target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch

   1 From 2f08de94f207a4347053e1faa22c9a310c9c61b0 Mon Sep 17 00:00:00 2001
   2 From: Linus Walleij <linus.walleij@linaro.org>
   3 Date: Fri, 17 Nov 2017 16:36:32 +0100
   4 Subject: [PATCH 13/31] ARM: dts: Add basic devicetree for D-Link DNS-313
   5
   6 This adds a basic device tree for the D-Link DNS-313
   7 NAS enclosure. This device has a thermal sensor and a
   8 fan so we add a thermal zone for the chassis in the
   9 device tree based on information from the product.
  10
  11 Reviewed-by: Andrew Lunn <andrew@lunn.ch>
  12 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
  13 ---
  14  arch/arm/boot/dts/Makefile                 |   1 +
  15  arch/arm/boot/dts/gemini-dlink-dns-313.dts | 241 +++++++++++++++++++++++++++++
  16  2 files changed, 242 insertions(+)
  17  create mode 100644 arch/arm/boot/dts/gemini-dlink-dns-313.dts
  18
  19 --- a/arch/arm/boot/dts/Makefile
  20 +++ b/arch/arm/boot/dts/Makefile
  21 @@ -185,6 +185,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
  22         exynos5800-peach-pi.dtb
  23  dtb-$(CONFIG_ARCH_GEMINI) += \
  24         gemini-dlink-dir-685.dtb \
  25 +       gemini-dlink-dns-313.dtb \
  26         gemini-nas4220b.dtb \
  27         gemini-rut1xx.dtb \
  28         gemini-sq201.dtb \
  29 --- /dev/null
  30 +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
  31 @@ -0,0 +1,241 @@
  32 +// SPDX-License-Identifier: GPL-2.0
  33 +/*
  34 + * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
  35 + */
  36 +
  37 +/dts-v1/;
  38 +
  39 +#include "gemini.dtsi"
  40 +#include <dt-bindings/input/input.h>
  41 +#include <dt-bindings/thermal/thermal.h>
  42 +
  43 +/ {
  44 +       model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
  45 +       compatible = "dlink,dir-313", "cortina,gemini";
  46 +       #address-cells = <1>;
  47 +       #size-cells = <1>;
  48 +
  49 +       memory {
  50 +               /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
  51 +               device_type = "memory";
  52 +               reg = <0x00000000 0x4000000>;
  53 +       };
  54 +
  55 +       aliases {
  56 +               mdio-gpio0 = &mdio0;
  57 +       };
  58 +
  59 +       chosen {
  60 +               stdout-path = "uart0:19200n8";
  61 +       };
  62 +
  63 +       gpio_keys {
  64 +               compatible = "gpio-keys";
  65 +               #address-cells = <1>;
  66 +               #size-cells = <0>;
  67 +               button-esc {
  68 +                       debounce_interval = <50>;
  69 +                       wakeup-source;
  70 +                       linux,code = <KEY_ESC>;
  71 +                       label = "reset";
  72 +                       gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
  73 +               };
  74 +       };
  75 +
  76 +       leds {
  77 +               compatible = "gpio-leds";
  78 +               led-power {
  79 +                       label = "dns313:blue:power";
  80 +                       gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  81 +                       default-state = "on";
  82 +                       linux,default-trigger = "heartbeat";
  83 +               };
  84 +               led-disk-blue {
  85 +                       label = "dns313:blue:disk";
  86 +                       gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  87 +                       default-state = "off";
  88 +               };
  89 +               led-disk-green {
  90 +                       label = "dns313:green:disk";
  91 +                       gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
  92 +                       default-state = "off";
  93 +                       linux,default-trigger = "ide-disk";
  94 +                       /* Ideally should activate while reading */
  95 +               };
  96 +               led-disk-red {
  97 +                       label = "dns313:red:disk";
  98 +                       gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
  99 +                       default-state = "off";
 100 +                       /* Ideally should activate while writing */
 101 +               };
 102 +       };
 103 +
 104 +       /*
 105 +        * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
 106 +        */
 107 +       fan0: gpio-fan {
 108 +               compatible = "gpio-fan";
 109 +               gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
 110 +                       <&gpio0 12 GPIO_ACTIVE_HIGH>;
 111 +               gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
 112 +               cooling-min-level = <0>;
 113 +               cooling-max-level = <2>;
 114 +               #cooling-cells = <2>;
 115 +       };
 116 +
 117 +
 118 +       /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
 119 +       gpio-i2c {
 120 +               compatible = "i2c-gpio";
 121 +               sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 122 +               scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 123 +               #address-cells = <1>;
 124 +               #size-cells = <0>;
 125 +
 126 +               g751: temperature-sensor@48 {
 127 +                       compatible = "gmt,g751";
 128 +                       reg = <0x48>;
 129 +                       #thermal-sensor-cells = <0>;
 130 +               };
 131 +       };
 132 +
 133 +       thermal-zones {
 134 +               chassis-thermal {
 135 +                       /* Poll every 20 seconds */
 136 +                       polling-delay = <20000>;
 137 +                       /* Poll every 2nd second when cooling */
 138 +                       polling-delay-passive = <2000>;
 139 +
 140 +                       thermal-sensors = <&g751>;
 141 +
 142 +                       /* Tripping points from the fan.script in the rootfs */
 143 +                       trips {
 144 +                               chassis_alert0: chassis-alert0 {
 145 +                                       /* At 43 degrees turn on low speed */
 146 +                                       temperature = <43000>;
 147 +                                       hysteresis = <3000>;
 148 +                                       type = "active";
 149 +                               };
 150 +                               chassis_alert1: chassis-alert1 {
 151 +                                       /* At 47 degrees turn on high speed */
 152 +                                       temperature = <47000>;
 153 +                                       hysteresis = <3000>;
 154 +                                       type = "active";
 155 +                               };
 156 +                               chassis_crit: chassis-crit {
 157 +                                       /* Just shut down at 60 degrees */
 158 +                                       temperature = <60000>;
 159 +                                       hysteresis = <2000>;
 160 +                                       type = "critical";
 161 +                               };
 162 +                       };
 163 +
 164 +                       cooling-maps {
 165 +                               map0 {
 166 +                                       trip = <&chassis_alert0>;
 167 +                                       cooling-device = <&fan0 1 1>;
 168 +                               };
 169 +                               map1 {
 170 +                                       trip = <&chassis_alert1>;
 171 +                                       cooling-device = <&fan0 2 2>;
 172 +                               };
 173 +                       };
 174 +               };
 175 +       };
 176 +
 177 +       mdio0: ethernet-phy {
 178 +               compatible = "virtual,mdio-gpio";
 179 +               /* Uses MDC and MDIO */
 180 +               gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 181 +                       <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
 182 +               #address-cells = <1>;
 183 +               #size-cells = <0>;
 184 +
 185 +               /* This is a Realtek RTL8211B Gigabit ethernet transceiver */
 186 +               phy0: ethernet-phy@1 {
 187 +                       reg = <1>;
 188 +                       device_type = "ethernet-phy";
 189 +               };
 190 +       };
 191 +
 192 +       soc {
 193 +               flash@30000000 {
 194 +                       status = "okay";
 195 +                       /* 512KB of flash */
 196 +                       reg = <0x30000000 0x00080000>;
 197 +
 198 +                       /*
 199 +                        * This "RedBoot" is the Storlink derivative.
 200 +                        */
 201 +                       partition@0 {
 202 +                               label = "RedBoot";
 203 +                               reg = <0x00000000 0x00040000>;
 204 +                               read-only;
 205 +                       };
 206 +                       partition@40000 {
 207 +                               label = "MTD1";
 208 +                               reg = <0x00040000 0x00020000>;
 209 +                               read-only;
 210 +                       };
 211 +                       partition@60000 {
 212 +                               label = "MTD2";
 213 +                               reg = <0x00060000 0x00020000>;
 214 +                               read-only;
 215 +                       };
 216 +               };
 217 +
 218 +               syscon: syscon@40000000 {
 219 +                       pinctrl {
 220 +                               /*
 221 +                                */
 222 +                               gpio0_default_pins: pinctrl-gpio0 {
 223 +                                       mux {
 224 +                                               function = "gpio0";
 225 +                                               groups =
 226 +                                               /* Used by LEDs conflicts ICE */
 227 +                                               "gpio0bgrp",
 228 +                                               /* Used by ? conflicts ICE */
 229 +                                               "gpio0cgrp",
 230 +                                               /*
 231 +                                                * Used by fan & G751, conflicts LPC,
 232 +                                                * UART modem lines, SSP
 233 +                                                */
 234 +                                               "gpio0egrp",
 235 +                                               /* Used by G751 */
 236 +                                               "gpio0fgrp",
 237 +                                               /* Used by MDIO */
 238 +                                               "gpio0igrp";
 239 +                                       };
 240 +                               };
 241 +                               gpio1_default_pins: pinctrl-gpio1 {
 242 +                                       mux {
 243 +                                               function = "gpio1";
 244 +                                               /* Used by "reset" button */
 245 +                                               groups = "gpio1dgrp";
 246 +                                       };
 247 +                               };
 248 +                       };
 249 +               };
 250 +
 251 +               sata: sata@46000000 {
 252 +                       /* The ROM uses this muxmode */
 253 +                       cortina,gemini-ata-muxmode = <3>;
 254 +                       cortina,gemini-enable-sata-bridge;
 255 +                       status = "okay";
 256 +               };
 257 +
 258 +               gpio0: gpio@4d000000 {
 259 +                       pinctrl-names = "default";
 260 +                       pinctrl-0 = <&gpio0_default_pins>;
 261 +               };
 262 +
 263 +               gpio1: gpio@4e000000 {
 264 +                       pinctrl-names = "default";
 265 +                       pinctrl-0 = <&gpio1_default_pins>;
 266 +               };
 267 +
 268 +               ata@63000000 {
 269 +                       status = "okay";
 270 +               };
 271 +       };
 272 +};