2 # Copyright (C) 2009-2018 OpenWrt.org
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
7 include $(TOPDIR)/rules.mk
8 include $(INCLUDE_DIR)/image.mk
10 # Cook a "WRGG" image, this board is apparently one in the D-Link
11 # WRGG family and uses the exact same firmware format as other
13 define Build/dir685-image
17 -s wrgns01_dlwbr_dir685RBWW \
25 # Padding added after the rootfs to an even 128k boundary
26 # as this is 128k eraseblocks flash.
27 define Build/dir685-pad-rootfs
28 $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 128 >>$@
31 # Build D-Link DNS-313 images using the special header tool.
32 # rootfs.tgz and rd.tgz contains nothing, we only need them
33 # to satisfy the boot loader on the device. The zImage is
34 # the only real content.
35 define Build/dns313-images
37 chmod 755 $@.tmp/.boot
39 echo "dummy" > $@.tmp/dummyfile
41 dns313-header $@.tmp/dummyfile \
42 $@.tmp/.boot/rootfs.tgz
43 dns313-header $@.tmp/dummyfile \
45 dns313-header $(IMAGE_KERNEL) \
50 genext2fs --block-size $(BLOCKSIZE:%k=%Ki) \
51 --size-in-blocks $$((1024 * $(CONFIG_TARGET_KERNEL_PARTSIZE))) \
53 --root $@.tmp $@.tmp-boot
55 # The device firmware needs revision 1 of EXT2
56 tune2fs -O filetype $@.tmp-boot
57 e2fsck -pDf $@.tmp-boot > /dev/null
59 ./dns313_gen_hdd_img.sh $@ $@.tmp-boot $(IMAGE_ROOTFS) \
60 $(CONFIG_TARGET_KERNEL_PARTSIZE) \
61 $(CONFIG_TARGET_ROOTFS_PARTSIZE)
66 define Build/wiligear-image
67 $(STAGING_DIR_HOST)/bin/mkfwimage2 \
68 -m GEOS -f 0x30000000 -z \
69 -v $(1).v5.00.SL3512.OpenWrt.00000.000000.000000 \
70 -p Kernel:0x020000:0x100000:0:0:$(IMAGE_KERNEL) \
71 -p Ramdisk:0x120000:0x500000:0:0:$@ \
77 # Create the special NAS4220B and Itian Square One SQ201 image
78 # format with the squashfs and overlay inside the "rd.gz" file.
79 # We pad it out to 6144K which is the size of the initramfs partition.
81 # The "application" partition is just blank. You can put anything
82 # there when using OpenWRT. We just use that to create the
83 # "sysupgrade" firmware image.
84 define Build/nas4220b-sq201-images
88 dd if=/dev/zero of=$@.tmp/hddapp.tgz bs=6144k count=1
89 cp $(IMAGE_KERNEL) $@.tmp/zImage
90 cp ./ImageInfo-$(1) $@.tmp/ImageInfo
92 sed -i -e "s/DATESTR/`date +%Y%m%d $(if $(SOURCE_DATE_EPOCH),--date "@$(SOURCE_DATE_EPOCH)")`/g" $@.tmp/ImageInfo
94 (cd $@.tmp; tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ * \
95 $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)"))
100 # WBD-111 and WBD-222:
101 # work around the bootloader's bug with extra nops
102 # FIXME: is this really needed now that we no longer append the code
103 # to change the machine ID number? Needs testing on Wiliboard.
104 define Build/wbd-nops
106 echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $@
111 # All DTB files are prefixed with "gemini-"
112 define Device/Default
114 KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
115 KERNEL_NAME := zImage
116 KERNEL := kernel-bin | append-dtb
120 # A reasonable set of default packages handling the NAS type
121 # of devices out of the box (former NAS42x0 IcyBox defaults)
122 GEMINI_NAS_PACKAGES:=kmod-md-mod kmod-md-linear kmod-md-multipath \
123 kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
124 kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
125 kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
126 kmod-nls-utf8 kmod-usb-storage-extras \
127 samba36-server mdadm cfdisk fdisk e2fsprogs badblocks \
130 # The DIR-685 flash layout is kernel in WRGG format, padded and followed
131 # by the appended rootfs followed by some reasonable JFFS padding, the
132 # remainder will be used by JFFS2 through overlayfs.
134 # - For the factory image, the WRGG image includes the rootfs so that the
135 # default firmware will flash it properly as all it knows is WRGG format.
136 # - For the sysupgrade, we do not include the rootfs in the kernel image
137 # so it is not needelessly tossed into the RAM by the boot loader.
138 # This will be flashed from OpenWrt userland anyways so we only need
139 # the minimum to make the boot loader happy.
140 define Device/dlink_dir-685
141 DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
142 DEVICE_DTS := gemini-dlink-dir-685
143 DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
144 kmod-switch-rtl8366rb swconfig \
146 IMAGES := factory.bin
147 # Pad to 128k erase blocks with 160 bytes WRGG header
148 IMAGE/factory.bin := append-kernel | pad-offset 128k 160 | append-rootfs | dir685-pad-rootfs | dir685-image
150 TARGET_DEVICES += dlink_dir-685
152 define Device/dlink_dns-313
153 DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
154 DEVICE_DTS := gemini-dlink-dns-313
156 DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
159 IMAGES := factory.bin.gz
160 IMAGE/factory.bin.gz := dns313-images | gzip
162 TARGET_DEVICES += dlink_dns-313
164 define Device/itian-raidsonic
165 IMAGES := factory.bin
166 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 6144k | \
167 nas4220b-sq201-images $(1)
168 DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
171 define Device/itian_sq201
172 $(Device/itian-raidsonic)
173 DEVICE_TITLE := ITian Square One SQ201
174 DEVICE_DTS := gemini-sq201
175 DEVICE_PACKAGES += kmod-rt61-pci kmod-usb2-pci
177 TARGET_DEVICES += itian_sq201
179 define Device/raidsonic_ib-4220-b
180 $(Device/itian-raidsonic)
181 DEVICE_TITLE := Raidsonic NAS IB-4220-B
182 DEVICE_DTS := gemini-nas4220b
185 TARGET_DEVICES += raidsonic_ib-4220-b
187 # The wiliboard images need some changes to be functional and buildable.
189 # The dts would need to use the ecoscentric,redboot-fis-partitions partition
190 # parser to get the correct partition offsets and size.
192 # The mkfwimage2 call need to be adjusted to reflect the real size of kernel
193 # and rootfs. It is expected that the OEM firmware adjusts the on flash
194 # partition table with the values defined in the image header.
195 define Device/wiliboard_wbd111
196 DEVICE_TITLE := Wiliboard WBD-111
197 DEVICE_DTS := gemini-wbd111
198 KERNEL := kernel-bin | append-dtb | wbd-nops
199 IMAGES := factory.bin
200 IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WILIBOARD"
203 define Device/wiliboard_wbd222
204 DEVICE_TITLE := Wiliboard WBD-222
205 DEVICE_DTS := gemini-wbd222
206 KERNEL := kernel-bin | append-dtb | wbd-nops
207 IMAGES := factory.bin
208 IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WBD222"
211 $(eval $(call BuildImage))