target/linux/brcm63xx/dts/bcm6318.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm6318";
   5
   6         aliases {
   7                 pinctrl = &pinctrl;
   8                 serial0 = &uart0;
   9                 spi1 = &hsspi;
  10         };
  11
  12         cpus {
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15
  16                 cpu@0 {
  17                         compatible = "brcm,bmips3300", "mips,mips4Kc";
  18                         device_type = "cpu";
  19                         reg = <0>;
  20                 };
  21         };
  22
  23         cpu_intc: interrupt-controller {
  24                 #address-cells = <0>;
  25                 compatible = "mti,cpu-interrupt-controller";
  26
  27                 interrupt-controller;
  28                 #interrupt-cells = <1>;
  29         };
  30
  31         memory { device_type = "memory"; reg = <0 0>; };
  32
  33         ubus@10000000 {
  34                 #address-cells = <1>;
  35                 #size-cells = <1>;
  36                 ranges;
  37                 compatible = "simple-bus";
  38                 interrupt-parent = <&periph_intc>;
  39
  40                 ext_intc: interrupt-controller@10000018 {
  41                         compatible = "brcm,bcm6318-ext-intc";
  42                         reg = <0x10000018 0x4>;
  43
  44                         interrupt-controller;
  45                         #interrupt-cells = <2>;
  46
  47                         interrupts = <24>, <25>, <26>, <27>;
  48                 };
  49
  50                 periph_intc: interrupt-controller@10000020 {
  51                         compatible = "brcm,bcm6345-l1-intc";
  52                         reg = <0x10000020 0x20>;
  53
  54                         interrupt-controller;
  55                         #interrupt-cells = <1>;
  56
  57                         interrupt-parent = <&cpu_intc>;
  58                         interrupts = <2>;
  59                 };
  60
  61                 pinctrl: pin-controller@10000080 {
  62                         compatible = "brcm,bcm6318-pinctrl";
  63                         reg = <0x10000080 0x08>,
  64                               <0x10000088 0x08>,
  65                               <0x10000098 0x04>,
  66                               <0x1000009c 0x0c>,
  67                               <0x100000d4 0x18>;
  68                         reg-names = "dirout", "dat", "mode", "mux", "pad";
  69
  70                         gpio-controller;
  71                         #gpio-cells = <2>;
  72
  73                         interrupt-parent = <&ext_intc>;
  74                         interrupts = <0 0>, <1 0>;
  75                         interrupt-names = "gpio33", "gpio34";
  76
  77                         pinctrl_ephy0_spd_led: ephy0_spd_led {
  78                                 function = "ephy0_spd_led";
  79                                 pins = "gpio0";
  80                         };
  81
  82                         pinctrl_ephy1_spd_led: ephy1_spd_led {
  83                                 function = "ephy1_spd_led";
  84                                 pins = "gpio1";
  85                         };
  86
  87                         pinctrl_ephy2_spd_led: ephy2_spd_led {
  88                                 function = "ephy2_spd_led";
  89                                 pins = "gpio2";
  90                         };
  91
  92                         pinctrl_ephy3_spd_led: ephy3_spd_led {
  93                                 function = "ephy3_spd_led";
  94                                 pins = "gpio3";
  95                         };
  96
  97                         pinctrl_ephy0_act_led: ephy0_act_led {
  98                                 function = "ephy0_act_led";
  99                                 pins = "gpio4";
 100                         };
 101
 102                         pinctrl_ephy1_act_led: ephy1_act_led {
 103                                 function = "ephy1_act_led";
 104                                 pins = "gpio5";
 105                         };
 106
 107                         pinctrl_ephy2_act_led: ephy2_act_led {
 108                                 function = "ephy2_act_led";
 109                                 pins = "gpio6";
 110                         };
 111
 112                         pinctrl_ephy3_act_led: ephy3_act_led {
 113                                 function = "ephy3_act_led";
 114                                 pins = "gpio7";
 115                         };
 116
 117                         pinctrl_serial_led: serial_led {
 118                                 pinctrl_serial_led_data: serial_led_data {
 119                                         function = "serial_led_data";
 120                                         pins = "gpio6";
 121                                 };
 122
 123                                 pinctrl_serial_led_clk: serial_led_clk {
 124                                         function = "serial_led_clk";
 125                                         pins = "gpio7";
 126                                 };
 127                         };
 128
 129                         pinctrl_inet_act_led: inet_act_led {
 130                                 function = "inet_act_led";
 131                                 pins = "gpio8";
 132                         };
 133
 134                         pinctrl_inet_fail_led: inet_fail_led {
 135                                 function = "inet_fail_led";
 136                                 pins = "gpio9";
 137                         };
 138
 139                         pinctrl_dsl_led: dsl_led {
 140                                 function = "dsl_led";
 141                                 pins = "gpio10";
 142                         };
 143
 144                         pinctrl_post_fail_led: post_fail_led {
 145                                 function = "post_fail_led";
 146                                 pins = "gpio11";
 147                         };
 148
 149                         pinctrl_wlan_wps_led: wlan_wps_led {
 150                                 function = "wlan_wps_led";
 151                                 pins = "gpio12";
 152                         };
 153
 154                         pinctrl_usb_pwron: usb_pwron {
 155                                 function = "usb_pwron";
 156                                 pins = "gpio13";
 157                         };
 158
 159                         pinctrl_usb_device_led: usb_device_led {
 160                                 function = "usb_device_led";
 161                                 pins = "gpio13";
 162                         };
 163
 164                         pinctrl_usb_active: usb_active {
 165                                 function = "usb_active";
 166                                 pins = "gpio40";
 167                         };
 168                 };
 169
 170                 uart0: serial@10000100 {
 171                         compatible = "brcm,bcm6345-uart";
 172                         reg = <0x10000100 0x18>;
 173
 174                         interrupt-parent = <&periph_intc>;
 175                         interrupts = <28>;
 176
 177                         /* clocks = <&periph_clk>; */
 178                         /* clock-names = "refclk"; */
 179
 180                         status = "disabled";
 181                 };
 182
 183                 leds: led-controller@10000200 {
 184                         #address-cells = <1>;
 185                         #size-cells = <0>;
 186                         compatible = "brcm,bcm6328-leds";
 187                         reg = <0x10000200 0x24>;
 188                         status = "disabled";
 189                 };
 190
 191                 hsspi: spi@10003000 {
 192                         #address-cells = <1>;
 193                         #size-cells = <0>;
 194                         compatible = "brcm,bcm6328-hsspi";
 195                         reg = <0x10003000 0x600>;
 196                         interrupts = <29>;
 197                         /* clocks = <&clkctl 25>; */
 198                 };
 199         };
 200 };