target/linux/generic/patches-4.4/222-arm_zimage_none.patch

   1 ARM: implement "uncompressed zImage"
   2
   3 Based on RFC patch by Uwe Kleine-König
   4 http://www.spinics.net/lists/arm-kernel/msg230153.html
   5
   6 Signed-off-by: Felix Fietkau <nbd@nbd.name>
   7 ---
   8 --- a/arch/arm/boot/compressed/Makefile
   9 +++ b/arch/arm/boot/compressed/Makefile
  10 @@ -71,6 +71,7 @@ suffix_$(CONFIG_KERNEL_LZO)  = lzo
  11  suffix_$(CONFIG_KERNEL_LZMA) = lzma
  12  suffix_$(CONFIG_KERNEL_XZ)   = xzkern
  13  suffix_$(CONFIG_KERNEL_LZ4)  = lz4
  14 +suffix_$(CONFIG_KERNEL_CAT)  = cat
  15
  16  # Borrowed libfdt files for the ATAG compatibility mode
  17
  18 @@ -95,7 +96,7 @@ targets       := vmlinux vmlinux.lds \
  19                  bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
  20
  21  # Make sure files are removed during clean
  22 -extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
  23 +extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 piggy.cat \
  24                  lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
  25                  hyp-stub.S
  26
  27 --- a/arch/arm/boot/compressed/decompress.c
  28 +++ b/arch/arm/boot/compressed/decompress.c
  29 @@ -55,6 +55,10 @@ extern char * strstr(const char * s1, co
  30  #include "../../../../lib/decompress_unlz4.c"
  31  #endif
  32
  33 +#ifdef CONFIG_KERNEL_CAT
  34 +#include "../../../../lib/decompress_uncat.c"
  35 +#endif
  36 +
  37  int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
  38  {
  39         return __decompress(input, len, NULL, NULL, output, 0, NULL, error);
  40 --- /dev/null
  41 +++ b/arch/arm/boot/compressed/piggy.cat.S
  42 @@ -0,0 +1,6 @@
  43 +       .section .piggydata,#alloc
  44 +       .globl  input_data
  45 +input_data:
  46 +       .incbin "arch/arm/boot/compressed/piggy.cat"
  47 +       .globl  input_data_end
  48 +input_data_end:
  49 --- a/init/Kconfig
  50 +++ b/init/Kconfig
  51 @@ -115,6 +115,9 @@ config HAVE_KERNEL_LZO
  52  config HAVE_KERNEL_LZ4
  53         bool
  54
  55 +config HAVE_KERNEL_CAT
  56 +       bool
  57 +
  58  choice
  59         prompt "Kernel compression mode"
  60         default KERNEL_GZIP
  61 @@ -181,9 +184,10 @@ config KERNEL_LZO
  62         bool "LZO"
  63         depends on HAVE_KERNEL_LZO
  64         help
  65 -         Its compression ratio is the poorest among the choices. The kernel
  66 -         size is about 10% bigger than gzip; however its speed
  67 -         (both compression and decompression) is the fastest.
  68 +         Its compression ratio is the poorest among the choices (apart from
  69 +         uncompressed below). The kernel size is about 10% bigger than gzip;
  70 +         however its speed (both compression and decompression) is the
  71 +         fastest.
  72
  73  config KERNEL_LZ4
  74         bool "LZ4"
  75 @@ -197,6 +201,12 @@ config KERNEL_LZ4
  76           is about 8% bigger than LZO. But the decompression speed is
  77           faster than LZO.
  78
  79 +config KERNEL_CAT
  80 +       bool "uncompressed"
  81 +       depends on HAVE_KERNEL_CAT
  82 +       help
  83 +         Don't use compression at all.
  84 +
  85  endchoice
  86
  87  config DEFAULT_HOSTNAME
  88 --- /dev/null
  89 +++ b/lib/decompress_uncat.c
  90 @@ -0,0 +1,17 @@
  91 +#include <linux/types.h>
  92 +#include <linux/compiler.h>
  93 +
  94 +#ifdef STATIC
  95 +
  96 +STATIC int __decompress(unsigned char *buf, long in_len,
  97 +                       long (*fill)(void*, unsigned long),
  98 +                       long (*flush)(void*, unsigned long),
  99 +                       unsigned char *output, long out_len,
 100 +                       long *posp,
 101 +                       void (*error)(char *x))
 102 +{
 103 +       memmove(output, buf, in_len);
 104 +       return 0;
 105 +}
 106 +
 107 +#endif
 108 --- a/scripts/Makefile.lib
 109 +++ b/scripts/Makefile.lib
 110 @@ -337,6 +337,13 @@ cmd_lz4 = (cat $(filter-out FORCE,$^) |
 111         lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 112         (rm -f $@ ; false)
 113
 114 +# uncompressed
 115 +# ---------------------------------------------------------------------------
 116 +quiet_cmd_cat = CAT     $@
 117 +cmd_cat = (cat $(filter-out FORCE,$^) \
 118 +       && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 119 +       (rm -f $@ ; false)
 120 +
 121  # U-Boot mkimage
 122  # ---------------------------------------------------------------------------
 123
 124 --- a/arch/arm/Kconfig
 125 +++ b/arch/arm/Kconfig
 126 @@ -59,6 +59,7 @@ config ARM
 127         select HAVE_KERNEL_LZMA
 128         select HAVE_KERNEL_LZO
 129         select HAVE_KERNEL_XZ
 130 +       select HAVE_KERNEL_CAT
 131         select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 132         select HAVE_KRETPROBES if (HAVE_KPROBES)
 133         select HAVE_MEMBLOCK