1 From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
2 From: Felix Fietkau <nbd@nbd.name>
3 Date: Fri, 7 Jul 2017 17:24:23 +0200
4 Subject: net: swconfig: adds openwrt switch layer
6 Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 drivers/net/phy/Kconfig | 83 +++++++++++++++++++++++++++++++++++++++++++++++
9 drivers/net/phy/Makefile | 15 +++++++++
10 include/uapi/linux/Kbuild | 1 +
11 3 files changed, 99 insertions(+)
13 --- a/drivers/net/phy/Kconfig
14 +++ b/drivers/net/phy/Kconfig
15 @@ -198,6 +198,89 @@ config LED_TRIGGER_PHY
16 <Speed in megabits>Mbps or <Speed in gigabits>Gbps
19 +comment "Switch configuration API + drivers"
22 + tristate "Switch configuration API"
24 + Switch configuration API using netlink. This allows
25 + you to configure the VLAN features of certain switches.
28 + bool "Switch LED trigger support"
29 + depends on (SWCONFIG && LEDS_TRIGGERS)
32 + tristate "Driver for ADM6996 switches"
35 + Currently supports the ADM6996FC and ADM6996M switches.
36 + Support for FC is very limited.
39 + tristate "Driver for Atheros AR8216 switches"
40 + select ETHERNET_PACKET_MANGLE
43 +config AR8216_PHY_LEDS
44 + bool "Atheros AR8216 switch LED support"
45 + depends on (AR8216_PHY && LEDS_CLASS)
47 +source "drivers/net/phy/b53/Kconfig"
50 + tristate "Driver for IC+ IP17xx switches"
54 + tristate "Driver for Marvell 88E6060 switches"
55 + select ETHERNET_PACKET_MANGLE
58 + tristate "Driver for Marvell 88E6171/6172 switches"
62 + tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
64 + select ETHERNET_PACKET_MANGLE
67 + tristate "Driver for Realtek RTL8306S switches"
71 + tristate "Driver for the RTL8366 SMI interface"
74 + This module implements the SMI interface protocol which is used
75 + by some RTL8366 ethernet switch devices via the generic GPIO API.
79 +config RTL8366_SMI_DEBUG_FS
80 + bool "RTL8366 SMI interface debugfs support"
85 + tristate "Driver for the Realtek RTL8366S switch"
89 + tristate "Driver for the Realtek RTL8366RB switch"
93 + tristate "Driver for the Realtek RTL8367R/M switches"
97 + tristate "Driver fot the Realtek RTL8367R-VB switch"
102 comment "MII PHY device drivers"
105 --- a/drivers/net/phy/Makefile
106 +++ b/drivers/net/phy/Makefile
107 @@ -22,6 +22,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_
108 obj-$(CONFIG_PHYLINK) += phylink.o
109 obj-$(CONFIG_PHYLIB) += libphy.o
111 +obj-$(CONFIG_SWCONFIG) += swconfig.o
112 +obj-$(CONFIG_ADM6996_PHY) += adm6996.o
113 +obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
114 +obj-$(CONFIG_SWCONFIG_B53) += b53/
115 +obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
116 +obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
117 +obj-$(CONFIG_MVSW61XX_PHY) += mvsw61xx.o
118 +obj-$(CONFIG_PSB6970_PHY) += psb6970.o
119 +obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
120 +obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
121 +obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
122 +obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
123 +obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
124 +obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
126 obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
127 obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
128 obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
129 --- a/include/linux/platform_data/b53.h
130 +++ b/include/linux/platform_data/b53.h
131 @@ -25,6 +25,9 @@ struct b53_platform_data {
135 + /* allow to specify an ethX alias */
138 /* only used by MMAP'd driver */
139 unsigned big_endian:1;