target/linux/brcm63xx/dts/a4001n1.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ADB P.DG A4001N1";
   9         compatible = "adb,a4001n1", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&pinctrl 23 1>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28                 wps {
  29                         label = "wlan";
  30                         gpios = <&pinctrl 24 1>;
  31                         linux,code = <KEY_WLAN>;
  32                 };
  33         };
  34
  35         gpio-leds {
  36                 compatible = "gpio-leds";
  37
  38                 inet_red {
  39                         label = "A4001N1:red:inet";
  40                         gpios = <&pinctrl 2 1>;
  41                 };
  42                 ppp_green {
  43                         label = "A4001N1:green:ppp";
  44                         gpios = <&pinctrl 3 1>;
  45                 };
  46                 power_green {
  47                         label = "A4001N1:green:power";
  48                         gpios = <&pinctrl 4 1>;
  49                         default-state = "on";
  50                 };
  51                 ppp_red {
  52                         label = "A4001N1:red:ppp";
  53                         gpios = <&pinctrl 5 1>;
  54                 };
  55                 usb_green {
  56                         label = "A4001N1:green:3g";
  57                         gpios = <&pinctrl 6 1>;
  58                 };
  59                 usb_red {
  60                         label = "A4001N1:red:3g";
  61                         gpios = <&pinctrl 7 1>;
  62                 };
  63                 power_red {
  64                         label = "A4001N1:red:power";
  65                         gpios = <&pinctrl 8 1>;
  66                 };
  67                 wlan_green {
  68                         label = "A4001N1:green:wlan";
  69                         gpios = <&pinctrl 9 1>;
  70                 };
  71                 wlan_red {
  72                         label = "A4001N1:red:wlan";
  73                         gpios = <&pinctrl 10 1>;
  74                 };
  75                 inet_green {
  76                         label = "A4001N1:green:inet";
  77                         gpios = <&pinctrl 11 1>;
  78                 };
  79                 eth_red {
  80                         label = "A4001N1:red:eth";
  81                         gpios = <&pinctrl 20 1>;
  82                 };
  83                 eth_green {
  84                         label = "A4001N1:green:eth";
  85                         gpios = <&pinctrl 31 1>;
  86                 };
  87         };
  88 };
  89
  90 &hsspi {
  91         status = "ok";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 spi-max-frequency = <16666667>;
  96                 spi-tx-bus-width = <2>;
  97                 spi-rx-bus-width = <2>;
  98                 reg = <0>;
  99
 100                 #address-cells = <1>;
 101                 #size-cells = <1>;
 102
 103                 partitions {
 104                         compatible = "fixed-partitions";
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         cfe@0 {
 109                                 reg = <0x000000 0x010000>;
 110                                 label = "cfe";
 111                                 read-only;
 112                         };
 113
 114                         linux@10000 {
 115                                 reg = <0x010000 0xfe0000>;
 116                                 label = "linux";
 117                                 compatible = "brcm,bcm963xx-imagetag";
 118                         };
 119
 120                         nvram@ff0000 {
 121                                 reg = <0xff0000 0x010000>;
 122                                 label = "nvram";
 123                         };
 124                 };
 125         };
 126 };
 127
 128 &uart0 {
 129         status = "ok";
 130 };