        __define_machine_initcall(mach,"2s",fn,2s)
+#define machine_arch_initcall(mach,fn)         __define_machine_initcall(mach,"3",fn,3)
+#define machine_arch_initcall_sync(mach,fn)    __define_machine_initcall(mach,"3s",fn,3s)
+#define machine_subsys_initcall(mach,fn)       __define_machine_initcall(mach,"4",fn,4)
+#define machine_subsys_initcall_sync(mach,fn)  __define_machine_initcall(mach,"4s",fn,4s)
+#define machine_fs_initcall(mach,fn)           __define_machine_initcall(mach,"5",fn,5)
+#define machine_fs_initcall_sync(mach,fn)      __define_machine_initcall(mach,"5s",fn,5s)
+#define machine_rootfs_initcall(mach,fn)       __define_machine_initcall(mach,"rootfs",fn,rootfs)
+#define machine_device_initcall(mach,fn)       __define_machine_initcall(mach,"6",fn,6)
+#define machine_device_initcall_sync(mach,fn)  __define_machine_initcall(mach,"6s",fn,6s)
+#define machine_late_initcall(mach,fn)         __define_machine_initcall(mach,"7",fn,7)
+#define machine_late_initcall_sync(mach,fn)    __define_machine_initcall(mach,"7s",fn,7s)
+
+void generic_suspend_disable_irqs(void);
+void generic_suspend_enable_irqs(void);
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_MACHDEP_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/mmu-hash64.h powerpc.git/include/asm-powerpc/mmu-hash64.h
--- linux-2.6.24/include/asm-powerpc/mmu-hash64.h       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/mmu-hash64.h        2008-01-28 21:37:04.000000000 +0100
@@ -80,7 +80,7 @@
 #define HPTE_V_AVPN_SHIFT      7
 #define HPTE_V_AVPN            ASM_CONST(0x3fffffffffffff80)
 #define HPTE_V_AVPN_VAL(x)     (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
-#define HPTE_V_COMPARE(x,y)    (!(((x) ^ (y)) & 0xffffffffffffff80))
+#define HPTE_V_COMPARE(x,y)    (!(((x) ^ (y)) & 0xffffffffffffff80UL))
 #define HPTE_V_BOLTED          ASM_CONST(0x0000000000000010)
 #define HPTE_V_LOCK            ASM_CONST(0x0000000000000008)
 #define HPTE_V_LARGE           ASM_CONST(0x0000000000000004)
@@ -180,6 +180,7 @@
 extern int mmu_io_psize;
 extern int mmu_kernel_ssize;
 extern int mmu_highuser_ssize;
+extern u16 mmu_slb_size;
 
 /*
  * If the processor supports 64k normal pages but not 64k cache
@@ -277,6 +278,7 @@
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
                             unsigned long pstart, unsigned long mode,
                             int psize, int ssize);
+extern void set_huge_psize(int psize);
 
 extern void htab_initialize(void);
 extern void htab_initialize_secondary(void);
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/mpc52xx.h powerpc.git/include/asm-powerpc/mpc52xx.h
--- linux-2.6.24/include/asm-powerpc/mpc52xx.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/mpc52xx.h   2008-01-28 20:26:42.000000000 +0100
@@ -248,8 +248,6 @@
 
 #ifndef __ASSEMBLY__
 
-extern void __iomem * mpc52xx_find_and_map(const char *);
-extern void __iomem * mpc52xx_find_and_map_path(const char *path);
 extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
 extern void mpc5200_setup_xlb_arbiter(void);
 extern void mpc52xx_declare_of_platform_devices(void);
@@ -257,7 +255,12 @@
 extern void mpc52xx_init_irq(void);
 extern unsigned int mpc52xx_get_irq(void);
 
+#ifdef CONFIG_PCI
 extern int __init mpc52xx_add_bridge(struct device_node *node);
+extern void __init mpc52xx_setup_pci(void);
+#else
+static inline void mpc52xx_setup_pci(void) { }
+#endif
 
 extern void __init mpc52xx_map_wdt(void);
 extern void mpc52xx_restart(char *cmd);
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/mpc52xx_psc.h powerpc.git/include/asm-powerpc/mpc52xx_psc.h
--- linux-2.6.24/include/asm-powerpc/mpc52xx_psc.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/mpc52xx_psc.h       2008-01-28 20:26:42.000000000 +0100
@@ -153,6 +153,9 @@
        u8              reserved16[3];
        u8              irfdr;          /* PSC + 0x54 */
        u8              reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
        u16             rfnum;          /* PSC + 0x58 */
        u16             reserved18;
        u16             tfnum;          /* PSC + 0x5c */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/mpc8260.h powerpc.git/include/asm-powerpc/mpc8260.h
--- linux-2.6.24/include/asm-powerpc/mpc8260.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/mpc8260.h   2008-01-28 20:26:42.000000000 +0100
@@ -8,6 +8,7 @@
 #ifndef __ASM_POWERPC_MPC8260_H__
 #define __ASM_POWERPC_MPC8260_H__
 
+#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */
 
 #ifdef CONFIG_8260
 
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/mpic.h powerpc.git/include/asm-powerpc/mpic.h
--- linux-2.6.24/include/asm-powerpc/mpic.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/mpic.h      2008-01-28 20:26:42.000000000 +0100
@@ -22,7 +22,9 @@
 #define MPIC_GREG_GLOBAL_CONF_0                0x00020
 #define                MPIC_GREG_GCONF_RESET                   0x80000000
 #define                MPIC_GREG_GCONF_8259_PTHROU_DIS         0x20000000
+#define                MPIC_GREG_GCONF_NO_BIAS                 0x10000000
 #define                MPIC_GREG_GCONF_BASE_MASK               0x000fffff
+#define                MPIC_GREG_GCONF_MCK                     0x08000000
 #define MPIC_GREG_GLOBAL_CONF_1                0x00030
 #define                MPIC_GREG_GLOBAL_CONF_1_SIE             0x08000000
 #define                MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK  0x70000000
@@ -78,6 +80,7 @@
 #define        MPIC_CPU_WHOAMI_MASK                    0x0000001f
 #define MPIC_CPU_INTACK                        0x000a0
 #define MPIC_CPU_EOI                   0x000b0
+#define MPIC_CPU_MCACK                 0x000c0
 
 /*
  * Per-source registers
@@ -141,6 +144,7 @@
 #define TSI108_CPU_WHOAMI              0xffffffff
 #define TSI108_CPU_INTACK              0x00004
 #define TSI108_CPU_EOI                 0x00008
+#define TSI108_CPU_MCACK               0x00004 /* Doesn't really exist here */
 
 /*
  * Per-source registers
@@ -183,6 +187,7 @@
        MPIC_IDX_CPU_WHOAMI,
        MPIC_IDX_CPU_INTACK,
        MPIC_IDX_CPU_EOI,
+       MPIC_IDX_CPU_MCACK,
 
        MPIC_IDX_IRQ_BASE,
        MPIC_IDX_IRQ_STRIDE,
@@ -344,6 +349,10 @@
 #define MPIC_USES_DCR                  0x00000080
 /* MPIC has 11-bit vector fields (or larger) */
 #define MPIC_LARGE_VECTORS             0x00000100
+/* Enable delivery of prio 15 interrupts as MCK instead of EE */
+#define MPIC_ENABLE_MCK                        0x00000200
+/* Disable bias among target selection, spread interrupts evenly */
+#define MPIC_NO_BIAS                   0x00000400
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK               0xf0000000
@@ -447,10 +456,19 @@
 /* Send a message (IPI) to a given target (cpu number or MSG_*) */
 void smp_mpic_message_pass(int target, int msg);
 
+/* Unmask a specific virq */
+extern void mpic_unmask_irq(unsigned int irq);
+/* Mask a specific virq */
+extern void mpic_mask_irq(unsigned int irq);
+/* EOI a specific virq */
+extern void mpic_end_irq(unsigned int irq);
+
 /* Fetch interrupt from a given mpic */
 extern unsigned int mpic_get_one_irq(struct mpic *mpic);
-/* This one gets to the primary mpic */
+/* This one gets from the primary mpic */
 extern unsigned int mpic_get_irq(void);
+/* Fetch Machine Check interrupt from primary mpic */
+extern unsigned int mpic_get_mcirq(void);
 
 /* Set the EPIC clock ratio */
 void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/nvram.h powerpc.git/include/asm-powerpc/nvram.h
--- linux-2.6.24/include/asm-powerpc/nvram.h    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/nvram.h     2008-01-28 20:26:42.000000000 +0100
@@ -10,6 +10,8 @@
 #ifndef _ASM_POWERPC_NVRAM_H
 #define _ASM_POWERPC_NVRAM_H
 
+#include <linux/errno.h>
+
 #define NVRW_CNT 0x20
 #define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
 #define NVRAM_BLOCK_LEN 16
@@ -71,7 +73,16 @@
 extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
 
 extern int pSeries_nvram_init(void);
+
+#ifdef CONFIG_MMIO_NVRAM
 extern int mmio_nvram_init(void);
+#else
+static inline int mmio_nvram_init(void)
+{
+       return -ENODEV;
+}
+#endif
+
 #endif /* __KERNEL__ */
 
 /* PowerMac specific nvram stuffs */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/of_platform.h powerpc.git/include/asm-powerpc/of_platform.h
--- linux-2.6.24/include/asm-powerpc/of_platform.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/of_platform.h       2008-01-28 20:26:42.000000000 +0100
@@ -15,8 +15,14 @@
 #include <linux/of_platform.h>
 
 /* Platform drivers register/unregister */
-extern int of_register_platform_driver(struct of_platform_driver *drv);
-extern void of_unregister_platform_driver(struct of_platform_driver *drv);
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+       return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+       of_unregister_driver(drv);
+}
 
 /* Platform devices and busses creation */
 extern struct of_device *of_platform_device_create(struct device_node *np,
@@ -26,9 +32,11 @@
 #define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
 
 extern int of_platform_bus_probe(struct device_node *root,
-                                struct of_device_id *matches,
+                                const struct of_device_id *matches,
                                 struct device *parent);
 
 extern struct of_device *of_find_device_by_phandle(phandle ph);
 
+extern void of_instantiate_rtc(void);
+
 #endif /* _ASM_POWERPC_OF_PLATFORM_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/pci-bridge.h powerpc.git/include/asm-powerpc/pci-bridge.h
--- linux-2.6.24/include/asm-powerpc/pci-bridge.h       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/pci-bridge.h        2008-01-28 20:26:42.000000000 +0100
@@ -1,15 +1,42 @@
 #ifndef _ASM_POWERPC_PCI_BRIDGE_H
 #define _ASM_POWERPC_PCI_BRIDGE_H
 #ifdef __KERNEL__
-
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
 
-#ifndef CONFIG_PPC64
-
 struct device_node;
-struct pci_controller;
+
+extern unsigned int ppc_pci_flags;
+enum {
+       /* Force re-assigning all resources (ignore firmware
+        * setup completely)
+        */
+       PPC_PCI_REASSIGN_ALL_RSRC       = 0x00000001,
+
+       /* Re-assign all bus numbers */
+       PPC_PCI_REASSIGN_ALL_BUS        = 0x00000002,
+
+       /* Do not try to assign, just use existing setup */
+       PPC_PCI_PROBE_ONLY              = 0x00000004,
+
+       /* Don't bother with ISA alignment unless the bridge has
+        * ISA forwarding enabled
+        */
+       PPC_PCI_CAN_SKIP_ISA_ALIGN      = 0x00000008,
+
+       /* Enable domain numbers in /proc */
+       PPC_PCI_ENABLE_PROC_DOMAINS     = 0x00000010,
+       /* ... except for domain 0 */
+       PPC_PCI_COMPAT_DOMAIN_0         = 0x00000020,
+};
+
 
 /*
  * Structure of a PCI controller (host bridge)
@@ -17,26 +44,41 @@
 struct pci_controller {
        struct pci_bus *bus;
        char is_dynamic;
-       void *arch_data;
+#ifdef CONFIG_PPC64
+       int node;
+#endif
+       struct device_node *dn;
        struct list_head list_node;
        struct device *parent;
 
        int first_busno;
        int last_busno;
+#ifndef CONFIG_PPC64
        int self_busno;
+#endif
 
        void __iomem *io_base_virt;
+#ifdef CONFIG_PPC64
+       void *io_base_alloc;
+#endif
        resource_size_t io_base_phys;
+#ifndef CONFIG_PPC64
+       resource_size_t pci_io_size;
+#endif
 
        /* Some machines (PReP) have a non 1:1 mapping of
         * the PCI memory space in the CPU bus space
         */
        resource_size_t pci_mem_offset;
+#ifdef CONFIG_PPC64
+       unsigned long pci_io_size;
+#endif
 
        struct pci_ops *ops;
-       volatile unsigned int __iomem *cfg_addr;
-       volatile void __iomem *cfg_data;
+       unsigned int __iomem *cfg_addr;
+       void __iomem *cfg_data;
 
+#ifndef CONFIG_PPC64
        /*
         * Used for variants of PCI indirect handling and possible quirks:
         *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
@@ -51,21 +93,30 @@
         *   set.
         *  BIG_ENDIAN - cfg_addr is a big endian register
         */
-#define PPC_INDIRECT_TYPE_SET_CFG_TYPE         (0x00000001)
-#define PPC_INDIRECT_TYPE_EXT_REG              (0x00000002)
-#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS (0x00000004)
-#define PPC_INDIRECT_TYPE_NO_PCIE_LINK         (0x00000008)
-#define PPC_INDIRECT_TYPE_BIG_ENDIAN           (0x00000010)
+#define PPC_INDIRECT_TYPE_SET_CFG_TYPE         0x00000001
+#define PPC_INDIRECT_TYPE_EXT_REG              0x00000002
+#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
+#define PPC_INDIRECT_TYPE_NO_PCIE_LINK         0x00000008
+#define PPC_INDIRECT_TYPE_BIG_ENDIAN           0x00000010
        u32 indirect_type;
-
+#endif /* !CONFIG_PPC64 */
        /* Currently, we limit ourselves to 1 IO range and 3 mem
         * ranges since the common pci_bus structure can't handle more
         */
        struct resource io_resource;
        struct resource mem_resources[3];
        int global_number;              /* PCI domain number */
+#ifdef CONFIG_PPC64
+       unsigned long buid;
+       unsigned long dma_window_base_cur;
+       unsigned long dma_window_size;
+
+       void *private_data;
+#endif /* CONFIG_PPC64 */
 };
 
+#ifndef CONFIG_PPC64
+
 static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
 {
        return bus->sysdata;
@@ -81,18 +132,18 @@
 
 /* These are used for config access before all the PCI probing
    has been done. */
-int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
-                          int where, u8 *val);
-int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
-                          int where, u16 *val);
-int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
-                           int where, u32 *val);
-int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
-                           int where, u8 val);
-int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
-                           int where, u16 val);
-int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
-                            int where, u32 val);
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+                       int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+                       int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+                       int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+                       int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+                       int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+                       int dev_fn, int where, u32 val);
 
 extern int early_find_capability(struct pci_controller *hose, int bus,
                                 int dev_fn, int cap);
@@ -101,87 +152,33 @@
                               resource_size_t cfg_addr,
                               resource_size_t cfg_data, u32 flags);
 extern void setup_grackle(struct pci_controller *hose);
-extern void __init update_bridge_resource(struct pci_dev *dev,
-                                         struct resource *res);
-
-#else
-
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
-       struct pci_bus *bus;
-       char is_dynamic;
-       int node;
-       void *arch_data;
-       struct list_head list_node;
-       struct device *parent;
-
-       int first_busno;
-       int last_busno;
-
-       void __iomem *io_base_virt;
-       void *io_base_alloc;
-       resource_size_t io_base_phys;
-
-       /* Some machines have a non 1:1 mapping of
-        * the PCI memory space in the CPU bus space
-        */
-       resource_size_t pci_mem_offset;
-       unsigned long pci_io_size;
-
-       struct pci_ops *ops;
-       volatile unsigned int __iomem *cfg_addr;
-       volatile void __iomem *cfg_data;
-
-       /* Currently, we limit ourselves to 1 IO range and 3 mem
-        * ranges since the common pci_bus structure can't handle more
-        */
-       struct resource io_resource;
-       struct resource mem_resources[3];
-       int global_number;
-       unsigned long buid;
-       unsigned long dma_window_base_cur;
-       unsigned long dma_window_size;
-
-       void *private_data;
-};
+#else  /* CONFIG_PPC64 */
 
 /*
  * PCI stuff, for nodes representing PCI devices, pointed to
  * by device_node->data.
  */
-struct pci_controller;
 struct iommu_table;
 
 struct pci_dn {
        int     busno;                  /* pci bus number */
-       int     bussubno;               /* pci subordinate bus number */
        int     devfn;                  /* pci device and function number */
-       int     class_code;             /* pci device class */
 
        struct  pci_controller *phb;    /* for pci devices */
        struct  iommu_table *iommu_table;       /* for phb's or bridges */
-       struct  pci_dev *pcidev;        /* back-pointer to the pci device */
        struct  device_node *node;      /* back-pointer to the device_node */
 
        int     pci_ext_config_space;   /* for pci devices */
 
 #ifdef CONFIG_EEH
+       struct  pci_dev *pcidev;        /* back-pointer to the pci device */
+       int     class_code;             /* pci device class */
        int     eeh_mode;               /* See eeh.h for possible EEH_MODEs */
        int     eeh_config_addr;
        int     eeh_pe_config_addr; /* new-style partition endpoint address */
-       int     eeh_check_count;        /* # times driver ignored error */
-       int     eeh_freeze_count;       /* # times this device froze up. */
-       int     eeh_false_positives;    /* # times this device reported #ff's */
+       int     eeh_check_count;        /* # times driver ignored error */
+       int     eeh_freeze_count;       /* # times this device froze up. */
+       int     eeh_false_positives;    /* # times this device reported #ff's */
        u32     config_space[16];       /* saved PCI config space */
 #endif
 };
@@ -189,7 +186,7 @@
 /* Get the pointer to a device_node's pci_dn */
 #define PCI_DN(dn)     ((struct pci_dn *) (dn)->data)
 
-struct device_node *fetch_dev_dn(struct pci_dev *dev);
+extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
 
 /* Get a device_node from a pci_dev.  This code must be fast except
  * in the case where the sysdata is incorrect and needs to be fixed
@@ -227,14 +224,14 @@
 }
 
 /** Find the bus corresponding to the indicated device node */
-struct pci_bus * pcibios_find_pci_bus(struct device_node *dn);
+extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
 
 /** Remove all of the PCI devices under this bus */
-void pcibios_remove_pci_devices(struct pci_bus *bus);
+extern void pcibios_remove_pci_devices(struct pci_bus *bus);
 
 /** Discover new pci devices under this bus, and add them */
-void pcibios_add_pci_devices(struct pci_bus * bus);
-void pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus);
+extern void pcibios_add_pci_devices(struct pci_bus *bus);
+extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
 
 extern int pcibios_remove_root_bus(struct pci_controller *phb);
 
@@ -270,20 +267,18 @@
 #define PHB_SET_NODE(PHB, NODE)                ((PHB)->node = -1)
 #endif
 
-#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC64 */
 
 /* Get the PCI host controller for an OF device */
-extern struct pci_controller*
-pci_find_hose_for_OF_device(struct device_node* node);
+extern struct pci_controller *pci_find_hose_for_OF_device(
+                       struct device_node* node);
 
 /* Fill up host controller resources from the OF node */
-extern void
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
-                          struct device_node *dev, int primary);
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+                       struct device_node *dev, int primary);
 
 /* Allocate & free a PCI host bridge structure */
-extern struct pci_controller *
-pcibios_alloc_controller(struct device_node *dev);
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
 
 #ifdef CONFIG_PCI
@@ -298,9 +293,7 @@
 {
        return 0;
 }
-#endif
-
+#endif /* CONFIG_PCI */
 
-
-#endif /* __KERNEL__ */
-#endif
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PCI_BRIDGE_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/pci.h powerpc.git/include/asm-powerpc/pci.h
--- linux-2.6.24/include/asm-powerpc/pci.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/pci.h       2008-01-28 20:26:42.000000000 +0100
@@ -36,11 +36,10 @@
 
 /*
  * Set this to 1 if you want the kernel to re-assign all PCI
- * bus numbers
+ * bus numbers (don't do that on ppc64 yet !)
  */
-extern int pci_assign_all_buses;
-#define pcibios_assign_all_busses()    (pci_assign_all_buses)
-
+#define pcibios_assign_all_busses()            (ppc_pci_flags & \
+                                        PPC_PCI_REASSIGN_ALL_BUS)
 #define pcibios_scan_all_fns(a, b)     0
 
 static inline void pcibios_set_master(struct pci_dev *dev)
@@ -95,9 +94,6 @@
 #define get_pci_dma_ops()      NULL
 #endif
 
-/* Decide whether to display the domain number in /proc */
-extern int pci_proc_domain(struct pci_bus *bus);
-
 #else /* 32-bit */
 
 #ifdef CONFIG_PCI
@@ -109,17 +105,14 @@
        *strategy_parameter = ~0UL;
 }
 #endif
-
-/* Set the name of the bus as it appears in /proc/bus/pci */
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-       return 0;
-}
-
 #endif /* CONFIG_PPC64 */
 
 extern int pci_domain_nr(struct pci_bus *bus);
 
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+
 struct vm_area_struct;
 /* Map a range of PCI memory or I/O space for a device into user space */
 int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
@@ -199,13 +192,12 @@
        return root;
 }
 
-extern void pcibios_fixup_device_resources(struct pci_dev *dev,
-                       struct pci_bus *bus);
-
 extern void pcibios_setup_new_device(struct pci_dev *dev);
 
 extern void pcibios_claim_one_bus(struct pci_bus *b);
 
+extern void pcibios_resource_survey(void);
+
 extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
 
 extern struct pci_dev *of_create_pci_dev(struct device_node *node,
@@ -229,5 +221,8 @@
                                 const struct resource *rsrc,
                                 resource_size_t *start, resource_size_t *end);
 
+extern void pcibios_do_bus_setup(struct pci_bus *bus);
+extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_PCI_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/ppc-pci.h powerpc.git/include/asm-powerpc/ppc-pci.h
--- linux-2.6.24/include/asm-powerpc/ppc-pci.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/ppc-pci.h   2008-01-28 20:26:42.000000000 +0100
@@ -22,7 +22,6 @@
 
 
 extern struct list_head hose_list;
-extern int global_phb_number;
 
 extern void find_and_init_phbs(void);
 
@@ -47,9 +46,6 @@
 extern unsigned long get_phb_buid (struct device_node *);
 extern int rtas_setup_phb(struct pci_controller *phb);
 
-/* From iSeries PCI */
-extern void iSeries_pcibios_init(void);
-
 extern unsigned long pci_probe_only;
 
 /* ---- EEH internal-use-only related routines ---- */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/prom.h powerpc.git/include/asm-powerpc/prom.h
--- linux-2.6.24/include/asm-powerpc/prom.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/prom.h      2008-01-28 20:26:42.000000000 +0100
@@ -202,6 +202,10 @@
  */
 extern u64 of_translate_address(struct device_node *np, const u32 *addr);
 
+/* Translate a DMA address from device space to CPU space */
+extern u64 of_translate_dma_address(struct device_node *dev,
+                                   const u32 *in_addr);
+
 /* Extract an address from a device, returns the region size and
  * the address space flags too. The PCI version uses a BAR number
  * instead of an absolute index
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/ps3.h powerpc.git/include/asm-powerpc/ps3.h
--- linux-2.6.24/include/asm-powerpc/ps3.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/ps3.h       2008-01-28 20:26:42.000000000 +0100
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/device.h>
+#include "cell-pmu.h"
 
 union ps3_firmware_version {
        u64 raw;
@@ -317,6 +318,7 @@
        PS3_MATCH_ID_STOR_FLASH     = 8,
        PS3_MATCH_ID_SOUND          = 9,
        PS3_MATCH_ID_GRAPHICS       = 10,
+       PS3_MATCH_ID_LPM            = 11,
 };
 
 #define PS3_MODULE_ALIAS_EHCI           "ps3:1"
@@ -329,11 +331,13 @@
 #define PS3_MODULE_ALIAS_STOR_FLASH     "ps3:8"
 #define PS3_MODULE_ALIAS_SOUND          "ps3:9"
 #define PS3_MODULE_ALIAS_GRAPHICS       "ps3:10"
+#define PS3_MODULE_ALIAS_LPM            "ps3:11"
 
 enum ps3_system_bus_device_type {
        PS3_DEVICE_TYPE_IOC0 = 1,
        PS3_DEVICE_TYPE_SB,
        PS3_DEVICE_TYPE_VUART,
+       PS3_DEVICE_TYPE_LPM,
 };
 
 /**
@@ -344,12 +348,17 @@
        enum ps3_match_id match_id;
        enum ps3_system_bus_device_type dev_type;
 
-       unsigned int bus_id;              /* SB */
-       unsigned int dev_id;              /* SB */
+       u64 bus_id;                       /* SB */
+       u64 dev_id;                       /* SB */
        unsigned int interrupt_id;        /* SB */
        struct ps3_dma_region *d_region;  /* SB, IOC0 */
        struct ps3_mmio_region *m_region; /* SB, IOC0*/
        unsigned int port_number;         /* VUART */
+       struct {                          /* LPM */
+               u64 node_id;
+               u64 pu_id;
+               u64 rights;
+       } lpm;
 
 /*     struct iommu_table *iommu_table; -- waiting for BenH's cleanups */
        struct device core;
@@ -438,5 +447,66 @@
 extern struct ps3_prealloc ps3fb_videomemory;
 extern struct ps3_prealloc ps3flash_bounce_buffer;
 
+/* logical performance monitor */
+
+/**
+ * enum ps3_lpm_rights - Rigths granted by the system policy module.
+ *
+ * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm.
+ * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer.
+ */
+
+enum ps3_lpm_rights {
+       PS3_LPM_RIGHTS_USE_LPM = 0x001,
+       PS3_LPM_RIGHTS_USE_TB = 0x100,
+};
+
+/**
+ * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use.
+ *
+ * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer.
+ * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer.  Must have
+ *  rights @PS3_LPM_RIGHTS_USE_TB.
+ */
+
+enum ps3_lpm_tb_type {
+       PS3_LPM_TB_TYPE_NONE = 0,
+       PS3_LPM_TB_TYPE_INTERNAL = 1,
+};
+
+int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
+       u64 tb_cache_size);
+int ps3_lpm_close(void);
+int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
+       unsigned long *bytes_copied);
+int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
+       unsigned long count, unsigned long *bytes_copied);
+void ps3_set_bookmark(u64 bookmark);
+void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id);
+int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit,
+       u8 bus_word);
+
+u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr);
+void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+u32 ps3_read_ctr(u32 cpu, u32 ctr);
+void ps3_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+u32 ps3_read_pm07_control(u32 cpu, u32 ctr);
+void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg);
+void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr);
+void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+void ps3_enable_pm(u32 cpu);
+void ps3_disable_pm(u32 cpu);
+void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+void ps3_disable_pm_interrupts(u32 cpu);
+
+u32 ps3_get_and_clear_pm_interrupts(u32 cpu);
+void ps3_sync_irq(int node);
+u32 ps3_get_hw_thread_id(int cpu);
+u64 ps3_get_spe_id(void *arg);
 
 #endif
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/ptrace.h powerpc.git/include/asm-powerpc/ptrace.h
--- linux-2.6.24/include/asm-powerpc/ptrace.h   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/ptrace.h    2008-01-28 20:26:42.000000000 +0100
@@ -106,7 +106,8 @@
  */
 #define FULL_REGS(regs)                (((regs)->trap & 1) == 0)
 #ifndef __powerpc64__
-#define IS_CRITICAL_EXC(regs)  (((regs)->trap & 2) == 0)
+#define IS_CRITICAL_EXC(regs)  (((regs)->trap & 2) != 0)
+#define IS_MCHECK_EXC(regs)    (((regs)->trap & 4) != 0)
 #endif /* ! __powerpc64__ */
 #define TRAP(regs)             ((regs)->trap & ~0xF)
 #ifdef __powerpc64__
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/qe.h powerpc.git/include/asm-powerpc/qe.h
--- linux-2.6.24/include/asm-powerpc/qe.h       2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/qe.h        2008-01-28 20:26:42.000000000 +0100
@@ -28,6 +28,52 @@
 #define MEM_PART_SECONDARY     1
 #define MEM_PART_MURAM         2
 
+/* Clocks and BRGs */
+enum qe_clock {
+       QE_CLK_NONE = 0,
+       QE_BRG1,                /* Baud Rate Generator 1 */
+       QE_BRG2,                /* Baud Rate Generator 2 */
+       QE_BRG3,                /* Baud Rate Generator 3 */
+       QE_BRG4,                /* Baud Rate Generator 4 */
+       QE_BRG5,                /* Baud Rate Generator 5 */
+       QE_BRG6,                /* Baud Rate Generator 6 */
+       QE_BRG7,                /* Baud Rate Generator 7 */
+       QE_BRG8,                /* Baud Rate Generator 8 */
+       QE_BRG9,                /* Baud Rate Generator 9 */
+       QE_BRG10,               /* Baud Rate Generator 10 */
+       QE_BRG11,               /* Baud Rate Generator 11 */
+       QE_BRG12,               /* Baud Rate Generator 12 */
+       QE_BRG13,               /* Baud Rate Generator 13 */
+       QE_BRG14,               /* Baud Rate Generator 14 */
+       QE_BRG15,               /* Baud Rate Generator 15 */
+       QE_BRG16,               /* Baud Rate Generator 16 */
+       QE_CLK1,                /* Clock 1 */
+       QE_CLK2,                /* Clock 2 */
+       QE_CLK3,                /* Clock 3 */
+       QE_CLK4,                /* Clock 4 */
+       QE_CLK5,                /* Clock 5 */
+       QE_CLK6,                /* Clock 6 */
+       QE_CLK7,                /* Clock 7 */
+       QE_CLK8,                /* Clock 8 */
+       QE_CLK9,                /* Clock 9 */
+       QE_CLK10,               /* Clock 10 */
+       QE_CLK11,               /* Clock 11 */
+       QE_CLK12,               /* Clock 12 */
+       QE_CLK13,               /* Clock 13 */
+       QE_CLK14,               /* Clock 14 */
+       QE_CLK15,               /* Clock 15 */
+       QE_CLK16,               /* Clock 16 */
+       QE_CLK17,               /* Clock 17 */
+       QE_CLK18,               /* Clock 18 */
+       QE_CLK19,               /* Clock 19 */
+       QE_CLK20,               /* Clock 20 */
+       QE_CLK21,               /* Clock 21 */
+       QE_CLK22,               /* Clock 22 */
+       QE_CLK23,               /* Clock 23 */
+       QE_CLK24,               /* Clock 24 */
+       QE_CLK_DUMMY
+};
+
 /* Export QE common operations */
 extern void qe_reset(void);
 extern int par_io_init(struct device_node *np);
@@ -38,7 +84,8 @@
 
 /* QE internal API */
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier);
+enum qe_clock qe_clock_source(const char *source);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned long qe_muram_alloc(int size, int align);
@@ -47,6 +94,58 @@
 void qe_muram_dump(void);
 void *qe_muram_addr(unsigned long offset);
 
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe-firmware.txt for a description of these
+ * fields.
+ */
+struct qe_firmware {
+       struct qe_header {
+               __be32 length;  /* Length of the entire structure, in bytes */
+               u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
+               u8 version;     /* Version of this layout. First ver is '1' */
+       } header;
+       u8 id[62];      /* Null-terminated identifier string */
+       u8 split;       /* 0 = shared I-RAM, 1 = split I-RAM */
+       u8 count;       /* Number of microcode[] structures */
+       struct {
+               __be16 model;           /* The SOC model  */
+               u8 major;               /* The SOC revision major */
+               u8 minor;               /* The SOC revision minor */
+       } __attribute__ ((packed)) soc;
+       u8 padding[4];                  /* Reserved, for alignment */
+       __be64 extended_modes;          /* Extended modes */
+       __be32 vtraps[8];               /* Virtual trap addresses */
+       u8 reserved[4];                 /* Reserved, for future expansion */
+       struct qe_microcode {
+               u8 id[32];              /* Null-terminated identifier */
+               __be32 traps[16];       /* Trap addresses, 0 == ignore */
+               __be32 eccr;            /* The value for the ECCR register */
+               __be32 iram_offset;     /* Offset into I-RAM for the code */
+               __be32 count;           /* Number of 32-bit words of the code */
+               __be32 code_offset;     /* Offset of the actual microcode */
+               u8 major;               /* The microcode version major */
+               u8 minor;               /* The microcode version minor */
+               u8 revision;            /* The microcode version revision */
+               u8 padding;             /* Reserved, for alignment */
+               u8 reserved[4];         /* Reserved, for future expansion */
+       } __attribute__ ((packed)) microcode[1];
+       /* All microcode binaries should be located here */
+       /* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+       char id[64];            /* Firmware name */
+       u32 vtraps[8];          /* Virtual trap addresses */
+       u64 extended_modes;     /* Extended modes */
+};
+
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
 /* Buffer descriptors */
 struct qe_bd {
        __be16 status;
@@ -129,52 +228,6 @@
        COMM_DIR_RX_AND_TX = 3
 };
 
-/* Clocks and BRGs */
-enum qe_clock {
-       QE_CLK_NONE = 0,
-       QE_BRG1,                /* Baud Rate Generator 1 */
-       QE_BRG2,                /* Baud Rate Generator 2 */
-       QE_BRG3,                /* Baud Rate Generator 3 */
-       QE_BRG4,                /* Baud Rate Generator 4 */
-       QE_BRG5,                /* Baud Rate Generator 5 */
-       QE_BRG6,                /* Baud Rate Generator 6 */
-       QE_BRG7,                /* Baud Rate Generator 7 */
-       QE_BRG8,                /* Baud Rate Generator 8 */
-       QE_BRG9,                /* Baud Rate Generator 9 */
-       QE_BRG10,               /* Baud Rate Generator 10 */
-       QE_BRG11,               /* Baud Rate Generator 11 */
-       QE_BRG12,               /* Baud Rate Generator 12 */
-       QE_BRG13,               /* Baud Rate Generator 13 */
-       QE_BRG14,               /* Baud Rate Generator 14 */
-       QE_BRG15,               /* Baud Rate Generator 15 */
-       QE_BRG16,               /* Baud Rate Generator 16 */
-       QE_CLK1,                /* Clock 1 */
-       QE_CLK2,                /* Clock 2 */
-       QE_CLK3,                /* Clock 3 */
-       QE_CLK4,                /* Clock 4 */
-       QE_CLK5,                /* Clock 5 */
-       QE_CLK6,                /* Clock 6 */
-       QE_CLK7,                /* Clock 7 */
-       QE_CLK8,                /* Clock 8 */
-       QE_CLK9,                /* Clock 9 */
-       QE_CLK10,               /* Clock 10 */
-       QE_CLK11,               /* Clock 11 */
-       QE_CLK12,               /* Clock 12 */
-       QE_CLK13,               /* Clock 13 */
-       QE_CLK14,               /* Clock 14 */
-       QE_CLK15,               /* Clock 15 */
-       QE_CLK16,               /* Clock 16 */
-       QE_CLK17,               /* Clock 17 */
-       QE_CLK18,               /* Clock 18 */
-       QE_CLK19,               /* Clock 19 */
-       QE_CLK20,               /* Clock 20 */
-       QE_CLK21,               /* Clock 21 */
-       QE_CLK22,               /* Clock 22 */
-       QE_CLK23,               /* Clock 23 */
-       QE_CLK24,               /* Clock 24 */
-       QE_CLK_DUMMY,
-};
-
 /* QE CMXUCR Registers.
  * There are two UCCs represented in each of the four CMXUCR registers.
  * These values are for the UCC in the LSBs
@@ -328,6 +381,15 @@
 
 #define QE_SDEBCR_BA_MASK      0x01FFFFFF
 
+/* Communication Processor */
+#define QE_CP_CERCR_MEE                0x8000  /* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE                0x4000  /* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR                0x0800  /* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE       0x80000000      /* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR     0x00080000      /* Base Address */
+
 /* UPC */
 #define UPGCR_PROTOCOL 0x80000000      /* protocol ul2 or pl2 */
 #define UPGCR_TMS      0x40000000      /* Transmit master/slave mode */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/reg.h powerpc.git/include/asm-powerpc/reg.h
--- linux-2.6.24/include/asm-powerpc/reg.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/reg.h       2008-01-28 20:26:42.000000000 +0100
@@ -553,6 +553,7 @@
 #define SPRN_PA6T_BTCR 978     /* Breakpoint and Tagging Control Register */
 #define SPRN_PA6T_IMAAT        979     /* Instruction Match Array Action Table */
 #define SPRN_PA6T_PCCR 1019    /* Power Counter Control Register */
+#define SPRN_BKMK      1020    /* Cell Bookmark Register */
 #define SPRN_PA6T_RPCCR        1021    /* Retire PC Trace Control Register */
 
 
@@ -691,12 +692,6 @@
 #define PV_BE          0x0070
 #define PV_PA6T                0x0090
 
-/*
- * Number of entries in the SLB. If this ever changes we should handle
- * it with a use a cpu feature fixup.
- */
-#define SLB_NUM_ENTRIES 64
-
 /* Macros for setting and retrieving special purpose registers */
 #ifndef __ASSEMBLY__
 #define mfmsr()                ({unsigned long rval; \
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/reg_booke.h powerpc.git/include/asm-powerpc/reg_booke.h
--- linux-2.6.24/include/asm-powerpc/reg_booke.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/reg_booke.h 2008-01-28 20:26:42.000000000 +0100
@@ -123,16 +123,23 @@
 #define SPRN_SPEFSCR   0x200   /* SPE & Embedded FP Status & Control */
 #define SPRN_BBEAR     0x201   /* Branch Buffer Entry Address Register */
 #define SPRN_BBTAR     0x202   /* Branch Buffer Target Address Register */
+#define SPRN_ATB       0x20E   /* Alternate Time Base */
+#define SPRN_ATBL      0x20E   /* Alternate Time Base Lower */
+#define SPRN_ATBU      0x20F   /* Alternate Time Base Upper */
 #define SPRN_IVOR32    0x210   /* Interrupt Vector Offset Register 32 */
 #define SPRN_IVOR33    0x211   /* Interrupt Vector Offset Register 33 */
 #define SPRN_IVOR34    0x212   /* Interrupt Vector Offset Register 34 */
 #define SPRN_IVOR35    0x213   /* Interrupt Vector Offset Register 35 */
+#define SPRN_IVOR36    0x214   /* Interrupt Vector Offset Register 36 */
+#define SPRN_IVOR37    0x215   /* Interrupt Vector Offset Register 37 */
 #define SPRN_MCSRR0    0x23A   /* Machine Check Save and Restore Register 0 */
 #define SPRN_MCSRR1    0x23B   /* Machine Check Save and Restore Register 1 */
 #define SPRN_MCSR      0x23C   /* Machine Check Status Register */
 #define SPRN_MCAR      0x23D   /* Machine Check Address Register */
 #define SPRN_DSRR0     0x23E   /* Debug Save and Restore Register 0 */
 #define SPRN_DSRR1     0x23F   /* Debug Save and Restore Register 1 */
+#define SPRN_SPRG8     0x25C   /* Special Purpose Register General 8 */
+#define SPRN_SPRG9     0x25D   /* Special Purpose Register General 9 */
 #define SPRN_MAS0      0x270   /* MMU Assist Register 0 */
 #define SPRN_MAS1      0x271   /* MMU Assist Register 1 */
 #define SPRN_MAS2      0x272   /* MMU Assist Register 2 */
@@ -140,15 +147,18 @@
 #define SPRN_MAS4      0x274   /* MMU Assist Register 4 */
 #define SPRN_MAS5      0x275   /* MMU Assist Register 5 */
 #define SPRN_MAS6      0x276   /* MMU Assist Register 6 */
-#define SPRN_MAS7      0x3b0   /* MMU Assist Register 7 */
 #define SPRN_PID1      0x279   /* Process ID Register 1 */
 #define SPRN_PID2      0x27A   /* Process ID Register 2 */
 #define SPRN_TLB0CFG   0x2B0   /* TLB 0 Config Register */
 #define SPRN_TLB1CFG   0x2B1   /* TLB 1 Config Register */
+#define SPRN_EPR       0x2BE   /* External Proxy Register */
 #define SPRN_CCR1      0x378   /* Core Configuration Register 1 */
 #define SPRN_ZPR       0x3B0   /* Zone Protection Register (40x) */
+#define SPRN_MAS7      0x3B0   /* MMU Assist Register 7 */
 #define SPRN_MMUCR     0x3B2   /* MMU Control Register */
 #define SPRN_CCR0      0x3B3   /* Core Configuration Register 0 */
+#define SPRN_EPLC      0x3B3   /* External Process ID Load Context */
+#define SPRN_EPSC      0x3B4   /* External Process ID Store Context */
 #define SPRN_SGR       0x3B9   /* Storage Guarded Register */
 #define SPRN_DCWR      0x3BA   /* Data Cache Write-thru Register */
 #define SPRN_SLER      0x3BB   /* Little-endian real mode */
@@ -159,6 +169,7 @@
 #define SPRN_L1CSR0    0x3F2   /* L1 Cache Control and Status Register 0 */
 #define SPRN_L1CSR1    0x3F3   /* L1 Cache Control and Status Register 1 */
 #define SPRN_PIT       0x3DB   /* Programmable Interval Timer */
+#define SPRN_BUCSR     0x3F5   /* Branch Unit Control and Status */
 #define SPRN_DCCR      0x3FA   /* Data Cache Cacheability Register */
 #define SPRN_ICCR      0x3FB   /* Instruction Cache Cacheability Register */
 #define SPRN_SVR       0x3FF   /* System Version Register */
@@ -207,7 +218,6 @@
 #define        CCR1_TCS        0x00000080 /* Timer Clock Select */
 
 /* Bit definitions for the MCSR. */
-#ifdef CONFIG_440A
 #define MCSR_MCS       0x80000000 /* Machine Check Summary */
 #define MCSR_IB                0x40000000 /* Instruction PLB Error */
 #define MCSR_DRB       0x20000000 /* Data Read PLB Error */
@@ -217,7 +227,7 @@
 #define MCSR_DCSP      0x02000000 /* D-Cache Search Parity Error */
 #define MCSR_DCFP      0x01000000 /* D-Cache Flush Parity Error */
 #define MCSR_IMPE      0x00800000 /* Imprecise Machine Check Exception */
-#endif
+
 #ifdef CONFIG_E500
 #define MCSR_MCP       0x80000000UL /* Machine Check Input Pin */
 #define MCSR_ICPERR    0x40000000UL /* I-Cache Parity Error */
@@ -293,7 +303,7 @@
 #define ESR_IMCB       0x20000000      /* Instr. Machine Check - Bus error */
 #define ESR_IMCT       0x10000000      /* Instr. Machine Check - Timeout */
 #define ESR_PIL                0x08000000      /* Program Exception - Illegal */
-#define ESR_PPR                0x04000000      /* Program Exception - Priveleged */
+#define ESR_PPR                0x04000000      /* Program Exception - Privileged */
 #define ESR_PTR                0x02000000      /* Program Exception - Trap */
 #define ESR_FP         0x01000000      /* Floating Point Operation */
 #define ESR_DST                0x00800000      /* Storage Exception - Data miss */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/setjmp.h powerpc.git/include/asm-powerpc/setjmp.h
--- linux-2.6.24/include/asm-powerpc/setjmp.h   1970-01-01 01:00:00.000000000 +0100
+++ powerpc.git/include/asm-powerpc/setjmp.h    2008-01-28 20:26:42.000000000 +0100
@@ -0,0 +1,18 @@
+/*
+ * Copyright © 2008 Michael Neuling IBM Corporation
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _ASM_POWERPC_SETJMP_H
+#define _ASM_POWERPC_SETJMP_H
+
+#define JMP_BUF_LEN    23
+
+extern long setjmp(long *);
+extern void longjmp(long *, long);
+
+#endif /* _ASM_POWERPC_SETJMP_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/smu.h powerpc.git/include/asm-powerpc/smu.h
--- linux-2.6.24/include/asm-powerpc/smu.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/smu.h       2008-01-28 20:26:42.000000000 +0100
@@ -22,7 +22,7 @@
  * Partition info commands
  *
  * These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The lenght is always 2. First byte is the subcommand code
+ * the SMU. The length is always 2. First byte is the subcommand code
  * and second byte is the partition ID.
  *
  * The reply is 6 bytes:
@@ -173,12 +173,12 @@
  * Power supply control
  *
  * The "sub" command is an ASCII string in the data, the
- * data lenght is that of the string.
+ * data length is that of the string.
  *
  * The VSLEW command can be used to get or set the voltage slewing.
- *  - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
  *    reply at data offset 6, 7 and 8.
- *  - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
  *    used to set the voltage slewing point. The SMU replies with "DONE"
  * I yet have to figure out their exact meaning of those 3 bytes in
  * both cases. They seem to be:
@@ -201,20 +201,90 @@
  */
 #define SMU_CMD_READ_ADC                       0xd8
 
+
 /* Misc commands
  *
  * This command seem to be a grab bag of various things
+ *
+ * Parameters:
+ *   1: subcommand
  */
 #define SMU_CMD_MISC_df_COMMAND                        0xdf
-#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT      0x02 /* i: 1 byte */
+
+/*
+ * Sets "system ready" status
+ *
+ * I did not yet understand how it exactly works or what it does.
+ *
+ * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
+ * the same codebase for all OF versions. On PowerBooks, this command would
+ * enable the backlight. For the G5s, it only activates the front LED. However,
+ * don't take this for granted.
+ *
+ * Parameters:
+ *   2: status [0x00, 0x01 or 0x02]
+ */
+#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT      0x02
+
+/*
+ * Sets mode of power switch.
+ *
+ * What this actually does is not yet known. Maybe it enables some interrupt.
+ *
+ * Parameters:
+ *   2: enable power switch? [0x00 or 0x01]
+ *   3 (optional): enable nmi? [0x00 or 0x01]
+ *
+ * Returns:
+ *   If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
+ *   NMI is enabled. Otherwise unknown.
+ */
 #define   SMU_CMD_MISC_df_NMI_OPTION           0x04
 
+/* Sets LED dimm offset.
+ *
+ * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
+ * frequency) depends on current time. Therefore, the SMU needs to know the
+ * timezone.
+ *
+ * Parameters:
+ *   2-8: unknown (BCD coding)
+ */
+#define   SMU_CMD_MISC_df_DIMM_OFFSET          0x99
+
+
 /*
  * Version info commands
  *
- * I haven't quite tried to figure out how these work
+ * Parameters:
+ *   1 (optional): Specifies version part to retrieve
+ *
+ * Returns:
+ *   Version value
  */
 #define SMU_CMD_VERSION_COMMAND                        0xea
+#define   SMU_VERSION_RUNNING                  0x00
+#define   SMU_VERSION_BASE                     0x01
+#define   SMU_VERSION_UPDATE                   0x02
+
+
+/*
+ * Switches
+ *
+ * These are switches whose status seems to be known to the SMU.
+ *
+ * Parameters:
+ *   none
+ *
+ * Result:
+ *   Switch bits (ORed, see below)
+ */
+#define SMU_CMD_SWITCHES                       0xdc
+
+/* Switches bits */
+#define SMU_SWITCH_CASE_CLOSED                 0x01
+#define SMU_SWITCH_AC_POWER                    0x04
+#define SMU_SWITCH_POWER_SWITCH                        0x08
 
 
 /*
@@ -243,10 +313,64 @@
  */
 #define SMU_CMD_MISC_ee_COMMAND                        0xee
 #define   SMU_CMD_MISC_ee_GET_DATABLOCK_REC    0x02
-#define          SMU_CMD_MISC_ee_LEDS_CTRL             0x04 /* i: 00 (00,01) [00] */
+
+/* Retrieves currently used watts.
+ *
+ * Parameters:
+ *   1: 0x03 (Meaning unknown)
+ */
+#define   SMU_CMD_MISC_ee_GET_WATTS            0x03
+
+#define   SMU_CMD_MISC_ee_LEDS_CTRL            0x04 /* i: 00 (00,01) [00] */
 #define   SMU_CMD_MISC_ee_GET_DATA             0x05 /* i: 00 , o: ?? */
 
 
+/*
+ * Power related commands
+ *
+ * Parameters:
+ *   1: subcommand
+ */
+#define SMU_CMD_POWER_EVENTS_COMMAND           0x8f
+
+/* SMU_POWER_EVENTS subcommands */
+enum {
+       SMU_PWR_GET_POWERUP_EVENTS      = 0x00,
+       SMU_PWR_SET_POWERUP_EVENTS      = 0x01,
+       SMU_PWR_CLR_POWERUP_EVENTS      = 0x02,
+       SMU_PWR_GET_WAKEUP_EVENTS       = 0x03,
+       SMU_PWR_SET_WAKEUP_EVENTS       = 0x04,
+       SMU_PWR_CLR_WAKEUP_EVENTS       = 0x05,
+
+       /*
+        * Get last shutdown cause
+        *
+        * Returns:
+        *   1 byte (signed char): Last shutdown cause. Exact meaning unknown.
+        */
+       SMU_PWR_LAST_SHUTDOWN_CAUSE     = 0x07,
+
+       /*
+        * Sets or gets server ID. Meaning or use is unknown.
+        *
+        * Parameters:
+        *   2 (optional): Set server ID (1 byte)
+        *
+        * Returns:
+        *   1 byte (server ID?)
+        */
+       SMU_PWR_SERVER_ID               = 0x08,
+};
+
+/* Power events wakeup bits */
+enum {
+       SMU_PWR_WAKEUP_KEY              = 0x01, /* Wake on key press */
+       SMU_PWR_WAKEUP_AC_INSERT        = 0x02, /* Wake on AC adapter plug */
+       SMU_PWR_WAKEUP_AC_CHANGE        = 0x04,
+       SMU_PWR_WAKEUP_LID_OPEN         = 0x08,
+       SMU_PWR_WAKEUP_RING             = 0x10,
+};
+
 
 /*
  * - Kernel side interface -
@@ -564,13 +688,13 @@
 
        __u8            cmd;                    /* SMU command byte */
        __u8            pad[3];                 /* padding */
-       __u32           data_len;               /* Lenght of data following */
+       __u32           data_len;               /* Length of data following */
 };
 
 struct smu_user_reply_hdr
 {
        __u32           status;                 /* Command status */
-       __u32           reply_len;              /* Lenght of data follwing */
+       __u32           reply_len;              /* Length of data follwing */
 };
 
 #endif /*  _SMU_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/sparsemem.h powerpc.git/include/asm-powerpc/sparsemem.h
--- linux-2.6.24/include/asm-powerpc/sparsemem.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/sparsemem.h 2008-01-28 20:26:42.000000000 +0100
@@ -10,13 +10,8 @@
  */
 #define SECTION_SIZE_BITS       24
 
-#if defined(CONFIG_PS3_USE_LPAR_ADDR)
-#define MAX_PHYSADDR_BITS       47
-#define MAX_PHYSMEM_BITS        47
-#else
 #define MAX_PHYSADDR_BITS       44
 #define MAX_PHYSMEM_BITS        44
-#endif
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 extern void create_section_mapping(unsigned long start, unsigned long end);
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/spu.h powerpc.git/include/asm-powerpc/spu.h
--- linux-2.6.24/include/asm-powerpc/spu.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/spu.h       2008-01-28 20:26:42.000000000 +0100
@@ -104,6 +104,7 @@
 
 struct spu_context;
 struct spu_runqueue;
+struct spu_lscsa;
 struct device_node;
 
 enum spu_utilization_state {
@@ -145,7 +146,6 @@
        void (* ibox_callback)(struct spu *spu);
        void (* stop_callback)(struct spu *spu);
        void (* mfc_callback)(struct spu *spu);
-       void (* dma_callback)(struct spu *spu, int type);
 
        char irq_c0[8];
        char irq_c1[8];
@@ -196,10 +196,11 @@
 extern struct cbe_spu_info cbe_spu_info[];
 
 void spu_init_channels(struct spu *spu);
-int spu_irq_class_0_bottom(struct spu *spu);
-int spu_irq_class_1_bottom(struct spu *spu);
 void spu_irq_setaffinity(struct spu *spu, int cpu);
 
+void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
+               void *code, int code_size);
+
 #ifdef CONFIG_KEXEC
 void crash_register_spus(struct list_head *list);
 #else
@@ -210,6 +211,7 @@
 
 extern void spu_invalidate_slbs(struct spu *spu);
 extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
+int spu_64k_pages_available(void);
 
 /* Calls from the memory management to the SPU */
 struct mm_struct;
@@ -279,6 +281,8 @@
 int spu_add_sysdev_attr_group(struct attribute_group *attrs);
 void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
 
+int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
+               unsigned long dsisr, unsigned *flt);
 
 /*
  * Notifier blocks:
@@ -303,7 +307,7 @@
 extern void do_notify_spus_active(void);
 
 /*
- * This defines the Local Store, Problem Area and Privlege Area of an SPU.
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
  */
 
 union mfc_tag_size_class_cmd {
@@ -524,8 +528,24 @@
 #define CLASS2_ENABLE_SPU_STOP_INTR                    0x2L
 #define CLASS2_ENABLE_SPU_HALT_INTR                    0x4L
 #define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR  0x8L
+#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR           0x10L
        u8  pad_0x118_0x140[0x28];                              /* 0x118 */
        u64 int_stat_RW[3];                                     /* 0x140 */
+#define CLASS0_DMA_ALIGNMENT_INTR                      0x1L
+#define CLASS0_INVALID_DMA_COMMAND_INTR                        0x2L
+#define CLASS0_SPU_ERROR_INTR                          0x4L
+#define CLASS0_INTR_MASK                               0x7L
+#define CLASS1_SEGMENT_FAULT_INTR                      0x1L
+#define CLASS1_STORAGE_FAULT_INTR                      0x2L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR          0x4L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR          0x8L
+#define CLASS1_INTR_MASK                               0xfL
+#define CLASS2_MAILBOX_INTR                            0x1L
+#define CLASS2_SPU_STOP_INTR                           0x2L
+#define CLASS2_SPU_HALT_INTR                           0x4L
+#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR         0x8L
+#define CLASS2_MAILBOX_THRESHOLD_INTR                  0x10L
+#define CLASS2_INTR_MASK                               0x1fL
        u8  pad_0x158_0x180[0x28];                              /* 0x158 */
        u64 int_route_RW;                                       /* 0x180 */
 
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/spu_csa.h powerpc.git/include/asm-powerpc/spu_csa.h
--- linux-2.6.24/include/asm-powerpc/spu_csa.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/spu_csa.h   2008-01-28 20:26:42.000000000 +0100
@@ -194,7 +194,7 @@
 };
 
 /*
- * struct spu_priv2_collapsed - condensed priviliged 2 area, w/o pads.
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
  */
 struct spu_priv2_collapsed {
        u64 slb_index_W;
@@ -254,20 +254,11 @@
        u64 spu_chnldata_RW[32];
        u32 spu_mailbox_data[4];
        u32 pu_mailbox_data[1];
-       u64 dar, dsisr;
+       u64 dar, dsisr, class_0_pending;
        unsigned long suspend_time;
        spinlock_t register_lock;
 };
 
-extern int spu_init_csa(struct spu_state *csa);
-extern void spu_fini_csa(struct spu_state *csa);
-extern int spu_save(struct spu_state *prev, struct spu *spu);
-extern int spu_restore(struct spu_state *new, struct spu *spu);
-extern int spu_switch(struct spu_state *prev, struct spu_state *new,
-                     struct spu *spu);
-extern int spu_alloc_lscsa(struct spu_state *csa);
-extern void spu_free_lscsa(struct spu_state *csa);
-
 #endif /* !__SPU__ */
 #endif /* __KERNEL__ */
 #endif /* !__ASSEMBLY__ */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/spu_priv1.h powerpc.git/include/asm-powerpc/spu_priv1.h
--- linux-2.6.24/include/asm-powerpc/spu_priv1.h        2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/spu_priv1.h 2008-01-28 20:26:42.000000000 +0100
@@ -24,6 +24,7 @@
 #include <linux/types.h>
 
 struct spu;
+struct spu_context;
 
 /* access to priv1 registers */
 
@@ -178,6 +179,8 @@
        int (*enumerate_spus)(int (*fn)(void *data));
        int (*create_spu)(struct spu *spu, void *data);
        int (*destroy_spu)(struct spu *spu);
+       void (*enable_spu)(struct spu_context *ctx);
+       void (*disable_spu)(struct spu_context *ctx);
        int (*init_affinity)(void);
 };
 
@@ -207,6 +210,18 @@
        return spu_management_ops->init_affinity();
 }
 
+static inline void
+spu_enable_spu (struct spu_context *ctx)
+{
+       spu_management_ops->enable_spu(ctx);
+}
+
+static inline void
+spu_disable_spu (struct spu_context *ctx)
+{
+       spu_management_ops->disable_spu(ctx);
+}
+
 /*
  * The declarations folowing are put here for convenience
  * and only intended to be used by the platform setup code.
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/system.h powerpc.git/include/asm-powerpc/system.h
--- linux-2.6.24/include/asm-powerpc/system.h   2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/system.h    2008-01-28 20:26:42.000000000 +0100
@@ -169,6 +169,8 @@
 extern void bad_page_fault(struct pt_regs *, unsigned long, int);
 extern int die(const char *, struct pt_regs *, long);
 extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
 #ifdef CONFIG_BOOKE_WDT
 extern u32 booke_wdt_enabled;
 extern u32 booke_wdt_period;
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-powerpc/udbg.h powerpc.git/include/asm-powerpc/udbg.h
--- linux-2.6.24/include/asm-powerpc/udbg.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-powerpc/udbg.h      2008-01-28 20:26:42.000000000 +0100
@@ -48,6 +48,7 @@
 extern void __init udbg_init_debug_beat(void);
 extern void __init udbg_init_btext(void);
 extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_40x_realmode(void);
 extern void __init udbg_init_cpm(void);
 
 #endif /* __KERNEL__ */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-ppc/8xx_immap.h powerpc.git/include/asm-ppc/8xx_immap.h
--- linux-2.6.24/include/asm-ppc/8xx_immap.h    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-ppc/8xx_immap.h     2008-01-28 20:26:42.000000000 +0100
@@ -123,7 +123,7 @@
 #define OR_G5LA                0x00000400      /* Output #GPL5 on #GPL_A5              */
 #define OR_G5LS                0x00000200      /* Drive #GPL high on falling edge of...*/
 #define OR_BI          0x00000100      /* Burst inhibit                        */
-#define OR_SCY_MSK     0x000000f0      /* Cycle Lenght in Clocks               */
+#define OR_SCY_MSK     0x000000f0      /* Cycle Length in Clocks               */
 #define OR_SCY_0_CLK   0x00000000      /* 0 clock cycles wait states           */
 #define OR_SCY_1_CLK   0x00000010      /* 1 clock cycles wait states           */
 #define OR_SCY_2_CLK   0x00000020      /* 2 clock cycles wait states           */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-ppc/commproc.h powerpc.git/include/asm-ppc/commproc.h
--- linux-2.6.24/include/asm-ppc/commproc.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-ppc/commproc.h      2008-01-28 20:26:42.000000000 +0100
@@ -681,7 +681,7 @@
 #define        CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
 #define        CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
 #define        CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
-#define CICR_IRL_MASK          ((uint)0x0000e000)      /* Core interrrupt */
+#define CICR_IRL_MASK          ((uint)0x0000e000)      /* Core interrupt */
 #define CICR_HP_MASK           ((uint)0x00001f00)      /* Hi-pri int. */
 #define CICR_IEN               ((uint)0x00000080)      /* Int. enable */
 #define CICR_SPS               ((uint)0x00000001)      /* SCC Spread */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-ppc/mmu.h powerpc.git/include/asm-ppc/mmu.h
--- linux-2.6.24/include/asm-ppc/mmu.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-ppc/mmu.h   2008-01-28 20:26:43.000000000 +0100
@@ -383,6 +383,12 @@
 #define BOOKE_PAGESZ_256GB     14
 #define BOOKE_PAGESZ_1TB       15
 
+#ifndef CONFIG_SERIAL_TEXT_DEBUG
+#define PPC44x_EARLY_TLBS      1
+#else
+#define PPC44x_EARLY_TLBS      2
+#endif
+
 /*
  * Freescale Book-E MMU support
  */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-ppc/mpc52xx_psc.h powerpc.git/include/asm-ppc/mpc52xx_psc.h
--- linux-2.6.24/include/asm-ppc/mpc52xx_psc.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-ppc/mpc52xx_psc.h   2008-01-28 20:26:43.000000000 +0100
@@ -159,6 +159,9 @@
        u8              reserved16[3];
        u8              irfdr;          /* PSC + 0x54 */
        u8              reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
        u16             rfnum;          /* PSC + 0x58 */
        u16             reserved18;
        u16             tfnum;          /* PSC + 0x5c */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/asm-ppc/reg_booke.h powerpc.git/include/asm-ppc/reg_booke.h
--- linux-2.6.24/include/asm-ppc/reg_booke.h    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/asm-ppc/reg_booke.h     2008-01-28 20:26:43.000000000 +0100
@@ -207,7 +207,7 @@
 #define        CCR1_TCS        0x00000080 /* Timer Clock Select */
 
 /* Bit definitions for the MCSR. */
-#ifdef CONFIG_440A
+#ifdef CONFIG_4xx
 #define MCSR_MCS       0x80000000 /* Machine Check Summary */
 #define MCSR_IB                0x40000000 /* Instruction PLB Error */
 #define MCSR_DRB       0x20000000 /* Data Read PLB Error */
@@ -283,7 +283,7 @@
 #define ESR_IMCB       0x20000000      /* Instr. Machine Check - Bus error */
 #define ESR_IMCT       0x10000000      /* Instr. Machine Check - Timeout */
 #define ESR_PIL                0x08000000      /* Program Exception - Illegal */
-#define ESR_PPR                0x04000000      /* Program Exception - Priveleged */
+#define ESR_PPR                0x04000000      /* Program Exception - Privileged */
 #define ESR_PTR                0x02000000      /* Program Exception - Trap */
 #define ESR_FP         0x01000000      /* Floating Point Operation */
 #define ESR_DST                0x00800000      /* Storage Exception - Data miss */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/linux/of.h powerpc.git/include/linux/of.h
--- linux-2.6.24/include/linux/of.h     2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/linux/of.h      2008-01-28 20:26:44.000000000 +0100
@@ -17,6 +17,7 @@
  */
 #include <linux/types.h>
 #include <linux/bitops.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/prom.h>
 
@@ -41,11 +42,20 @@
 #define for_each_compatible_node(dn, type, compatible) \
        for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
             dn = of_find_compatible_node(dn, type, compatible))
+extern struct device_node *of_find_matching_node(struct device_node *from,
+       const struct of_device_id *matches);
+#define for_each_matching_node(dn, matches) \
+       for (dn = of_find_matching_node(NULL, matches); dn; \
+            dn = of_find_matching_node(dn, matches))
 extern struct device_node *of_find_node_by_path(const char *path);
 extern struct device_node *of_find_node_by_phandle(phandle handle);
 extern struct device_node *of_get_parent(const struct device_node *node);
 extern struct device_node *of_get_next_child(const struct device_node *node,
                                             struct device_node *prev);
+#define for_each_child_of_node(parent, child) \
+       for (child = of_get_next_child(parent, NULL); child != NULL; \
+            child = of_get_next_child(parent, child))
+
 extern struct property *of_find_property(const struct device_node *np,
                                         const char *name,
                                         int *lenp);
@@ -56,5 +66,7 @@
                                int *lenp);
 extern int of_n_addr_cells(struct device_node *np);
 extern int of_n_size_cells(struct device_node *np);
+extern const struct of_device_id *of_match_node(
+       const struct of_device_id *matches, const struct device_node *node);
 
 #endif /* _LINUX_OF_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/linux/of_device.h powerpc.git/include/linux/of_device.h
--- linux-2.6.24/include/linux/of_device.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/linux/of_device.h       2008-01-28 20:26:44.000000000 +0100
@@ -10,8 +10,6 @@
 
 #define        to_of_device(d) container_of(d, struct of_device, dev)
 
-extern const struct of_device_id *of_match_node(
-       const struct of_device_id *matches, const struct device_node *node);
 extern const struct of_device_id *of_match_device(
        const struct of_device_id *matches, const struct of_device *dev);
 
diff -x .git -x .gitignore -Nur linux-2.6.24/include/linux/pata_platform.h powerpc.git/include/linux/pata_platform.h
--- linux-2.6.24/include/linux/pata_platform.h  2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/linux/pata_platform.h   2008-01-28 20:26:44.000000000 +0100
@@ -15,4 +15,13 @@
        unsigned int irq_flags;
 };
 
+extern int __devinit __pata_platform_probe(struct device *dev,
+                                          struct resource *io_res,
+                                          struct resource *ctl_res,
+                                          struct resource *irq_res,
+                                          unsigned int ioport_shift,
+                                          int __pio_mask);
+
+extern int __devexit __pata_platform_remove(struct device *dev);
+
 #endif /* __LINUX_PATA_PLATFORM_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/linux/phy_fixed.h powerpc.git/include/linux/phy_fixed.h
--- linux-2.6.24/include/linux/phy_fixed.h      2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/linux/phy_fixed.h       2008-01-28 20:26:44.000000000 +0100
@@ -1,38 +1,31 @@
 #ifndef __PHY_FIXED_H
 #define __PHY_FIXED_H
 
-#define MII_REGS_NUM   29
-
-/* max number of virtual phy stuff */
-#define MAX_PHY_AMNT   10
-/*
-    The idea is to emulate normal phy behavior by responding with
-    pre-defined values to mii BMCR read, so that read_status hook could
-    take all the needed info.
-*/
-
 struct fixed_phy_status {
-       u8 link;
-       u16 speed;
-       u8 duplex;
+       int link;
+       int speed;
+       int duplex;
+       int pause;
+       int asym_pause;
 };
 
-/*-----------------------------------------------------------------------------
- *  Private information hoder for mii_bus
- *-----------------------------------------------------------------------------*/
-struct fixed_info {
-       u16 *regs;
-       u8 regs_num;
-       struct fixed_phy_status phy_status;
-       struct phy_device *phydev;      /* pointer to the container */
-       /* link & speed cb */
-       int (*link_update) (struct net_device *, struct fixed_phy_status *);
+#ifdef CONFIG_FIXED_PHY
+extern int fixed_phy_add(unsigned int irq, int phy_id,
+                        struct fixed_phy_status *status);
+#else
+static inline int fixed_phy_add(unsigned int irq, int phy_id,
+                               struct fixed_phy_status *status)
+{
+       return -ENODEV;
+}
+#endif /* CONFIG_FIXED_PHY */
 
-};
-
-
-int fixed_mdio_set_link_update(struct phy_device *,
-       int (*link_update) (struct net_device *, struct fixed_phy_status *));
-struct fixed_info *fixed_mdio_get_phydev (int phydev_ind);
+/*
+ * This function issued only by fixed_phy-aware drivers, no need
+ * protect it with #ifdef
+ */
+extern int fixed_phy_set_link_update(struct phy_device *phydev,
+                       int (*link_update)(struct net_device *,
+                                          struct fixed_phy_status *));
 
 #endif /* __PHY_FIXED_H */
diff -x .git -x .gitignore -Nur linux-2.6.24/include/linux/pmu.h powerpc.git/include/linux/pmu.h
--- linux-2.6.24/include/linux/pmu.h    2008-01-24 23:58:37.000000000 +0100
+++ powerpc.git/include/linux/pmu.h     2008-01-28 20:26:44.000000000 +0100
@@ -159,41 +159,7 @@
 extern int pmu_present(void);
 extern int pmu_get_model(void);
 
-#ifdef CONFIG_PM
-/*
- * Stuff for putting the powerbook to sleep and waking it again.
- *
- */
-#include <linux/list.h>
-
-struct pmu_sleep_notifier
-{
-       void (*notifier_call)(struct pmu_sleep_notifier *self, int when);
-       int priority;
-       struct list_head list;
-};
-
-/* Code values for calling sleep/wakeup handlers
- */
-#define PBOOK_SLEEP_REQUEST    1
-#define PBOOK_SLEEP_NOW                2
-#define PBOOK_WAKE             3
-
-/* priority levels in notifiers */
-#define SLEEP_LEVEL_VIDEO      100     /* Video driver (first wake) */
-#define SLEEP_LEVEL_MEDIABAY   90      /* Media bay driver */
-#define SLEEP_LEVEL_BLOCK      80      /* IDE, SCSI */
-#define SLEEP_LEVEL_NET                70      /* bmac, gmac */
-#define SLEEP_LEVEL_MISC       60      /* Anything else */
-#define SLEEP_LEVEL_USERLAND   55      /* Reserved for apm_emu */
-#define SLEEP_LEVEL_ADB                50      /* ADB (async) */
-#define SLEEP_LEVEL_SOUND      40      /* Sound driver (blocking) */
-
-/* special register notifier functions */
-int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);
-int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);
-
-#endif /* CONFIG_PM */
+extern void pmu_backlight_set_sleep(int sleep);
 
 #define PMU_MAX_BATTERIES      2