target/linux/generic/pending-3.18/002-phy_drivers_backport.patch

   1 --- a/drivers/net/phy/adm6996.c
   2 +++ b/drivers/net/phy/adm6996.c
   3 @@ -289,7 +289,7 @@ static u16
   4  adm6996_read_mii_reg(struct adm6996_priv *priv, enum admreg reg)
   5  {
   6         struct phy_device *phydev = priv->priv;
   7 -       struct mii_bus *bus = phydev->mdio.bus;
   8 +       struct mii_bus *bus = phydev->bus;
   9
  10         return bus->read(bus, PHYADDR(reg));
  11  }
  12 @@ -298,7 +298,7 @@ static void
  13  adm6996_write_mii_reg(struct adm6996_priv *priv, enum admreg reg, u16 val)
  14  {
  15         struct phy_device *phydev = priv->priv;
  16 -       struct mii_bus *bus = phydev->mdio.bus;
  17 +       struct mii_bus *bus = phydev->bus;
  18
  19         bus->write(bus, PHYADDR(reg), val);
  20  }
  21 @@ -1050,13 +1050,13 @@ static int adm6996_config_init(struct ph
  22         pdev->supported = ADVERTISED_100baseT_Full;
  23         pdev->advertising = ADVERTISED_100baseT_Full;
  24
  25 -       if (pdev->mdio.addr != 0) {
  26 +       if (pdev->addr != 0) {
  27                 pr_info ("%s: PHY overlaps ADM6996, providing fixed PHY 0x%x.\n"
  28 -                               , pdev->attached_dev->name, pdev->mdio.addr);
  29 +                               , pdev->attached_dev->name, pdev->addr);
  30                 return 0;
  31         }
  32
  33 -       priv = devm_kzalloc(&pdev->mdio.dev, sizeof(struct adm6996_priv), GFP_KERNEL);
  34 +       priv = devm_kzalloc(&pdev->dev, sizeof(struct adm6996_priv), GFP_KERNEL);
  35         if (!priv)
  36                 return -ENOMEM;
  37
  38 @@ -1076,7 +1076,7 @@ static int adm6996_config_init(struct ph
  39  }
  40
  41  /*
  42 - * Warning: phydev->priv is NULL if phydev->mdio.addr != 0
  43 + * Warning: phydev->priv is NULL if phydev->addr != 0
  44   */
  45  static int adm6996_read_status(struct phy_device *phydev)
  46  {
  47 @@ -1092,7 +1092,7 @@ static int adm6996_read_status(struct ph
  48  }
  49
  50  /*
  51 - * Warning: phydev->priv is NULL if phydev->mdio.addr != 0
  52 + * Warning: phydev->priv is NULL if phydev->addr != 0
  53   */
  54  static int adm6996_config_aneg(struct phy_device *phydev)
  55  {
  56 @@ -1101,11 +1101,11 @@ static int adm6996_config_aneg(struct ph
  57
  58  static int adm6996_fixup(struct phy_device *dev)
  59  {
  60 -       struct mii_bus *bus = dev->mdio.bus;
  61 +       struct mii_bus *bus = dev->bus;
  62         u16 reg;
  63
  64         /* Our custom registers are at PHY addresses 0-10. Claim those. */
  65 -       if (dev->mdio.addr > 10)
  66 +       if (dev->addr > 10)
  67                 return 0;
  68
  69         /* look for the switch on the bus */
  70 @@ -1152,6 +1152,7 @@ static struct phy_driver adm6996_phy_dri
  71         .config_aneg    = &adm6996_config_aneg,
  72         .read_status    = &adm6996_read_status,
  73         .soft_reset     = adm6996_soft_reset,
  74 +       .driver         = { .owner = THIS_MODULE,},
  75  };
  76
  77  static int adm6996_gpio_probe(struct platform_device *pdev)
  78 @@ -1220,7 +1221,7 @@ static int __init adm6996_init(void)
  79         int err;
  80
  81         phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup);
  82 -       err = phy_driver_register(&adm6996_phy_driver, THIS_MODULE);
  83 +       err = phy_driver_register(&adm6996_phy_driver);
  84         if (err)
  85                 return err;
  86
  87 --- a/drivers/net/phy/ar8216.c
  88 +++ b/drivers/net/phy/ar8216.c
  89 @@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device
  90         if (ret & BMCR_ANENABLE)
  91                 return 0;
  92
  93 -       dev_info(&phydev->mdio.dev, "ANEG disabled, re-enabling ...\n");
  94 +       dev_info(&phydev->dev, "ANEG disabled, re-enabling ...\n");
  95         ret |= BMCR_ANENABLE | BMCR_ANRESTART;
  96         return phy_write(phydev, MII_BMCR, ret);
  97  }
  98 @@ -2007,7 +2007,7 @@ ar8xxx_phy_config_init(struct phy_device
  99
 100         priv->phy = phydev;
 101
 102 -       if (phydev->mdio.addr != 0) {
 103 +       if (phydev->addr != 0) {
 104                 if (chip_is_ar8316(priv)) {
 105                         /* switch device has been initialized, reinit */
 106                         priv->dev.ports = (AR8216_NUM_PORTS - 1);
 107 @@ -2055,7 +2055,7 @@ ar8xxx_check_link_states(struct ar8xxx_p
 108                 /* flush ARL entries for this port if it went down*/
 109                 if (!link_new)
 110                         priv->chip->atu_flush_port(priv, i);
 111 -               dev_info(&priv->phy->mdio.dev, "Port %d is %s\n",
 112 +               dev_info(&priv->phy->dev, "Port %d is %s\n",
 113                          i, link_new ? "up" : "down");
 114         }
 115
 116 @@ -2074,10 +2074,10 @@ ar8xxx_phy_read_status(struct phy_device
 117         if (phydev->state == PHY_CHANGELINK)
 118                 ar8xxx_check_link_states(priv);
 119
 120 -       if (phydev->mdio.addr != 0)
 121 +       if (phydev->addr != 0)
 122                 return genphy_read_status(phydev);
 123
 124 -       ar8216_read_port_link(priv, phydev->mdio.addr, &link);
 125 +       ar8216_read_port_link(priv, phydev->addr, &link);
 126         phydev->link = !!link.link;
 127         if (!phydev->link)
 128                 return 0;
 129 @@ -2107,7 +2107,7 @@ ar8xxx_phy_read_status(struct phy_device
 130  static int
 131  ar8xxx_phy_config_aneg(struct phy_device *phydev)
 132  {
 133 -       if (phydev->mdio.addr == 0)
 134 +       if (phydev->addr == 0)
 135                 return 0;
 136
 137         return genphy_config_aneg(phydev);
 138 @@ -2162,15 +2162,15 @@ ar8xxx_phy_probe(struct phy_device *phyd
 139         int ret;
 140
 141         /* skip PHYs at unused adresses */
 142 -       if (phydev->mdio.addr != 0 && phydev->mdio.addr != 4)
 143 +       if (phydev->addr != 0 && phydev->addr != 4)
 144                 return -ENODEV;
 145
 146 -       if (!ar8xxx_is_possible(phydev->mdio.bus))
 147 +       if (!ar8xxx_is_possible(phydev->bus))
 148                 return -ENODEV;
 149
 150         mutex_lock(&ar8xxx_dev_list_lock);
 151         list_for_each_entry(priv, &ar8xxx_dev_list, list)
 152 -               if (priv->mii_bus == phydev->mdio.bus)
 153 +               if (priv->mii_bus == phydev->bus)
 154                         goto found;
 155
 156         priv = ar8xxx_create();
 157 @@ -2179,7 +2179,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
 158                 goto unlock;
 159         }
 160
 161 -       priv->mii_bus = phydev->mdio.bus;
 162 +       priv->mii_bus = phydev->bus;
 163
 164         ret = ar8xxx_probe_switch(priv);
 165         if (ret)
 166 @@ -2200,7 +2200,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
 167  found:
 168         priv->use_count++;
 169
 170 -       if (phydev->mdio.addr == 0) {
 171 +       if (phydev->addr == 0) {
 172                 if (ar8xxx_has_gige(priv)) {
 173                         phydev->supported = SUPPORTED_1000baseT_Full;
 174                         phydev->advertising = ADVERTISED_1000baseT_Full;
 175 @@ -2288,21 +2288,33 @@ ar8xxx_phy_soft_reset(struct phy_device
 176         return 0;
 177  }
 178
 179 -static struct phy_driver ar8xxx_phy_driver[] = {
 180 -       {
 181 -               .phy_id         = 0x004d0000,
 182 -               .name           = "Atheros AR8216/AR8236/AR8316",
 183 -               .phy_id_mask    = 0xffff0000,
 184 -               .features       = PHY_BASIC_FEATURES,
 185 -               .probe          = ar8xxx_phy_probe,
 186 -               .remove         = ar8xxx_phy_remove,
 187 -               .detach         = ar8xxx_phy_detach,
 188 -               .config_init    = ar8xxx_phy_config_init,
 189 -               .config_aneg    = ar8xxx_phy_config_aneg,
 190 -               .read_status    = ar8xxx_phy_read_status,
 191 -               .soft_reset     = ar8xxx_phy_soft_reset,
 192 -       }
 193 +static struct phy_driver ar8xxx_phy_driver = {
 194 +       .phy_id         = 0x004d0000,
 195 +       .name           = "Atheros AR8216/AR8236/AR8316",
 196 +       .phy_id_mask    = 0xffff0000,
 197 +       .features       = PHY_BASIC_FEATURES,
 198 +       .probe          = ar8xxx_phy_probe,
 199 +       .remove         = ar8xxx_phy_remove,
 200 +       .detach         = ar8xxx_phy_detach,
 201 +       .config_init    = ar8xxx_phy_config_init,
 202 +       .config_aneg    = ar8xxx_phy_config_aneg,
 203 +       .read_status    = ar8xxx_phy_read_status,
 204 +       .soft_reset     = ar8xxx_phy_soft_reset,
 205 +       .driver         = { .owner = THIS_MODULE },
 206  };
 207
 208 -module_phy_driver(ar8xxx_phy_driver);
 209 +int __init
 210 +ar8xxx_init(void)
 211 +{
 212 +       return phy_driver_register(&ar8xxx_phy_driver);
 213 +}
 214 +
 215 +void __exit
 216 +ar8xxx_exit(void)
 217 +{
 218 +       phy_driver_unregister(&ar8xxx_phy_driver);
 219 +}
 220 +
 221 +module_init(ar8xxx_init);
 222 +module_exit(ar8xxx_exit);
 223  MODULE_LICENSE("GPL");
 224 --- a/drivers/net/phy/ar8327.c
 225 +++ b/drivers/net/phy/ar8327.c
 226 @@ -627,11 +627,11 @@ ar8327_hw_init(struct ar8xxx_priv *priv)
 227         if (!priv->chip_data)
 228                 return -ENOMEM;
 229
 230 -       if (priv->phy->mdio.dev.of_node)
 231 -               ret = ar8327_hw_config_of(priv, priv->phy->mdio.dev.of_node);
 232 +       if (priv->phy->dev.of_node)
 233 +               ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
 234         else
 235                 ret = ar8327_hw_config_pdata(priv,
 236 -                                            priv->phy->mdio.dev.platform_data);
 237 +                                            priv->phy->dev.platform_data);
 238
 239         if (ret)
 240                 return ret;
 241 --- a/drivers/net/phy/ip17xx.c
 242 +++ b/drivers/net/phy/ip17xx.c
 243 @@ -1273,7 +1273,7 @@ static int ip17xx_probe(struct phy_devic
 244         int err;
 245
 246         /* We only attach to PHY 0, but use all available PHYs */
 247 -       if (pdev->mdio.addr != 0)
 248 +       if (pdev->addr != 0)
 249                 return -ENODEV;
 250
 251         state = kzalloc(sizeof(*state), GFP_KERNEL);
 252 @@ -1283,7 +1283,7 @@ static int ip17xx_probe(struct phy_devic
 253         dev = &state->dev;
 254
 255         pdev->priv = state;
 256 -       state->mii_bus = pdev->mdio.bus;
 257 +       state->mii_bus = pdev->bus;
 258
 259         err = get_model(state);
 260         if (err < 0)
 261 @@ -1295,7 +1295,7 @@ static int ip17xx_probe(struct phy_devic
 262         dev->name = state->regs->NAME;
 263         dev->ops = &ip17xx_ops;
 264
 265 -       pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->mdio.dev));
 266 +       pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->dev));
 267         return 0;
 268
 269  error:
 270 @@ -1353,25 +1353,58 @@ static int ip17xx_read_status(struct phy
 271         return 0;
 272  }
 273
 274 -static struct phy_driver ip17xx_driver[] = {
 275 -       {
 276 -               .name           = "IC+ IP17xx",
 277 -               .phy_id         = 0x02430c00,
 278 -               .phy_id_mask    = 0x0ffffc00,
 279 -               .features       = PHY_BASIC_FEATURES,
 280 -               .probe          = ip17xx_probe,
 281 -               .remove         = ip17xx_remove,
 282 -               .config_init    = ip17xx_config_init,
 283 -               .config_aneg    = ip17xx_config_aneg,
 284 -               .aneg_done      = ip17xx_aneg_done,
 285 -               .update_link    = ip17xx_update_link,
 286 -               .read_status    = ip17xx_read_status,
 287 -       }
 288 +static struct phy_driver ip17xx_driver = {
 289 +       .name           = "IC+ IP17xx",
 290 +       .phy_id         = 0x02430c00,
 291 +       .phy_id_mask    = 0x0ffffc00,
 292 +       .features       = PHY_BASIC_FEATURES,
 293 +       .probe          = ip17xx_probe,
 294 +       .remove         = ip17xx_remove,
 295 +       .config_init    = ip17xx_config_init,
 296 +       .config_aneg    = ip17xx_config_aneg,
 297 +       .aneg_done      = ip17xx_aneg_done,
 298 +       .update_link    = ip17xx_update_link,
 299 +       .read_status    = ip17xx_read_status,
 300 +       .driver         = { .owner = THIS_MODULE },
 301  };
 302
 303 -module_phy_driver(ip17xx_driver);
 304 +static struct phy_driver ip175a_driver = {
 305 +       .name           = "IC+ IP175A",
 306 +       .phy_id         = 0x02430c50,
 307 +       .phy_id_mask    = 0x0ffffff0,
 308 +       .features       = PHY_BASIC_FEATURES,
 309 +       .probe          = ip17xx_probe,
 310 +       .remove         = ip17xx_remove,
 311 +       .config_init    = ip17xx_config_init,
 312 +       .config_aneg    = ip17xx_config_aneg,
 313 +       .aneg_done      = ip17xx_aneg_done,
 314 +       .update_link    = ip17xx_update_link,
 315 +       .read_status    = ip17xx_read_status,
 316 +       .driver         = { .owner = THIS_MODULE },
 317 +};
 318 +
 319 +
 320 +int __init ip17xx_init(void)
 321 +{
 322 +       int ret;
 323 +
 324 +       ret = phy_driver_register(&ip175a_driver);
 325 +       if (ret < 0)
 326 +               return ret;
 327 +
 328 +       return phy_driver_register(&ip17xx_driver);
 329 +}
 330 +
 331 +void __exit ip17xx_exit(void)
 332 +{
 333 +       phy_driver_unregister(&ip17xx_driver);
 334 +       phy_driver_unregister(&ip175a_driver);
 335 +}
 336
 337  MODULE_AUTHOR("Patrick Horn <patrick.horn@gmail.com>");
 338  MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
 339  MODULE_AUTHOR("Martin Mares <mj@ucw.cz>");
 340  MODULE_LICENSE("GPL");
 341 +
 342 +module_init(ip17xx_init);
 343 +module_exit(ip17xx_exit);
 344 --- a/drivers/net/phy/mvswitch.c
 345 +++ b/drivers/net/phy/mvswitch.c
 346 @@ -50,17 +50,13 @@ struct mvswitch_priv {
 347  static inline u16
 348  r16(struct phy_device *phydev, int addr, int reg)
 349  {
 350 -       struct mii_bus *bus = phydev->mdio.bus;
 351 -
 352 -       return bus->read(bus, addr, reg);
 353 +       return phydev->bus->read(phydev->bus, addr, reg);
 354  }
 355
 356  static inline void
 357  w16(struct phy_device *phydev, int addr, int reg, u16 val)
 358  {
 359 -       struct mii_bus *bus = phydev->mdio.bus;
 360 -
 361 -       bus->write(bus, addr, reg, val);
 362 +       phydev->bus->write(phydev->bus, addr, reg, val);
 363  }
 364
 365
 366 @@ -398,13 +394,12 @@ mvswitch_probe(struct phy_device *pdev)
 367  static int
 368  mvswitch_fixup(struct phy_device *dev)
 369  {
 370 -       struct mii_bus *bus = dev->mdio.bus;
 371         u16 reg;
 372
 373 -       if (dev->mdio.addr != 0x10)
 374 +       if (dev->addr != 0x10)
 375                 return 0;
 376
 377 -       reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
 378 +       reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
 379         if (reg != MV_IDENT_VALUE)
 380                 return 0;
 381
 382 @@ -425,13 +420,14 @@ static struct phy_driver mvswitch_driver
 383         .config_aneg    = &mvswitch_config_aneg,
 384         .aneg_done      = &mvswitch_aneg_done,
 385         .read_status    = &mvswitch_read_status,
 386 +       .driver         = { .owner = THIS_MODULE,},
 387  };
 388
 389  static int __init
 390  mvswitch_init(void)
 391  {
 392         phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
 393 -       return phy_driver_register(&mvswitch_driver, THIS_MODULE);
 394 +       return phy_driver_register(&mvswitch_driver);
 395  }
 396
 397  static void __exit
 398 --- a/drivers/net/phy/psb6970.c
 399 +++ b/drivers/net/phy/psb6970.c
 400 @@ -70,16 +70,12 @@ struct psb6970_priv {
 401
 402  static u16 psb6970_mii_read(struct phy_device *phydev, int reg)
 403  {
 404 -       struct mii_bus *bus = phydev->mdio.bus;
 405 -
 406 -       return bus->read(bus, PHYADDR(reg));
 407 +       return phydev->bus->read(phydev->bus, PHYADDR(reg));
 408  }
 409
 410  static void psb6970_mii_write(struct phy_device *phydev, int reg, u16 val)
 411  {
 412 -       struct mii_bus *bus = phydev->mdio.bus;
 413 -
 414 -       bus->write(bus, PHYADDR(reg), val);
 415 +       phydev->bus->write(phydev->bus, PHYADDR(reg), val);
 416  }
 417
 418  static int
 419 @@ -316,11 +312,11 @@ static int psb6970_config_init(struct ph
 420
 421         priv->phy = pdev;
 422
 423 -       if (pdev->mdio.addr == 0)
 424 +       if (pdev->addr == 0)
 425                 printk(KERN_INFO "%s: psb6970 switch driver attached.\n",
 426                        pdev->attached_dev->name);
 427
 428 -       if (pdev->mdio.addr != 0) {
 429 +       if (pdev->addr != 0) {
 430                 kfree(priv);
 431                 return 0;
 432         }
 433 @@ -388,14 +384,14 @@ static void psb6970_remove(struct phy_de
 434         if (!priv)
 435                 return;
 436
 437 -       if (pdev->mdio.addr == 0)
 438 +       if (pdev->addr == 0)
 439                 unregister_switch(&priv->dev);
 440         kfree(priv);
 441  }
 442
 443  static int psb6970_fixup(struct phy_device *dev)
 444  {
 445 -       struct mii_bus *bus = dev->mdio.bus;
 446 +       struct mii_bus *bus = dev->bus;
 447         u16 reg;
 448
 449         /* look for the switch on the bus */
 450 @@ -419,12 +415,13 @@ static struct phy_driver psb6970_driver
 451         .config_init = &psb6970_config_init,
 452         .config_aneg = &psb6970_config_aneg,
 453         .read_status = &psb6970_read_status,
 454 +       .driver = {.owner = THIS_MODULE},
 455  };
 456
 457  int __init psb6970_init(void)
 458  {
 459         phy_register_fixup_for_id(PHY_ANY_ID, psb6970_fixup);
 460 -       return phy_driver_register(&psb6970_driver, THIS_MODULE);
 461 +       return phy_driver_register(&psb6970_driver);
 462  }
 463
 464  module_init(psb6970_init);
 465 --- a/drivers/net/phy/rtl8306.c
 466 +++ b/drivers/net/phy/rtl8306.c
 467 @@ -877,7 +877,7 @@ rtl8306_config_init(struct phy_device *p
 468         int err;
 469
 470         /* Only init the switch for the primary PHY */
 471 -       if (pdev->mdio.addr != 0)
 472 +       if (pdev->addr != 0)
 473                 return 0;
 474
 475         val.value.i = 1;
 476 @@ -887,7 +887,7 @@ rtl8306_config_init(struct phy_device *p
 477         priv->dev.ops = &rtl8306_ops;
 478         priv->do_cpu = 0;
 479         priv->page = -1;
 480 -       priv->bus = pdev->mdio.bus;
 481 +       priv->bus = pdev->bus;
 482
 483         chipid = rtl_get(dev, RTL_REG_CHIPID);
 484         chipver = rtl_get(dev, RTL_REG_CHIPVER);
 485 @@ -933,13 +933,13 @@ rtl8306_fixup(struct phy_device *pdev)
 486         u16 chipid;
 487
 488         /* Attach to primary LAN port and WAN port */
 489 -       if (pdev->mdio.addr != 0 && pdev->mdio.addr != 4)
 490 +       if (pdev->addr != 0 && pdev->addr != 4)
 491                 return 0;
 492
 493         memset(&priv, 0, sizeof(priv));
 494         priv.fixup = true;
 495         priv.page = -1;
 496 -       priv.bus = pdev->mdio.bus;
 497 +       priv.bus = pdev->bus;
 498         chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
 499         if (chipid == 0x5988)
 500                 pdev->phy_id = RTL8306_MAGIC;
 501 @@ -957,14 +957,14 @@ rtl8306_probe(struct phy_device *pdev)
 502                  * share one rtl_priv instance between virtual phy
 503                  * devices on the same bus
 504                  */
 505 -               if (priv->bus == pdev->mdio.bus)
 506 +               if (priv->bus == pdev->bus)
 507                         goto found;
 508         }
 509         priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
 510         if (!priv)
 511                 return -ENOMEM;
 512
 513 -       priv->bus = pdev->mdio.bus;
 514 +       priv->bus = pdev->bus;
 515
 516  found:
 517         pdev->priv = priv;
 518 @@ -985,7 +985,7 @@ rtl8306_config_aneg(struct phy_device *p
 519         struct rtl_priv *priv = pdev->priv;
 520
 521         /* Only for WAN */
 522 -       if (pdev->mdio.addr == 0)
 523 +       if (pdev->addr == 0)
 524                 return 0;
 525
 526         /* Restart autonegotiation */
 527 @@ -1001,7 +1001,7 @@ rtl8306_read_status(struct phy_device *p
 528         struct rtl_priv *priv = pdev->priv;
 529         struct switch_dev *dev = &priv->dev;
 530
 531 -       if (pdev->mdio.addr == 4) {
 532 +       if (pdev->addr == 4) {
 533                 /* WAN */
 534                 pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
 535                 pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
 536 @@ -1044,6 +1044,7 @@ static struct phy_driver rtl8306_driver
 537         .config_init    = &rtl8306_config_init,
 538         .config_aneg    = &rtl8306_config_aneg,
 539         .read_status    = &rtl8306_read_status,
 540 +       .driver         = { .owner = THIS_MODULE,},
 541  };
 542
 543
 544 @@ -1051,7 +1052,7 @@ static int __init
 545  rtl_init(void)
 546  {
 547         phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
 548 -       return phy_driver_register(&rtl8306_driver, THIS_MODULE);
 549 +       return phy_driver_register(&rtl8306_driver);
 550  }
 551
 552  static void __exit