1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2006 OpenWrt.org
7 [ -e /etc/config/network ] && {
18 append batch "delete network.eth0.${1}${N}"
19 append batch "set network.eth0_${id}=switch_vlan${N}"
20 append batch "set network.eth0_${id}.device=eth0${N}"
21 append batch "set network.eth0_${id}.vlan=${id}${N}"
22 append batch "set network.eth0_${id}.ports='${ports}'${N}"
37 logger -t netconfig "migrating switch config to new format ..."
38 echo "$batch${N}commit network" | uci batch
47 [ -e /sbin/swconfig ] && cpuport=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")
48 local model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
51 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
53 echo boardtype=wgt634u
55 strings "$(find_mtd_part nvram)"
57 ) | awk -v cpuport="$cpuport" -v model="$model" '
58 function macinc(mac, maca, i, result) {
60 for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
61 if (++maca[6] > 0xff) {
65 for (i = 1; i <= 6; i++) {
66 if (i != 1) result = result ":"
67 result = result sprintf("%02x", maca[i])
74 c["lan_ifname"]="eth0.1"
75 c["wan_ifname"]="eth0.2"
76 c["vlan1ports"]="1 2 3 4 5t"
77 c["vlan2ports"]="0 5t"
78 for (i = 0; i < 6; i++) {
79 if (mac_check != "") mac_check = mac_check ":"
80 mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
83 c["vlan1ports"]="1 2 3 4 8t"
84 c["vlan2ports"]="0 8t"
88 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \
89 ($1 ~ /^vlan[0-9]{1,2}ports$/) {
94 if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
95 ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8"))) || \
96 ((nvram["vlan2ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8")))) {
97 c["vlan1ports"] = "0 1 2 3 8t"
98 c["vlan2ports"] = "4 8t"
100 if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
101 ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5"))) || \
102 ((nvram["vlan2ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5")))) {
103 c["vlan1ports"] = "0 1 2 3 5t"
104 c["vlan2ports"] = "4 5t"
106 if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
108 c["lan_ifname"] = "eth1"
110 if (model == "ASUS WL-330gE") {
112 c["lan_ifname"] = "eth0.1"
113 c["vlan1ports"] = "4 5t"
116 if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
117 c["wan_ifname"] = "eth1"
118 c["lan_ifname"] = "eth0"
120 if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
121 c["vlan1ports"] = "0 1 2 3 5t"
122 c["vlan2ports"] = "4 5t"
124 if (model == "Dell TrueMobile 2300") {
125 c["lan_ifname"] = "eth0"
126 c["wan_ifname"] = "eth1"
127 c["vlan1ports"] = "0 1 2 3 4 5"
130 if (nvram["boardtype"] == "bcm94710r4") {
132 c["lan_ifname"] = "eth0"
133 c["wan_ifname"] = "eth1"
135 if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
136 c["vlan1ports"] = "0 1 2 3 5t"
137 c["vlan2ports"] = "4 5t"
139 if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
140 if (nvram["boardnum"] == "45") {
142 c["vlan1ports"] = "1 2 3 4 5t"
143 c["vlan2ports"] = "0 5t"
146 c["vlan1ports"] = "0 1 2 3 4 5"
148 c["lan_ifname"] = "eth0"
149 c["wan_ifname"] = "eth1"
151 # MAC addresses on 4704 tend to be screwed up. Add a workaround here
152 if (nvram["et0macaddr"] ~ mac_check) {
153 c["lan_macaddr"] = nvram["et0macaddr"]
154 c["wan_macaddr"] = macinc(c["lan_macaddr"])
158 # Buffalo WBR-B11 and Buffalo WBR-G54
159 if (nvram["boardtype"] == "bcm94710ap") {
160 c["vlan1ports"] = "0 1 2 3 4 5"
162 c["lan_ifname"] = "eth0"
163 c["wan_ifname"] = "eth1"
167 if ((nvram["boardnum"] == "2") || \
168 (nvram["boardnum"] == "1024")) {
169 c["lan_ifname"]="eth0"
174 if ((nvram["boardum"] == "2") && \
175 (nvram["GemtekPmonVer"] == "1")) {
176 c["lan_ifname"]="eth0"
181 # These are actually same as defaults above. For some reason this script applies
182 # Generic BCM94704 settings instead so we revert to proper settings here.
183 # Hopefully someone will fix this properly soon.
184 if (model == "ASUS WL-700gE") {
185 c["lan_ifname"]="eth0.1"
186 c["wan_ifname"]="eth0.2"
187 c["vlan1ports"]="1 2 3 4 5t"
188 c["vlan2ports"]="0 5t"
190 if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) {
191 c["vlan1ports"]="0 1 2 3 5t"
192 c["vlan2ports"]="4 5t"
194 if (model == "ASUS WL-500W") {
195 c["lan_ifname"] = "eth0"
196 c["wan_ifname"] = "eth1"
197 c["vlan1ports"] = "0 1 2 3 4 5"
200 if (model == "OvisLink WL-1600GL") {
201 c["lan_ifname"] = "eth0.1"
202 c["wan_ifname"] = "eth0.2"
203 c["vlan1ports"] = "0 1 2 3 5t"
204 c["vlan2ports"] = "4 5t"
206 if (model == "SimpleTech SimpleShare NAS") {
207 c["lan_ifname"] = "eth0"
212 print "local vlan1ports=\"" c["vlan1ports"] "\";"
213 print "local vlan2ports=\"" c["vlan2ports"] "\";"
214 print "local lan_ifname=\"" c["lan_ifname"] "\";"
215 print "local lan_macaddr=\"" c["lan_macaddr"] "\";"
216 print "local wan_ifname=\"" c["wan_ifname"] "\";"
217 print "local wan_macaddr=\"" c["wan_macaddr"] "\";"
220 . /lib/functions/uci-defaults.sh
222 touch /etc/config/network
226 [ -n "$vlan1ports" -o -n "$vlan2ports" ] && {
227 local cfg=`ucidef_add_switch "switch0" 1 1`
228 [ -n "$cfg" ] && uci rename network.$cfg=eth0
229 [ -n "$vlan1ports" ] && {
230 cfg=`ucidef_add_switch_vlan "switch0" 1 "$vlan1ports"`
231 [ -n "$cfg" ] && uci rename network.$cfg=eth0_1
233 [ -n "$vlan2ports" ] && {
234 cfg=`ucidef_add_switch_vlan "switch0" 2 "$vlan2ports"`
235 [ -n "$cfg" ] && uci rename network.$cfg=eth0_2
239 ucidef_set_interface_loopback
241 ucidef_set_interface_lan "$lan_ifname"
242 [ -n "$lan_macaddr" ] && ucidef_set_interface_macaddr lan "$lan_macaddr"
244 [ -n "$wan_ifname" ] && {
245 ucidef_set_interface_wan "$wan_ifname"
246 [ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr wan "$wan_macaddr"