target/linux/brcm63xx/dts/ct-5365.dts

   1 /dts-v1/;
   2
   3 #include "bcm6348.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend CT-5365";
   9         compatible = "comtrend,ct-5365", "brcm,bcm6348";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&gpio1 1 1>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27                 wlan {
  28                         label = "wlan";
  29                         gpios = <&gpio1 2 1>;
  30                         linux,code = <KEY_WLAN>;
  31                 };
  32                 wps {
  33                         label = "wps";
  34                         gpios = <&gpio1 3 1>;
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                 };
  37         };
  38
  39         gpio-leds {
  40                 compatible = "gpio-leds";
  41
  42                 power_green {
  43                         label = "96348A-122:green:power";
  44                         gpios = <&gpio0 0 1>;
  45                         default-state = "on";
  46                 };
  47                 alarm_red {
  48                         label = "96348A-122:red:alarm";
  49                         gpios = <&gpio0 2 1>;
  50                 };
  51                 wps_green {
  52                         label = "96348A-122:green:wps";
  53                         gpios = <&gpio0 6 1>;
  54                 };
  55         };
  56 };
  57
  58 &pflash {
  59         status = "ok";
  60
  61         linux,part-probe = "bcm63xxpart";
  62
  63         cfe@0 {
  64                 label = "CFE";
  65                 reg = <0x000000 0x010000>;
  66                 read-only;
  67         };
  68
  69         linux@10000 {
  70                 label = "linux";
  71                 reg = <0x010000 0x3e0000>;
  72         };
  73
  74         nvram@3f0000 {
  75                 label = "nvram";
  76                 reg = <0x3f0000 0x010000>;
  77         };
  78 };