target/linux/brcm63xx/dts/bcm6318-sagem-fast-2704n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6318.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@ST2704N";
   9         compatible = "sagem,fast-2704n", "brcm,bcm6318";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 wlan {
  23                         label = "wlan";
  24                         gpios = <&pinctrl 1 0>;
  25                         linux,code = <KEY_WLAN>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&pinctrl 33 1>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&pinctrl 34 1>;
  39                         linux,code = <KEY_RESTART>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 wps_green {
  48                         label = "F@ST2704N:green:wps";
  49                         gpios = <&pinctrl 2 1>;
  50                 };
  51                 lan1_green {
  52                         label = "F@ST2704N:green:lan1";
  53                         gpios = <&pinctrl 4 1>;
  54                 };
  55                 lan2_green {
  56                         label = "F@ST2704N:green:lan2";
  57                         gpios = <&pinctrl 5 1>;
  58                 };
  59                 lan3_green {
  60                         label = "F@ST2704N:green:lan3";
  61                         gpios = <&pinctrl 6 1>;
  62                 };
  63                 lan4_green {
  64                         label = "F@ST2704N:green:lan4";
  65                         gpios = <&pinctrl 7 1>;
  66                 };
  67                 inet_green {
  68                         label = "F@ST2704N:green:inet";
  69                         gpios = <&pinctrl 8 1>;
  70                 };
  71                 inet_red {
  72                         label = "F@ST2704N:red:inet";
  73                         gpios = <&pinctrl 9 1>;
  74                 };
  75                 dsl_green {
  76                         label = "F@ST2704N:green:dsl";
  77                         gpios = <&pinctrl 10 1>;
  78                 };
  79                 power_red {
  80                         label = "F@ST2704N:red:power";
  81                         gpios = <&pinctrl 11 1>;
  82                 };
  83                 power_green {
  84                         label = "F@ST2704N:green:power";
  85                         gpios = <&pinctrl 47 1>;
  86                         default-state = "on";
  87                 };
  88                 usb_green {
  89                         label = "F@ST2704N:green:usb";
  90                         gpios = <&pinctrl 49 1>;
  91                 };
  92         };
  93 };
  94
  95 &hsspi {
  96         status = "ok";
  97
  98         flash@0 {
  99                 compatible = "jedec,spi-nor";
 100                 spi-max-frequency = <62500000>;
 101                 spi-tx-bus-width = <2>;
 102                 spi-rx-bus-width = <2>;
 103                 reg = <0>;
 104
 105                 #address-cells = <1>;
 106                 #size-cells = <1>;
 107
 108                 partitions {
 109                         compatible = "fixed-partitions";
 110                         #address-cells = <1>;
 111                         #size-cells = <1>;
 112
 113                         cfe@0 {
 114                                 reg = <0x000000 0x010000>;
 115                                 label = "cfe";
 116                                 read-only;
 117                         };
 118
 119                         linux@10000 {
 120                                 reg = <0x010000 0x7e0000>;
 121                                 label = "linux";
 122                                 compatible = "brcm,bcm963xx-imagetag";
 123                         };
 124
 125                         nvram@7f0000 {
 126                                 reg = <0x7f0000 0x010000>;
 127                                 label = "nvram";
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &uart0 {
 134         status = "ok";
 135 };