target/linux/gemini/patches-4.4/130-usb-ehci-add-fot2g-driver.patch

   1 --- a/drivers/usb/host/ehci-hcd.c
   2 +++ b/drivers/usb/host/ehci-hcd.c
   3 @@ -352,11 +352,13 @@ static void ehci_silence_controller(stru
   4         ehci->rh_state = EHCI_RH_HALTED;
   5         ehci_turn_off_all_ports(ehci);
   6
   7 +#ifndef CONFIG_ARCH_GEMINI
   8         /* make BIOS/etc use companion controller during reboot */
   9         ehci_writel(ehci, 0, &ehci->regs->configured_flag);
  10
  11         /* unblock posted writes */
  12         ehci_readl(ehci, &ehci->regs->configured_flag);
  13 +#endif
  14         spin_unlock_irq(&ehci->lock);
  15  }
  16
  17 @@ -608,7 +610,9 @@ static int ehci_run (struct usb_hcd *hcd
  18         // Philips, Intel, and maybe others need CMD_RUN before the
  19         // root hub will detect new devices (why?); NEC doesn't
  20         ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
  21 +#ifndef CONFIG_ARCH_GEMINI
  22         ehci->command |= CMD_RUN;
  23 +#endif
  24         ehci_writel(ehci, ehci->command, &ehci->regs->command);
  25         dbg_cmd (ehci, "init", ehci->command);
  26
  27 @@ -628,9 +632,11 @@ static int ehci_run (struct usb_hcd *hcd
  28          */
  29         down_write(&ehci_cf_port_reset_rwsem);
  30         ehci->rh_state = EHCI_RH_RUNNING;
  31 +#ifndef CONFIG_ARCH_GEMINI
  32         ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
  33         ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
  34         msleep(5);
  35 +#endif
  36         up_write(&ehci_cf_port_reset_rwsem);
  37         ehci->last_periodic_enable = ktime_get_real();
  38
  39 @@ -768,9 +774,10 @@ static irqreturn_t ehci_irq (struct usb_
  40                 pcd_status = status;
  41
  42                 /* resume root hub? */
  43 +#ifndef CONFIG_ARCH_GEMINI
  44                 if (ehci->rh_state == EHCI_RH_SUSPENDED)
  45                         usb_hcd_resume_root_hub(hcd);
  46 -
  47 +#endif
  48                 /* get per-port change detect bits */
  49                 if (ehci->has_ppcd)
  50                         ppcd = status >> 16;
  51 @@ -1296,6 +1303,11 @@ MODULE_LICENSE ("GPL");
  52  #define        PLATFORM_DRIVER         ehci_hcd_sead3_driver
  53  #endif
  54
  55 +#ifdef CONFIG_ARCH_GEMINI
  56 +#include "ehci-fotg2.c"
  57 +#define PLATFORM_DRIVER                ehci_fotg2_driver
  58 +#endif
  59 +
  60  static int __init ehci_hcd_init(void)
  61  {
  62         int retval = 0;
  63 --- a/drivers/usb/host/ehci-timer.c
  64 +++ b/drivers/usb/host/ehci-timer.c
  65 @@ -208,7 +208,9 @@ static void ehci_handle_controller_death
  66
  67         /* Clean up the mess */
  68         ehci->rh_state = EHCI_RH_HALTED;
  69 +#ifndef CONFIG_ARCH_GEMINI
  70         ehci_writel(ehci, 0, &ehci->regs->configured_flag);
  71 +#endif
  72         ehci_writel(ehci, 0, &ehci->regs->intr_enable);
  73         ehci_work(ehci);
  74         end_unlink_async(ehci);
  75 --- a/drivers/usb/host/ehci.h
  76 +++ b/drivers/usb/host/ehci.h
  77 @@ -657,7 +657,12 @@ static inline unsigned int
  78  ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
  79  {
  80         if (ehci_is_TDI(ehci)) {
  81 -               switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
  82 +#ifdef CONFIG_ARCH_GEMINI
  83 +               portsc = readl(ehci_to_hcd(ehci)->regs + 0x80);
  84 +               switch ((portsc>>22)&3) {
  85 +#else
  86 +               switch ((portsc>>26)&3) {
  87 +#endif
  88                 case 0:
  89                         return 0;
  90                 case 1:
  91 --- a/drivers/usb/host/ehci-hub.c
  92 +++ b/drivers/usb/host/ehci-hub.c
  93 @@ -1076,6 +1076,11 @@ int ehci_hub_control(
  94                         /* see what we found out */
  95                         temp = check_reset_complete (ehci, wIndex, status_reg,
  96                                         ehci_readl(ehci, status_reg));
  97 +#ifdef CONFIG_ARCH_GEMINI
  98 +                       /* restart schedule */
  99 +                       ehci->command |= CMD_RUN;
 100 +                       ehci_writel(ehci, ehci->command, &ehci->regs->command);
 101 +#endif
 102                 }
 103
 104                 /* transfer dedicated ports to the companion hc */
 105 --- a/include/linux/usb/ehci_def.h
 106 +++ b/include/linux/usb/ehci_def.h
 107 @@ -112,8 +112,13 @@ struct ehci_regs {
 108         u32             frame_list;     /* points to periodic list */
 109         /* ASYNCLISTADDR: offset 0x18 */
 110         u32             async_next;     /* address of next async queue head */
 111 -
 112 +#ifndef CONFIG_ARCH_GEMINI
 113         u32             reserved1[2];
 114 +#else
 115 +       u32             reserved1;
 116 +       /* PORTSC: offset 0x20 for Faraday OTG */
 117 +       u32             port_status[1];
 118 +#endif
 119
 120         /* TXFILLTUNING: offset 0x24 */
 121         u32             txfill_tuning;  /* TX FIFO Tuning register */
 122 @@ -125,8 +130,11 @@ struct ehci_regs {
 123         u32             configured_flag;
 124  #define FLAG_CF                (1<<0)          /* true: we'll support "high speed" */
 125
 126 +#ifndef CONFIG_ARCH_GEMINI
 127         /* PORTSC: offset 0x44 */
 128         u32             port_status[0]; /* up to N_PORTS */
 129 +#endif
 130 +
 131  /* EHCI 1.1 addendum */
 132  #define PORTSC_SUSPEND_STS_ACK 0
 133  #define PORTSC_SUSPEND_STS_NYET 1